ADCATROL PNEUMATIC CONTROL VALVES V403 (V403 globe valves series with linear actuators PA or EL series)

Transcription

1 TROL PNEUMTIC CONTROL VLVES V40 (V40 globe valves series with linear actuators P or EL series) DESCRIPTION The PV40 control valves are three-way valve body for mixing service. The P pneumatic actuator is rubber diaphragm and multi-springs. Its action can be D-direct action (air to close) or R-reverse action (air to open). The V40 valves have been designed to assure an accurate control in any process condition. Their wide application ranges allows the use of this valve with the most common process fluids such as water, superheated water, diathermic oil, steam, air, gas and other non corrosive fluids. MIN FETURES Mixing control valve. Standard packing or bellows sealed stem sealing. OPTIONS: USE: VILLE MODELS: VLVE : CONNECTION: PNEUMTIC CTUTORS: CTUTOR CONN: CONTROL SIGNL: ELECTRIC CT: Soft sealing Position transmitter Pneumatic pilot positioner ir filter regulator Top-work manual handwheel Hot and superheated water Diathermic oil Saturated and superheated steam ir, gases and other no corrosive fluids PV40S-EV40S steel construction PV40I-EV40I stainless steel DN1 to DN0 Flanged EN or NSI Threaded connections on request P-20,P-280,P-40,P-4 ¼ NPT-F 0,2 1bar; 0,4 1,2 bar; 0,4 2 bar Consult catalogue IS EL20.00 E MX.IR SUPPLY: MIENT TEMPERTURE: STEM SELING: PLUG TYPES: PORT:, bar -20ºC.+70ºC PTFE/GR V-Rings-220ºC (Standard bonnet) Graphite 00ºC (Extended bonnet) Linear (PL) Full port CE MRKING (PED - European Directive 97/2/EC) HOW TO SELECT: Never size the valve according to the pipe diameter in which it has to be fitted, but according to the required actual flow of steam or water. Refer to the valve calculation data sheet or consult the factory. PN 40 DN1 to DN2 DN40 to DN0 Category SEP - art., paragraph 1 (CE Marked) VLVE ODY LIMITING CONDITIONS V40S PN16 16 bar -10/0ºC 2 bar -10/0ºC 16 bar -10/100ºC 2 bar -10/100ºC 1, bar 200 ºC 20,8 bar 200 ºC 1,4 bar 200 ºC 21 bar 200 ºC 12,1 bar 20 ºC 19 bar 20 ºC 12,7 bar 20 ºC 19,8 bar 20 ºC 11 bar 00 ºC 17,2 bar 00 ºC 11,8 bar 00 ºC 18, bar 00 ºC Maximum temperature limited to the valve packing selected ; Valves with soft seat, maximum allowable temperature: 200ºC VLSTEM PN2 VLVE ODY LIMITING CONDITIONS V40I PN16 PN2

2 DN mm DIMENSIONS - VLVE ODY mm STNDRD PCKING C (mm) ONNET ELLOWS SELED MTERILS POS. DESIGNTION PV40S - EV40S PV40I - EV40I 1 Valve S J2 G / ISI 16 / onnet CF8 / CF8 / ctuator (Steel) S2JRG2 / S2JRG2 / ctuator (St.steel) ISI04 / ISI04 / Diaphragm NR70 NR70 Yoke (steel) C4E / C4E / Yoke (st. steel) ISI04 / ISI04 / Valve plug St.Steel - PTFE/GR St.Steel - PTFE/GR 7 Standard packing PTFE/GR PTFE/GR Type DIMENSIONS - CTUTOR ø E (mm) D (mm) DN1-0 D/R WEIGHT Kgs P ,7 P ,8 P , P , Dir. ction ctuator a) Port to Closes FILURE POSITION DEPENDING ON VLVE DUTY Mixing valve Rev.ction ctuator b) Port to Closes a) Retracted stem on air failure b) Extended stem on air failure Dir. ction ctuator a) Diverting valve Rev.ction ctuator b) Port to Port to Closes Closes Mixing valve Diverting valve VLSTEM

3 DIMENSIONS - VLVE ODY C (mm) DN (mm) (mm) STNDRD PCKING ONNET ELLOWS SELED DIMENSIONS - ELECTRIC CTUTOR M TERILS POS. DESIGNTIO N PV40S - EV40S PV40I - EV40I Type ø E (mm) D (mm) EL EL EL EL EL Valve S J2 G / ISI 16 / onnet CF8 / CF8 / ctuator See IS20.00 E See IS20.00 E Yoke (steel) C4E / C4E / Yoke (st. steel) ISI04 / ISI04 / Valve plug St.Steel - PTFE/GR St.Steel - PTFE/GR 7 Standard packing PTFE/G R PTFE/G R VLSTEM

4 MX. PERM.PRESS.DROP IN bar - to open -Reverse or direct action actuator CTUTOR CONTROL SIGNL DN1 DN20 DN2 DN2 DN40 DN0 DN6 DN80 DN100 P-20 P-280 P-40 P-40 P4 0,2 1 bar 6 6 0,4 1,2 bar ,4 2 bar ,2 1 bar , 0,4 1,2 bar ,4 2 bar , 0,2 1 bar ,4 1,2 bar ,4 2 bar ,2 1 bar 0,4 1,2 bar 0,4 2 bar 0,2 1 bar ,4 1,2 bar ,4 2 bar 4 The pressure drop values are referred to closed valves. They have been verified by a control signal coming from an electro-pneumatic converter with an enduring minimum signal of 0,2 bar. The actuator press. drops given with closed valve for the actuator signal 0,4-2 bar are also valid for ON-OFF service with air supply at 2, bar. Special spring drops available on request. The pressure drop values must be used within the body rating limits. For electric actuator selection please consult catalogue IS EL E or our technical department. VLVE STROKE IN mm DN1 DN20 DN2 DN2 DN40 DN0 Stroke FLOW RTE COEFFICIENTS DN1 DN20 DN2 DN2 DN40 DN0 Kvs 4 6, Kvs in m/h, see data sheet IS PV10.00 E ; For conversion Kvs = Cv(US) x 0,8 VLSTEM

5 ORDERING CODES V40 VLVE CODES V.4 S ctuator Type (1) Pneumatic ctuator P Electric ctuator E Group Designation Globe valve, three way V Valve Model PN2, steel body.4s PN2 stainless steel body.4i Flow Mixing M.X. Stem Sealing PTFE/GR-V-Rings / Standard bonnet Virgin PTFE V-Rings / Standard bonnet Graphite / Standard bonnet 1 2 Valve Plug PL (linear) - Soft (PTFE/GR) PL (linear) - Metal ISI16 / Pipe Connection Flanged EN PN16 Flanged EN PN40 Flanged NSI # Size DN1 DN20 ctuator Extras () 6 7 L N V 1 20 (1) E CTUTOR CODES ( pneumatic ) Group Designation Multi-spring, pneumatic linear actuator ctuator Size From DN1 to DN0 4 - From DN1 to DN0 P. To be introduced on ".X.", if supplied in combination with the valve. Example: P. V40S mixing valve model PL soft plug, PTFE/GR stem sealing DN0 complete with reverse action 1 actuator signal 0,4-1,2bar, size40 steel. 7 Code: PV.4S.M16L0.R18 ctuator Direct ction Reverse ction ctuator Constrution Steel construction (painted) - standard Stainless steel construction Control Signal 0,2-1 bar (/1 psi) 0,4-1,2 bar (6/18 psi) 0,4-2 bar (6/0 psi) D R REMRKS: (1)- Indicate actuator type. (2)- Omitted if the standard actuator is selected. ()- To be used only when a non-standard combination valve is supplied. (2) TROL control valves are identified by a I serial number on a nameplate, located on the actuator yoke. 1 lways order spares by using that serial 18 number. If the valve has non-standard extras 0 the serial number has also an E (extras). VLSTEM