MATERIAL SAFETY DATA SHEET A Colorant

Transcription

1 Page 1 of 6 Section 01 - Product Information Supplier: Dryvit Systems, Inc. World Headquarters 1 Energy Way West Warwick, RI USA Telephone: Contact: EH&S Manager ehs@dryvit.com CHEMTREC: Domestic rth America International Call (collect calls accepted) Product Name: Product Number: Primary Product Use: Chemical Family: DW1 Colorant Preparation Aqueous dispersion of C.I. Pigment White 6 containing polyglycol. Section 02 Hazards Identification Expected Route of Entry: Inhalation: Skin contact: Eye contact: Ingestion: Skin absorption: Yes Yes Health Effects of Exposure: C.I. Pigment White 006 ( ) Titanium Dioxide: May cause slight irritation to skin and irritation to the eyes. Inhalation of dust may cause mild upper respiratory irritation with cough and shortness of breath. Based on suppliers study where titanium dioxide was a potential carcinogen to rats via inhalation, it was concluded that titanium dioxide pigment will not cause lung cancer or chronic respiratory disease in humans at concentrations experienced in the workplace. Proprietary Ingredient The proprietary ingredient in this product may cause severe eye irritation with the risk of serious eye damage. Proprietary Ingredient The proprietary ingredient in this product may cause mild to severe eye irritation, mild to moderate skin irritation and mild respiratory irritation.

2 Page 2 of 6 Known Effects on Other Illnesses: ne Known. Listed Carcinogen: IARC: NTP: OSHA: Other: HMIS: Health: 1 Flammability: 1 Reactivity: 0 Personal protection: B Section 03 Composition / Information on Ingredients Hazardous Ingredients: Component CAS-. (Trade Secret.) Concentration C.I. Pigment White >60% Proprietary Ingredient 1 <3% Proprietary Ingredient 2 <5% Section 04 - First Aid Measures After Inhalation: Get victim to fresh air. Give artificial respiration or oxygen if breathing has stopped. Get prompt medical attention. Do not give fluids if victim is unconscious. After Contact with Skin: Wash thoroughly with soap and water for 15 minutes. If skin irritation occurs, seek medical attention. After Contact with Eyes: Flush immediately under running water for fifteen minutes. If redness or irritation occurs, seek medical attention. After Ingestion: If ingested, do not induce vomiting. Do not give anything to drink. Contact physician immediately. Advice to Doctor / Treatment: ne known. Section 05 - Fire Fighting Measures Flashpoint: Ignition Temperature: Hazardous Combustion Products: t Tested. t Tested. In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO)

3 Page 3 of 6 Extinguishing Media: Special Fire Fighting Procedure: Unusual Fire and Explosion Hazards: Carbon dioxide (CO2) Nitrogen oxides (NOx) Water Spray Jet Dry Powder Carbon Dioxide Alcohol-resistant Form Exercise caution when fighting any chemical fire. Use NIOSH approved self-contained breathing apparatus and full protective clothing. Emits toxic fumes under fire conditions. Section 06 - Accidental Release Measures Steps to be taken in case of spill or leak: Contain spill. All spills should be collected as liquid or absorbed on a suitable absorbent. Clean up should be accomplished by removal of contaminated soil or scrubbed with soap and water and cleaning wastes removed with absorbent materials. Wear proper protective equipment. Section 07 - Handling and Storage Advice on Safe Handling: Avoid contact with skin, eyes, and clothing. Keep container closed. Wash thoroughly after handling. Further Info on Storage Conditions: Store in a cool, dry, well-ventilated area. Keep container sealed when not in use. Section 08 - Exposure Controls / Personal Protection Occupational Exposure Limits: Component CAS Number: Regulatory List Type of Value Values / Remarks TITANIUM DIOXIDE US OSHA Table Z- 1 Limites for Air Contaminants [29 CFR ] TITANIUM DIOXIDE US ACGIH Threshold Limit Values 8-hours Time Weighted Averages Threshold Limit Value_Time Weighted Average 15 ppm; 15 mg/m3 10 mg/m3

4 Page 4 of 6 Respiratory Protection: Use NIOSH/MSHA approved respirators following manufacturer's recommendations where dust or fume may be generated. Nitrile Rubber Gloves Safety glasses or chemical splash goggles. Hand Protection: Eye Protection: Other Protective Equipment: Clothing suitable to prevent skin contact. Advice on System Design: Local ventilation recommended - mechanical ventilation may be used. Section 09 - Physical and Chemical Properties Form: Color: Odor: Liquid White t Specified Density: Boiling Point: Vapor Pressure: Partitioning coef. Octanol/water: Viscosity / (dynamic): t Tested. t Determined. t Tested. t Determined. t Tested. Section 10 - Stability and Reactivity Thermal Decomposition: Chemical Stability: Hazardous Polymerization: t Tested. Stable. Will not occur. Conditions to avoid: ne Known. Section 11 - Toxicological Information Product information: Acute inhalation toxicity: Acute dermal toxicity: Sensitization: Acute Oral Toxicity: Data. Data. Skin Irritation: Eye Irritation: t Tested. data. t Tested. t Tested.

5 Page 5 of 6 Section 12 - Ecological Information Product information: Fish Toxicity: Daphnia Toxicity: Algae Toxicity: Bacteria Toxicity: Data Available. Data Available. Data Available. t Tested. Section 13 - Disposal Considerations Waste Disposal Information: Small quantities may be treated in aerobic wastewater treatment systems. Larger quantities should be incinerated or may be land filled in approved systems. RCRA Hazardous Waste: -- t as sold. Section 14 - Transport Information DOT IATA IMDG t Restricted t Restricted t Restricted Section 15 - Regulatory Information TSCA Status: All components of this product are listed on the TSCA Inventory. SARA (section 311/312): Reactive hazard: Pressure hazard: Fire hazard: Immediate/acute: Yes Delayed/chronic: SARA 313 Information: This product does not contain any toxic chemical listed under Section 313 of the Emergency Planning and Community Right-To-Know Act of Clean Water Act: Contains no known priority pollutants at concentrations greater than 0.1%. FDA: This product is not registered with the FDA.

6 Page 6 of 6 Section 16 - Other Information Other Precautions: ne Known Label Information: CAUTION! MAY CAUSE SKIN, EYE OR RESPIRATORY TRACK IRRITATION Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Use ventilation and/or respiratory protection in order to keep exposure below TLV values. Keep container closed when not in use. In case of EYE CONTACT, flush with water for 15 minutes while holding eyelids open. If irritation develops, seek medical attention immediately. In case of SKIN CONTACT, immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. If IRRITATION develops get immediate medical help. If INHALED, remove individual to fresh air. If BREATHING is difficult, give oxygen and call a physician. INGESTION: do not induce vomiting. Seek medical assistance. Never give anything by mouth to an unconscious person. This information is supplied under the OSHA Hazard Communication Standard, 29 CFR , and is offered in good faith based on data available to us that we believe to be true and accurate. The recommended industrial hygiene and safe handling procedures are believed to be generally applicable to the material. However, each user should review these recommendations in the specific context of the intended use and determine whether they are appropriate for that use. warranty, express or implied, is made regarding the accuracy of this data, the hazards connected with the use of the material, or the results to be obtained from the use thereof. We assume no responsibility for damage or injury from the use of the product described herein. Data provided here are typical and not intended for use as product specifications. (R) and TM indicate trademarks of Dryvit Systems, Inc., its business partners or suppliers.