SAFETY DATA SHEET. USG Plaster Bonding Agent (Pink) Use in accordance with manufacturer's recommendations.

Transcription

1 SAFETY DATA SHEET 1. Identification Product identifier Other means of identification SDS number Synonyms Recommended use Recommended restrictions Sealer Interior use. Manufacturer / Importer / Supplier / Distributor information Use in accordance with manufacturer's recommendations. Company name United States Gypsum Company Address 550 West Adams Street Chicago, Illinois Telephone Website Emergency phone number Hazard(s) identification Physical hazards Health hazards OSHA defined hazards Label elements Sensitization, skin Reproductive toxicity (oral) Specific target organ toxicity, repeated exposure (oral) Category 1 Category 1B Category 2 (Kidney) Signal word Hazard statement Precautionary statement Prevention Response Storage Disposal Hazard(s) not otherwise classified (HNOC) Environmental hazards Danger May cause an allergic skin reaction. May damage fertility or the unborn child. May cause damage to organs (Kidney) through prolonged or repeated exposure. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear protective gloves/protective clothing/eye protection/face protection. Do not breathe mist/vapors/spray. If exposed or concerned: Get medical advice/attention. If on skin: Wash with plenty of water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. Store locked up. Dispose of in accordance with local, state, and federal regulations. Hazardous to the aquatic environment, acute hazard Hazardous to the aquatic environment, long-term hazard Category 2 Category 2 Supplemental information Hazard symbol Hazard statement Precautionary statement Prevention Toxic to aquatic life with long lasting effects. Avoid release to the environment Version #: 01 Revision date: - Issue date: 31-December / 7

2 Response Collect spillage. 3. Composition/information on ingredients Mixtures Chemical name Benzyl butyl phthalate Ethylene glycol 5-Chloro-2-methyl-2H -isot hiazo l-3-o ne CAS number % < < < Composition comments 4. First-aid measures Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Indication of immediate medical attention and special treatment needed General information 5. Fire-fighting measures Suitable extinguishing media Unsuitable extinguishing media Specific hazards arising from the chemical Special protective equipment and precautions for firefighters Fire-fighting equipment/instructions Specific methods All concentrations are in percent by weight unless ingredient is a gas. Gas concentrations are in percent by volume. Exposure to mists may cause temporary irritation to eyes, skin, nose, throat, and upper respiratory tract. Move injured person into fresh air and keep person calm under observation. Get medical attention if symptoms persist. Rinse area with plenty of water. Get medical attention if irritation develops and persists. Do not rub eyes. Flush thoroughly with water. If burning, redness, itching, pain, or other symptoms develop or persist get medical attention. Rinse mouth. Get medical attention if any discomfort occurs. Under normal conditions of intended use, this product is not expected to be a health risk. Overexposure is highly unlikely at concentrations present in this product. Provide general supportive measures and treat symptomatically. Ensure that medical personnel are aware of the material(s) involved. Use fire-extinguishing media appropriate for surrounding materials. Not a fire hazard. Selection of respiratory protection for firefighting: follow the general fire precautions indicated in the workplace. Self-contained breathing apparatus and full protective clothing must be worn in case of fire. Use standard firefighting procedures and consider the hazards of other involved materials. Cool material exposed to heat with water spray and remove it if no risk is involved. 6. Accidental release measures Personal precautions, protective equipment and emergency procedures Methods and materials for containment and cleaning up Environmental precautions See Section 8 of the SDS for Personal Protective Equipment. Prevent entry into confined areas or water systems. Dilute with water and mop or wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Dispose of waste according to local regulations. Avoid discharge to drains, sewers, and other water systems. 7. Handling and storage Precautions for safe handling Conditions for safe storage, including any incompatibilities Minimize exposure to mists. In case of insufficient ventilation, wear suitable respiratory equipment. Observe good industrial hygiene practices. Use proper lifting techniques. Store in a cool, dry place. Store in a closed container away from incompatible materials, food, or drinking water. Protect from moisture. Keep away from heat. Do not use if material has spoiled, i.e., there is a moldy appearance or an unpleasant odor. Keep containers closed when not in use Version #: 01 Revision date: - Issue date: 31-December / 7

3 8. Exposure controls/personal protection Occupational exposure limits US. ACGIH Threshold Limit Values Components Ethylene glycol (CAS ) Biological limit values Exposure guidelines Appropriate engineering controls Type Value Form Ceiling 100 mg/m3 Aerosol. No biological exposure limits noted for the ingredient(s). No exposure standards allocated. Provide sufficient ventilation for operations causing mist formation. Observe occupational exposure limits and minimize the risk of exposure. Individual protection measures, such as personal protective equipment Eye/face protection Wear approved safety goggles. Skin protection Hand protection Other Respiratory protection Thermal hazards General hygiene considerations It is a good industrial hygiene practice to minimize skin contact. For prolonged or repeated skin contact use suitable protective gloves. Normal work clothing (long sleeved shirts and long pants) is recommended. If engineering controls do not maintain airborne concentrations below recommended exposure limits (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn. Use a NIOSH/MSHA approved air purifying respirator as needed to control exposure. Consult with respirator manufacturer to determine respirator selection, use, and limitations. Use positive pressure, air-supplied respirator for uncontrolled releases or when air purifying respirator limitations may be exceeded. Follow respirator protection program requirements (OSHA and ANSI Z88.2) for all respirator use. None. 9. Physical and chemical properties Appearance Odor Physical state Form Color Odor threshold Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Observe any medical surveillance requirements. Liquid. Acrylic emulsion. Gray to off-white. Slight acrylic. ph Melting point/freezing point Initial boiling point and boiling range Flash point Evaporation rate Flammability (solid, gas) 32 F (0 C) 212 F (100 C) Upper/lower flammability or explosive limits Flammability limit - lower (%) Flammability limit - upper (%) Explosive limit - lower (%) Explosive limit - upper (%) Vapor pressure Vapor density Relative density Solubility(ies) Partition coefficient (n-octanol/water) Same as water (H2O=1) Soluble in water Version #: 01 Revision date: - Issue date: 31-December / 7

4 Auto-ignition temperature Decomposition temperature Viscosity Other information Bulk density lb/gal VOC (Weight %) 41.5 g/l (EPA Method 24) 10. Stability and reactivity Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid Incompatible materials Hazardous decomposition products The product is stable and non reactive under normal conditions of storage and transport. Stable at normal conditions. Hazardous polymerization does not occur. Contact with incompatible materials. Strong oxidizing agents. None known. 11. Toxicological information Information on likely routes of exposure Ingestion May cause discomfort if swallowed. Inhalation Skin contact Eye contact Symptoms related to the physical, chemical and toxicological characteristics Information on toxicological effects Acute toxicity Components Acute Dermal Oral Acute Dermal Oral Skin corrosion/irritation Serious eye damage/eye irritation Respiratory sensitization Skin sensitization Germ cell mutagenicity Carcinogenicity Spray mist may irritate the respiratory system. May cause an allergic skin reaction after a single exposure. Prolonged or repeated skin contact may cause irritation and/or sensitization. Direct contact with eyes may cause temporary irritation. Irritation of eyes and mucous membranes. Skin irritation. Low hazard for usual industrial or commercial handling by trained personnel. Species Rat Rat Rabbit Rat Prolonged or repeated skin contact may cause irritation. Direct contact with eyes may cause temporary irritation. Not classified but possible due to skin sensitization effect. Test Results 6700 mg/kg 2330 mg/kg 9530 mg/kg 6140 mg/kg May cause an allergic skin reaction after a single exposure or with repeated or prolonged skin contact. Not mutagenic in bacterial or mammalian systems. This product is not classified as a carcinogen. IARC Monographs. Overall Evaluation of Carcinogenicity Reproductive toxicity Specific target organ toxicity - single exposure May damage fertility or the unborn child. No data available, but none expected. 3 Not classifiable as to carcinogenicity to humans Version #: 01 Revision date: - Issue date: 31-December / 7

5 Specific target organ toxicity - repeated exposure Aspiration hazard Chronic effects May cause damage to organs (Kidney) through prolonged or repeated exposure. Prolonged exposure may cause chronic effects. 12. Ecological information Ecotoxicity Components Aquatic Crustacea Fish Aquatic Fish Persistence and degradability Bioaccumulative potential The product contains a substance which is very toxic to aquatic organisms and which may cause long-term adverse effects in the aquatic environment. EC50 LC50 LC50 No data available. Species Water flea (Daphnia magna) Sheepshead minnow (Cyprinodon variegatus) Fathead minnow (Pimephales promelas) No data available for this product. Partition coefficient n-octanol / water (log Kow) Mobility in soil Other adverse effects 13. Disposal considerations Disposal instructions Local disposal regulations Hazardous waste code Waste from residues / unused products Contaminated packaging Not available. None expected. Test Results > 0.96 mg/l, 48 hours > 0.68 mg/l, 96 hours 8050 mg/l, 96 hours Dispose waste and residues in accordance with applicable federal, state, and local regulations. Avoid discharge into water courses or onto the ground. Dispose of in accordance with local regulations. The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Dispose of in accordance with local regulations. Since emptied containers retain product residue, follow label warnings even after container is emptied. 14. Transport information DOT UN number UN proper shipping name Transport hazard class(es) Subsidiary class(es) Packing group Special precautions for user Special provisions Packaging exceptions Packaging non bulk Packaging bulk IATA UN number UN proper shipping name Transport hazard class(es) Subsidiary class(es) Packaging group Environmental hazards Labels required ERG Code Special precautions for user IMDG UN number UN proper shipping name UN3082 Environmentally hazardous substances, liquid, n.o.s. (Benzyl butyl phthalate RQ = 2004 lbs) 9 - III Read safety instructions, SDS and emergency procedures before handling. 8, 146, 335, IB3, T4, TP1, TP UN3082 Environmentally hazardous substance, liquid, n.o.s. (Benzyl butyl phthalate) 9 - III Yes 9 9L Read safety instructions, SDS and emergency procedures before handling. UN3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Benzyl butyl phthalate) Version #: 01 Revision date: - Issue date: 31-December / 7

6 Transport hazard class(es) 9 Subsidiary class(es) - Packaging group III Environmental hazards Marine pollutant Yes Labels required 9 EmS F-A, S-F Special precautions for user Read safety instructions, SDS and emergency procedures before handling. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information This substance/mixture is not intended to be transported in bulk. US federal regulations This product is hazardous according to OSHA 29 CFR TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) 5-Chloro-2-methyl-2H-isothiazo l-3-o ne (CAS ) 1.0 % One-Time Export Notification only. US. OSHA Specifically Regulated Substances (29 CFR ) Not listed. CERCLA Hazardous Substance List (40 CFR 302.4) Superfund Amendments and Reauthorization Act of 1986 (SARA) Hazard categories Immediate Hazard - Yes Delayed Hazard - Yes Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No SARA 302 Extremely hazardous substance SARA 311/312 Hazardous chemical No Yes LISTED LISTED SARA 313 (TRI reporting) Chemical name CAS number % by wt. Ethylene glycol < 3 Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR ) Not regulated. Safe Drinking Water Act (SDWA) Food and Drug Administration (FDA) US state regulations Not regulated. Not regulated. US. Massachusetts RTK - Substance List US. New Jersey Worker and Community Right-to-Know Act US. Pennsylvania RTK - Hazardous Substances US. Rhode Island RTK 500 lbs 500 lbs US. California Proposition 65 WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. US - California Proposition 65 - Carcinogens & Reproductive Toxicity (CRT): Listed substance Version #: 01 Revision date: - Issue date: 31-December / 7

7 International Inventories Country(s) or region Inventory name On inventory (yes/no)* United States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory Yes *A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s). A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision Issue date Revision date - Version # 01 Further information 31-December-2013 Vinyl acetic monomer, formaldehyde and acetaldehyde: Trace amounts of vinyl acetate monomer and formaldehyde may be found in this product. They are present as trace residuals in many common raw materials that are used to formulate joint compounds, and any emissions from them are expected to be well below ACGIH and OSHA occupational exposure limits. NFPA Ratings NFPA Ratings: Health: 2 Flammability: 0 Physical hazard: 0 NFPA Hazard Scale: 0 = Minimal 1 = Slight 2 = Moderate 3 = Serious 4 = Severe List of abbreviations Disclaimer NFPA: National Fire Protection Association. This information is provided without warranty. The information is believed to be correct. This information should be used to make an independent determination of the methods to safeguard workers and the environment Version #: 01 Revision date: - Issue date: 31-December / 7