Material Safety Data Sheet
|
|
- Flora Gibson
- 5 years ago
- Views:
Transcription
1 1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Automotive and industrial grease. Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX USA MSDS Request : Emergency Telephone Number Spill Information : Health Information : COMPOSITION/INFORMATION ON INGREDIENTS A lubricating grease consisting of highly-refined mineral oil and additives. The highly refined mineral oil contains <3% (w/w) DMSO-extract, according to IP HAZARDS IDENTIFICATION Emergency Overview Appearance and Odour : Dark brown. Semi-solid at ambient temperature. Slight hydrocarbon. Health Hazards : High-pressure injection under the skin may cause serious damage including local necrosis. Safety Hazards : Not classified as flammable but will burn. Environmental Hazards : Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Health Hazards Health Hazards Inhalation Skin Contact Eye Contact Ingestion Other Information Signs and Symptoms : Not expected to be a health hazard when used under normal conditions. : Under normal conditions of use, this is not expected to be a primary route of exposure. : Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin resulting in disorders such as oil acne/folliculitis. : May cause slight irritation to eyes. : Low toxicity if swallowed. : High-pressure injection under the skin may cause serious damage including local necrosis. Used grease may contain harmful impurities. : Local necrosis is evidenced by delayed onset of pain and tissue damage a few hours following injection. Oil acne/folliculitis signs and symptoms may include formation of black pustules and 1/8
2 Aggravated Medical Condition Environmental Hazards spots on the skin of exposed areas. Ingestion may result in nausea, vomiting and/or diarrhoea. : Pre-existing medical conditions of the following organ(s) or organ system(s) may be aggravated by exposure to this material: Skin. : Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Additional Information : Under normal conditions of use or in a foreseeable emergency, this product does not meet the definition of a hazardous chemical when evaluated according to the OSHA Hazard Communication Standard, 29 CFR. 4. FIRST AID MEASURES General Information : Not expected to be a health hazard when used under normal conditions. Inhalation : No treatment necessary under normal conditions of use. If symptoms persist, obtain medical advice. Skin Contact : Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if available. If persistent irritation occurs, obtain medical attention. When using high pressure equipment, injection of product under the skin can occur. If high pressure injuries occur, the casualty should be sent immediately to a hospital. Do not wait for symptoms to develop. Obtain medical attention even in the absence of apparent wounds. Eye Contact : Flush eye with copious quantities of water. If persistent irritation occurs, obtain medical attention. Ingestion : In general no treatment is necessary unless large quantities are swallowed, however, get medical advice. Advice to Physician : Treat symptomatically. High pressure injection injuries require prompt surgical intervention and possibly steroid therapy, to minimise tissue damage and loss of function. Because entry wounds are small and do not reflect the seriousness of the underlying damage, surgical exploration to determine the extent of involvement may be necessary. Local anaesthetics or hot soaks should be avoided because they can contribute to swelling, vasospasm and ischaemia. Prompt surgical decompression, debridement and evacuation of foreign material should be performed under general anaesthetics, and wide exploration is essential. 5. FIRE FIGHTING MEASURES Clear fire area of all non-emergency personnel. Flash point : > 150 C / 302 F (COC) Upper / lower : Typical 1-10 %(V)(based on mineral oil) Flammability or Explosion limits Auto ignition temperature : > 320 C / 608 F Specific Hazards : Hazardous combustion products may include: A complex 2/8
3 Suitable Extinguishing Media Unsuitable Extinguishing Media Protective Equipment for Firefighters mixture of airborne solid and liquid particulates and gases (smoke). Carbon monoxide. Unidentified organic and inorganic compounds. : Foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may be used for small fires only. : Do not use water in a jet. : Proper protective equipment including breathing apparatus must be worn when approaching a fire in a confined space. 6. ACCIDENTAL RELEASE MEASURES Avoid contact with spilled or released material. For guidance on selection of personal protective equipment see Chapter 8 of this. See Chapter 13 for information on disposal. Observe the relevant local and international regulations. Protective measures : Avoid contact with skin and eyes. Use appropriate containment to avoid environmental contamination. Prevent from spreading or entering drains, ditches or rivers by using sand, earth, or other appropriate barriers. Clean Up Methods : Shovel into a suitable clearly marked container for disposal or reclamation in accordance with local regulations. 7. HANDLING AND STORAGE General Precautions : Use local exhaust ventilation if there is risk of inhalation of vapours, mists or aerosols. Properly dispose of any contaminated rags or cleaning materials in order to prevent fires. Use the information in this data sheet as input to a risk assessment of local circumstances to help determine appropriate controls for safe handling, storage and disposal of this material. Handling : Avoid prolonged or repeated contact with skin. Avoid inhaling vapour and/or mists. When handling product in drums, safety footwear should be worn and proper handling equipment should be used. Storage : Keep container tightly closed and in a cool, well-ventilated place. Use properly labelled and closeable containers. Storage Temperature: 0-50 C / F Recommended Materials : For containers or container linings, use mild steel or high density polyethylene. Unsuitable Materials : PVC. Additional Information : Polyethylene containers should not be exposed to high temperatures because of possible risk of distortion. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Occupational Exposure Limits Material Source Type ppm mg/m3 Notation 3/8
4 Oil mist, mineral Oil mist, mineral Oil mist, mineral ACGIH TWA(Inhalabl e fraction.) 5 mg/m3 OSHA Z1 PEL(Mist.) 5 mg/m3 OSHA Z1A TWA(Mist.) 5 mg/m3 Additional Information : Due to the product's semi-solid consistency, generation of mists and dusts is unlikely to occur. Shell has adopted as Interim Standards the OSHA Z1A values that were established in 1989 and later rescinded. Exposure Controls : The level of protection and types of controls necessary will vary depending upon potential exposure conditions. Select controls based on a risk assessment of local circumstances. Appropriate measures include: Adequate ventilation to control airborne concentrations. Where material is heated, sprayed or mist formed, there is greater potential for airborne concentrations to be generated. Personal Protective Equipment : Personal protective equipment (PPE) should meet recommended national standards. Check with PPE suppliers. Respiratory Protection : No respiratory protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices, precautions should be taken to avoid breathing of material. If engineering controls do not maintain airborne concentrations to a level which is adequate to protect worker health, select respiratory protection equipment suitable for the specific conditions of use and meeting relevant legislation. Check with respiratory protective equipment suppliers. Where air-filtering respirators are suitable, select an appropriate combination of mask and filter. Select a filter suitable for combined particulate/organic gases and vapours [boiling point >65 C(149 F)]. Hand Protection : Where hand contact with the product may occur the use of gloves approved to relevant standards (e.g. Europe: EN374, US: F739) made from the following materials may provide suitable chemical protection: PVC, neoprene or nitrile rubber gloves. Suitability and durability of a glove is dependent on usage, e.g. frequency and duration of contact, chemical resistance of glove material, glove thickness, dexterity. Always seek advice from glove suppliers. Contaminated gloves should be replaced. Personal hygiene is a key element of effective hand care. Gloves must only be worn on clean hands. After using gloves, hands should be washed and dried thoroughly. Application of a non-perfumed moisturizer is recommended. Eye Protection : Wear safety glasses or full face shield if splashes are likely to occur. Protective Clothing : Skin protection not ordinarily required beyond standard issue work clothes. Monitoring Methods : Monitoring of the concentration of substances in the breathing zone of workers or in the general workplace may be required to confirm compliance with an OEL and adequacy of exposure 4/8
5 Environmental Exposure Controls controls. For some substances biological monitoring may also be appropriate. : Minimise release to the environment. An environmental assessment must be made to ensure compliance with local environmental legislation. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : Dark brown. Semi-solid at ambient temperature. Odour : Slight hydrocarbon. ph : Not applicable. Initial Boiling Point and : Data not available Boiling Range Dropping point : > 160 C / 320 F Flash point : > 150 C / 302 F (COC) Upper / lower Flammability : Typical 1-10 %(V) (based on mineral oil) or Explosion limits Auto-ignition temperature : > 320 C / 608 F Vapour pressure : < 0.5 Pa at 20 C / 68 F (estimated value(s)) Specific gravity : Typical at 15 C / 59 F Density : Typical 900 kg/m3 at 15 C / 59 F Water solubility : Negligible. n-octanol/water partition : > 6 (based on information on similar products) coefficient (log Pow) Kinematic viscosity : Not applicable. Vapour density (air=1) : > 1 (estimated value(s)) Evaporation rate (nbuac=1) : Data not available 10. STABILITY AND REACTIVITY Stability Conditions to Avoid Materials to Avoid Hazardous Decomposition Products : Stable. : Extremes of temperature and direct sunlight. : Strong oxidising agents. : Hazardous decomposition products are not expected to form during normal storage. 11. TOXICOLOGICAL INFORMATION Basis for Assessment : Information given is based on data on the components and the toxicology of similar products. Acute Oral Toxicity : Expected to be of low toxicity: LD50 > 5000 mg/kg, Rat Acute Dermal Toxicity : Expected to be of low toxicity: LD50 > 5000 mg/kg, Rabbit Acute Inhalation Toxicity : Not considered to be an inhalation hazard under normal conditions of use. Skin Irritation : Expected to be slightly irritating. Prolonged or repeated skin contact without proper cleaning can clog the pores of the skin resulting in disorders such as oil acne/folliculitis. Eye Irritation : Expected to be slightly irritating. Respiratory Irritation : Inhalation of vapours or mists may cause irritation. Sensitisation : Not expected to be a skin sensitiser. Repeated Dose Toxicity : Not expected to be a hazard. 5/8
6 Mutagenicity : Not considered a mutagenic hazard. Carcinogenicity : Product contains mineral oils of types shown to be noncarcinogenic in animal skin-painting studies. Highly refined mineral oils are not classified as carcinogenic by the International Agency for Research on Cancer (IARC). Other components are not known to be associated with carcinogenic effects. Material : Carcinogenicity Classification Teflon : IARC 3: Not classifiable as to carcinogenicity to humans. Reproductive and : Not expected to be a hazard. Developmental Toxicity Additional Information : Used grease may contain harmful impurities that have accumulated during use. The concentration of such harmful impurities will depend on use and they may present risks to health and the environment on disposal. ALL used grease should be handled with caution and skin contact avoided as far as possible. High pressure injection of product into the skin may lead to local necrosis if the product is not surgically removed. 12. ECOLOGICAL INFORMATION Ecotoxicological data have not been determined specifically for this product. Information given is based on a knowledge of the components and the ecotoxicology of similar products. Acute Toxicity : Poorly soluble mixture. May cause physical fouling of aquatic organisms. Expected to be harmful: LL/EL/IL mg/l (to aquatic organisms) (LL/EL50 expressed as the nominal amount of product required to prepare aqueous test extract). Mobility : Semi-solid under most environmental conditions. Floats on water. If it enters soil, it will adsorb to soil particles and will not be mobile. Persistence/degradability : Expected to be not readily biodegradable. Major constituents are expected to be inherently biodegradable, but the product contains components that may persist in the environment. Bioaccumulation : Contains components with the potential to bioaccumulate. Other Adverse Effects : Product is a mixture of non-volatile components, which are not expected to be released to air in any significant quantities. Not expected to have ozone depletion potential, photochemical ozone creation potential or global warming potential. 13. DISPOSAL CONSIDERATIONS Material Disposal : Recover or recycle if possible. It is the responsibility of the waste generator to determine the toxicity and physical properties of the material generated to determine the proper waste classification and disposal methods in compliance with applicable regulations. Do not dispose into the environment, in drains or in water courses. 6/8
7 Container Disposal : Dispose in accordance with prevailing regulations, preferably to a recognised collector or contractor. The competence of the collector or contractor should be established beforehand. Local Legislation : Disposal should be in accordance with applicable regional, national, and local laws and regulations. 14. TRANSPORT INFORMATION US Department of Transportation Classification (49CFR) This material is not subject to DOT regulations under 49 CFR Parts IMDG This material is not classified as dangerous under IMDG regulations. IATA (Country variations may apply) This material is not classified as dangerous under IATA regulations. 15. REGULATORY INFORMATION The regulatory information is not intended to be comprehensive. Other regulations may apply to this material. Notification Status Federal Regulatory Status EINECS TSCA DSL All components listed or polymer exempt. All components listed. All components listed. Comprehensive Environmental Release, Compensation & Liability Act (CERCLA) Shell Gadus S2 High Speed Coupling GreaseHigh Speed Coupling Grease () Reportable quantity: 37 lbs Zinc compounds, NOS ( ) Shell classifies this material as an "oil" under the CERCLA Petroleum Exclusion, therefore releases to the environment are not reportable under CERCLA. SARA Hazard Categories (311/312) No SARA 311/312 Hazards. SARA Toxic Release Inventory (TRI) (313) 7/8
8 Zinc compounds, NOS ( ) 2.70% State Regulatory Status California Safe Drinking Water and Toxic Enforcement Act (Proposition 65) This material does not contain any chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. New Jersey Right-To-Know Chemical List Zinc compounds, NOS ( ) Listed. Pennsylvania Right-To-Know Chemical List Teflon ( ) Listed. 16. OTHER INFORMATION NFPA Rating (Health, : 0, 1, 0 Fire, Reactivity) MSDS Version Number : 1.0 MSDS Effective Date : 02/09/2011 MSDS Revisions : A vertical bar ( ) in the left margin indicates an amendment from the previous version. MSDS Regulation : The content and format of this MSDS is in accordance with the OSHA Hazard Communication Standard, 29 CFR. MSDS Distribution : The information in this document should be made available to all who may handle the product. Disclaimer : The information contained herein is based on our current knowledge of the underlying data and is intended to describe the product for the purpose of health, safety and environmental requirements only. No warranty or guarantee is expressed or implied regarding the accuracy of these data or the results to be obtained from the use of the product. 8/8
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Automotive and industrial grease. Manufacturer/Supplier : SOPUS Products PO Box 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Hydraulic oil Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285 Emergency Telephone
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Automotive and industrial grease. Manufacturer/Supplier : Shell Oil Products US PO BOX 4453 Houston, TX 77210-4453 USA MSDS Request : 877-276-7285
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Hydraulic oil Manufacturer/Supplier : SOPUS Products PO Box 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285 Emergency Telephone
Ocean State Oil Material Safety Data Sheet May 29, 2009
Ocean State Oil Material Safety Data Sheet 1. Chemical Product and Company Identification Material Name: Ocean State Way Lube 68 Manufacturer: Ocean State Oil 123 Ocean State Drive North Kingstown, RI
Chemical Name: Aeroshell Grease 7. Manufacturer: Shell. Container size: 14.1 oz. Location: VLA. Disposal: Place empty container in trash.
Chemical Name: Aeroshell Grease 7 Manufacturer: Shell Container size: 14.1 oz Location: VLA Disposal: Place empty container in trash. 1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Synthetic
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Machine oil. Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285 Emergency Telephone
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Automotive and industrial grease. Product Code : 001D8448 Manufacturer/Supplier : The Shell Company of Thailand
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Automotive and industrial grease. Product Code : 001A0400 Manufacturer/Supplier : Shell South Africa Marketing
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Hydraulic oil Product Code : 001B0670 Manufacturer/Supplier : Café Soluble S.A. Carretera Norte km. 8 Managua
COMPOSITION/INFORMATION ON INGREDIENTS
PRODUCT: NATIONAL VACUUM PUMP OIL NFPA CODES: H F R PRODUCT CODE: 0 1 0 CHEMICAL NAME/FAMILY: PETROLEUM LUBRICATING OIL DISTRIBUTOR: NATIONAL REFRIGERANTS, INC. ADDRESS: 11401 Roosevelt Boulevard Phila.,
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Hydraulic oil Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285 Emergency Telephone
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Refrigerator oil. Product Code : 001D8396 Manufacturer/Supplier : Shell South Africa Marketing (Pty) Ltd The
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Gear lubricant for use in food manufacturing equipment. Also intended for use with equipment manufacturing food packaging. Manufacturer/Supplier
Health Hazards Inhalation: Under normal conditions of use, this is not expected to be a primary route of exposure.
1 Dilmar Oil Company PAO 100 Material Safety Data Section I Chemical Product and Company Information Product Name: Dilmar PAO 100 Preparation Date: 2/2011 Product Code: pao100 Revision Date: Product Use:
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Grease for use in food manufacturing equipment. Also intended for use with equipment manufacturing food packaging. Manufacturer/Supplier :
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Hydraulic fluid for use in food manufacturing equipment. Also intended for use with equipment manufacturing food packaging. Manufacturer/Supplier
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Fire-resistant hydraulic fluid. Product Code : 001B3348 Manufacturer/Supplier : Shell India Markets Private
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Hydraulic oil Product Code : 001D7750 Manufacturer/Supplier : PT Shell Indonesia Talavera Office Park 22nd-27th
Health Hazards: High pressure injection under the skin may cause serious damage including local necrosis.
1 Dilmar Oil Company Premium AW Hydraulic Oils (All Grades) Material Safety Data Section I Chemical Product and Company Information Product Name: Dilmar Premium Hydraulic Oils Preparation Date: 3/2011
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Product Code : 001D8547 Uses : Automotive and industrial grease. Manufacturer/Supplier : Shell Oil Products US P.O. Box 4427 Houston TX 77210-4427
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Product Code : 001D8425 Uses : Automotive and industrial grease. Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX 77210-4427 USA SDS
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Automotive and industrial grease. Product Code : 001D3754 Manufacturer/Supplier : Société des Pétroles Shell
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Product Code : 001D7746 Uses : Hydraulic oil. Manufacturer/Supplier : Shell Oil Products US P.O. Box 4427 Houston TX 77210-4427 USA SDS Request :
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Product Code : 001D7759 Uses : Hydraulic oil. Manufacturer/Supplier : SOPUS Products P.O. Box 4427 Houston, TX 77210-4427 USA SDS Request : 877-276-7285
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING :
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Recommended Use / : Refrigerator oil. Restrictions of Use Product Code : 001D8396 Supplier : Shell Eastern Petroleum
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Metalworking oil. Manufacturer/Supplier : SOPUS Products PO Box 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285 Emergency Telephone
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING : (ALL HOURS)
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Recommended Use / : Automotive and industrial grease. Restrictions of Use Product Code : 001D8451 Manufacturer/Supplier
MATERIAL SAFETY DATA SHEET
Initial Preparation Date: 10/25/11 Last Revision Date: 2/11/13 Effective Date: 2/11/13 MATERIAL SAFETY DATA SHEET PRODUCT IDENTITY: PEAK MOLY EP2 GREASE 1. CHEMICAL PRODUCT & COMPANY INFORMATION OLD WORLD
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Automotive and industrial grease. Product Code : 001D8478 Manufacturer/Supplier : Shell Colombia S.A. Calle
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Product Code : 001D8487 Uses : Automotive and industrial grease. Manufacturer/Supplier : Shell Oil Products US P.O. Box 4427 Houston TX 77210-4427
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Synthetic grease for aircraft, containing molybdenum disulphide. For further details consult the AeroShell Book on www.shell.com/aviation.
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Product Code : 001A0059 Uses : Synthetic grease for aircraft. For further details consult the AeroShell Book on www.shell.com/aviation. Manufacturer/Supplier
1.2 Relevant identified uses of the substance or mixture and uses advised against. : Productivity Inc th Ave N Plymouth, MN 55447
SAFETY DATA SHEET according to 29 CFR 1910 (OSHA HCS) Preparation Date: 5/15/2015 Preparation # 15051148666 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product
Material Safety Data Sheet
Material Safety Data Sheet 1. MATERIAL IDENTIFICATION Material Name: Uses: Glass Cleaner Product Code: 5071268 Emergency Telephone Number Transport / Spill Information: (CHEMTREC) 1-800-424-9300, Local:
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Hydraulic fluid for use in food manufacturing equipment. Also intended for use with equipment manufacturing
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Automotive and industrial grease. Product Code : 001D8448 Manufacturer/Supplier : Shell Eastern Petroleum (Pte)
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Automotive and industrial grease. Product Code : 001D8464 Manufacturer/Supplier : Pilipinas Shell Petroleum
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Product Code : 001A9774 Uses : Fire-resistant hydraulic fluid. Manufacturer/Supplier : Shell Oil Products US P.O. Box 4427 Houston TX 77210-4427 USA
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Hydraulic oil. Product Code : 001D7739 Manufacturer/Supplier : Shell India Markets Private Limited 2nd Floor,
Material Safety Data Sheet
1. CHEMICAL PRODUCTION IDENTIFICATION AND MANUFACTURER OR SUPPLIER DETAILS Material Name : Uses : Hydraulic oil. Product Code : 001D7759 Manufacturer/Supplier : LLC Shell Neft Russian Federation, 125445,
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Uses : Automotive and industrial grease. Product Code : 001D8451 Manufacturer/Supplier : Shell & Turcas Petrol A.Ş.
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Recommended Use / : Automotive and industrial grease. Restrictions of Use Product Code : 001D8467 Supplier : Shell
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Fuel injector cleaner Carburetor Cleaner Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285
19146 Telephone Hours of operation: Monday Friday, 9:00 am 6:00 pm
P a g e 1 3401 Grays Ferry Avenue, Building 176, Philadelphia PA 19146 Website: www.allevi3d.com Email: info@allevi3d.com Safety Data Sheet 1. Identification Product Name Sodium Alginate Substance/Mixture
Material Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND COMPANY/UNDERTAKING Material Name : Recommended Uses : Automotive and industrial grease. Product Code : 001D8467 Manufacturer/Supplier : Viva Energy Australia
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1. IDENTIFICATION Product Identifier Product Name Gasoila Light Cutting Oil. Other means of Identification Product Code Recommended Use Recommended Restrictions WL32, WL28. Lubricant.
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 05/10/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Poly(vinyl buytral) Molecular Formula:
: Wizards Tire & Vinyl Shine
Revision date: 06/01/2015 Supersedes: 09/1/2012 Version: 2.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product form : Wizards
3.2. Mixture Name Product identifier % GHS-US classification
SECTION 1: Identification 1.1. Identification Product form Product name No Smoke Date of issue: 11/19/2015 Revision date: 10/06/2016 Supersedes: 08/22/2016 Version: 1.3 : Mixture : No Smoke Product code
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
Revision date: 01/11/2015 SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance Formula : CaCO 3 Molecular weight : : 100.09 g/mol CAS No. :
Gulf Compressor Synthetic DE Lubricant
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identifier: Gulf Compressor Synthetic DE 32 Gulf Compressor Synthetic DE 68 Gulf Compressor Synthetic DE 100 Gulf Compressor Synthetic DE 150 Other
SC Johnson Professional Windex Glass Cleaner with Ammonia-D
1. PRODUCT AND COMPANY IDENTIFICATION Product information Product name : SC Johnson Professional Windex Glass Cleaner with Ammonia-D Recommended use : Hard Surface Cleaner Manufacturer, importer, supplier
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Carb and choke cleaner Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285 Emergency
SC Johnson Professional Defoamer
1. PRODUCT AND COMPANY IDENTIFICATION Product information Product name : Recommended use : Carpet Care Manufacturer, importer, supplier : S.C. Johnson & Son, Inc. 1525 Howe Street Racine WI 53403-2236
SAFETY DATA SHEET. CU-8120 Enzyme & bacteria digestive powder. None. (800) (800) Category 5 Category 3 Category 2B
SAFETY DATA SHEET 1. Identification Product Identifier Other means of identification Product code Recommended use Recommended restrictions Manufacturer information Company name Address Telephone Fax Emergency
SIGMA-ALDRICH. SAFETY DATA SHEET Version 5.2 Revision Date 02/26/2015 Print Date 04/02/2016
SIGMA-ALDRICH sigma-aldrich.com SAFETY DATA SHEET Version 5.2 Revision Date 02/26/2015 Print Date 04/02/2016 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Krytox LVP grease
Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.
Safety Data Sheet Issue Date: 13-Dec-212 Revision Date: 1-APR-215 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # United 432 PHASER GLASS BLAST UNITED-432
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).
1. PRODUCT AND COMPANY IDENTIFICATION Product name : IRDye 700 Phosphoramidite Part Number(s) : 830-05368, 4200-33, 4200-34 Brand : LI-COR Identified uses : Laboratory chemicals, Manufacture of substances
MATERIAL SAFETY DATA SHEET
1. Identification of the substance/ mixture and of the company/ undertaking Product identifier Product description: Synthetic oil (ester oil with additives) Order number: Number Package Size L21001 1 Liter
Safety Data Sheet. AB Page 1 of 6 January 01, Relevant routes of exposure: Eye contact, skin contact, inhalation, ingestion
AB 30.00 Page 1 of 6 Section 1: PRODUCT AND COMPANY IDENTIFICATION Omega Products International P.O. Box 77220 Corona, CA 92877-0107 Company Phone Number: 1-951-737-7447 Emergency Phone Number: 1-951-737-7447
SCJP Windex Cleaner Non-Ammoniated
1. PRODUCT AND COMPANY IDENTIFICATION Product information Product name : Recommended use : Hard Surface Cleaner Manufacturer, importer, supplier : S.C. Johnson & Son, Inc. 1525 Howe Street Racine WI 53403-2236
Advanced Organics Carbon Based Fertilizers Inc.
Advanced Organics Carbon Based Fertilizers Inc. DBA EarthWorks Natural Organic Products SAFETY DATA SHEET Revision Date 02.18.2016 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. Product and Company Identification Material name Revision date 02-15-2012 Version # 01 CAS # Mixture Synonym(s) MDDG, MDDGS Manufacturer/Supplier Valero Marketing & Supply
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 12/06/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Propylene glycol monostearate Molecular
Safety Data Sheet. (L-Aspartic Acid) L-Aspartic Acid DATE PREPARED: 3/6/2017. Section 1. Product and Company Identification
Section 1. Product and Company Identification L-Aspartic Acid Product Name CAS Number 56-84-8 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899
3.1. Substance Not applicable Mixture Name Product identifier % None by HazCom 2012 criteria
Date of issue: 09/09/2015 Revision date: 09/09/2015 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name Product code : :
Issue Date: 27-Dec-2011 Revision Date: 03-Feb-2015 Version 1 1. IDENTIFICATION. Malodor Eliminator, Water Based.
Safety Data Sheet Issue Date: 27-Dec-2011 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Buckeye Scavenger BE-5427 Product Code 5427 Recommended use of
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance : Tragacanth CAS No. : 9000-65-1 Product code Formula Synonyms Tragacanth Gum Revision
SIGMA-ALDRICH. SAFETY DATA SHEET Version 5.1 Revision Date 08/28/2014 Print Date 06/21/2016
SIGMA-ALDRICH sigma-aldrich.com SAFETY DATA SHEET Version 5.1 Revision Date 08/28/2014 Print Date 06/21/2016 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Glutathione Product
Target Molecule Material Safety Data Sheet Reversion Date 12/02/ PRODUCT AND COMPANY IDENTIFICATION
Target Molecule Material Safety Data Sheet Reversion Date 12/02/2016 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifier Product Name: SH-4-54 Catalog No.: T6669 CAS No.: 1456632-40-8 1.2 Relevant
Distributor : Continental Industries Group, Inc. 733 Third Avenue Fl. 20 Tel:
Safety Data Sheet www.continental-industries.com 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Sodium bicarbonate Version 1.0 Creation Date 01/15/2015 Distributor : Continental Industries Group,
SIGMA-ALDRICH. Material Safety Data Sheet Version 3.8 Revision Date 10/31/2011 Print Date 11/01/2011
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 3.8 Revision Date 10/31/2011 Print Date 11/01/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Albumin, from bovine serum Product
: Sarapin 50 ml multi-dose vial
Revision date: 6/1/2015 Supersedes: 01/27/2011 Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name Product form Other means
Safety Data Sheet. Issue Date: 05-Jan-2010 Revision Date: 24-Nov-2014 Version Number: Identification. 2. Hazards Identification
Safety Data Sheet Issue Date: 05-Jan-2010 Version Number: 1 Product Identifiers Product Name: Yellow/Green Tracing Dye Liquid Product Number: 106501 Recommended Use & Restrictions on Use Water tracing
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 4.3 Revision Date 12/12/2012 Print Date 03/13/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Molecular sieves Product Number
SAFETY DATA SHEET (800) (800) Category 2 Category 2A
SAFETY DATA SHEET 1. Identification Product Identifier Other means of identification Product code Recommended use Recommended restrictions Manufacturer information Company name Address Telephone Fax Emergency
Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : M27757 1.2. Relevant identified uses of the substance or mixture and uses advised against 1.3. Details
The Valvoline Company Date Prepared: 01/14/02. MSDS No: I
The Valvoline Company Date Prepared: 01/14/02 HP GEAR OIL 80W-90 1/16 GA MSDS No: 505.0091437-009.011I 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Material Identity Product Name: HP GEAR OIL 80W-90
SAFETY DATA SHEET OSHA HCS (29 CFR ) 35 Old Dock Road. Yaphank, NY 11980
SAFETY DATA SHEET OSHA HCS (29 CFR 1910.1200) SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Product identifier Chemical Name CAS No. Trade Name Product Codes T-FGG-HD Mixture Food Grade Grease Relevant
: White Rouge Buffing Compound
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : White Rouge Buffing Compound 1.2. Relevant identified uses of the substance or mixture
Material Safety Data Sheet
1. MATERIAL AND COMPANY IDENTIFICATION Material Name : Uses : Antifreeze and coolant. Manufacturer/Supplier : SOPUS Products PO BOX 4427 Houston, TX 77210-4427 USA MSDS Request : 877-276-7285 Emergency
Crystal Grease SAFETY DATA SHEET
SAFETY DATA SHEET OSHA HCS (29 CFR 1910.1200) SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Product identifier Chemical Name CAS No. Trade Name Product code Mixture Mixture Crystal Grease Relevant identified
Material Safety Data Sheet
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name Product Use Description Lubricant Company Manufacturer Anderol Specialty Lubricants, a division of Chemtura Corporation 215 Merry Lane East Hanover,
Safety Data Sheet Revision Date: 10/25/2017
Safety Data Sheet Revision Date: 10/25/2017 Section 1: Chemical Identification 1.1 Chemical Identification Product Name: Alternative Name: Catalog Number: O-200 1.2 Relevant Uses and Uses Advised Against
Extreme Fluoro Grease SAFETY DATA SHEET
SAFETY DATA SHEET OSHA HCS (29 CFR 1910.1200) SECTION 1: PRODUCT AND COMPANY IDENTIFICATION Product identifier Chemical Name CAS No. Trade Name Product Code Not applicable. Mixture Extreme Fluoro Grease
Advanced Organics Carbon Based Fertilizers Inc.
Advanced Organics Carbon Based Fertilizers Inc. DBA EarthWorks Natural Organic Products SAFETY DATA SHEET Revision Date 02.19.2016 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product
: Abrasive Flap Disc - Aluminum Backed
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Abrasive Flap Disc - Aluminum Backed 1.2. Relevant identified uses of the substance
Issue Date: 11-Jan-2013 Revision Date: 01-Nov-2017 Version Number: Identification
Safety Data Sheet Issue Date: 11-Jan-2013 Version Number: 1.2 Product Identifiers Product Name: Tropical Shade Liquids 1. Identification Product Number: 206002 (Blue), 206005 (Blue/Black), 206006 (Black),
DuPont Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1. IDENTIFICATION Product Identifier Product Name Copper Thred Gard. Other means of Identification Product Code Recommended Use Recommended Restrictions CG04, CG08, CG16. Anti
Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.
Safety Data Sheet Issue Date: 16-Feb-2012 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # United 894 ZYME-OUT UNITED-894 Recommended use of the chemical
SAFETY DATA SHEET. SECTION 1: Identification. SECTION 2: Hazardou(s) Identification
Page 1 of 5 SECTION 1: Identification Product Name: HiTak Tape Manufacturer: (Av-DEC) 3215 West Loop 820 South Ft. Worth, TX 76116 Emergency Contact: 817-738-9161, available hours 8 a.m. to 5 p.m. CT.
KEYSTONE WATER BASED STAINLESS STEEL POLISH. Use only for the purpose on the product label.
SAFETY DATA SHEET KEYSTONE WATER BASED STAINLESS STEEL POLISH Section 1. Chemical product and company identification Product name Recommended use and restrictions KEYSTONE WATER BASED STAINLESS STEEL POLISH
1.2 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Swingline shredder lubrication
www.accobrands.com Safety Data Sheet Version 1.0 Revision Date 10/27/2014 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Swingline Shredder Oil 1.2 Relevant identified uses
Safety Data Sheet. Section 2 Hazards Identification. Section 3 Composition/Information on Ingredients
Safety Data Sheet Freeman White Wood Glue Fast Set Date of Preparation: September 15, 2015 Section 1 Chemical Product and Company Identification 1.1 Product identifiers Product name: Freeman White Wood
Issue Date: 09-Jan-2013 Revision Date: 06-Feb-2017 Version Number: Identification. 2. Hazards Identification
Safety Data Sheet Issue Date: 09-Jan-2013 Version Number: 1.1 Product Identifiers Product Name: Bright Dyes FLT Orange Powder Product Number: 105006 Recommended Use & Restrictions on Use Water tracing
Safety Data Sheet. (Theobromine) Theobromine DATE PREPARED: 11/18/2015. Section 1. Product and Company Identification. Product Name CAS Number
Section 1. Product and Company Identification Theobromine Product Name CAS Number 83-67-0 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899 parchem.com
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Page: 1 of 5 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Identity (As Used on Label and List): SKF Grease LGMT 2 Product Code: LGMT 2 Product Use: Bearing lubricant Trade