Size 10 (D05) p max 320 bar (4600 PSI) Technical Features. Technical Data. Port dimensions ZB10A(B) SMT_0019 ZB K -
|
|
|
- Clara Copeland
- 5 years ago
- Views:
Transcription
1 ase late with with ressure Relief Valve for Serial lates ssemblies Z0 Size 0 (D05) p max 320 bar (4600 SI) echnical Features ank cover mounted base manifold for hydraulic power packs which require one directional valve, optionally stackable with D0-Z0 (Cat. 0008) serial plates Designed for flange mounted valves with pattern acc. to ISO (CEO 05) Simplified models Z0L* for cost effective circuit design and assembly with stackable serial D0-Z0 plates Integrated functions for circuit unloading drain, main circuit check and pressure relief valves Suitable for mounting the pump drive unit horizontally on the tank cover, or for vertical arrangement with the pump situated in the tank under the oil level Variety of models support the build-up of systems with constant or regulated pumps In the standard version, the Z0() manifold housing is zinc-coated for 520 h and the steel parts are uinc-coated for 240 h protection acc. to ISO 922. luminium Z0L manifold housing is without any surface protection ISO (CEO 05) echnical Data 3,2(0.3) 4xM6-6Hx5+/8-2 46(.8) 24,6(0.9) 39,(.56) * 6,(0.66) 2(.06) 3,3(.4) 50,8(2.0) 3,5(0.53) orts,,, - max.2 mm (0.44 in) *ort * only with model Z0()-Q2 54(2.3) Modular valves mounting surface 0 (D05) Cartridge cavity 8x.5 / Q2, 5x.5 / Q2 bar (SI) aluminium 250 (3626) Max. operating pressure bar (SI) steel 320 (4640) Max. flow l/min (GM) 50 (3.2) for Q2 20 (3.) for Q2 Z0()-Q2(Q2)*S* Z0L-Q2*L* ase plate Simplified base plate... G3/4... G3/4 ort dimensions,,,, 2, D2,, 2, 3... G/2,,, D2, 2... G/2 M,,... G/4 M... G/4 L2... G/8 - Mass Z0() steel 6.3 (3.9) steel 9.3 (20.5) kg (lbs) Z0L - aluminium 2.5 (5.5) Data sheet ype General information GI_0060 roducts and operating conditions Cavity details / Mounting interface SM_009 SM-Q2*, SM-Q2* Size 0 / CEO 05 Studs and nuts for vertical stacking assemblies - Dn04, 06, 0_0020 Ordering Code Z K - ase manifold with pressure relief valve for D serial plates assembly Size, mounting interface of serial plates base plate for D0-Z0 serial plates K Surface treatment No designation aluminium manifold without threatment zinc-coated (ZnNi), ISO 922 (520 h) Seals seal plate for oil tank cover assembly Models with one mounting interface acc. to ISO 440, DIN (CEO 05) with check valve L S Material of base manifold aluminium, EN W-05 6* steel** *only for Z0L models **only for Z0() models Models without mounting interface acc. to ISO 440, DIN (CEO 05) L 3 Design models for Z0L types return line from bottom side two return lines from plate and bottom side ressure relief valve cavity 8x.5 / Q2 (V-06,V2-06)* 5x.5 / Q2 (V-0)* Q2 Q2 *ressure relief valve is not supplied with the Z block see catalogue: H_506 (V-06, V-0), H_5062(V2-06) Drain valve option without drain valve without drain valve with drain valve with drain valve Design models for Z0() + Connection - without - ports connection with - ports connection without - ports connection with - ports connection age Subject to change Z0_002_2en_/20
2 Functional Symbols Models for flange mounted valves with pattern acc. to ISO (CEO 05) with check valve Z0*- Z0*-2 Z0*-2 Z0*-22 Z0*- Z0*-2 mounting interface of D0-Z0 (cat. 0008) serial plates ressure relief valve* Drain valve 3 M 3 M 3 M 3 M 3 M 3 M Models for flange mounted valves with pattern acc. to ISO (CEO 05) Simplified models Z0L* without mounting pattern for modular valve Z0*-2 Z0*-22 Z0L*- Z0L*-3 mounting interface of D0-Z0 (cat. 0008) serial plates M *ort 3 only with model Z0()-Q M ort dimensions Z0()-Q2* G 3/4,,,, 2, D2,, 2 G /2 L2 G /8 M,, G /4 ort dimensions Z0()-Q2*, G 3/4,,,, 2, D2, 2, 3* G /2 L2 G /8 M,, G /4 M D2 M D2 2 ort dimensions Z0L-Q2* G 3/4,,, D2, 2, G /2 M G /4 ressure relief valve is not supplied with the Z block pplication ab. Z0()Q2*S, zinc-coated Ordering number ype ressure [bar] Weight [kg] Z0-Q2--SK Z0-Q2-2-SK Z0-Q2-2-SK Z0-Q2-22-SK Z0-Q2--SK- 320 cca Z0-Q2-2-SK Z0-Q2-2-SK Z0-Q2-22-SK- 320 ab. 2 Z0()Q2*S, zinc-coated Ordering number ype ressure [bar] Weight [kg] Z0-Q2--SK Z0-Q2-2-SK Z0-Q2-2-SK Z0-Q2-22-SK Z0-Q2--SK- 320 cca Z0-Q2-2-SK Z0-Q2-2-SK Z0-Q2-22-SK- 320 ab. 3 Z0LQ2* L, aluminium versions Ordering number ype ressure [bar] Weight [kg] Z0L-Q2--L 250 cca Z0L-Q2-3-L age 2 Subject to change Z0_002_2en_/20
3 vailable types ypical circuit his block enables a great number of circuit arrangements. he shown example represents only one of many possible variants. Z0L*- asic pressure circuit protection and connection with gear pump and return filter Z0*- asic pressure circuit protection and connection with tandem gear pump and return filter with one pump tank unload 5 Z0*-2 System with accumulator Z0*-22 System with accumulator and accumulator charging valve 3 5 Z0* Constant pressure regulation with relief valve (remote control) Z0* Constant pressure regulation (setting on the pump) Q Q Serial plate D0-Z0 ressure relief valve VN2-0/M Directional valve RE4-02R lanking plate for ISO 440 Modular Valve Gear pumps G* Directional valve RE4-0 ressure relief valve V-0, V-06, V Return line filter 8 age 3 Subject to change Z0_002_2en_/20
4 Model Z0-Q2* 4,5 (2.93) 24 (4.88) 00 (3.94) 25 (0.98) 20 (0.8) 8 (0.3) 4xM8 62 (2.4) 2 (2.8) 55,5 (2.2) 36 (.4) 8 (0.32) 25 () 39 (.5) 66 (2.6) 6,5 (3) 90 (3.5) 36 (.42) 50 (.9) 29 (.4) 35 (.38) 5,4 (2.9) 65 (2.56) 32 (.26) 66 (2.6) 98 (3.86) 8 (0.) 20 (0.9) 40 (.5) 5,8 (2.28) 49 (5.83) 63 (2.48) 2x 55,5 (2.9) 50 (.9) 36 (.42) 20,5 (0.8) 29 (.4) 5,4 (2.9) 80 (3.5) mounting interface of D0-Z0 (cat. 0008) serial plates 2 (0.4) 39 (.54) 6,5 (3.0) 86 (3.39) Z0()* Size of ports ort,, L2 M,,,, 2, D2, 2, 3 hread G 3/4 G /2 G /8 G /4 G /2 G /2 of thread (0.3) 2 (0.4) 4 4 Counterbore (.30) (.0) (0.59) (0.9) (.0) (.0) of counterbore 0.5 (0.03) (0.03) (0.02) (0.03) (0.03) (0.03) O-Ring [mm] 23.8x age 4 Subject to change Z0_002_2en_/20
5 Model Z0-Q2* 4xM8 8 (0.3) 25 (.0) 39 (.5) 66 (2.6) 6,5 (3.0) 4.5 (2.93) 32 (.26) 90 (3.54) 82 (3.23) 30 (.8) 8 (0.) 2 (2.83) 65.5 (2.58) 46 (.8) 90 (3.5) mounting interface of D0-Z0 (cat. 0008) serial plates 4 (.85) 3 (4.45) 60 (2.36) (4.6) 50 (.9) 65.5 (2.58) (4.6) 0 (2.6) 29 (.4) 35 (5.3) 29, 5 (.6) 88 (3.46) 5 88, 4 (3.48) 98 (3.86) 40 (.5) 35 (.38) 68 (2.6) 2 (2.83) 90 (3.54) 26 (.02) 30 (.8) 40 (.5) 6 (6.5) 5 (2.95) 46 (.8) 30 (.8) 2x 2 (0.4) 39 (.54) 6,5 (3.0) 86 (3.39) Z0()* Size of ports ort,, L2 M,,,, 2, D2, 2, 3 hread G 3/4 G /2 G /8 G /4 G /2 G 3/4 of thread (0.3) 2 (0.4) 4 6 Counterbore (.30) (.0) (0.59) (0.9) (.0) (.30) of counterbore 0.5 (0.03) (0.03) (0.02) (0.03) (0.03) (0.03) O-Ring [mm] 23.8x2.62 age 5 Subject to change Z0_002_2en_/20
6 Model Z0L* 0 (4. 33) 90 (3.54) 39 (.54 ) mounting interface of D0-Z0 (cat. 0008) serial plates 8 ( 0.32 ) 20 ( 0.9) 48 (. 89) 84 ( 3.3) 24,5 ( 0.96) 00 ( 3.94 ) 5 ( 2.95 ) 5 ( 2.0 ) 92 ( 3.62) 64 ( 2.52) 80 ( 3. 5) 48,5 (.9) 60 (6. 30) 50 (. 9) 48 (.89) 55 ( 2. ) - - Dimension [mm (in)] Model L* L*3 6.5 (3.0) 60 (2.36) ort ,5 ( 2.9) 36 (.42) 20,5 ( 0.8) 86 ( 3.39 ) 6,5 ( 3.0 ) 39 (.54 ) 2 ( 0.4 ) Z0L* Size of ports ort,,, D2, 2 M hread G 3/4 G /2 G /2 G /4 of thread Counterbore 6 33 (.30) of counterbore (0.03) O-Ring [mm] 4 28 (.0) (0.03) 23.8x (.0) (0.03) 2 (0.4) 20 (0.9) (0.03) age 6 Subject to change Z0_002_2en_/20
180 Series Rotary Shear Directional Control Valve
180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44
Cooler-Bypass Thermostat Valve, Size 16
Cooler-Bypass hermostat Valve, Size Q max = l/min, p max = bar emperature-controlled, integral relief function, various pressure settings available Description emperature-dependent bypass control Integral
Electrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
005 Series Modular Valves
5 Series Modular Valves ype of Modular Valve Class Graphic Symbols age Solenoid Operated Directional Valve DSG-5- *** - * - ressure Control Valves Flow Control Valves Directional Control Valves Modular
Ball valve-combinations 105 Shut-off blocks with integrated bypass and safety-lock 106 Sandwich plates 108 Accumulator safety blocks 114
able of contents Ball valve-combinations 105 hut-off blocks with integrated bypass and safety-lock 106 andwich plates 108 Accumulator safety blocks 114 with integrated 2-way ball valve type RA 114 with
P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES
52 000/110 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
Leak-Free Load-Control Valve SAE ½ psi flange
Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control
Leak-Free Load-Control Valve, Size 20
Leak-Free Load-Control Valve, Size 20 Qmax = 350 l/min [92 gpm], pmax = 420 bar [6000 psi] leak-proof, two-stage hydraulic, manifold mounting 20--P... 1 Description Whenever large loads are to be precisely
2-way flow control valve Model 2FRM 6
R 28 6/0.98 Replaces R 28 62/05.94 R 28 6/06.98 2-way flow control valve Model 2FRM 6 Nominal size 6 Series X Maximum operating pressure 4569 SI (5 bar) ) Maximum flow 8.45 GM (2 L/min) H//D 585/97 + H//D
E 328 E 498 Tank top mounting Connection up to G1½ and SAE 2 Nominal flow rate up to 600 l/min
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ and SE Nominal flow rate up to 6 l/min Description pplication For operation in units with hydrostatic drives, when the return flow
4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)
4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31
E 158 E 198 E 248. Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min e d
R e t u r n - S u c t i o n F i l t e rs E 158 E 198 E 248 Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min 20.90-5e 0.0-2d D e s c r i p t i o n Application For operation in
Pressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm
Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:
Function. Valve Size. Pilot Oil. p min. Bold: Designates Tier I products and options.
Catalog HY14-255/US echnical Information ilot Operated ressure Reducing Valves Series VMY*6 General Series VMY*6 valves consist of the main stage with valve spools and the pilot stage with the proportional
Directional Controls
Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................
E 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
Monoblock directional control valves ML - Directional control valve
Monoblock directional control valves ML - Directional control valve ML Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD4I - 6--8 ML echnical data Nominal flow
Displacement 12, , Maximum flow rate (at 1450 rpm) bar.
00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment
DNS. Monoblock directional control valves DNS - Directional control valve
Monoblock directional control valves DNS - Directional control valve DNS efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES 398SMD6I - 6--8 DNS echnical data Nominal flow
VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10
/ ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
Axial piston pumps type PVC
www.atos.com Table TA16-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low noise
Axial piston pumps type PVC
www.atos.com Table TA16SK-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low
Digital relief valves D-CG
Digital relief valves D-G unctional Symbols D-G- Specifications Size Maximum working pressure Rated flow Maximum flow Maximum adjustable pressure Ma Minimum control pressure Hysteresis Repeatability emperature
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional
Inverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
Fixed Displacement Plug-In Motor A2FE
www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in
MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.
F MODULES YUKEN's Modular Valves are stack type valves, and require no piping. hey not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking
3-Way Pressure-Reducing Cartridge, Size 2 4
-Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher
ASB Accumulator Safety Blocks
ASB Accumulator Safety Blocks For working pressures up to 350 bar Catalogue HY07-1241/UK Note: In line with our policy of continuing product improvement, specifications in this catalogue are subject to
MECHANICALLY OPERATED DIRECTIONAL VALVES Rotary Type : DRT/DRG-02 Cam Operated : DCT/DCG-01, 03 Threaded Connection/Sub-plate Mounting
MCHNICLLY ORD VLVS Rotary ype : DR/DRG- Cam Operated : DC/DCG-, hreaded Connection/ Mounting General Information Up to 5 Ma (6 SI), L/min (6. U.S.GM) ub. C-6 hese valves are chiefly used to shift the pilot
Pressure relief valves
Pressure relief valves Type DV700 Features Direct operated valve High degree of pressure stability Safe operation Precise pressure adjustment Maximum pressure setting with lock nut Applications as cartridge
INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking:
direct operated INVERSE function available Q max = 2 l/min p max = bar INVERS Description EPDB The direct operated proportional pressure relief valve is built as a slip-in cartridge fitted in a connecting
Auxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998
Auxiliary valve Sequence valve, 3-way Catalogue 9129 8542-02 (GB) 9129 8542-06 (US) October 1998 Sequence valve, 3-way Applications The sequence valve is designed to open or close a hydraulic pilot signal
SPC*01 (2-way) SPC03/06 (2-way) Size NG6 NG10 NG16 NG25 DIN A10 ISO 4401 NFPA D05 CETOP 5 P, A, B:
Catalog HY14-255/US Technical Information General Description sandwich type pressure s are typically used in combination with proportional directional control valves. The keeps the pressure drop over the
SATURNSERIES INTERCHANGE > ISO (for the couplings)
Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
Leak free Pipe Rupture Valve for Excavators
Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................
Pressure relief valve, direct operated
ressure relief valve, direct operated R 25402/05.0 Replaces: 10.05 /1 ype DBD Nominal sizes to 0 Component series 1X Maximum operating pressure 0 bar Maximum flow 0 l/min H5585 Overview of contents Contents
Series MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
AVP-F. p setting range (bar) Code No. 003H6200
Data sheet Differential pressure controller (PN 16) AVP - return and flow mounting, adjustable setting AVP-F - return mounting, fixed setting Description The controller has a control valve, an actuator
Inverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.
Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum
Pilot valve PPCD04-PPRV DATA SHEET
CLSSIC ilot valve CD4-RV D SHEE 294 297 Description SVB pilot valve is a small smooth valve, based on homas Magnetes propotional pressure reducing valve, that controls a limited-flow control feed to a
Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting
Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in
Pressure relief valve, direct operated Type DBD
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly echnologies neumatics Service Automation Mobile Hydraulics RE 25 402/06.02 Replaces: 03.98 Material No.: 00772632a ressure
E 084 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 80 l/min / 21.1 gpm
Return-Suction Filters E 08 Tank top mounting Connection up to G / -6 SE Nominal flow rate up to 80 l/min /. gpm Description pplication For operation in units with hydrostatic drives, when the return flow
SystemStak Valves. ISO4401 Size 02
SystemStak Valves ISO441 Size 2 Reduce System Space Requirements SystemStak valves make compact hydraulic systems in which specific function valves are sandwich mounted between a directional valve and
Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
Pressure reducing valve, direct operated, type DR 5 DP Huade América 1
Pressure reducing valve, direct operated, type DR 5 DP Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, type DR 5 DP Size 5 up to 31.5MPa up to
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 10 DP Nominal size 10 Series 4X Maximum reduced pressure 210 bar (3050 PSI) Maximum flow 80 L/min
R S 280 is a modular parallel sect. Directional Control Valve RS RS In relation to its flow capacity its installation
Directional Control Valve RS 280 3 RS 2802 3102RS28001 R S 280 is a modular parallel sect nal valve. Suitable applications are medium sized and big truck loaders, medium sized backhoe loaders and other
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
VICKERS. SystemStak Valves. ISO ; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B
VICKERS SystemStak Valves ISO 441-3; NF-D3; 315 bar (45 psi); 6 L/min (15.7 USgpm) 1 G 227 uild a Compact, Cost-Effective, Reliable Hydraulic System with Vickers SystemStak Valves Reduces System Space
Hand pump type CH. Product documentation. 300 bar 8.3 cm 3 /stroke. Operating pressure p max : Displacement volume V max stroke :
Hand pump type CH Product documentation Operating pressure p max : Displacement volume V max stroke : 300 bar 8.3 cm 3 /stroke D 7147 CH 04-2018-1.1 by HAWE Hydraulik SE. The reproduction and distribution
Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)
Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min
Fitted with a main pressure relief valve and a load check valve on every working section.
SDS18 1 to 12 sectional directional control valve Fitted with a main ressure relief valve and a load check valve on every working section. Available with arallel and series-arallel (tandem) circuit. Otional
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
Safety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
Pressure reducing valve, pilot operated, Model 3DR
RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features
Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve
Flow Control Valves Series MTK, MTQ, MTC MTQ... MTC... robust, uncomplicated, reliable these valves do not require maintenance. This lowers costs and reduces the risk of a system failure. can be provided
4/3 Directional valve elements L85L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L85L1...
4/3 Directional valve elements L8L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L8L1...(EDC-LV) RE 1831-17 Edition: 2.216 Replaces: 7.12 Size 6 Series Maximum
BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
M18x1,5 ISO Pilot operated pressure relief valve
ressure relief valves ressure relief valve Screw-in cartridge ilot operated Q max = 25 l/min = 4 bar p N max = 35 bar ilot operated pressure relief valve as screwin cartridge with a thread M18x1,5 and
Double Pilot Operated Cartridge Check Valve, Size 8
Double Pilot Operated Cartridge Check Valve, Size 8 Q max = 7 l/min (19 gpm), p max = 35 bar (5 psi) pilot operated, two-stage, spring-closed cartridge-type poppet valve Compact design for cavity type
CV08-20 Check Valve DIRECTIONAL VALVES. DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
DIRECTIONAL VALVES CV08-20 Check Valve DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device. OPERATION The CV08-20 allows flow passage from 1 to 2,
Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1
Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Size
D 042 D 062 In-line mounting Operating pressure up to 100 bar Nominal flow rate up to 90 l/min
Pressure Filters D D 6 In-line mounting Operating pressure up to 1 bar Nominal flow rate up to 9 l/min Description Application In the pressure circuits of hydraulic and lubrication systems. Performance
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting
Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Description AVP(-F) is a self-acting differential pressure controller primarily for use in district heating systems.
Safety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
E 212 E 222 Tank top mounting Connection up to G1¼ Nominal flow rate up to 220 l/min
Return Filters E E Tank top mounting Connection up to G¼ ominal flow rate up to l/min Description pplication In the return line circuits of hydraulic systems. Performance features Protection against wear:
1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type
Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing
PLD 03 T A CASAPPA S.p.A.
GEAR FLOW DIVIDERS INDEX Section Page GENERAL FEATURES... 3 GENERAL DATA... 5 FLOW EQUALIZER... 6 FLOW DIVIDERS... 8 TYPICAL CIRCUITS... 10 NOTES ABOUT COMPOSITION... 12 PORTS DIMENSIONS.... 14 GROUP DIMENSIONS...
zkratka označení: PAL* technický list výrobku vytvořeno :13 1/6 pneumatický pohon série RE > tvrdý anodizovaný hliník NBR
pneumatický pohon série RE > tvrdý anodizovaný hliník zkratka označení: PAL* technický list výrobku Ausf Feder Modell Nm Port DW L B H kg RE161 RE1 RE043 RE6 RE161 RE1,1 bei 6 bar 35,5 bei 6 bar 70,6 bei
E 441 E 451 E 461 E 641 E 700 Tank mounting Nominal flow rate up to 800 l/min
Return Filters E E E 6 E 6 E 7 Tank mounting Nominal flow rate up to 8 l/min Description Application In the return line circuits of hydraulic systems. Performance features Protectionagainst wear: By means
SDM to 8 sections monoblock valve D1WWDA02A
SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information
LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE
LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE SPECIFICATIONS: 10 gpm (38 lpm) Nominal Capacity. Rated up to 4000 psi (275 bar). Port Sizes-Inlet/Outlet #8SAE (3/4-16). Work Ports #8SAE
* Different spooltypes up to 120 l/min. in combination with simultaneously control.
APV-16 Features. * Modular assembly system, suitable for 'Build Program'. * Max. operating pressure 420 bar. * Different spooltypes up to 120 l/min. in combination with simultaneously control. * Compact
Pump safety block. Type DBA, DBAW, DBAE(E) Features. Contents. RE Edition: Replaces: 11.10
ump safety block ype D, DW, DE(E) RE 25891 Edition: 2013-05 Replaces: 11.10 Size 16, 25, 32 Component series 2 Maximum operating pressure 350 bar Maximum flow 400 l/min H5872 Features Depressurized start-up
VP-PSERIES INTERCHANGE > Stucchi profile
VSERES NERHANE > Stucchi profile EHNAL EAURES AN OONS nterchange Stucchi profile Sealing description Nitrile NR onnection system Screw SUH SOLUONS Available sizes from /4 to Material /treatment arbon steel
PRESSURE REDUCING (AND CHECK) VALVES RT/RG RCT/RCG. -03/06/10 (3/8, 3/4, 1-1/4) Threaded Connections / Sub-plate Mounting
REDUING (ND HEK) VLVES RT/RG RT/RG -3// (3/8, 3/, -/) Threaded onnections / Mounting Up to MPa (5 PSI), 5 L /m in (3 U.S.GPM) Pub. E-3 Pressure Reducing Valves Pressure reducing valves are used to set
Lecture 19 PRESSURE-CONTROL VALVES [CONTINUED]
![Lecture 19 PRESSURE-CONTROL VALVES [CONTINUED]](/thumbs/76/73283391.jpg "Lecture 19 PRESSURE-CONTROL VALVES [CONTINUED]")
Lecture 19 PRESSURE-CONTROL VLVES [CONTINUED] 1.5 Counterbalance Valve Schematic diagram of counterbalance valve is shown in Fig. 1.14. These normally closed valves are primarily used to maintain a back
Type 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
E 094 E 103 E 143 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 135 l/min / 35.7 gpm
Return Filters E 9 E E Tank top mounting Connection up to G / -6 SAE Nominal flow rate up to 5 l/min / 5.7 gpm Description Application In the return line circuits of hydraulic systems. Performance features
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
SLEEVED PLUG VALVES 2-WAY
Specialty Valves 2-WAY ANSI/ASME CLASS 150 LBS Dimensions to ANSI B16.5 & B16.10 1 Six (6) top holes * 2 1/2 valves are made from 3 casting, but flanges are machined to 2 1/2 dimensions 1/2 4.25 108.00
Monoblock Directional Control Valve RMB 202
Monoblock Directional Control Valve RMB 202 Key valve features RMB 202 is a 2-section mono block valve, especially designed for front-end loaders. The valve is prepared for quick connecting couplings,
3-Way Safety Block DSV
3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with
Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2
Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).
Hydraulic Accumulators with Back-Up Nitrogen Bottles
Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the accumulator range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum
RE / Meter out pressure compensator Sandwich plate design Type SCA... /Series 2X. Description of function, Section 1/6. Replaces: 09.
Meter out pressure compensator Sandwich plate design Type SCA... /Series X Sizes 6, 5 up to 35 bar up to 35 L/min RE 9 47/.96 RE 9 47/.96 Replaces: 9.87 Sandwich plate design Load compensation in lines
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-2500/US Industrial Hydraulic Valves WARNING USR RSPONSIBILITY FAILUR OR IMPROPR
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 40 to DN 300 Flanges R.F. PN10/16-10 C + 80 C Max Pressure : 16 Bars up to DN200 Specifications : Removable stainless steel filter Bolted bonnet with
directional control valve series cv691
directional control valve series cv691 Contents Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 9 Page 10 Page 11-12 General Information Technical Data Performance Curves Dimensions Relief Valve Advantages
Combined Pressure / Vacuum Relief Valve KITO VD/o
KITO VD/o DN D H kg* vacuum setting (mbar) pressure DIN ANSI DIN ANSI min max min max** 50 PN 16 2 220 332 351 11 3 50 10 75 80 PN 16 3 260 367 387 145 3 50 10 70 100 PN 16 4 260 368 393 178 3 50 10 80
Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
Overview of types. T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2)
Technical data sheet R3015-..-..-B2 / R3020-..-..-B2 Characterised control valves, 6-way, with internal threads Two sequences (cooling/heating) With a rotary actuator 90 Water-side switching or modulating
Differential pressure control and flow limiter AVPB/AVPB-F, PN 16
Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.
Proportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact