Material Safety Data Sheet Date of the issue: 02/05/2007 No. Page: 5

Transcription

1 Material Safety Data Sheet Date of the issue: 02/05/2007 No. Page: Substance/product and the manufacturer/importer identification: Product identification: Compressed mineral jointing sheets (asbestos free) Name: UNIGRAPH 500 and UNIGRAPH UNIMETAL CAS no. : n/a ES no. : n/a Company address: FMI S.p.A. Via Taranto 10/ Palazzolo s/o ( Brescia ) ITALY Tel./fax : / Information on ingredients: The product contains the following hazardous materials Chemical name CAS No. ESNo. Content (%) 1. Graphite 2. PET 3. Polyethylene base coating No CAS No. assigned S phrase : (S 36/37) wear suitable protective clothes and gloves 9098% 1 3,5 % 1 3,5 % 3. Hazards identification: Product does not release hazardous materials in normal use, thermal decomposition in a fire may release toxic gases, fabrication may release graphite dusts which may be harmful if inhaled or if contact is made with skin or eyes. Effects of overexposure: Acute: High concentration of graphite or PET dusts may be irritating to the eyes, skin, mucous membranes and respiratory tract. Chronic: Inhalation of high concentrations of graphite dusts over prolonged periods of time may cause pneumoconiosis. Preexisting pulmonary disorders, such as emphysema, may possibly be aggravated by prolonged exposure to the high concentrations of graphite dusts. Page 1of 5

2 Physicals Hazards: Graphite dusts are electrically conductive. Accumulations of dusts may cause shorting of electrical circuits First aid measures: Inhalation: For overexposure to fumes or particulate matter, remove the exposed person to fresh air. If breathing is difficult, oxygen may be administered. Seek medical attention. If breathing has stopped, artificial respiration should be started immediately. Skin: If material gets on the skin, wash thoroughly with mild soap and water. Seek medical attention if irritation develops or persist. Dermatitis should be treated symptomatically by a doctor. Eyes: If irritation occurs, do not rub the eyes. Flush eyes with water for at list 15 minutes. Ingestion: Ingestion is unrealistic. Firefighting measures: The products are noncombustible and do not pose fire hazard. However, packaging material may burn. Suitable extinguishing media: Water, foam, carbon dioxide or dry powder Extinguishing media which must not be used for safety reasons: None Combustion products: Carbon dioxide, carbon monoxide, nitrogen oxides and trace gases. Special protective equipment for firefighters: Independent respiratory protection to prevent fume/gas inhalation in poorly ventilated areas Accidental release measures: Personal precautions: No special precautions are required. Environmental precautions: No special precautions are required Handling and storage Handling: Unpack material at application site to avoid unnecessary handling of product. Keep work areas clean. Scrap material and debris dispose in suitable containers. Ensure good ventilation. Local exhaust ventilation may be required if the method of use produces dust levels that exceed the maximum exposure limit. Promptly clean up any spills that may occur Any dust generated during handling should be cleaned up by wet mopping or vacuuming Page 2 of 5 2

3 7.2 Storage: Before use keep material in original packaging. Store material in areas where it is protected against adverse conditions including precipitation Exposure controls/personal protection: Local regulations may apply. Engineering measures: In work areas ensure good ventilation. Control parameters: Local regulations may apply for fibre dust particle concentration per 1 ml of workplace air. Respiratory protection: In the even of heavy dust development and in confined spaces, use disposable facemasks. Hand protection: Gloves are recommended only. Hand protection is not essential while handling with the aforesaid product. Eye protection: With heavy dust development, wear safety goggles. Skin protection: Wear just the regular work clothing it is recommended to wash and change cloth once the working time is finished. 9. Physical and chemical properties: Appearance Odour Boiling point: Melting point: Flash point: Flammability: Autoflammability: Explosive properties: Oxidising properties: Solubility water: Vapor density solid black / gray colour not applicable graphite 3000 C nondeterminable immeasurable negligible not applicable 10. Stability and reactivity Stability: The fibre is resistant to chemicals and heat. Conditions to avoid: Strong oxidixing agents. Hazardous decomposition products: See section 5. Page 3 of 5 3

4 Toxicological information: Graphite oral LD 50 rat > 5 g/kg No hazard is probable. 12. Ecological information Stable product with no known adverse environmental effect, Is insoluble in water Disposal considerations Uncontaminated product/material If the material cannot be used or recycled, it can be disposed as a solid waste in a suitable installation subject to local regulations. Contaminated product: The contaminated or empty containers must be disposed similarly as their content. Transport information: Declaration about the surface, sea and air transport The product is not dangerous substance in terms of national and international transport guidelines. Other information: Keep in dry. Store separately from food Regulatory information: EC Classification: The product does not comply with any either chemical or harmful substances classification. Note: The marking of uniform materials is discussed with local authorities. Other regulations: No special marking is required by EEC standards Other information Health aspects: Safety in Use of Mineral and Synthetic Fibres, Occupational Safety and Health Series, International Labour Office (ILO) Good working practice: Local regulations may apply Declaration: Page 4 of 5 4

5 This Material Safety Sheet contains the information which are necessary for ensuring the safety of work, health and environment protection. The information given herein is the best available on the date of its issue and comply with the local legal regulations. However, it does not constitute a contractual description of suitability and usability of the product for a particular application. This information is furnished as a guide only and upon the condition that the person receiving it shall make tests to determine the accuracy and suitability of these data for his/her own particular way of application. Page 5 of 5 5