COSAO26 Identify workplace health and safety hazards and control risks in asbestos surveying and analysis
|
|
- Maximilian Burns
- 5 years ago
- Views:
Transcription
1 Identify workplace health and safety hazards and control risks in Overview This unit is about identifying hazards and assessing risks. You will also need to verify and implement methods and procedures to reduce risks. 1
2 Performance criteria Identify hazards and assess risks You must be able to: P1 P2 P3 P4 P5 P6 P7 undertake organisational risk management processes assess information relating to potential hazards identify the hazards arising from construction products and processes that need to be assessed obtain accurate information on any factors relating to the hazards identify the significance of the hazards assess the significant hazards to identify the residual risks and apply the principles of prevention and protection check that resulting information on significant residual risks is provided to the appropriate people Verify and implement methods and procedures to reduce risks You must be able to: P8 P9 P10 P11 P12 P13 P14 P15 verify accurate details of the risks verify the most effective methods and procedures to reduce risks verify the resources that are necessary to implement the risk reduction methods and procedures identify the activities required to implement the risk reduction methods and procedures verify that the risk reduction methods and procedures comply with all relevant legislation, regulations and guidelines implement and maintain risk reduction methods and procedures utilise opportunities to promote the implementation of the risk reduction methods and procedures record the risk reduction methods and procedures in the appropriate information systems 2
3 Knowledge and understanding Identify hazards and assess risks You need to know and understand: K1 K2 K3 K4 K5 K6 K7 K8 how and why to undertake design risk management processes (evaluation) how and why to assess information relating to potential hazards (analysis) what to identify as the hazards arising from construction products and processes that need to be assessed (understanding) how to obtain accurate information on any factors relating to the hazards (application) how and why to identify the significance of the hazards (synthesis) how and why to assess the significant hazards to identify the residual risks (analysis) how to apply the principles of prevention and protection (application) how to check that information on significant residual risks is provided to the appropriate people (application) Verify and implement methods and procedures to reduce risks You need to know and understand: K9 K10 K11 K12 K13 K14 K15 K16 how and why to verify accurate details of the risks (analysis) how and why to verify the most effective methods and procedures to reduce risks (analysis) how and why to verify the resources that are necessary to implement the risk reduction methods and procedures (analysis) how to identify the activities required to implement the risk reduction methods and procedures (analysis) how and why to verify that the risk reduction methods and procedures comply with all relevant regulations and guidelines (analysis) how to implement and maintain risk reduction methods and procedures (application) how to utilise opportunities to promote the implementation of the risk reduction methods and procedures (application) how to record the risk reduction methods and procedures (application) 3
4 Additional Information Scope/range Identify hazards and assess risks 1. Risk Management: 1.1. hazard identification 1.2. risk assessment 1.3. prevention and protection 2. Hazards: 2.1. working at height 2.2. slips, trips and falls (same level) 2.3. hit by falling or moving objects 2.4. manual handling 2.5. noise and vibrations 2.6. power sources 2.7. hazardous substances or items 2.8. trapped by something collapsing or overturning 2.9. confined spaces fire lack of/breaches of security water transport operating equipment asbestos display screen equipment materials & their failure points environmental limitations physical limitations lone working others 3. Factors: 3.1. injure people 3.2. cause ill health 3.3. damage property 3.4. adversely affect the man-made and built environment 3.5. cost 4
5 4. Assess: 4.1. likelihood of occurrence; 4.2. severity of harm or damage which may be incurred 5. Risks: 5.1. high 5.2. medium 5.3. low 6. Principles of prevention and protection: 6.1. eliminate 6.2. control at source 6.3. manage 6.4. personal protection equipment 6.5. communal/collective protection 6.6. audit and review Verify and implement methods and procedures to reduce risks 7. Risks: 7.1. high 7.2. medium 7.3. low 8. Methods: 8.1. eliminate 8.2. control at source 8.3. mange 8.4. personal protection equipment 8.5. communal/collective protection 9. Procedures: 9.1. statutory requirements 9.2. approved codes of practice 9.3. organisational quality manual 9.4. project requirements 9.5. guidance documents 10. Information systems: risk assessment method statement 5
6 Developed by ConstructionSkills Version number 1 Date approved December 2012 Indicative review date Validity Status Originating organisation Original URN Relevant occupations Suite Key words December 2018 Current Original ConstructionSkills Building and civil engineering technicians; Building inspectors; Chartered surveyors (not quantity surveyors); Laboratory technician; Occupational Hygienists and Safety Officers (Health and Safety) Asbestos Surveying and Analysis risk; health and safety; asbestos; surveying; analysis 6
SEMBIT SQA Unit Code F9JC 04 Complying with statutory regulations and organisational safety requirements
Complying with statutory regulations and organisational safety Overview This unit covers the competences needed to deal with statutory regulations and organisational safety. It does not deal with specific
More informationSEMMPF201 Complying with Statutory Regulations and Organisational Safety Requirements
Complying with Statutory Regulations and Organisational Safety Overview This unit identifies the competences you need to deal with statutory regulations and organisational safety requirements, in accordance
More informationThis standard comprises the following:
Overview in accordance with approved procedures and practices. This standard comprises the following: 1 Complete and check the initiation circuit 2 Clear and secure the danger zone 3 Sound warning and
More informationSKSTEX36(SQA Unit Code-H7C9 04) Calibrate textile production equipment
Overview This standard is for those who carry out routine calibrations at prescribed intervals in order to keep equipment in calibration. The job role will involve: 1. Performing calibration 2. Identifying
More informationLANNAC3 - SQA Unit Code F8J4 04 Maintain the cleanliness of the working environment
Overview This standard is designed to be applicable to those who undertake routine cleaning of the workplace and the materials and equipment that are used in the course of normal work. The elements are:
More informationHazard & Risk Management
Hazard & Risk Management Introduction The Church recognises WHS hazards and risks must be appropriate managed to ensure, so far as reasonably practicable, the health and safety of all workers at Church
More informationSFJFRSFF5 SQA Unit Code (H9FD 04) Protect life and the environment from the effects of hazardous materials
Overview This standard is recommended for firefighters. This standard is about working as a team member to limit damage to the environment from (i.e. any materials that potentially present a hazard to
More informationSEMMME3-073 Checking that completed assemblies comply with specification
Checking that completed assemblies comply with specification Overview This unit identifies the competences you need to carry out checks on mechanical assemblies, in accordance with approved procedures.
More informationEUSMUNC06 (SQA Unit Code - FG2W 04) Locate and avoid supply apparatus for Utilities Network Construction
Locate and avoid supply apparatus for Utilities Network Construction Overview This national occupational standard defines the competence involved in locating and avoiding supply apparatus by using appropriate
More informationASTC210 (SQA Unit Code - F4PS 04) Clean confined spaces
Overview This unit is about maintaining levels of cleanliness in confined spaces. When working in confined spaces it is important to be vigilant against possible hazards and risks that may arise during
More informationCOGPOLY39 Meet safety, health and environmental requirements in the workplace
Meet safety, health and environmental requirements in the workplace Overview This unit is for those with responsibilities for meeting safety, health and environment requirements in the workplace. It is
More informationLANTw17 - SQA Unit Code H2RX 04 Prepare for, and agree, emergency treework operations
Prepare for, and agree, emergency treework operations Overview This standard is about preparing and agreeing to undertake emergency treework operations. The standard includes the safe preparation and undertaking
More informationUnderstanding Statutory Regulations and Organisational Safety Requirements within a Medical Engineering Environment
This unit has 5 learning outcomes Learning Outcomes Assessment Criteria The learner will: 1. Know how to comply with statutory regulations and organisational safety requirements relating to Health and
More informationSFJFF3 - SQA Unit Code D7WM 04 Save and preserve endangered life
Overview This unit is about you working as a team member to search for life and rescue people during fires and other incidents. The unit may cover working as an individual but will usually involve being
More informationSEMEEE36 Checking the compliance of electrical equipment against the specification
Checking the compliance of electrical equipment against the Overview This unit identifies the competences you need to carry out compliance checks on electrical equipment, in accordance with approved procedures.
More informationNZQA unit standard version 3 Page 1 of 8. Manage the mine ventilation system at an extractive site
Page 1 of 8 Title Manage the mine ventilation system at an extractive site Level 7 Credits 30 Purpose This unit standard covers the development and management of the operation and maintenance of a mine
More informationHEALTH AND SAFETY RISK ASSESSMENT POLICY Harmer Street Gravesend Kent DA12 2AX
HEALTH AND SAFETY RISK ASSESSMENT POLICY 42 44 Harmer Street Gravesend Kent DA12 2AX CONTENTS 1. General Policy on Health and Safety Risk Assessment... 1 2. Scope... 1 3. Authorisation... 1 4. Responsibility...
More informationCompensation claims: Why do companies lose claims? Nicola Lashmar Principal Associate Barrister Eversheds LLP 4 July 2012
Compensation claims: Why do companies lose claims? Nicola Lashmar Principal Associate Barrister Eversheds LLP 4 July 2012 What we will cover: The law The duties owed by an employer absolute as far as is
More informationSUPPLIER HEALTH AND SAFETY. Supporting a healthy and safe working environment for our people and customers
SUPPLIER HEALTH AND SAFETY Supporting a healthy and safe working environment for our people and customers Document Template Control Prepared by Georgina East May 2017 Date Approved by May 2017 Mark Beder
More informationAttachment 2 Risk Assessment Guidelines
Attachment 2 Risk Assessment Guidelines Contents Page 3: Page 6: Page 7: Page 8: Guidance on writing a risk assessment Blank risk assessment Possible hazards Risk assessment instruction recording form
More informationEUSCS04 Overseeing work in confined spaces
Overview This unit is about the duties of a safety attendant (top-man/woman) which does not require entries into confined spaces. It is about controlling the pre-entry procedures and entry into and out
More informationASTICT1 - SQA Unit Code H54P 04 Prepare to carry out cleaning operations on information communication technology (ICT) equipment
Prepare to carry out cleaning operations on information communication technology (ICT) equipment Overview This standard is about making preparations to clean ICT equipment. It includes confirming instructions
More informationProcedure: Work health and safety hazard management
Procedure: Work health and safety hazard management Purpose This procedure describes how the Australian National University (ANU) manages Work Health Safety hazards for the health, safety, rehabilitation
More informationOverview EUSSAM12. Carry out tightness testing and direct purging of gas installations
Overview This standard covers tightness testing and direct purging of low or medium pressure gas, in accordance with approved procedures and practices. It covers the standards required to meet the requirements
More informationSEMETS3-17 Checking and calibrating mechanical inspection equipment
Checking and calibrating mechanical inspection equipment Overview This unit identifies the competences you need to carry out calibration and setting activities on mechanical inspection equipment, in accordance
More informationRISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992
RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992 PERSONNEL DIVISION REVIEWED AUTUMN 1999 CONTENTS Page 1 INTRODUCTION 1
More informationin Australian Workplaces
Copyright 2011 - OnGuard Safety Training Pty Ltd 1 of 7 in Australian Workplaces Introduction Part 2 Part 3 Part 4 Part 5 SafeWork SA Introduction Hazard identification is the process used to identify
More informationSEMEMI SQA Unit Code H2AX 04 Carrying out scheduled maintenance tasks on fluid power equipment
Carrying out scheduled maintenance tasks on fluid power equipment Overview This unit identifies the competences you need to carry out scheduled maintenance tasks on fluid power equipment on mobile or static
More informationNZQA unit standard version 5 Page 1 of 5. Describe, develop, and maintain basic ventilation systems for an underground coal mine
Page 1 of 5 Title Describe, develop, and maintain basic ventilation systems for an underground coal mine Level 4 Credits 15 Purpose People credited with this unit standard are able to: describe the basic
More informationSEMFEW339 - SQA Unit Code H1WC 04 Slinging, lifting and moving materials and components
Slinging, lifting and moving materials and components Overview This unit identifies the competencies you need to move loads by slinging and lifting in accordance with approved procedures. You will be required
More informationHazard Management Making your workplace safer
Hazard Management Making your workplace safer A Guide to Hazard Identification, Risk Assessment, Control and Reviewing 1 What is a hazard? A hazard is something which has the potential to harm the health,
More informationOverview EUSDSG3.12. Install gas meters and regulators (2.5 to 16.0m3/hr)
Overview This national occupational standard is for gas engineerswho are required to install and exchange meters and regulators (2.5 to 16.0m3/hr) on low pressure and medium pressure gas systems. This
More informationMarine Education Society of Australasia HAZARD MANAGEMENT POLICY
Marine Education Society of Australasia HAZARD MANAGEMENT POLICY Purpose of guidelines Commitment to workplace health and safety Scope Legal Framework MESA is committed to ensuring safe and healthy working
More informationMobile Training Unit (MTU)
Mobile Training Unit (MTU) The MTU provides a convenient way of meeting training requirements by bringing a range of short duration health & safety and operative training onsite. Through the MTU, employees
More informationInstalling, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace L/505/0144
Unit Title Ofqual unit reference number (code) Organisation Reference QCF 665 Unit Level Unit Sub Level Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering
More informationNZQA unit standard New US 1Non-coal of 7145 version 1 Page 1 of 5
Page 1 of 5 Title Design and maintain effective ventilation systems for a non-coal underground operation Level 5 Credits 20 Purpose People credited with this unit standard are able to: explain the principles
More informationLANCU60Ga - SQA Unit Code D9HX 04 Contribute to the management of a fishery
Overview This standard deals with the competence required by individuals who are involved in managing a fishery. It is aimed at those who work in fisheries management on either a full- or part-time basis,
More informationLevel 3 Diploma in Moving Loads in Construction. Qualification Specification
Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 4 Support for candidates 5 Assessment 5 Internal quality assurance
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationSEMAER2_41 Dismantling and removing aircraft access structures
Overview This unit identifies the competences you need to dismantle and remove aircraft access structures, in accordance with approved procedures. You will be required to dismantle and remove the access
More informationGENERAL WORK HEALTH & SAFETY CHECKLIST INTENDED USE. St Euphemia College - General Work Health and Safety Checklist
GENERAL WORK HEALTH & SAFETY CHECKLIST INTENDED USE This document is a summary checklist intended for employees as well as the School executive, and sets out the measures that a PCBU should put in place
More informationASTFFL9 - SQA Unit Code H54L 04 Assess and estimate work required to limit damage to contents after flood
Assess and estimate work required to limit damage to contents after Overview 1 Confirm extent and nature of damage caused to contents by 2 3 ASTFFL9 1 Performance criteria Confirm extent and nature of
More informationTEARFUND RISK ASSESSMENT
TEARFUND RISK ASSESSMENT Note: Read the guidance notes before you proceed with this risk assessment and do get in touch with your local Tearfund staff member for assistance. Name of volunteer Contact details
More informationCOMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3)
COMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3) The following guidance notes accompany the College Procedure Assessment form (COSHH-related). Please complete all applicable
More informationSEMLATA3-12 Measuring, weighing and preparing compounds and solutions for laboratory use
Measuring, weighing and preparing compounds and solutions for Overview This unit covers the competences you need to measure, weigh and prepare compounds and solutions for laboratory investigations. Prior
More informationOverview IMIARBBP21. Carry Out Motor Vehicle Body Metal Inert Gas (MIG) Brazing Operations
Overview This standard is about joining materials correctly and effectively using Metal Inert Gas (MIG) Brazing techniques and procedures. 1 Performance criteria You must be able to: 1. use the appropriate
More informationIGO GROUP SAFETY STANDARD 30 - WORKPLACE VENTILATION INDEPENDENCE GROUP NL
IGO GROUP SAFETY STANDARD 30 - WORKPLACE VENTILATION INDEPENDENCE GROUP NL CONTENTS 1. INTENT... 3 2. APPLICATION... 3 3. UNDERGROUND VENTILATION... 3 3.2 Underground Ventilation Officer... 3 3.3 Risk
More informationHazard and Risk Assessment Guide
Page 1 Safety legislation in Canada (Occupational Health & Safety Act, Sec. 25) entails employers to do everything that is reasonable to ensure their workers have a healthy and safe workplace. The first
More informationCompliance with Health & Safety legislation
Compliance with Health & Safety legislation The following is a brief description of some of the main duties required by the more generic safety legislation applicable to businesses, which the employers
More informationRelease: 1. UEPOPL002A Licence to operate a reciprocating steam engine
Release: 1 UEPOPL002A Licence to operate a reciprocating steam engine UEPOPL002A Licence to operate a reciprocating steam engine Modification History Not applicable. Unit Descriptor Unit Descriptor 1)
More informationNewtown Neighbourhood Centre
Policy Name Policy Number 1.10.1.1 Relevant procedures Work Health and Safety All procedures relating to the health, safety and well being of individuals in the workplace are relevant to this policy. Author
More informationSafety Guidelines for Live Entertainment and Events I Part 2. Hazard Identification and Risk Management 1
Safety Guidelines for Live Entertainment and Events Part 2. Hazard Identification and Risk Management Contents Disclaimer... 1 1. Principles of Risk Management... 2 2. The Risk Management Process... 2
More informationHazard Identification
Topic 4 Hazard Identification LEARNING OUTCOMES By the end of this topic, you should be able to: 1. Define hazard; 2. Describe the eight categories of workplace accidents; 3. Briefly explain the Hazard
More informationNZQA unit standard 7145 version 9 Page 1 of 5. Design and maintain effective ventilation systems for an underground coal mine
Page 1 of 5 Title Design and maintain effective ventilation systems for an underground coal mine Level 5 Credits 20 Purpose People credited with this unit standard are able to, for an underground coal
More informationLANCU50 - SQA Unit Code F0N3 04 Prepare deer for human consumption
Overview This standard describes your role in preparing dead deer for human consumption. It relates to the work activities that you undertake to prepare deer carcasses so they can legally enter the food
More informationSafe work method statements
Information about Safe work method statements How to prepare and use a safe work method statement (SWMS) for high risk construction work (HRCW) and who needs to prepare one. October 2018 Key concepts Hazard
More informationLANH29 SQA Unit Code H52B 04 Implement plans for the management of sports turf areas
Overview This standard covers the implementation plans for the management of sports turf, which includes maintenance, renovation and repair. This standard is for anyone with the responsibility for implementing
More informationPROMP261 (SQA Unit Code H9J8 04) Use reel handling equipment
Overview This standard is for people who use reel handling equipment on web printing machines. Reel handling equipment on a large web-offset press is often complex machinery designed to allow continuous
More informationGuidance: HSW Risk Assessment Methodology HSW-PR09-WI01. Objective. Implementation
1.0 Objective This Work Instruction is designed to assist in the assessment of health and safety and wellbeing (HSW) risk and suggested controls associated with hazards identified while working throughout
More informationSFHCHS78 Administer oxygen safely and effectively
Overview This standard is about the safe and effective administration of oxygen in all healthcare settings, at home and in any environment where an individual requires oxygen therapy. Users of this standard
More informationWorking safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
More informationOverview. SEMEMI211 SQA Unit Code HF4E 04 Carrying out modifications or rewiring electrical circuits
Overview This standard identifies the competences you need to modify or rewire electrical circuits and equipment, in accordance with approved procedures. This will involve modifying or rewiring electrical
More informationManagement of risk. Definition of terms. Managing risks. Risk
Definition of terms Risk Management of risk Risk is the possibility that harm (death, injury or illness) might occur when exposed to a hazard. A hazard is anything with the potential to cause injury or
More informationChief Operating Officer Approved by. Responsible Officer. Vice-Chancellor Approved and commenced 25 September, 2017 Review by September, 2020
Work Health and Safety Policy Responsible Officer Chief Operating Officer Approved by Vice-Chancellor Approved and commenced 25 September, 2017 Review by September, 2020 Relevant Legislation, University
More informationOverview. OPIPOH7 - SQA Unit Code HG1X 04. Operate an Oil and Gas Process (Gas Compression)
OPIPOH7 - SQA Unit Code HG1X 04 Overview This process involves the operation of the compression of gas to a higher pressure for the purpose of gas lift, export, fuel gas, reinjection or fractionation.
More informationSEMEMI SQA Unit Code H2AP 04 Carrying out fault location on electrical equipment and circuits
Carrying out fault location on electrical equipment and circuits Overview This unit identifies the competences you need to locate faults on electrical equipment and circuits, in accordance with approved
More informationLONE WORKING HEALTH AND SAFETY GUIDANCE
LONE WORKING HEALTH AND SAFETY GUIDANCE Revised March 2017: Version 3.1 Name of Policy: Purpose of the Policy: Policy Applies to: Approved by: Responsible for its Updating: Final Approval by: Lone Working
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationCourse outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
More informationHealth & Safety Policy HSP 08 Control of Substances Hazardous to Health (COSHH) Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 08 Control of Substances Hazardous to Health (COSHH) Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review
More informationASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after flood
ASTFFL8 SQA - Unit Code H54K 04 Assess and estimate work required to limit damage to structures after Overview 1 Confirm extent and nature of damage caused to structures by 2 3 ASTFFL8 1 Performance criteria
More informationSEMPEO SQA Unit Code H2CB 04 Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation Overview This NOS identifies the competencies you need to carry out preparation and manoeuvring activities
More informationOverview EUSDSG3.6. Gas tightness testing and direct purging
Overview This national occupational standard is for gas engineers who will be carrying out tightness testing and direct purging of small(domestic) natural gas installations. This standard also covers the
More informationURBAN SEARCH AND RESCUE - OPERATIONS Undertake structural collapse rescue as part of an urban search and rescue (USAR) operation
1 of 6 level: 5 credit: 12 planned review date: December 2004 sub-field: purpose: Specialist Rescue People credited with this unit standard are able to: prepare for a structural collapse operation as part
More informationCONTRACTOR SAFETY INDUCTION HANDBOOK
CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number
More informationOverview. LANGa40. Stalk and cull deer
Overview This standard describes your role in stalking and culling deer. It relates to the work activities that you undertake to control deer populations using a firearm. This standard is designed to support
More informationGSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS)
GSA POLICY ON LOCAL EXHAUST AND OTHER VENTILATION (FUME CUPBOARDS) Local Exhaust Ventilation Inspection & Maintenance 1 LOCAL EXHAUST AND OTHER VENTILATION Contents 1. Introduction 2. Design specifications
More information4 Staff Selection, Appraisal and Development. To prevent harm by identifying and controlling potential hazards.
OTAGO POLYTECHNIC MANAGEMENT POLICY Number: MP0403.04 Title: Hazard Management ITPNZ Standard: 4 Staff Selection, Appraisal and Development Chief Executive Approval: Approval Date: 17 Apr 12 Effective
More informationIRATA International. Jonathan Capper Executive Chairman
IRATA International Jonathan Capper Executive Chairman IRATA International Training, Certification & Regulation Who are IRATA? IRATA International Structure & Key Personnel IRATA International What do
More informationWork Health Safety Record Management Guidelines. October, 2014
Work Health Safety Record Management Guidelines October, 2014 Contents 1 Executive Summary... 2 2 More information... 2 3 University Records Management... 2 4 WHS Legislative Requirements... 2 5 Other
More informationHS329 Risk Management Procedure
HS329 Risk Management Procedure Work Health and Safety Act 2011 Policy hierarchy link Work Health and Safety Regulation 2011 Work Health and Safety Policy Code of Practice How to Manage Work Health and
More informationWork Equipment: LOCAL EXHAUST VENTILATION
Health & Safety Services Safety Code of Practice 46: Part 4 2 nd Edition, September 2014 Work Equipment: LOCAL EXHAUST VENTILATION University of Reading 2015 Page 1 Contents 1 Scope... 3 2 Introduction...
More informationAccident/Incident Reporting and Investigation Procedures
Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative
More informationSEMCW2-10 Testing quartz watches
Overview This unit identifies the competences you need to carry out tests on quartz watches and watch movements, in accordance with approved procedures. You will be required to carry out tests on a range
More informationRisk Assessment. 1.3 This procedure outlines the process of undertaking a Risk Assessment in the University.
1 PURPOSE Risk Assessment 1.1 The Management of Health and Safety at Work Regulations require an assessment of the work related risks to employees, students, visitors and members of the public arising
More informationSEMEM3-65 Servicing anaesthetic and ventilation equipment
Overview This unit identifies the competences you need to carry out servicing activities on anaesthetic and ventilation equipment, in accordance with approved procedures. You will be required to service
More informationWILTSHIRE POLICE FORCE PROCEDURE
Template v6 WILTSHIRE POLICE FORCE PROCEDURE Vibration at Work Date of Publication: January 2018 Version: 4.0 Next Review Date: January 2021 TABLE OF CONTENTS PROCEDURE OVERVIEW... 3 GLOSSARY OF TERMS...
More informationWH&S Act 2011 & Regulations 2011, Environmental Protection Act and Regulations
Workplace Address: Page 1 of PART 1: TASK DETAILS Client: JOB/TASK: Using Water blaster PART 2: RESOURCES Relevant Legislation/Codes Practice: Training Required: Equipment Used: Materials Used: Substances
More informationIsolation Lockout and Tagging
PURPOSE To define the minimum system requirements for isolation of plant and equipment from hazardous substances, mechanical, electrical or other energy sources to protect all workers from personal injury
More informationWHS record keeping requirements
WHS record keeping requirements The table below provides details of the record keeping requirements in the Model Work Health and Safety Regulation, covering the following areas: Air-borne contaminant levels
More informationHAZARD MANAGEMENT PROCEDURE
TABLE OF CONTENTS 1. OBJECTIVE... 2 2. SCOPE... 2 3. DEFINITIONS... 2 4. RESPONSIBILITIES... 2 5. HAZARD IDENTIFICATION... 3 5.1 HAZARD AND RISK IDENTIFICATION TOOLS AND METHODS... 3 5.1.1 Take 5 Risk
More informationRequired Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for Construction Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
More informationAPPROVED CODE OF PRACTICE FOR THE SAFE CONDUCT OF TRACK AND FIELD TRAINING
APPROVED CODE OF PRACTICE FOR THE SAFE CONDUCT OF TRACK AND FIELD TRAINING Revised August 2017 CONTENTS PAGE 2017 Updated Code of Practice 3 UKA Health & Safety Policy 4 Definitions 5 Hazard identification
More informationOverview. OPIPOH10 - SQA Unit Code HG Operate an Oil and Gas Process ( Gas Treatment)
OPIPOH10 - SQA Unit Code HG21 04 Overview This process involves the removal of impurities from the gas stream to reach the specified quality. The process boundary is from the inlet such as separator, compressor
More informationLevel 3 Award in Emergency Rescue and Recovery Of Casualties from Confined Spaces
Level 3 Award in Emergency Rescue and Recovery Of Casualties from Confined Spaces Qualification Specification ProQual 2018 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4
More informationRisk Management Guide
What is health and safety risk management? Risk Management Guide Risk Management is a proactive, logical and systematic approach of managing the uncertainty relating to potential risk, rather than responding
More informationCONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
More informationCONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE
CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE 1. INTRODUCTION The University uses substances hazardous to health in many of its operations, and accepts that it has a duty of care to reduce exposure
More informationHAZARDOUS SUBSTANCE AND DANGEROUS GOODS
The Barro Group is committed to continuously improving the management and standards of Occupational Health and Safety. This commitment extends to minimising exposure of employees, contractors, visitors
More informationHealth, Safety and Welfare Policy
Health, Safety and Welfare Policy This Policy is prepared in accordance with section 2(3) the Health and Safety at work etc. Act 1974, with the intention of promoting a safe working environment that will,
More information