GOLDEN TOTAL S RULES. total.com
|
|
|
- Patience Patrick
- 6 years ago
- Views:
Transcription
1 total.com Total is the world s fourth-ranked international oil and gas company (1) and a global leader in solar energy through our affiliate SunPower. We discover, produce, transform, market and distribute energy in a variety of forms, to serve the end customer. Our close to 100,000 employees in more than 130 countries are committed to better energy. (1) Based on market capitalization (in U.S. dollars) at December 31, TOTAL S GOLDEN RULES SAFETY AT WORK HSE Division TOTAL S.A. Headquarters: 2, place Jean Millier La Défense Paris-La Défense Cedex France Tel. +33 (0) Share capital: RCS Nanterre Total s Golden Rules - 2 Brochure REGLE 2017_UK.indd 1-2
2 Objectives SAFETY AT WORK TOTAL S GOLDEN RULES To prevent occupational accidents and protect lives, we must: Share the basic rules that everyone should know and apply. Strengthen prevention by encouraging people to step in whenever they see something being done unsafely. Stop work if the risk is not being properly managed. Report anomalies. Editorial Safety is a core value, the cornerstone of our operational excellence and that of our partners. All accidents can be prevented, even though our activities present a variety of risks. Shared rules are vital to prevention. Our Golden Rules on safety at work are based on feedback and experiences. They set out what must and must not be done. All Total stakeholders our own employees and contractors alike are required to apply them. Everyone must ensure buy-in, strict compliance and field checks. In the event of unsafe actions or situations, the Stop Card gives the authority to step in and stop ongoing work, especially in the case of failure to comply with one of these rules. I firmly believe that applying the Golden Rules stringently "for me, for you, for all" will lift our safety culture, aligning it with Total s stated ambition of being recognized as an industry benchmark in this area. Patrick Pouyanné, Chairman & Chief Executive Officer 2 - Total s Golden Rules Brochure REGLE 2017_UK.indd 2-3 Total s Golden Rules - 3
3 Total s Golden Rules Appropriate steps set out in a recognition and sanction policy will be taken in response to any breach of the rules, which are expressed as 50 instructions on what must and must not be done. Anyone that: Flagrantly breaks a safety rule Refuses to obey an order in the event of immediate danger will immediately be removed from the work in progress and be subject to appropriate disciplinary action. 4 - Total s Golden Rules Brochure REGLE 2017_UK.indd igh-risk H Situations 7 owered P Systems 2 Traffic 8 C onfined Spaces 3 Body Mechanics 9 Excavation Work 4 Protective Equipment 10 W ork at Height 5 ork W Permits 11 C hange Management 6 L ifting Operations 12 S imultaneous Operations or Co-Activities and Tools Total s Golden Rules - 5
4 RULE 1 RULE 2 HIGH-RISK SITUATIONS TRAFFIC Smoke outside designated areas. Work or drive under the influence of alcohol. Work or drive under the influence of drugs. Exceed the speed limit and authorized driving time. Use a mobile phone, even with a hands-free kit, while driving. Assess all risks prior to the start of non-routine or complex operations or in downgraded situations. Check condition and conformity of vehicles and machinery before use. Report all downgraded situations to management, monitor them, take appropriate measures to mitigate the risks and formally notify the personnel concerned. Wear your seat belt. Use designated pedestrian paths/sidewalks and hold the handrail when taking the stairs. Follow start-up and shutdown procedures and check progress. 6 - Total s Golden Rules Brochure REGLE 2017_UK.indd 6-7 Total s Golden Rules - 7
5 RULE 3 RULE 4 BODY MECHANICS AND TOOLS PROTECTIVE EQUIPMENT Use defective tools or tools not intended for the task or the area where the work is being performed. Use a tool, including those for pressure tests, under conditions that exceed the manufacturer s specified design limits. Use the tools specified in the work permit or procedures and adapt your body mechanics to the tool rating and repetitive nature of the task. 8 - Total s Golden Rules Brochure REGLE 2017_UK.indd 8-9 Cross a barrier or reposition protective equipment without authorization. Wear the designated personal protective equipment (PPE) for the area and task and check its condition before use. Wear a life jacket whenever required. Report any damage to or malfunctioning of safety barriers. Total s Golden Rules - 9
6 RULE 5 RULE 6 WORK PERMITS LIFTING OPERATIONS Perform any work without an approved work permit. Walk or stand under a suspended load. Assess risks before starting work. Perform a risk assessment, implement the lift plan and clearly mark out the area. Use any required additional permits. Ensure all lifting equipment and gear is fit for purpose, in good condition and regularly inspected. Re-issue a work permit if the conditions on the original permit change or the work procedure is modified. Check that the load is securely slung and bundled Total s Golden Rules Brochure REGLE 2017_UK.indd Designate a signaler and control the moving load at all times. Total s Golden Rules - 11
7 RULE 7 RULE 8 POWERED SYSTEMS CONFINED SPACES Begin any work until you have checked that all energy and fluid sources have been isolated, unless you are specifically authorized to do so. Enter a confined space without checking isolations and all atmospheric hazards. Follow the isolation plan and supervision instructions attached to the work permit. Check all isolations, locks and tags before performing any work and remove them before restarting operations Total s Golden Rules Brochure REGLE 2017_UK.indd Cover suffocation, falls, explosion, crushing, drowning and other risks in the specific work permit. Ensure that you will be continuously monitored. Have an emergency response and rescue plan. Total s Golden Rules - 13
8 RULE 9 RULE 10 EXCAVATION WORK WORK AT HEIGHT Place machinery or spoil piles within one meter of a trench being excavated. Perform excavation work with a permit comprising a map of all buried hazards. Apply precautions for work in confined spaces, as necessary. Clearly mark all excavation areas and identify underground structures. under or near power Work lines without respecting the minimum safe clearance distance. on building or tank roofs without first checking Work their integrity and ensuring that the appropriate protective devices have been installed. a deployed mobile elevated work platform (MEWP), Move unless you are specifically authorized to do so. Put away tools when working at height (above 2 meters). Use a safety harness that is safely anchored, outside fixed barriers or in an MEWP. Use scaffolding that is fit for purpose and has been inspected Total s Golden Rules Brochure REGLE 2017_UK.indd Total s Golden Rules - 15
9 RULE 11 RULE 12 CHANGE MANAGEMENT SIMULTANEOUS OPERATIONS OR CO-ACTIVITIES Make technical or organizational changes without getting prior authorization. Perform simultaneous operations or coactivities without completing a preliminary field check. Have a risk assessment and apply mitigation measures. Give workers appropriate training and update all relevant documentation. Conduct a risk assessment with the personnel concerned. Increase supervision and appoint a duly authorized coordinator Total s Golden Rules Brochure REGLE 2017_UK.indd Total s Golden Rules - 17
10 In the event of an unsafe situation, particularly noncompliance with a Golden Rule, you must step in. This shared vigilance helps us to improve safety together. One measure is the Stop Card, which gives everyone working at the company employees and contractor personnel alike the authority to step in and stop ongoing work if they feel that actions or situations are unsafe or have the potential to lead to an accident. Raising a problem or asking a question will not lead to sanctions. INTERVENONS POUR LA SÉCURITÉ Bronx Agence (Paris) Stop Card Photos usine de Feluy (Belgique) - crédits : Total / B. Uhart DE TOUS 18 - Total s Golden Rules Brochure REGLE 2017_UK.indd Brochure published by the HSE Division, prepared in cooperation with the businesses Design and Production: Photo credits: P. Dureuil, K. Gerhardt/Capa Pictures, T. Gonzalez, M. Labelle, V. Miloserdov, J. Muguet, V. Paul, H. Piraud, M. Sowinski, B. Uhart, L. Zylberman TOTAL First issue: April 2010 Reprinted: March 2017
Based on market capitalization (in U.S. dollars) at December 31, 2015.
total.com Total is the world s fourth-ranked international oil and gas company (1) and a global leader in solar energy through our affiliate SunPower. We discover, produce, transform, market and distribute
We also ask our subcontractors and partners to. At EHS Support we re passionate about safety. The. ensure the safey of themselves, their coworkers and
Golden Rules of Safety July 2014 EHS Support s commitment to environmental, health, At EHS Support we re passionate about safety. The We also ask our subcontractors and partners to ensure the safey of
Safety at Work. Rules for Staying Alive
Safety at Work Rules for Staying Alive Safety at Work Rules for Staying Alive Introduction The purpose of Dana Gas Rules For Staying Alive is to address the key causes of deaths in our industry. These
SLIPS, TRIPS & FALLS. Golden Rule No. 2 "Traffic"
SLIPS, TRIPS & FALLS Golden Rule No. 2 "Traffic" EDITORIAL ach time that someone is in a standing position, there is Ea risk of a fall. When combined with any other activity, the risk is multiplied tenfold.
Responsibilities / Accountability
Responsibilities / Accountability What we will cover Brief history of OPP safety program OPP s commitment to safety Safety responsibilities Accountability for safety Employee expectations History of Safety
A MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
We live by the Life Saving Rules so that everyone goes home safe, every day.
We live by the Life Saving Rules so that everyone goes home safe, every day. OUR COMMITMENT STATEMENT: As a TransCanada employee or contractor performing work on behalf of TransCanada, I will adhere to
Contractor/Visitor Safety Orientation UNBC
Contractor/Visitor Safety Orientation UNBC 3333 University Way, Prince George, BC V2N 4Z9 Revised: October 2015 For All Emergencies call Security 250-960-7058 ***DO NOT DIAL 911*** Important UNBC Telephone
We take safety very personally at Aurecon. Safety is everybody s business, every day. Health and safety incidents are not inevitable, they are
Safety Essentials We take safety very personally at Aurecon. Safety is everybody s business, every day. Health and safety incidents are not inevitable, they are preventable. Supporting the Health and Safety
GOLDEN SAFETY RULES AFT DR
GOLDEN SAFETY RULES The Golden Safety Rules exist to keep you safe Your safety and the safety of your workmates is paramount. The Golden Safety Rules exist, above all else, to keep you safe. Since we adopted
Contractor handbook. Purpose
Page no: 1 / 6 Contractor handbook Purpose Mitie aims to ensure that the highest levels of performance are achieved by all persons working for us or on our behalf. We require the same level of performance
OGP Supplementary Life-Saving Rules
OGP Supplementary Life-Saving Rules Prevent dropped objects Position yourself in a safe zone in relation to moving and energised equipment 9. 10. 14. 15. Do not work under or near overhead electric power
Safety is a priority at Vault Pipelines.
Safety is a priority at Vault Pipelines. At Vault Pipelines we believe that every incident is preventable and that every task can be completed safely and efficiently. We will achieve this through our cultural
Our commitment to safety
2 Our commitment to safety At South East Water, we have an absolute commitment to achieving and maintaining a safe and healthy workplace for our people, including our contractors and stakeholders which
GOLDEN RULE 10 WORK AT HEIGHT
WORK AT HEIGHT This document compiles practical sheets for use by Group employees and contractor personnel to help them manage work at height while strictly observing the musts and must nots of Golden
Lenzing Life Saving Rules
Lenzing Life Saving Rules Bringing Safety Home As we strive to become the safest business amongst our peers, we have discovered that our perception of our safety appears to be skewed. In reality our safety
SASOL LIFE SAVING RULES (LSRs)
SASOL LIFE SAVING RULES (LSRs) Zero harm by following Life Saving Rules Adhere to fall protection requirements at all times when WORKING AT HEIGHTS Obey all traffic rules while driving and walking for
Health & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review 1.1 Approved 10.01.2017 David Maine
1 AIM 2 4 REASONS FOR INCLUSION 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6
CONTENTS PAGE 1 AIM 2 2 APPLICATION 2 3 DEFINITIONS 2 4 REASONS FOR INCLUSION 3 5 REQUIREMENTS 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6 APPENDIX
Permit-To-Work Guidance and Templates
Managing Contractors Policy - Appendix E Permit-To-Work Guidance and Templates This document has been constructed to provide guidance in how to use a permit to work correctly. The first part explains the
Module: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
GOLDEN RULE 10 WORK AT HEIGHT
GOLDEN RULE 10 WORK AT HEIGHT This document compiles practical sheets for use by Group employees and contractor personnel to help them manage work at height while strictly observing the musts and must
FALL PROTECTION / ELEVATED WORK
SEPTEMBER CORE REFRESHER HSE TOOL BOX FALL PROTECTION / ELEVATED WORK FALL PROTECTION Falls from elevations are one of the most common causes of death in this industry. OSHA requires fall protection when
ISS Safety Rules. Make safety second nature
ISS Safety Rules Make safety second nature 2 ISS SAFETY RULES ISS SAFETY RULES 3 INTRODUCTION We are a company driven by close to 500,000 strong people spread across 77 countries around the globe. And
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
B S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
OSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant
OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards
CONSTRUCTION SAFETY PROGRAM FOR. Golder Acoustics Inc.
CONSTRUCTION SAFETY PROGRAM FOR Golder Acoustics Inc. TABLE OF CONTENTS Topic... Page Safety and Health Policy... 2 Safety and Health Objectives... 3 Job Site Inspections... 4 Contractor Safety Administrator...
Safety Essentials. Mandatory rules for our high risk activities
Mandatory rules for our high risk activities Remember... Only undertake activities for which you are trained, competent and authorised to do Before you start a job take a step back, think about all the
Code of Practice and Instructions to Contractors Working for Viridor
Date of issue: 20 Code of Practice and Instructions to Contractors Working for Viridor Prepared by: Ian Powell Head of Safety Management 4.6.3 Revision: 2.0 Contents Introduction... 2 Legal obligations...
LIFE SAVING RULES EXPLANATION GUIDE EDITION #1.0
2018 LIFE SAVING RULES EXPLANATION GUIDE EDITION #1.0 ABOUT ENERGY SAFETY CANADA Energy Safety Canada is the national safety association for the oil and gas industry. We develop and support common industry
EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
SUBJECT: LIFTING OPERATIONS AND LIFTING EQUIPMENT (LOLER)
SUBJECT: LIFTING OPERATIONS AND LIFTING EQUIPMENT (LOLER) 1.0 INTRODUCTION The purpose of this procedure is to give direction on the responsibilities and requirements related to UK legislation covering
S31 Opening Statement Working at Height
S31 Opening Statement Working at Height Falls from height are by far the most common cause of workplace deaths and one of the main causes of major injury in the workplace. Latest figures reveal that 46
Scissor Lift Safety Policy Training Course (GS600) Material
Introduction Welcome to the Scissor Lift Safety (GS600) Policy Training Course. This training is for all individuals who work in scissor lifts as a part of their duties. This course is to provide general
UK Contractors Group Mobile Elevating Work Platforms Good Practice Toolkit June June 2015 Page 1 of 16
UK Contractors Group Mobile Elevating Work Platforms Good Practice Toolkit www.ukcg.org Page 1 of 16 Contents Foreword Reference Material Initial Considerations Planning and Preparation for MEWP Activities
Join t Op e ra tion s CHESM Fie ld I n s p e ction Ch e cklis t
JO CHESM Field Inspection Checklist Join t Op e ra tion s CHESM Fie ld I n s p e ction Ch e cklis t This checklist provides a format for the recording of observations at work sites visited during the inspection.
DISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY ATTACHMENT M SAFETY PROVISIONS GOODS AND SERVICES CONTRACTS
DISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY ATTACHMENT M SAFETY PROVISIONS GOODS AND SERVICES CONTRACTS Page 1 of 6 RFP 16-PR-DEM-33 Comprehensive All-Hazards Risk Assessment The Contractor shall comply
This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall protection equipment.
Page 1 of 7 REFERENCES Personal Protective Equipment Standards 1.31 PURPOSE This subject outlines procedures to prevent accidents or injuries to you and others from inappropriate selection and use of fall
Potential risk of injury to staff
Register Fire, Earthquake - other Emergencies Manual Handling and Repetitive Work Repetitive, Forceful Work Poor Housekeeping Not Wearing PPE (Personal Protective Equipment) Potential risk of injury to
Total s Golden rules
Total s Golden rules Golden rule No. 12: Simultaneous operations or co-activities This presentation resumes in part the document that won an award at the 2011 World Day for Safety at work, written by:
Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
Suitability of Work Equipment
These regulations came into effect on the 5th December 1998 and replace PUWER 1992. They cover almost all equipment used at work, including tool box tools such as hammers, knives etc. They also cover machinery
Work At Height Health & Safety Management Standard Issue 3 (April 2011)
Work At Height Health & Safety Management Standard Issue 3 (April 2011) Introduction This document contains corporate standards and guidance on the management of risks arising from work at height. It is
Contractor / Exhibitor Handbook
Contractor / Exhibitor Handbook Health and Safety This booklet outlines the basic rules that must be followed by contractors and other visitors working on Live Promotions Events sites. The contractors
COREWEST DIAMOND DRILLING LTD. * ENVIROMENT, HEALTH AND SAFETY PROGRAM* APPENDIX A GENERAL WORKSAFE PRACTICES
COREWEST DIAMOND DRILLING LTD. * ENVIROMENT, HEALTH AND SAFETY PROGRAM* APPENDIX A- - - - - - - GENERAL WORKSAFE PRACTICES 1) HEALTH AND SAFETY POLICY 2) PERSONAL PROTECTIVE EQUIPMENT 3) HOUSEKEEPING 4)
EXHIBITION Guide. Roles and Responsibilities OS11. A handbook for exhibitors and contractors
Appendix 1 Health & Safety Declaration, Roles and Responsibilities Each exhibitor and Informa appointed contractor must complete the Health and Safety Declaration form provided below to confirm they have
Application 15.1 This Part applies to every workplace where a worker works in a confined space.
PART 15 CONFINED SPACES GENERAL REQUIREMENTS Application 15.1 This Part applies to every workplace where a worker works in a confined space. Safe work procedures 15.2(1) An employer must (a) develop and
Confined Space in Construction
Confined Space in Construction 1926.1201 1926.1213 Confined space means a space that: 1. Is large enough and so configured that an employee can bodily enter it; 2. Has limited or restricted means for entry
??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
(Health, Safety, and Welfare)
An Appreciation of The Construction (Health, Safety, and Welfare) Regulations 1996 Course Notes Mark Mallen Health and Safety Manager Fenlock Hansen Ltd October 2002 The Construction Regs 1996: Version
Safe Work Practices and Permit-to-Work System
CHAPTER 24 Safe Work Practices and Permit-to-Work System 24.1 INTRODUCTION OSHA s Process Safety Management (PSM) Standard (OSHA, 1992) requires employers to develop and implement safe work practices (SWPs)
Health & Safety Contractor rules
Health & Safety Contractor rules Contents 1. Introduction... 1 2. The legal bit explaining our terminology... 1 2.1 Legal requirements... 1 3. Our health and safety requirements... 1 3.1 Access to BT premises...
Minimum Safety Requirements for Contractors Working on Railway Property
Minimum Safety Requirements for Contractors Working on Railway Property Effective_ April 1, 2007 Introduction Canadian Pacific is committed to provide a Safe and Healthy working environment for all Railway
CONTRACTOR SAFETY RULES
CONTRACTOR SAFETY RULES CONTRACTOR SAFETY RULES AND REGULATIONS This manual sets forth policy with regards to contractor safety. Each Quinn facility consists of one or several diverse operations under
JOB HAZARD ANALYSIS (JHA)
JOB HAZARD ANALYSIS (JHA) JHA Preparation Instructions: JHAs are to be prepared by the Supervisor or Group Manager in charge of the work, with work group member participation. The goal of preparing a JHA
MAGB HEALTH and SAFETY GROUP Working In Confined Spaces
MAGB HEALTH and SAFETY GROUP Working In Confined Spaces SCOPE: This document represents best practice advice available and considered pertinent after consultation within the membership and incorporating
At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest.
0 At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest. We will review the hazards associated with fall protection and how to mitigate
Contractor OHS Induction. AOHS-05-GUI September 2016
Contractor OHS Induction AOHS-05-GUI-002 8 September 2016 1 About AQWEST AQWEST is a Government Trading Enterprise responsible for supplying drinking water to Bunbury. Formed in 1906 as the Bunbury Water
HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT
HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT INTRODUCTION Cwmni CYNNAL recognises that accidents can arise from working at height. Falls from height can be a cause of injury and absence
Safety, health and environment values that are expected of all persons who are working and visiting the Quattro Ports Port Kembla Grain Terminal,
Overview In accordance with the Quattro Ports Safety, Health and Environmental Policy - Safety First is paramount to Quattro Ports. Our employees and contractors are our most important asset and their
Confined Space Entry Program Guidelines (Human Resources - Health and Safety Department)
Confined Space Entry Program Guidelines (Human Resources - Health and Safety Department) Introduction The Thames Valley District School Board, through the Health and Safety Policy is committed to providing
Contractor Code of Conduct
Application This procedure and associated documents are based on Health, Safety and Environmental best practice. Additional guidelines may be required within countries where local and / or in-country regulations
1. Objective of the initiative To ensure that all employees and subcontractors are aware of the risks associated with working at height.
Safety Initiative 02 Working at Height May 2011 CONTENTS 1. Objective of the initiative 2. Overview. 3. Implementation 4. Duties 5. Hierarchy of Controls 6. Workplace Inspections 7. Fragile Surfaces 8.
THE CONSTRUCTION (HEALTH, SAFETY AND WELFARE) REGULATIONS 1996
A G U I D E T O THE CONSTRUCTION (HEALTH, SAFETY AND WELFARE) REGULATIONS 1996 C ONSTRUCTION (H EALTH, S AFETY AND W ELFARE) C INTRODUCTION The Construction (Health, Safety and Welfare) Regulations 1996
1.1 OHS Policy and Responsibilities
1.1 OHS Policy and Responsibilities At Canadian Rope Access Specialists Inc. safety is our primary concern and the health and safety of our employees, clients and contractors is of paramount importance
Risk Assessment Form (Qualitative)
Assessment Form (Qualitative) Project / ocation:..d.a.s WATERS Contract No: RA & Issue No: 008 Prepared by:.r.smit Date: 10/10/16 Signature: ACTIVITY DESCRIPTION: Person (s) at risk: General Ground works
: Electric Power Generation, Transmission, and Distribution. Region IV - OSHA
1910.269: Electric Power Generation, Transmission, and Distribution Region IV - OSHA Scope This standard covers the operation and maintenance of electric power generation, control, transformation transmission,
Working Safely on Overhead Lines
A practical guide to Working Safely on Overhead Lines W.S. ON OVERHEAD LINES.indd 1 17/12/07 10:58:31 A practical guide to Working Safely on Overhead Lines National Grid Eakring Technical Training Centre
Temporary load-bearing support for structural alterations or repairs
CRITICAL NOTE This document only becomes a Safe Work Method Statement where the High Risk Construction Work section of this document is completed Company: ABN: Contact Person: Ph: Project/Site: Principal
Welcome to the CHALLENGER SAFETY Induction
Welcome to the CHALLENGER SAFETY Induction Completing the Course This induction is to give employees/contractors the general information on how safety is managed and an overview of the permitting and reporting
FALL PROTECTION AND RESCUE PLAN NS-MAYPORT BLDG RENOVATION PROJECT. (Revised Copy 11/19/2010)
FALL PROTECTION AND RESCUE PLAN NS-MAYPORT BLDG. 1553 RENOVATION PROJECT (Revised Copy 11/19/2010) 1 TABLE OF CONTENTS 1.0 SCOPE AND PERSONNEL RESPONSIBLE FOR THE PLAN 2.0 STATEMENT OF COMPANY POLICY 3.0
Geotechnics, Face and Stockpile Operations
Quarries National Joint Advisory Committee (QNJAC) Geotechnics, Face and Stockpile Operations Information Sheet 4 October 2012 Duties of the Operator This information sheet has been developed by the Quarries
2.0 Management Systems and Documentation
SHE Rules BOW142.3 1.0 Introduction This document details the safety, health and environment rules that apply to anyone accessing Arqiva sites and describes the standards of performance expected. This
Confined Space Management
Confined Space Management Latest revised date: October 26, 2011 Page 1 of 8 1.0 Preamble Memorial has implemented workplace procedures to prevent unauthorized and unsafe confined space entry to guide the
HS26 Working at Height Policy and Procedure
HS26 Working at Height Policy and Procedure HS26: Working at Height Policy and Procedure v2-0.jun 2016 Page 1 of 8 1. Scope This policy applies to all staff, students and visitors to The Shared Learning
Work at height Policy
Work at Policy Introduction This policy procedure outlines the Forces responsibility to provide guidance to all police officers and staff when working at. Many serious incidents involving working at occur
You must NOT touch any equipment unless you are authorised to work on or with that equipment and you have followed correct safety procedures.
SYDNEY TOWN HALL 1 HIRER & CONTRACTOR SAFETY FACT SHEET Issue 2 September 2013 www.sydneytownhall.com.au City of Sydney - Venue Management will provide and maintain a safe working environment for the health,
Escondido Union High School District. Hazard Communication Plan
Escondido Union High School District Hazard Communication Plan Updated June 2017 Table of Contents Introduction. 2 Globally Harmonized System (GHS). 2 Hazardous Substance Inventory. 3 Safety Data Sheets
O&M MANUAL HIGHLIGHTS
O&M MANUAL HIGHLIGHTS GENERAL PROVISIONS Each pipeline must be operated according to this SUBPART 192.603(a) RECORDS 192.603(b) Keep records necessary to administer the procedures of 192.605 RECORDS Life
SCOUTS AUSTRALIA NSW
SCOUTS AUSTRALIA NSW Contractor Health and Safety Handbook 2 Scouts Australia NSW Contractor Safety Handbook v 5.0 Frebruary 2018 Contents... 2 Contractor Health and Safety Handbook... 2 Revisions... 2
Harbour Town Gold Coast Site Induction
Harbour Town Gold Coast Site Induction At Harbour Town Gold Coast we believe that safety is integral to the way we do business. We are committed to operating a safe environment for all where we are incident
Safety Management System. Initial Revision Date: Version Revision No. 02 GENERAL SAFETY HEALTH PROVISION
Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 5 Purpose This program is written to be in compliance with local regulatory requirements and provide directives
List all key terms and acronyms used in the procedure, and their definitions.
Purpose The purpose of this procedure is to provide guidelines for electrical safety in general within Seqwater in compliance with the Electrical Safety Act 2002, Industry Codes of Practice, Regulations,
FALL PROTECTION PLAN July 2012
FALL PROTECTION PLAN July 2012 Office of Police and Safety (423)323.0255 Introduction In the construction industry in the United States, falls are the leading cause of worker fatalities. Each year, on
The Johns Hopkins University/The Johns Hopkins Hospital Health, Safety and Environment Manual Safety Policies:
Page 1 of 6 Keywords: Airborne Combustible, Atmospheric Monitoring, Atmospheric Oxygen, Authorized Entrant, Body Harness, Combustible Gas Meter, Communication Procedure, Confined Space, CPR, Entry, Entry
The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees
LOCK-OUT / TAG-OUT SYSTEM & PROCEDURE
Date Adopted 8/04/2008 Due for Review 8/4/2009 Business Unit HR & Safety Current Policy Date 8/4/2008 LOCK-OUT / TAG-OUT SYSTEM & PROCEDURE 1.0 PURPOSE 2.0 SCOPE To prevent injuries to persons or damage
ENTRANT, ATTENDANT & QUALIFIED PERSON TRAINING
ENTRANT, ATTENDANT & QUALIFIED PERSON TRAINING COURSE OVERVIEW Introduction and Purpose Defining a Confined Space Locations and Types of Confined Spaces Primary and Secondary Hazards Responsibilities The
Field Instruction. The purpose of this instruction is to inform all Horizon Power workers of the safety requirements when working from a EWP.
2.7 Safety Requirements When Working from an EWP Purpose The purpose of this instruction is to inform all Horizon Power workers of the safety requirements when working from a EWP. Scope The scope of this
SOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS
SOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS Review Quiz: General jobsite safety The following questions and true or false statements help ensure that you understand the material presented in this module.
SPECIAL OPERATIONS COMMAND (SOC) SUPPORT LADDER COMPANIES
FIRE TACTICS AND PROCEDURES November 3, 2003 SPECIAL OPERATIONS COMMAND (SOC) SUPPORT LADDER COMPANIES 1. INTRODUCTION 1.1 Special Operations Command (SOC) Support Ladder Companies have been formed to
Total s Golden rules
Total s Golden rules Golden rule No. 9: Excavation works Excavation works The many risks we regularly face in our activities include those related to excavation works. It s wrong to think that only people
ARKANSAS TECH UNIVERSITY FACILITIES MANAGEMENT HEALTH AND SAFETY MANUAL (LOCKOUT/TAGOUT) 30.0
() 30.0 The purpose of the Energy Control Policy (Lockout/Tagout) is to ensure that before any employee performs any servicing and/or maintenance on machinery or equipment, where the unexpected energizing,
WARNING! DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!
Guardian Fall Protection Kent, WA 800-466-6385 www.guardianfall.com GENERAL SYSTEM SELECTION CRITERIA: Selection of fall protection shall be made by a Competent Person. All fall protection equipment shall
Contractor Hazard Identification and Control Guide
Exposure to Asbestos Containing Materials (ACM) Accidental disturbance or removal of ACM. Asbestos Containing Materials are to be removed outside school hours. No DET employees, students or visitors are
FALL PROTECTION PLAN INSTRUCTIONS
Sonic Drilling Ltd. FALL PROTECTION PLAN INSTRUCTIONS Each employer must ensure that a fall protection system is used when work is done at a place from which a fall of 3 m (10 ft) or more may occur, or
ARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL
FALL PROTECTION (PERSONAL FALL ARREST SYSTEMS) 15.0 The purpose of this policy is to specify procedures and training for the safety of the employees in the Facilities Management Group while working on
Working at Height - MEWPS & Ladders. Your company details Address Tel: Fax: Mobile:
Project/Contract Contractor Site Address Project Start Date Expected Duration Projected Completion Date Your company details Address Tel: Fax: Mobile: Document Author Authorised by Name Title Signature
Instructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading
Instructions for the Use of the Excel Spreadsheet There are Three tabs at the bottom of this worksheet Instructions tab is the one you are reading H&S Plan Tab The Plan Tab is the front cover pages of