UKAS Accredited Electrical & Mechanical Calibration Services (Laboratory and On-site)
|
|
- Jessie Ross
- 5 years ago
- Views:
Transcription
1 0720 UKAS Accredited Electrical & Mechanical Calibration Services (Laboratory and On-site) Aerospace/Defence Rail Automotive Packaging Pharmaceutical/Medical Catering Petrochemical/Oil & Gas
2 Rhopoint Metrology Ltd is a UKAS Accredited Calibration Laboratory (0720) providing an impressive range of calibration services at our permanent laboratory in the West Midlands and South Coast together with electrical and dimensional calibrations at our clients' sites where required. Our extensive range of calibration services includes dimensional, mechanical, electrical, pressure, mass and torque.» UKAS calibration service on all instruments. (see schedule 0720 for accreditation)» On-site UKAS calibration service» Full calibration system management» Guaranteed maximum turnaround time of five days» 48 hour Goldtrack Service» Online certification» Emergency response» Calibration consultancy service» Electrical and mechanical equipment repair and refurbishment facility» Collection and delivery provided by our own fleet of vehicles.
3 Accreditation Summary (see full UKAS schedule 0720 for detailed accreditation) DIMENSIONAL Angle plates, box angle plates Balls Bench centres Comparators Cylindrical setting standards Dial gauges, lever & plunger Feeler gauges Gauge blocks (by comparison) Height gauges, electronic Length gauges, flat & spherical ended Levels, spirit & electronic Luer gauges Micrometers all types Micrometers, height setting riser blocks Orifice plates Parallels, engineers Penetration needles and cones Plug Gauges Screw Gauges Sine bars, centres, tables Squares, blade, block & Cylindrical Steel rules, engineers Straightedges Surface plates & tables Surface texture Thread measuring equipment Transducers, displacement Vee blocks Vernier gauges UKAS Accredited Electrical & Mechanical Calibration Services (Laboratory and On-site) Aerospace/Defence Rail Automotive Packaging Pharmaceutical/Medical Catering Petrochemical/Oil & Gas
4 ELECTRIC AL Ammeters, ac, dc Bridges and similar instruments, resistance Calibrators, multimeter Frequency counters Loop testers Multimeters, analogue & digital Oscilloscopes, deflection coefficients only Portable appliance testers Power supply units Resistance boxes Resistors, ac, dc Shunts Tachometers, optical Temperature indicators, electrical calibration Timers Voltage dividers and volt ratio boxes, dc Voltage standards, ac, dc Voltmeters, ac, dc MASS Weighing machines (non-automatic) Individual masses to Class M2 up to 500Kg PRESSURE Gas absolute, devices with an electrical output Gas absolute, indicating instruments Dead-weight testers, pressure equivalent Hydraulic gauge, devices with an electrical output TORQUE Hand torque drivers and wrenches up to 1500lb/ft w w w. r h o p o i n t m e t r o l o g y. c o. u k
5 We offer calibration, training, repair & refurbishment facilities covering a wide range of dimensional, electrical, pressure, torque and mass, including supply of all types of metrology equipment. Training Rhopoint Metrology, calibration and inspection training courses are available in-house, tailored to your specific requirements. Please contact us to discuss how we may be able to build a training package to suit your needs. Calibration Rhopoint Metrology offer UKAS onsite calibration of Surface Plates/Tables & optical profile projectors. We also provide many other types of onsite calibration service with certification traceable to the National Physical Laboratory.
6 Rhopoint Metrology recognises that our customers peace of mind is of paramount importance,we therefore offer a complete calibration management service to cover all of your requirements. Our team of qualified and experienced engineers offer a consistently high level of service available at your premises or in our well-equipped laboratories. Rhopoint Metrology Limited, Eurolab House, Unit 10 Valepits Road, Garretts Green Industrial Estate, Birmingham B33 0TD. UK T +44 (0) F +44 (0) sales@rhopointmetrology.co.uk Rhopoint Metrology Limited is a member of the Rhopoint Group
K V A L I F I K. Our accreditation number: NAH /2015. Valid to:
KVALIFIK Ltd. has founded in 1991. In 1993 our calibration laboratory has get the accredited status and we have calibrated standards for the generally used physical parameters. Our standards are traceable
More information2014 Programme of Training Courses in Measurement & Calibration
2014 Programme of Training Courses in Measurement & Calibration NSAI National Metrology Laboratory offers public courses to help individuals gain the skills that they require in the field of Measurement
More informationAccreditation programme for calibration laboratories NAR KL Edition 1
Accreditation programme for calibration laboratories NAR-01-02-KL Edition 1 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation: Consistency of content reviewed by: Legal
More informationGMC-I Service GmbH Calibration Center
2016 GMC-I Service GmbH Calibration Center DAkkS, ISO & Factorycalibration www.gmci-service.com From spare parts, reparation, rental service, maintenance of industrial health and safety standards, calibration
More informationMET-101 Introduction to Metrology
Pasig city Tel: 654-13-42 MET-101 Introduction to Metrology This 2-day course offers a basic introduction into Metrology, meant for people who are working in calibration and testing labs, maintenance services
More informationtradition. knowledge. responsibility. CALIBRATION OF ELECTRICAL MEASUREMENT EQUIPMENT CALIBRATION LABORATORY
tradition. knowledge. responsibility. CALIBRATION OF ELECTRICAL MEASUREMENT EQUIPMENT CALIBRATION LABORATORY www.koncar-institut.com Calibration of electrical measurement equipment - Calibration laboratory
More informationMETROLOGY LAB. I DEVICES BASED ON VERNIER SCALE
METROLOGY LAB. I DEVICES BASED ON VERNIER SCALE Indirect Measurement; two balls 2 Lab6: Roundness Test 12/1/2017 Indirect Measurement; four balls 3 Lab6: Roundness Test 12/1/2017 Angle measurement using
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAPSTONE CALIBRATION 7016 Baker Blvd Richland Hills, TX 76118 Jon T. Cappa Phone: 817 284 2707 CALIBRATION Valid To: January 31, 2020
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ROBB PRECISION TOOL SERVICES, INC. 2100 196th St SW, Suite 144 Lynnwood, WA 98036 Robert Robb Phone: 425 672
More informationEQUIPMENT RENTAL AND CALIBRATION SERVICES
EQUIPMENT RENTAL AND CALIBRATION SERVICES The Complete Solution At Proserv, we are committed to delivering an innovative range of solutions and services that enhance operational efficiency and productivity
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 LEDFORD GAGE LAB, INC. 227 Industrial Dr. Mulvane, KS 67110 Blaine Johnson Phone: 316 777 9300 CALIBRATION Valid To: December 31, 2019
More informationTG GUIDELINES CONCERNING CALIBRATION INTERVALS AND RECALIBRATION
GUIDELINES CONCERNING CALIBRATION INTERVALS AND RECALIBRATION Approved By: Senior Manager: Mpho Phaloane Revised By: Field Manager: Neville Tayler Date of Approval: 2015-08-26 Date of Implementation: 2015-08-26
More informationPressure Measurements
ME 22.302 Mechanical Lab I Pressure Measurements Dr. Peter Avitabile University of Massachusetts Lowell Pressure - 122601-1 Copyright 2001 A transducer is a device that converts some mechanical quantity
More informationGeneral Accreditation Guidance. General Equipment - Calibration and Checks, General Equipment Table
General Accreditation Guidance General Equipment - and Checks, General Equipment Table January 2018 Copyright National Association of Testing Authorities, Australia 2013 This publication is protected by
More informationSEMEM3-78 Testing and calibrating instrumentation and control equipment and circuits
Testing and calibrating instrumentation and control equipment and Overview This unit identifies the competences you need to carry out tests and calibration of instrumentation and control equipment and,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z TROXLER ELECTRONICS LABORATORIES, INC. James Pratt Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TROXLER ELECTRONICS LABORATORIES, INC. James Pratt Phone: 919 314 2707 CALIBRATION Valid To: See Footnote 5 Certificate Number: 3260.01
More informationSEMETS3-17 Checking and calibrating mechanical inspection equipment
Checking and calibrating mechanical inspection equipment Overview This unit identifies the competences you need to carry out calibration and setting activities on mechanical inspection equipment, in accordance
More informationDead-weight tester High-pressure version Model CPB3800HP
Calibration Dead-weight tester High-pressure version Model CPB3800HP WIKA data sheet CT 31.07 for further approvals see page 5 Applications Primary standard for calibrating the pressure scale in a hydraulic
More informationCONTENTS 1. INTRODUCTION DESCRIPTION OF TEST SAMPLE TEST RIG GENERAL ARRANGEMENT TEST SEQUENCE...7
Page 2 of 22 CONTENTS 1. INTRODUCTION...3 2. DESCRIPTION OF TEST SAMPLE...4 3. TEST RIG GENERAL ARRANGEMENT...6 4. TEST SEQUENCE...7 5. SUMMARY AND CLASSIFICATION OF TEST RESULTS...8 6. WATERTIGHTNESS
More informationI N N O V A T I O N C O N T I N U E S... International Patent Filed in 45 Leading Countries
I N N O V A T I O N C O N T I N U E S... Quick Check International Patent Filed in 45 Leading Countries World's First Single Piece Multi-Function Check Standard for Calibration or Verification of Various
More informationCertified Accuracy. Ring Force Gauge. Models and Capacities Available. Design and Principle of Operation
Certified Accuracy Ring Force Gauge The accurate measurement of mechanical forces is required in hundreds of applications from a simple weighing procedure to the calibration of testing machines and load
More informationHydraulic pressure balance Model CPB5800
Calibration technology Hydraulic pressure balance Model CPB5800 WIKA data sheet CT 31.11 for further approvals see page 8 Applications Primary standard for calibrating the pressure scale in a hydraulic
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 FIRSTENERGY BETA LABORATORY 6670 Beta Drive Mayfield Village, OH 44143 William Coll Phone: 440 604 9889 CALIBRATION Valid To: November
More informationExercise 3. Power Versus Wind Speed EXERCISE OBJECTIVE DISCUSSION OUTLINE. Air density DISCUSSION
Exercise 3 Power Versus Wind Speed EXERCISE OBJECTIVE When you have completed this exercise, you will know how to calculate the power contained in the wind, and how wind power varies with wind speed. You
More informationFluid Machinery Introduction to the laboratory measurements
Fluid Machinery Introduction to the laboratory measurements Csaba H s (csaba.hos@hds.bme.hu) Ferenc Hegedus (hegedusf@hds.bme.hu) February 21, 2014 1 Requirements related to the measurement part of the
More informationUKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide
ABB MEASUREMENT & ANALYTICS PRODUCT GUIDE PG/SMD140 EN REV. B UKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide Measurement made easy UKAS calibration laboratory
More informationSEMEEE3-34 Carrying out functional tests on electrical equipment
Overview This standard identifies the competences you need to carry out functional tests on electrical equipment, in accordance with approved procedures. You will be required to carry out pre-test inspections
More informationGas Network Craftsperson
Gas Network Craftsperson Unit EIAU016 Carrying out Fault Diagnosis on Electrical Equipment and Circuits This assessment specification has been developed as part of the network maintenance craftsperson
More informationMODEL WEIGH MODULE
MODEL 65082 WEIGH MODULE INSTALLATION & OPERATING MANUAL P.O. Box 775 - Farmington, NH 03835 Tel: 603-755-3885 email: cands_nh@msn.com www.candscontrols.com Model 65023 Cantilever Beam Transducer Nickel-Plated
More informationPressure calibration equipment
Pressure calibration equipment Contents Introduction 2 Oil operated deadweight testers DOS0015 (accuracy 0.015% of reading) 5 DOS0015 Dual Piston (accuracy 0.015% of reading) 6 DOS001 (accuracy 0.01% of
More informationGEMS SENSORS & CONTROLS
GEMS SENSORS & CONTROLS OPERATING & INSTALLATION INSTRUCTIONS 31XX / 32XX SERIES PLEASE READ CAREFULLY BEFORE INSTALLING Part Number: 560550-0076 Issue: E INTRODUCTION Series 3100/3200 high output pressure
More informationSummary of the MRA LPG Codes of Practice
Summary of the MRA LPG Codes of Practice COP A1 DESIGN and INSTALLATION Code COP A1 deals with above ground installations where LPG is stored under pressure at ambient temperatures in fixed vessels larger
More informationQi Litre Ultrasonic Cleaner
Qi-300 17Litre Ultrasonic Cleaner Ultrawave s Qi-Series are robust and reliable, delivering outstanding cleaning performance in a wide range of industries. From precision, pharmaceutical and medical device
More informationThe definition of a competent person given in the Electricity at Work Regulations 1989 (EWR) is as follows:
Electrical Safety Guidance Note 1 - General Guidance Competent Person The definition of a competent person given in the Electricity at Work Regulations 1989 (EWR) is as follows: "A person in the possession
More informationDigital Pressure Gauge Main features: Data Sheet: BIT02B.417.R6.EN COVER on request
Data Sheet: BIT02B.417.R6.EN www.ntt.dk Digital Pressure Gauge COVER on request Bit02B digital gauge series is proposed as the cheaper version of LabDMM but guarantees all the functional characteristics
More informationPneumatic dead-weight tester Model CPB3500
Calibration technology Pneumatic dead-weight tester Model CPB3500 WIKA data sheet CT 31.22 Applications Primary standard for calibrating the scale in a pneumatic range from -1... 120 bar / -14.5... 1,600
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CORPORATE CONSULTING, SERVICE, & INSTRUMENTS, INC. University Park, 221 Beaver Street Akron, OH 44304 Michael Kent Warner Phone: 330 376 3600 CALIBRATION Valid
More informationPressure is our Business
Pressure is our Business Count on gauges and calibrators that perform Wherever you work Reduce Measurement Error Protect against diminished accuracy from environmental conditions, accidental damage, and
More informationValve test benches. Systems overview
Valve test benches Systems overview About us In the past few years WIKA has successfully integrated renowned manufacturers of calibration equipment into the group. With these established brands within
More informationDPC-30 DPC-100. Reference Manual
DPC-30 DPC-100 Reference Manual 1. Introduction 1.1 Description The Martel DPC Digital Pneumatic Calibrator improves upon traditional dial gauge pneumatic calibrators. The Martel DPC improves accuracy,
More informationMedium Heavy Vehicle Safety and Foundation 1
Medium Heavy Vehicle Safety and Foundation Student/intern information: Name Class Vehicle used for this activity: Year Make Model Odometer VIN Learning Objective / Task General Safety Identify tools and
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 THE L.S. STARRETT COMPANY 121 Crescent Street Athol, MA 01331 Harold J. Bacon Phone: 978 249 3551 CALIBRATION Valid To: October 31,
More informationCRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY Approved By: Chief Executive Officer: Ron Josias Senior Manager: Mpho Phaloane Revised By: Specialist Technical Committee Date of
More informationGeneral Accreditation Guidance. User checks and maintenance of laboratory balances
General Accreditation Guidance User checks and maintenance of laboratory balances January 2018 Copyright National Association of Testing Authorities, Australia 2010 All intellectual property rights in
More informationDENSITY CALIBRATIONS AT MIKES. Heikki Kajastie, Jorma Manninen and Kari Riski Centre for Metrology and Accreditation (MIKES) ABSTRACT
DENSITY CALIBRATIONS AT MIKES Heikki Kajastie, Jorma Manninen and Kari Riski Centre for Metrology and Accreditation (MIKES) ABSTRACT The density measurement instruments at MIKES will be described. Also
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Antibus Scales & Systems, Inc. 1919 Research
More informationLow Profile Load Cells
Low Profile Load Cells World Leading Performance With Improved Linearity, Hysteresis, Creep & Thermal Performance Introducing Interface s Enhanced Low Profile Load Cell Interface Inc. pioneered the first
More informationSpecification For Water Meters. Pr10068
Specification For Water Meters Pr10068 Documents Details This document is only valid on the day it was printed. Version Review Revision Date issued Reviewed by Approved by Date approved Revision type 0.1
More informationOD plug gauge. for bores and internal profiles from dia. 2,5 mm. OD plug gauge in open design. Special designs Accessories. OD plug gauge for various
OD plug gauge for various bore diameters Cross sleeve Cross sleeve with runners OD plug gauge for bores and internal profiles from dia. 2,5 300 Oskar Schwenk GmbH & Co. Esslinger Straße 84 70736 Fellbach
More informationEquipment Accuracy / Selection
Revision 5.0: Included the PPP program for clarification. Revision 6.0: Update references for CTL PDSH 251B to CTL DSH 251E" Added leakage current tolerances for values above 5KHz For Client Labs Purpose
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Reynosa, Tamaulipas, México CP. 88650 (Hereinafter
More informationSEMEM4-40 Carrying out the testing and calibration of instrumentation control equipment and circuits
Carrying out the testing and calibration of instrumentation control Overview This standard identifies the competences you need to lead and carry out tests and calibration of instrumentation and control,
More informationPULSAR 5000 SERIES OPERATING & INSTALLATION INSTRUCTIONS SERIES 5000 PLEASE READ CAREFULLY BEFORE INSTALLING
PULSAR 5000 SERIES OPERATING & INSTALLATION INSTRUCTIONS SERIES 5000 PLEASE READ CAREFULLY BEFORE INSTALLING Please Note: Ranges above 500mbar are designed and manufactured in accordance with sound engineering
More informationMounting instructions. Strain transducer SLB-700A. B 26.SLB700A.10 e
Mounting instructions Strain transducer SLB-700A B 26.SLB700A.10 e SLB700A 3 Contents Page Safety instructions.............................................. 4 1 Applications..................................................
More informationAccreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs)
RG 3 Edition 4 December 2018 Accreditation for In-Service Inspection of Transportable Pressure Receptacles (TPRs) RG 3 / Edition: 4 Page 1 of 8 Contents 1. Introduction 2 2. Scope - Inspection Services
More informationThe Univentor 1250 Anaesthesia Unit
THE UNIVENTOR 1200/1250 ANAESTHESIA UNIT The Univentor 1250 Anaesthesia Unit TABLE OF CONTENTS EDITION 1 Section 1 - WARRANTY & SERVICE 1.1. WARRANTY 2 1.2. DAMAGED SHIPMENTS 2 1.3. SERVICE 2 Section 2
More informationBT 800-OX Operating Manual
BT 800-OX Operating Manual DRUCK & TEMPERATUR Leitenberger GmbH Bahnhofstr. 33 72138 Kirchentellinsfurt GERMANY Tel.: +49-7121-90920-0 Fax: +49-7121-90920-99 www.druck-temperatur.de www.lr-cal.com INSTRUCTION
More information_ pressure transducers. User Manual
_ pressure transducers User Manual summary introduction DescriPTION preliminary checks Installation taking measurements data management Troubleshooting maintenance Appendix 1 Page 4 Page 5 Page 6 Page
More informationSINGLE VALVE WITH LOW-FLOW BYPASS
CONTROL VALVES Pressure Reducing Valve Sizing Guide Sizing pilot operated reducing valves is not a complicated process. It starts with determining requirements and following these guidelines in valve size
More informationHydraulic comparison test pump Models CPP1000-X, CPP1600-X
Calibration Hydraulic comparison test pump Models CPP1000-X, CPP1600-X WIKA data sheet CT 91.12 for further approvals see page 2 Applications Calibration service companies and service industry Maintenance
More informationSupplementary Certificate of Approval. No S433
12 Lyonpark Road, North Ryde NSW 2113 Australia Supplementary Certificate of Approval No S433 Issued under Regulation 60 of the National Measurement Regulations 1999 This is to certify that an approval
More informationTest pumps. Pressure sources. Good reasons for proper and reliable calibration
Test pumps Pressure is one of the most commonly measured quantities in engineering, which is why exact and reliable pressure measurement is especially important. However, the characteristics of the even
More informationRequirements and Methods for Calibration of Equipment in Clinical Laboratories. NK Chan (HKRCBTS) 24 August 2007
Requirements and Methods for Calibration of Equipment in Clinical Laboratories NK Chan (HKRCBTS) 24 August 2007 1 Contents Basic Requirements of Equipment Calibration Calibration of Electronic Balance
More informationHatchery Tips from Jamesway s Technical Team. Essential Hatchery Tools by Phillip Perry
Hatchery Tips from Jamesway s Technical Team Essential Hatchery Tools by Phillip Perry HATCHERY TOOLS FOR A JAMESWAY HATCHERY by Phillip Perry, Consultant and Technical Advisor Phillip is a former hatchery
More informationTORQUE WRENCHES CONTENTS MANUAL TORQUE MULTIPLIERS POWERED TORQUE MULTIPLIERS TORQUE MEASUREMENT INSTRUMENTS HYDRAULIC TOOL CALIBRATION FIXTURES
PRODUCT LIST 017 LEGEND CONTENTS TORQUE WRENCHES CONTENTS Accuracy (%) Ratchet Digital Display Single Scale Torque Handle IP Rated Dual Scale Fixed Case Included Multi Scale Calibration Certificate Adjustment
More informationTT TORQUE WRENCHES. TTi TORQUE WRENCHES. For no-nonsense torqueing - comfortable, accurate and easy to use
TT TORQUE WRENCHES TTi TORQUE WRENCHES 2 RATCHET ADJUSTABLE - DUAL SCALE 13285 TTi20, ¼", 1-20 N m, 10-180 lbf in 13640 TTi20, 3 8", 1-20 N m, 10-180 lbf in 13658 TTi50, 3 8", 8-50 N m, 6-35 lbf ft 13659
More informationSIKA Ba_ODWT15_en 05/2018. Operating manual for oil deadweight tester 0.015% accuracy ODWT15
SIKA Ba_ODWT15_en 05/2018 Operating manual for oil deadweight tester 0.015% accuracy ODWT15 Table of Contents 1 introduction...1 1.1 general product description... 1 1.2 operating principle... 1 2 general
More informationKENYA ACCREDITATION SERVICE
KENAS-GUD-016 01 16/03/2013 16 / 04/2013 GUD Page 1 of 18 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Name Job Title / Role
More informationAUTOMATIC HOSE TEST UNIT, TYPE SPU
VALVES AND FITTINGS UP TO 14,000 BAR TEST AND CONTROL EQUIPMENT H IGH PRESSURE TECHNOLOGY AUTOMATIC HOSE TEST UNIT, TYPE SPU Pressure range from 1 up to 10,000 bar User-friendly touch panel operation HIGH-PRESSURE
More informationRigel 601 CHECKBOX. Instruction Manual. 348A551 Issue 2.0. April Seaward Electronic Ltd. Issue 2.0
Rigel 601 CHECKBOX Instruction Manual 348A551 Issue 2.0 April 2006 2006 Seaward Electronic Ltd. Issue 2.0 Limited Warranty & Limitation of Liability Rigel Medical guarantees this product for a period of
More informationGFM. Typical Aluminum GFM Mass Flow Meter NIST MASS FLOW METERS. Principles of Operation. Design Features
Design Features Rigid metallic construction. Maximum pressure of 1000 psig (70 bars). Leak integrity 1 x 10-7 of helium. NIST traceable certification. Built-in tiltable LCD readout. 0-5 Vdc and 4-20 ma
More informationPostal Service Practice Exam Sample Exam # 5 Exam # 955E
Postal Service Practice Exam Sample Exam # 5 Exam # 955E Copyright 2017 All rights reserved Customer Support: support@postaljobssourcewcs.com About Exam 955E This exam is only used for a few positions,
More informationTechnical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media
www.kem-kueppers.com Technical Datasheet ZHA Series Gear Flow Meters Aluminum Version with ball bearing for lubricating media Certified zertifiziert according gemäß to DIN DIN EN EN ISO ISO 9001 9001 2
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PRECISION MEASURING CORP Groesbeck Hwy. Fraser, MI Robert Meyer Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PRECISION MEASURING CORP. 33250 Groesbeck Hwy. Fraser, MI 48026 Robert Meyer Phone: 586 293 4420 CALIBRATION Valid To: September 30, 2019 Certificate Number:
More informationPRESCODEM400, PRESCODEM400/220
Sinorix PRESCODEM400, PRESCODEM400/220 Sinorix CDT-V, Sinorix H2O Jet Removable contact pressure gauge with electrical connector Allows to visually check the pressure of the cylinder on which it is mounted
More informationUser Manual Pressure Calibration System C and Hydraulic Pressure Pump Models T-620/T-620H Copyright 2008 AMETEK Denmark A/S
User Manual Pressure Calibration System C and Hydraulic Pressure Pump Models T-620/T-620H Copyright 2008 AMETEK Denmark A/S About this manual. The structure of the manual This user manual is aimed at users
More informationTHE UNIVENTOR 400 ANAESTHESIA UNIT
THE UNIVENTOR 400 ANAESTHESIA UNIT TABLE OF CONTENTS EDITION 3 Section 1 - WARRANTY & SERVICE 1.1. WARRANTY 2 1.2. DAMAGED SHIPMENTS 2 1.3. SERVICE 2 Section 2 - INTRODUCTION 2.1. INTRODUCTION 3 Section
More informationH&D Fitzgerald Pressure Pyknometry System Mark 5
Setting the standard in density H&D Fitzgerald Pressure Pyknometry System Mark 5 Simple Portable Traceable Remember! Your density meter is only as good as its last calibration! A fundamental calibration
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited CAL-RITE CORPORATION Naperville, IL for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International
More informationTHE PRESSURE SIGNAL CALIBRATION TECHNOLOGY OF THE COMPREHENSIVE TEST
THE PRESSURE SIGNAL CALIBRATION TECHNOLOGY OF THE COMPREHENSIVE TEST SYSTEM Yixiong Xu Mechatronic Engineering, Shanghai University of Engineering Science, Shanghai, China ABSTRACT The pressure signal
More informationwww.ricelake.com/condec 888-295-8475 UPC5000 PRESSURE CALIBRATION STANDARD Designed for calibrating transmitters, transducers, gauges and other pressure sensitive devices onsite, the portable UPC5000 is
More informationGas Network Craftsperson
Gas Network Craftsperson Unit EIAU06 Maintaining Instrumentation and Control Equipment Circuits This assessment specification has been developed as part of the network maintenance craftsperson standard
More informationSolenoid gas valve. The solenoid gas valve is also applicable as a main gas valve Pilot gas valve for forced draft burners
7 634 VGS1... with AGA67 connector VGS2... with AGA67 connector Solenoid gas valve VGS The solenoid gas valve is also applicable as a main gas valve Pilot gas valve for forced draft burners The VGS and
More informationMeuangvang Development Co.LTD Standard Working Procedure 058 Use of Hydraulic Torqueing Devices
1. Application To provide a standard work procedure for as required in accordance with Meuangvang Development Co Ltd Safety Management Program 2. Revision Schedule Rev # Old Section Ref New Section Ref
More informationAir Track Rail Air Track Rail, Basic Equipment
R Air Track Rail Air Track Rail, Basic Equipment 11202.77 Operating Instructions 1 PURPOSE AND CHARACTERISTICS With its extremely low friction the set of equipment, Air Track Rail 11202.77, is ideally
More informationuser leaflet GAUGING TRANSDUCERS
user leaflet Solartron Metrology Gauging Transducers are high precision measurement probes intended for all gauging applications demanding high accuracy and a high degree of repeatability. The one piece
More informationTS1. Ultrasonic Tank Sender. Installation and Operating Instructions. For TS1 Firmware v3.8. Page 1 INST-TS1-V13 18/11/10
TS1 Ultrasonic Tank Sender Installation and Operating Instructions For TS1 Firmware v3.8 Page 1 Table of Contents 1. FEATURES... 3 2. SPECIFICATIONS... 3 3. DIMENSIONS... 4 4. MOUNTING AND INSTALLATION...
More informationENERGY BLADE 3K4. Energy Blade Installation Instructions
ENERGY BLADE 3K4 Energy Blade Installation Instructions 1 Contents General information 2 Scope of these instructions 2 Product information 2 Designated use 3 Warranty 3 Safety instructions 4 Assembly and
More informationManual Refractometer PCE-ALK
PCE Americas Inc. 711 Commerce Way Suite 8 Jupiter FL-33458 USA From outside US: +1 Tel: (561) 320-9162 Fax: (561) 320-9176 info@pce-americas.com PCE Instruments UK Ltd. Units 12/13 Southpoint Business
More informationSEMMME3-073 Checking that completed assemblies comply with specification
Checking that completed assemblies comply with specification Overview This unit identifies the competences you need to carry out checks on mechanical assemblies, in accordance with approved procedures.
More informationKarandikar Laboratories Pvt. Ltd., Gat No. 142, Boisar Chilhar Road, At Betegaon, Boisar (E), Taluka Palghar, Maharashtra
Last Amended on - Page 1 of 41 1 SAFETY 1. Safety Testing IEC 61010:2010 Single Fault Conditions IEC 61010-1 Cls. 4.4 And Similar Visual checks Verification of electrical parameters given on label IEC
More informationRIPPLE TANK - with rippler & kit
GENERAL DESCRIPTION: RIPPLE TANK - with rippler & kit Cat: SW3430-001 with illuminator, rippler & kit. The ripple tank is used to investigate wave motion in a shallow trough of water to understand how
More informationCompiled by: B Beard. Approved by: SH Carstens. Description of requirements and procedures for compact provers to be used as verification standards.
1. Scope Description of requirements and procedures for compact provers to be used as verification standards. 2. Reference documents Trade Metrology Act SANS1698 3. Policy A. BASIC REQUIREMENTS Compact
More informationStandard Operating Procedure Measuring & Testing Equipment
Standard Operating Procedure Measuring & Testing Equipment Purpose: 7.6 Responsibility: 7.6d Scope To have a procedure to ensure that all is controlled, maintained and calibrated to ensure that Product
More information2/2-Way Solenoid Control Valve
2/2-Way Solenoid Control Valve Excellent range (1:200) Very good response Compact valve design Orifice sizes 0.05... 2.0 mm Port connection 1/8 or sub-base Type 2871 can be combined with Type 8605 Digital
More informationExercise 2-3. Flow Rate and Velocity EXERCISE OBJECTIVE C C C
Exercise 2-3 EXERCISE OBJECTIVE C C C To describe the operation of a flow control valve; To establish the relationship between flow rate and velocity; To operate meter-in, meter-out, and bypass flow control
More informationAdditel 761 Automated Pressure Calibrators Selection Guide
Automated Calibrators Selection Guide Model Features Range 761-LLP 761-D 761-L 761-LA 761-M 761-MA 761-H 761-HA 761-BP 0.05 to 8 bar.a -0.90 to 25 bar (1.2 to 115 psi.a) (-13 to 375 psi) 0.1 to 26 bar.a
More informationLevel transmitter LT 100
KROHNE 09/2001 7.02363.21.00 GR/PRINTO Level transmitter LT 100 Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters
More informationPRESSURE SENSOR - ABSOLUTE (0 TO 700 kpa)
Instruction Sheet for the PASCO Model CI-6532A PRESSURE SENSOR - ABSOLUTE (0 TO 700 kpa) 012-06859B 10/98 $1.00 polyurethane tubing syringe cable with DIN s to computer interface quick release s (4) pressure
More information