Safety: blah, blah, blah, yawn, yawn, zzzzzzz
|
|
- Lambert Charles
- 6 years ago
- Views:
Transcription
1 Number of Incidents Safety Services Introduction to Health and Safety David Widdowson Director, Safety Services Office Safety: blah, blah, blah, yawn, yawn, zzzzzzz Boring & Dry subject Impinges on fun & excitement Time consuming & bureaucratic Good practice avoids pain & sustains activities Reducing risk not eliminating risk Reasonable & practical Health and Safety at Work Act 974 Health and Safety Organisation Council 2.() It shall be the duty of every employer to ensure, so far as is reasonably practicable, the health, safety and welfare at work of all his employees. 3.() It shall be the duty of every employer to conduct his undertaking in such a way as to ensure, so far as is reasonably practicable, that persons not in his employment who may be affected thereby are not thereby exposed to risks to their health or safety. Vice-Chancellor Registrar Head of Department or Head of Office (Senior Managers) Line Managers Health & Safety Management Group Departmental Safety Officer Lines of responsibility Lines of advice Health & Safety Committee Director of Safety Services University of Leicester Types of injury accidents: Totals Universities Safety Association Statistics Staff total injury rates Institutions 400 Falls on level Handling Striking against Sharps Struck by Other Falls on stairs Hot/cold contact Spillage Animals Falls from Hand Machinery Electricity 50 height Tools Poisoning/ Explosio Fire Infection Traffic Diseases ns 0 A B C D E F G H I J K L M N O P Q R S T Incident Code
2 Universities Safety Association Statistics Staff reportable injury rates Institutions major minor no injury fatal or serious minor Accident Ratio Studies Heinrich (950) (USA) Bird (969) (USA) serious minor property damage no injury/damage first aid property damage no injury/damage Tye/Pearson (974/75) (British industry) Leicester - Average Number of Accidents Reported Annually Accident Causation Heinrich s Theory (93) People not things cause accidents All accidents involve a complicated sequence of factors Most causes are either:- unsafe acts, or unsafe conditions Industrial injuries only result from accidents Accident = Uncontrolled Occurrence Resulting in - Unsafe Acts Personal Injury Property Damage Both All accidents are caused- Outcome governed by luck Removal of cause prevents accidents 2
3 Unsafe Acts Unsafe Conditions Unsafe Conditions 3
4 4
5 Incidents; accidents, cases of ill-health, materials and equipment damage, near misses etc. Definitions Reactive Monitoring Risk Assessment Active Monitoring Hazard The potential to cause harm Trend analysis Investigation following incidents etc. Corrective action Workplace precautions, risk control systems, protective and preventive measures etc. Inspections, safety sampling etc Corrective action Trend analysis Risk The likelihood and the consequence of the hazard potential being realised (Likelihood x Consequence) Review Continuous improvement Hazards Falls Use of machines Fire Drowning Explosions Compressed gases Biological agents Ionising radiation Hand tools Chemicals Confined spaces Manual handling Operation of vehicles Electricity Excavation work Hot/cold surfaces Noise GM organisms Non-ionising radiation Adverse weather Stacking Mechanical lifting Basic Accident Prevention. Remove 2. Replace 3. Guard 4. Warn 5. Protect Preventative measures should ALWAYS follow this priority sequence 5
6 Dos and Don ts Read the Departmental Safety Manual & abide by it's requirements Read experimental protocols carefully. If you do not understand any of the procedures ask questions. Do not exceed your competence. If you are not sure how to use equipment, seek further advice and instruction. Obey all access restrictions. Know what to do in an emergency. Wear personal protective equipment as required. Work tidily Report all accidents Always consider your own safety and that of your colleagues. Safety Services Staff Director: Dr. David Widdowson Radiation Safety Officer: Mr. John Scott Fire Safety Officer: Mr. Stephen Pinsent Biological & Chemical Safety Officer: Dr. Sarah Nelson Safety Officer Mr. Duncan Langford Administrative Assistant Miss Rebecca Vickerman (229) Safety Services 6
Compensation claims: Why do companies lose claims? Nicola Lashmar Principal Associate Barrister Eversheds LLP 4 July 2012
Compensation claims: Why do companies lose claims? Nicola Lashmar Principal Associate Barrister Eversheds LLP 4 July 2012 What we will cover: The law The duties owed by an employer absolute as far as is
More informationMarine Education Society of Australasia HAZARD MANAGEMENT POLICY
Marine Education Society of Australasia HAZARD MANAGEMENT POLICY Purpose of guidelines Commitment to workplace health and safety Scope Legal Framework MESA is committed to ensuring safe and healthy working
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationRisk Assessment Code of Practice
1. Introduction Risk Assessment Code of Practice The Management of Health and Safety at Work Regulations 1999 requires employers to carry out an assessment of the significant risks to the health and safety
More informationOccupational Health & Safety
Personal Development Level 3 Occupational Health & Safety Any injury particularly workplace injury is a major cause of concern for all involved in Occupational Health and Safety (OHS). The factors which
More informationIIUM EVENT SAFETY RISK ASSESSMENT
INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA HAZARD IDENTIFICATION OCCUPATIONAL WORKPLACE SAFETY, HEALTH AND BUILT ENVIRONMENT DEPARTMENT (OSHBE) PRESENTED BY: YBHG. DATO IR. SHAFFEI MOHAMAD IIUM EVENT SAFETY
More informationHazard and Risk Assessment Guide
Page 1 Safety legislation in Canada (Occupational Health & Safety Act, Sec. 25) entails employers to do everything that is reasonable to ensure their workers have a healthy and safe workplace. The first
More informationin Australian Workplaces
Copyright 2011 - OnGuard Safety Training Pty Ltd 1 of 7 in Australian Workplaces Introduction Part 2 Part 3 Part 4 Part 5 SafeWork SA Introduction Hazard identification is the process used to identify
More informationHAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
More informationManagement of risk. Definition of terms. Managing risks. Risk
Definition of terms Risk Management of risk Risk is the possibility that harm (death, injury or illness) might occur when exposed to a hazard. A hazard is anything with the potential to cause injury or
More informationCompliance with Health & Safety legislation
Compliance with Health & Safety legislation The following is a brief description of some of the main duties required by the more generic safety legislation applicable to businesses, which the employers
More informationCOSHH Hazardous Substances Health & Safety Management Standard Issue 2 (September, 2010)
COSHH Hazardous Substances Health & Safety Management Standard Issue 2 (September, 2010) Introduction This document contains corporate standards and guidance on the management of risks arising from the
More informationHazard Identification
Topic 4 Hazard Identification LEARNING OUTCOMES By the end of this topic, you should be able to: 1. Define hazard; 2. Describe the eight categories of workplace accidents; 3. Briefly explain the Hazard
More informationThis section is about the identification of those hazards, assessing how important they are and deciding what to do about them.
Managing Hazards An OHS management system provides a framework for managing safety. One part or element of the OHS management system deals with the management of the hazards in the shearing shed. This
More informationSafety Management System. Initial Revision Date: Version Revision No. 02 GENERAL SAFETY HEALTH PROVISION
Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 5 Purpose This program is written to be in compliance with local regulatory requirements and provide directives
More informationRISK MANAGEMENT. Siobhan Mulvenna, GIOSH, FCIPD
RISK MANAGEMENT Siobhan Mulvenna, GIOSH, FCIPD www.smt-solutions.com What is Risk Assessment? Like any other area of your business, health and safety needs to be properly managed. To do this you need to
More informationRISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992
RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992 PERSONNEL DIVISION REVIEWED AUTUMN 1999 CONTENTS Page 1 INTRODUCTION 1
More informationHealth and Safety is Managed
We believe Workplace accidents, illness and incidents are preventable provided that Health and Safety is Managed Finding Hazards 2 Job Hazards A job hazard is anything at work that can hurt you either
More informationInstructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading
Instructions for the Use of the Excel Spreadsheet There are Three tabs at the bottom of this worksheet Instructions tab is the one you are reading H&S Plan Tab The Plan Tab is the front cover pages of
More informationAccident Investigation and Hazard Analysis
Accident Investigation and Hazard Analysis June 18, 2015 Objectives: Accident Investigation Define accidents Review why accident investigations are important Review the purpose of accident investigations
More informationProcedure: Work health and safety hazard management
Procedure: Work health and safety hazard management Purpose This procedure describes how the Australian National University (ANU) manages Work Health Safety hazards for the health, safety, rehabilitation
More informationApplication 15.1 This Part applies to every workplace where a worker works in a confined space.
PART 15 CONFINED SPACES GENERAL REQUIREMENTS Application 15.1 This Part applies to every workplace where a worker works in a confined space. Safe work procedures 15.2(1) An employer must (a) develop and
More informationHazard Management Making your workplace safer
Hazard Management Making your workplace safer A Guide to Hazard Identification, Risk Assessment, Control and Reviewing 1 What is a hazard? A hazard is something which has the potential to harm the health,
More informationAccident/Incident Reporting and Investigation Procedures
Accident/Incident Reporting and Investigation Procedures Policy reference Workplace Health and Safety Policy Procedure reference Workplace Health and Safety Risk Assessment Procedures Procedure It is imperative
More informationAccidents and accident prevention
Accidents and accident prevention What is an accident? 1. Oxford Dictionary An unforeseeable event often resulting in injury. 2. British Safety Council A management error; the result of errors or omissions
More informationHealth and Safety Guidance
Health and Safety Guidance Risk Assessment GUIDANCE/17/RA/00 This document gives guidance on general risk assessment. It offers advice on planning risk assessments and on the steps involved in the complete
More informationCOMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3)
COMPLETION OF PROCEDURE ASSESSMENT FORM (COSHH RELATED) GUIDANCE NOTES (Version 3) The following guidance notes accompany the College Procedure Assessment form (COSHH-related). Please complete all applicable
More informationHazard Recognition. Leader s Guide and Quiz
Hazard Recognition Leader s Guide and Quiz 4831 INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order so that employees will see the relationships
More informationUniversity Safety Policy Supplement
Occupational Health and Safety Service, Kings Gate Newcastle upon Tyne NE1 7RU Tel 0191 208 6274 Document History University Safety Policy Supplement Lone working Approved October 2006 Re-ratified October
More informationA MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationAttachment 2 Risk Assessment Guidelines
Attachment 2 Risk Assessment Guidelines Contents Page 3: Page 6: Page 7: Page 8: Guidance on writing a risk assessment Blank risk assessment Possible hazards Risk assessment instruction recording form
More informationHazard Identification and Control
Hazard Identification and Control Steve Wallace steve@hcsas.sk.ca (306)729-4863 How our mind works Unintentional Blindness It s not what you look at it s what you see Brain is wired for biological movement
More informationUnderstanding Statutory Regulations and Organisational Safety Requirements within a Medical Engineering Environment
This unit has 5 learning outcomes Learning Outcomes Assessment Criteria The learner will: 1. Know how to comply with statutory regulations and organisational safety requirements relating to Health and
More information4 Staff Selection, Appraisal and Development. To prevent harm by identifying and controlling potential hazards.
OTAGO POLYTECHNIC MANAGEMENT POLICY Number: MP0403.04 Title: Hazard Management ITPNZ Standard: 4 Staff Selection, Appraisal and Development Chief Executive Approval: Approval Date: 17 Apr 12 Effective
More informationTECHNICAL INFORMATION SHEET 17. Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS
TECHNICAL INFORMATION SHEET 17 Revision 1 : 2016 MODEL RISK ASSESSMENT FOR THE MANUAL HANDLING OF GAS CYLINDERS Copyright 2016 by British Compressed Gases Association. First printed 2009. All rights reserved.
More information(Health, Safety, and Welfare)
An Appreciation of The Construction (Health, Safety, and Welfare) Regulations 1996 Course Notes Mark Mallen Health and Safety Manager Fenlock Hansen Ltd October 2002 The Construction Regs 1996: Version
More informationWILTSHIRE POLICE FORCE PROCEDURE
Template v6 WILTSHIRE POLICE FORCE PROCEDURE Vibration at Work Date of Publication: January 2018 Version: 4.0 Next Review Date: January 2021 TABLE OF CONTENTS PROCEDURE OVERVIEW... 3 GLOSSARY OF TERMS...
More informationCONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE
CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH PROCEDURE 1. INTRODUCTION The University uses substances hazardous to health in many of its operations, and accepts that it has a duty of care to reduce exposure
More informationAppendix C Health and Safety Guidelines for investigators
38 Appendix C Health and Safety Guidelines for investigators Introduction Investigations must be conducted in a safe manner. This document provides an overview of the health and safety guidelines investigators
More informationPOLICY FOR THE CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH)
POLICY FOR THE CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH (COSHH) INTRODUCTION & LEGISLATION Using chemicals or other hazardous substances at work can put people s health at risk. The law requires employers
More informationContractor / Exhibitor Handbook
Contractor / Exhibitor Handbook Health and Safety This booklet outlines the basic rules that must be followed by contractors and other visitors working on Live Promotions Events sites. The contractors
More informationHAZARD RECOGNITION EVALUATION & CONTROL. Procedure No. HR-405-PR-2 Division Human Resources. Supersedes n/a Board Policy Ref.
COLLEGE OF THE NORTH ATLANTIC OPERATIONAL PROCEDURE TOPIC: HAZARD RECOGNITION EVALUATION & CONTROL Procedure No. Division Human Resources Supersedes n/a Board Policy Ref. GP-GR-805 Related Policy HR-405
More informationRISK ASSESSMENT POLICY
RISK ASSESSMENT POLICY Document created: 30 April 2015, last modified: 12 May 2015 Next review: 30 April 2016 Sherfield School Risk Assessmemt Policy 2 RISK ASSESSMENT Purpose of this Section 1. The purpose
More informationPotential risk of injury to staff
Register Fire, Earthquake - other Emergencies Manual Handling and Repetitive Work Repetitive, Forceful Work Poor Housekeeping Not Wearing PPE (Personal Protective Equipment) Potential risk of injury to
More informationHazard Identification
Hazard Identification Bureau of Workers Comp PA Training for Health & Safety (PATHS) PPT-072-01 1 Hazard Detection & Inspection What is a hazard? What should I look for? How do I perform the inspection?
More informationPOLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT
POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT August 2017 Important Note: The Version of this policy found on the HR Connect web page is the only version that is controlled. Any other
More informationWorkplace Safety Inspection Sheet
Workplace Safety Inspection Sheet Record all details of a safety inspection carried out at your workplace 1 of 2 Date and Time of Inspection:... Area or workplace inspected:... Name(s) and signature(s)
More informationRISK ASSESSMENT: Education Directorate - basic guidance
RISK ASSESSMENT: Education Directorate - basic guidance The general duty of care requires that every person must have regard for the safety and health of themselves and for any other person who might be
More informationFACULTY OF EDUCATION LOW RISK HEALTH AND SAFETY FORM FORM B
FACULTY OF EDUCATION LOW RISK HEALTH AND SAFETY FORM FORM B Research Projects Date / / Faculty of Education Staff/Student No. Research Project Information Circle the appropriate research activity pertaining
More informationPOLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT
POLICY ON THE PROVISION & USE OF PERSONAL PROTECTIVE EQUIPMENT June 2013 Lead Manager John Green, Health & Safety Service Manager Responsible Director Director of Human Resources Approved By Health and
More informationInitial Hazard Specifics Gap Analysis for Fruit & Vegetable Processing
Initial Hazard Specifics Gap Analysis for Fruit & Vegetable Processing Answer the following questions to assist you in identifying the health and safety hazards associated with your processes: Section
More informationSafety in Precast Erection
Safety in Precast Erection C. Kirubakaran R Star Consultants Pte Ltd, Singapore Abstract: Construction industry is known to be one of the most hazardous among different industries all over the world. The
More informationWork Health and Safety Risk Management Procedures
Work Health and Safety Risk Management Procedures Table of Contents 1. Governing Policy 2. Purpose 3. Scope 4. Definitions 5. Responsibilities 6. Risk Management Process 6.1. Process summary 6.2. Hazard
More informationa) Accident/Incident investigation. REACTIVE MEASURE
General Risk Assessment In order to prevent workplace injury, disease or property damage, it is necessary to identify the causes of accidents and failures in management control, which can lead to such
More informationSafeLandUSA - Syllabus
1. Incident Reporting and Investigation Responsibility for reporting Definition of an incident to report How to report an incident Types of incidents Purpose of incident investigation Explain why incidents
More informationContractor Control Procedures. Contractor Control Procedures. Working Together. November Borders College 24/11/2014.
Working Together Contractor Control Procedures November 2014 Borders College 24/11/2014 1 Working Together 1. Introduction This procedure aims to control the health and safety of contractors working on
More informationSAFETY AUDITS: WHAT TO LOOK FOR TO ENSURE YOUR BUILDING IS REALLY SAFE. Presented by:
SAFETY AUDITS: WHAT TO LOOK FOR TO ENSURE YOUR BUILDING IS REALLY SAFE Presented by: Steve Wilder, BA, CHSP, STS Sorensen, Wilder & Associates Bradley, IL What is Safety Inspection A safety inspection
More informationa. identify hazardous conditions and potential accidents; b. provide information with which effective control measures can be established;
APPENDIX 2 TO ANNEX E TO SECTION 13 JOB HAZARD ANALYSIS PROCESS 1. The JHA process is an excellent starting point to evaluate the actual way a job is performed. This process may identify specific improvements
More informationCode of Practice and Instructions to Contractors Working for Viridor
Date of issue: 20 Code of Practice and Instructions to Contractors Working for Viridor Prepared by: Ian Powell Head of Safety Management 4.6.3 Revision: 2.0 Contents Introduction... 2 Legal obligations...
More informationHealth and Safety Policy
Snowflake School Policy Reviewed September 2018 To be reviewed September 2019 Roy English Health and Safety Policy 1. STATEMENT OF INTENT The Trustees of Snowflake School will take steps to meet their
More informationConfined Spaces. This procedure applies to all workers of the Diocese of Maitland Newcastle (DoMN).
Purpose To provide guidance in controlling the risks associated with confined spaces including identifying confined spaces, working in a confined space and issuing confined space entry permits. Scope This
More informationSAFE WORK METHOD STATEMENT SWMS No Version
SAFE WORK METHOD STATEMENT SWMS No Version Company Name: Hunter Readymixed Concrete Pty Ltd 00 004 Location: Thornton Cessnock Tea Gardens Gateshead ABN: 6 076 08 695 SWMS Developed By: Duane Harrison
More informationPART 4: IMPLEMENTATION
TITLE PART 4: IMPLEMENTATION & OPERATION Prepared by: 4.6 Basic Industrial First Aid Learning Objectives To define first aid. To state the purpose of first aid at workplace. To describe the first aid response.
More informationModule: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
More informationHealth & Safety Policy 1
St Stephen in Brannel Parish Council Mrs Linda Ranger - Clerk and RFO E-mail: clerk@ststepheninbrannel-pc.org.uk www.ststepheninbrannel-pc.org.uk Office 2, Brannel Room 22 Fore Street, St Stephen St Austell,
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationTHE UNIVERSITY OF SHEFFIELD ACCIDENT AND INCIDENT REPORTING AND INVESTIGATION POLICY AND PROCEDURES
THE UNIVERSITY OF SHEFFIELD ACCIDENT AND INCIDENT REPORTING AND INVESTIGATION POLICY AND PROCEDURES Page 1 of 10 Document Created November 2012 CONTENTS Page No 1 INTRODUCTION 3 2 REPORTING ACCIDENTS,
More informationWorking safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
More informationRisk Assessment. 1.3 This procedure outlines the process of undertaking a Risk Assessment in the University.
1 PURPOSE Risk Assessment 1.1 The Management of Health and Safety at Work Regulations require an assessment of the work related risks to employees, students, visitors and members of the public arising
More informationEMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
More informationOur commitment to safety
2 Our commitment to safety At South East Water, we have an absolute commitment to achieving and maintaining a safe and healthy workplace for our people, including our contractors and stakeholders which
More information-JHA- Job. For Science and Engineering. Hazard Assessment
-JHA- For Science and Engineering Job Hazard Assessment Is a Job Hazard Assessment Necessary? The Occupational Safety and Health Administration regulations confirm a JHA is needed. OSHA 1910.132(d)(2)
More informationWe also ask our subcontractors and partners to. At EHS Support we re passionate about safety. The. ensure the safey of themselves, their coworkers and
Golden Rules of Safety July 2014 EHS Support s commitment to environmental, health, At EHS Support we re passionate about safety. The We also ask our subcontractors and partners to ensure the safey of
More informationSAFETY DIRECTIVE. 2.0 DEPARTMENTS AFFECTED This directive applies to all departments and employees of the Town of Marana.
SAFETY DIRECTIVE Title: Safety Signs and Accident Prevention Tags Issuing Department: Town Manager s Safety Office Effective Date: September 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action:
More informationB S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
More informationMobile Training Unit (MTU)
Mobile Training Unit (MTU) The MTU provides a convenient way of meeting training requirements by bringing a range of short duration health & safety and operative training onsite. Through the MTU, employees
More informationAPPENDIX A: Risk Assessment for all activities at Farm
APPENDIX A: Risk Assessment for all activities at Farm Sheet No...of...... Drafted by Nick Laister Date of Revision: January 08 Location: Southcombe, Chipping Norton Heading: General Organisation L C R
More informationSection 5: Hazard Identification ( version)
Section 5: Hazard Identification (2010.06.16 version) 5.1 Introduction Purpose The hazard assessment process is a system to identify health hazards, occupational factors or illnesses, arising in and from
More informationWorking Alone Safety Program
Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Working Alone Safety Program Prepared
More informationHS329 Risk Management Procedure
HS329 Risk Management Procedure Work Health and Safety Act 2011 Policy hierarchy link Work Health and Safety Regulation 2011 Work Health and Safety Policy Code of Practice How to Manage Work Health and
More informationSafe Work Method Statement
Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationTHE CONSTRUCTION (HEALTH, SAFETY AND WELFARE) REGULATIONS 1996
A G U I D E T O THE CONSTRUCTION (HEALTH, SAFETY AND WELFARE) REGULATIONS 1996 C ONSTRUCTION (H EALTH, S AFETY AND W ELFARE) C INTRODUCTION The Construction (Health, Safety and Welfare) Regulations 1996
More informationThere is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There
More informationTITLE. Prepared by: 4.6 Basic Industrial First Aid
TITLE PART 4: IMPLEMENTATION & OPERATION Prepared by: 4.6 Basic Industrial First Aid Learning Objectives To define what is first aid. To state the purpose of first aid at workplace. To demonstrate the
More informationLone Working Guidance for University Departments and Functions December 2009 Safety Services Office
Lone Working Guidance for University Departments and Functions December 2009 Safety Services Office Introduction Lone working is not covered by any specific piece of legislation and, indeed, there is no
More informationNewtown Neighbourhood Centre
Policy Name Policy Number 1.10.1.1 Relevant procedures Work Health and Safety All procedures relating to the health, safety and well being of individuals in the workplace are relevant to this policy. Author
More informationEHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
More informationHealth and Safety Management System Template
July 2017 Health and Safety Management System Template A health and safety system template for quarry operations Contents 1 Using This Template 2 2 What Are Our Legal Requirements 3 3 Health and Safety
More informationPage 1 of 5 UC Santa Barbara Policy 5400 Policies Issuing Unit: Administrative Services Date: June 1, 1989 ENVIRONMENTAL HEALTH AND SAFETY I. REFERENCES (Available at the Environmental Health and Safety
More informationAPPENDIX 1: HAZARD IDENTIFICATION and RISK ASSESSMENT PRO-FORMAS
FSC Operational Codes of Practice 7 July 2006 No 9: Risk Assessments Page 1 of 5 Appendix 1: Hazard Identification & Risk Assessment Pro-formas APPENDIX 1: HAZARD IDENTIFICATION and RISK ASSESSMENT PRO-FORMAS
More informationWhat is reportable? What is reportable under RIDDOR? Reportable deaths and major injuries. Deaths. Major injuries
What is reportable? What is reportable under RIDDOR? Deaths and major injuries Over-three-day injuries Disease Dangerous occurrences (near misses) Gas incidents Reportable gas incidents What is reportable
More informationSAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030
SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030 HIGH RISK APT AM Holdings Pty. Ltd. [ABN] 95124754383 Principal Contractor (PC) APA Group Level 19, HSBC Building 580 George
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More informationRISK ASSESSMENT FOR THE CHIMERA CLIMBING CENTRE DATE LAST UPDATED: 25 AUGUST STUART HOWARD
ASSESSMENT FOR THE CHIMERA CLIMBING CENTRE DATE LAST UPDATED: 2 AUGUST 201 - STUART HOWARD ASSESSMENT PROCESS: Likelihood of occurrence x Severity, L X S Likelihood of occurrence 1 Highly unlikely to ever
More informationSafe work method statements
Information about Safe work method statements How to prepare and use a safe work method statement (SWMS) for high risk construction work (HRCW) and who needs to prepare one. October 2018 Key concepts Hazard
More informationHealth & Safety Policy HSP 08 Control of Substances Hazardous to Health (COSHH) Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 08 Control of Substances Hazardous to Health (COSHH) Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review
More informationLaboratory Safety Manual Prepared by RAEIN-Africa & Partners. Under the Implementation of The National Biosafety Framework Project for Swaziland
Laboratory Safety Manual Prepared by RAEIN-Africa & Partners Under the Implementation of The National Biosafety Framework Project for Swaziland Contents Preamble/ Introduction... 2 Safety declaration...
More informationRISK ASSESSMENT HAZARD IDENTIFICATION AND RISK ASSESSMENT METHODOLOGY
RISK ASSESSMENT HAZARD IDENTIFICATION AND RISK ASSESSMENT METHODOLOGY A) RISK Risk concerns the deviation of one or more results of one or more future events from their expected value. Risk related to
More information