BRAZING & CUTTING. Kits Easy To Use
|
|
- Sabrina Clark
- 6 years ago
- Views:
Transcription
1 BRAZING & CUTTING Kits Easy To Use
2 Easy to use kits fully or partly (equipped with quick connections) assembled kits for brazing (kits no. 1 and no. 2) or cutting (kits no. 3 and no. 4). HIGH QUALITY PRODUCED IN EUROPEAN UNION SAVE TIME AND JUST TAKE OUT FROM THE BOX AND ENJOY IT 2 KITS EASY TO USE
3 KIT EASY TO USE 1 KITEASY1AC & KITEASY1AC-10 Fully assembled kit for oxygen - acetylene brazing The kit EASY TO USE 1 includes: Model 601 oxygen and acetylene regulators: for light duty welding and brazing; cylinder gas supplied; maximum inlet pressure 230 bar; compact, single stage; rugged construction; forged brass body and bonnet; 50 mm solid and safety gauges; 7 years warranty; rear inlet connection AC 601D-10-OX MODEL NO. GAS MAX INLET DELIVERY MAX AIR FLOW (m 3 /h) DELIVERY PRESSURE AC Acetylene , , D-10-OX Oxygen SUPPLY PRESSURE Yoke for acetylene assembly. Regulator flashback arrestors RGB for oxygen and 188-LGB for acetylene: prevent reverse flow of gases with built-in check valve; extinguish flashback fire with sintered metal filter; maximum gas flow up to l/h for fuel gas and l/h for oxygen; maximum gas pressure 1,5 bar for acetylene and 15 bar for oxygen. Torch handle 19-6: light weight handle (only 240 g); silver brazed twin tube construction for safety and durability; ball valve for fast and accurate flame adjustment. 88-6SVL and 88-6SVR check valves: help prevent dangerous reverse flow mixing of gas in the hose; compact light weight design; maximum gas pressure: acetylene 1,5 bar; oxygen 20 bar. L-19-3 acetylene welding and brazing tip: welding up to 2 mm; flow 160 l/h; gas pressure: 2,5 bar oxygen and 0,015 0,2 fuel gas. Gas hose: twin hose for acetylene and oxygen 6 mm, with fittings: 5 m: KITEASY1AC; 10 m: KITEASY1AC-10. YOKE 188-(RGB & LGB) 19-6 L-19 KITS EASY TO USE 3
4 KIT EASY TO USE 2 Fully assembled kit for oxygen - alternative fuel brazing KITEASY2LP & KITEASY2LP-10 The kit EASY TO USE 2 includes: Model 601 oxygen and propane regulators: for light duty welding and brazing; cylinder gas supplied; maximum inlet pressure 230 bar; compact, single stage; rugged construction; forged brass body and bonnet; 50 mm solid and safety gauges; 7 years warranty; rear inlet connection LP 601D-10-OX MODEL NO. GAS MAX INLET DELIVERY MAX AIR FLOW (m 3 /h) DELIVERY PRESSURE LP Propane D-10-OX Oxygen SUPPLY PRESSURE Regulator flashback arrestors RGB for oxygen and 188-LGB for fuel gas: prevent reverse flow of gases with built-in check valve; extinguish flashback fire with sintered metal filter; maximum gas flow up to l/h for fuel gas and l/h for oxygen; maximum gas pressure 5 bar for propane, 3,5 for hydrogen and 15 bar for oxygen. Torch handle 19-6: light weight handle (only 240 g); silver brazed twin tube construction for safety and durability; ball valve for fast and accurate flame adjustment. 88-6SVL and 88-6SVR check valves: help prevent dangerous reverse flow mixing of gas in the hose; compact light weight design; maximum gas pressure: propane 5 bar; oxygen 20 bar. L-19-3N propane brazing tip: flow - oxygen 550 l/h and 140 l/h fuel gas; gas pressure: 1,0 bar oxygen and 0,015 0,2 fuel gas. Gas hose: twin hose for fuel gas and oxygen 6 mm, with fittings: 5 m: KITEASY2LP; 10 m: KITEASY2LP (RGB & LGB) 19-6 L-19 4 KITS EASY TO USE
5 KIT EASY TO USE 3 Partly assembled kit for oxygen - acetylene cutting Easy connection with quick action couplings KITEASY3AC & KITEASY3AC-10 The kit EASY TO USE 3 includes: Model 801 oxygen and acetylene regulators: for medium duty cutting, up to 300 mm steel; cylinder gas supplied; maximum inlet pressure 230 bar; single stage; rugged construction; forged brass body and bonnet; smooth adjustment with high precision; 63 mm solid and safety gauges; 7 years warranty. MODEL NO. GAS MAX INLET DELIVERY MAX AIR FLOW (m 3 /h) 801B-1.5-AC DELIVERY PRESSURE 801B-1.5-AC Acetylene , , DB-10-OX Oxygen Yoke for acetylene assembly. Regulator flashback arrestors RGB for oxygen and 188-LGB for acetylene: prevent reverse flow of gases with built-in check valve; extinguish flashback fire with sintered metal filter; maximum gas flow up to l/h for fuel gas and l/h for oxygen; maximum gas pressure 1,5 bar for acetylene and 15 bar for oxygen. 188-(RGB & LGB) SUPPLY PRESSURE 801DB-10-OX Cutting attachment model 72-3: cuts up to 100 mm versatile - for acetylene and alternative fuels; head 90 o equal pressure; solid forged head resists abuse and distortion; compact and lightweight triangular tube design compact and lightweight with exceptional strength and rigidity; brazed connections prevent leaks; protected torch union nut protects seats and o-rings from abuse; solid forged lever for exceptional strength; ease-on cutting oxygen control for smoother starts; head mixing; use with 6290 cutting tips Torch handle 543: for heavy-medium duty applications; cuts up to 150 mm steel plate; conforms to ISO 5172; ergonomic design with front valves; forged aluminium alloy body; high precision ball valves; coated with tough black polyurethane for longer life. Cutting tip AC: two piece tip; plated shell; suitable for heavy preheat AC MODEL NO. PLATE THICKNESS (mm) OXYGEN (bar) AC ,0-4,5 3,0-0,8 ACETYLENE EQUAL PRESSURE (bar) 88-6GBL and 88-6GBR check valves: help prevent dangerous reverse flow mixing of gas in the hose; compact light weight design; maximum gas pressure: acetylene 1,5 bar; oxygen 20 bar. 543 Gas hose: twin hose for acetylene and oxygen 6 mm, with quick action couplings and fittings: 5 m: KITEASY3AC; 10 m: KITEASY3AC-10. NOTE: with the additional equipment available from Harris KIT EASY TO USE 3 can be used for brazing, welding and have bigger cutting capabilities. For the details ask your local Harris office. KITS EASY TO USE 5
6 KIT EASY TO USE 4 Partly assembled kit for oxygen - alternative fuel cutting Easy connection with quick action couplings KITEASY4LP & KITEASY4LP-10 The kit EASY TO USE 4 includes: Model 801 oxygen and propane regulators: for medium duty cutting, up to 300 mm steel; cylinder gas supplied; maximum inlet pressure 230 bar; single stage; rugged construction; forged brass body and bonnet; smooth adjustment with high precision; 63 mm solid and safety gauges; 7 years warranty. MODEL NO. GAS MAX INLET DELIVERY MAX AIR FLOW (m 3 /h) 801BP-4-LP DELIVERY PRESSURE 801BP-4-LP Propane , DB-10-OX Oxygen Regulator flashback arrestors RGB for oxygen and 188-LGB for fuel gas: prevent reverse flow of gases with built-in check valve; extinguish flashback fire with sintered metal filter; maximum gas flow up to l/h for fuel gas and l/h for oxygen; maximum gas pressure 5 bar for propane; 3,5 bar for hydrogen and 15 bar for oxygen. 188-(RGB & LGB) SUPPLY PRESSURE 801DB-10-OX Cutting attachment model 72-3: cuts up to 100 mm versatile - for acetylene and alternative fuels; head 90 o equal pressure; solid forged head resists abuse and distortion; compact and lightweight triangular tube design compact and lightweight with exceptional strength and rigidity; brazed connections prevent leaks; protected torch union nut protects seats and o-rings from abuse; solid forged lever for exceptional strength; ease-on cutting oxygen control for smoother starts; head mixing; use with 6290 cutting tips Torch handle 543: for heavy-medium duty applications; cuts up to 150 mm steel plate; conforms to ISO 5172; ergonomic design with front valves; forged aluminium alloy body; high precision ball valves; coated with tough black polyurethane for longer life. Cutting tip NX: two piece tip; plated shell; suitable for general preheat NX MODEL NO. PLATE THICKNESS (mm) OXYGEN (bar) NX ,0-4,0 3,0-0,8 FUEL GAS EQUAL PRESSURE (bar) 88-6GBL and 88-6GBR check valves: help prevent dangerous reverse flow mixing of gas in the hose; compact light weight design; maximum gas pressure: propane 5 bar; oxygen 20 bar. 543 Gas hose: twin hose for alternative fuel gases and oxygen 6 mm, with quick action couplings and fittings: 5 m: KITEASY4LP; 10 m: KITEASY4LP-10. NOTE: with the additional equipment available from Harris KIT EASY TO USE 4 can be used for brazing, welding and have bigger cutting capabilities. For the details ask your local Harris office. 6 KITS EASY TO USE
7
8 Harris Calorific International Sp. z o.o. ul. Strefowa Dzierżoniow, Poland marketingharris@lincolnelectric.eu Harris Calorific Srl Via Ronco Maruni San Lazzaro di Savena (BO), Italy +39(51) fax: +39(51) venitalia@harriscal.it Harris Calorific GmbH Beethovenstraße Berkheim, Germany +49(0) fax: +49(0) info@harriscal.de Harris Euro, S.L.U. C/ Arq. Ricard Giralt s/n Nave Figueres (Girona), Spain fax: harriseuro@harriseuro.com AB_EASY_TO_USE_10_2016_EN
PRESSURE CONTROL REGULATORS
REGULATOR HARRIS STYLE SINGLE STAGE 201 Series Medium Duty Single stage construction Forged brass body for maximum strength Chrome bonnet Neoprene diaphragms Sintered metal inlet filter to trap impurities
More informationVisit our Web site: http: //
CONTENTS: Medium Duty Victor Style Welding And Cutting Outfit MANUFACTURED BY AN ISO 9001 REGISTERED FIRM Visit our Web site: http: // www.northerntool.com TABLE OF CONTENTS Page INTRODUCTION... 1 SECTION
More informationNEW Edge Series Products: OUTFITS and REGULATORS
NEW Edge Series Products: OUTFITS and REGULATORS NOW Including ESS3 Models and More Edge Series Outfits User Friendly Advanced Design Outstanding Flow Performance Unsurpassed Safety www.victoredge.com
More informationINDUSTRIAL. Gas Distribution Systems
INDUSTRIAL Gas Distribution Systems GAS & FLOW CONTROL CUTTING HEATING BRAZING SOLDERING WELDING CONTENTS The Harris Products Group... 4 One-side gas supply manifolds... 8 Two side gas supply manifolds...
More informationTamper proof, self reseating internal safety
GAS EQUIPMENT REGULATORS GENERAL FEATURES Regulators: Harris regulators are designed and manufactured according to the most recent international standards: - ISO 2503 for cylinder pressure regulators for
More informationCutting Tip SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2 SC12-1 SC12-2. Welding Tips. Heating Tip. Part No. HTA
Smith Equipment American Classic Heavy Duty, Welding & Outfits Cuts up to 8"- Welds up to /2" These premium heavy duty outfits feature Smith s proven in-tip gas mixing technology and include torch mount
More informationOXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS
OXY FUEL SYSTEM SET UP & SHUT DOWN PROCEDURE CHECKLIST ACETYLENE FUEL GAS Items needed for demonstrations: Fire extinguisher PPE (Personal Protective Equipment): o Lab coats/welding jackets o Leather gloves
More informationGenuine. Kit includes: This kit contains CIGWELD s Genuine COMET 700 Oxygen and Acetylene Regulators, Blowpipe and Cutting Attachment.
Gas Kits These kits contain CIGWELD s renowned COMET Regulators, Blowpipe and Cutting Attachment. COMET Custom Kit COMET Regulators Independently certified to AS4267 (COMET TM 700 & 500 Oxygen & Acetylene
More informationHow Flashback Arrestors Work
What are Flashback Arrestors Flashback Arrestors prevent reverse flow of gases with built-in check valves and extinguishes flashback fire with a stainless steel sintered element. How Flashback Arrestors
More informationNEW EDGE SERIES REGULATORS & OUTFITS
WE LISTENED. WE DELIVERED. NEW EDGE SERIES REGULATORS & OUTFITS Victor Introduces the Newest Addition to the EDGE Series: The EHP3 High Pressure Regulator. EDGE Regulators Now Include These Models EHP3
More informationMillerWelds.com A-Miller ( )
As the leader in welding and cutting technology, Miller has always made it a top priority to provide the very best solutions to the industry no matter how challenging the application. With that very principle
More informationINSTRUCTION MANUAL For Gas Welding, Cutting, Brazing & Heating Torches.
THE HARRIS PRODUCTS GROUP INSTRUCTION MANUAL For Gas Welding, Cutting, Brazing & Heating Torches. IMPORTANT: For your own safety read these instructions. Failure to do so can lead to serious injury. www.harrisproductsgroup.com.au
More informationMastar Outfits KL550-TR KL550-4P-T
Ranked #1 for Commercial Refrigeration Technicians Mastar Highly rated by commercial refrigeration technicians, Mastar outfits contain all the necessary top of the line components for welding, cutting
More informationOne Piece Cutting Torch. Cuts 300 mm QUALITY GAS EQUIPMENT.
One Piece Cutting Torch Cuts 300 mm QUALITY GAS EQUIPMENT www.tesuco.com.au Cuts 300 mm Key Features Gas specific injector designed for maximum efficiency For cutting up to 300 mm and for gouging applications
More informationCutting. Heating. Welding. OxyFuel Brochure
utting Heating Welding Brochure System Solutions Firepower Products Victor Technologies, a leader in metal cutting, gas control and specialty welding solutions, is meeting the needs of people who demand
More informationChiyoda's High-Pressure Gas Control System and Equipment
Chiyoda's High-Pressure Gas Control System and Equipment 2012 CHIYODA HELPS YOUR GAS RELATED JOBS... Since the establishment 1946, we started as a manufacturer of Gas Welding & Cutting Equipment. Nowadays
More informationWeld/Braze Tip Data. IMPORTANT: Use proper type of tip for each type torch. Airc o. N U M B E R Dril l Siz e. D E C I M A L Size
Note: This data has been compiled by Uniweld...We share this information and acknowledge that Uniweld s information is to the best of its ability for accuracy. Please use safe practices when welding, cutting
More informationOxy-Fuel Safety Training. Participant s Guide
Oxy-Fuel Safety Training Page 1 of 19 Contents What s Included?... 3 Oxy-Fuel Safety Training Objectives... 4 Chapter 1: Safety & Responsibility... 6 Chapter 2: Gases in the Work Area... 7 Chapter 3: Equipment
More informationCOMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING
INCH-POUND 2 July 2010 SUPERSEDING A-A-55826 5 September 1996 COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING The General Services Administration has authorized the use
More informationSpecifications. Dimensions Product Only With Packaging Materials of Construction Kit Box. Equipment Tray Insert. Oxygen / Acetylene GWKOA
WELDING, BRAZING AND CUTTING KITS Tesuco offers a range of oxygen / acetylene and oxygen / LPG kits to suit the industries they are designed for. This includes complete cutting and welding kits and kits
More informationTurn to the. Harris Industrial Equipment Catalog. Pros
Turn to the Harris Industrial Equipment Catalog Pros contents THE HARRIS PRODUCTS GROUP 4 Why Professional Tradesmen Turn to The Pros 6 Single-Stage Regulators 8 601, 301 10 25GX 11 25GX HVAC 12 425 13
More informationOXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT
OXYGEN ACETYLENE WELDING & CUTTING EQUIPMENT Introduction: The oxy-acetylene torch can be used for various tasks. It can be used for cutting steel, welding steel, brazing and for heating metal. The oxy-acetylene
More informationflashback arrestors Regulator end
flashback arrestors Regulator end Regulator end flashback arrestors are safety devices fitted to the outlet of a regulator. They incorporate a number of features designed to protect upstream equipment
More informationMachine Cutting Torches Series 4700
ADI 1580-E Certified ISO 9000 Machine Cutting Torches Series 4700 INSTRUCTIONS Before Installing, Operating or Servicing Read and Comply With These Instructions This symbol on the product means the product
More informationREGULATORS FLOWMETERS HUMIDIFIERS. Professional GAUGES ASSESSORIES. Medical Apparatus. and Assessories ISO 13485/ISO 9001 CERTIFICATION
Medical Apparatus REGULATORS FLOWMETERS Professional Medical Apparatus and Assessories HUMIDIFIERS GAUGES ASSESSORIES ISO 13485/ISO 9001 CERTIFICATION Company Profile MORRIS ENGINEERING WORKS LTD. was
More informationWELDING TOOLS AND ACCESSORIES
WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES Hoses / Automatic roller for oxygas hoses.............................................. 89 Quick action coupling.................................................................
More informationProduct Catalogue 2018
Product Catalogue 2018 Oxy-fuel Cutting and Welding Technology Mechanische Werkstätten Wurzen GmbH Oxy-fuel Cutting and Welding Technology Mould and Tool Production Oxy-fuel Cutting and Welding Technology
More informationSafe Work Instructions For Oxygen Acetylene Equipment
Safe Work Instructions For Oxygen Acetylene Equipment Policy Sponsor: Assistant Vice President Facilities Management Responsible Unit: Trade Services Approval Date: September 2010 Revisions: January 2018
More informationSpecialty Gas Equipment Catalogue
THE HARRIS PRODUCTS GROUP The Harris Products Group was formed by combining two strong names in the welding business - Harris Calorific and J.W. Harris. The Harris Products Group is a world leader in metalworking
More informationAir-Propane Equipment QUALITY GAS EQUIPMENT.
Air-Propane Equipment QUALITY GAS EQUIPMENT www.tesuco.com.au Combination Chart SNT1000 SNT600 M20 x 1 SNT220 SSB80-SPX SNT75 M20 x 1 SNTBSB7 SNTBSB5 SNTBSB3 SSB80 SBM2B SNTBT28M SNTBT22M M14 x 1 SNTBT18M
More informationGas Equipment from ESAB
Gas Equipment from ESAB A full line of gas equipment solutions for every application, industry, and environment. Gas Equipment ESAB's premium blend of time tested design and modern innovation is the result
More informationHose Fittings. Pressure Gauges & Filter GAS EQUIPMENT. Little Torch Hose Nuts. Little Torch Hose Tailpiece. Little Torch & Quickbraze Hoze Ferrule
Hose Fittings Little Torch Hose Nuts Type Nut Thread & Number Hose ID Size 16173 Oxygen 9/16 in-18 RH 1/8 in (3 mm) 16174 Fuel Gas 9/16 in-18 LH 1/8 in (3 mm) 16174 1882 Little Torch Hose Tailpiece Type
More informationQUALIFIED EXPERIENCE AND CERTIFIED RELIABILITY
Pressure reducers QUALIFIED EXPERIENCE AND CERTIFIED RELIABILITY Oxyturbo has been operating since 1982 in the field of specialised technologies for the use of cylinder industrial gases, positioning itself
More informationCENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES
P0170E-1.DOCX/08.16/MG CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES With a Central Gas Supply System, individual work places or gas take-off stations are supplied with gas through
More informationoxyacetylene welding/cutting torch set
instructions for oxyacetylene welding/cutting torch set model no: SGA2.V2 & SGA6.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
More informationREGULATORS AND FLOWMETERS
REGULATORS AND FLOWMETERS SINGLE STAGE RC RANGE BROMSI Gas cylinders are available in many different shapes and sizes, with different valve connections - either vertical or horizontal. To suit this, Tesuco's
More informationTypical Single Stage Design SR 450 Series Shown. Two stage regulators add the following in addition to the features listed above:
Single Stage : Recommended for applications where slight delivery pressure increases (due to decreasing cylinder pressures) would not affect the performance characteristics of the work or test results.
More informationHigh Pressure Cylinder Valves
High Cylinder Valves CBA series Commercial and POL Style Acetylene Cylinder Valves O-Ring seal type 8 CBO series Vertical Outlet Acetylene Valve with Handwheel for Collar Style Cylinders 9 CBH/CBI series
More informationSAFETY AND OPERATION MANUAL
SAFETY AND OPERATION MANUAL Congratulations on purchasing the GASPONY 1 Portable Welding/Cutting Outfit! This manual is designed to help you get the most out of your GASPONY 1. CAREFULLY REVIEW ALL SAFETY
More informationV-24 OXYGEN LANCE VALVE
INSTRUCTIONS for F-4737-U May, 2009 V-24 OXYGEN LANCE VALVE w/ C -Size Inlet w/ B -Size Inlet V-24 Oxygen Lance with 1/8" Pipe Holder... 9728D65... 2218939 V-24 Oxygen Lance with 1/4" Pipe Holder... 9728A65...
More informationPARTS, SERVICE & REPAIR BULLETIN
WH4C PARTS, SERVICE & REPAIR BULLETIN 400 SERIES HEAVY DUTY WELDING HANDLE Manual No: 0056-3763 Issue Date: October 07, 03 Revision: AA VictorTechnologies.com Table of Contents SECTION : GENERAL SAFETY
More informationDescription Advanced Features Typical Applications
Series single stage, brass barstock line regulator Description Advanced Features Typical Applications The Series regulators are intended for secondary pressure control of noncorrosive, high purity or liquefied
More informationProcess gas requirements (Core, VWI, and OptiMix gas connect consoles)
Process gas requirements (Core, VWI, and OptiMix gas connect consoles) You must supply the process gases and supply gas plumbing for your cutting system. See Table 7 on page 46 for supply gas quality,
More informationA guide to Part 10 of the
OCCUPATIONAL HEALTH AND SAFETY DIVISION Welding, Cutting, Burning and Soldering A guide to Part 10 of the Occupational Safety General Regulations October 2007 A GUIDE TO PART 10 WELDING, CUTTING, BURNING
More informationBrazing. Turn up the. When brazing and soldering, most HVACR technicians
Turn up the Brazing Heat A discussion about oxygen/acetylene vs. air/acetylene torches, including applications, comparisons, and base and filler metal suggestions. B y B o b H e n s o n a n d M i k e S
More informationTorches, Outfits & Accessories
150 SERIES OXY-ACETYLENE OUTFITS 0384-05 These user friendly outfits offer a complete system for smaller welding and cutting jobs. The 150 series is best suited for autobody repair, motor enthusiasts,
More informationBEST BUY. Cutting and Welding Torches GAS RANGE. UK Sales Export Sales
290 RANGE Cutting and Welding Torches BEST BUY Features Cuts to 10" (250mm) Solid brass and stainless steel construction Nozzle mix design for maximum safety Backfire resistant design Easy gri control
More informationOXYGEN - ACETYLENE Cutting - Welding - Heating and Brazing Kit
GAS EQUIPMENT INDUSTRIAL CUTTING & WELDING SETS REGULATORS CUTTING EQUIPMENT WELDING - BRAZING - HEATING GAS CUTTING MACHINES AIR - PROPANE HEATING EQUIPMENT TORNADO REGULATORS HIGH PRESSURE REGULATORS
More informationHIND MEDICO PRODUCT (AN ISO 9001:2008 CERTIFIED COMPANY)
HIND MEDICO PRODUCT (AN ISO 9001:2008 CERTIFIED COMPANY) INDUSTRIAL GAS EQUIPMENT AND WELDING SOLUTIONS ABOUT US To Our Valued Customers, CHOICE Something we will all like to have but do not always get!
More informationGas Equipment. For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT.
For Cutting, Gouging, Welding & Heating QUALITY GAS EQUIPMENT www.tesuco.com.au Introduction Beginning in 1988, Tesuco has established itself as a specialist equipment supplier for all gas welding, heating
More informationBRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England
BRITISH COMPRESSED GASES ASSOCIATION Registered office: 4a Mallard Way, Pride Park, Derby, UK. DE24 8GX Company Number: 71798, England www.bcga.co.uk TECHNICAL INFORMATION SHEET 29 OXY-FUEL GAS EQUIPMENT
More informationBRAZING EQUIPMENT PORTAPAK KIT
BRAZING EQUIPMENT PORTAPAK KIT Portapak Trolley Single Stage 2 Gauge Acetylene Regulator Single Stage 2 Gauge Oxygen Regulator Acetylene Flashback Arrestor Oxygen Flashback Arrestor 5 Meter Oxy / Acetylene
More informationEXOTHERMIC TORCH ADAPTER. Instruction Manual
EXOTHERMIC TORCH ADAPTER Instruction Manual CAUTION FLAME TECH ALWAYS RECOMMENDS USING FLASH BACK ARRESTORS (must purchase separately) Pre-operation Checklist Before you begin, the following routine checks
More information4 Machine maintenance and repair
3.3 lift device consists of: lift motor, lead screw, guide rod, lifting seat Lift motor Lead screw Guide rod Lifting seat Diagram 3.3 3.4 torch holder set The torch holder consist of holder connection,
More informationCUTTING TORCHES SERIES
CUTTING TORCHES 9000 9500 9700 SERIES PARTS mis symbol on the product + means the product is nsted JULY 1996 by Underwriters Laboratories. Inc SUPERSEDES MARCH 1994 USER RESPONSIBILITY This equipment
More informationREGULATORS FOR SPECIFIC APPLICATIONS
SINGLE-STAGE REGULATORS FOR NITROUS OXIDE AND CARBON DIOXIDE (MODELS SG9011, SG9012, SG9014) Nitrous Oxide and Carbon Dioxide frequently cause ordinary regulators to freeze up. Models SG9011, SG9012 and
More informationRefrigerant Gases Valves
Refrigerant Gases Valves RUS series Single Outlet Compact Refrigerant Recovery Valves 46 RDU series Diaphragm Packless Multivalves for Refrigerant Gases 47 RBV series Single Outlet Diaphragm Packless Valves
More informationINDUSTRIAL FLOWMETERS AND REGULATORS
INDUSTRIAL FLOWMETERS AND REGULATORS ENTERPRISES This catalog provides a comprehensive source of information on Western s line of products used in the control, transmission and storage of compressed gases
More informationTRADE OF HEAVY VEHICLE MECHANIC
TRADE OF HEAVY VEHICLE MECHANIC PHASE 2 Module 1 Induction/Customer Care/Bench Fitting/Welding UNIT: 5 Table of Contents Aims and Objectives... 1 Learning Outcome:... 1 Setting up an Oxyacetylene torch...
More information10.1 Main Unit. INDEPENDENT WHOLESALE WELDING SUPPLY Ph: Fax: Website:
10.1 Main Unit 10.1 Main Unit 1 Case 60031802 1 2 Cross feed holder 60031803 1 3 Cross feed liner 60031804 1 4 Handle 60031805 1 5 Fan cover 60031806 1 6 Bottom plate 60031807 1 7 Heat shield 60031808
More informationCUTTING TORCH SAFETY. The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment
CUTTING TORCH SAFETY The Safe Use and Handling of OXY Fuel Cutting, Welding, and Heating Equipment Introduction Safe operation for the use of gas cutting, heating and welding requires a clear understanding
More informationCUTTING AND WELDING TORCHES HANDLES
INSTRUCTIONS MANUAL GALA SOL, S.A. FABRICA DE APARATOS Y MAQUINAS DE SOLDADURA Y CORTE AUTOGENOS C/ ALBARRACIN 25-27 TFNO.: 976 513 055 FAX: 976 515 303 50015 ZARAGOZA e-mail: galasol@galasol.com GALA
More informationDo you require maximum pressure stability in your gas supply?
TECHNOLOGY FOR GASES Do you require maximum pressure stability in your gas supply? Rely on 40 years of experience in dome-loaded pressure regulation. Dynamic WITT regulators ensure a stable, adaptable
More informationPressure regulators for a wide range of applications
Pressure regulators Pressure regulators for a wide range of applications Pressure regulators are used to reduce a gas from a higher input pressure (p1) to a lower output pressure (p2). They are used everywhere
More informationCRYOGENIC SERIES Regulators, Pressure Gauges, Shut-off Valves, Relief Valves Technology for a Better Future
www.genstartech.com Regulators, Pressure Gauges, Shut-off Valves, Relief Valves CRYOGENIC SERIES Technology for a Better Future GENTEC CRYOGENIC SERIES Cryogenic Shut-off Valves Cryogenic Relief Valves
More informationWilkins Safety Group
Gas Welding INTRODUCTION Welding is the union of pieces of metal by fusing the opposing surfaces that have been made molten by heat. Processes similar to welding include brazing and soldering. Allied processes
More informationASSEMBLY & OPERATIONS MANUAL. Straight & Clean Torch Cuts. Every Time.
ASSEMBLY & OPERATIONS MANUAL Straight & Clean Torch Cuts. Every Time. CAUTION ALWAYS USE FLASH BACK ARRESTORS (purchased separately) READ THIS BOOK THOROUGHLY AND FOLLOW INSTRUCTIONS! FAILURE TO USE OSHA
More informationWescol WESCOL LIMITED
Introduction Limited offer a comprehensive range of industrial gas control equipment, providing solutions for cutting, welding, heating and gas distribution. One of only two manufacturers of such product
More informationSafety, Set-Up, and Operating Instructions
Read all Instruction, SAVE THESE INSTRUCTION Safety, Set-Up, and Operating Instructions Gas Welding, Cutting, Brazing & Heating There are many hazards to be considered when using oxy-fuel welding, cutting,
More informationINSPECTION of PORTABLE and OXY FUEL GAS SYSTEMS
1.0 PURPOSE This work Instruction describes the procedure for the inspection, testing and identification requirements of portable and mobile oxy-fuel gas systems for welding, cutting, heating to ensure
More informationGas Apparatus
Gas Apparatus www.airliquide.ca -800-87-7697 Gas Apparatus Put safety first in gas welding and cutting applications Important Product Safety Recommendations Before use, safely secure cylinders to a wall
More informationGCE CENTRAL GAS SYSTEMS THE DRINKS DISPENSE INDUSTRY EQUIPMENT FOR GAS SUPPLIER SYSTEMS
THE DRINKS DISPENSE INDUSTRY EQUIPMENT FOR GAS SUPPLIER SYSTEMS THE GCE BUSINESS GCE has almost 100 years of experience in the manufacture and supply of high pressure gas equipment. During this time the
More informationTIPS Oxyfuel advice from the Annual Ironworker Instructor Training Program
TIPS Oxyfuel advice from the Annual Ironworker Instructor Training Program by Travis Ham, senior product manager, gas equipment, ESAB, Victor Technologies During the week of July 18, a team of ESAB experts
More informationfig.1 Instructions for: Gas welding/cutting kit
Instructions for: Gas welding/cutting kit MOdel No: SGA1.v3 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
More informationMEDICAL CYLINDER VALVES
MEDICAL CYLINDER VALVES 3 1 Medical integrated valve for oxygen air and medical mixture 1.1 ALIONE 1.2 ALPINOX-valve 1.3 ALPINOX-valve compact 2 Cylinder valve with RPV for oxygen and medical gases -
More informationThis catalog provides a comprehensive source of information on
This catalog provides a comprehensive source of information on Western s line of products used in the control, transmission and storage of compressed gases for industrial and other related applications.
More informationTechnical Datasheet. Rigid & Retractable Pendants. Rigid Pendant
Rigid & Retractable Pendants Rigid Pendant Description Rigid pendants are intended for use operating theatres, anaesthetic rooms and similar medical locations. They are an ergonomic solution for the provision
More informationOperator s Manual AFA-1, AFA-2, & AFP-1 Torch Kits
Operator s Manual AFA-1, AFA-2, & AFP-1 Torch Kits AFA-1 (50210) Torch kit AFA-2 (50211) Torch Kit AFP-1 (50212) Torch kit WARNING: Do not assemble, install, or operate this equipment without reading ALL
More informationOXYGEN & ACETYLENE: Safety & Handling for these Highly Combustible Gases
OXYGEN & ACETYLENE: Safety & Handling for these Highly Combustible Gases TRAINING SOURCE: Safety Division, Central Welding Supply, www.centralwelding.com Oxygen & Acetylene Safety Topics covered Oxygen:
More informationPremium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
More informationINSTRUCTIONS FOR SCORPION TORCHES
GLASS TORCH TECHNOLOGIES, INC. 55 N. Main Street Tioga, Pa. 16946 (570) 835-9777 gtt@glasstorchtech.com www.glasstorchtech.com INSTRUCTIONS FOR SCORPION TORCHES To Attach your Lines to the Torch: The Fuel
More informationTube Puller CP/CPS series. Pullers designed with cutting edge technology
Q U A L I T Y T U B E T O O L S www.krais.com CP/CPS series Pullers designed with cutting edge technology Q U A L I T Y T U B E T O O L S w w w. k r a i s. c o m MAIN FEATURES All new CP collet type and
More informationWelding. Module
Welding Module 19.2.4 Module 19.2.4 Describe the oxy fuel gas welding process. Process: setting up the equipment, leak testing, oxy-fuel gas mixing, flame adjustment (including oxidizing, neutral and carburizing
More informationX11 Overview 1. Product Catalogue. Gas Welding, Cutting, Soldering and Heating.
X11 Overview 1 Product Catalogue. Gas Welding, Cutting, Soldering and Heating. 2 X11 Overview Contents. Content 03 Capture 1. Introduction. 05 How to Order 06 X11 Overview 08 X21 Overview 10 MIG/MAG and
More informationCI-SfB 732 (5-1) x. - laboratory fittings
CI-SfB 732 (5-1) x - laboratory fittings - ordering information Generally, item numbers for fittings have the following structure XL XX XXX 10 XX - XX X brownall Labtap Series no. Models 30 - Angle valves
More informationGAS EQUIPMENT. regulators and products for gas cutting and welding, soldering and brazing.
GAS EQUIPMENT regulators and products for gas cutting and welding, soldering and brazing. GASIQ THE INTELLIGENT CHOICE IN GAS EQUIPMENT GasIQ is a smart choice for gas equipment when you are looking for
More informationISO 9539 INTERNATIONAL STANDARD. Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes
INTERNATIONAL STANDARD ISO 9539 Second edition 2010-01-15 Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes Matériel de soudage aux gaz Matériaux utilisés
More informationproline manifolds and outlets
proline manifolds and outlets central gas supply for industrial gases Edition 1/2015 GCE worldwide www.gcegroup.com the GCE Business GCE has almost 100 years of experience in the manufacture and supply
More informationTotal Pressure Regulator Solutions.
Total Pressure Regulator Solutions www.pressure-tech.com Working with customers to support their exact needs A pressure regulator is a critical component in any fluid control system. At Pressure Tech,
More informationLP GAS PRODUCTS HIGH QUALITY GAS PRODUCTS SINCE 1957
LP GAS PRODUCTS HIGH QUALITY GAS PRODUCTS SINCE 1957 Enerco, based in Cleveland Ohio, has been at the forefront of infrared technology since 1957. This market leading technology has allowed Enerco to build
More informationFluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
More informationC-66 CUTTING TORCHES
INSTRUCTIONS for F-805-R May, 2001 C-66 CUTTING TORCHES Cutting Range using any fuel gas except acetylene... 1/8"-20" Cutting Nozzels... 1500 series Torch-Hose Connections... Oxy. CGA-022 (9/16" 18) F.G.
More informationMINITHERM THE FEATHERWEIGHT WELDING AND HEATING TORCH
MINITHERM THE FEATHERWEIGHT WELDING AND HEATING TORCH The MINITHERM torch range has been developed to meet the need of trade and industry for a small injector torch to handle special jobs. A large number
More informationPARTS, SERVICE & REPAIR BULLETIN
CA4- PARTS, SERVICE & REPAIR BULLETIN 400 SERIES HEAVY DUTY CUTTING ATTACHMENT, TIP SERIES Manual No: 0056-379 Issue Date: August 2, 203 Revision: AB VictorTechnologies.com Table of Contents SECTION :
More informationValve with Integrated Pressure Regulator for medical OXYgen
Valve with Integrated Pressure Regulator for medical OXYgen Handling and performing ALL IN ONE solution Compact and light design User friendly Suitable for home care, intensive and baby care Use for oxygen,
More informationOwner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s
More informationPilot HON 625. Entwurf. Product information. serving the gas industry worldwide
Pilot HON 62 Entwurf Product information serving the gas industry worldwide Pilot HON 62 Application, characteristics Application Pilot for the gas pressure regulator HON 02 Pilot for outlet pressure control
More informationEquipment Specification MK73 FS Flame Spray System
Equipment Specification MK73 FS Flame Spray System TYPICAL SYSTEM CONFIGURATIONS Pictured below is a range of typical system configurations. Variations of these configurations may be possible. For some
More informationInstruction manual. for. high purity gas pigtails 200 bar / 300 bar
Instruction manual for high purity gas pigtails 200 bar / 300 bar Contents Contents... 2 1. Preface... 3 1.1 Overview... 3 1.2 General... 3 1.3 Intended use... 4 1.4 Personnel requirements... 4 2. For
More informationAbout. providing superior performance and reliability. Bromic regulators are AGA or UL144 approved.
REGULATORS 1 About Bromic Plumbing & Gas provide a wide variety of regulators to suit applications from recreational to professional, in both Natural Gas & LPG (propane). Our range of regulators includes
More information