* Different spooltypes up to 330 l/min. in combination with simultaneously control.

Size: px
Start display at page:

Download "* Different spooltypes up to 330 l/min. in combination with simultaneously control."

Transcription

1 V-22 Fetures. * Modulr ssemly system, suitle for 'uild rogrm'. * Mx. operting pressure 420 r. * Different spooltypes up to 330 l/min. in comintion with simultneously control. * Compct sndwich design, suitle for moile pplictions. * Severl inlet plte types ville for different types of pumps. * Operting control in ny comintion (electricl, mnul nd hydrulic). * djustle for setting the mximum flow. * Severl user relief options s primiry-, shock-, suction- nd remote control functions. * One full flt surfce for mounting in ny position. * Stndrd sewter resistnt ul.-v22-e-12/11

2 ECHNIC D Mx. flow : Mx. pressure: port // port ressure setting rnge port 1 or 2 port Comiplte port 1 or 2 (22) Comiplte port (22) port / port / without compenstor Nominl pressure drop over 2-wy compenstor (,) Internl pilot pressure supply ilot pressure for electricl nd hydrulic control Spool stroke Spool overlp (ded nd) Fluid Fluid temperture rnge Viscosity rnge Contmintion level mx Mounting position Connections ort ort ort / ort S ort ort Y,Y Electricl connections Electricl Nominl voltge Nominl current Coil resistnce Recommended dither frequency ype of protection Duty cycle Hysteresis Flow Different flowtypes: (with compenstor) 300 / 320 l/min * 660 l/min 320 l/min 660 l/min 330 l/min 380 l/min 420 r 35 r r Mnul operting r Electricl operting 7 r 28 r 6-20 r 7 mm 1,45 mm (21% of the spool stroke) Minerl oil ccording to DIN 51524/ C cst, optiml 30cSt ccording to NS 1638 Clss 8 or ISO 4406: 18/16/13 Optionl S SE OR G1 1/4" 20 G1 1/2" 24 G1 1/4" 20 G1/4" 6 G1/4" 6 G1/4" 6 M Junior ower imer 12 VDC or 24 VDC 12 VDC = 1300 m 24 VDC = 650 m 12 VDC = 5.3 5% 24 VDC = % 100 Hz I % 3% * umpflow, see note pge Spool Spool 200 Flow q : l/min v Spool 0 0 Control current m 24 VDC 1400 m 12 VDC Stroke mm 0 ilot pressure r ever ngle

3 ECHNIC D echnicl informtion. he unique modulrity of the V enles system solutions for mnufcturers of moile mchines, s wide rnge of functions cn e integrted/chnged y the customer in n esy, flexile nd cost-effective wy. Inlet lte. Inlet pltes re ville for fixed nd vrile displcement pumps, nd constnt pressure networks. Functions s: - nti-sturtion; - pump unloding; - pressure relief; - S signl mplifier nd comintions thereof; cn e integrted into the inlet plte. Control Vlve. he control vlve consists of spool section nd connection lock. Spool Section. he min dvntge of the V-series is the stndrdiztion of the spool section. Different types of spools nd control methods re ville. Up to 10 control vlves, with or without 2-wy compenstor cn e stcked. For perfect system stility the 2-wy compenstor cn e equipped with dmping function. Check vlve function is lso ville within this compenstor. Stroke limittion per port nd Δp-setting per section is stndrd. Connection lock. very wide rnge of optionl functions cn e delivered using severl, esy to mount, low cost, connection locks. esides sic connection lock, optimized customiztion cn e chieved y the following functions: - remote controlled pressure setting/unloding per port; - djustle secondry pressure setting per port; - suction vlves nd shock/suction vlves per port; - djustle primry port relief per port with excellent relieving chrcteristic. ny other specil functions cn e esily integrted into specil connection locks on request. End lte. lso the end pltes for different control methods cn e equipped with optionl functions s: - dditionl -port; - Z-port to enle S-cscde with nother vlve; - feeding point for hydrulic joysticks. Sfety. o comply with ntionl nd interntionl sfety regultions, specil sfety functions cn e integrted s descried ove. Serviceility. he modulr concept ( uild-progrm) improved the servicing of the V. ll orifices nd shuttle vlves re directly ttinle from the outside of the vlves. Symols nd erminology. Grphic symols in ccordnce with ISO Identifiction of vlve ports in ccordnce with ISO For the purposes of this document, the definitions nd terminology given in ISO 5598 nd the following definitions pply: - S : lod sensing - rimry relief : relief function in the flow line, e.g. the 3-wy compenstor in the inlet plte nd the shock/suction vlve in the connection lock. - Secondry relief : relief function in the signl line, e.g. mx. lod pressure relief in the inlet plte. Ordering code Dimension pplictions E nd plte Control vlve Inlet plt e echnicl dt 3

4 ECHNIC D Modulrity Inlet plte D1,2,3,4 : ump unloding function E1,2 : Electricl proportionl pressure relief D1,2,3,4 : ump unloding function E1,2 : Electricl proportionl pressure relief : nti-sturtion : nti-sturtion nd S-mplifier 22N 22S : S-mplifier : nti sturtion 22R 22U Connection lock (Some possiilities) (2x) F : ressure setting F : ressure setting : djustle port relief vlve Y : Remote control connection Y : Remote control connection Y : Remote control connection Y : Remote control connection Z : Shock/suction vlve Z N : Suction vlve N Spool section E : Electricl proportionl E : Electricl proportionl OJ : Hydrulic proportionl OJ : Hydrulic proportionl E : Electricl proportionl H : Mnul proportionl H : Mnul proportionl OJ : Hydrulic proportionl F : With compenstor F1 : With compenstor incl. check vlve function F2 : With dmped compenstor F3 : With dmped compenstor incl. check vlve function N : No compenstor N1 : With check vlve function Min spool type,,c,d,f,g,k,o End plte 22H 22J : With dditionl -port : With dditionl -port Z: With Z-port 4

5 S ECHNIC D Exmple: 1C os C 1D C 2D 2E 2F 2G 2H 2I 2J 2K C D 1 3 2C 2D 2 Description: Inlet plte, severl types ville for different types of pumps djustle lod pressure relief, stndrd on ll types of inlet plte ump relief function S mplifier, for strong signl nd perfect stility of the S-pump Electricl proportionl pressure relief Spool section, sic section for different min spool types nd compenstor vrints 2-wy compenstor for lod-independent control nd simultneously opertion Flow djustment y regulting the pressure drop cross the min spool Control method: Electricl proportionl dditionl mnul control Min spool type djustle stroke limittion for djusting the mx. flow per port s 2, with check vlve to -line Control method: Mnul proportionl No 2-wy compenstor per section Control method: Hydrulic roportionl dditionl mnul control Connection lock, seprte lock for ll different types of options Remote control connection on port nd (optionl) djustle pressure setting on port nd (optionl) Shock/Suction vlves port nd (optionl) End plte ressure reducing vlve, for electricl control dditionl pump connection (optionl) 2E 2 2 2F 3 3 Y 2H 2G 3 Y 3 2J 2K 2 I 3C Description Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 5

6 INE E INE E For every pumptype n inlet plte is ville: Fixed displcement pump Fig.1 he V inlet plte version 22U, fig. 1, is designed for fixed displcement pumps. he min relief in this section is functioning s 3-wy compenstor. If none of the control sections re in opertion, the inlet plte version 22U cretes out 14 r in the pumpline. ctuting one of the control sections, the specific lod pressure is dded s signl to the spring chmer. ctuting more control sections t the sme time, the highest lod pressure will e dded. he lod signl pressure is lso controlled y the mx. lod pressure relief. his relief cn e djusted ( r). o feed lso nother circuit, n inlet plte 22R is ville. (see ppliction exmples). M U420 Vrile displcement pump (S-pump) Fig.2 Fig.3 he V inlet plte versions 22N nd 22S re designed for this pump type. he version 22N, fig. 2, hs the function s inlet lock for, nd S (lod sense line). he lod sense signl from the vlvelock cn e djusted, up to 420 r, with the relief vlve. 1 1 Version 22S, fig. 3, hs n overpressure sfety function. he relief vlve cn e djusted to mx. pumpline pressure nd the relief spool reduces the overpressure y relieving the pumpflow to tnk. S 1 S 1 ressure compensted pumps / Constnt pressure networks he V inlet plte version 22N, fig. 2, is lso designed for pressure compensted pumps nd constnt pressure networks. It hs the function s inletlock for,. he S connection G1/4" hs to e locked. he lod signl pressure is controlled y the mx. lod pressure relief. he mx. lod pressure of the vlve lock cn e djusted (up to 420 r). 22N420 22S420 Fig.1 Fig.2 Fig.3 22U420 22N420 22S420 6

7 INE E dditionl functions for ll types of pumps: nti-sturtion function, code, fig. 4 he nti-sturtion function is developed for electricl nd hydrulic controlled vlves. If the vlve lock hs insufficient pumpflow, the user flow for every control section will e reduced with this function so tht every control section keeps working simultneously. Electricl proportionl pressure relief, code E, fig. 5 For remote control of the mximum pressure of the vlve lock, the electricl proportionl pressure relief is ville in 12 VDC nd 24 VDC. ump unloding function, code D, fig. 6 For emergency stop function the lod pressure signl from the control sections cn e unloded directly to tnk. he electricl control is ville in 12 VDC nd 24 VDC with 2/2-wy crtridge in norml-open or norml-closed configurtion. he exmple shows norml-open configurtion. lese note tht the recircultion pressure or stnd-y pressure is still on the -line. dditionl function for S pumps: S mplifier, code, fig. 7 his option enles incresing the S pressure signl if some S-pumps hve continuous lek of the lod-pressure signl to tnk. his option cn lso e used for fine-tuning of the stility of the pump nd the proportionl control. With the djustment screw the stnd-y pressure of the S-pump is djustle within 4 r. Fig.4 Fig.5 S 1 1 Fig.4 Fig.5 22S420D/E S S 1 Fig.7 M 1 1 Fig.7 22S420 1 Fig.6 22N420 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 7

8 INE E COMI INE E If different flows re needed, for exmple 250 nd 75 l/min or less, comintion plte is ville to connect the series V-16 to the series V-22. his is the most chepest nd flexile wy for compct comintion of proportionl directionl control vlves. he comiplte is ville for modelnumer 22N, 22S, 22U nd 22R. Fixed displcement pump he V comi inlet plte version 22U/C, fig. 1, is designed for fixed displcement pumps. he min relief in this section is functioning s 3-wy compenstor. If none of the control sections re in opertion, the inlet plte version 22U/C cretes out 14 r in the pumpline. ctuting one of the control sections, the specific lod pressure is dded s signl to the spring chmer. ctuting more control sections t the sme time, the highest lod pressure will e dded. he lod signl pressure is lso controlled y the mx. lod pressure relief. his relief cn e djusted ( r). o feed lso nother circuit, n inlet plte 22R is ville. 1 Fig.1 22U420/C Vrile displcement pump (S-pump) Fig.2 Fig.3 he V comi inlet plte versions 22N/C nd 22S/C re designed for this pump type. he version 22N/C, fig. 2, hs the function s inlet lock for, nd S (lod sense line). he lod sense signl from the vlvelock cn e djusted, up to 420 r, with the relief vlve. Version 22S/C, fig. 3, hs n overpressure sfety function. he relief vlve cn e djusted to mx. pumpline pressure nd the relief spool reduces the overpressure y relieving the pumpflow to tnk. 1 ressure compensted pumps / Constnt pressure networks he V comi inlet plte version 22N/C, fig. 2, is lso designed for pressure compensted pumps nd constnt pressure networks. It hs the function s inletlock for,. he S connection G1/4" (SE 6) hs to e locked. he lod signl pressure is controlled y the mx. lod pressure relief. he mx. lod pressure of the vlve lock cn e djusted (up to 420 r). 22N420/C 22S420/C Fig.1 Fig.2 Fig.3 22U420/C 22N420/C 22S420/C 8

9 INE E dditionl functions for ll types of pumps: nti-sturtion function, code, fig. 4 he nti-sturtion function is developed for electricl nd hydrulic controlled vlves. If the vlve lock hs insufficient pumpflow, the user flow for every control section will e reduced with this function so tht every control section keeps working simultneously. Electricl proportionl pressure relief, code E, fig. 5 For remote control of the mximum pressure of the vlve lock, the electricl proportionl pressure relief is ville in 12 VDC nd 24 VDC. ump unloding function, code D, fig. 6 For emergency stop function the lod pressure signl from the control sections cn e unloded directly to tnk. he electricl control is ville in 12 VDC nd 24 VDC with 2/2-wy crtridge in norml-open or norml-closed configurtion. he exmple shows norml-open configurtion. lese note tht the recircultion pressure or stnd-y pressure is still on the -line. dditionl function for S pumps: S mplifier, code, fig. 7 his option enles incresing the S pressure signl if some S-pumps hve continuous lek of the lod-pressure signl to tnk. his option cn lso e used for fine-tuning of the stility of the pump nd the proportionl control. With the djustment screw the stnd-y pressure of the S-pump is djustle within 4 r. Fig.4 Fig Fig.5 1 S 22S420D/E/C Fig.4 S 22S420/C 1 S Fig.7 Fig.7 1 M 22N420/C Fig.6 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 9

10 CONRO VVE CONRO VVE. On the sis of the uild-progrm principles the V-22 control vlve consists of I stndrdized spool section nd II sic or customized connection locks nd spring- nd endcps. Mx. 10 control sections. I Spool section: 1 Compenstor types; 2 Control method : electricl, hydrulic nd mnul control; 3 Spool types; 4 Flow per port. 4 3 Fig Compenstor types : he vrious compenstors enle lod independent flow control nd possiility of simultneous opertion. he mx. flow cn e pre-djusted y djusting the compenstor spring. t prt 1 from fig. 8 the following types cn e mounted: Code: F: 2-wy compenstor F1: 2-wy compenstor with lod-hold check vlve F2: 2-wy compenstor with dmping function. F3: 2-wy compenstor with lod-hold check vlve nd dmping function. N: Without compenstor. *Note: Mx. flow depends on stnd-y pressure setting in cse of using S-pump N1: od-hold check vlve. *Note: Mx. flow depends on stnd-y pressure setting in cse of using S-pump 10 9

11 CONRO VVE 2. Control method : 3. Spool types. he spool is ville for different types of users, like single nd doule cting cylinders nd hydrulic motors. C D E = electricl control Code: Symol: Remrk In neutrl position ll ports locked H = mnul control OJ: hydrulicl control: For hydrulic remote control, the endcps hve G1/4" connections. In neutrl position port throttled flow to (pprox.20% of nominl flow) In neutrl position port + throttled flow to (pprox.20% of nominl flow) In neutrl position port throttled flow to (pprox.20% of nominl flow) Code: F G K O Symol: OJ = hydrulic control he electricl- nd hydrulic control cn e configured in comintion with n dditionl mnul control. ll the control methods re stndrd equipped with stroke limiters for seprte fine-tuning the flow of nd/or port. he crtridge cvity in the end-cps is suitle for ll three control methods. E: electricl control: he reducing crtridge is integrted within the proportionl solenoid 24 VDC or 12 VDC. ll the control sections hve pilot supply pressure nd return line, which must e fed through the end plte type 22E. he 22E end plte is equipped with seprte ""-connection to drin the pilot return line to tnk, which cretes perfect system stility. H: mnul control: If the hndle is not ctuted, the spring ssemly keeps the spool in neutrl position (code HF). he mnul control cn e configured with detent or friction rke. Detent (code HR): the spool cn e set in ny position, the center position nd oth end positions re perceptile. Friction rke (code H): the spool cn e set in ny position, the center position is perceptile. Remrk In neutrl position ll ports locked In neutrl position port + throttled flow to (pprox.20% of nominl flow) In neutrl position ll ports locked, port lended * In neutrl position ll ports locked, port lended * * ort is lended with stop in the connection lock 4. Flow per port. Ech user port cn e set t different flow. he flow with compenstor is up to 330 l/min. y djusting the compenstor spring (Δp djustment) the flow of nd port cn e pre-djusted. y using the stroke limiters the flow of nd/or port cn e djusted seprtely. Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 10 11

12 CONRO SECION CONRO VVE II Connection lock. he min flexiility of V series is relized y vrious connection locks with very wide rnge of optionl functions. he connection lock is the only prt to e customized in order to meet specil requirements. he ville connection locks re: 1 - sic version only with nd ports 2 - version with secondry sfety functions 3 - version with primry nd secondry sfety functions 4 - customized versions he code of the connection lock hs to strt with the type of the thred of the connection port (1 1/4" S or SE 20). he other threds re on request. 1. sic version: he sic version is connection lock with only nd ports. code: : he connection nd port is 1 1/4" S. S: he connection nd port is SE Version with secondiry sfety functions: xxxxx- xxxxx-s he version with secondry sfety functions is connection lock with possiility of two secondry sfety functions. Secondry sfety functions re ctive t the lod pressure signl lines, so overpressure (reched mximum lod pressure) cuses smll mount of oil from the lod sense signl vented to tnk t mximum pressure. his in contrst with the primry relief vlves, wherey the full userflow hs to e vented to tnk t mximum pressure. Secondry reliefs re only in function if the control vlve is ctuted. Code: F: djustle pressure setting on port nd : Ech user port cn e set with seprte mximum lod pressure relief. (S-relief) Fctory pressure setting (first -port then -port) hs to e mentioned in the order code. djustle pressure setting only on one port, stte "-" for the other port. Exmple: -port = 380 r nd -port = 320 r: "F= 380/320 r" or only -port = 380 r: "F= 380/- r" Y xxxxx-fy xxxxx-fy Y Y: Remote control connection on port nd : he lod pressure signl of ech userport cn e connected to sytem sfety relief devices, through Y nd Y(1/4"S or SE 6). Exmple: cylinder stroke limiting or overlod control function in comintion with 2/2-wy vlve to tnk. Y F F Y

13 CONRO VVE 3. Version with primry nd secondry sfety functions: he version with primry nd secondry sfety functions is connection lock with possiility of three primry sfety functions nd two secondry sfety functions. rimry sfety functions re ctive t the user port, even if the control section is not operted. rimry sfety functions re ville in 3 different types. hese types cn e used in the sme crtridge cvity. -port s well -port cn e configured s specific primry sfety function. Code: N: : Z: Suction vlves port nd he suction vlve per userport prevents cvittion in the user line. xxxxx-fny xxxxx-sfny djustle port relief on port nd djustle primry port relief vlve prevents the user line ginst overpressure during opertion nd lso in neutrl position. he flow over the relief is mximum 330 l/min. he pressure setting rnge is r. Fctory pressure setting (first -port then -port) hs to e mentioned on configurtion code. djustle pressure setting only on one port, stte "-" for the other port. xxxxx-fy xxxxx-sfy Exmple: -port = 320 r nd -port = 280 r give orderingcode "G=320/280" -port = 320 r nd -port = no port relief give orderingcode "G=320/-" Shock/Suction vlves in port nd Comined shock/suction vlves prevents the user line to relief temporry pressure peks nd prevent cvittion. Fctory pressure setting (first -port then -port) hs to e mentioned on configurtion code. djustle pressure setting only on one port, stte "-" for the other port. Exmple: -port = 380 r nd -port = 320 r: "Z= 380/320 r" or for only -port = 380 r: "Z=380/- r" xxxxx-fzy xxxxx-sfzy Note: - If -port needs Z-function 280 r nd -port needs -function 280 r, plese note t the connection plte configurtion: "Z=280/-" nd "= -/280". - dditionl, options "F" nd/or "Y" cn e configured. N, or Z Y F 3. F Y Y Y Y N, or Z Y Y Y Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 13

14 CONRO SECION CONRO VVE 4. Customized version: Connection lock with 4 S-reliefs, 2 remote control connection nd 2 2/2-wy normlly closed electricl crtridges. Connection lock for comining the mount of 2 sectionl flow's to 1 common SE-port. Suction vlves or shock/suction vlves on / possile. Connection lock with S-reliefs nd 1 check vlve. he unique modulrity of the V enles systems solutions for mnufcturers of moile mchines, s wide rnge of functions cn e integrted/chnged y the customer in n esy, flexile nd cost-effective wy. Some exmples re shown elow. OJ E E OJ Spring nd endcp with doule control method electricl nd hydrulic proportionl. 14

15 CONRO VVE Doule endcp for common piloting of 2 sections together. Comintion V-16 nd V-22. V-22 vlve lock dded to specil size 32 mnifold. 14 Doule springcp for common piloting of 2 sections together. Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 15

16 END E 2 Code H: For control method H or O End plte for mnul or hydrulic operted vlves. 2 V..H O V..J 2 2 Code J: For control method E or O End plte with uilt-in pressure reducing vlve for internl pilot pressure supply of 28 r to the electricl pilot vlves of ech electricl proportionl control vlve or for externl pilot pressure supply of 28 r to the hydrulic joysticks. Note: he -connection hs to e connected s seperte drin to tnk. O 2 Code : With dditionl -port dditionl -port to connect n extr -line in systems with high pump flow. V..J H/ 22J 16

17 END E 0 V..J.. O V..J..Z M Ø Z 2 Code : With dditionl -port dditionl -port. Code Z: With Z-port Z-port to connect the S-signl of second vlve to the S-cscde of the first vlve, to e le to use the compenstor of the first vlve. Note: In systems with pumpflow > 380l/min use endplte with 2 port (Ordering code 22...). For reduction of the return pressure the use of the second tnk connection 2 on the end plte is possile (ordering code 22...). S S420 22FOJC200/220/F 16 22FOJC300/250/F O 22J2 Z 2 2 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 17

18 ICIONS Exmples Exmple inlet plte code U M U420 22FEMC300/300/ 22FEMC300/300/F 22FEMC300/300/ 22J3 Code U: Inlet plte for fixed displcement pump: 22U420 If none of the control sections re in opertion, the integrted 3-wy compenstor of the inlet plte 22U recircultes the flow to tnk. ctuting one of the control sections, the specific lod pressure is dded s signl to the spring chmer. ctuting more control sections t the sme time, the highest lod pressure will e dded (see shuttle vlve cscde system). he mximum lod signl pressure is controlled y the mx. lod pressure relief. If one or more of the users hve to e set on lower mx. pressure, the control section cn e configured with pressure reliefs per port (see for exmple the second section). Y Y M 1 Z 2 22U420 22FHC/ 22FHC/FY 22H2-Z 22N420 22FHC/ 22H- S 1 2 rllel circuit with fixed displcement pump: 22U nd 22N When two vlve locks should e mounted on different plces in system one vlve lock cn e configured with 22N inlet plte. he vlve lock with the 22U is regulting the pump flow nd the end plte 22-Z hs to e connected to the S port of the second vlve lock with 22N inlet plte. he mx. lod pressure relief of the 22N inlet plte hs to e djusted eqully or lower s the mx. lod pressure relief t the min inlet plte 22U

19 ICIONS Exmple inlet plte code N. Code N: 22N420 22FHFC150/200/ 22FHFC250/250/ 22FH330/330/ Inlet plte for S-pumps: 22N240 he version 22N is the inlet plte for the, nd S connection. he djustle mx. pressure relief for the lod signl is stndrd integrted. Series circuit with fixed displcement pump: 22U nd 22R For the sme condition s the prllel circuit series circuit cn e used. he dvntge of series circuit is tht there is not longer S signl line tht shll give lower signl under colder conditions. In the 22R inlet plte the tnk circuit is disconnected from the control sections nd there is n dditionl possiility of directing the pump flow from to R in order to feed nother circuit. lese note tht with this type of vlve lock the 2 connection in the end plte hs to e connected with tnk. M Ø M S 1 R 1 M U420 22FOJC/F 22FOJC/F 22FOJC/F 22H3J 22R420 22FOJM/ 22FOJM/F 22H2J O H3 2 2 O 2 2 Exmples Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 19

20 ICIONS Exmples Exmple inlet plte code S S S420 22FOJC330/330/F 22FOJC280/220/F 22J2 M Ø Code S: Inlet plte for S-pump: 22S420 he version 22S hs primry overpressure sfety function. he relief vlve cn e djusted to mx. pumpline pressure nd the relief spool reduces the overpressure y relieving the pump flow to tnk S 1 22N420 2 M Ø S N

21 ICIONS Y Y 1 S 1 Y Y Y Y Exmples 0 2 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 21

22 K In neutrl position ll ports locked, port lended O In neutrl position ll ports locked, port lended For WIN ody only: Q WIN C spool, (C in 1st section, in 2nd section) R WIN spool. (2 spools) Connection ports Mx. flow (l/min) (V-22) port / port S SE OR 2: 1 1/4" 330, (660) 20for WIN,2 3: 1 1/2" , : 1 1/4" , (500) for WIN S : 1/4" 6 5: 1/4" Y,Y 6: 1/4" : 1/4" 6 Z 7: 1/4" 30, grooved 6 spool only in comintion with mnul control - none re-tension (optionl) - none x 20 r DIMENSIONS ,5 155, ,8 68, ,5 Inlet plte Directionl control vlve End plte 81,5 14 Y 2 Z 22,2 34,7 35, , ,4 32, ,5 Y F Y F F Y F , , , ,7 M S 22

23 D WIN connectionlock SE OR E WIN connectionlock code 61 SE 1" flnge ** only on request Connection lock ody FY s/s + Y ports 1 For shock / suction Z1, 1,2,3 nd N1 with 'Y' port s/ included Mounting D1 for holes dump or M14 Elec x prop 17 relief in common signl s s D2 for dump or Elec prop relief in s nd s - none S pressure setting rnge E nd < 100 r 15 F nd > 100 r 30 G > 100 r < 100 r H <100 r > 100 r Crtridge -sdie / side only with ody: Z1 shock suction S/S 1 N1 suction /S 1 1 shock /S 1 XX dummy /S 1 ZC shock suction for WIN C1 NC suction for WIN C1 C shock for WIN C1 DIMENSIONS 145 Weight: Inlet plte 22N 22U/S/R Opt. D/E Opt. / 14 CRRIDGES NOG VERDER UI E REIDEN Oring type - UN N (stndrd) I VION H HNR Surfce tretment - none (stndrd) rotlloy Spool section 22FE* 22FE*M 22FH 22FOJ 22FOJM 14,5 End plte N , Directionl control vlve Weight: Connection lock FY FZY End plte 22H 22J ,5 35,8 N ,5 Inlet plte ,5 152 Weight ssemly kit: with 1 control vlve with 2 control vlve with 3 control vlve with 4 control vlve with 5 control vlve with 6 control vlve with 7 control vlve with 8 control vlve with 9 control vlve with 10 control vlve N 2,91 3,57 4,23 4,89 5,55 6,21 6,87 7,53 8,19 8,85 Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 23

24 DIMENSIONS Connection ports S Y,Y 0 Z S SE OR : 1 1/4" 20 : 1 1/2" 24 : 1/4" 6 : 1/4" 6 : 1/4" 6 : 1/4" V-22, 2 V-16, 2 : 1 1/4" 20 : 1 1/2" 24 : 1/4" 6 : 3/4" 12 : 3/4" 12 : 1/8" ,7 22,2 35,5 62 Z 120,5 2 83, ,5 40, , , ,5 End plte V-16 Inlet plte comi End plte V-22 Control vlve V-16 Control vlve V-22 66,5 69, ,5 31 Y 1 Y 14 49,4 65,4 44,75 2 F F F F 2 24,5 0 Y 1 0 Y , , ,1 2 Z

25 DIMENSIONS Mounting holes V-22: M14 x 17 Mounting holes V-16: M8 x ,5 27,5 31,7 9, , ,5 End plte V-16 Control vlve V-16 Inlet plte comi Control vlve V-22 End plte V Ordering code Dimension pplictions End plte Control vlve Inlet plte echnicl dt 25

26 CONFIGURION CODE INE E Size uild type K Sndwich Suplte ody type C Comi inlet V-22/16 type - stndrd V-22 type lte version U For fixed displcement pump UH For fixed displcement punp, high flow > 100 l/min S For S-pump nd mx. pressure vlve in N For S-pump nd S svety vlve R For fixed displcement pump nd seril connection RH For fixed displcement pump nd seril connection High flow ressure djustment in r 100 Mx 100 r 420 Mx 420 r ort connections & thred in S S & thred in SE OR SE Flnges comi options C Comi inlet V-22/16 type - 22 K - S O - - nti sturtion function S mplifier nti sturtion function / S mplifier comined - none Side options S O ump unloding function, normlly open C ump unloding function: normlly closed E prop pressure relief increse current, increse pressure F prop pressure relief increse current, decrese pressure - none cturtion 12 VDC 24 VDC H Mnul - none Oring type - UN N I VION H HNR Surfce tretment - none rotlloy 26

27 CONFIGURION CODE 22 K F N Q 1 - S H V W C S H E F J I H C D CONRO VVE R: SOO SECION Size 22 ild type Sndwich Suplte Compenstor With compenstor No compenstor Dummy lte 1 section Dummy plte 1/2 section Check vlve function none ody type Stndrd ody type high flow stndrd ody type (low Δ) 1,5 section wide ody type for esy mounting high flow 1,5 section wide ody type for esy mounting WIN ody type : 2 sections stndrd ody type Compenstor spring stndrd flow compenstor spring ow flow compenstor spring High flow compenstor spring Control ody Suitle for electric or hydrulic control 4/3 version Suitle for electric or hydrulic control 4/2 version for electric nd hydrulic control comined 1/4" S for electric nd hydrulic control comined SE OR 6 Mnul control For WIN ody only: Suitle for electric or hydrulic control, Comined (pilot) control Suitle for electric or hydrulic control, Dul (pilot) control 22 K F1 S H E M 24VDC F 24VDC with pin 12VDC E 12VDC with pin H 24VDC with II 2G Ex m II 4, flying leed O Hydrulic control 1/4" S Hydrulic control SE OR 6 only in comintion with mnul control (H) F spring returm friction rke R 3 position detent Connector type D - M ctuting type mp junior connector Deutsch connector** dditionl mnul control with E/O with control od E,F,J,I,C,D E,F,J,I,C,D E,F,J,I,C,D E,F,J,I,C,D E,F,J,I,C,D E,F,C,D E,F,C,D 27

28 CONFIGURION CODE C D G K O Q R CONRO VVE R: SOO SECION Min spool type ll ports locked in neutrl port locked in neutrl, port throttled to tnk (20%) & to tnk in neutrl (20% of nominl flow) port locked in neutrl, port throttled to tnk (20%) In neutrl position port + throttled flow to (20% ) In neutrl position ll ports locked, port lended In neutrl position ll ports locked, port lended For WIN ody only: WIN C spool, (C in 1st section, in 2nd section) WIN spool. (2 spools) C 2- / x Mx. flow (l/min) (V-22) port / port , (660) for WIN , (500) for WIN , grooved spool only in comintion with mnul control none re-tension (optionl) none 20 r 28

29 CONFIGURION CODE CONRO VVE R: CONNECION OCK FY F / Z1 / Z1 - - ort connections hred in S S hred in SE OR code 61 SE 1" flnges C WIN connectionlock 1,5" S D WIN connectionlock SE OR E WIN connectionlock code 61 SE 1" flnge ** only on request Connection lock ody FY s/s + Y ports 1 For shock / suction Z1, 1,2,3 nd N1 with 'Y' port s/ included D1 for dump or Elec prop relief in common signl s s D2 for dump or Elec prop relief in s nd s - none S pressure setting rnge E nd < 100 r F nd > 100 r G > 100 r < 100 r H <100 r > 100 r Crtridge -sdie / side only with ody: Z1 shock suction /S 1 N1 suction /S 1 1 shock /S 1 XX dummy /S 1 ZC shock suction for WIN C1 NC suction for WIN C1 C shock for WIN C1 CRRIDGES NOG VERDER UI E REIDEN Oring type - UN N (stndrd) I VION H HNR Surfce tretment - none (stndrd) rotlloy 29

30 CONFIGURION CODE END E Size ild type K Sndwich Suplte plte version H For mnul control only including 2 & 2 J For Electricl control including 2 & 2 C For use with comi inlet nd electric opertion vrints Z for S signl from other vlve ort connections hred in S S hred in SE OR SE flnges ie Rod kit ength 1--10,5 mount of sections (count V nd W sections for 1,5) Oring type - UN N (stndrd) I VION H HNR Surfce tretment - none (stndrd) rotlloy 16 K J Z

31 31

32 MC Hydrulic Fluid ower V. Kuiperweg J en ost he Netherlnds.O. ox en oer he Netherlnds el.: +31 (0) Fx: +31(0) sles@mc-nl.com

Bypass Compensator Cartridge, Size 16

Bypass Compensator Cartridge, Size 16 Bypss Compenstor Crtridge, Size 6 Q mx = 5 l/min, p mx = 42 br Direct cting, djustble compenstor spring Description These direct-cting bypss pressure-compenstor (hydrostt) crtridges, series DWDP-2B -6,

More information

Hot-Air Blowers 12 / / Hot-Air Blowers

Hot-Air Blowers 12 / / Hot-Air Blowers Hot-Air Blowers MISTRAL HOTWIND PREMIUM / HOTWIND SYSTEM MISTRAL Accessories HOTWIND Accessories VULCAN SYSTEM VULCAN SYSTEM Accessories IGNITER BM4/BR4 IGNITER BM4/BR4 Accessories 12 / 13 14 / 15 16 17

More information

* Different spooltypes up to 120 l/min. in combination with simultaneously control.

* Different spooltypes up to 120 l/min. in combination with simultaneously control. APV-16 Features. * Modular assembly system, suitable for 'Build Program'. * Max. operating pressure 420 bar. * Different spooltypes up to 120 l/min. in combination with simultaneously control. * Compact

More information

IFP C175-* REMOTE CONTROL RELIEF VALVE

IFP C175-* REMOTE CONTROL RELIEF VALVE IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)

More information

Hybrid Relief Valves

Hybrid Relief Valves Hyrid Relief Vlves Crtridge Type Pge Diret Ating Relief, Before Chek 7 Diret Ating Relief, After Chek 7 Pilot Operted, Blned Piston, Ventle, Relief, Before Chek 7 T-8A Pilot Operted, Blned Piston, Ventle,

More information

Workfit -SR, Dual Monitor Short Surface

Workfit -SR, Dual Monitor Short Surface User's Guide Workfit -SR, Dul Monitor Short Surfce Do not throw wy! Crdord locks needed for instlltion. Visit http://www.ergotron.com/workfi t-sr-instll for instlltion instructionl video. NOTE: 10 feet

More information

POWER COMBICON feed-through plugs mm pitch DFK-PC 16/...-ST(F)-10,16

POWER COMBICON feed-through plugs mm pitch DFK-PC 16/...-ST(F)-10,16 feed-through plugs 0.6 mm pitch DFK-PC 6/...-ST(F)-0,6 If 6 mm conductor is used, the new feed-through plug connector offers the possibility to trnsfer current of 76 A from inside the device to outside

More information

Valve Proving System for automatic Shutoff Valves

Valve Proving System for automatic Shutoff Valves LGY lve Proving System for utomtic Shutoff lves 11... The 11... vlve proving system is designed for use with shutoff vlves in connection with gs urners nd gs pplinces. n the event of indmissile lekge,

More information

Explosion-proof solenoid valves on/off and proportional controls - UL certification

Explosion-proof solenoid valves on/off and proportional controls - UL certification www.atos.com Table E125-10/E Explosion-proof solenoid valves on/off and proportional controls - UL certification DLHZ-T-040 valve body ex-proof solenoid ex-proof transducer (only for proportional -T valves)

More information

The Discussion of this exercise covers the following points: The open-loop Ziegler-Nichols method. The open-loop Ziegler-Nichols method

The Discussion of this exercise covers the following points: The open-loop Ziegler-Nichols method. The open-loop Ziegler-Nichols method Exercise 6-3 Level Process Control EXERCISE OBJECTIVE In this exercise, you will perform PID control of level process. You will use the open-loop step response method to tune the controller. DISCUSSION

More information

DNS. Monoblock directional control valves DNS - Directional control valve

DNS. Monoblock directional control valves DNS - Directional control valve Monoblock directional control valves DNS - Directional control valve DNS efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES 398SMD6I - 6--8 DNS echnical data Nominal flow

More information

Valve Proving System for automatic Shutoff Valves

Valve Proving System for automatic Shutoff Valves LGY lve Proving System for utomtic Shutoff lves... The... vlve proving system is designed for use with shutoff vlves in connection with gs urners nd gs pplinces. n the event of indmissile lekge, the system

More information

Connectors according to DIN / IEC

Connectors according to DIN / IEC E L E C T R O N I C C O N N E C T O R S Connetors ording to DIN 41612 / IEC 60603-2 56 ept GmH I Tel. +49 (0) 88 61 / 25 01 0 I Fx +49 (0) 88 61 / 55 07 I E-Mil sles@ept.de I www.ept.de Contents Introdution

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is

More information

Function. Valve Size. Pilot Oil. p min. Bold: Designates Tier I products and options.

Function. Valve Size. Pilot Oil. p min. Bold: Designates Tier I products and options. Catalog HY14-255/US echnical Information ilot Operated ressure Reducing Valves Series VMY*6 General Series VMY*6 valves consist of the main stage with valve spools and the pilot stage with the proportional

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is

More information

Explosion-proof solenoid valves on/off and proportional controls - ATEX or Rostechnadzor Russian certification

Explosion-proof solenoid valves on/off and proportional controls - ATEX or Rostechnadzor Russian certification www.atos.com Table E120-22/E Explosion-proof solenoid valves on/off and proportional controls - TEX or Rostechnadzor Russian certification DLHZ-T-040 valve body ex-proof solenoid ex-proof transducer (only

More information

Pressure reducing valves (with check valve) X(C)G, XGL

Pressure reducing valves (with check valve) X(C)G, XGL Pressure reducing vlves (with check vlve) X()G, XGL 3- Pressure ontrol Vlves unctionl Symbols XG XGL X XG X Vlve is used to set pressure in brnch circuit lower thn pressure of the circuit. y connecting

More information

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing

More information

VB-7253 Series. Application. Features. Applicable Literature

VB-7253 Series. Application. Features. Applicable Literature VB-7253 Series 1/2 to 2 Screwed NPT Stinless Steel Trim with Teflon Disc Stem Up Open, Two-Wy Vlves Generl Instructions Appliction VB-7253 series single set, stem down to close, two wy vlves control wter

More information

SO 9001 I ACCESSORIES

SO 9001 I ACCESSORIES ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2

More information

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US

More information

Inverse Proportional Pressure-Relief Cartridge, Size 10

Inverse Proportional Pressure-Relief Cartridge, Size 10 Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size

More information

INDUSTRIAL. AUTOMOTIVE. AUTOMATION. ENERGY EFFECTIVE ENERGY SOLUTIONS

INDUSTRIAL. AUTOMOTIVE. AUTOMATION. ENERGY EFFECTIVE ENERGY SOLUTIONS INDUSTRIL. UTOMOTIVE. UTOMTION. ENERGY EFFECTIVE ENERGY SOLUTIONS INTELLIGENT SOLUTIONS FOR MORE EFFICIENCY ND SFETY ENERGY SVING MODULE WITH LED INDICTION CE ND EN 161 CERTIFIED FLNGE OR THRED CONNECTION

More information

THERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS

THERMOFLO FLUID PUMPS& SYSTEMS THERMOFLO FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 SEALED SYSTEMS EXPANSION VESSELS PRESSURIZERS THERMOFLO S E A L E D S Y S T E M S THERMOFLO SEALED SYSTEMS FOR HEATING, COOLING AND WATER SUPPLY APPLICATIONS TO BS7074 EXPANSION VESSELS PRESSURIZERS PUMPS& SYSTEMS WALL OR BASE MOUNTING PRESSURIZERS

More information

How To Demonstrate Guide E24 & E26

How To Demonstrate Guide E24 & E26 Pre-Demonstrtion Checklist Clen the entire mchine Chrge tteries Check squeegee ldes Bring proper rushes nd/or pds Clening cost nlysis Prepre quottion with lese pyments E24 & E26 literture nd fct sheet

More information

Pilot valve PPCD04-PPRV DATA SHEET

Pilot valve PPCD04-PPRV DATA SHEET CLSSIC ilot valve CD4-RV D SHEE 294 297 Description SVB pilot valve is a small smooth valve, based on homas Magnetes propotional pressure reducing valve, that controls a limited-flow control feed to a

More information

IFP MGV03 PRESSURE REDUCING/ RELIEVING MODULE

IFP MGV03 PRESSURE REDUCING/ RELIEVING MODULE IF MGV03 RESSURE REDUCING/ ISO440-03 SIZE/NF D03 ESY DJUSLE MICROMEER KNO EXREMELY RECISE CONROL FOUR RESSURE RNGES VILLE DDED RESSURE RELIEVING FUNCION OIONL GUGE OR MGV-03- MGV-03- MGV-03- RESSURE REDUCING

More information

Inverted POWER COMBICON feed-through plugs mm pitch DFK-IPC 16/...-ST(F)-10,16

Inverted POWER COMBICON feed-through plugs mm pitch DFK-IPC 16/...-ST(F)-10,16 .6 mm pitch DFK-IPC 6/...-ST(F)-,6 In the inverted versions of the DFK-IPC 6 feed-through connectors, the screw connection on the device side is designed with femle insted of mle contcts.this gives touch-proof

More information

Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC

Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC www.atos.com Table -2/E Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification TEX, IEEx, E valve body spool ex-proof solenoid ex-proof inductive

More information

Electrically Operated Pressure-Relief Cartridge, Size 10

Electrically Operated Pressure-Relief Cartridge, Size 10 Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure a secondary part of a hydraulic circuit. Pressure is mataed

More information

005 Series Modular Valves

005 Series Modular Valves 5 Series Modular Valves ype of Modular Valve Class Graphic Symbols age Solenoid Operated Directional Valve DSG-5- *** - * - ressure Control Valves Flow Control Valves Directional Control Valves Modular

More information

Pressure reducing/relief valve, pilot operated type UZCP10

Pressure reducing/relief valve, pilot operated type UZCP10 ressure reducing/relief valve, pilot operated type UZC10 NS10 up to 1, Ma up to 80 dm /min D SHEE - OER RION MNU NUL WK 420 280 07.2014 LICION he pressure reducing/relief valve type UZC10 pilot operated

More information

Owner s Manual For TAC Series Planetary Gear Air Winches ORIGINAL TEXT

Owner s Manual For TAC Series Planetary Gear Air Winches ORIGINAL TEXT Red this Owner s Mnul thoroughly efore operting the equipment. Keep it with the equipment t ll times. Replcements re ville from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:

More information

SGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated

SGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility

More information

Directional Controls

Directional Controls Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System Sectional Design and Flow Sharing rinciple Reference: 31--959-EN-3 Stand: 9.216 1/2 2/2 31--959-EN-3/9.216 Contents age 1 General... 5 1.1 Description... 5 1.2 Advantages...

More information

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for Excavators Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

More information

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP) 4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31

More information

400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L

400 Series Flat Panel Monitor Arm Rotate Mount Double Pivot P/L User's Guide 400 Series Flt Pnel Monitor Arm Rotte Mount Doule Pivot P/L < 23ls. (10.44 kg) For the ltest User Instlltion Guide plese visit: www.ergotron.om 1 of 10 Hzrd Symols Review These symols lert

More information

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08 Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size

More information

Monoblock directional control valves ML - Directional control valve

Monoblock directional control valves ML - Directional control valve Monoblock directional control valves ML - Directional control valve ML Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD4I - 6--8 ML echnical data Nominal flow

More information

Valve Proving System for automatic Shutoff Valves

Valve Proving System for automatic Shutoff Valves 7 66 VVGYR Vlve Proving System for utomtic Shutoff Vlves 11... The 11 vlve proving system is designed for use with shutoff vlves in connection with gs burners nd gs pplinces. In the event of indmissible

More information

HD CONDUIT MIN. 10% FALL CHAMBER MONITORING SYSTEM HD CONDUIT REFER NOTE 13 SECTION C-C DETAILS OF BENCHING

HD CONDUIT MIN. 10% FALL CHAMBER MONITORING SYSTEM HD CONDUIT REFER NOTE 13 SECTION C-C DETAILS OF BENCHING FLOT SWITH DN50 upv PRESSURE FOR SENSOR TUING ( OVER) REFER TO 4 ND FLOT SWITH (50%) DN80 upv SUTION (600 OVER) GRVITY SEWER MINS FLL TOWRDS SUMP REFER TO NOTE 9 PLN (OVERS REMOVED) SLIDE GTE VLVE ± HMER

More information

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 D68 Series roportional Control Valves with Integrated Electronics ISO 441 Size 5 to 1 GENERL D681- D685 SECION GE MOOG SERVO- ND ROORIONL CONROL VLVES General 2 enefits and Functionality 3 General echnical

More information

diaphragm In-line service One pilot valve sub-assembly provides for any outlet set pressure, that is, 80 to 225 psi (5,5 to 15,5 bar)

diaphragm In-line service One pilot valve sub-assembly provides for any outlet set pressure, that is, 80 to 225 psi (5,5 to 15,5 bar) Worldwide www.tyco-fire.com Contacts Model PRV-1 Pressure Reducing Valve Pilot Operated, Globe and ngle ody Styles General Description The TYCO Model PRV-1 Pressure Reducing Valves, 2 through in. (DN5

More information

Owner s Manual. For TH330MR1 Hydraulic Winches Dedicated for Personnel Lifting

Owner s Manual. For TH330MR1 Hydraulic Winches Dedicated for Personnel Lifting Red this Owner s Mnul thoroughly before operting the equipment. Keep it with the equipment t ll times. Replcements re vilble from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com IMPORTANT:

More information

Hand & mechanical directional valves

Hand & mechanical directional valves www.atos.com Table E5-3/E Hand & mechanical directional valves ISO 44 sizes 6,, 6 and 25 H- Hand & mechanical operated directional valves are spool type, three or four way, two or three position valves,

More information

Introduction Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8

Introduction Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8 CURRENT Technology Page Introduction Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7 Section 8 Direct solenoid and solenoid pilot operated valves 9 Remote air valves 181 Mechanically

More information

Proportional Throttle Cartridges, Size 16

Proportional Throttle Cartridges, Size 16 Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact

More information

Lesson 8: Application Technology

Lesson 8: Application Technology The type of ppliction equipment used must suit the type of ppliction. In this module, you ll lern the prts of the most common types of ppliction equipment used by ssistnt pplictors, s well s how to properly

More information

Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve

Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve Flow Control Valves Series MTK, MTQ, MTC MTQ... MTC... robust, uncomplicated, reliable these valves do not require maintenance. This lowers costs and reduces the risk of a system failure. can be provided

More information

Directional spool valves type WE6 electrically. operated type WE6 series 32

Directional spool valves type WE6 electrically. operated type WE6 series 32 Directional spool valve electrically operated type WE6 series NS 6 up to 1,5 Ma up to 80 dm /min WK 40 970 06.011 LICION Directional spool valves type WE6 electrically operated are intended for change

More information

DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE MINIMUM CORE HOLE SIZE TO PULL PUNCHES WITH WINDOWS

DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE MINIMUM CORE HOLE SIZE TO PULL PUNCHES WITH WINDOWS MINIMUM CORE HOLE SIZE TO PULL PUNCHES WITH WINDOWS THE MINIMUM DIMENSIONS FOR THE HOLE IN THE PD REQUIRED TO INSERT THE PUNCH-PULLER ND THE BLL-LIFTER RE GIVEN IN THE TBLE BELOW. C CORE HOLE ØB MIN. SECTION

More information

MOUNTING SURFACE MOUNTING POSITION MAXIUMUM OPERATING PRESSURE FLUID OPERATING VISCOSITY FLUID CLEANLINESS HYSTERESIS REPEATABILITY THRESHOLD VOLTAGE

MOUNTING SURFACE MOUNTING POSITION MAXIUMUM OPERATING PRESSURE FLUID OPERATING VISCOSITY FLUID CLEANLINESS HYSTERESIS REPEATABILITY THRESHOLD VOLTAGE TYPICAL PERFORMANCE SPECIFICATIONS DESCRIPTION These proportional valves are direct operated pressure reducing valves. They can be used to control pressure in parts of a circuit. This valve incorporates

More information

PROPORTIONAL PRECISION PRESSURE REGULATOR REGTRONIC SERIES

PROPORTIONAL PRECISION PRESSURE REGULATOR REGTRONIC SERIES PROPORTIONL PREISION PRESSURE REGULTOR REGTRONI SERIES Proportional pressure regulators series REGTRONI have the job of precisely regulating the pressure in a system, the variables depending on the input

More information

The TYCO Model PRV-1 Pressure. Reducing Valves described herein must be installed and maintained in compliance with this document and with the

The TYCO Model PRV-1 Pressure. Reducing Valves described herein must be installed and maintained in compliance with this document and with the Worldwide www.tyco-fire.com Contacts Model PRV-1 Pressure Reducing Valve Pilot Operated, Globe and ngle ody Styles General Description The TYCO Model PRV-1 Pressure Reducing Valves, 2 through Inch (DN5

More information

ML OXIPRES INSTRUCTION MANUAL

ML OXIPRES INSTRUCTION MANUAL ML OXIPRES INSTRUCTION MNUL Version 2018.02.01 xel Kiers Vej 34-8270 Højbjerg - Denmark MIKROL RHUS /S Tlph: +45 86 29 61 11 - Fax: +45 86 29 61 22 - E-mail: ml@mikrolab.dk INDEX WRNING... page 2 DESCRIPTION...

More information

Fluid: Standard Hydraulic Oil F (49 C) Flow, Horsepower and Efficiency Charts Efficiency - % Power. Flow 113.

Fluid: Standard Hydraulic Oil F (49 C) Flow, Horsepower and Efficiency Charts Efficiency - % Power. Flow 113. Catalog HY13-5-2/US echnical Information erformance Data V Series iston umps ump Model Displacement 3 CC/REV (IN /REV) ump Delivery @ bar (1 SI) in LM (GM) RM 1 RM V6 6 (4.6) 91.2 (24.1) 134.4 (35.5) V1

More information

INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking:

INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking: direct operated INVERSE function available Q max = 2 l/min p max = bar INVERS Description EPDB The direct operated proportional pressure relief valve is built as a slip-in cartridge fitted in a connecting

More information

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31. F MODULES YUKEN's Modular Valves are stack type valves, and require no piping. hey not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking

More information

Flow Divider / Combiner Cartridge Valves

Flow Divider / Combiner Cartridge Valves Flow Divier / Cominer Vlves Type Pge Divie Only 9 Divier / Cominer, Close Centre 95 Synhronizing Divier / Cominer 96 Divier / Cominer, Close Centre, High 97 Int l Shortut Ctlogue #999-901-1 9 Flow Divier

More information

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Proportional Pressure-Relief Cartridge Valve, Size 2...4 Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges

More information

Contents TRIGONOMETRIC METHODS PROBABILITY DISTRIBUTIONS

Contents TRIGONOMETRIC METHODS PROBABILITY DISTRIBUTIONS ontents UNIT 7 TRIGONOMETRI METHODS Lesson 1 Trigonometric Functions................... 462 1 onnecting ngle Mesures nd Liner Mesures.............. 463 2 Mesuring Without Mesuring.........................

More information

Pump safety block type UHBT

Pump safety block type UHBT LICION ump safety lock type UH NS15, 25, 30 up to 35 a up to 400 D SHEE - OER RION NU NUL ump safety lock type UH is used to reduce the pressure, relieve the pump during start-up or operation. here is

More information

First Aid in School Policy

First Aid in School Policy First Aid in School Policy Approved y the Governing Body of West Monkton Church of Englnd Primry School: Reviewed y Governors nd Agreed: Septemer 2017 At West Monkton we im to e n inspirtionl community,

More information

Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)

Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm) Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min

More information

Owner s Man ual. For MTA1000 and MTA2000 Series Cycloidal Gear Air Winches

Owner s Man ual. For MTA1000 and MTA2000 Series Cycloidal Gear Air Winches Red this Own er s Mn u l thor ough ly e fore op er t ing the equip ment. Keep it with the equip ment t ll times. Re plce ments re vil le from Thern, Inc., PO Box 347, Winon, MN 55987, 507-454-2996. www.thern.com

More information

2/2-way proportional valve

2/2-way proportional valve 2/2-way proportional valve High sensitivity Type can be combined with 0... 16 bar DN 0.8... 4 mm 1/8, 1/4 or sub-base EEx approvals optional Type 8605 Digital control electronics Cable plug version Type

More information

Intrinsically safe solenoid valves on/off controls - ATEX certification

Intrinsically safe solenoid valves on/off controls - ATEX certification www.atos.com Table E130-17/E Intrinsically safe solenoid valves on/off controls - ATEX certification valve body valve spool intrinsically safe solenoid electrical connector manual override DHW-0611/WP/6

More information

Leak-Free Load-Control Valve SAE ½ psi flange

Leak-Free Load-Control Valve SAE ½ psi flange Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges

More information

SDM to 8 sections monoblock valve D1WWDA02A

SDM to 8 sections monoblock valve D1WWDA02A SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information

More information

W60 Spool & Sleeve Valves for ISO Bases (5599/I)

W60 Spool & Sleeve Valves for ISO Bases (5599/I) W60 Spool & Sleeve Valves for ases (59/I) 5/ Valves Single Solenoid Pilot Spring Return,7,,6 W60760 W6076 W60760 W6076 W60760 W6076 W6070 W607 * ase and electrical connector not included. 5/ Valves Double

More information

2/2-way proportional valve

2/2-way proportional valve 2/2-way proportional valve General purpose 0... 12 bar DN 0.8... 2.0 mm 1/8 or sub-base version Type 2824 can be combined with Type 805 Digital control electronics DIN-rail version Type 07 Cable plug Typ

More information

INVESTIGATION 2. What s the Angle?

INVESTIGATION 2. What s the Angle? INVESTIGATION 2 Wht s the Angle? In the previous investigtion, you lerned tht when the rigidity property of tringles is comined with the ility to djust the length of side, the opportunities for useful

More information

Electro-hydraulic Proportional Flow and Direction Control Valve

Electro-hydraulic Proportional Flow and Direction Control Valve lectro-hydraulic control valve his valve uses a D solenoid in a traditional 4- way solenoid valve to create a solenoid valve capable of both direction switching and highspeed control. he lineup consists

More information

* LANDING ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * LANDING ** RAMP FULL CURB HEIGHT MAY BE REDUCED TO ACCOMMODATE MAXIMUM SIDE FLARE SLOPE

* LANDING ROLLED CURB SIDEWALK RAMP TYPE R (ROLLED SIDES) * LANDING ** RAMP FULL CURB HEIGHT MAY BE REDUCED TO ACCOMMODATE MAXIMUM SIDE FLARE SLOPE * MXIMUM LNDING IS 2.0% IN ECH DIRECTION OF TRVEL. LNDING MINIMUM DIMENSIONS 5' x 5'. ** MXIMUM RMP CROSS IS 2.0%, RUNNING 5% - 7% (8.3% MXIMUM). "NON-WLKING" RE * LNDING 24" CROSS FULL WIDTH PERMNENT

More information

Workrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters

Workrite Sierra HX & HXL Assembly Instructions for 3-leg Electric Workcenters Workrite ierr HX & HXL Assemly Instrutions for 3-leg Eletri Workenters #1500216- Rev Workrite ierr HX & HXL Eletri Workenters - Assemly Instrutions for 3-leg les Rer Leg rket* Qty: 2 List of rts, grouped

More information

SystemStak Valves. ISO4401 Size 02

SystemStak Valves. ISO4401 Size 02 SystemStak Valves ISO441 Size 2 Reduce System Space Requirements SystemStak valves make compact hydraulic systems in which specific function valves are sandwich mounted between a directional valve and

More information

3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX

3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX /-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.

More information

Xpress L90LS Directional Control Valve. Catalog HY /UK December, 2001

Xpress L90LS Directional Control Valve. Catalog HY /UK December, 2001 Xpress L90LS Directional Control Valve Catalog HY17-8525/UK December, 2001 Catalogue HY17-8525/UK Technical Information Xpress - general information Xpress is a valve-customization service that enables

More information

Inverse Prop. Pressure-Relief Cart., Size 2 4

Inverse Prop. Pressure-Relief Cart., Size 2 4 Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in

More information

Stainless steel valves for corrosive environments & water base fluids

Stainless steel valves for corrosive environments & water base fluids www.atos.com Table E135-10/E Stainless steel valves for corrosive environments & water base fluids explosion-proof soleid valves, with tex, IEEx or UL US certification and pressure relief valves LOHX(S)6-3/M-O/V

More information

Fitted with a main pressure relief valve and a load check valve on every working section.

Fitted with a main pressure relief valve and a load check valve on every working section. SDS18 1 to 12 sectional directional control valve Fitted with a main ressure relief valve and a load check valve on every working section. Available with arallel and series-arallel (tandem) circuit. Otional

More information

M18x1,5 ISO Pilot operated pressure relief valve

M18x1,5 ISO Pilot operated pressure relief valve ressure relief valves ressure relief valve Screw-in cartridge ilot operated Q max = 25 l/min = 4 bar p N max = 35 bar ilot operated pressure relief valve as screwin cartridge with a thread M18x1,5 and

More information

4/2 way Pneumatic Solenoid Valve

4/2 way Pneumatic Solenoid Valve 4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11

More information

United States Patent (19)

United States Patent (19) United Sttes Ptent (19) Mobley (11) 45) Ptent Number: Dte of Ptent: Nov. 19, 1991 (54) BICYCLE RACK FORMOUNTING ON A VAN 76 Inventor: Mrk H. Mobley, P.O. Box 636, Norris, Tenn. 37828 21 Appl. No.: 436,492

More information

* SEE ANCHOR SCHEDULE SHEET 7

* SEE ANCHOR SCHEDULE SHEET 7 "-20 MLE PNELMTE W/ WINGNUT -1/2" O.C. "-20 X 1/2" MCHINE OLT & NUT -1/2" O.C 04/0/15 JH UPDTE TO 5TH EDITION (2014) FC 8/14/1 Y DTE SPCING ERROR OR MSONRY POWERS CLK-IN W/ "-20 SIDEWLK OLT -1/2" O.C.

More information

Directional Control Valves. Technical Information

Directional Control Valves. Technical Information Directional Control Valves echnical Information Using this manual Organization and headings o help you quickly find information in this manual, the material is divided into sections, topics, subtopics,

More information

CYLINDERS HYDRAULIC HOIST CYLINDERS

CYLINDERS HYDRAULIC HOIST CYLINDERS CYLINDERS HYDRULIC HOIST CYLINDERS The combination of strict machining tolerances, solid stop contact faces, and larger overlap between the stages has resulted in one of the strongest and most stable cylinder

More information

VSD03M DIRECTIONAL CONTROL VALVES

VSD03M DIRECTIONAL CONTROL VALVES NFPA SIZE D03 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e.

More information

Cooler-Bypass Thermostat Valve, Size 16

Cooler-Bypass Thermostat Valve, Size 16 Cooler-Bypass hermostat Valve, Size Q max = l/min, p max = bar emperature-controlled, integral relief function, various pressure settings available Description emperature-dependent bypass control Integral

More information

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Non-Refrigerated Universal Bi-Level AquaAccess Barrier Free, Wall Mounted Water Cooler

INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS Non-Refrigerated Universal Bi-Level AquaAccess Barrier Free, Wall Mounted Water Cooler INSTLLTION, OPERTION ND MINTENNCE INSTRUCTIONS Non-Refrigerated Universal i-level quaccess arrier Free, Wall Mounted Water Cooler OR lternate Configuration Standard Configuration 112100F-UL / 112100-UL

More information

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 D68 Series roportional Control Valves with Integrated Electronics ISO 441 Size 5 to 1 GENERL D 6 8 1 - D 6 8 5 SECION G E MOOG SERVO- ND ROORIONL CONROL V LV E S General 2 enefits and Functionality 3 General

More information

PENTAIR/PAC FAB HI-FLOW, 2" PENTAIR/PAC FAB 2" PVC SLIDE VALVE

PENTAIR/PAC FAB HI-FLOW, 2 PENTAIR/PAC FAB 2 PVC SLIDE VALVE PENTIR/PC F HI-FLOW, " MODELS 0, 00, E-0 COMPLETE HI FLOW VLVE, 0 NO PLUMING -0 COMPLETE VLVE W/ PLUMING 00 SND FILTER VERSION 00- COMPLETE VLVE W/ PLUMING DE -0 HNDLE, VLVE 0-0 SCREW, HNDLE S.S 0-0 WSHER,

More information

LK4420BFFR - FTN, 4420BFFR - FTN. Owners Manual

LK4420BFFR - FTN, 4420BFFR - FTN. Owners Manual Owners Manual 4420 Bottle Filler Freeze Resistant Tubular Fountain with 98837C or 98838C Dual Valve Control ssembly MODEL 4420BF1LFR MODEL 4420BF1UFR MODEL 4420BF2FR ITLLER 4420BFFR Fountains are among

More information

Biomechanical Analysis of Pressure Redistribution

Biomechanical Analysis of Pressure Redistribution Biomechnicl Anlysis Redistribution Dul PegAssist Conur Bllet-Style Sports (neutrl shoe) Dul Chrcteristics Dul + Generl PegAssist + Conur All mpping results re bsed upon following prmeters: Test Person

More information

IGF Research Project N Safer High Heels

IGF Research Project N Safer High Heels IGF Reserch Project 17868 N Sfer High Heels Survivl of compnies in the fshion nd sesonlly dependent sectors such s the footwer industry depends upon their ility to implement the ltest trends. Shoe ottoms

More information