Technote. Frese PVS - Dynamic Pressure and Flow Regulation Valve. Application. Features. Benefits.
|
|
- Aldous Richard
- 6 years ago
- Views:
Transcription
1 Page 1 of 15 - Dynamic Pressure and Regulation Valve Application system can be installed in domestic and commercial heating and cooling systems. system is a dynamic valve arrangement designed to regulate flow and differential pressure using the Frese S dynamic balancing valve positioned in the flow, and the Frese PV differential pressure control valve positioned in the return. The PVS is supplied with capillary tube, isolation valves, drain valves, P/T plugs and unions as standard. system ensures 1% flow and differential pressure regulation under all conditions, irrespective of any changes within the system, providing simple and trouble free commissioning. The system operates by limiting the flow in the system and eliminating any noise caused by excess differential pressure. Benefits Features and differential pressure can be adjusted independently of each other. Setting the differential pressure can be easily adjusted after installation. Size range: DN15 to DN5 Maximum flow: 1.3m 3 /h Maximum differential pressure 25kPa/4kPa Tamperproof presetting device fitted on the top of the valve. Simple presetting of flow and pressure. Setting range: 5kPa to kpa Differential pressure regulation, flow regulation, isolation, drain and PT plugs as standard No additional commissioning required if the system design is changed. High levels of comfort and energy savings for the end user. UK DEC. 9
2 Page 2 of 15 - Dynamic Pressure and Regulation Valve Design Simplified outline Frese S Adjustable Dynamic Balancing Valve System Frese PV Adjustable Differential Pressure Control Valve Return system measurement of differential pressure and flow across the valve Frese S Design flow: Q is adjusted directly on Frese S (see graphs on the diagram) Differential pressure : ΔP S is adjusted directly on Frese PV (see graphs on the diagram) Return Frese PV P F- The flow in the system is verified by measuring minimum differential pressure (min. Δp) is avaliable across the Frese S valve. Measured from P F+ to P F- (see graphs on the Preset diagram) P F+ Δp of the system is measured from P F- to P +. P + UK DEC. 9 P -
3 Page 3 of 15 - Dynamic Pressure and Regulation Valve Technical data Housing: DP controller: setting: Spring: Diaghragm: O-rings: Pressure class: Max. differential pressure: Temperature range: Capillary tube: DZR, Brass CW62N PPS 4% glass PPO Stainless steel HNBR EPDM PN16 LP = 25 kpa HP = 4 kpa -1 C to + 12 C Ø3, L = 1mm L1 H2 Return H1 H3 H L Type Application Two-pipe system UK DEC. 9 Dimension DN15 DN2 DN25 DN32 DN4 DN5 Version LP HP LP HP LP HP HP HP HP Control range [kpa] Pressure range [kpa] PV,14-,167,2-,333,2-,27,42-,556,167-,694,194-1,167,27-1,39,33-2,222 1,39-4,167 rate [l/s] S,7-,223,11-,36,11-,351,1-,512,17-,462,25-,653,6-1,32,49-2,67,122-2,6 PVS,14-,167,2-,36,2-,27,42-,512,167-,462,194-,653,27-1,32,33-2,67 1,39-2,6 Dimension mm L H H L H H
4 Page 4 of 15 - Dynamic Pressure and Regulation Valve Product programme PVS with 2 isolation valves, 2 drain valves, P/T plugs, capillary tube and union connections. Dimension DN15 DN2 DN25 DN32 DN4 DN5 - LP Frese PV, 5-3 kpa & Frese S, LP - HP Frese PV, 2-6 kpa & Frese S, HP - LP Frese PV, 5-3 kpa & Frese S, LP - HP Frese PV, 2-6 kpa & Frese S, HP - LP Frese PV, 5-3 kpa & Frese S, LP - HP Frese PV, 2-6 kpa & Frese S,HP HP Frese PV, 2- kpa & Frese S, HP HP Frese PV, 2- kpa & Frese S, HP HP Frese PV, 2- kpa & Frese S, HP Accessories Frese no. Dim./DN Insulation jackets PV+S PV+S /2/ /4/5 Spindle extension Example 15/ /4 5 Please note: As the flow is reduced in the circuit in question the pressure increases in reverse ratio to the flow, which is due to the P-band of the adjustment spring. The valve still compensates for this. Frese S Frese PV However, the pressure will nowhere in the circuit be as high as the pump pressure that would have been available if Frese PV had not been installed. In this example the pressure increases to approx. 14 kpa as the graph is offset parallel to the course of flow. Furthermore, you can always read from the graph what the pressure in the circuit will be like at any flow rate below the rated 5 l/h. L/s L/h,167 6,139 5,111 4,3 3 5 kpa 1 kpa rate graph - Frese PV DN15 15 kpa ΔPs 2 kpa Pp = Pump pressure Ps = Differential pressure Pv = Pressure loss across valve 25 kpa Frese PV kpa 3 kpa 2, 1,9 1,2,7,56 2,3 UK DEC. 9,2 1,1, Setting [ Numbers of turns]
5 Page 5 of 15 - Dynamic Pressure and Regulation Valve Example DN15 Low Pressure Design differential pressure 12 kpa Design flow,139 l/s Differential pressure setting Frese PV 1. The design flow is used as the point of reference for the setting. (See the graph) 2. In order to make reading easier the graphs indicating the pressure in the circuit are arranged at intervals of 5 kpa. Still, the graphs can be offset according to the specified pressure of 12 kpa in our circuit. From the intersection of the 12 kpa graph and the horizontal line indicating,139 l/s a line perpendicular to the x-axis is made to read the pre-set value. app. 7 turns on the scale. 3. The minimum pressure drop required will be 1.9 kpa across the valve. (ΔP V2 ) L/s L/h,167 6,139,111,3,56, kpa 1 kpa Frese PV DN kpa 12 kpa 2 15 kpa 2,, kpa 25 kpa 3 kpa 1,9 1,2,7,3,1 3 setting Frese S 1. The design flow is used as the point of reference for the setting. (See the graph) 2. The pre-setting for the valve is found by means of the flow rate graph. Setting = The minimum pressure drop required will be 11 kpa across the valve. (ΔP V1 ) Frese S DN15 Low Pressure (l/s) (l/h) kv (m 3 /h) min. Δp kpa,1,222,3,6, 1,1 1,3 1,6 1, 2,1 2,2 12,,194, ,2 11,6, , ,4,3 3 9,,56 2 9,2 Total pump pressure Calculation of the total pump pressure: Pp = Ps + ( P V1+V2 ) Pp = 12 kpa + (11 kpa + 1,9 kpa) = 24,9 kpa, ,6 UK DEC. 9
6 Page 6 of 15 DN15 LP - Dynamic Pressure and Regulation Valve L/s L/h,167 6 Frese PV DN kpa ΔPs 2,, ,9, kpa 1 kpa 15 kpa 2 kpa 25 kpa 3 kpa 1,2,3 3,7,56 2,3,2 1,1, (l/s) (l/h),222 Frese S DN15 Low Pressure Kvs (m 3 /h) min. Δp kpa,1,3,6, 1,1 1,3 1,6 1, 2,1 2,2 12,, ,2, ,6, , ,4,3 3 9,,56 2 9,2,2 1,6 UK DEC
7 Page 7 of 15 DN15 HP - Dynamic Pressure and Regulation Valve Frese PV DN kpa L/s,333 L/h 12 11,1,27 1 7,7,222 2 kpa 3 kpa 4 kpa 5 kpa 6 kpa 4,9, ,, ,2,56 2,3, Frese S DN15 High Pressure kv (m 3 /h),1,3,6, 1,1 1,3 1,6 1,9 2,2 2,4 Δp kpa UK DEC. 9
8 Page of 15 DN2 LP - Dynamic Pressure and Regulation Valve L/s L/h,27 1 Frese PV DN2 5-3 kpa ΔPs 6,3,25 9 5,1,222 4,,194, kpa 1 kpa 15 kpa 2 kpa 25 kpa 3 kpa 3,1 2,3, ,6, ,,3 3,6,56 2,3,2 1, , 1 (l/s) (l/h), Frese S DN2 Low Pressure Kvs (m 3 /h) min. Δp kpa,2,5,9 1,4 1, 2,2 2,5 2,9 3,2 3,3 15,333,36,27,25,222,194,167,139,111,3,56, , , , ,5 11 1,5 1 9,5 9 UK DEC. 9,
9 Page 9 of 15 DN2 HP - Dynamic Pressure and Regulation Valve Frese PV DN2 2-6 kpa L/s,556 L/h 2 25,,5 1 2,3, ,,39, kpa 3 kpa 4 kpa 5 kpa 6 kpa 12,3 9,,27 1 6,3,222 4,, ,3, ,,56 2, , 17 1 Frese S DN2 High Pressure kv (m 3 /h),2,6 1, 1,5 1,9 2,3 2,7 3,1 3,5 3,6 Δp kpa UK DEC. 9
10 Page 1 of 15 DN25 LP - Dynamic Pressure and Regulation Valve L/s L/h, Frese PV DN kpa ΔPs 6,9, ,4, kpa 1 kpa 15 kpa 2 kpa 25 kpa 3 kpa 2,5,27 1 1,1,139 5, , (l/s) (l/h),472 17,444 16,417 15,39 14, Frese S DN25 Low Pressure Kvs (m 3 /h) min. Δp kpa,2,7 1,3 1,9 2,5 3, 3,4 3,7 4, 4, , ,5 15,333,36,27,25,222,194,167,139,111, , , , ,5 11 1,5 1 UK DEC. 9,56,2 2 9,5 1 9,
11 Page 11 of 15 DN25 HP - Dynamic Pressure and Regulation Valve Frese PV DN kpa L/s 1,111 L/h 4 17,7, ,6, kpa 3 kpa 4 kpa 5 kpa 6 kpa 1,, ,9, ,4, ,5,27 1 1,1,139 5, , Frese S DN25 High Pressure kv (m 3 /h) Δp kpa,3, 1,5 2,2 2, 3,3 3, 4,1 4,3 4,4 UK DEC. 9
12 Page 12 of 15 DN32 HP - Dynamic Pressure and Regulation Valve L/s L/h 1,39 5 Frese PV DN32 2- kpa ΔPs 19,2 1, ,6 1, ,3,972, kpa 3 kpa 4 kpa 5 kpa 6 kpa 7 kpa kpa 9,4 6,9, ,, ,1, ,7,27 1,,139 5, , Frese S DN32 High Pressure (I/S) (I/H) Kvs (m 3 /h) Δp kpa,6 1, 3, 4,1 5,2 6,3 7,3,1,7, UK DEC. 9
13 Page 13 of 15 L/s L/h 2,222 DN4 HP - Dynamic Pressure and Regulation Valve Frese PV DN4 2- kpa ΔPs 23, 1, ,2 1,667 1, kpa 3 kpa 4 kpa 5 kpa 6 kpa 7 kpa kpa 13,4 9,3 1, ,9,33 3 3,3, ,5,27 1, , (I/S) (I/H) Frese S DN4 High Pressure Kvs (m 3 /h) Δp kpa,5 2, 4, 5,9 7,6 9, 1,5 11, 12,9 13,2 UK DEC. 9
14 Page 14 of 15 DN5 HP - Dynamic Pressure and Regulation Valve L/s L/h Frese PV DN5 2- kpa ΔPs 3, ,2 3, ,9 2, kpa 3 kpa 4 kpa 5 kpa 6 kpa 7 kpa kpa 31,2 2,222 2, 1, ,2 1, ,, , , (I/S) (I/H) Frese S DN5 High Pressure Kvs (m 3 /h) Δp kpa 1,1 3,6 6,2,6 1,6 12,4 14, 15,4 16,2 16,7 UK DEC. 9
15 Page 15 of 15 - Dynamic Pressure and Regulation Valve Text for technical specifications The valve should be a dynamic differential pressure and flow control valve with the option of setting the differential pressure and flow on site without suspension of operation. The valve should limit the differential pressure in a circuit. The valve should include optional P/T plugs for the verification of differential pressure in circuit and across the valve. The differential pressure control valve scale should only be adjustable by means of a key. The flow control valve should only be adjustable by means of a lockable handle. The valve should be permanently marked with an indicator for flow direction. Pressure rating PN16. UK DEC. 9 Frese A/S assumes no responsibility for errors, if any, in catalogues, brochures, and other printed matter. Frese A/S reserves the right to modify its products without prior notice, including already ordered products, if this does not alter existing specifications. All registered trademarks in this material are the property of Frese A/S. All rights reserved. Frese A/S Sorøvej DK- 42 Slagelse Tel: Fax: frese@frese.dk
Technote. Frese PV-SIGMA Compact Dynamic Pressure and Flow Regulation. Description. Application. Operation. Features. Benefits.
Page 1 of 15 Dynamic Pressure and Regulation Description The system is a dynamic valve arrangement designed to regulate flow and differential pressure. Application The system can be installed in both domestic
More informationTechnote. Frese ALPHA cartridges. Application. Features. Benefits.
Page 1 of 7 Application is used in heating and cooling systems for the distribution of flow in various sections of the system. The dynamic balancing valve ensures easy and reliable balancing of the system,
More informationBallorex Dynamic Description. Versions. Benefits. Balancing
Ballorex Dynamic Description The Ballorex Dynamic valve is a combined pressure independent flow limiter and control valve which maintains a constant flow independently of pressure changes in heating or
More informationVersions. Benefits. Balancing DN15-32 DN40 DN50 DN15, DN20, DN25, DN32, DN40, DN50. Dimensions
Ballorex Delta Description The Ballorex Delta is a differential pressure control valve used in hydronic heating or cooling systems. By ensuring a constant differential pressure across motorized or static
More informationSTAP. Differential pressure controller DN 15-50
Differential pressure controller 15-50 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE is a high-performing differential pressure controller that keeps the
More informationTBV-CM. Combined control & balancing valves for small terminal units For modulating control
TBV-CM Combined control & balancing valves for small terminal units For modulating control IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling systems, the
More informationSTA. Double regulating valves DN 15-50
STA Double regulating valves DN -0 IMI TA / Balancing valves / STA STA The STA double regulating valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for
More informationDifferential pressure controller (PN 16) AHP - return mounting, adjustable setting
Data sheet Differential pressure controller (PN 16) AHP - return mounting, adjustable setting Description DN 15-40 DN 50 DN 65-100 AHP is a self-acting differential pressure controller primarily for use
More informationDifferential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting
Differential pressure controller (PN 25) AVP - return and flow mounting, adjustable setting Description AVP(-F) is a self-acting differential pressure controller primarily for use in district heating systems.
More informationSTAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves
STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance
More informationDifferential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting
Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in
More informationTA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics
TA-FUSION-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P TA-FUSION-P These innovative
More informationSTA. Double regulating valves DN 15-50
STA Double regulating valves DN 15-50 IMI TA / Balancing valves / STA STA The STA double regulating valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for
More informationTA-COMPACT-P. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV)
Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV) IMI TA / Control valves / The pressure independent balancing and control valve ensures
More informationPVM 15-50, differential pressure valves
PVM 15-5, differential pressure valves High accuracy Low pressure drop Quick to install Dimension: DN 15-5 Temperature: -1 C till +12 C Pressure class: PN 2(STV)/PN 25(PV) February 218 Rev. Description
More informationSTAP. Differential pressure controller DN
STAP Differential pressure controller DN 65-100 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE The flanged STAP is a high-performing differential pressure
More informationDifferential pressure control and flow limiter AVPB/AVPB-F, PN 16
Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.
More informationTRV-2, TRV-2S. Thermostatic radiator valves With presetting
TRV-2, TRV-2S Thermostatic radiator valves With presetting IMI EIMEIER / Thermostatic heads and Radiator valves / TRV-2, TRV-2S TRV-2, TRV-2S Thermostatic radiator valve primary for radiators in heating
More informationPresetting Valve Type RA-N with Flange Connection
Data Sheet Presetting Valve Type RA-N with Flange Connection The setting options range from kv = 0.08-0.67 m3/h. Kvs = 0.88 m3/h Application The valve is deliveres assembled including mounted air ventilation
More informationSTAP. Differential pressure controllers DN , ANSI fl anges
STAP Differential pressure controllers DN 65-100, ANSI fl anges IMI TA / Differential pressure controllers / STAP STAP The fl anged STAP is a high-performing differential pressure controller that keeps
More informationDifferential pressure controller (PN 16) AVPL return mounting, adjustable setting
Data sheet Differential pressure controller (PN 16) AVPL return mounting, adjustable setting Description It can be used on primary side of house substations for smaller systems such as one and two-family
More informationSTAP. Differential pressure controllers DN , ANSI flanges
STAP Differential pressure controllers DN 65-100, ANSI flanges IMI TA / Differential pressure controllers / STAP STAP The flanged STAP is a high-performing differential pressure controller that keeps the
More informationAVP-F. p setting range (bar) Code No. 003H6200
Data sheet Differential pressure controller (PN 16) AVP - return and flow mounting, adjustable setting AVP-F - return mounting, fixed setting Description The controller has a control valve, an actuator
More informationTA-Modulator. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve for modulating control
TA-Modulator Combined control & balancing valves for small terminal units Pressure independent balancing and control valve for modulating control IMI TA / Control valves / TA-Modulator TA-Modulator The
More informationAutomatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN
Data sheet Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN 40-100 Description AB-PM is ideal for staged installation and commissioning AB-PM is a combined
More informationSTAD. Balancing valves DN (MD60, MD61, MD62)
STAD Balancing valves DN 15-50 (MD60, MD61, MD62) IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited
More informationAVPQ/AVPQ-F, PN 16. Application
Data sheet Differential pressure and flow control AVPQ/AVPQ-F, PN 16 Application AVPQ is a self-acting differential pressure and flow control primarily for use in district heating systems. AVPQ closes
More informationBTV. Internally threaded 2-way control valve. Flow characteristics. Function
Internally threaded 2-way control valve The valves are designed for control of hot, cold or glycol-mixed water in heating and ventilation systems. They are pressure balanced (from DN20-50, not DN15) and
More informationSTAD-C. Balancing valves DN 15-50
STAD-C Balancing valves 15-50 IMI TA / Balancing valves / STAD-C STAD-C The STAD-C balancing valve has been specially developed for use in indirect cooling systems but performs just as effectively in refrigerated
More informationProduct Sheet Pre-Fabricated Flushing Bypass Assembly for Terminal Applications Mini-Flush 40
Product Sheet Pre-Fabricated Flushing Bypass Assembly for Terminal Applications Mini-Flush 40 Description Miniflush 40 is a pre-fabricated, flushing bypass arrangement for balance, control, isolation,
More informationTBV-CM. Combined control & balancing valves for small terminal units For modulating control NPT threads
TBV-CM Combined control & balancing valves for small terminal units For modulating control NPT threads IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling
More informationDifferential pressure controller (PN 16) AVPL - return mounting, adjustable setting
Data sheet Differential pressure controller (PN 16) AVPL - return mounting, adjustable setting Description It can be used on primary side of house substations for smaller systems such as one and two-family
More informationAutomatic balancing valves ASV
Automatic balancing valves ASV ASV-PV ASV-PV ASV-PV ASV-BD ASV-M DN 15-40 DN 50 DN 65-100 DN 15-50 DN 15-50 Description / Application ASV balancing valves are used for dynamic hydronic balance in heating
More informationDifferential Pressure Control Valve. Passim
Differential Pressure Control Valve Passim 2 Table of contents Chapter Nexus Valve Passim DN 15-50, DN 65-80 1. Safety instructions 4 1.1 Rules/regulations 4 1.2 Intended use 5 1.3 Initial operation 5
More informationUpgradable balancing valves USV
Upgradable balancing valves USV Application / Description USV-I USV-M USV valves are designed for manual hydronic balancing of heating and cooling systems. USV-I (red knob) is used together with USV-M
More informationSTAD. Balancing valves DN 15-50
STAD Balancing valves DN 15-50 IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for use on the
More informationDifferential pressure controller with flow limitation (PN 16, 25, 40) AFPB / VFQ 2(1) AFPB-F / VFQ 2(1)
Data sheet Differential pressure controller with flow limitation (PN 16, 25, 40) AFPB / VFQ 2( AFPB-F / VFQ 2( return mounting, adjustable setting return mounting, fixed setting Description The controller
More informationTA-H.U.B. Centralised balancing and control ENGINEERING ADVANTAGE
Prefab units TA-H.U.B. Centralised balancing and control Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE This customised balancing solution lets you balance
More informationAutomatic balancing valves
Automatic balancing valves ASV DN 15-50 (4th gen.) ASV-PV ASV-BD ASV-M DN 15-50 DN 15-50 DN 15-50 Description ASV whiteboard animation ASV valves are automatic balancing valves. Together with Danfoss presetting
More informationSeated valve for steam (PN 25) VFS 2 2-way valve, flange
Data sheet Seated valve for steam (PN 25) VFS 2 2-way valve, flange Description VFS 2 valve is a range of 2 port flanged valve for chilled water, PHW, MPHW, HPHW (low, medium or high pressure hot water)
More informationAutomatic balancing valves ASV
Automatic balancing valves ASV ASV-P ASV-PV ASV-PV ASV-PV ASV-I ASV-M 15-40 15-40 50 65-100 15-50 15-50 Description / Application ASV balancing valves are used for dynamic hydronic balance in heating and
More informationRadiator thermostats type RA2000, valve bodies type RA-FN (series D) and RA-G
Data sheet Radiator thermostats type RA2000, valve bodies type RA-FN (series D) and RA-G EN 215 Application RA2000 013G2910 Built-in sensor RA2000 013G2920 tamperproof RA2000 013G5062 remote temperature
More informationBalancing Valves. Applications/ Features: Ordering Information: Accessories:
Applications/ Features: Danfoss MSV balancing valves are designed to provide terminal or circuit flow balance in hydronic heating or cooling systems. Each valve provides a high level of balancing accuracy
More informationSTAG. Balancing valves Balancing valve with grooved ends DN
STAG Balancing valves Balancing valve with grooved ends DN 65-300 IMI TA / Balancing valves / STAG STAG A grooved end, ductile iron balancing valve that delivers accurate hydronic performance in an impressive
More informationTA-FUSION-P. NPT threads / ANSI flanges
TA-FUSION-P NPT threads / ANSI flanges Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P
More informationOverview of types. T5-R B2/R B2 en v Subject to changes 1 / 4. k vs (Sequence 2)
Technical data sheet R3015-..-..-B2 / R3020-..-..-B2 Characterised control valves, 6-way, with internal threads Two sequences (cooling/heating) With a rotary actuator 90 Water-side switching or modulating
More informationOverview of types. Technical data. Safety notes
Technical data sheet R2..-S.. Open-close ball valves, 2-way, with internal thread For open and closed cold and warm water systems For shut-off functions on the water side and 2-point controls in U and
More informationSTAD-C. Balancing valve ENGINEERING ADVANTAGE
STA-C Balancing valve Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING AVANTAGE The STA-C balancing valve has been specially developed for use in indirect cooling systems
More informationSeated valve for steam (PN 25)
Data sheet Seated valve for steam (PN 25) VFS 2 Two way valve, flange Description VFS 2 valve is a range of 2 port flanged valve for chilled water, PHW, MPHW, HPHW (low, medium or high pressure hot water)
More informationChrome plated radiator valves type RA-NCX and lockshield valves type RLV-CX
Chrome plated radiator valves type RA-NCX and lockshield valves type RLV-CX Application RA-NCX angle RA-NCX straight RA-NCX left angle RLV-CX straight RLV-CX angle RA-NCX and RLV-CX is a series of chrome
More informationMZX. Three-Port Seat Valves SPECIFICIATIONS AND GUIDE TO SELECTION
01 These seat valves are of globe construction with a linear moving spindle and a modified parabolic characterised plug operating against the upper seat which controls flow quantity to suit the load. The
More informationTwo-port valves, male threaded, PN25
4 379 Two-port valves, male threaded, PN25 VVG55... Two-port valves, externally threaded, PN25 Bronze Rg5 DN15... 25 mm (½"... 1") k vs 0.25... 6.3 m 3 /h Stroke 5.5 mm Suitable for type SQS35... or SQS65...
More informationPressure Independent Control Series
Document No. 155-522 Pressure Independent Control Series Two-Way Cast Iron Flanged Bodies, ANSI 125 and 250 Description Siemens Pressure Independent Control Valves integrate three functions into a single
More informationV5001P. Kombi-Auto Differential Pressure Control Valve. Product specification sheet
V5001P Kombi-Auto Differential Pressure Control Valve Product specification sheet Content Application...1 Special Features...1 Valve Efficiency...1 Technical Data...2 Construction...2 Materials...2 Method
More informationSeated valves VRB 3, VRG 3
Data sheet Seated valves VRB 3, VRG 3 Description VRB, VRG valves provide a quality, cost effective solution for most water and chilled applications. These valves may be used with glycol concentrations
More informationHERZ-Motorised flow controler
HERZ-Motorised flow controler Control and regulating valve Data sheet 46, Issue 214 Dimensions in mm 4 close dimension 9,35 M DN G H1 H2 H2 + Actuator B1 B2 1 2 M 1 46 11 15 3/4 G 66 59 73 134 49 63 48
More informationV311. Venta. Three-way Plug Valve, Flanged PN 16
1 Three-way Plug Valve, Flanged PN 16 can be used in a wide range of applications, such as heating, cooling, air handling and domestic hot water systems. Soft EPDM seals provide tight shut off. The valve
More informationMultifunctional Thermostatic Circulation Valve MTCV - Lead free brass
Multifunctional Thermostatic Circulation Valve MTCV - Lead free brass Introduction Fig. 1 Basic version - A Fig. * Self-acting version with automatic disinfection function - B * thermometer is an accessory
More informationPressure balanced valves (PN 25)
Data sheet Pressure balanced valves (PN 25) 2-way valve, external thread VB 2 2-way valve, flange Description VB 2 and VB 2 are two-way valves designed to work with Danfoss electric actuators AMV(E) 10,
More informationSTAD Series. Balancing and control valves. Technical Data Sheet. WattsIndustries.com
STAD Series Balancing and control valves Technical Data Sheet WattsIndustries.com Description STAD Series variable-orifice threaded valves are designed for flow control and monitoring in climate control
More informationOverview of types. Technical data
Technical data sheet R2..xx-S.. Characterised control valves, 2-way, with internal thread For open and closed cold and warm water systems For modulating water-side control of U and heating systems ir bubble
More informationAutomatic balancing valves ASV
Automatic balancing valves ASV ASV-P ASV-PV ASV-PV ASV-PV ASV-BD ASV-I ASV-M 15-40 15-40 50 65-100 15-50 15-50 15-50 Description / Application ASV balancing valves are used for dynamic hydronic balance
More information2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
More informationSTV / STVL. Danfoss STV series of balancing valves provide testing and balancing of circuit flow for hydronic heating or cooling systems.
Applications/ Features: Danfoss STV series of balancing valves provide testing and balancing of circuit flow for hydronic heating or cooling systems. STV valves provide a high level of balancing accuracy
More informationPressure reduction controller (PN 16, 25, 40)
Pressure reduction controller (PN 16, 25, 40) AFD / VFG 2( - for water AFD / VFGS 2 - for steam Description The controller has a control valve, an actuator with one control diaphragm and a spring for pressure
More informationRotary valves HRB 3, HRB 4
Data sheet Rotary valves HRB 3, HRB 4 Description HRB rotary valves can be used in combination with electric actuators AMB 162 and AMB 182. Features: Lowest leakage in class Unique position indicator (visible
More informationDynamic Valve Type RA-DV Pressure Independent Radiator Valve
Dynamic Valve Type RA-DV Pressure Independent Radiator Valve Application RA-DV straight version RA-DV is a series of pressure independent radiator valves, designed for use in 2-pipe heating systems together
More informationdifferential pressure regulating valve - threaded
140-142 differential pressure regulating valve - threaded Introduction Differential pressure regulating valves (DPRV) maintain the differential pressure across a circuit or sub-branch at a set differential
More informationHERZ - Compact Flow Controller with
HERZ - Compact Flow Controller with Integrated Control Valve Data sheet for flanged compact PIBCV PN 16, Issue 1016 Dimensions in mm min. 200 mm control valve cone valve seat H flow controller cone actuator
More informationRadiator thermostats type RA2000, valve bodies type RA-FN (series D) and RA-G
Data sheet Radiator thermostats type RA2000, valve bodies type RA-FN (series D) and RA-G Application RA2000 013G2910 Built-in sensor RA2000 013G2920 tamperproof RA2000 013G5062 remote temperature adjuster
More informationType overview. R B2 en-gb subject to changes 1
Technical data sheet R30..-..-..-B2 Characterised control valve, 6-way, Internal thread Two sequences (cooling/heating) with one 90 rotary actuator Switching or modulating control on the water side of
More informationRA-N radiator valves with integrated presetting and self-sealing tailpiece
Data sheet RA-N radiator valves with integrated presetting and self-sealing tailpiece EN 215 Application Straight version Angle version Horizontal angle version All RA-N valve bodies can be used together
More informationSeries 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) Type Type 42-28
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) and balanced Type 2422 Valve Type 42-24 Type 42-28 Application Differential pressure regulators
More informationCALEFFI. Ball zone valves. series /03 GB
all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the
More informationDN 1/2" to 2" Female BSP + 0 C C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2" Female BSP + 0 C + 120 C Max Pressure : 16 Bars Specifications : Stainless steel removable filter Female / Female With draining valve Materials
More informationHERZ - Compact Flow Controller with
HERZ - Compact Flow Controller with Integrated Control Valve Data sheet for flanged compact PIBCV PN 16, Issue 0616 Dimensions in mm min. 200 mm control valve cone valve seat H flow controller cone actuator
More informationRadiator valves VDN2.. VEN2.. VUN2..
2 106 EN 215 Straight valves VDN2.. Angle valves VEN2.. Reverse angle valves VUN2.. ACVATIX TM Radiator valves VDN2.. VEN2.. VUN2.. NF norm, for 2-pipe heating systems Valve bodies made of brass, mat nickel-plated
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationDifferential Pressure Control Valve (DPCV)
Differential Pressure Control Valve (DPCV) PATENTED Technical Data and Installation Instructions Page 1 V2 The modulating valves ART 241 balance and control the differential pressure (DPCV) automatically
More informationProducts no longer available
Technical data sheet R2.. Characterized control valves, 2-way, with internal thread for open and closed cold and warm water systems for modulating control on the water side of air-handling and heating
More informationFloor heating. Floor heating manifolds Distributors
Floor heating Floor heating manifolds Distributors IMI TA / Floor heating control / Floor heating Floor heating These floor heating distributor manifolds are of size G1, and are supplied in pairs, i.e.
More informationTechnical data sheet. Type overview. Technical data. Safety notes. T5-R2.. Open-close en v Subject to changes 1 / 3
Technical data sheet R2.. Open-close ball valves, 2-way, with internal thread for open and closed cold and warm water systems for shut-off functions on the water side and 2-point controls in air-handling
More informationBy-pass valves Series 466 Thermatic - Series USVR
By-pass valves Series 466 Thermatic - Series USVR Main features - Available in the following version : Female/Female series 466 1/2, 3/4, 1 Female/Male series USVR 3/4, 1, 1.1/4 - Conforms to standard:
More informationBALANCING VALVES. Total control inside buildings. Flowmaster TM Flowmaster FC TM Deltamatic TM Deltaflow TM ICV - A MEMBER OF THE AVK GROUP
BALANCING VALVES ICV - A MEMBER OF THE AVK GROUP Flowmaster TM Flowmaster FC TM Deltamatic TM Deltaflow TM Total control inside buildings Approvals HQ in Denmark Introducing the company DS/EN ISO9001-2000
More informationVZL valve - 2/3/4-way
VZ valve - 2/3/4-way Description Stem extension plug VZ 2 VZ 3 VZ 4 VZ valves provide a high quality, cost effective solution for the control of hot and/or chilled water for fan coil units, small reheaters,
More informationSeated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Data sheet Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications.
More informationCim 787 Variable orifice balancing valve
im 787 Variable orifice balancing valve 787 im 787 balancing valves are suitable for both heating (LPHW) and cooling applications. They are available in ZR brass (im 787) or in standard brass (im 787OT).
More informationRp [ ] Sv min. [ ] C215QP-B 15 1/ C215QP-D 15 1/ C220QP-F 20 3/ [ ]
Technical data sheet C2..QP-.. For closed cold and warm water systems For modulating control of airhandling and heating systems on the water side Snap-assembly of the actuator overview DN [ ] Vnom [ l/h]
More informationDIFFERENTIAL PRESSURE REGULATING VALVE
Y- DIFFERENTIAL PRESSURE REGULATING VALVE zon body material pressure diameter max. temperature brass 6 bar -50 according to the pressure equipment directive 4/68/UE does not require E marking FEATURES
More informationSeated valves (PN 6) VL 2 2-way valve, flange VL 3 3-way valve, flange
Data sheet Seated valves (PN 6) VL 2 2-way valve, flange VL 3 3-way valve, flange Description VL 2 VL 3 VL 2 and VL 3 valves provide a quality, cost effective solution for most water and chilled applications.
More informationDIFFERENTIAL PRESSURE REGULATING VALVE zcon
DIFFERENTIAL PRESSURE REGULATING VALVE zon Body material pressure diameter Max. temperature Brass DN 15-50 120 according to the pressure equipment directive 2014/68/UE does not require E marking FEATURES
More informationSTAD BALANCING VALVES
BAANCING BAANCING VAVES BAANCING VAVE The STAD balancing valve elivers accurate hyronic perfomance in an impressive range of applications. Ieally suite for use on the seconary sie in heating an cooling
More information3-way control valves VK 3
Data sheet 3-way control valves VK 3 Description / Application VK 3 valves are a range of 3 port high specification flanged valves for chilled water, LPHW, MPHW, HPHW (low, medium or high pressure hot
More information2-Port Seat Valves with Flange, PN 16
4 45 2-Port Seat Valves with Flange, PN 6 VVF45... dular cast iron EN-GJS-400-5 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SKB...- or SKC...- electrohydraulic actuators Use For use in
More informationInstallation, commissioning and servicing instructions
488.03 www.reece.com.au Pressure reducing s Installation, commissioning and servicing instructions Function Pressure reducing s are installed in residential water systems to reduce and stabilise inlet
More informationSimple Set. Pressure Independent Control Valves 2 Way 1/2-2
The Bray Simple Set is a threaded pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SS Series combines high rangeability control
More informationGUMMIKOMPENSATOR GKF8000 / GKF8130
GUMMIKOMPENSATOR GKF8000 / GKF8 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications
More informationTempering valve for solar and instantaneous applications Installation, commissioning and servicing instructions 2522HP series
www.reece.com.au 28255.01 Tempering valve for solar and instantaneous applications 2522HP series Installation, commissioning and servicing instructions The tempering valve is used to regulate the set temperature
More informationThe valves are used in combination with AMV(E) 130/140, AMV(E) 130H/140H and AMV(E) 13 SU actuators. DN k VS
Description VZ 2 VZ 3 VZ 4 VZ valves provie a high quality, cost effective solution for the control of hot an/or chille water for fan coil units, small reheaters, an recoolers in temperature control systems.
More informationRadiator valves VDN1.. VEN1..
2 105 EN 215 Straight valves VDN1.. Angle valves VEN1.. ACVATIX TM Radiator valves VDN1.. VEN1.. DIN-norm, for 2-pipe heating systems Valve bodies made of brass, mat nickel-plated DN 10, DN 15 and DN 20
More information