Dynisco SPX Industrial (2280/2281) Series

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Dynisco SPX Industrial (2280/2281) Series"

Transcription

1 From lab to production, providing a window into the process Dynisco SPX Industrial (2280/2281) Series Smart General Purpose Pressure Sensors Description The Dynisco SPX228X is an all welded construction smart industrial 4-20mA pressure transmitter designed for use in hazardous locations. Models are available in PSIG, PSIA, and PSIS. Optional pressure fittings and electrical terminations are available. Features 4-20mA loop-powered output +/- 0.25% accuracy available Wide selection of pressure ranges available Turndown 3:1 Configurations available for use in hazardous locations Remotely configurable via HART TM Precise, repeatable pressure measurements Output supplied directly to DSC or PLC Meets CE requirements CE ATEX Intrinsically Safe Approved FM Explosion Proof Approved CSA Explosion Proof Approved SIL 2 Certified (Pressure Output) PL'c' Certified (Relay Output) Additional approvals are available

2 Smart General Purpose Pressure Sensors for Hazardous Locations Performance Characteristics SPX2280 & SPX2281 Output Input Voltage Accuracy Accuracy is defined as the combined error expressed as a percentage of full scale output with the specifications of: Electronics ambient temperature, capillary of <= 36"; DyMax coated 15-5 SST diaphragm; Best Straight Line (BSL) %FS, per ISA-37.1 Consult Factory for availability and specifications of other configurations ma, with optional HART Vdc (Std); Vdc (ATEX IS) 2280 ± 0.5% 2281 ± 0.25% Repeatability ±0.1% Rangeability 3:1 Turndown Over Pressure 1.5 x FSO; ,000 psi 1.2 x FSO; 35,000-72,500 psi Zero Balance Adjustment Range ±5% FSO Maximum Load Resistance Vdc, 1, Vdc Electronics Ambient Temperature 70 F (20 C) Operating Temperature -20 to 185 F (-29 to 85 C) Compenstated Temperature Range 0 to 150 F (-18 to 65 C) Span Shift (Temp Change) All Models: 0.02% F.S./ F max (0.04% F.S./ C max) Zero Shift (Temp Change) Burst Pressure All Models: 0.01% F.S./ F max (0.02% F.S./ C max) 250 psi: 10 X FSO 500-3,000 psi: 5 X FSO 5,000-10,000 psi: 3 X FSO 15,000-30,000 psi: 2.5 X FSO 40, ,500 psi: 1.5 X FS Mechanical Characteristics Standard Wetted Parts 15-5 PH & 17-4 PH SST Approvals & Certifications CE ATEX IS SIL 2 (pressure output) & PL'c' (relay output) FM & CSA Explosion Proof Additional Approvals are Available

3 Smart General Purpose Pressure Sensors for Hazardous Locations Ordering Guide for Models SPX2280 & SPX XXX X X X XX X X XX X XXXX Approval E = Explosion Proof S = ATEX/Intrinsically Safe N = No Approvals Pressure Reference E = Absolute Pressure (Bar) N = Absolute Pressure (Kgf/cm 2 ) H = Absolute Pressure (KPa) R = Absolute Pressure (MPa) A = Absolute Pressure (PSI) B = Gage Pressure (Bar) K = Gage Pressure (Kgf/cm 2 ) C = Gage Pressure (KPa) M = Gage Pressure (MPa) G = Gage Pressure (PSI) D = Sealed Pressure (Bar) L = Sealed Pressure (Kgf/cm 2 ) F = Sealed Pressure (KPa) P = Sealed Pressure (MPa) S = Sealed Pressure (PSI) Process Connection A = 1/8-27 NPTF Internal B = 1/4-18 NPTF Internal C = 7/16-20 UNF Internal D = F-250-C Autoclave E = 1/4-18 NPTF External F = 1/2-14 NPTF External G = 7/16-20 UNF External H = R1/4 Metric K = 3/4-16 UNF External L = 1/2-14 BSP External M = 1/2-14 NPSM External N = F-562-C Autoclave P = 1 BSP Internal R = F-375-C Autoclave Model Pressure Units B = BAR C = KPa K = Kgf/cm 2 M = MPa P = PSI Wiring Connections 4 = 2 Wire Conduit 5 = 2 Wire Connector Option Code Communications A = No Protocol B = HART TM Protocol Pressure Range 13= 250 psi 17.5 Bar 17.5 Kgf/cm 2 MPa 14 = 500 psi 35 Bar 35 Kgf/cm MPa 15 = 750 psi 50 Bar 50 Kgf/cm 2 5 MPa 16 = 1,000 psi 70 Bar 70 Kgf/cm 2 7 MPa 17 = 1,500 psi 100 Bar 100 Kgf/cm 2 10 MPa 20 = 3,000 psi 200 Bar 200 Kgf/cm 2 20 MPa 21 = 5,000 psi 350 Bar 350 Kgf/cm 2 35 MPa 22 = 7,500 psi 500 Bar 500 Kgf/cm 2 50 MPa 23 = 10,000 psi 700 Bar 700 Kgf/cm 2 70 MPa 24 = 15,000 psi 1,000 Bar 1,000 Kgf/cm MPa 25 = 20,000 psi 1,400 Bar 1,400 Kgf/cm 140 MPa 27 = 30,000 psi 2,000 Bar 2,000 Kgf/cm MPa 28 = 35,000 psi 2,400 Bar 2,400 Kgf/cm MPa 29 = 40,000 psi 2,700 Bar 2,700 Kgf/cm MPa 30 = 50,000 psi 3,500 Bar 3,500 Kgf/cm MPa 31 = 60,000 psi 4,200 Bar 4,200 Kgf/cm MPa 32 = 72,500 psi 5,000 Bar 5,000 Kgf/cm MPa Electrical Connections AC = PT1H-10-6P Connector CA = 1/2-14 NPT Conduit with 42" Leads AF = PCIH-12-8P Connector Threaded Style 1 Other configurations are avaialble. Please consult factory.

4 Smart Gereral Purpose Pressure Sensors for Hazardous Locations Drawing SPX2280 ZERO Z DO E x NOT 7/8 in. (FLATS) WAR R E MOV E N S EA L Alignment Flat IN G S S C RE W S SPAN VIEW A-A 3 - Conductor 5 - Conductor Cable Wiring Color Function RED E+ BLACK E- GREEN GROUND ORANGE Rcal + BLUE Rcal - -A Ftg = 5-20,000 PSIG -B Ftg = 5-20,000 PSIG -C Ftg = 5-10,000 PSIG -D Ftg = 5-60,000 PSIG Where; -R Ftg = 5-60,000 PSIG Fitting - R (and Fittings A thru D) (PRESSURE LISTED ABOVE) 18 AWG STRANDED, CABLE WIRE 1/2-14 NPT 7/8 FLATS LEAD LENGTH (42 in., std (107cm) mm mm END FITTING (SEE CHART) END FITTING ±.12 (3.1mm) (139.2 mm) Fitting - E Fitting - F Fitting - G (5-7,500 PSIG) Fitting - H Fitting - L (1,000-40,000 PSIG) 12.7mm mm mm mm mm 1.27mm O-RING GROOVE K265 OPT.ONLY Fitting - M mm 1-1/8 HEX mm Fitting - N Fitting - K (INCLUDES PSIS & PSIG) mm 25.5mm mm 2.4mm () Fitting - P.75 19mm (12.7mm) (1,000-30,000 PSIG) 2.05 HEX (52mm) Pressure Fitting Quick Reference Suffix DESCRIPTION TYPE -- A 1/8-27 NPTF -- B 1/4-18 NPTF -- C MS D F-250-C -- E 1/4-18 NPTF -- F 1/2-14 NPTF Conduit ftg -- G MS H R 1/4 -- K 3/4-16 UNF EXT. Thread -- L 1/2-14 BSP -- M 1/2-14 NPSM -- N F-562-C -- P 1" BSP -- R F-375-C.59 15mm 14mm mm

5 Smart Gereral Purpose Pressure Sensors for Hazardous Locations Drawing SPX2281 ZERO Z DO E x NOT WAR R E MOV E N S EA L Alignment Flat IN G S S C RE W S SPAN VIEW A-A 3 - Conductor 5 - Conductor RED E+ BLACK E- GREEN GROUND ORANGE Rcal + BLUE Rcal - -A Ftg = 5-20,000 PSIG -B Ftg = 5-20,000 PSIG -C Ftg = 5-10,000 PSIG -D Ftg = 5-60,000 PSIG Where; -R Ftg = 5-60,000 PSIG Fitting - R (and Fittings A thru D) (PRESSURE LISTED ABOVE) 18 AWG STRANDED, CABLE WIRE 1/2-14 NPT 7/8 FLATS LEAD LENGTH (42 in., std (107cm) mm mm END FITTING (SEE CHART) END FITTING ±.12 (3.1mm) (139.2 mm) Fitting - E Fitting - F Fitting - G (5-7,500 PSIG) Fitting - H Fitting - L (1,000-40,000 PSIG) 12.7mm mm mm mm Fitting - K (INCLUDES PSIS & PSIG) mm mm 1.27mm 1-1/8 HEX mm Fitting - N O-RING GROOVE K265 OPT.ONLY mm 25.5mm mm 2.4mm () Fitting - M Fitting - P (12.7mm).75 19mm (1,000-30,000 PSIG) 2.05 HEX (52mm) Pressure Fitting Quick Reference Suffix DESCRIPTION TYPE -- A 1/8-27 NPTF -- B 1/4-18 NPTF -- C MS D F-250-C -- E 1/4-18 NPTF -- F 1/2-14 NPTF Conduit ftg -- G MS H R 1/4 -- K 3/4-16 UNF EXT. Thread -- L 1/2-14 BSP -- M 1/2-14 NPSM -- N F-562-C -- P 1" BSP -- R F-375-C.59 15mm 14mm mm

6 REV ECO BY APP DATE A TP LEB 07/29/16 PIN H S Z 8 - PIN PC O-RING WITH PUSH BUTTONS PCIH-12-8P GUARDIAN CONNECTOR WIRING PIN FUNCTION A POWER + B SIGNAL - C POWER - D NO CONNECTION E Rcal - F Rcal + G RELAY CONTACT H RELAY CONTACT PIN A PIN B PIN A PIN B PIN A PIN B PIN H PIN H 8 - PIN PC WELDED WITH PUSH BUTTONS PCIH-12-8P 8 - PIN PC WELDED WITH HALLS PCIH-12-8P NOTE: 1. THESE CONNECTOR OPTIONS ARE AVAILABLE ON MOST OF THE CONFIGURATIONS SHOWN ON THE PREVIOUS SHEETS. TOLERANCES UNLESS OTHERWISE SPECIFIED; 1. 2 PLACE DECIMAL ±.01 3 PLACE DECIMAL ± FRACTIONS ± 1/32 3. DRILLS < 0.5 DIA 4. ANGLES ± DIA 5. FILLETS R.005 MAX 6. EDGES R.005 OR CHAMFER MAX 7. PART TO BE FREE OF BURRS 8. ALL DIMENSIONS ARE IN INCHES. MODEL NO. MATERIAL x x DO NOT SCALE DRAWING TITLE DRAWN CHECKED APPROVED FINISH GUARDIAN SERIES CONNECTORS TP DATE 7/27/16 DATE LEB DATE 7/27/16 63 EXCEPT AS MAY BE OTHERWISE PROVIDED BY CONTRACT, THESE DRAWINGS AND SPECIFICATIONS ARE THE PROPERTY OF DYNISCO, ARE ISSUED IN STRICT CONFIDENCE, AND SHALL NOT BE REPRODUCED OR COPIED, OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS WITHOUT PERMISSION. SIZE B SCALE FORGE PARKWAY, FRANKLIN MA DWG. NO NONE Instruments 1 SHEET OF REV A 1 R >

7 2016. Dynisco reserves the right to make changes without notice. Refer to for access to Operator Manual and other support documentation. PN: DSSPX228081SERIES REV: 0716 ECO: Dynisco Hotline Dynisco Dynisco Europe, GmbH Dynisco Shanghai 38 Forge Parkway Pfaffemstr. 21 Phone Building 7A, No. 568 Phone Franklin, MA Phone Hellbronn Fax Longpan Rd Malu Toll Free USA Fax Germany Jiading, China Fax

APG. Intrinsically Safe, Heavy Duty Pressure Transducer Series: PT-400

APG. Intrinsically Safe, Heavy Duty Pressure Transducer Series: PT-400 Intrinsically Safe, Heavy Duty Pressure Transducer Series: PT-400 C US The PT-400 offers high accuracy and reliability over a wide range of pressures. The small size, integrated electronics, wide operating

More information

ATM.1ST. Pressure transmitters CUSTOMER BENEFITS

ATM.1ST. Pressure transmitters CUSTOMER BENEFITS Pressure transmitters ATM.1ST CUSTOMER BENEFITS High precision pressure sensor over the whole temperature range Electronic compensation Modular sensor structure (any process and electrical connections

More information

9700 Transmitter Submersible hydrostatic level transmitter

9700 Transmitter Submersible hydrostatic level transmitter Specification sheet IP0078 October 2007 Level 9700 Transmitter Submersible hydrostatic level transmitter Description The 9700 series hydrostatic level transmitter is designed to perform in the most arduous

More information

UNIK 5600/5700 Marine Certified Pressure Sensing Platform

UNIK 5600/5700 Marine Certified Pressure Sensing Platform GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.

More information

Melt Pressure Measurement: Environmental Effects

Melt Pressure Measurement: Environmental Effects From lab to production, providing a window into the process Melt Pressure Measurement: Environmental Effects Introduction The Need for Pressure Measurement in Extrusion In order to maintain the dimensional

More information

3.0 Pressure Transmitter Selection

3.0 Pressure Transmitter Selection 3.0 Pressure Transmitter Selection Each Tronic Line pressure transmitter has different features to meet specific performance, environmental, and price requirements. It is not possible to describe every

More information

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.

More information

Programmable pressure and temperature transmitters PTM/RS485

Programmable pressure and temperature transmitters PTM/RS485 Programmable pressure and temperature transmitters PTM/RS485 Version: 03-28-2012 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x

More information

PT-400 User Manual APG

PT-400 User Manual APG PT-400 User Manual APG R Doc #9002825 Rev D1, 11/17 Table of Contents Introduction... iii Warranty Statement... iv Chapter 1: Specifications and Options... 1 Dimensions...1 Specifications... 2 Model Number

More information

Series INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN

Series INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II

More information

Pressure Measurement Single-range transmitters for general applications

Pressure Measurement Single-range transmitters for general applications Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials

More information

KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media

KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media FEATURES 50 mbar to 400 bar, 5 to 6000 psi gage or absolute pressure For many industrial gases and liquids 00, 0545, 05, 6 or 40 ma output Field interchangeable EMC according to EN 66-8 MEDIA COMPATIBILITY

More information

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø

More information

P900. P900, Datenblatt Seite 1 DESCRIPTION

P900. P900, Datenblatt Seite 1 DESCRIPTION , Datenblatt Seite 1 Field proven rugged construction High overpressure capability High reliability for demanding environments Application specific customization Excellent media compatibility Shock and

More information

Programmable pressure and temperature transmitters PTM/RS485

Programmable pressure and temperature transmitters PTM/RS485 Programmable pressure and temperature transmitters PTM/RS485 Version: 26.06.2014 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x

More information

IPH 2 & IPX 2. Features Type 4X & Explosion-Proof Current-to-Pressure (I/P) Transmitters. Approved for Use with Natural Gas.

IPH 2 & IPX 2. Features Type 4X & Explosion-Proof Current-to-Pressure (I/P) Transmitters. Approved for Use with Natural Gas. February 2018 Description These 2-wire (loop-powered) I/P transmitters accept a current signal (such as 4-20mA) from a DCS, PLC or PC-based control system. They convert the current signal to a pneumatic

More information

ETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. Type: ETd 04. class 0.05

ETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor.  Type: ETd 04. class 0.05 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 100 mbar up to 0... 400 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing

More information

Additel 761 Automated Pressure Calibrators

Additel 761 Automated Pressure Calibrators Automated Calibrators UPDATED Fully automated pressure calibrator with built-in pressure generator / controller to as high as 600 psi (40 bar) or as low as 0.01 Pa (0.00004 inh 2 O) accuracy Dual pressure

More information

How to specify a product. Process Sensors and Mechanical Instruments

How to specify a product. Process Sensors and Mechanical Instruments How to specify a product Process Sensors and Mechanical Instruments Keep the overview. Here is some guideline information on how to specify our products. Intended as supplementary help to specification

More information

ED 701 Hygenic Pressure Transmitter

ED 701 Hygenic Pressure Transmitter ED 701 Hygenic Pressure Transmitter Hygienic process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response time < 25 ms (Option

More information

Additel 761 Automated Pressure Calibrators Selection Guide

Additel 761 Automated Pressure Calibrators Selection Guide / Process Calibration Equipment Automated Calibrators Selection Guide Model Features Range Module 1 761-LLP 761-D 761-L 761-LA 761-M 761-MA 761-H 761-HA 761-BP -2.5 to 2.5 mbar (-1 to 1 inh 2 O) -0.95

More information

SSL. Smart Valve Positioner.

SSL. Smart Valve Positioner. Smart Valve Positioner Smartest valve control device meeting a dynamic performance and a precise setting with a piezoelectric technology and an optimized auto-calibration program Features Auto-Calibration

More information

Pressure Measurement Single-range transmitters for general applications

Pressure Measurement Single-range transmitters for general applications Siemens AG 07 Overview Function U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/ Equipotential bonding Diaphragm The pressure

More information

RPS/DPS High Accuracy Resonant Pressure Sensor. GE Oil & Gas. Features:

RPS/DPS High Accuracy Resonant Pressure Sensor. GE Oil & Gas. Features: GE Oil & Gas RPS/DPS 8100 High Accuracy Resonant Pressure Sensor Since 1972, Druck has manufactured precision pressure sensors with a capability to meet critical applications in industrial, aerospace,

More information

For Multi-Parameter Meters see mvx

For Multi-Parameter Meters see mvx Design Features VORTEX IN-LINE FLOW METERS For Multi-Parameter Meters see m Principles of Operation n No moving parts to wear or fail. n Electronics can be remotely mounted up to 30.5 m (0 ft). n No fluid

More information

Tapped exhaust port. Sturdy, simple, reliable design. Easy to add on Feedback. High gain pilot valve. Simple calibration, external zero adjustment

Tapped exhaust port. Sturdy, simple, reliable design. Easy to add on Feedback. High gain pilot valve. Simple calibration, external zero adjustment Electropneumatic Positioner Sturdy, simple, reliable design High gain pilot valve Built in gauge ports Tapped exhaust port Easy to add on Feedback Unit F5 Simple calibration, external zero adjustment Bright

More information

Thermatel Model TA2 Mass Flow Transmitter

Thermatel Model TA2 Mass Flow Transmitter Thermatel Model TA2 Mass Flow Transmitter D E S C R I P T I O N Thermatel Model TA2 Thermal Mass Flow Transmitter provides reliable mass measurement for air and gas flow applications. The powerful, yet

More information

Parametrable / Programmable Pressure Transmitter

Parametrable / Programmable Pressure Transmitter Parametrable / Programmable Pressure Transmitter PTM/RS485 CUSTOMER BENEFITS High flexibility due to scalalbe pressure range Digital (RS485) and analogue (4-20mA) output signal in one sensor Available

More information

JUMO dtrans p30 Pressure Transmitter

JUMO dtrans p30 Pressure Transmitter 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure

More information

Over 20,000 Strain Gage Target flowmeters installed since 1952.

Over 20,000 Strain Gage Target flowmeters installed since 1952. Over 20,000 Strain Gage Target flowmeters installed since 1952. Liquid, gases, superheated and saturated steam from -320 to 500 O F and up to 15,000 psi. No frictional moving parts. Designed to withstand

More information

Turbine Flowmeters for Gas Applications

Turbine Flowmeters for Gas Applications Turbine Flowmeters for Gas Applications Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because

More information

Bourdon tube pressure gauge for diaphragm seals

Bourdon tube pressure gauge for diaphragm seals Bourdon tube pressure gauge for diaphragm seals and switch function, Type series BR42.. Features Bourdon tube pressure gauge for diaphragm seal and switch function Nominal range -1 3 bar to -1 15 bar,

More information

Turbine Flowmeters for Gas Applications (Metric)

Turbine Flowmeters for Gas Applications (Metric) Turbine Flowmeters for Gas pplications (Metric) Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs.

More information

Relative pressure transmitter type 520

Relative pressure transmitter type 520 Relative pressure transmitter type 520 Pressure range -1... 9 bar / 0... 2.5 1000 bar The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the

More information

EPR High Precision 3000 psi Electronic Pressure Controller Accurate to 0.25% of full scale

EPR High Precision 3000 psi Electronic Pressure Controller Accurate to 0.25% of full scale EPR-3000 High Precision 3000 psi Electronic Pressure Controller Accurate to 0.25% of full scale General Specifications PRECISE CONTROL UP TO 3000 PSI The Equilibar EPR-3000 dual valve pressure controller

More information

PanaFlow MV82. Insertion Style Multivariable Flowmeter. GE Measurement & Control. Key Benefits. Applications

PanaFlow MV82. Insertion Style Multivariable Flowmeter. GE Measurement & Control. Key Benefits. Applications GE Measurement & Control PanaFlow MV82 Insertion Style Multivariable Flowmeter Key Benefits Multivariable vortex flowmeter for measuring volumetric flow, temperature, pressure, density, and mass flow using

More information

660 Multipoint Electronic Level Switch

660 Multipoint Electronic Level Switch 660 Multipoint Electronic Level Switch General Instructions The Multipoint Electronic Level Switch is a level sensing device which reads process level by capacitance measurement. Capacitance varies according

More information

AT9000 Advanced Transmitter Differential Pressure Transmitters

AT9000 Advanced Transmitter Differential Pressure Transmitters No. SS2-GTX00D-0500 AT9000 Advanced Transmitter Differential Pressure Transmitters OVERVIEW AT9000 Advanced Transmitter is a microprocessor-based smart transmitter that features high performance and excellent

More information

Orifice Plate Flow Meter

Orifice Plate Flow Meter Orifice Plate Flow Meter FOFT Measuring Principle The principle of measuring the differential pressure is based on the fact that a differential pressure is created across that section of a pipe where its

More information

PT-500 Modbus Series User Manual APG

PT-500 Modbus Series User Manual APG PT-500 Modbus Series User Manual APG R Doc #9003999 Rev A, 02/15 Table of Contents Introduction... iii Warranty and Warranty Restrictions... iv Chapter 1: Specifications and Options... 1 Dimensions...1

More information

Certificate of Compliance

Certificate of Compliance Certificate of Compliance Certificate: 1127056 Master Contract: 154490 Issued to: Fisher Controls International LLC 205 S Center St Marshalltown, IA 50158 USA Attention: Daniel G. Moyer The products listed

More information

SITRANS. Pressure transmitter SITRANS P, Z series for gauge and absolute pressure. Introduction. Safety instructions 2.

SITRANS. Pressure transmitter SITRANS P, Z series for gauge and absolute pressure. Introduction. Safety instructions 2. Introduction 1 Safety instructions 2 SITRANS Pressure transmitter SITRANS P, Z series for gauge and absolute pressure 7MF1564 Description 3 Assembly and connection 4 Technical data 5 Dimensional drawings

More information

The Ins and Outs of I/P Transducers

The Ins and Outs of I/P Transducers The Ins and Outs of I/P Transducers By Mark B. Levine, ControlAir Inc. General description I/P transducers are versatile instruments that use an electrical control signal to proportionally regulate gas

More information

Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters

Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters www.kem-kueppers.com info@kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet TRICOR Series Mass Flow Meters Description The Tricor Mass Flow Meters measure simultaneously mass

More information

Model 1159 Remote Diaphragm Seals Manual

Model 1159 Remote Diaphragm Seals Manual 00809-0100-4504 English June 1999 Rev. AB Model 1159 Remote Diaphragm Seals Manual With Model 1152, Model 1153 Series B, D, and F, and Model 1154 Alphaline Nuclear Pressure Transmitters Product Discontinued

More information

sitrans p Operating Instructions (de/en) Edition 03/2004

sitrans p Operating Instructions (de/en) Edition 03/2004 (de/en) Edition 03/2004 sitrans p Messumformer für Food, Pharma und Biotechnik Transmitters for food, pharmaceuticals and biotechnologgy 7FM8010 Contents Information for the operator...27 Important security

More information

AUTO PUMP STATUS CENTER

AUTO PUMP STATUS CENTER INSTRUCTION MANUAL AUTO PUMP STATUS CENTER PRESSURE ONLY MODEL #: 091-198-12-AP File: IM_091-198-12-AP_revD.indd Rev: D, pg 3 WD Revised By: PSS Date: 2-01-2016 3 YEAR WARRANTY INTRODUCTION The Auto Pump

More information

Installation, operating and maintenance Instructions for Seemag bypass level indicator

Installation, operating and maintenance Instructions for Seemag bypass level indicator Issue: S Date: 05-09-14 Type G35 General information The Seetru bypass magnetic level indicator, abbreviate SEEMAG, serves to show the filling level of fluids in tanks, basins, tubes etc. The Seemag operates

More information

Rosemount 3152K Nuclear Qualified Pressure Transmitter

Rosemount 3152K Nuclear Qualified Pressure Transmitter Product Data Sheet Rosemount 3152K Nuclear Qualified Pressure Transmitter INDUSTRY LEADING PERFORMANCE Qualified per KTA 3505 Mild Environment Qualifications 50 kgy (5 Mrad) TID Gamma Radiation Vibration

More information

CONTROL and INSTRUMENTATION

CONTROL and INSTRUMENTATION CONTROL and INSTRUMENTATION COURSE 500: 5 DAYS: Max 8 Candidates This course covers the key aspects of current instrumentation and process control technology and is designed to enable maintenance personnel

More information

Relative pressure switch type 521

Relative pressure switch type 521 Relative pressure switch type 521 Pressure range 0... 2.5 600 bar The compact type 521 pressure switch is based upon the Huba Control developed thick film technology where the pressure measuring cell is

More information

TYPE APPROVAL CERTIFICATE

TYPE APPROVAL CERTIFICATE TYPE APPROVAL CERTIFICATE Certificate No: TAA0000123 This is to certify: That the Pressure Transmitter with type designation(s) SITRANS P series DS III, P310, P410 Issued to Siemens AG - Process Industries

More information

Additel 780 Series Pressure Controller

Additel 780 Series Pressure Controller Additel 780 Series Pressure Controller Pressure / Process Calibration Equipment Pressure ranges from vacuum to 3,000 psi (200 bar) Removable interchangeable intelligent sensors Precision accuracy of 0.005%

More information

For Multi-Parameter Meters see mvx

For Multi-Parameter Meters see mvx VORTEX IN-LINE FLOW METERS Design Features For Multi-Parameter Meters see mvx Principles of Operation VX No moving parts to wear or fail. Electronics can be remotely mounted up to 30.5 m (0 ft). No fluid

More information

AMS 2710 PCB pressure sensor module with V output

AMS 2710 PCB pressure sensor module with V output FEATURES Universal pressure sensor module with 0.. 10 V voltage output Fully calibrated and temperature compensated sensor module Variants for (bidirectional) differential, gage, absolute and barometric

More information

The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions

The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions Flow Meter with multiple functions for gases and liquids M3 The M-series Flow Meter, with its versatile and user-friendly

More information

E8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm)

E8AA. Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications. Pressure Sensor (Stainless Steel Diaphragm) Pressure Sensor (Stainless Steel Diaphragm) CSM DS_E_3_1 Pressure Sensor of Stainless Steel Construction Is Ideal for a Wide Range of Applications Incorporates double diaphragms consisting of SUS316L stainless

More information

LVU2800 Series. Ultrasonic Level Transmitter

LVU2800 Series. Ultrasonic Level Transmitter LVU2800 Series Ultrasonic Level Transmitter 2 of 23 INTRODUCTION / TABLE OF CONTENTS Step One The LVU2800 Series is a general purpose ultrasonic level transmitter that provides a loop powered 4 20 ma output.

More information

Programmable Submersible Level Transmitters

Programmable Submersible Level Transmitters Programmable Submersible Level Transmitters PTM/N/RS485 CUSTOMER BENEFITS High flexibility due to scalalbe pressure range Digital (RS485) and analogue (4-20mA) output signal in one sensor Available as

More information

Technical Explanation

Technical Explanation Technical Explanation for ESI Pressure Sensors Technical Explanation What is a pressure transmitter? A pressure transmitter (also called pressure transducer or pressure converter) is a component used to

More information

Level transmitter LT 100

Level transmitter LT 100 KROHNE 09/2001 7.02363.21.00 GR/PRINTO Level transmitter LT 100 Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters

More information

MPM280 Piezoresistive OEM Pressure Sensor

MPM280 Piezoresistive OEM Pressure Sensor MPM280 Piezoresistive OEM Pressure Sensor MPM280 Pressure Sensor (V2.0) Features Pressure range 0kPa~20kPa 100MPa; Gauge, absolute and sealed gauge; Constant current / Constant Voltages power supply; Isolated

More information

L3 Pressure and Level transmitter

L3 Pressure and Level transmitter SENSORS FOR AND BIOPHARMA. Product Information L3 L3 Pressure and Level transmitter Range of applications Hydrostatic Level measurement in dynamic temperature environments Pressure measurement in pipes

More information

Electronic gas volume corrector model DGVC-04

Electronic gas volume corrector model DGVC-04 Electronic gas volume corrector model DGVC-04 1. Introduction The following user s manual gives information about the installation, configuration, usage and storage of the electronic gas volume corrector

More information

MANUAL KPS Pressure Control Valve

MANUAL KPS Pressure Control Valve TetraTec Instruments GmbH Gewerbestrasse 8 71144 Steinenbronn Deutschland E-Mail: info@tetratec.de Tel.: 07157/5387-0 Fax: 07157/5387-10 MANUAL Pressure Control Valve *** VERSION 1.0 *** Update: 17.11.2006

More information

DPI 610/615 Series. Druck Portable. Pressure Calibrators. GE Sensing. Features. Setting the Standard for Portable. Pressure Calibrators

DPI 610/615 Series. Druck Portable. Pressure Calibrators. GE Sensing. Features. Setting the Standard for Portable. Pressure Calibrators Features Ranges -14.7 to 10,000 psi Accuracy from 0.025% full scale (FS) Integral combined pressure/vacuum pump Dual readout: input and output 4 to 20 ma loop test: auto step and ramp Intrinsically safe

More information

EXPLOSION-PROOF PRESSURE, VACUUM,

EXPLOSION-PROOF PRESSURE, VACUUM, EXPLOSION-PROOF PRESSURE, VACUUM, differential PRESSURE, TEMPERATURE SWITCHES 120 Series FEATURES Class I, Div. 1 & 2, (Zone 1) Class II, Div. 1 & 2 Class III Worldwide approvals and certifications Choice

More information

EcoPRO-Series 4-20mA SUBMERSIBLE PRESSURE TRANSMITTER INSTRUCTIONS

EcoPRO-Series 4-20mA SUBMERSIBLE PRESSURE TRANSMITTER INSTRUCTIONS EcoPRO-Series 4-20mA SUBMERSIBLE PRESSURE TRANSMITTER INSTRUCTIONS EcoPRO-Series 4-20mA SUBMERSIBLE PRESSURE TRANSMITTER INSTRUCTIONS 9001:2008 ISO CERTIFIED COMPANY Table of Contents Introduction - EcoPRO-Series

More information

Model 601CV. Mass Flow Controller. Product Features:

Model 601CV. Mass Flow Controller. Product Features: Model 601CV Mass Flow Controller Porter s Model 601CV Series II Mass Flow Controller (MFCs) is designed for precise control of virtually all conventional process gases. The MFC consists of a thermal mass

More information

High-speed pressure sensor Model CPT6140

High-speed pressure sensor Model CPT6140 Calibration technology High-speed pressure sensor Model CPT6140 WIKA data sheet CT 25.11 Applications Testing technology Calibration technology Laboratories and maintenance shops Leak and burst applications

More information

ADVANTAGES DESCRIPTION MECHANICAL FITTINGS AND DIMENSIONS

ADVANTAGES DESCRIPTION MECHANICAL FITTINGS AND DIMENSIONS 03304 Float Gauge: Level measurement Application: LNG tanks Level 03304 E 1 ADVANTAGES - High level accuracy - Local mechanical counter read out. - High reliability - Suitable for 12 and 8 still well.

More information

HUMOR 20. High Accuracy Humidity Calibrator. Water T, p1 HUMOR 20 V1.0

HUMOR 20. High Accuracy Humidity Calibrator. Water T, p1 HUMOR 20 V1.0 High Accuracy Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according

More information

Mass Flow Controllers

Mass Flow Controllers Mass Flow Meters & Controllers HFM-D-3A & 305A Mass Flow Meters HFC-D-3A & 307A Mass Flow Controllers FEATURES Range 0-25 slm to 0-2500 slm (N 2 Equivalent) Excellent Accuracy ±(0.5% of Reading + 0.2%

More information

SAPCON. User Manual. Capacitance Continuous Level Indicator. . Introduction. . General Description. . Principle of Operation. .

SAPCON. User Manual. Capacitance Continuous Level Indicator. . Introduction. . General Description. . Principle of Operation. . User Manual Capacitance Continuous Level Indicator Comprehensive User s Manual. Introduction. General Description. Principle of Operation. Specifications. Connection Diagrams. Quick Calibration Chart.

More information

Valve Proving System VDK 200 A S02

Valve Proving System VDK 200 A S02 Valve Proving System VDK 200 A S02 Valve proving system with the following approvals. UL Recognized File # MH17004 CSA Certified File # 1637485 CSA Requirement No. 4-01 (USA) Technical Information Letter

More information

L 100. Bubble-Tube Level System. Installation, Operation and Maintenance Instructions

L 100. Bubble-Tube Level System. Installation, Operation and Maintenance Instructions L 100 Bubble-Tube Level System Installation, Operation and Maintenance Instructions Figure 1 Contents Section Description Page 1.0 Introduction 2 2.0 Specifications 3 3.0 Installation 3 4.0 Warranty 6

More information

SLA5810/20/40 SLAMf10/20 Series

SLA5810/20/40 SLAMf10/20 Series Model SLA5810/20/40 Model SLAMf10/20 Overview Data Sheet SLA5810/20/40 SLAMf10/20 Series Pressure Controller (Thermal Mass Flow) Elastomer Sealed, Digital, Upstream, Downstream, and Remote Transducer Pressure

More information

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20

More information

SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function

SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function Technical Instructions Document No. 155-752 SKP25 U.. Description Only when assembled to Series VG Gas valves SKP25

More information

Hazardous Gas Detection System Bently Nevada* Asset Condition Monitoring

Hazardous Gas Detection System Bently Nevada* Asset Condition Monitoring Hazardous Gas Detection System Bently Nevada* Asset Condition Monitoring Description The Bently Nevada* Hazardous Gas Detection System consists of the 350800 Hazardous Gas Sensor (with or without a housing)

More information

Expert Hydrostatic Level Transmitters

Expert Hydrostatic Level Transmitters Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level

More information

Thermatel Enhanced Model TA2 Thermal Mass Flow Meter

Thermatel Enhanced Model TA2 Thermal Mass Flow Meter Thermatel Enhanced Model TA2 Thermal Mass Flow Meter D E S C R I P T I O N The Thermatel Enhanced Model TA2 Thermal Mass Flow Meter provides reliable mass measurement for air and gas flow applications.

More information

SPECIFICATIONS ATTENTION

SPECIFICATIONS ATTENTION VPS 504 S06 Installation Manual - P/N 80122 - Ed. 01/09 VPS 504 S06 and S05 Valve Proving System Installation Instructions VPS 1 6 Gases Natural gas, air and other inert gases. NOT suitable for butane

More information

Instruction Manual for Intrinsically Safe - Reed Switches

Instruction Manual for Intrinsically Safe - Reed Switches Instruction Manual for Intrinsically Safe - Reed Switches Option Code: -1S2-IS-LED or -2S2-IS-LED -1S2-IS or -2S2-IS ATEX RCM Industries, Inc. Direct Reading Differential Pressure Flowmeters 110 Mason

More information

Mobrey 9700 Transmitter Submersible Hydrostatic Level Transmitters

Mobrey 9700 Transmitter Submersible Hydrostatic Level Transmitters Product Data Sheet Mobrey 9700 Transmitter Mobrey 9700 Transmitter Submersible Hydrostatic Level Transmitters Hydrostatic electronic level transmitters Factory sealed and tested for submersed duty 4 20

More information

Pressure Switch for gas and air

Pressure Switch for gas and air Switch for gas and air GAO-A4 GMH-A4 GML-A4 UL Listed UL 353 File # MH 16628 CSA Certified CSA C22.2 No. LR 53222 Certification file # 201527 FM Approved Class 3510, 3530 File # J.I. 1Y919.AF Commonwealth

More information

Relative and differential pressure transmitter type 692

Relative and differential pressure transmitter type 692 Relative and differential pressure transmitter type 692 Pressure range 0... 0.1 25 bar Type 692 pressure transmitters have a unique, well proven ceramic technolgy. There are variety of pressure and electrical

More information

MODEL ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT

MODEL ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT MODEL 862-000-200 ANALOG ALTIMETER USER'S MANUAL 330KHZ, 1000M DEPTH RATED 0.2 TO 100FT OPERATING RANGE ANALOG OUTPUT DOCUMENT NO. 430-007H September 20, 2005 S/N IMAGENEX TECHNOLOGY CORP. 209-1875 BROADWAY

More information

Omniflo. Turbine Flowmeters. Description. Features. Applications. Omniflo Turbine Flowmeters. Operation

Omniflo. Turbine Flowmeters. Description. Features. Applications. Omniflo Turbine Flowmeters. Operation Omniflo Turbine Flowmeters Description Flow Technology s Omniflo turbine flowmeter is a tangential flow transducer capable of measuring very low flow rates in either liquid or gas with excellent speed

More information

RC 195 Receiver-Controller

RC 195 Receiver-Controller Document No. 129-082 RC 195 Receiver-Controller Product Description The POWERS RC 195 Receiver-Controller is a pneumatic instrument that receives one, two or three pneumatic inputs. It produces a pneumatic

More information

MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400

MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400 MJK Expert 700 / 800 / 900 / 7070 / 7060 MJK Expert 1400 / 3400 Submersible Hydrostatic s Rugged and versatile 2.75 GB 2.75 Expert 090311 We reserve the right to continuously improve our products and make

More information

Model 266MST Differential Model 266RST Absolute. 2600T Series Pressure Transmitters Engineered solutions for all applications

Model 266MST Differential Model 266RST Absolute. 2600T Series Pressure Transmitters Engineered solutions for all applications Data Sheet DS/266MST/RST-EN Model 266MST Differential Model 266RST Absolute 2600T Series Pressure Transmitters Engineered solutions for all applications Base accuracy 0.04 % of calibrated span, (Option

More information

Calibrating pressure transmitters and switches in potentially explosive atmospheres

Calibrating pressure transmitters and switches in potentially explosive atmospheres Calibrating pressure transmitters and switches in potentially explosive atmospheres Application Note Pressure calibration can be a difficult challenge in the best of environments. Doing so in an area that

More information

KMT. Thermal Mass Flowmeter. for compressed air and gases. Measuring range: Nm³/h Nm³/h

KMT. Thermal Mass Flowmeter. for compressed air and gases. Measuring range: Nm³/h Nm³/h Thermal Mass Flowmeter for compressed air and gases measuring monitoring analysing KMT Measuring range: 0.32... 63 Nm³/h - 263.4... 263350 Nm³/h Accuracy: ± 1.5% of reading + 0.5% of full scale ( DN 50)

More information

HUMOR 20. High-precision Humidity Calibrator HUMOR 20. Operation

HUMOR 20. High-precision Humidity Calibrator HUMOR 20. Operation High-precision Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according

More information

CERTIFICATE OF COMPLIANCE

CERTIFICATE OF COMPLIANCE FM Approvals 1151 Boston Providence Turnpike P.O. Box 9102 Norwood, MA 02062 USA T: 781 762 4300 F: 781-762-9375 www.fmapprovals.com CERTIFICATE OF COMPLIANCE HAZARDOUS (CLASSIFIED) LOCATION ELECTRICAL

More information

EASIDEW TRANSMITTER with Current Source Output

EASIDEW TRANSMITTER with Current Source Output EASIDEW TRANSMITTER with Current Source Output INSTALLATION, OPERATION AND MAINTENANCE MANUAL Issue March 2002 2 TABLE OF CONTENTS SECTION PAGE 1. INTRODUCTION 3 1.1 General 3 1.2 Ceramic Sensing Element

More information

Pressure is our Business

Pressure is our Business Pressure is our Business Count on gauges and calibrators that perform Wherever you work Reduce Measurement Error Protect against diminished accuracy from environmental conditions, accidental damage, and

More information

Product Catalogue. P-SERIES Pressure Gauges

Product Catalogue. P-SERIES Pressure Gauges Product Catalogue P-SERIES Pressure Gauges 2 3 CONTENT INTRODUCTION PRESSURE GAUGES...4 P-SERIES (Gauges for Pressure and Vacuum)...6-25 P-SERIES Model P1 (Stainless Steel Bourdon-Tube Pressure Gauge)...6

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure Siemens AG 007 SITRANS P measuring instruments for pressure / Product overview /4 Transmitters for gage and absolute pressure /4 Z series for gage and absolute pressure /9 ZD series for gage and absolute

More information