CV08-20 Check Valve DIRECTIONAL VALVES. DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.
|
|
|
- Delphia Fletcher
- 5 years ago
- Views:
Transcription
1 DIRECTIONAL VALVES CV08-20 Check Valve DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device. OPERATION The CV08-20 allows flow passage from 1 to 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at 1 to open to 2. FEATURES Hardened seat for long life and low leakage. Optional bias springs for back-pressure application flexibility. Fully guided check assembly. Compact size. Fast closing and seating. ISO SYMBOL PERFORMANCE (Cartridge Only) RATINGS Operating Pressure: 240 bar (3500 psi) Flow Rating: See Performance Chart Internal Leakage: 0.10 ml/minute (2 drops/minute) max. at 240 bar (3500 psi) Temperature: -40 to 100 C (-40 to 212 F) with Buna N seals; -26 to 204 C (-15 to 400 F) with fluorocarbon seals; -54 to 107 C (-56 to 225 F) with polyurethane or urethane seals. Filtration: See page Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cst (50 to 2000 sus); See Temperature and Oil Viscosity, page Installation: No restrictions; See page Cavity: VC08-2; See page Cavity Tool: CT08-2XX; See page Seal Kit: SK08-2X-X; See page Pressure Drop vs. Flow - Port 1 to 2 (Cartridge only with 0.7 bar/10 psi spring) 32 cst/150 sus oil at 40 C (104 F) 6.9/ /80 4.1/60 2.8/40 1.4/
2 HYDRAFORCE CV08-20 DIMENSIONS ALUMINUM BODY SHOWN ACROSS FLATS TORQUE ft. lb. ( Nm) MATERIALS Cartridge: Weight: 0.05 kg. (0.12 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and back-up standard. Standard Ported Body: Weight: 0.16 kg. (0.35 lbs.) Anodized highstrength aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions may differ. See page TO ORDER CV Porting Cartridge Only 0 SAE 4 4T SAE 6 6T 1/4 in. BSP* 2B 3/8 in. BSP* 3B 1/2 in. BSP* 4B *BSP Body; U.K. Mfr. Only Bias Spring bar (4 psi) bar (10 psi) bar (25 psi) bar (40 psi) bar (60 psi) bar (100 psi) bar (150 psi) bar (200 psi) bar (270 psi) M bar (363 psi) Seals N Buna N (Std.) V Fluorocarbon HV Fluorocarbon P Polyurethane U Urethane
3 DIRECTIONAL VALVES CV10-20 Check Valve ISO SYMBOL DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device. OPERATION The CV10-20 allows flow passage from 1 to 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at 1 to open to 2. FEATURES Hardened seat for long life and low leakage. Optional bias springs for back-pressure application flexibility. 300 psi bias spring option with tall cap available. Fully guided check assembly. Industry common cavity. RATINGS Operating Pressure: 240 bar (3500 psi) Proof Pressure: 350 bar (5075 psi) Flow Rating: 75.8 lpm (20 gpm) Internal Leakage: 0.10 ml/minute (2 drops/minute) max. at 240 bar (3500 psi) Temperature: -40 to 100 C (-40 to 212 F) with Buna N seals; -26 to 204 C (-15 to 400 F) with fluorocarbon seals; -54 to 107 C (-56 to 225 F) with polyurethane or urethane seals. Filtration: See page Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cst (50 to 2000 sus); See Temperature and Oil Viscosity, page Installation: No restrictions; See page Cavity: VC10-2; See page Cavity Tool: CT10-2XX; See page Seal Kit: SK10-2X-T; See page PERFORMANCE (Cartridge Only) Pressure Drop vs. Flow - Port 1 to 2 with 2.1 bar/30 psi spring ; with 0.34 bar/5 psi spring - - -; 32 cst/150 sus oil at 40 C (104 F) 8.6/ / /75 3.4/50 1.7/ / / / /80 4.6/60 2.8/40 1.4/ Pressure Drop vs. Flow 40 psi 15 psi 2 psi 32 cst/150 sus oil at 40 C (104 F) / / / / / / / / Pressure Drop vs. Flow 200 psi 100 psi 70 psi 32 cst/150 sus oil at 40 C (104 F)
4 HYDRAFORCE CV10-20 DIMENSIONS ALUMINUM BODY SHOWN TORQUE ft. lbs. ( Nm) MATERIALS TO ORDER Cartridge: Weight: 0.08 kg. (0.18 lbs.) T option weight: 0.12 kg. (0.26 lb.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and polyester elastomer back-ups standard. Standard Ported Body: Weight: 0.16 kg. (0.35 lbs.) Anodized highstrength aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions may differ. See page CV Adaptor Option Tall Adaptor T *Required for 300 psi spring Porting Cartridge Only 0 SAE 6 6T SAE 8 8T 1/4 in. BSP* 2B 3/8 in. BSP* 3B 1/2 in. BSP* 4B *BSP Body; U.K. Mfr. Only Bias Spring bar (2 psi) bar (5 psi) 15 1 bar (15 psi) bar (30 psi) bar (40 psi) bar (70 psi) bar (100 psi) bar (200 psi) 300* 20.4 bar (300 psi) *Requires T Option Seals N Buna N (Std.) V Fluorocarbon HV Fluorocarbon P Polyurethane
5 DIRECTIONAL VALVES CV10-24 Check Valve DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device. OPERATION The CV10-24 allows flow passage from 2 to 1, while blocking flow from 1 to 2. The cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at 2 to open to 1. FEATURES Low check mass for anti-cavitation applications. Hardened seat for long life and low leakage. Optional bias springs for back-pressure application flexibility. Industry common cavity. ISO SYMBOL PERFORMANCE (Cartridge Only) 5.5/80 4.1/60 2.8/40 1.4/20 Port 2 to 1 (with 0.34 bar/5 psi spring) 32 cst/150 sus oil at 40 C RATINGS Operating Pressure: 240 bar (3500 psi) Flow: See Performance Chart Internal Leakage: 0.25 ml/minute (5 drops/minute) max. at 241 bar (3500 psi) Crack Pressure Defined: Gauge psi evident at 2 at 16.4 cc/minute (1 cu. in./minute) attained at 1 Standard Bias Springs at Crack: 0.35 bar (5 psi); 1.7 bar (25 psi); 3.8 bar(55 psi) Temperature: -40 to 120 C (-40 F to 250 F with Buna N seals; -35 C to 204 C (-31 F to 400 F) with Viton seals Filtration: See page Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cst (50 to 2000 sus); See Temperature and Oil Viscosity, page Installation: No restrictions; See page Cavity: VC10-2; See page Cavity Tool: CT10-2XX; See page Seal Kits: SK10-2X-B; See page
6 HYDRAFORCE CV10-24 DIMENSIONS MATERIALS Cartridge: Weight: 0.9 kg. (0.20 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and polyester elastomer back-ups standard. Standard Ported Body: Weight: 0.16 kg. (0.35 lbs.); Anodized highstrength 6061 T6 aluminum alloy, rated to 240 bar (3500 psi). Ductile iron bodies available; dimensions may differ. See page TO ORDER CV Porting Cartridge Only 0 SAE 6 6T SAE 8 8T 1/4 in. BSP* 2B 3/8 in. BSP* 3B 1/2 in. BSP* 4B *BSP Body; U.K. Mfr. Only Bias Spring bar (5 psi) bar (25 psi) bar (55 psi) Seals N Buna N (Std.) V Viton
7 DIRECTIONAL VALVES CV12-20 Check Valve ISO SYMBOL PERFORMANCE (Cartridge Only) P SS OP bar/psi 5.5/80 4.1/60 2.8/40 1.4/20 Pressure rop vs. Flow Port 1 to 2 32 cst/150 sus oil at 40 C (104 F) 2.1 bar/30 psi spring bar/5 psi spring FO lpm/gpm DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device. OPERATION The CV12-20 allows flow passage from 1 to 2, while normally blocking oil flow in the opposite direction. The cartridge has a fully guided check which is spring-biased closed until sufficient pressure is applied at 1 to open to 2. FEATURES Hardened seat for long life and low leakage. Optional bias springs for back-pressure application flexibility. Fully guided check assembly. Cost-effective cavity. RATINGS Operating Pressure: 240 bar (3500 psi) Proof Pressure: 420 bar (6090 psi) Flow: See Performance Chart Internal Leakage: 0.25 ml/minute (5 drops/minute) max. at 240 bar (3500 psi) Crack Pressure Defined: Gauge bar (psi) evident at 1 at 16.4 cc/minute (1 cu. in./minute) attained Standard Bias Springs at Crack: 0.34 bar (5 psi); 1.7 bar (25 psi); 4.1 bar (60 psi) Temperature: -40 to 100 C (-40 to 212 F) with Buna N seals; -26 to 204 C (-15 to 400 F) with fluorocarbon seals; -54 to 107 C (-56 to 225 F) with polyurethane or urethane seals. Filtration: See page Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cst (50 to 2000 sus); See Temperature and Oil Viscosity, page Installation: No restrictions; See page Cavity: VC12-2; See page Cavity Tool: CT12-2XX; See page Seal Kit: SK12-2X-T; See page
8 HYDRAFORCE CV12-20 DIMENSIONS ALUMINUM BODY SHOWN TORQUE FT. LBS. ( Nm) MATERIALS Cartridge: Weight: 0.17 kg. (0.38 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and polyester elastomer back-ups standard. Standard Ported Body: Weight: 0.57 kg. (1.25 lbs.) Anodized highstrength aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions may differ. See page TO ORDER CV Porting Cartridge Only 0 SAE 10 10T SAE 12 12T SAE 16 16T Bias Spring* bar (5 psi) bar (25 psi) bar (30 psi) bar (40 psi) bar (50 psi) bar (60 psi) bar (80 psi) Seals N Buna N (Std.) V Fluorocarbon HV High durometer fluorocarbon P Polyurethane
9 DIRECTIONAL VALVES CV16-20 Check Valve SYMBOLS USASI: ISO: PERFORMANCE (Cartridge Only) DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device. OPERATION The CV16-20 allows fl ow from ➀ to ➁, while blocking oil fl ow in the opposite direction. The cartridge has a fully guided poppet which is spring-biased to closed until suffi - cient pressure is applied at ➀ to open to ➁. FEATURES Hardened seat for long life and low leakage. Optional bias springs for back-pressure application fl exibility. Industry common cavity. RATINGS Operating Pressure: 240 bar (3500 psi) Proof Pressure: 350 bar (5075 psi) Flow: See Performance Chart Internal Leakage: 0.25 cc/minute (5 drops/minute) max. at 240 bar (3500 psi) Crack Pressure Defined: Gauge pressure evident at ➀ at 0.95 lpm (0.25 gpm) attained Standard Bias Springs at Crack: 0.35 bar (5 psi); 1.7 bar (25 psi); 4.1 bar (60 psi) Temperature: -40 to 120 C Filtration: See page Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cst (50 to 2000 sus); See Temperature and Oil Viscosity, page Installation: No restrictions; See page Cavity: VC16-2; See page Cavity Tool: CT16-2XX; See page Seal Kit: SK16-2X-T; See page /80 4.1/60 2.8/40 1.4/20 ➀to ➁: 0.34 bar/5 psi spring ; 1.72 bar/25 psi spring cst/150 ssu oil at 40 C
10 HYDRAFORCE CV16-20 DIMENSIONS MATERIALS Cartridge: Weight: 0.29 kg. (0.63 lbs.) Steel with hardened work surfaces. Zinc-plated exposed surfaces. Buna N O-rings and polyester elastomer back-ups standard. Standard Ported Body: Weight: 0.57 kg. (1.25 lbs.) Anodized highstrength 6061 T6 aluminum alloy, rated to 207 bar (3000 psi). Ductile iron bodies available; dimensions TO ORDER CV T Option* *Required for 100 or 150 psi spring. may differ. See page Porting Cartridge Only 0 SAE 12 12T SAE 16 16T 3/4 in. BSP* 6B 1 in. BSP* 8B T *BSP Body; U.K. Mfr. Only Bias Spring (Crack) bar (5 psi) bar (25 psi) bar (60 psi) bar (100 psi)* bar (150 psi)* *Requires T Option Seals N Buna N (Std.) V Fluorocarbon
PRESSURE COMPENSATORS TECNORD
PRESSURE COMPENSATORS 2-way, Compensating / Reducing Valves GPM PSI LPM BAR MODEL CAVITY PAGE 8 3500 30 245 DF-CP2 7/8 14 UNF 60 16 3500 60 245 QC-CP2 Special 62 Typical Schematic Typical application for
Cover headline. Cover subheadline. Check Valves
Check Valves Cover headline Direct and pilot operated check valve functions for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Cover subheadline EATON Screw-In Cartridge Valves E-VLSC-MC-E December
Pressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
Pressure control. Direct and pilot operated pressure control valves for applications up to 350 bar (5000 psi) and 300 L/min (80 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Pressure control Direct and pilot operated pressure control valves for applications up to 5 bar (5 psi) and L/min (8 USgpm) Pressure control PRSSUR CONTROLS...-4
Motion Controls Valve locator
Motion Controls Valve locator unctional Symbol C C Model Cavity low Rating Typical Pressure Page OCV standard L/min (USgpm) bar (psi) CE A9 (5) 7 (4) - CE A66 (8) 7 (4) - CEH A66 (8) 5 (5) - CE9 A6 9 ()
Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)
Vickers Cartridge Valves Load Controls Screw In Cartridge Valves Pressures to 50 bar (5000 psi) Flows to 90 l/min (50 USgpm) Rev. 2/99 722 Contents MODEL DESCRIPTION TYP. APPLICATION PRESSURE bar (psi)
Cartridge Valves Technical Information. Pressure Reducing, Quick Reference
Quick Reference Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page CP20-2 PRC 06 SDC10- NCS06/ Pressure Reducing, Non-Relieving, Direct Acting 40 l/min [10 US gal/min] 40 l/min
Double Pilot Operated Cartridge Check Valve, Size 8
Double Pilot Operated Cartridge Check Valve, Size 8 Q max = 7 l/min (19 gpm), p max = 35 bar (5 psi) pilot operated, two-stage, spring-closed cartridge-type poppet valve Compact design for cavity type
Pressure Reducing Valves Catalog Quick Reference
Quick Reference Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page 2 CP20-2 SDC0- Pressure Reducing, 20 bar PR - 5 PRC 06 NCS06/ Non-Relieving, Direct Acting [000 psi] 5 bar [4500
FIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to:
LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: Rated Static Burst to: psi kpa bar psi kpa bar Flow Range to: gpm lpm Features STYLE C STYLE D STYLE E in-tank filters are
Full Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
Electrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
directional control valve series cv691
directional control valve series cv691 Contents Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 9 Page 10 Page 11-12 General Information Technical Data Performance Curves Dimensions Relief Valve Advantages
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
F05MSV-N* CONTINENTAL HYDRAULICS FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK
CONTINENTAL HYDRAULICS F05MSV-N* FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400
Sandwich Valves. 1 Change in flow, temperature or fluid (SSU) rating will affect valve
Technical Information Series PRM General Description Series PRM reducing valves are used to regulate pressure, in one area of a circuit, below normal system pressure. This style valve is well suited to
3-Way Pressure-Reducing Cartridge, Size 2 4
-Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-2500/US Industrial Hydraulic Valves WARNING USR RSPONSIBILITY FAILUR OR IMPROPR
P.C. Flow Regulator Valve Series FR101. General Description
P.C. Flow Regulator Valve Series FR11 Compensated Flow Regulator Valve. NOTE: When used with a fixed displacement pump, pressure to the cartridge must be controlled by a relief valve located between the
Inverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
Directional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
Directional Control Valves Technical Information Model 1500
Single spool monoblock valve. 26.4 l/min [7 US gal/min] maximum flow. 138 bar [2 psi] maximum pressure with relief. 27 bar [3 psi] maximum pressure without relief. Garden tractors, mowers, utility equipment,
shutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
Pilot Operated Check Valves Catalog Quick Reference
Quick Reference Pilot to Open Model No. Description Flow* Pressure Page RPC NCS/3 Pilot Operated Check Valve, Pilot to Open.5 l/min [5. US gal/min] RPC NCS/3 35 l/min [9.3 US gal/min] CP5- SDC-3 3 l/min
Cartridge Valves Technical Information. Pilot operated check valves. Quick reference
Quick reference Pilot to Open Model No. Description Flow* Pressure Page P RPC 4 NCS4/ Pilot Operated Check Valve, Pilot to Open l/min [ US gal/min] RPC 6 NCS6/ 5 l/min [7 US gal/min] CP45- SDC- l/min RPC
BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
Pressure reducing valve, pilot operated, Model 3DR
RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features
Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.
Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum
Precision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB
Engineering & Manufacturing Solutions Specifications: MDC rated for -4 gpm (-151 lpm) MDCF rated for -3 gpm (-114 lpm) Rate for 3 PSI (27 bar) Port Sizes #16 SAE (1-5/16-12) all ports Weighs 16 lbs. (7.3
PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)
Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min
L6090 (LC04M-CBL) - L6095 (LC04M-CBD)
or 3 way pressure compensated flow regulators L69 (LC4M-CBL) - L695 (LC4M-CBD) RE 1833-4 Edition:.16 Replaces: 7.1 Size 4 Series Maximum operating pressure 31 bar (45 psi) Maximum flow (-way) 1 l/min (3.
Auxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998
Auxiliary valve Sequence valve, 3-way Catalogue 9129 8542-02 (GB) 9129 8542-06 (US) October 1998 Sequence valve, 3-way Applications The sequence valve is designed to open or close a hydraulic pilot signal
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional
PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE
LV LOADER DIRECTIONAL CONTROL VALVES INSTALLATION & USER GUIDE SPECIFICATIONS: 10 gpm (38 lpm) Nominal Capacity. Rated up to 4000 psi (275 bar). Port Sizes-Inlet/Outlet #8SAE (3/4-16). Work Ports #8SAE
Spin-On Filters SSF 24,25
Spin-On Filters SSF,5 Technical Specification Construction Die cast aluminium head Seals NBR (Buna-N ) Port connections Flow rate Working pressure Operating temperature By-pass valve Clogging indicators
Inverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
Pressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 10 DP Nominal size 10 Series 4X Maximum reduced pressure 210 bar (3050 PSI) Maximum flow 80 L/min
Proportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact
E 094 E 103 E 143 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 135 l/min / 35.7 gpm
Return Filters E 9 E E Tank top mounting Connection up to G / -6 SAE Nominal flow rate up to 5 l/min / 5.7 gpm Description Application In the return line circuits of hydraulic systems. Performance features
180 Series Rotary Shear Directional Control Valve
180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44
PTS1120TSJB PTS2120TSTSJB
Engineering & Manufacturing Solutions Specifications: 18 gpm (68.0 lpm) Nominal Capacity. Rated up to 3000 psi (207 bar). Port Sizes: -Inlet/Outlet #12 SAE. -Work Ports #10 SAE. 10 Micron Filtration Recommended.
P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES
52 000/110 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
Safety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1.1.1 Key to the circuit diagram Circuit diagram The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies
Series 1, 3 and 4 Cv = /8" and 1/4" Ported Manually Operated Valves. 3-way/2-position, 5-way/2-position, 5-way/3position
Cv =.52 -.73 Series, 3 and 4 Cv =.52.3 /8" and /4" Ported Manually Operated Valves 3-way/2-position, 5-way/2-position and 5-way/3-position Ports /8 and /4" NPTF The Series (/8 & /4", 3-way/2-position and
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
Safety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
PFM6, PFM6BD and PFM8 Portable Hydraulic Testers Installation & Operating Instructions
PFM6, PFM6BD and PFM8 Portable Hydraulic Testers 8635 Washington Avenue Racine, WI 53406 Tel: 800-433-5263 or 262-639-6770 Fax: 800-245-3569 or 262-639-2267 E-Mail: fl o-techsales@racinefed.com www.fl
L125 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE
L15 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE TAKE CONTROL Take control with Muncie Power Products L15 directional control valve. The L15 is constructed with high-grade, iron castings and nickel-plated
Manapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM
Catalog HY14-252/US Introduction Series C, CPO, F, PRD, PR, R anapak valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D3, D5 and D8 sandwich
Cooler-Bypass Thermostat Valve, Size 16
Cooler-Bypass hermostat Valve, Size Q max = l/min, p max = bar emperature-controlled, integral relief function, various pressure settings available Description emperature-dependent bypass control Integral
A050-1/2 INCH AIR OPERATED double DIAPHRAGM PUMP
A050 - /2 INCH AIR OPERATED double DIAPHRAGM PUMP A050 /2 Pump /2 Aluminum NPT or BSP Connections Zinc Plated Hardware Non-Metallic Muffler Suction Right / Discharge Right Standard Porting SPECIFICATIONS
HIGH PRESSURE FILTERS DFDK Series Inline Duplex Filters 4568 psi up to 90 gpm
DFDK Series Inline Duplex Filters 4568 psi up to 9 gpm Hydraulic Symbol DFDK QL L Ball Valve A DFDK QT T Ball Valve (sizes 33 or larger) A B B Features The DFDK Filters have a filter head of ductile iron
Safety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
E 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
D e s c r i p t i o n
MPS Series D e s c r i p t i o n The MPS spin-on filter series is a complete product range suitable, for both suction and return applications. Utilising spin-on canisters, the MPS series are quick and
E 084 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 80 l/min / 21.1 gpm
Return-Suction Filters E 08 Tank top mounting Connection up to G / -6 SE Nominal flow rate up to 80 l/min /. gpm Description pplication For operation in units with hydrostatic drives, when the return flow
Hydraulic Piston Accumulators
Hydraulic Installation All accumulators shipped from the factory will be pre-charged to a nominal pressure in order to seat the piston on the hydraulic cap. In this case the precharge will not be listed
Pressure relief valves
Pressure relief valves Type DV700 Features Direct operated valve High degree of pressure stability Safe operation Precise pressure adjustment Maximum pressure setting with lock nut Applications as cartridge
// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
OPERATION MANUAL. ALUMINUM Models 316 S.S. Models AIR-OPERATED DOUBLE DIAPHRAGM PUMPS
OPERATION MANUAL 2 METALLIC PUMP (BOLTED) PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF50 AIR-OPERATED DOUBLE DIAPHRAGM PUMPS ALUMINUM Models 316 S.S. Models A JDA Global Company CAUTIONS - READ FIRST CAUTION:
Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1
Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Size
Displacement 12, , Maximum flow rate (at 1450 rpm) bar.
00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment
INSTALLATION & MAINTENANCE INSTRUCTIONS - ORIGINAL VERSION AVK KNIFE GATE VALVES
1. INTRODUCTION The AVK knife gate valve is a unique, patented, bi-directional on-off valve that ensures a bubble-tight shut off. The valve is available with body of ductile iron and seat of nitrile, viton,
Safety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. Description 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
SDM to 8 sections monoblock valve D1WWDA02A
SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information
Installation Instructions, Pressure Regulator Series
Installation Instructions, Pressure Regulator 20517 Series Manual Model: 20517, L20517 Air motor Operated: F20517, LF20517 Hydraulic Motor Operated: G20517, LG20517 1. GENERAL ------------------------------------------------------------------------------
Vickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94
Vickers Flow Controls Flow Controls FN, F(C)G, FRG Released 6/94 685 Table of Contents FN03/06/10 Model Series Application Data...............................................................................
OMS Technical Information Technical data
Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250
VICKERS. SystemStak Valves. ISO ; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B
VICKERS SystemStak Valves ISO 441-3; NF-D3; 315 bar (45 psi); 6 L/min (15.7 USgpm) 1 G 227 uild a Compact, Cost-Effective, Reliable Hydraulic System with Vickers SystemStak Valves Reduces System Space
INDUSTRIAL EXCESS ESS FLOW VALVES
INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;
Safety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators. It complies with the relevant safety standards
PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure a secondary part of a hydraulic circuit. Pressure is mataed
VISI-FLO Sight Flow Indicators
Leading The Way in Fluid Handling Solutions Worldwide VISI-FLO Sight Flow Indicators Document No. H32199PA Revised: February, 2016 OPW Engineered Systems has been manufacturing sight flow indicators for
WK /2 WAY CARTRIDGE VALVE TYPE URZS 32 COVER FOR CARTRIDGE VALVE TYPE ULZS 32. Size 32 up to 42 MPa 700 dm 3 /min DESCRIPTION OF OPERATION
2/2 WAY CARTRIDGE VALVE TYPE URZS 32 COVER FOR CARTRIDGE VALVE TYPE ULZS 32 Size 32 up to 42 MPa 700 dm 3 /min WK 490 907 04.1999r. 2/2 way cartridge valve type URZS 32 can be used to build hydraulic systems
OPERATION MANUAL AIR-OPERATED DOUBLE DIAPHRAGM PUMPS 1.5 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF40 CLAMPED. A JDA Global Company
OPERATION MANUAL 1.5 POLYPROPYLENE PUMP PWR-FLO TM AIR DISTRIBUTION SYSTEM NPF40 CLAMPED AIR-OPERATED DOUBLE DIAPHRAGM PUMPS A JDA Global Company CAUTIONS - READ FIRST CAUTION: Do not apply compressed
Standard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
Inline Swivels Switch Your Swivel!
Inline Swivels Switch Your Swivel! HOW TO ORDER BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SERIES ( ) THREAD SIZE MULTIPLES OF 100 FOR N.P.T.F. MULTIPLES OF 16 FOR J.I.C., O.R.B.
1004D3/1005E3 API Bottom Loading Coupler. Installation, Operation & Maintenance (IOM) Manual
Document No. H32094PA, Rev. 0 Issue Date: September 4, 2014 Supersedes: March 1, 2013 1004D3/1005E3 API Bottom Loading Coupler Installation, Operation & Maintenance (IOM) Manual 2726 Henkle Drive Lebanon,
SystemStak Valves. ISO4401 Size 02
SystemStak Valves ISO441 Size 2 Reduce System Space Requirements SystemStak valves make compact hydraulic systems in which specific function valves are sandwich mounted between a directional valve and
Leak-Free Load-Control Valve SAE ½ psi flange
Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control
OMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes
VSD03M DIRECTIONAL CONTROL VALVES
NFPA SIZE D03 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e.
Two-stage valve type NE
Two-stage valve type NE Product documentation Operating pressure pmax: Flow rate Qmax: 700 bar (High pressure) 80 bar (Low pressure) 25 lpm (High pressure) 180 lpm (Low pressure) D 7161 03-2017-1.0 by
Diaphragm Accumulators
Diaphragm Accumulators HYDAC Diaphragm Accumulators Index Page 1. Description 3 Introduction 3 Construction 3 2. Applications 4 3. Technical Data 6 Operation 6 Technical Specifications 6 Temperature Effect
DANFLO Control Valves 400 Series Model 20
DANFLO Control Valves 400 Series Model 20 Back Pressure/Pressure Relief The DANFLO Model 20 is a pilot operated valve suitable for use in gas or liquid facilities and requires no outside power for operation.
HIGH-PRESSURE RELIEF VALVES
HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range
Desiccant Air Breathers DBE. Section 3: TNK SCHROEDER INDUSTRIES ACCESSORIES 21
Desiccant Air Breathers DBE Section 3: SCHROEDER INDUSTRIES ACCESSORIES 21 Reservoir Accessories A hydraulic systems reservoir can play a significant role in the ingression of contamination into the system.
Simplified Digital Hydraulic Testers Operating Manual. Oil Solutions. DHC DHT HP
Webtec Products Limited Simplified Digital Hydraulic Testers Oil Solutions sales@oilsolutions.com.au Phone 0421 336 009 Fax 03 9012 4332 DHC 51-151 DHT 401-751 - 751 HP www.webtec.co.uk www.oilsolutions.com.au
2-way flow control valve Model 2FRM 6
R 28 6/0.98 Replaces R 28 62/05.94 R 28 6/06.98 2-way flow control valve Model 2FRM 6 Nominal size 6 Series X Maximum operating pressure 4569 SI (5 bar) ) Maximum flow 8.45 GM (2 L/min) H//D 585/97 + H//D
HYDRAULIC MOTORS MV APPLICATION GENERAL
HYDRAULIC V APPLICAION» Conveyors» etal working machines» Agriculture machines» Road building machines» ining machinery» Food industries» Special vehicles» Plastic and rubber machinery etc. CONENS Specification
1200 Series Pressure Regulators
SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of
4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)
4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31
2 I All-Flo Pump Co.
2 I All-Flo Pump Co. 3I All-Flo Pump Co. Model Designation Matrix Pump Dimensions A B C D F H I J K L P300 18.90" 22.83" 31.50" 3.94" 15.28" 27.17" 1.57" 2.95" 15.55" 19.49" (480 mm) (580 mm) (800 mm)
Size 10 (D05) p max 320 bar (4600 PSI) Technical Features. Technical Data. Port dimensions ZB10A(B) SMT_0019 ZB K -
ase late with with ressure Relief Valve for Serial lates ssemblies Z0 Size 0 (D05) p max 320 bar (4600 SI) echnical Features ank cover mounted base manifold for hydraulic power packs which require one