JUNE 2018 VOL.06 MONTHLY HEALTH & SAFETY NEWSLETTER
|
|
- Gordon Moore
- 5 years ago
- Views:
Transcription
1 CONTACT ELECTRIC SAFETY NEWSLETTER FOR ENSURE ALL EMPLOYEES AND SUB-CONTRACTORS WORKING FOR AVALANCHE ACID REVIEW THIS NEWSLETTER. IT IS A KEY PART OF OUR SAFETY PROGRAM SAFETY TOPICS P.1 Defensive Driving P.2 Cannabis Impairment P.3 Cannabis Impairment P.4 Work Safe Bulletin P.5 Work Safe Bulletin P.6 Work Safe Bulletin P.7 H & S Alert P.8 H & S Alert P.9 Learning from Incident P.10 Step Energy Loading Procedures P.11 Step Energy Loading Procedures P.12 Step Energy Loading Procedures JUNE 2018 VOL.06 DEFENSIVE DRIVING WEAR YOUR SEAT BELT! Without a doubt, seat belts are the most significant safety device ever invented. Seat belts do several things for you. They provide impact protection, they absorb crash forces, and they keep you from being thrown out of the vehicle. Modern vehicles are built with "crumple zones," and seat belts are an integral part of the system. The belts hold you in place while the vehicle collapses around your "safe" zone. Belts help keep you in your place, in control, and better able to avoid a crash. Yet for all these benefits, folks have lots of "reasons" why they don't wear them. 1. "They wrinkle my clothes." Absolutely, they do. 2. "They're uncomfortable." Maybe so, but you can adjust them, so they fit better. If you need to have your belts adjusted to fit, see your dealer. 3. "I want to be thrown clear of the vehicle in a crash." Oh yes, PLEASE, on my head! By the way, that's the number one cause of death in vehicle crashes. 4. "I don't want to be trapped if there's a collision, or my vehicle ends up in the water, or on fire." Wearing belts increases the likelihood you will be conscious after impact, less injured, and more able to get out. Seat belt failure or jamming isn't common. 5. "The government can't tell ME what to do! It's a free country!" Yes, it is. But what about other people's rights? When you don't wear belts and get injured, what happens when your insurance runs out? The public pays your medical bills, that's what. This costs taxpayers around $35 million a year. SAFETY SUGGESTIONS/CONCERNS If there is a topic or item that you would like either reviewed in a monthly newsletter or discussed at the quarterly safety meetings; please fill out suggestions and concerns form and please drop a note in the Safety Basket and we will do our best to accommodate your safety requests. 6. "I've heard of people who were in crashes who would have been killed if they'd been wearing belts." Who says so? Not any safety expert with whom I've ever spoken. If a collision can kill you with a belt on, then you're out of luck without the belt also, unless by a fluke. What I want is good odds. The statistics show that seat belts would prevent roughly 50% of deaths and injuries. What about others who ride with you what if they won't wear belts? I would say no ride for them. In any collision, unbelted passengers become flying objects you can be injured if you are struck from behind by an unbelted passenger, even with your belt on. Proud Members Of
2 CANNABIS IMPAIRMENT 2
3 CANNABIS IMPAIRMENT Impairment in workplaces Workers who are impaired on the job whether by alcohol or drugs are a danger to their coworkers and themselves. Alberta already has rules and programs in place to address impairment on the job and keep workers safe, but before the legalization we will review occupational health and safety regulations and work with employers, labour groups and workers to ensure the rules continue to address impairment issues. This may include developing additional regulations, education or training programs. What are the facts about cannabis impairment? Driving while impaired by cannabis can result in injury or death. Cannabis can impair the skills needed to drive safely. The risk of having a car accident is even greater when alcohol is added to the mix. Using cannabis with other drugs such as certain pain medications or sleeping pills further lowers your ability to concentrate and react quickly to emergencies. Don t drive high. How long the impairing effects of cannabis last depends on how it was consumed (smoked, inhaled, ingested) and how much was taken, but effects can last at least six (6) hours or longer after use. 3
4 4
5 5
6 6
7 7
8 8
9 9
10 Tools/Equipment/Material Required: Tank truck STEP ENERGY (CLAIRMONT) LOADING PROCEDURES FOR TRI QUAD # Job Steps Hazards Associated Controls Persons Responsible 1. Pull up to security shack. Guard will ask for appropriate information. Proceed when access is granted. Turn left after guard shack go 2. to cement tanks. Turn right between, go to bay door. Stop outside of bay door and don appropriate safety gear. If you are waved into the 3. chemical loading bay, don PPE immediately after parking. Set parking brake. Once inside speak to Schlumberger operator Prior to loading set out chock blocks and ground cables. Set out drip trays under vent line and hose connections. Ensure all fittings are stainless steel and acid compatible. Connect load hose to appropriate container to load chemical. -Watch for equipment or people moving -Be aware of your surroundings - Watch for Equipment or people moving - Be aware of your surroundings - Watch for equipment or people moving -Watch overhead door -Ensure overhead door is fully open - Watch for chemicals on the ground, totes with chemicals, vapors. -Watch for equipment or people moving - Watch for chemicals on the ground, totes with chemicals, vapors. -Watch for equipment or people moving -Slip/Trip/Fall - Ensure proper PPE-fire retardant coverall, rubber suit, rubber boots, respirator/ safety goggles, hard hat, and rubber gloves. - Parking brake - Be aware of your surroundings - Ensure proper PPE-fire retardant coverall, rubber suit, rubber boots, respirator/ safety goggles, hard hat, and rubber gloves. - Parking brake - Be aware of your surroundings -Watch for trip hazards and spills - Ensure proper PPE-fire retardant coverall, rubber suit, rubber boots, respirator/ safety goggles, hard hat, and rubber gloves. - Be aware of your surroundings -Watch for trip hazards and spills 10
11 STEP ENERGY (CLAIRMONT) LOADING PROCEDURES FOR TRI QUAD - CONTINUED 6. Enter cab of truck and engage PTO for pump. 7. Ensure vent lines are uncapped and open. Open appropriate sump, engage pump to load and open manual load line valve. 8. When all chemicals are loaded into appropriate compartments, disconnect load line while pump is still engaged. Immediately cap load hose and close manual load line valve. Close sump and vent lines. Shut pump off. - Watch for chemicals on the ground, totes with chemicals, vapors. -Watch for equipment or people moving -Slip/Trip/Fall - Leaks/Spills -Connection not tight/leaking or detaching -fire, fumes, splashes -mechanical breakdowns -pinch points -hose or connection failures -over pressure tank - Leaks/Spills -Connection not tight/leaking or detaching -fire, fumes, splashes -mechanical breakdowns -pinch points -hose or connection failures -over pressure tank - Ensure proper PPE-fire retardant coverall, rubber suit, rubber boots, respirator/ safety goggles, hard hat, and rubber gloves and respirator - Parking brake - Be aware of your surroundings -Watch for trip hazards and spills - Ensure proper PPE-fire retardant coverall, rubber suit, rubber boots, respirator/ safety goggles, hard hat, and rubber gloves and respirator -Never sit in truck when loading -watch under truck for leaks -be aware of your surroundings and pay attention to job at hand -ensure connections are tight and secure -be aware of hand placement when tightening connections -ensure vents are open -properly grounded - Ensure proper PPE-fire retardant coverall, rubber suit, rubber boots, respirator/safety goggles, hard hat, and rubber gloves and respirator -Never sit in truck when loading -watch under truck for leaks -be aware of your surroundings and pay attention to job at hand -ensure connections are tight and secure -be aware of hand placement when tightening connections -ensure vents are open -properly grounded 11
12 STEP ENERGY (CLAIRMONT) LOADING PROCEDURES FOR TRI QUAD - CONTINUED 9. Circulate as required. See Safe Job Procedure for circulating tanks. 10. Get paperwork, check out with guard shack. Safety Items Required X - Leaks/Spills -Connection not tight/leaking or detaching -fire, fumes, splashes -mechanical breakdowns -pinch points -hose or connection failures -over pressure tank -Watch for equipment or people moving Basic PPE - Hard Hat, Safety Glasses, Gloves, Steel Toed Boots, FR Coveralls, Ear Plugs SCBA/SABA Goggles / Face Shield Signs/Barriers Apron / Rubber Gloves Lock Out Harness / Fall Protection Permits First Aid Kit Ventilation Fire Extinguisher Reflective Vest Spotter - Ensure proper PPE-fire retardant coverall, rubber suit, rubber boots, safety goggles, hard hat, and rubber gloves and respirator -Never sit in truck when loading -watch under truck for leaks -be aware of your surroundings and pay attention to job at hand -ensure connections are tight and secure -be aware of hand placement when tightening connections -ensure vents are open -properly grounded Be aware of your surroundings Risk Assessment HIGH HAZARD A condition or practice likely to cause: Permanent disability or loss of life Significant loss or damage to property, equipment, or vehicles greater than $10, Environmental release that impacts off-site property or any waterways Any media that may escalate to provincial coverage Action to be Taken: Quick action or attention is required to reduce the hazard to a level as low as practicable. Supervisor must be informed before work proceeds 12
MONTHLY SAFETY NEWSLETTER
CONTACT ELECTRIC SAFETY NEWSLETTER FOR ENSURE ALL EMPLOYEES AND SUB-CONTRACTORS WORKING FOR AVALANCHE ACID REVIEW THIS NEWSLETTER. IT IS A KEY PART OF OUR SAFETY PROGRAM DECEMBER 2017 VOL.12 MONTHLY SAFETY
More information"PERSONAL PROTECTIVE EQUIPMENT"
PRESENTER'S GUIDE "PERSONAL PROTECTIVE EQUIPMENT" Training for the OSHA PERSONAL PROTECTIVE EQUIPMENT STANDARDS Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More information"PERSONAL PROTECTIVE EQUIPMENT IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "PERSONAL PROTECTIVE EQUIPMENT IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR
More informationOccupational Health Safety and Welfare. Our Policy
Occupational Health Safety and Welfare Our Policy OCUPATIONAL HEALTH AND SAFETY POLICY Management of QI Electrical Services is committed to ensuring, as far as responsibly practicable, that all employees
More informationPrint PERSONAL PROTECTIVE EQUIPMENT
Print PERSONAL PROTECTIVE EQUIPMENT MODULE DESCRIPTION This module will cover how to be as safe as possible when working in an area where you may need personal protective equipment (PPE). OBJECTIVES After
More informationNew Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
More informationHAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE PLAN Kenyon College
HAZARDOUS WASTE OPERATIONS AND EMERGENCY RESPONSE PLAN Kenyon College PURPOSE The purpose of this Emergency Response Plan is to plan for and execute an organized response to hazardous waste spills or releases
More informationHYDROGEN PEROXIDE Railcar Unloading by Self-Priming Pump Technical Data Sheet
HYDROGEN PEROXIDE RAILCAR UNLOADING BY SELF-PRIMING PUMP INTRODUCTION All equipment used for storage and handling of hydrogen peroxide must be dedicated exclusively to hydrogen peroxide service and must
More informationCONSTRUCTION SAFETY SERIES: Personal Protective Equipment
ERI Safety Videos Videos for Safety Meetings C012 CONSTRUCTION SAFETY SERIES: Personal Protective Equipment Leader s Guide Marcom Group Ltd. INTRODUCTION TO THE PROGRAM Structure and Organization Information
More informationAppendix 4C - Sample SWMS Trenching
Appendix 4C - Sample SWMS Trenching SAFE WORK METHOD STATEMENT SWMS Reference : Insert document number : Version A Date : Workplace / Project : Company Address: Work Activity / Job / Task or Process :
More informationThis guidance applies to those individuals who perform acid cleaning or chemical treatment aboard Marine Depot Maintenance Command Yermo CA.
Environmental Standard Operating Procedure Document Owner: Environmental Management Division- Paul Willis File Name: ACL-ESOP 02H001V3 Effective Date: Sep 2008 Revised: 27 Apr 15 Title: Acid Cleaning (Chemical
More informationEngineers. Kristin Petaski, P.Eng Mike Gordon, P.Eng
Engineers Kristin Petaski, P.Eng Mike Gordon, P.Eng What we will cover: Introduction to Administrative Controls Safe Work Procedures Training Lockout Emergency Plans Questions? Hierarchy of Controls Effectiveness
More information"SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM
More informationBOILER MECHANIC//SR. BOILER MECHANIC
WORKING IN STEAM MANHOLES Activity Hazard Identification Required Precautions 1. Driving to and from work site. 1. Motor vehicle accident; striking pedestrians, bicyclists, or individuals using rollerblades.
More informationLIQUID OXYGEN. General. Health Effects. Safety Considerations
LIQUID OXYGEN General Oxygen is the second largest component of the atmosphere, comprising 20.8% by volume. Liquid oxygen is pale blue and extremely cold. Although nonflammable, oxygen is a strong oxidizer.
More informationHazard Recognition. Leader s Guide and Quiz
Hazard Recognition Leader s Guide and Quiz 4831 INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order so that employees will see the relationships
More information"SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "SAFETY ORIENTATION IN CONSTRUCTION ENVIRONMENTS" Part of the Construction Safety Kit Series Quality Safety and Health Products, for Today... and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationSAFETY IN THE WORKPLACE
SAFETY IN THE WORKPLACE What is Workplace Safety? What is Workplace Safety? The condition of feeling and being safe. To be free from danger or injury. What is an Injury? A wound. A specific damage to a
More information"RESPIRATORY PROTECTION AND SAFETY"
PRESENTER'S GUIDE "RESPIRATORY PROTECTION AND SAFETY" Training for the OSHA RESPIRATORY PROTECTION STANDARD Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationUniversity of Vermont Department of Physical Plant Personal Protective Equipment Program
University of Vermont Department of Physical Plant Personal Protective Equipment Program REVISED AND DISTRIBUTED BY: THE UNIVERSITY OF VERMONT DEPARTMENT OF PHYSICAL PLANT TRAINING AND COMPLIANCE OFFICE
More informationSAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number K-3.0 Welding Safety Procedures
Number K-3.0 Issued: 1/2009 Revised: 3/2016 Page 1 of 3 1.0 PURPOSE: To standardize procedures associated with production and maintenance welding and to minimize the potential risk of accident or injury
More informationEMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
More informationSafety Plan for Sole Proprietors
Safety Plan for Sole Proprietors SAFETY POLICY Safety Policy for (Company Name) It is the policy of that safety is a number one priority and to provide as safe a workplace as possible for all of our colleagues
More informationHandout Activity: HA107
Engines: Motive Power Types: Handout Activity: HA107 Student/Intern information: Name Date Class Identifying hazards Summary A workshop is a hazardous environment. The objective of this procedure is to
More informationPPE Refresher- Levels of Protection
PPE Refresher- Levels of Protection The combination of respiratory and chemical protective clothing is described as Levels of Protection A, B or C. Level D is work clothes; these provide no respiratory
More informationConstruction Technology Safety Board WHMIS
WHMIS Workplace Hazardous Materials Information System (WHMIS) Workplace Hazardous Materials Information System (WHMIS) is a national system for providing employers and workers with information to recognize
More informationMinimum Safety Requirements for Contractors Working on Railway Property
Minimum Safety Requirements for Contractors Working on Railway Property Effective_ April 1, 2007 Introduction Canadian Pacific is committed to provide a Safe and Healthy working environment for all Railway
More informationSafety is a priority at Vault Pipelines.
Safety is a priority at Vault Pipelines. At Vault Pipelines we believe that every incident is preventable and that every task can be completed safely and efficiently. We will achieve this through our cultural
More information1b. Slipping; tripping; getting knocked into by pedestrians.
MAINTAINING AND REPAIRING HYDRAULIC AND TRACTION PASSENGER AND FREIGHT ELEVATORS AND HANDICAP EQUIPMENT Activity Hazard Identification Required Precautions 1. Walking to and from work site. 1a. Back ache;
More informationU.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL
SAFE -14 Page 1 of 8 U.S. CONCRETE, INC. SAFETY POLICY and PROCEDURE MANUAL FUNCTION Safety TOPIC Hotwork Permit Program OBJECTIVE(S): GENERAL POLICY: To provide a work atmosphere that is conducive to
More informationCOREWEST DIAMOND DRILLING LTD. * ENVIROMENT, HEALTH AND SAFETY PROGRAM* APPENDIX A GENERAL WORKSAFE PRACTICES
COREWEST DIAMOND DRILLING LTD. * ENVIROMENT, HEALTH AND SAFETY PROGRAM* APPENDIX A- - - - - - - GENERAL WORKSAFE PRACTICES 1) HEALTH AND SAFETY POLICY 2) PERSONAL PROTECTIVE EQUIPMENT 3) HOUSEKEEPING 4)
More information1.1 OHS Policy and Responsibilities
1.1 OHS Policy and Responsibilities At Canadian Rope Access Specialists Inc. safety is our primary concern and the health and safety of our employees, clients and contractors is of paramount importance
More information"PERSONAL PROTECTIVE EQUIPMENT A REFRESHER PROGRAM"
MAJOR PROGRAM POINTS "PERSONAL PROTECTIVE EQUIPMENT A REFRESHER PROGRAM" Training for the OSHA PERSONAL PROTECTIVE EQUIPMENT STANDARDS Quality Safety and Health Products, for Today...and Tomorrow OUTLINE
More informationPersonal Protective Equipment
Northland Community & Technical College June 1, 2017 Personal Protective Equipment Safety Officer Cory Feller Chemical Hygiene Officer Kristel Kizer Telephone: 218-683-8633 1 Personal Protective Equipment
More informationSAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030
SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030 HIGH RISK APT AM Holdings Pty. Ltd. [ABN] 95124754383 Principal Contractor (PC) APA Group Level 19, HSBC Building 580 George
More informationTEMPLE UNIVERSITY ENVIRONMENTAL HEALTH AND RADIATION SAFETY
Purpose In accordance with applicable regulations and Temple University, this policy was developed to minimize exposure to glutaraldehyde. Applicability This policy is applicable to all Temple University
More informationSafe Work Instructions For Oxygen Acetylene Equipment
Safe Work Instructions For Oxygen Acetylene Equipment Policy Sponsor: Assistant Vice President Facilities Management Responsible Unit: Trade Services Approval Date: September 2010 Revisions: January 2018
More informationStudent Shop Safety. University of Tennessee Safety Guide GS-005. Purpose. Scope and Applicability. Definitions and Abbreviations.
Student Shop Safety University of Tennessee Safety Guide GS-005 Document Contact: EHS Date effective: August 1, 2012 Revision Date: June 7, 2017 Purpose Machine shops are present in many departments and
More informationCoworkersafetyrulesforICFLaborers andplacingcrew. VERSION5.0.0
CoworkersafetyrulesforICFLaborers andplacingcrew. VERSION5.0.0 CALIFORNIA Proposition 65 Warning Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer,
More information1. The Importance of PPE and Signage for SMEs
Contents 1. The Importance of PPE and Signage for SMEs... 3 2. Business types/sectors that will typically require PPE... 4 3. Basic principles of PPE... 5 4. Hand Protection... 6 5. Feet Protection...
More informationCONSTRUCTION SAFETY SERIES: Safety Orientation
ERI Safety Videos Videos for Safety Meetings C001 CONSTRUCTION SAFETY SERIES: Safety Orientation Leader s Guide Marcom Group Ltd. INTRODUCTION TO THE PROGRAM Structure and Organization Information in this
More information2. Ensure operator visibility. 1. Always wear personal protective equipment.
A Safe Operation Safety Tips for underground mining operations W hether you are mining gold, zinc, diamonds, coal or copper, an underground mine can be dangerous. Special precautions need to be considered
More informationNew Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety.
New Hire Safety Orientation Welcome to Flexicrew, our number one priority is you and your safety. 1 New Employee Responsibilities As a contract worker with Flexicrew Staffing, I understand by signing this
More information75 Years of Health and Safety Guidance
H&S Guide: 60 Working Risks Personal Protective Equipment Personal Protective Equipment (also known as PPE) Employers have duties concerning the provision and use of personal protective equipment at work.
More informationSafe Work Method Statement. Hook up and Towing - Risk Assessment
Hook up and Towing - Risk Assessment WORK STRUCTURES ABN: 97142401501 Work Activity/ Task: Hook up & Towing Caravan Address: 4 KAMHOLTZ CRT ASHMORE 4214 QLD Phone: 0404600001 Email: sales@caravans-australia.com.au
More informationSafe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN
JOB NO: PROJECT: DATE: 1/1/2018 SWMS NO: SWMS 001.1 PREPARED BY: LUKE BLINCO REVISED BY: ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: MINIMUM PERSONAL PROTECTIVE EQUIPMENT (PPE) REQUIREMENTS
More informationHow severely could the risk hurt someone?
Safe Work Method Statement No: WMS-08 Task: Install Drainage This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
More informationSafety at Work. Rules for Staying Alive
Safety at Work Rules for Staying Alive Safety at Work Rules for Staying Alive Introduction The purpose of Dana Gas Rules For Staying Alive is to address the key causes of deaths in our industry. These
More informationHAZARDS AND RISKS ASSOCIATED WITH THE USE OF RIDE ON MOWERS
Safe Systems of Working Use of Ride on Mowers INTRODUCTION This Method Statement covers the safe working practices to be followed when using a ride on mower and should be used alongside the manufacturers
More informationChapter 4 - Personal Protective Equipment
Chapter 4 - Personal Protective Equipment - Use Responsibility, and Cost - Training - Protective Apparel - Foot Protection - Eye Protection - Hand Protection - Hearing Protectors - Head Protection - Respirators
More information1. What is the top priority when working on Canadian Pacific (CP) property? 2. When working on CP property what must all Contractors comply with?
1. What is the top priority when working on Canadian Pacific (CP) property? A. Production B. Safety C. Quality D. Project deadline 2. When working on CP property what must all Contractors comply with?
More informationPERSONAL PROTECTIVE EQUIPMENT FOR CHEMICAL EXPOSURES
Page 1 of 5 1.0 PURPOSE: Use of an appropriate ensemble of personal protective equipment (PPE) creates a second line of defense against exposure to hazardous chemicals. Engineering controls, such as fume
More informationHow severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Line Marking This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
More informationSafe Work Method Statement. Set up and Use - Risk Assessment
Set up and Use - Risk Assessment WORK STRUCTURES ABN: 97142401501 Work Activity/ Task: Set up & Use of Caravan Address: 4 KAMHOLTZ CRT ASHMORE 4214 QLD Phone: 0404600001 Email: sales@caravans-australia.com.au
More informationHOT OILING OPERATIONS ALL HSE PRC 172. Approved By: Manager, HSE Performance Assurance. Table of Contents
Owner: HSE Performance Assurance ALL HSE PRC 172 Approved By: Manager, HSE Performance Assurance Retention Code: CG01 CA Revised: March 2015 Review Frequency: Five years or less Table of Contents 1.0 Purpose...
More informationOpen toed shoes, sandals, or shoes made of loosely woven material should not be worn in the laboratory.
JEFFERSON COMMUNITY AND TECHNICAL COLLEGE SAFETY MANUAL SECTION VIII: LABORATORY SAFETY EFFECTIVE: JULY 1, 2009 TOPIC VIII 0050: LABORATORY ATTIRE AND REVISED: PERSONAL PROTECTIVE EQUIPMENT PROPER ATTIRE
More informationSAFETY AND HEALTH IN THE USE OF CHEMICALS AT WORK
THEME nº44: RESPONSIBLE: Basics Principles of Prevention FOUR PRINCIPLES OF OPERATIONAL CONTROL The general objective in the control of hazards relating to chemicals in the workplace is to eliminate or
More informationENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT
ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT PERSONAL PROTECTIVE EQUIPMENT Table of Contents A. Scope... 1 B. General Requirements... 1 C. Responsibility... 1 1. Supervisor... 1 2. Department
More informationConfined Space. Program Responsibilities
Confined Space CONFINED SPACE ENTRY AND RESCUE The OSHA standard on Permit-Required Confined Spaces (29 CFR 1910.146) requires employers to implement practices and procedures to protect employees from
More informationBitumen Delivery Driver Inductions Eurobitume UK
Bitumen Delivery Driver Inductions Eurobitume UK The information in this module is given in good faith and belief in its accuracy at the time of publication, but does not imply any legal liability or responsibility
More informationCHAPTER 26 WELDING AND CUTTING
CHAPTER 26 WELDING AND CUTTING Revised 7/2010 1 WELDING AND CUTTING Responsibilities 1. The County Safety Officer is responsible for providing appropriate safety instructions for supervisor's use on welding
More informationPERSONAL PROTECTIVE EQUIPMENT
C H A P T E R 9 PERSONAL PROTECTIVE EQUIPMENT 9.1. General Personal protective equipment (PPE) when properly used and maintained saves lives and reduces injury and illness. PPE includes equipment for eyes,
More informationLABORATORY HAZARD AWARENESS TRAINING
Open minds. Open doors. TM LABORATORY HAZARD AWARENESS TRAINING FOR NON LABORATORY PERSONNEL Objectives Hazard Awareness Be familiar with the hazards, warning signs and labels Protective measures PPE Training
More informationOKLAHOMA CITY COMMUNITY COLLEGE PERSONAL PROTECTIVE EQUIPMENT PROGRAM. Environmental Health and Safety
OKLAHOMA CITY COMMUNITY COLLEGE PERSONAL PROTECTIVE EQUIPMENT PROGRAM Environmental Health and Safety Reviewed and Revised: August 28, 2008 Reviewed and Revised: August 6, 2010 Reviewed and Revised: September
More informationSAFE WORK METHOD STATEMENT SWMS No Version
SAFE WORK METHOD STATEMENT SWMS No Version Company Name: Hunter Readymixed Concrete Pty Ltd 00 004 Location: Thornton Cessnock Tea Gardens Gateshead ABN: 6 076 08 695 SWMS Developed By: Duane Harrison
More information2017 FARM SAFETY QUIZ Summer Farm Employment Program
2017 FARM SAFETY QUIZ Summer Farm Employment Program Review the Farm Safety Resource Disc and X-Treme Safety booklet. You can find the answers to these quiz questions from those sources, your employer
More informationPERSONAL PROTECTIVE EQUIPMENT
TRAINING GUIDE PERSONAL PROTECTIVE EQUIPMENT 1994 Before you begin the meeting... Does this topic relate to the work the crew is doing? If not, choose another topic. Has the crew completed basic Hazard
More informationCompliance Requirements
Compliance Requirements The compliance requirements for OSHA s Personal Protective Equipment regulations are very straightforward, and logical. GENERAL REQUIREMENTS (29 CFR 1910.132) The general OSHA Personal
More information2106 PEDESTRIAN SAFETY IN INDUSTRY
ERI Safety Videos Videos for Safety Meetings 2106 PEDESTRIAN SAFETY IN INDUSTRY Leader s Guide 2000, ERI PRODUCTIONS INC. PEDESTRIAN SAFETY IN INDUSTRY This easy-to-use Leader s Guide is provided to assist
More informationTRANSPORT EMERGENCY REPONSE PLAN
TRANSPORT EMERGENCY REPONSE PLAN The Core Objectives of the Transport Emergency Response Plan (TERP) are to Minimise adverse effects on employees and the general public, damage to property, or harm to
More informationBig Ox Energy - Siouxland LLC. Safety Management System. Authority: President
Issuing Dept: Safety Page: Page 1 of 5 Purpose For safe operation, Big Ox Energy - Siouxland LLC requires that all employees and contractors use and wear (Personal Protective Equipment) as set out in our
More informationMAINTENANCE MECHANIC RCF
REPAIRING AND REPLACING VALVES AND COILS MAINTENANCE MECHANIC Activity Hazard Identification Required Precautions 1. Walking to and from work site. 1a. Back ache; overexertion from carrying heavy weight.
More informationFORKLIFT SAFETY LESSONS FOR THE SAFE PEDESTRIAN
FORKLIFT SAFETY LESSONS FOR THE SAFE PEDESTRIAN This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief description of the program
More informationRulesforLaborers,Oilers, andtheplacingcrew VERSION7.0.1
RulesforLaborers,Oilers, andtheplacingcrew VERSION7.0.1 CALIFORNIA Proposition 65 Warning Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth
More informationCHEMISTRY FACULTY LABORATORY SAFETY CONTRACT CENTRAL CAMPUS
CHEMISTRY FACULTY LABORATORY SAFETY CONTRACT CENTRAL CAMPUS Potential hazards exist in all chemical laboratories and some can cause serious accidents. Fortunately, most accidents can be prevented if each
More informationTask/Step Potential Hazards Recommended Safe Job Procedures
JSA No.: 08-18-14-006 JOB SAFETY ANALYSIS Position Title: Bus Washer Department: Wash Bay Work Location(s): Parking Lot Shop Wash Bay Person(s) Performing This Job: Bus Washers Analysis Start Date: 08/18/2014
More informationPersonal Protective Equipment 29 CFR 1926
Personal Protective Equipment 29 CFR 1926 OSHA- PPE http://www.osha.gov/publications/osha31 51.html NIOSH s Protective Clothing Web Page http://www.cdc.gov/niosh/npptl/topics/prot clothing/ 1926.95 PPE
More informationWEEKLY SAFETY MEETING
Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read
More informationAutomotive Safety Checklist
Automotive Safety Checklist Facility: Address: Date: Initials: General Is your Accident Prevention Program implemented and personalized to your facility? Is the Accident Prevention Program accessible to
More informationCONTRACTOR SAFETY RULES
CONTRACTOR SAFETY RULES CONTRACTOR SAFETY RULES AND REGULATIONS This manual sets forth policy with regards to contractor safety. Each Quinn facility consists of one or several diverse operations under
More informationPERSONAL PROTECTIVE EQUIPMENT PROGRAM INTERNAL AND EXTERNAL PAGE: 1 DEPARTMENT: ALL OF: 5
INTERNAL AND EXTERNAL PAGE: 1 1.0 OBJECTIVE The Federal Occupational Safety and Health Administration (OSHA) requirements for personal protective equipment (PPE) are presented in 29 CFR 1910.132 General
More informationCONSTRUCTION SAFETY PROGRAM FOR. Golder Acoustics Inc.
CONSTRUCTION SAFETY PROGRAM FOR Golder Acoustics Inc. TABLE OF CONTENTS Topic... Page Safety and Health Policy... 2 Safety and Health Objectives... 3 Job Site Inspections... 4 Contractor Safety Administrator...
More informationUniversity of Massachusetts Dartmouth
Page 1 of 7 University of Massachusetts Dartmouth College of Engineering Mechanical Engineering Department Best Laboratory Safety Practices This handbook intends to provide you with essential safety information
More informationHOW-TO CONDUCT A WEEKLY SAFETY MEETING
HOW-TO CONDUCT A WEEKLY SAFETY MEETING 1. Hold the meeting on the job, preferably where everyone can sit and relax. 2. Hold the meeting at the beginning of the shift, right after lunch, or after a break.
More informationHEAT EXCHANGE AND TRANSFER, INC. 500 Superior Street Carnegie, PA (412) Fax: (412)
SECTION Bypass Oil Sampling Station (B.O.S.S 1000) GENERAL.......................... SAFETY........................... Hazards............................... Personal Protective Equipment........... PRODUCT
More informationSAFETY POLICY Office Address 5195 W. 58 th Ave. Unit F Arvada, CO 80002
SAFETY POLICY Office Address 5195 W. 58 th Ave. Unit F Arvada, Office CO Address 80002 5195 W. 58 th Ave. Unit F Arvada, CO 80002 303-223-5716 www.valiantcc.com info@valiantcc.com 303-223-5716 info@valiantcc.com
More informationPPE PERSONAL PROTECTIVE EQUIPMENT PROGRAM
PPE PERSONAL PROTECTIVE EQUIPMENT PROGRAM April 2017 CONTENTS Section 1: Introduction... 1 Section 2: Purpose...1 Section 3: Roles and Responsibilities... 2 Section 4: Hazard Assessment and Equipment Selection...
More informationOFFICE OF STATE HUMAN RESOURCES
OFFICE OF STATE HUMAN RESOURCES NUMBER: PPE-1 TOTAL PAGES: 8 SUBJECT: Personal Protective Equipment Program Effective Date: Revision Date: Revision #: RELATED LEGISLATION: The purpose of this program is
More informationParts & Operators Manual
Parts & Operators Manual (888) 317-5878 www.talet.ca To The Owner General Comments Congratulations on the purchase of your new Talet Mat Grapple. Your unit was carefully designed and manufactured to give
More informationPERSONAL PROTECTIVE EQUIPMENT
PERSONAL PROTECTIVE EQUIPMENT Engr. Anwar ul Haq Siddiqui Technical Adviser : Mehran Oil (Pvt) Limited Chairman : FPCCI Standing Committee on Science & Technology INTRODUCTION Life is a precious gift of
More informationToday s Talk: Mon Tue Wed Thu Fri Sat Sun
Today s Talk: Mon Tue Wed Thu Fri Sat Sun WORKER SAFETY - Head to Toe Personal Protective Equipment & Fatigue Management PERSONAL FATIGUE MANAGEMENT Fatigue is a state of physical or mental weariness that
More information"SAFETY HOUSEKEEPING AND ACCIDENT PREVENTION"
PRESENTER'S GUIDE "SAFETY HOUSEKEEPING AND ACCIDENT PREVENTION" Part of the "SAFETY MEETING KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE
More informationTennessee Tech University Environmental Health and Safety
Tennessee Tech University Environmental Health and Safety Introduction to OSHA Standard for Formaldehyde Requirements of regulation Permissible exposure limits (PELs) Routes of exposure and health effects
More informationYeo Soh Bee A/Prof Dan Yock Young 28/03/2016 Prepared by Approved By Issue Date
Page: 1 of 6 Yeo Soh Bee A/Prof Dan Yock Young 28//2016 Prepared by Approved By Issue Date 1. OBJECTIVE The purpose of this SOP is to outline the procedures of cleaning up chemical spills. It will provide
More informationRISK CONTROL SOLUTIONS
RISK CONTROL SOLUTIONS A Service of the Michigan Municipal League Liability and Property Pool and the Michigan Municipal League Workers Compensation Fund REDUCING EXPOSURES FROM CONFINED SPACE ENTRY Over
More informationEH&S Program Occupational Safety Next Review: 5/9/19. Scope: University Wide Original date created: 2006
Environmental Health & Safety Policy and Procedure Subject: Confined Space Entry Policy & Procedure Published Date: 5/9/18 EH&S Program Occupational Safety Next Review: 5/9/19 Scope: University Wide Original
More informationPersonal Protective Equipment. OSHA Office of Training and Education 1
Personal Protective Equipment OSHA Office of Training and Education 1 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances,
More informationSection 1. Contact Information. Procedure Title: Procedure Author: Date of SOP Creation/Revision: Name of Responsible Person: Location of Procedure:
Western Carolina University Standard Operating Procedure for the use of Sodium amide This is an SOP template for a specific chemical or class of chemicals and is not complete until: 1) lab specific information
More informationCHEMICAL HANDLING AND SPILL KITS GROUP WHS JAN 2017
CHEMICAL HANDLING AND SPILL KITS GROUP WHS JAN 2017 LEARNING OUTCOMES On completion of this presentation the participant will be able to: Reduce the likelihood of different types of spills within the workplace
More informationHealth & Safety Policy
Health & Safety Policy I. OBJECTIVE The Safety Policy of Knaggs Developers Limited is designed to comply with the Standards of the Occupational Safety and Health Act 2004, and to endeavor to maintain a
More information