: Power-Kleen Defoamant S

Transcription

1 ADEFSXX-MAR733 Date of issue: 06/10/2015 Version: 1.0 SECTION 1: Identification 1.1. Identification Product form Product name Product code : Mixture : : ADEFSXX Relevant identified uses of the substance or mixture and uses advised against 1.3. Details of the supplier of the safety data sheet StingRay Tech Services 2450 Adie Rd. Maryland Heights, MO USA T Emergency telephone number Emergency number : INFOTRAC: SECTION 2: Hazard(s) identification 2.1. Classification of the substance or mixture GHS-US classification Not classified 2.2. Label elements GHS-US labeling No labeling applicable 2.3. Other hazards 2.4. Unknown acute toxicity (GHS US) Not applicable SECTION 3: Composition/Information on ingredients 3.1. Substance Not applicable 3.2. Mixture This mixture does not contain any substances to be mentioned according to the criteria of section 3.2 of HazCom 2012 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Allow victim to breathe fresh air. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects, both acute and delayed Symptoms/injuries : Not expected to present a significant hazard under anticipated conditions of normal use Indication of any immediate medical attention and special treatment needed 07/22/2016 EN (English US) SDS ID: ADEFSXX-MAR733 Page 1

2 SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Emergency procedures For emergency responders Protective equipment Emergency procedures : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling 7.2. Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Incompatible materials : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapor. : Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use. : Strong bases. Strong acids. SECTION 8: Exposure controls/personal protection 8.1. Control parameters : Sources of ignition. Direct sunlight Exposure controls Personal protective equipment : Avoid all unnecessary exposure. Hand protection Eye protection Respiratory protection : Wear protective gloves. : Chemical goggles or safety glasses. : Wear appropriate mask. : Do not eat, drink or smoke during use. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid 07/22/2016 EN (English US) SDS ID: ADEFSXX-MAR733 2/5

3 Color Odor Odor threshold : White ph : 3.5 Melting point Freezing point : characteristic Boiling point : > 35 C Flash point : > C Relative evaporation rate (butyl acetate=1) Flammability (solid, gas) Vapor pressure Relative vapor density at 20 C Relative density : 1 Solubility Log Pow Auto-ignition temperature Decomposition temperature Viscosity, kinematic Viscosity, dynamic Explosion limits Explosive properties Oxidizing properties 9.2. SECTION 10: Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Direct sunlight. Extremely high or low temperatures Incompatible materials Strong acids. Strong bases Hazardous decomposition products fume. Carbon monoxide. Carbon dioxide. SECTION 11: Toxicological information Information on toxicological effects : Non flammable. : 2400 cst Acute toxicity LD50 oral rat Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitization Germ cell mutagenicity Carcinogenicity > 5000 mg/kg Calculation method ph: 3.5 ph: /22/2016 EN (English US) SDS ID: ADEFSXX-MAR733 3/5

4 Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Potential Adverse human health effects and symptoms : Based on available data, the classification criteria are not met. SECTION 12: Ecological information Toxicity Persistence and degradability Persistence and degradability Bioaccumulative potential Bioaccumulative potential Mobility in soil Other adverse effects Effect on the global warming GWPmix comment : No known effects from this product. : No known effects from this product. : Avoid release to the environment. SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information Department of Transportation (DOT) In accordance with DOT : No supplementary information available. TDG Transport by sea Air transport SECTION 15: Regulatory information US Federal regulations 07/22/2016 EN (English US) SDS ID: ADEFSXX-MAR733 4/5

5 15.2. International regulations CANADA EU-Regulations National regulations US State regulations SECTION 16: NFPA health hazard NFPA fire hazard NFPA reactivity : None. : 0 - Exposure under fire conditions would offer no hazard beyond that of ordinary combustible materials. : 1 - Must be preheated before ignition can occur. : 0 - Normally stable, even under fire exposure conditions, and are not reactive with water. SDS US (GHS HazCom 2012) This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 07/22/2016 EN (English US) SDS ID: ADEFSXX-MAR733 5/5