Volume Booster. Volume Booster Description Supply pressure Pressure range Connection Device Page max. bar bar thread

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Volume Booster. Volume Booster Description Supply pressure Pressure range Connection Device Page max. bar bar thread"

Transcription

1 Volume ooster Supply pressure Pressure range onnection Device Page max. bar bar thread precise differential pressure also / 10 and G 3 8 R50.02 differential pressure also / 8 ¼ NPT transmission ratio 1:1 bis 1: and G 3 8 R differential pressure also G½ R03-J.05 different transmission ratio and G 3 8 R208.0 different transmission ratio, high-precision G½ and G¾ R high exhaust capacity G¾ - G1 R high flow rate G1 and G1½ R high exhaust capacity ½ NPT R high exhaust capacity G1¼ R11.10 standard high flow rate G3 R119-J.11 low pressure also for gases /1000 mbar G1 - G2 RZ-J.12 also for gases / 10 mbar G½ - G2 RGDJ-J.13 also for gases mbar G½ - G1½ RG4-J.13 high pressure transmission ratio 1:2 to 1: / 104 ½ NPT and ¾ NPT RH3-J.14 made of brass / 50 - G2 R120-J.15 made of stainless steel / 99 G1 RLE.1 made of brass / 99 G1 RLM.1 Volume ooster.01

2 Positive ias Relay / Differential Pressure Regulator R50 Signal-operated regulator designed to provide pressure which is the sum of the input pressure plus a preset bias. s an option, the relay can start with bias range -0.3 bar / -4 psi. The relay can also be used as a differential pressure regulator. compressed air or non-corrosive gases Supply pressure max. 17 bar Pilot pressure max. 10 bar, ccuracy response sensitivity: < 1 mbar ir consumption without constant bleed Relieving function relieving Relief capacity 110 l/min at 1.5 bar and 0.35 bar overpressure above setpoint Gauge on both sides of the body, screw plugs supplied Mounting position any Temperature range 0 to 90 / 32 F to 194 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Elastomer: NR/una-N Inner valve: brass and G 3 8, l/min parallel translation Dimensions Flow onnection Supply Positive Pressure Order Price rate thread recommended bias range number D mm mm mm m ³ /h* 1 l/min* 1 G bar bar bar Positive bias relay R50 supply pressure max. 17 bar, relieving, without constant bleed, transmission 1:1 D R , R50-02D 230, R50-02E 230, R50-02F 230, G R , R50-03D 230, R50-03E 230, R50-03F 230,00 R50 ooster negative bias factory-set to -0.3 bar R50-0..Y NPT connection thread R50-0..N tapped exhaust connection thread G 1 8 R50-0..X12 tamper-proof cap above spindle, total height 174 mm R50-0..T ccessories pressure Ø 50 mm, 0 * 2 bar, M * 2 mounting bracket made of steel W00-33 gas 1 control booster differential pressure adjustment + 1 bar gas 2 Example 1: constant differential pressure of 1 bar at high flow Example 2: constant differential pressure of 1 bar 58 Ø R50 W00-33 * 1 at 7 bar supply pressure and bar pressure * 2 01 = bar, 02 = bar, 04 = 0 4 bar, 10 = 0 10 bar R

3 Precision Volume ooster / Differential Pressure Regulator The volume booster amplifies the volume at a 1:1 ratio of pressure to pressure. Manual setting through an adjusting screw or handwheel generates a shift of the pressure range between pressure and pressure. This bias is possible both positive and negative by 2 bar. dry, oil-free and 25 μm filtered compressed air Supply pressure max. 10 bar Pilot pressure max. 8 bar, G 1 8 ccuracy response sensitivity: < 1 mbar ir consumption max. 3 l/min, subject to pressure, 1% of volume flow Relieving function relieving, the exhaust valve's diameter is six times greater than the regulating valve s diameter Gauge ¼ NPT on both sides of the body, screw plugs supplied Mounting position any Temperature range 0 to 70 / 32 F to 158 F, for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast Elastomer: NR/una-N 1 4 NPT, 280 l/min parallel translation Dimensions Flow onnection Pressure Order Preis rate thread range number D mm mm mm l/min* 1 NPT bar ooster / Differential Regulator P 1 max. 10 bar, relieving, K v = 0.1 m 3 /h with constant bleed, transmission ratio 1: handwheel 280 ¼ NPT , ,00 with tapped exhaust , , adjusting screw 280 ¼ NPT , , gas 1 booster control differential pressure adjustment + 1 bar ooster gas 2 Example 1: constant differential pressure of 1 bar at high flow Example 2: constant differential pressure of 1 bar pressure regulator e.g. 3 bar differential pressure adjustment, e.g. 2 bar volume booster supply: bar supply: bar : 5 bar control of volume booster G 1 8 ¼ NPT G 1 8 ¼ NPT * 1 at 7 bar supply pressure and 1.4 bar pressure

4 Precision Volume ooster with Transmission Ratio R750 The volume booster with transmission ratio amplifies the pressure at a 1:1 up to 1: ratio by a pneumatic pressure, which has no constant bleed. That pressure has the same function as a spring in a common regulator: generating counter pressure on the diaphragm. This force is compensated by the pressure on the diaphragm's bottom side. The ratio of pressure to pressure depends on the size of the operating diaphragms. compressed air or non-corrosive gases Supply pressure max. 17 bar Pilot pressure max. 10 bar at 1:1 ratio, 5 bar at 1:2, 3.3 bar at 1:3, 1.7 bar at 1:, ccuracy at supply variation of 3.5 bar: < 7 mbar 1:1, < 10 mbar at 1:2, < 21 mbar at 1:3, < 41 mbar at 1: response sensitivity: < 2 mbar 1:1, < 3 mbar at 1:2, < 17 mbar at 1:3, < 23 mbar at 1: ir consumption max. 3 l/min, subject to pressure Relieving function relieving Relief capacity 170 l/min at 1.5 bar and 0.7 bar overpressure above setpoint Gauge on both sides of the body, thread equal to regulator thread Mounting position any Temperature range 0 to 70 / 32 F to 158 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: zinc die-cast Elastomer: NR/una-N Inner valve: brass and stainless steel and G 3 8, l/min 1:1 up to 1: Dimensions K v - Flow onnection Signal Transmission Order Preis value rate thread pressure ratio number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 G max. bar : ooster with transmission ratio, supply pressure max. 17 bar, relieving, with constant bleed, pressure range 0 10 bar R :1 R750-02I 225, :2 R750-02K 290, :3 R , : R750-02M 335, G :1 R750-03I 225, :2 R750-03K 290, :3 R , : R750-03M 335,00 R750 ooster negative bias factory-set to -0,3 bar R Y NPT connection thread R N tapped exhaust connection thread R X12 ccessories pressure Ø 50 mm, 0 * 2 bar, M * 2 9,50 mounting bracket made of steel W ,00 58 Ø R750 W00-33 * 1 at 7 bar supply pressure and 1.4 bar pressure * 2 02 = bar, 04 = 0 4 bar, 0 = 0 bar, 10 = 0 10 bar, 1 = 0 1 bar R750-02I.04

5 Precision Volume ooster with High Relief apacity R03-J Pilot-operated volume booster with positive bias designed to supply pressure equal to pressure plus an adjustable preset spring constant. With very high forward and reverse flow characteristics and excellent sensitivity. If requested the system pressure can also manually be adjusted up to bar adding to the pressure. oil-free and 5 μm filtered compressed air or non-corrosive gases Supply pressure max. 1 bar Pilot pressure max. 10 bar, accordingly lower in the case of manual pre-pressure setting, G 1 8 ccuracy at supply pressure change from 2 bar to 7 bar: < mbar pressure deviation at flow rate change from 0 l/min to 20 l/min: < 20 mbar pressure deviation response sensitivity: < 2 mbar ir consumption 1.5 l/min at P1= 5 bar, 2 l/min at P1= 7 bar, 4 l/min at P1= 10 bar, < 1% of volume flow Relieving function relieving Relief capacity 700 l/min at bar and 0.35 bar overpressure above setpoint Gauge on both sides of the body, one screw plug supplied Mounting position any Temperature range 0 to 0 / 32 F to 140 F, for appropriately conditioned compressed air down to -30 / -22 F Material ody: zinc die-cast Elastomer: NR/una-N up to G½, l min parallel translation Dimensions K v - Flow onnection Positive Pressure Order Preis value rate thread bias range number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 G bar bar Volume booster R03-J * 3 without R03-02J 230, G 3 8* 3 R03-03J 230, G½ R03-04J 230,00 supply pressure max. 1 bar, with constant bleed, Positive bias booster R03-J * bar R03-02J1 25, G 3 8* 3 R03-03J1 25, G½ R03-04J1 25, * 3 0 bar R03-02J 295,00 ccessories supply pressure max. 1 bar, with constant bleed, tapped exhaust, transmission ratio 1:1 tapped exhaust, transmission ratio 1: G 3 8* 3 R03-03J 295, G½ R03-04J 295,00 pressure Ø 50 mm, 0 * 2 bar, M * 2 9,50 mounting nut made of plastic for R03-..J1 M30x15K 2,00 mounting bracket made of steel W ,00 R03-..J R03-..J1 ooster 54 Ø W00-3 R03-..J 7 pressure [bar] 5 R03-04J supply pressure 7 bar 4 G 1 8 G flow rate [l/min] R03-..J1 exhaust G 3 8 R03-..J * 1 at 7 bar supply pressure, bar pressure and 1 bar pressure drop * 2 02 = bar, 04 = 0 4 bar, 0 = 0 bar, 10 = 0 10 bar, 1 = 0 1 bar * 3 standard unit G½ reduced to smaller threads by fittings R03-02J.05

6 Precision Volume ooster with Transmission Ratio R208 The volume booster amplifies the volume at a 1:1 ratio of pressure to pressure. The pressure has no constant bleed and shows the same function as a spring in a common regulator: generating counter pressure on the diaphragm. compressed air or non-corrosive gases Supply pressure max. 17 bar Pilot pressure max. 10 bar at 1:1 ratio, 5 bar at 1:2, 3.3 bar at 1:3, 2.5 bar at 1:4, 1.7 bar at 1: Pilot ccuracy at supply pressure variation of 7 bar: < 7 mbar pressure deviation transmission error: 1% from 1:1 to 1:3 ratio, 2% at greater or inverse transmission response sensitivity: 1 mbar at 1:1, 2 mbar at 1:2, 3 mbar at 1:3 and at inverse transmission ir consumption max. 3 l/min, subject to pressure Relieving function relieving Relief capacity 310 l/min at 1.5 bar and 0.35 bar overpressure above setpoint Gauge on both sides of the body, screw plugs supplied Mounting position any Temperature range 0 to 80 / 32 F to 17 F, NR, for appropriately conditioned compr. air down to -40 / -40 F 0 to 90 / 32 F to 194 F, FKM, for appropriately conditioned compr. air down to -40 / -40 F Material ody: aluminium die-cast Elastomer: NR/una-N Inner valve: brass and zinc-plated steel and G 3 8, l/min 1:1 up to 1:, 2:1 up to 5:1 Dimensions K v - Flow onnection Pilot Transmission Order Preis value rate thread pressure ratio number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 G max. bar : Volume ooster with transmission ratio, supply pressure max. 17 bar, relieving, with constant bleed, pressure range 0 10 bar R : 1 R208-02I 315, : 2 R208-02K 345, : 3 R208-02L 345, : 4 R208-02M 435, : 5 R208-02N 435, : R208-02O 435, : 1 R208-02R 345,00 3 : 1 R208-02S 345, : 1 R208-02T 435,00 5 : 1 R208-02U 435,00 R208 ooster G 3 8 connection thread R ,00 NPT connection thread R N +10,00 non-relieving* 3 without relieving function R K +85,00 tapped exhaust* 3 connection thread R X ,00 bypass with restrictor between control chamber and, 1:1 only R X1 +75,00 negative bias* 3 preset to -0,24 bar, adjustable by 30 mbar R Y +45,00 silicone elastomer supply pressure max. 5 bar, 1:1 only R ,00 FKM elastomer R V +15,00 ypass valve (optional) upper diaphragm lower diaphragm ccessories pressure Ø 50 mm, 0 * 2 bar, M * 2 10,50 mounting bracket made of steel W ,00 regulating valve 58 Ø R208 W00-34 * 1 at 7 bar supply pressure and 1.4 bar pressure * 3 only for 1:1, 1:2, 1:3, 2:1 and 3:1 * 2 02 = bar, 04 = 0 4 bar, 0 = 0 bar, 10 = 0 10 bar, 1 = 0 1 bar R208-02I.0

7 Precision Volume ooster with High Flow R450 The volume booster amplifies the volume at a 1:1 ratio of pressure to pressure. The pressure has no constant bleed and shows the same function as a spring in a common regulator: generating counter pressure on the diaphragm. This force is compensated by the pressure on the diaphragm's bottom side. The ratio of pressure to pressure depends on the size of the operating diaphragms. compressed air or non-corrosive gases Supply pressure max. 17 bar Pilot pressure max. 10 bar at 1:1, 2:1 and 3:1 ratio, 5 bar at 1:2, 3.3 bar at 1:3, ccuracy at supply pressure variation of 7 bar: < 7 mbar pressure deviation response sensitivity: 2.5 mbar Internal air consumption max. 3 l/min, depending on pressure Relieving function relieving Relief capacity 1100 l/min at 0.35 bar overpressure above setpoint Gauge on both sides of the body, screw plugs supplied Mounting position any Temperature range 0 to 90 / 32 F to 194 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast Elastomer: NR/una-N, optionally FKM Inner valve: brass and aluminium l/min 1:1 up to 1:3, 2:1 and 3:1 Dimensions K v - Flow onnection Pilot Transmission Order Preis value rate thread pressure ratio number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 G max. bar : Volume ooster with transmission ratio, supply pressure max. 17 bar relieving, with constant bleed, pressure range 0 10 bar R G½ 10 1 : 1 R450-04I 790, : 2 R450-04K 845, : 3 R450-04L 845, : 1 R450-04M 845, : 1 R450-04N 845, G¾ 10 1 : 1 R450-0I 790, : 2 R450-0K 845, : 3 R450-0L 845, : 1 R450-0M 845, : 1 R450-0N 845,00 R450 NPT connection thread R N +10,00 tapped exhaust G½ connection thread, total height 148 mm R X ,00 bypass with restrictor from control chamber to, 1:1 only R X1 +45,00 external feedback with connection thread G 1 8 R X ,00 FKM elastomer R V +155,00 ccessories pressure Ø 3 mm, 0 * 2 bar, M302-..* 2 10,50 mounting bracket made of steel W ,00 3,00 ypass valve (optional) diaphragm poppet valve control diaphragm exhaust valve connecting tube aspirator tube ooster Ø5.5 Ø5.5 supply valve motor diaphragm Ø9 W00-47 G 1 2 tapped exhaust G 1 8 external feedback R450 * 1 at 7 bar supply pressure and 1.4 bar pressure * 2 02 = bar, 04 = 0 4 bar, 0 = 0 bar, 10 = 0 10 bar, 1 = 0 1 bar R450- X12X27 R450-04I.07

8 Precision Volume ooster with High Exhaust R490 The volume booster amplifies the volume at a 1:1 ratio of pressure to pressure. The booster is a rugged precision instrument with key features providing reliable, efficient and stable operation. Very low deadband between the operation of the supply valve and exhaust valve providing provides excellent pressure control. High capacity exhaust valve provides efficient dynamic reverse flow characteristics. Pressure balanced supply valve prevents changes in control characteristics when supply pressure changes. Damped diaphragm control chamber provides stable operation and protects valves from damaging oscillation under high flow conditions. compressed air or non-corrosive gases Supply pressure max. 17 bar Pilot pressure max. 10 bar; ccuracy at supply pressure variation of 7 bar: < 7 mbar pressure deviation response sensitivity: 2.5 mbar ir consumption max. 3 l/min subject to pressure Relieving function relieving Relief capacity 2800 l/min at 0.35 bar overpressure above setpoint of 1.5 bar Gauge ¼ NPT on both sides of the body, screw plugs supplied Mounting position any Temperature range -40 to 93 / -40 F to 199 F Material ody: aluminium die-castdiaphragm: NR/una-N on Polyester, optionally FKM Inner valve: zinc-plated steel, optionally stainless steel l/min Dimensions K v - Flow onnection Supply Pressure Order Preis value rate thread pressure range number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 G max. bar : Volume booster transmission ratio 1:1, supply pressure max. 17 bar, relieving, with constant bleed R G¾ R , G R ,00 NPT connection thread R N +10,00 external feedback with connection thread R X ,00 FKM elastomere R V +245,00 inner parts SST all R S +170,00 R490 ccessories pressure Ø 3 mm, 0 * 2 bar, M302-..* 2 10,50 ooster Transducer ontroller Load Output 1 Supply Molten Metal Mold Volume booster with single acting positioner and diaphragm actuator Volume booster: casting implements exhaust G 3 4 / G1 external feedback optionally P1 R490 R490 * 1 at 7 bar supply pressure and 1.4 bar pressure * 2 02 = bar, 04 = 0 4 bar, 0 = 0 bar, 10 = 0 10 bar R

9 Precision Volume ooster with High Volume Flow R200 / R201 The volume booster amplifies the volume at a 1:1 ratio of pressure to pressure. The pressure has no constant bleed. The bias spring at booster R200 generates a positive shift of the pressure range between pressure and pressure. ooster R201 with great relief capacity is a combination of two R200 boosters. When the output pressure increases above the pressure, the diaphragm assembly moves upward to close the supply valve and open the exhaust valve. Excess output pressure exhausts through the exhaust until it reaches the setpoint. compressed air or non-corrosive gases Supply pressure max. 17 bar Pilot pressure max. 10 bar, at R200; ¼ NPT at R201 ccuracy at supply pressure variation of 7 bar: < 20 mbar pressure deviation Response sensitivity 30 mbar ir consumption without constant bleed Relieving function relieving, optionally non-relieving Relief capacity 1800 l/min at 0.3 bar overpressure above setpoint at R200, l/min at R201 Gauge on both sides of the body at R200; ¼ NPT at R201 Mounting position any Temperature range 0 to 90 / 32 F to 194 F, for appropriately conditioned compressed air down to -40 / -40 F Material ody: aluminium die-cast O-rings: PTFE Diaphragm: NR/una-N Inner valve: stainless steel, cadmium-plated steel and brass G1 and G1½, 1½ NPT l/min Dimensions K v - Flow onnection Supply Pressure Order Preis Value rate thread pressure range number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 G max. bar bar ooster with high flow rate R200 supply pressure max. 17 bar, relieving, without constant bleed, transmission ratio 1: G R200-08I 1.810, G1½ R200-12I 1.810,00 ooster with high exhaust rate supply pressure max. 17 bar, relieving, without constant bleed, transmission ratio 1:1 R ½ NPT R201-12I 4.00,00 NPT connection thread for R200 R IN non-relieving without relieving function for R200 R IK tapped exhaust connection thread G 3 8 for R200 R IX12 FKM elastomer for R200 R IV R200 ccessories pressure Ø 3 mm, 0 * 2 bar, M302-..* 2 adapter ¼ NPT male / female for R201 VP-0202N mounting bracket made of steel for R200 W00-41 ooster bias spring R201 R Ø7 19 W NPT 1 4 NPT R201 * 1 at 10 bar supply pressure and 2.8 bar pressure * 2 02 = bar, 04 = 0 4 bar, 0 = 0 bar, 10 = 0 10 bar, 1 = 0 1 bar R200-08I.09

10 Precision Volume ooster with High Relief apacity R11 Pilot-operated regulator adapted for control by small remote regulator or by proional pressure valve. Ideal for continuous high-capacity requirements where reduced pressure must be held constant over wide variations in flow. The booster is equipped with a diaphragm. Transmission ratio 1:1 ( pressure to pressure). compressed air or non-corrosive gases Mounting position any Supply pressure max. 28 bar Pilot pressure max. 18 bar Outlet pressure bar ir consumption without constant bleed Relieving function 500 l/min at bar, see diagram Response sensitivity 20 mbar Ports / : see chart exhaust: G½ (up to overall size G½), G¾ (from size G¾ on) P2: P1: G 1 8 (from size G¾ on) Temperature range -18 to 70 / 0 F to 158 F Material ody: zinc die-cast Inner valve: brass Elastomer: NR/una-N ottom screw: reinforced nylon G 1 4 up to G l/min Dimensions Nominal K v - Flow onnection Order Preis size value rate thread number D mm mm mm DN (m ³ /h) m ³ /h* 1 l/min* 1 G ooster with high relief capacity R11 P1: max. 28 bar, ratio 1:1 P2: 0, bar, relieving R , G 3 8 R , G½ R , G¾ R , G1 R , G1¼ R ,00 R11-04 accessory: NPT connection thread R11-.. N +10,00 flange connection see chapter SST devices / flanges R11-.. F s.kap.15 ooster ccessories pressure Ø 50 mm, 0 * 2 bar, for to G½ M5002-* 2 9,50 Ø 3 mm, 0 * 2 bar, for G¾ to G1¼ M302-* 2 10,50 mounting bracket made of aluminium W ,00 G¾ exhaust R11-08 accessory: ,0 Ø, W00-32 G 1 8 P1 R11 P2 booster booster pressure regulator proional pressure regulator example: booster with pressure regulator example: booster with proional pressure * 1 at 8 bar supply pressure, bar pressure and 1 bar pressure drop * 2 02 = 0 2,5 bar, 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar, 25 = 0 25 bar R

11 Precision Volume ooster with High Volume Flow up to G3 R119-J Pilot-operated regulator adapted for control by small remote regulator or by proional pressure valve. Ideal for continuous high-capacity requirements where reduced pressure must be held constant over wide variations in flow. ooster with diaphragm up to regulator size G1½, with piston from regulator size G2 on. The booster is silicone-free. compressed air or non-corrosive gases Supply pressure max. 21 bar Pilot pressure max. 18 bar Pilot G 1 8 at regulator size and G 3 8, from regulator size G½ on ir consumption approx. 1 l/min of Relieving function relieving as standard, optionally non-relieving Gauge on both sides of the body Mounting position any Temperature range 0 to 50 / 32 F to 122 F up to 80 / 17 F at G3 Material ody: zinc die-cast, aluminium at G3 Inner valve: brass Diaphragm: NR/una-N, optionally FKM ottom screw: reinforced nylon G 1 4 up to G l/min Dimensions Nominal K v - Flow onnection Order Preis size value rate thread number mm mm mm DN (m ³ /h) m ³ /h* 1 l/min* 1 G Volumenstrombooster Eingangsdruck max. 21 bar, usgangsdruck 0,2 18 bar mit Eigenluftverbrauch, Übersetzung 1:1, rücksteuerbar R119-J R119-02J 172, G 3 8 R119-03J 172, G½ R119-04J 192, G¾ R119-0J 279, G1 R119-08J 279, G1¼ R119-10J 4, G1½ R119-12J 4, G2 R119-1J 1.004, G2½ R119-20J 1.004, G3 R119-24J 2.247,00 R119-10J, accessory: NPT connection thread R JN +10,00 non-relieving without relieving function R JK + 2,50 FKM elastomer for to G1½ R JX4 +140,00 for G3 R119-24JX4 +50,00 without constant bleed insided the chamber for to G1½ R JX71 +20,00 flange connection see chapter for SST devices / flanges R JF s.kap.15 external feedback for increased accuracy for G3 R119-24JX27 +70,00 pre-pressure regulation 340 mbar, advisable if P1 is close to P2 for G3 R119-24JX0 +45,00 ccessories pressure Ø 50 mm, 0 * 2 bar, for to G½ M5002-* 2 9,50 Ø 3 mm, 0 * 2 bar, for G¾ to G3 M302-* 2 10,50 mounting bracket made of steel for and G 3 8 W ,50 for G½ W ,50 for G¾ to G1½ W ,00 R119-1J, accessory: R119-24J, accessory: ooster W00-22 W00-23 W00-24 G 1 8 ( from size G 1 2 on) R119-02J../-12J R119-1J/-20J * 1 at 8 bar supply pressure, bar pressure and 1 bar pressure drop * 2 02 = bar, 04 = 0 4 bar, 10 = 0 10 bar, 1 = 0 1 bar, 20 = 0 20 bar, 25 = 0 25 bar R119-24J R119-02J.11

12 Low Pressure Volume ooster up to 1000 bar, Supply Pressure max. 20 bar RZ-J 0 Supply pressure Highly sensitive diaphragm low pressure volume booster with excellent regulating characteristics. compressed air or non-corrosive gases max. 20 bar depending on the accuracy: the smaller P 1 the higher the accuracy max. 10 bar at pressure range < 150 mbar ccuracy at max. flow rate < e.g. 10% pressure deviation of full scale ir consumption without constant bleed djustment manual by turning the spindle under the cover of the spring cage Relieving function non-relieving Gauge not available Mounting position any Temperature range -20 bis 0 / -4 F to 140 F Material ody: SG cast iron GGG50, GGG40 at G2 Elastomer: NR/una-N, optionally FKM Spring cage: aluminium Inner valve: brass and stainless steel G1 up to G / mbar Dimensions ccuracy Nominal Flow P 1 onnection Pressure Order Preis size rate max. thread range number D mm mm mm % DN l/min* 1 bar* 2 G mbar Low pressure volume booster supply max. 20 bar, non-relieving, 1:1 transmission ratio RZ-J G RZ1-08J 590, RZ3-08J 720, G1½* RZ1-12J 770, RZ3-12J 900, G RZ1-1JF 1.920, RZ2-1JF 1.920,00 RZ1-08J ooster relieving with relieving function RZ.-...R + 5% FKM elastomer RZ.-...V +2,00 flange connection see chapter for SST devices / flanges (not for RZ.-1J) RZ.-... F. s.kap.15 nitrogen N 2 : 07 carbon dioxide O 2 : 03 argon r: RZ % helium He: 09 hydrogen H 2 : 11 methane H 4 : RZ % oxygen O 2 : 15 propane 3 H : 1 nitrous oxide N 2 O: RZ % RZ1-1JF RZ.-08/12J RZ.-1JF with flange * 1 at 4 bar supply pressure and max. pressure * 2 see description above * 3 G1 thread at RZ1-08J.12

13 Low Pressure Volume ooster up to 350 mbar RGDJ-J / RG4-J Highly sensitive low pressure volume booster with diaphragm and a 1:1 transmission ratio. Zero shut-off prevents the pressure from increasing when there is no flow circulating. compressed air or non-corrosive gases Supply pressure max. 400 mbar at RGDJ-J, max. 4 bar at RG4-J Pilot pressure max. 100 mbar at RGDJ-J, max. 350 mbar at RG4-J, ir consumption without constant bleed Relieving function non-relieving ccuracy at maximum volume flow: < 20% pressure deviation of full scale Gauge not available, optionally on one side of the body from regulator size G¾ on Mounting position any Temperature range RGDJ-J: -20 to 70 / -4 F to 158 F RG4J: -15 to 0 / -4 F to 140 F Material ody: aluminium Inner valve: aluminium and plastic Elastomer: NR/una-N G½ up to G / 350 mbar Dimensions Nominal Kv- Flow onnection Pressure Order Preis size Value rate thread range number D mm mm mm DN (m 3 /h) m 3 /h* 1 l/min* 1 G mbar Low pressure booster RGDJ-J supply pressure max. 400 mbar, non-relieving, without constant bleed, transmission ratio 1: G½ 2 55 RGDJ-04J 228, G¾ 5 10 RGDJ-0J 255, G RGDJ-08J 284, G1½ 5 10 RGDJ-12J 447, G RGDJ-1J 582,00 Low pressure booster supply pressure max. 4 bar, non-relieving, without constant bleed, transmission ratio 1:1 RG4-J G½ RG4-04J 830, G RG4-08J 935, G1½ RG4-12J 1.140,00 RGDJ-04J connection thread for pressure not for RGDJ-04J RG M +40,00 ccessories preassure Ø 3 mm, 0 * 2 mbar, for G¾ up to G2 M302-..* 2 72,00 ooster ΔP pressure difference *3 mbar 300 flow dependence on supply and pressure RGDJ RG4-12JM accessory: RGDJ-J l flow rate l/min ΔP pressure difference *3 flow dependence on supply and pressure mbar RG4-J * 1 at 350 mbar supply pressure and 100 mbar pressure * 2 = 0 0 mbar, 2 = 0 10 mbar, 4 = mbar RG flow rate l/min * 3 ΔP= P 1 - P 2 Pressure difference between supply and pressure RG4-J RGDJ-04J.13

14 High Pressure Volume ooster with Transmission Ratio, up to 310 bar RH3-J Highly reliable high pressure volume booster with diaphragm and high flow. In addition, the booster features high sensitivity and excellent regulating characteristics. compressed air, non-corrosive gases or liquids Supply pressure max. 20 bar, optionally 345 bar or 310 bar Test pressure 150% of maximum supply pressure according to regulations NSI / SME 31.3 Pilot pressure see chart, G 1 8 Leakage rate < 1x 10-4 mbar l/s He ir consumption without constant bleed Relieving function non-relieving Gauge not available, optionally ¼ NPT at and Mounting postition any Temperature range -25 to 100 / -13 F to 212 F Material ody: brass, optionally stainless steel Elastomer: FKM Inner valve: PTFE, brass or optionally stainless steel 1 2 NPT, 1:2 up to 1:19 P 1 : max. 20 / 310 bar Dimensions K v - Flow Signal Pressure Transmission Order Preis value rate pressure range ratio number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 max. bar bar s ignal : High pressure booster supply pressure max. 20 bar, non-relieving, ½ NPT without constant bleed, without RH3-J : 2 RH3-J , : 4 RH3-J , : 8 RH3-J , : 13 RH3-J , : 19 RH3-J ,00 ooster ¾ NPT connection thread RH3-J.. +45,00 stainless steel 310 bar body made of stainless steel 31 RH3-J...S1 +00,00 ¼ NPT for and RH3-J...M +95,00 brass for brass body, on the input side HM +output side RH3-J...MGM+74,00 stainless steel for stainless steel body, on the input side H + output side RH3-J...MG +130,00 RH3-J ccessories set of brackets for panel mounting ,00 G 1 8 ¼-20 UN 1129 IN OUT RH3-J panel cut-out connection, option M * 1 at 210 bar supply pressure and 40 bar pressure RH3-J402.14

15 Volumenstrombooster aus Messing, bis 50 bar R120-J Solid volume booster made of brass or bronze throughout with a 1:1 transmission ratio. R120-02J2 to R120-08J2 are diaphragm-operated, R120-12J, R120-1J and R120-..J5 are piston-operated. compressed air, non-corrosive gases or liquids Supply pressure max. 50 bar, for liquids Δpmax. = 25 bar Pilot pressure max. 15 bar for R120-..J2, max. 50 bar for R120-..J5, ir consumption without constant bleed Relieving function non-relieving, optionally relieving Relief size DN2 Gauge on both sides of the body, one screw plug supplied Mounting position any Temperature range 0 to 80 / 32 F to 17 F for FKM or EPDM 0 to 130 / 32 F to 2 F for high temperature version, for appropriately conditioned compressed air down to -20 / -4 F, optionally low temperature version down to -40 / -40 F Material ody: brass up to G½, bronze from G¾ on O-rings: FKM, optionally EPDM Diaphragm: NR/una-N with PTFE coating Inner valve: brass up to G / 50 bar Dimensions Regul. system K v Flow onnection Signal Pressure Order Price D: diaphragm value rate thread pressure range number mm mm mm P: piston (m ³ /h) m ³ /h* 1 l/min* 1 G max. bar bar ooster aus Messing Eingangsdruck max. 50 bar, nicht rücksteuerbar, ohne Eigenluftverbrauch, Übersetzung 1:1 R120-J M R120-02J2 225, K R120-02J5 280, M G½ R120-04J2 225, K R120-04J5 280, M G¾ R120-0J2 520, K R120-0J5 725, M G R120-08J2 520, K R120-08J5 725, K G1½ R120-12J , K G R120-1J ,00 R120-02J2, accessory relieving diaphragm for R120-02J2 to R120-08J2 R J.R + 5% relieving piston for R120-12J, R120-1J and R120-..J5 R J.R +20% up to -40 / - 40 F low temperature version R J.X51 +30% up to 130 / 2 F high temperature version R J.X54 +30% EPDM elastomer not for G2 R J.E +10% tapped exhaust R J.RX12+20% nitrogen N 2 : 07 carbon dioxide O 2 : 03 argon r: R J % helium He: 09 hydrogen H 2 : 11 methane H 4 : R J % oxygen O 2 : 15 propane 3 H : 1 nitrous oxide N 2 O: R J % water H 2 O: R J.W +15% ccessories pressure Ø 50 mm, 0 * 2 bar, for and G½ M * 2 9,50 pressure Ø 3 mm, 0 * 2 bar, for G¾ up to G2 M302-..* 2 10,50 mounting bracket made of steel for G¾ and G1 W ,00 for G1½ and G2 W ,00 R120-04J2, accessory ooster R120-08J2, accessory W00-42 W00-43 : with piston R120-02/04J R120-0/08/12/1J * 1 at 8 bar supply pressure, bar pressure and 1 bar pressure drop * 2 02 = bar, 0 = 0 bar, 10 = 0 10 bar, 1 = 0 1 bar, 0 = 0 0 bar : with diaphragm R120-02J2.15

16 High Pressure ooster up to 100 bar RLM / RLE The pressure regulator / booster regulates the pressure through a pressure at ratio of 1:1. Functioning as a pressure regulator the pressure may either be internally inducted from the pressure or externally. The dome chamber is closed by a needle valve. Functioning as a volume booster the dome is controlled by a proional pressure regulator or a pressure regulator. compressed air, non-corrosive gases or liquids Supply pressure max. 25 bar for RL.-0.J1, max. 100 bar for RL.-0.J2, max. 40 bar for oxygen, max. 1.5 bar for acetylene Pilot pressure max. 24 bar for RL.-0.J1, max. 99 bar for RL.-0.J2, ccuracy at supply pressure variation of 10 bar: 0.1 bar pressure deviation at temperature variation of 3 / K: 1% pressure deviation at internal pressure ir consumption without constant bleed Relieving function non-relieving Gauge not available Mounting position any, dome preferably mounted up Temperature range -20 to 100 / -4 F to 212 F for FKM, -40 to 130 / -40 F to 2 F for EPDM Material ody: brass or stainless steel Inner valve: brass or stainless steel Elastomer: FKM, optionally EPDM G1, / 99 bar brass or stainless steel Dimensions K v - Flow onnection Supply Pressure Order Price value rate thread pressure range number D mm mm mm (m ³ /h) m ³ /h* 1 l/min* 1 G max. bar* 2 bar rass pressure regulator supply pressure max. 25 / 100 bar, non-relieving without constant bleed, transmission ration 1:1, FKM RLM G RLM-08J1 730, G RLM-08J2 730,00 RLM, made of brass SST pressure regulator supply pressure max. 25 / 100 bar, non-relieving without constant bleed, transmission ration 1:1, FKM RLE G RLE-08J , G RLE-08J ,00 ooster EPDM elastomer RL. -0.J.E +80,00 nitrogen N 2 : 07 carbon dioxide O 2 : 03 argon r: RL. -0.J % helium He: 09 hydrogen H 2 : 11 oxygen O 2 : RL. -0.J % propane 3 H : 1 nitrous oxide N 2 O: RL. -0.J % RLE, made of stainless steel G 1 8 RL. * 1 RL.-J1: at 25 bar supply pressure and 5 bar pressure * 2 supply pressure max. 40 bar for oxygen * 1 RL.-J2: at 85 bar supply pressure and 70 bar pressure supply pressure max. 1.5 bar for acetylene* 1 RLM-08J1.1

FILTER REGULATOR. We produce with artistic attitude.

FILTER REGULATOR. We produce with artistic attitude. FILTER REGULTOR We produce with artistic attitude. DURY from Germany is expert in fluid control; the products are mainly for control and measurement of various gases, liquid pressure and flow, including

More information

Description Pressure range Connection thread Device Page bar

Description Pressure range Connection thread Device Page bar Pressure Regulator Pressure range onnection thread Device Page bar factory-set pressure artridge regulator 2 / 3 / 4 / 6 artridge 233.02 without exhaust 7 x 25 2 / 3 / /0 G¼ia R3.03 for liquids 34 x 52

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves. Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing

More information

Product Overview A DIVISION OF MARSH BELLOFRAM

Product Overview A DIVISION OF MARSH BELLOFRAM Product Overview P627 & P630 P627 Available with internal relief device - R627 version P627 & P630 - High Flow Regulators The P627 and P630 are spring loaded, direct-operated regulators for both low and

More information

PRO-50 Instrument Supply Regulator

PRO-50 Instrument Supply Regulator Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits

More information

Precision pressure regulators LRP/LRPS

Precision pressure regulators LRP/LRPS Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement

More information

Model 1800 PFM Series Regulator. Technical Bulletin

Model 1800 PFM Series Regulator. Technical Bulletin Model 0 PFM Series Regulator Technical Bulletin Model 0 PFM Series Regulator 0 Elster American Meter The 0 PFM Series regulators are designed to control natural gas, air, nitrogen, carbon dioxide, propane

More information

Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity

Mounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

Gas Pressure Regulator HON 300

Gas Pressure Regulator HON 300 Product information serving the gas industry worldwide Applications, characteristics, technical data Applications direct acting gas pressure regulator, for systems in accordance with DVGW working instruction

More information

Maximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications

Maximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range

More information

ALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data

ALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data ir line equipment Miniature eneral Purpose egulators 7, (non-repairable) 7 Full flow gauge ports Snap action knob locks pressure setting when pushed in Standard relieving models allow reduction of outlet

More information

Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators

Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators Types 1098-EGR and 1098H-EGR Pressure Reducing Regulators January 2016 Differential as low as 1 psi / 70 mbar Materials of Construction Compatible with Below Grade Installations Quick Change Trim Package

More information

TECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13

TECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13 Page 1 of 13 1. Description The Viking 2 Model G-2000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler

More information

Ratio Regulator Zero Governor. FRG/6 Series

Ratio Regulator Zero Governor. FRG/6 Series Ratio Regulator Zero Governor FRG/6 Series CSA Certified ANSI Z21.18 / CSA 6.3 CSA Requirement # 5.01 Zero Governor and Gas/Air Regulator File # 157406 US and Canadian Models FRG 705/6 FRG 707/6 FRG 710/6

More information

Pressure reducing valves Index

Pressure reducing valves Index Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel

More information

Precision Pressure Regulators. Precision Fluidics

Precision Pressure Regulators. Precision Fluidics Precision Pressure Regulators Precision Fluidics This is increased efficiency. Precision low flow carrier gas control for gas chromatography. Parker precision regulators, valves and controllers are designed

More information

Models 461-S, 461-8S and S Regulators. R-1330 Rev. 7

Models 461-S, 461-8S and S Regulators. R-1330 Rev. 7 Models 461-S, 461-8S and 461-12S Regulators R-1330 Rev. 7 461-S, 461-8S and 461-12S Regulators The Sensus Models 461-S, 461-8S and 461-12S are balanced valve, spring type regulators designed for distribution

More information

1200 Series Pressure Regulators

1200 Series Pressure Regulators SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of

More information

Differential pressure controller (PN 16) AHP - return mounting, adjustable setting

Differential pressure controller (PN 16) AHP - return mounting, adjustable setting Data sheet Differential pressure controller (PN 16) AHP - return mounting, adjustable setting Description DN 15-40 DN 50 DN 65-100 AHP is a self-acting differential pressure controller primarily for use

More information

Thermal Energy Flowmeter Model KEC. Application Range. Special Features

Thermal Energy Flowmeter Model KEC. Application Range. Special Features Thermal Energy Flowmeter for gases measuring monitoring analysing KEC O O Direct mass flow rate measurement of gases OMeasuring O accuracy: ± 0.3% of full scale ±1.5% of reading on request: ± 0.3% of full

More information

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note

More information

Model 4000 Pressure Controller

Model 4000 Pressure Controller FEATURES Multiple Configurations The 4000 series pressure controller can be configured into either proportional only or proportional plus reset mode with a minimum of parts. Rugged Design Die cast aluminum

More information

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,

More information

Type 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls

Type 1098-EGR. Pilot-Operated Valve Link Regulators. Features. Fisher Controls Type 1098-EGR and Type 1098H-EGR VL1000 FIELDVUE Pilot-Operated Valve Link Regulators Fisher Controls January 1982 Bulletin The Type 1098-EGR and Type 1098H-EGR regulators (figure 1) provide economical

More information

Pressure regulators for a wide range of applications

Pressure regulators for a wide range of applications Pressure regulators Pressure regulators for a wide range of applications Pressure regulators are used to reduce a gas from a higher input pressure (p1) to a lower output pressure (p2). They are used everywhere

More information

Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm

Relief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm s s RS Differential NB 9.5mm RVA In-line Differential NB 6 to 19mm RV Direct Acting NB up to 9mm LPR Low Pressure Differential NB 8mm We design, machine, build and test all our products on one site in

More information

C 10 Pressure Reducing Valve

C 10 Pressure Reducing Valve C 10 Pressure Reducing Valve C 10 Direct Acting Pressure Reducing Valve The C10 balanced pressure reducing valve range is designed for use on water/air (gas) applications and for installations which have

More information

Product Overview A DIVISION OF MARSH BELLOFRAM

Product Overview A DIVISION OF MARSH BELLOFRAM Product Overview P627 & P630 P627 P627 & P630 - High Flow Regulators The P627 and P630 are spring loaded, direct-operated regulators for both low and high pressure applications in the oil and gas industries.

More information

Liquid level regulating valves Types PMFL / PMFH and SV

Liquid level regulating valves Types PMFL / PMFH and SV Data sheet Liquid level regulating valves Types / PMFH and SV For modulating liquid level control in refrigeration, freezing and air conditioning plant, a system comprising a liquid level regulating valve

More information

New Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A

New Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A Air Consumption 70% Down New Product Precision Regulator Air Saving Type RPE Series PRECISION REGULATOR RPE SERIES Large Air Saving CC-1072A Air Consumption 70% Down. New Type Eco-friendly Precision Regulator

More information

Pressure regulator for water

Pressure regulator for water Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water

More information

PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES

PRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES PRESSURE REGULATORS ALL MEDICAL GASES In this section we propose our pressure regulators (FM series, MU and MERCURY ) and our Rs flowmeters for applications other than oxygen therapy (presented in the

More information

RB 4700 Commercial & Industrial Regulator

RB 4700 Commercial & Industrial Regulator RB 4700 Commercial & Industrial Regulator The RB 4700 regulator is designed for use in industrial and distribution applications such as district station and heating plants, and for industrial customers.

More information

Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases

Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Glass tube flowmeters Series 2000 Variable area flowmeter for low flows of liquids and gases Short mounting length and compact construction, especially indicated for control panels Easy installation. No

More information

High Precision Gauge Pressure Indicators

High Precision Gauge Pressure Indicators Series 1500 8½" Dial High Precision Gauge Pressure Indicators Series 1500 Gauges have capsule-type pressure elements up to and including the 150-psig range. Ranges of 200 psig and above have Bourdon tubes.

More information

Pressure Regulator 133 / 233

Pressure Regulator 133 / 233 Benefits Accurate regulation Exchangeable component technique Easy maintenance Suitable for HTB requirements DVGW-approval (DIN 3380/81, VP 200). Description The 133/233 regulator is a direct-acting, spring

More information

Safety Shut-Off Valve HON 720

Safety Shut-Off Valve HON 720 Safety Shut-Off Valve HON 70 Product information serving the gas industry worldwide Application, Characteristics, Technical Data Application main safety device for gas pressure regulating stations suitable

More information

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2 Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).

More information

Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN

Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN Data sheet Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN 40-100 Description AB-PM is ideal for staged installation and commissioning AB-PM is a combined

More information

MANUAL KPS Pressure Control Valve

MANUAL KPS Pressure Control Valve TetraTec Instruments GmbH Gewerbestrasse 8 71144 Steinenbronn Deutschland E-Mail: info@tetratec.de Tel.: 07157/5387-0 Fax: 07157/5387-10 MANUAL Pressure Control Valve *** VERSION 1.0 *** Update: 17.11.2006

More information

SUPER PRECISION AIR RELAYS

SUPER PRECISION AIR RELAYS CAT. No. KS-128E SUPER PRECISION AIR REGULATOR rsseries SUPER PRECISION AIR REGULATORS rrseries SUPER PRECISION AIR RELAYS Air Pressure Regulators that attain the ultimate in pressure control. SUPER PRECISION

More information

2/2-way proportional valve

2/2-way proportional valve 2/2-way proportional valve General purpose 0... 12 bar DN 0.8... 2.0 mm 1/8 or sub-base version Type 2824 can be combined with Type 805 Digital control electronics DIN-rail version Type 07 Cable plug Typ

More information

safety Shut-Off Valve HON 721

safety Shut-Off Valve HON 721 safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety

More information

Tapped exhaust port. Sturdy, simple, reliable design. Easy to add on Feedback. High gain pilot valve. Simple calibration, external zero adjustment

Tapped exhaust port. Sturdy, simple, reliable design. Easy to add on Feedback. High gain pilot valve. Simple calibration, external zero adjustment Electropneumatic Positioner Sturdy, simple, reliable design High gain pilot valve Built in gauge ports Tapped exhaust port Easy to add on Feedback Unit F5 Simple calibration, external zero adjustment Bright

More information

ACTUATORS AND INSTRUMENTS

ACTUATORS AND INSTRUMENTS ACTUATORS AND 03 ADVANCED ACTUATORS AND FOR A COMPLETE VALVE CONTROL SOLUTION Koso Kent Introl LIMITED (KKI) supplies a full range of advanced actuators and associated instrumentation to complement its

More information

PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT

PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT Model Number Model Description Page # Pilot operated Relief Valves Pilot Operated Relief Valves 3-27 Operation

More information

Mounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type

Mounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating

More information

Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ

Compact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face

More information

Mass Flow Controller (MFC) for Gases

Mass Flow Controller (MFC) for Gases Mass Flow Controller (MFC) for Gases Bypass MFC with capillary technology for nominal flow rates from 5 ml N /min to 15 l N /min Applicable for aggressive gases Compact design and digital communication

More information

INSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator

INSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As

More information

TA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics

TA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics TA-FUSION-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P TA-FUSION-P These innovative

More information

CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES

CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES P0170E-1.DOCX/08.16/MG CENTRAL GAS SUPPLY SYSTEMS : CYLINDER BATTERIES AND HIGH PRESSURE HOSES With a Central Gas Supply System, individual work places or gas take-off stations are supplied with gas through

More information

Gas Pressure Regulator HON 200

Gas Pressure Regulator HON 200 Product information serving the gas industry worldwide Applications, characteristics, technical data Application Gas supply to municipal, industrial and individual consumers Regulator for low-load rails

More information

R84G - Excelon Plus Modular System Pressure regulators

R84G - Excelon Plus Modular System Pressure regulators > Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as

More information

REGULATORS FOR SPECIFIC APPLICATIONS

REGULATORS FOR SPECIFIC APPLICATIONS SINGLE-STAGE REGULATORS FOR NITROUS OXIDE AND CARBON DIOXIDE (MODELS SG9011, SG9012, SG9014) Nitrous Oxide and Carbon Dioxide frequently cause ordinary regulators to freeze up. Models SG9011, SG9012 and

More information

RC 195 Receiver-Controller

RC 195 Receiver-Controller Document No. 129-082 RC 195 Receiver-Controller Product Description The POWERS RC 195 Receiver-Controller is a pneumatic instrument that receives one, two or three pneumatic inputs. It produces a pneumatic

More information

Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve

Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve Self-operated Pressure Regulators Type 2405 Pressure Reducing Valve ANSI version Application Pressure reducing valve for set points from 0.075 to 150 psi (5 mbar to 10 bar) Valve size NPS ½ to 2 1) (DN

More information

Seated valves VRB 3, VRG 3

Seated valves VRB 3, VRG 3 Data sheet Seated valves VRB 3, VRG 3 Description VRB, VRG valves provide a quality, cost effective solution for most water and chilled applications. These valves may be used with glycol concentrations

More information

STAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves

STAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance

More information

Types ACE95 and ACE95Sr Tank Blanketing Valves

Types ACE95 and ACE95Sr Tank Blanketing Valves Types ACE95 and ACE95Sr Tank Blanketing Valves Bulletin 74.1:ACE95 May 2010 W9133 W8155 Figure 1. Type ACE95 Tank Blanketing Valve Figure 2. Type ACE95Sr Tank Blanketing Valve Features Fully Balanced Pilot

More information

Model 2851 CONSTANT FLOW REGULATOR

Model 2851 CONSTANT FLOW REGULATOR CONSTANT FLOW REGULATOR Model 2851 The model 2851 constant flow regulator is designed to provide constant flow of liquids or gases regardless of pressure variations. It is intended for low liquid flows

More information

Bourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1

Bourdon tube pressure gauges with glycerine filling, for chemical applications EN 837-1 Application For aggressive gaseous and liquid media which are not highly viscous and do not crystallize. Suitable for use in corrosive atmospheres. For measurement in areas subject to high vibration levels

More information

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for Excavators Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

More information

Type ACE95jr Tank Blanketing Valve

Type ACE95jr Tank Blanketing Valve Type ACE95jr Tank Blanketing Valve Features Fully Balanced Plug Design Reduces Inlet Pressure Sensitivity Bulletin 74.1:ACE95JR May 2010 Stainless Steel Construction Available High Sensitivity Self-Contained

More information

Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction

Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction Product Manual CVS Type 1301F and CVS Type 1301G Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS

More information

SSL. Smart Valve Positioner.

SSL. Smart Valve Positioner. Smart Valve Positioner Smartest valve control device meeting a dynamic performance and a precise setting with a piezoelectric technology and an optimized auto-calibration program Features Auto-Calibration

More information

776 Cryogenic Safety Valve

776 Cryogenic Safety Valve 776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant

More information

Air service units series K G1/8, G1/4

Air service units series K G1/8, G1/4 Air service units series K Series FK Filter 12.011 Series RK Pressure regulator 12.012 Series FRK Filter/regulator 12.013 Series OK Lubricator 12.014 Series FROK Two piece air service unit 12.015 Series

More information

Becker Precision Equipment

Becker Precision Equipment Becker Precision Equipment VRP-B-CH Series Valve Regulation Pilot VRP-B-CH Valve Regulator Pilot Provides Low-Bleed Pressure Control When Combined with Double-Acting Pneumatic Control Valve Actuators Description

More information

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20

More information

PNEUMATIC PRESSURE CONTROLLERS

PNEUMATIC PRESSURE CONTROLLERS PNEUMATIC PRESSURE CONTROLLERS VARIABLE VOLUME PRESSURE CONTROLLER MODELS: V-1 R AND V-2R The 3D Variable Volume Pressure Controller is available for requirements of 0-1,000 psi and 0-6,000 psi in absolute

More information

Precision Regulator. Series Model Regulating pressure range Port size Page

Precision Regulator. Series Model Regulating pressure range Port size Page Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.

More information

AIR DRIVEN. Gas Boosters & SYSTEMS. Accepting VISA, MasterCard and American Express

AIR DRIVEN. Gas Boosters & SYSTEMS. Accepting VISA, MasterCard and American Express AIR DRIVEN Gas Boosters & SYSTEMS Accepting VISA, MasterCard and American Express Gas Boosters AIR DRIVEN FROM 30 PSI TO 21,750 PSI MAXIMATOR Maximator gas boosters are an excellent alternative to high

More information

High precision pressure regulators G1/4" R210 / R220 / R230 Series

High precision pressure regulators G1/4 R210 / R220 / R230 Series R210 - R230 High precision pressure regulators G1/4" High Precision Pressure Regulators R210 / R220 / R230 Series FLUIDTECHNIK BOHEMIA s. r. o. Olomoucká 87 tel : 548 213 233-235 CZ-627 00 Brno fax : 548

More information

Pilot HON 630a, HON 640

Pilot HON 630a, HON 640 product information serving the gas industry worldwide pplication, characteristics, technical data pplication pilot for gas pressure regulators HON 0, HON 0, HON 0, HON 0 suitable for natural gas and all

More information

299H Series Pressure Reducing Regulators

299H Series Pressure Reducing Regulators September 12 299H Series Pressure Reducing Regulators Inlet Pressure up to psig / 1 bar Compact ±1% Accuracy for Fixed Factor Billing (PFM) Rugged Construction Integral Pilot Easy to Maintain W713 Figure

More information

CALEFFI. Ball zone valves. series /03 GB

CALEFFI. Ball zone valves. series /03 GB all zone valves series cert. n ISO / Function Zone valves are used to automatically shut-off the flow of carrier fluid distributed to a system. Specifically: -In central heating systems, they support the

More information

MODEL 273PL GAS PRESSURE REGULATOR

MODEL 273PL GAS PRESSURE REGULATOR Edition GD273PL.06.USA BRYAN DONKIN RMG USA Serving the Gas Industry WORLDWIDE Applications Primarily utilized for commercial, industrial and multi-installation applications For natural gas and all non-corrosive

More information

SERIES 30. Spring Operated Tank Blanketing Valve PROTECTOSEAL.

SERIES 30. Spring Operated Tank Blanketing Valve PROTECTOSEAL. SERIES 30 PROTECTOSEAL 1 2" NPT inlet and outlet standard Direct acting valve mechanism Optional flanged or threaded inlet and outlet connections available Inlet gas pressures from 10 PSIG to 200 PSIG

More information

SB AXIAL FLOW VALVES

SB AXIAL FLOW VALVES SB9509.3 AXIAL FLOW VALVES The improved technology for pressure regulation The American Axial Flow Valve provides pressure and flow control in high capacity pipelines. It can be used for pressure regulation,

More information

Types ACE95 and ACE95Sr Tank Blanketing Valves

Types ACE95 and ACE95Sr Tank Blanketing Valves October 2014 Types ACE95 and ACE95Sr Tank Blanketing Valves W9133 W8155 Figure 1. Type ACE95 Tank Blanketing Valve Figure 2. Type ACE95Sr Tank Blanketing Valve Features Fully Balanced Pilot Design Reduces

More information

Anderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions

Anderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent

More information

Filter pressure regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with pressure gauge suitable for ATEX

Filter pressure regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with pressure gauge suitable for ATEX Filter regulator, Series AS3-FRE G 3/8 - G 1/2 filter porosity: 5 µm lockable for padlocks with gauge suitable for ATEX 1 00119372 Version Parts Mounting orientation Working min./max. Medium Medium temperature

More information

The Ins and Outs of I/P Transducers

The Ins and Outs of I/P Transducers The Ins and Outs of I/P Transducers By Mark B. Levine, ControlAir Inc. General description I/P transducers are versatile instruments that use an electrical control signal to proportionally regulate gas

More information

RB 4000 Commercial & Industrial Regulator

RB 4000 Commercial & Industrial Regulator R 4000 ommercial & Industrial Regulator The R 4000 pressure regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants and all installations where accurate

More information

756 Safety Relief Valves

756 Safety Relief Valves 756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both

More information

Safety shut-off valve Control Control Lock-up Over pressure set point Under pressure set point pressure range accuracy class

Safety shut-off valve Control Control Lock-up Over pressure set point Under pressure set point pressure range accuracy class MR HP20 Gas pressure regulator Inlet pressure 20 bar Nominal diameter DN 25, DN 50, DN 80, DN 100 Applications Pressure reduction for: - District distribution - Industrial uses Brief information The gas

More information

Pressure gauge with plastic case

Pressure gauge with plastic case Pressure gauge with plastic case Designed to monitor pressure in systems not subjected to vibrations. Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper

More information

STAD-C. Balancing valves DN 15-50

STAD-C. Balancing valves DN 15-50 STAD-C Balancing valves 15-50 IMI TA / Balancing valves / STAD-C STAD-C The STAD-C balancing valve has been specially developed for use in indirect cooling systems but performs just as effectively in refrigerated

More information

66 Series Direct-Operated Regulators and Vacuum Service Equipment

66 Series Direct-Operated Regulators and Vacuum Service Equipment 66 Series Direct-Operated Regulators and Vacuum Service Equipment November W193/IL Figure 1. Exterior of Type 66 or 66Z Regulator Introduction Fisher 66 Series direct-operated pressure-reducing regulators

More information

BERMAD Waterworks. Level Control Valve with Bi-Level Vertical Float. 700 Series Model B. Features and Benefits. Major Additional Features

BERMAD Waterworks. Level Control Valve with Bi-Level Vertical Float. 700 Series Model B. Features and Benefits. Major Additional Features Level ontrol Valve with i-level Vertical Float Reservoir filling Very low supply-pressure Low noise generation Energy cost-critical systems Systems with poor water quality Reservoir outlet Distribution

More information

1/2 to 2-1/2 NPT; 0 to 230 PSI Advantages / Benefits

1/2 to 2-1/2 NPT; 0 to 230 PSI Advantages / Benefits /-Way Angle-Seat Valve Type 000 to - NPT; 0 to 30 Advantages / Benefits Spring return closed or open, double-acting Materials: bronze, stainless steel High flow rate Self-adjusting packing glands with

More information

Fisher 2625 and 2625NS Volume Boosters

Fisher 2625 and 2625NS Volume Boosters Product Bulletin D200071X012 2625 and 2625NS Volume Boosters Fisher 2625 and 2625NS Volume Boosters A Fisher 2625 or 2625NS volume booster (figure 1) is used in conjunction with a positioner on a throttling

More information

IFP C175-* REMOTE CONTROL RELIEF VALVE

IFP C175-* REMOTE CONTROL RELIEF VALVE IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)

More information

Pressure Regulators. Aperflux 851

Pressure Regulators. Aperflux 851 Pressure Regulators Aperflux 851 80 1 2 3 4 5 6 7 Aperflux 851 > Pressure regulators Introduction Aperflux 851 is a boot style pilot-controlled pressure regulator for medium and high pressure applications.

More information

STAD. Balancing valves DN (MD60, MD61, MD62)

STAD. Balancing valves DN (MD60, MD61, MD62) STAD Balancing valves DN 15-50 (MD60, MD61, MD62) IMI TA / Balancing valves / STAD STAD The STAD balancing valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited

More information

POP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS

POP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety

More information

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS 0/05 OPERATING INSTRUCTIONS for gas pressure regulators PN0 with integrated slam shut valve (SSV) and integrated limited capacity safety relief valve (RV) MR 25 F0, MR 25 SF0 p e 20 kpa - 0 MPa (0,2-0

More information