CDP-100S Pressure Type Level Transmitter

Transcription

1 CDP SERIES CDI TECH CO.,LTD. Suite 706 World Merdian Venture Center II, 46-5, Kasan-Dong, Kumchun-Gu, Seoul, Korea Phone : F : cdi@cdinstech.com Web :

2 GENERL DESCRIPTION CDP-00 series submersible or tank level pressure transmitter has been developed for measuring and monitoring water or liquid level in industrial and communal hydrostatic applications. The bluilt-in piezoresistive silicon measuring element designed offers great accuracy, excellent long term stability and very low temperature drift. The compact transmitter design allows versatile applications and are suitable for measuring dynamic and static pressure. The level pressure transmitters are available for absolute or relative pressure with wire current output and can be used for wide ranges of application in process control, level measurement of open weirs or stilling wells, tanks farms and paper liquors. It is designed as a general industrial level pressure transmitter with wide variety of available options to meet specific application requirements and constructed of water proofed. FETURE & PPLICTIONS FETURE Rugged Construction and Excellent Cable High ccuracy Low Temperature Drift Excellent Long Term Drift Measuring Range from to 0 kg.f/cm² Gauge Pressure Measuring Range from 0- to 0kg.f/cm² Gauge or bsolute Pressure Shock and Vibration Resistants Water Proofed Construction PPLICTIONS Geophyusical pplications Level Measurement in Storage Tank Underground Water Monitoring in Both Communal and Industrial reas Water and Waste Water Treatment Water Supplies and Reservoirs Well and Borehole Probe Marine Research

3 TECHNICL SPECIFICTIONS Model Pressure range Overload Output signal Excitation voltage Influence of excitation voltage Media Power ripplel Load resistance Reverse polarity protection Shock resistance ccuracy Linearity Repeatability Hysteresis Stability of sensitivity Stability of zero Cutoff frequency (-3dB) Reference temperature Thermal sensitivity shift Thermal zero shift Long-term stability Temperature compensated Operating temperature range Pressure nose cap Material of wetted plug diaphragm housing gasket O-ring external cable cover venting tube Wire construction Cable dia-meter Optionsl kgf/cm² gauge kgf/cm² absolute 3 x FS without damage 4-0m DC Current output -5V DC Voltage output available 8-36V DC less than 0.0% FSO/V Water, oil and other liquids less than 500mV P-P 500Ù at 4V DC Yes less than 0G ±0.% FSO 0.00% of span, BFSL 0.05% of span, BFSL 0.00% of span, BFSL 0.00% of span, BFSL 0.300% of span, BFSL 0...> 5kHz 35 C 0.500% of span, BFSL 0.500% of span, BFSL 0.300% of span over 6 months 0-8 C -40 C to 5 C Com (standard) Filter L SS Viton Poly Urethan Teflon 6 wires, venting tube, sheilded pprox. Ö7.5mm Terminal head with flangel Local indicator Explosion proofed terminal box

4 INSTLLTION Each transmitter is subjected to an extended test program where zero and full scale output are individually adjusted as to guarantee the interchangeability of the transmitters. dditional calibration will not be necessary due to the excellent sensor characteristics. Whenever installing submersible level pressure transmitter, the following conditions should be considered ; - Select a proper nose cap according to the application. - Support cable should be installed when the cable length over 50m. - The venting hole should be opened to the atmosphere when applying gauge pressure sensor. DIMENSION

5 SYSTEM CONNECTION FOR -WIRE TRNSMITTER ORDERING CODE MODEL Pressure reference Measuring range Output signal ccuracy Nose cap Materials of housing Cable length Options Gauge pressure bsolute pressure 0-600mmHO 0-000mmHO 0-000mmHO 0- kgf/cm² 0- kgf/cm² 0-3 kgf/cm² 0-5 kgf/cm² 0-0 kgf/cm² Special calibration on request 4-0m Other signals on request ±0.5% FSO Corn ( Standard ) Filter Weight Other caps on request Stainless steel 304 (standard) Other materials on request 0m (standard ) 0m Extension cable on request Terminal head Local indicator Flange B C 3 B