Pressure Reducing Valves Catalog Quick Reference

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Pressure Reducing Valves Catalog Quick Reference"

Transcription

1

2 Quick Reference Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page 2 CP20-2 SDC0- Pressure Reducing, 20 bar PR - 5 PRC 06 NCS06/ Non-Relieving, Direct Acting [000 psi] 5 bar [4500 psi] PR - 6 Symbol Model No. Description Flow* Pressure Page 2 CP20- SDC0- Pressure Reducing, 20 bar PR - 7 Relieving, Direct Acting [000 psi] Quick Reference Pressure Reducing, Relieving Model No. Description Flow* Pressure Page PRR0-PVG SDC0- Pressure Reducing, 20 bar PR - 8 Relieving, Direct Acting, Designed for PVG Actuators [000 psi] Pressure Reducing, Non-Relieving Model No. Description Flow* Pressure Page CP20-4 PPRC 06 SDC0- NCS06/ Pressure Reducing, Non-Relieving, Pilot Operated 50 bar PR - 9 [5000 psi] 5 bar PR - 0 [4500 psi] Pressure Reducing, Relieving Model No. Description Flow* Pressure Page PRMP 064 CP2- SDC0- CP2-S Pressure Reducing, Relieving, Pilot Operated 5 l/min [0 US gal/min] 5 bar PR - [4500 psi] 50 bar PR - 2 [5000 psi] Pressure Reducing, Relieving Model No. Description Flow* Pressure Page 4 2 PRR0-DRD SDC0-4 Pressure Reducing, Relieving, Direct Acting with Damping Port 8 l/min 207 bar [000 psi] PR - * Flow ratings are based on a pressure drop of 7 bar [00 psi] unless otherwise noted. They are for comparison purposes only. PR - 2

3 Application Notes PRESSURE REDUCING VALVES Pressure reducing valves are pressure limiting devices that limit pressure in one portion of a circuit while leaving system pressure unaffected. They are available in direct-acting and pilot-operated types and as pressure reducing/relieving valves or as pressure reducing valves only. Pressure reducing valves DIRECT ACTING PRESSURE REDUCING / RELIEVING VALVES Direct-acting pressure reducing/relieving valves allow flow to pass from 2 to until the pressure at reaches the predetermined setting, at which point the spool shifts to restrict input flow from 2 (reducing mode) or to open flow from to (relieving mode) as needed to maintain the regulated pressure at. Applications Notes Advantages of direct-acting pressure reducing valves are: Direct acting pressure reducing valve Fast response Economical 2 A typical application for direct-acting pressure reducing valves is for pressure control in systems requiring two or more different pressure settings. These valves are best suited for low flow applications such as hydraulic brake or motor shift. PR -

4 Application Notes PILOT-OPERATED PRESSURE REDUCING / RELIEVING VALVES Pilot-operated pressure reducing/relieving valves operate similarly to direct-acting pressure reducing/relieving valves -- the spool allows flow to pass from 2 to until the pressure at reaches the predetermined setting and forces the pilot poppet off it s seat. This creates a pressure differential across the spool that causes the spool to shift and maintain regulated pressure at in the same manner as the direct-acting pressure reducing/relieving valve. Advantages of pilot-operated relief valves are: Pilot-operated pressure reducing valve Smooth, stable response High pressure capability Precise pressure control with varying flow rates 2 Applications Notes A typical application for pilot-operated pressure reducing valves is for pressure control in systems requiring two or more different pressure settings where high pressure capability and/or extremely precise pressure control is required. PR - 4

5 Pressure Reducing, Non-Relieving, Direct Acting CP20-2 This is a direct-acting pressure-reducing (non-relieving) valve. 2 psi bar 54 SUS ( cst) hyd. 00 F (8 C),740 20,450 00, Pressure Rated flow at 7 bar [00 psi] 20 bar [000 psi] 0.25 kg [0.56 lb] SDC0- Regulated 2 Press Tank 46.4 [.8] 0 L/min US gal/min 7/8-4 UNF THD 55.9 [2.20] Flow h.00 in t 4-47 N. m [0-5 lbf. ft] Type A Type F 80.0 [.5] max. Type E Type K CP20-2 CP20-2-B-6S-A-C - 00 Seal kit B = Buna-N V = Viton Housing P/N 0 = No Housing No Housing SEB = Al,/8 BSP SDC0--SE-B SE4B = Al,/2 BSP SDC0--SE-4B 6S = Al, #6 SAE CP0--6S 8S = Al, #8 SAE CP0--8S Other housings available Adjustment option A = Internal E = External F = Tamper resistant K = Knob Crack pressure Code x 0 = psi Example: 00 = 000 psi Pressure range bar [psi] A = 4-28 [50-400] Std. setting 7 [250] B = 5-55 [75-800] Std. setting 28 [400] C = 7-97 [00-400] Std. setting 69 [000] D = 4-66 [ ] Std. setting 0 [500] PR - 5

6 Pressure Reducing, Non-Relieving, Direct Acting PRC 06 This is a direct-acting pressure reducing (non-relieving) valve. 2 Reduced pressure psi bar PRC l/min US gal/min Rated Flow 5 bar [4500 psi] 0.4 kg [0. lb] NCS06/ I PRC 06 - EN V Type of Seal kit E = Internal screw V =Viton EN = External screw B = Buna-N M = Handwheel Housing P/N 00 = No Housing No Housing Setting range SE/8 = AL, /8 BSP NCS06/-SE-/8.5 = -0 bar [ psi] SE/2 = AL, /2 BSP NCS06/-SE-/2 = 0-25 bar [45-6 psi] SE6S = AL, #6 SAE NCS06/-SE-6S 2 = bar [6-60 psi] SE8S = AL, #8 SAE NCS06/-SE-8S Other housings available To order this valve with a specific factory setting,contact your Sauer-Danfoss representative PR - 6

7 Pressure Reducing, Relieving, Direct Acting CP20- This is a direct-acting pressure reducing/ relieving valve. 2 psi 2,0,740 bar SUS ( cst) hyd. 00 F (8 C) regulated press to tank (relieving) regulated press (reducing) Regulated 2 Press Tank 46.4 [.8],450, Pressure L/min 40 US gal/min 0.6 7/8-4 UNF THD 55.9 [2.20] Flow h.00 in t 4-47 N. m [0-5 lbf. ft] Type A Type F Rated flow at 7 bar [00 psi] 80.0 [.5] max. 20 bar [000 psi] 0.2 kg [0.5 lb] SDC0- Type E Type K CP20- CP20 --B-6S-A-C - 00 Seal kit B = Buna-N V = Viton 2057 Housing P/N 0 = No Housing No Housing SEB = Al,/8 BSP SDC0--SE-B SE4B = Al,½ BSP SDC0--SE-4B 6S = Al, #6 SAE CP0--6S 8S = Al, #8 SAE CP0--8S Other housings available Adjustment option A = Internal E = External F = Tamper resistant K = Knob Pressure setting Code x 0psi (0.69 bar) Example: 00 = 000 psi (70 bar) Pressure range bar [psi] A = 4-28 [50-400] Std. setting 7 [250] B = 5-55 [75-800] Std. setting 28 [400] C = 7-97 [00-400] Std. setting 69 [000] D = 4-66 [ ] Std. setting 0 [500] PR - 7

8 Pressure Reducing, Relieving, Direct Acting, Designed for PVG Actuators PRR0-PVG This is a direct-acting pressure reducing/ relieving valve, designed for PVG actuators. s Max. pressure in port 2 Maximum flow Cartridge 20 bar [000 psi] 5 l/min [. US gal/min] 0.2 kg [0.5 lb] SDC0- Pressure Comparison from ports 2- at l/min Reduced Pressure from ports 2- PRR0-PVG E H B PR - 8

9 Pressure Reducing, Non-Relieving, Pilot Operated CP20-4 This is a pilot-operated pressurereducing (non-relieving) valve. psi bar 54 SUS ( cst) hyd. 00 F (8 C) 2,0 40,740 20,450 00, Pressure Rated flow at 7 bar [00 psi] 50 bar [5000 psi] 0.20 kg [0.4 lb] SDC0- Regulated 0 L/min Flow US gal/min /8-4 UNF THD.00 in 64-7 Nm [47-54 lbf*ft] Type A Type F CP Pressure Tank 46.2 [.82] 4.7 [.64] CP20-4-B-6S-A-C - 50 Seal kit B = Buna-N V = Viton Housing P/N 0 = No Housing No Housing SEB = Al,/8 BSP SDC0--SE-B SE4B = Al,/2 BSP SDC0--SE-4B 6S = Al, #6 SAE CP0--6S 8S = Al, #8 SAE CP0--8S Other housings available Adjustment option A = Internal E = External F = Tamper resistant K = Knob Pressure setting Code x 0psi (0.69 bar) Example: 50 = 500 psi (05 bar) Pressure range bar [psi] A = 4-55 [ ] Standard 28 [400] B = 2-0 [00-500] Standard 69 [000] C = [ ] Standard 0 [500] D = [ ] Standard 0 [500] PR - 9

10 Pressure Reducing, Non-Relieving, Pilot Operated PPRC 06 This is a pilot-operated pressure reducing (non-relieving) valve. psi bar 54 SUS ( cst) hyd. 00 F (8 C) PPRC Pressure L/min US gal/min Flow Rated flow at 7 bar [00 psi] 5 bar [4500 psi] 0.4 kg [0. lb] NCS06/ PPRC 06 - EN V Type of Seal kit E = Internal screw V =Viton EN = External screw Omit = Buna-N M = Handwheel Housing P/N 00 = No Housing No Housing Setting range SE/8 = AL, /8 BSP NCS06/-SE-/8 = 0-70 bar [45-05 psi] SE/2 = AL, /2 BSP NCS06/-SE-/2 2 = 0-40 bar [45-20 psi] SE6S = AL, #6 SAE NCS06/-SE-6S = bar [ psi] SE8S = AL, #8 SAE NCS06/-SE-8S Other housings available To order this valve with a specific factory setting,contact your Sauer-Danfoss representative PR - 0

11 Pressure Reducing, Relieving, Pilot Operated PRMP 064 This is a pilot-operated pressure reducing/relieving valve. psi 400 bar SUS ( cst) hyd. 00 F (8 C) Dump Reduced pressure Pressure L/min Flow US gal/min Rated Flow 5 bar [4500 psi] 0.2 kg [0.46 lb] SDC0- PRMP 064 PRMP EN - - SE/8 -V Adjustment E = Internal screw EN = External screw M = Handwheel V =Viton Omit = Buna-N Seal Kit Housing P/N Setting range 00 = No Housing No Housing SEB = Al, /8 BSP SDC0--SE-B = 0-70 bar [45-05 psi] SE4B = Al, /2 BSP SDC0--SE-4B 2 = 0-40 bar [45-20 psi] 6S = Al, #6 SAE CP0--6S = bar [ psi] 8S = Al, #8 SAE CP0--8S Other housings available To order this valve with a specific factory setting,contact your Sauer-Danfoss representative PR -

12 Pressure Reducing, Relieving, Pilot Operated CP2- This is a pilot-operated pressure reducing/relieving valve. CP2- psi bar Pressure L/min US gal/min 2 regulated press regulated press to tank (relieving) (reducing) Flow Rated flow at 7 bar [00 psi] 50 bar [5000 psi] 5 l/min [0 US gal/min] 0.27 kg [0.60 lb] CP2-S CP2--B-0S-A-A-050 Adjustment options A = Internal F =Tamper Resistant E = External K = Knob Seal kit B = Buna-N 205 V = Viton 206 Pressure setting Code x 0psi (0.69 bar) Pressure range Example: 050 = 500 psi (4 bar) A = 4-55 bar [ psi] B = 2-0 bar [ psi] C = bar [ psi] D = bar [ psi] Housing P/N 0 = No Housing No Housing 4B = Al, /2 BSP CP2-S-4B/2B 6B = Al, /4 BSP CP2-S-6B/2B 0S = Al, #0 SAE CP2-S-0S/4S 2S = Al, #2 SAE CP2-S-2S/4S Other housings available PR - 2

13 Pressure Reducing, Relieving, Direct Acting with Damping Port PRR0-DRD This is a direct-acting pressure reducing/ relieving valve, with damping port. 4 2 cst[54 SUS] C[00 F] psi 740 bar 20 Relieving Reducing l/min Rated Flow at 7 bar [00 psi] 05 bar [522 psi] 8 l/min 0.29 kg [0.64 lb] SDC0-4 7/8-4 UNF USgal/min in Nm [0-5 lbf-ft] Type A Adjustment.00 in. Type E PRR0-DRD 2 4 Type F Adjustment Type K 62.5 [2.45] 55.7 [2.8] 80 [.5] max. PRR0-DRD-4-E-04-B-00 Pressure Range = 4-27 bar [ psi] Standard Setting 2 bar [00 psi] 2 = 5-55 bar [ psi] Standard Setting 5 bar [500 psi] = 7-96 bar [ psi] Standard Setting 69 bar [000 psi] 4 = 5-65 bar [ psi] Standard Setting 04 bar [500 psi] Adjustment Type A = Internal E = External F = Tamper Resistant K = Knob 00 = No Housing B = Al, /8 BSP 4B = Al, /2 BSP 6S = Al, #6 SAE 8S = Al, #8 SAE Seal Kit B = Buna-N 2002 V = Viton Pressure Setting 04 = 04 bar [500 psi] XXX = Standard Setting Housing Part # No Housing CP0-4-B CP0-4-4B CP0-4-6S CP0-4-8S P08 70E PR -

14 Notes Notes PR - 4

Cartridge Valves Technical Information. Pilot operated check valves. Quick reference

Cartridge Valves Technical Information. Pilot operated check valves. Quick reference Quick reference Pilot to Open Model No. Description Flow* Pressure Page P RPC 4 NCS4/ Pilot Operated Check Valve, Pilot to Open l/min [ US gal/min] RPC 6 NCS6/ 5 l/min [7 US gal/min] CP45- SDC- l/min RPC

More information

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08 Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size

More information

Motion Controls Valve locator

Motion Controls Valve locator Motion Controls Valve locator unctional Symbol C C Model Cavity low Rating Typical Pressure Page OCV standard L/min (USgpm) bar (psi) CE A9 (5) 7 (4) - CE A66 (8) 7 (4) - CEH A66 (8) 5 (5) - CE9 A6 9 ()

More information

PTS1120TSJB PTS2120TSTSJB

PTS1120TSJB PTS2120TSTSJB Engineering & Manufacturing Solutions Specifications: 18 gpm (68.0 lpm) Nominal Capacity. Rated up to 3000 psi (207 bar). Port Sizes: -Inlet/Outlet #12 SAE. -Work Ports #10 SAE. 10 Micron Filtration Recommended.

More information

Directional Controls

Directional Controls Vickers Directional Controls Directional Control Valves DG3V-3-*-60 Hydraulic Operated DG17V-3-*-60 Lever Operated DG18V-3-*-60 Air Operated DG20V-3-*-60 Cam Operated DG21V-3-*-60 Plunger Operated CETOP

More information

directional control valve series cv691

directional control valve series cv691 directional control valve series cv691 Contents Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 9 Page 10 Page 11-12 General Information Technical Data Performance Curves Dimensions Relief Valve Advantages

More information

Full Range Pressure Compensating Variable Flow Control

Full Range Pressure Compensating Variable Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever

More information

Sandwich Valves. 1 Change in flow, temperature or fluid (SSU) rating will affect valve

Sandwich Valves. 1 Change in flow, temperature or fluid (SSU) rating will affect valve Technical Information Series PRM General Description Series PRM reducing valves are used to regulate pressure, in one area of a circuit, below normal system pressure. This style valve is well suited to

More information

Electrically Operated Pressure-Relief Cartridge, Size 10

Electrically Operated Pressure-Relief Cartridge, Size 10 Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges

More information

Pressure reducing valve, pilot operated, Model 3DR

Pressure reducing valve, pilot operated, Model 3DR RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features

More information

F05MSV-N* CONTINENTAL HYDRAULICS FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK

F05MSV-N* CONTINENTAL HYDRAULICS FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK CONTINENTAL HYDRAULICS F05MSV-N* FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400

More information

IFP C175-* REMOTE CONTROL RELIEF VALVE

IFP C175-* REMOTE CONTROL RELIEF VALVE IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)

More information

MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB

MDC Series. Marine Grade 4-Way Directional Control Valve With Or Without Flow Control MDCF16TH304H MDC16TH404HB Engineering & Manufacturing Solutions Specifications: MDC rated for -4 gpm (-151 lpm) MDCF rated for -3 gpm (-114 lpm) Rate for 3 PSI (27 bar) Port Sizes #16 SAE (1-5/16-12) all ports Weighs 16 lbs. (7.3

More information

Proportional Throttle Cartridges, Size 16

Proportional Throttle Cartridges, Size 16 Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact

More information

Vickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94

Vickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94 Vickers Flow Controls Flow Controls FN, F(C)G, FRG Released 6/94 685 Table of Contents FN03/06/10 Model Series Application Data...............................................................................

More information

Series 1, 3 and 4 Cv = /8" and 1/4" Ported Manually Operated Valves. 3-way/2-position, 5-way/2-position, 5-way/3position

Series 1, 3 and 4 Cv = /8 and 1/4 Ported Manually Operated Valves. 3-way/2-position, 5-way/2-position, 5-way/3position Cv =.52 -.73 Series, 3 and 4 Cv =.52.3 /8" and /4" Ported Manually Operated Valves 3-way/2-position, 5-way/2-position and 5-way/3-position Ports /8 and /4" NPTF The Series (/8 & /4", 3-way/2-position and

More information

Contents. Catalog HY /US Load and Motor Control Valves SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI

Contents. Catalog HY /US Load and Motor Control Valves SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI Load and Motor Control Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD PILOT ASSISTED CB101... C10-3... Load Control Cartridge Valve...45/12... 380/5500... 5-6 MHC-010-S***

More information

* Different spooltypes up to 120 l/min. in combination with simultaneously control.

* Different spooltypes up to 120 l/min. in combination with simultaneously control. APV-16 Features. * Modular assembly system, suitable for 'Build Program'. * Max. operating pressure 420 bar. * Different spooltypes up to 120 l/min. in combination with simultaneously control. * Compact

More information

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 10 DP Nominal size 10 Series 4X Maximum reduced pressure 210 bar (3050 PSI) Maximum flow 80 L/min

More information

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for Excavators Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

More information

OMS, OMT and OMV Orbital Motors. Technical Information

OMS, OMT and OMV Orbital Motors. Technical Information , OMT and OMV Orbital Motors Technical Information , OMT and OMV A Wide Range of Orbital Motors Revision History Table of Revisions Date Page Changed Rev ED Dimensions changed EF A Wide Range of Orbital

More information

OMS, OMT and OMV Orbital Motors. Technical Information

OMS, OMT and OMV Orbital Motors. Technical Information OMS, OMT and OMV Orbital Motors Technical Information OMS, OMT and OMV A Wide Range of Orbital Motors F300540.eps F300030.TIF A wide range of orbital motors Sauer-Danfoss is a world leader within production

More information

SPC*01 (2-way) SPC03/06 (2-way) Size NG6 NG10 NG16 NG25 DIN A10 ISO 4401 NFPA D05 CETOP 5 P, A, B:

SPC*01 (2-way) SPC03/06 (2-way) Size NG6 NG10 NG16 NG25 DIN A10 ISO 4401 NFPA D05 CETOP 5 P, A, B: Catalog HY14-255/US Technical Information General Description sandwich type pressure s are typically used in combination with proportional directional control valves. The keeps the pressure drop over the

More information

Service and Parts Manual Proportional Valves PVG 100 powersolutions.danfoss.com

Service and Parts Manual Proportional Valves PVG 100 powersolutions.danfoss.com MAKING MODERN LIVING POSSIBLE Service and Parts Manual Proportional Valves PVG 100 powersolutions.danfoss.com Contents Function PVG 100 sectional drawing...3 Installation Installation and plug orientation...4

More information

SystemStak Valves. ISO4401 Size 02

SystemStak Valves. ISO4401 Size 02 SystemStak Valves ISO441 Size 2 Reduce System Space Requirements SystemStak valves make compact hydraulic systems in which specific function valves are sandwich mounted between a directional valve and

More information

E SERIES. Specification. E Series. Relief and Flow Control Valves O M O M EIC-H Model No. Description

E SERIES. Specification. E Series. Relief and Flow Control Valves O M O M EIC-H Model No. Description 4 Ω-1 Ω Series Proportional Electro-ydraulic This relief and flow control valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since this valve controls

More information

SC HYDRAULIC ENGINEERING CORPORATION

SC HYDRAULIC ENGINEERING CORPORATION Designers and Manufacturers of Hydraulic and Pneumatic Equipment SC HYDRAULIC ENGINEERING CORPORATION 1130 Columbia Street - Brea, California 92821 - USA Phone (714) 257-4800 - Fax (714) 257-4810 V FLOW

More information

SDM to 8 sections monoblock valve D1WWDA02A

SDM to 8 sections monoblock valve D1WWDA02A SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information

More information

OMS Technical Information Technical data

OMS Technical Information Technical data Technical data TECHNICAL DATA FOR OMS Type OMS OMS OMS OMS OMS OMS OMS OMS OMS OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSW OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS OMSS Motor size 80 100 125 160 200 250

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

SERVICE INSTRUCTIONS P-A OR P-B ELECTRONIC PRESSURE COMPENSATOR, SERIES F1U CONTROLS

SERVICE INSTRUCTIONS P-A OR P-B ELECTRONIC PRESSURE COMPENSATOR, SERIES F1U CONTROLS Bulletin 947556 SERVICE INSTRUCTIONS P-A OR P-B ELECTRONIC PRESSURE COMPENSATOR, SERIES F1U CONTROLS OILG0390 Figure 1. Typical Oilgear Type P-A or P-B Electronic Pressure Compensator, Series F1U Controls

More information

3 & 4-Way Mixing & Diverting Valves

3 & 4-Way Mixing & Diverting Valves Applications: 3-Way Valve The ESBE VRG series of 3 & 4-way valves are designed to mix water to the appropriate temperature to meet the zone or system requirements within heating and cooling systems. The

More information

Pressure Sensing Valve - Model 4023

Pressure Sensing Valve - Model 4023 Pressure Sensing Valve - Model 4023 Overview AMOT Model 4023 can be used as a 2 or 3-way capacity, pressure sensing valve. This valve is ideal for applications that require compressor suction and discharge

More information

BUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-

BUTTERFLY VALVES. Toll Free (877) - ICFLUID  -2- BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut

More information

SERVICE INSTRUCTIONS P-C SINGLE PRESSURE - SOFT START, SERIES F1U CONTROL

SERVICE INSTRUCTIONS P-C SINGLE PRESSURE - SOFT START, SERIES F1U CONTROL Bulletin 947557 SERVICE INSTRUCTIONS P-C SINGLE PRESSURE - SOFT START, SERIES F1U CONTROL OILG0392 Figure 1. Typical Oilgear Type P-C Single Pressure - Soft Start, Series F1U Control for PVG 100/130 (F1U

More information

Digital Hydraulic Multimeters

Digital Hydraulic Multimeters For Sales & Service contact: Distributor Webtec Products Limited Webtec Products Limited Nuffield Road, St. Ives, Cambridgeshire, PE27 3LZ, UK Tel: +44(0)1480 397 400 Fax: +44(0)1480 466 555 e-mail: sales@webtec.co.uk

More information

Propor tional Re lief Valve s

Propor tional Re lief Valve s www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves

More information

R S 280 is a modular parallel sect. Directional Control Valve RS RS In relation to its flow capacity its installation

R S 280 is a modular parallel sect. Directional Control Valve RS RS In relation to its flow capacity its installation Directional Control Valve RS 280 3 RS 2802 3102RS28001 R S 280 is a modular parallel sect nal valve. Suitable applications are medium sized and big truck loaders, medium sized backhoe loaders and other

More information

Stainless steel valves for corrosive environments & water base fluids

Stainless steel valves for corrosive environments & water base fluids www.atos.com Table E135-10/E Stainless steel valves for corrosive environments & water base fluids explosion-proof soleid valves, with tex, IEEx or UL US certification and pressure relief valves LOHX(S)6-3/M-O/V

More information

Directional Control Valve P70

Directional Control Valve P70 Directional Control Valve Open or Closed Centre Proportional Valve Series Catalogue HY17-8546/UK January, 2007 Catalogue Information Catalogue layout This catalogue is designed to give an overview of the

More information

MAKING MODERN LIVING POSSIBLE. Technical Information. Orbital Motor VMP. powersolutions.danfoss.com

MAKING MODERN LIVING POSSIBLE. Technical Information. Orbital Motor VMP. powersolutions.danfoss.com MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motor VMP powersolutions.danfoss.com Revision History Table of Revisions Date Changed Rev Feb 214 New dimension drawings. Converted to Danfoss

More information

Priority (Swing) Motors Data and Specifications

Priority (Swing) Motors Data and Specifications s Data and Specifications Specifications HMF 55 HMF 75 HMF 105 cm 3/rev in 3/rev 55 3.36 75 4.57 105 6.40 Pressure Ratings Nominal 5000 PSIG Maximum 6090 PSIG Peak 7250 PSIG Operating Speed Maximum 4100

More information

Hydraulic hand test pump Models CPP700-H and CPP1000-H

Hydraulic hand test pump Models CPP700-H and CPP1000-H Calibration technology Hydraulic hand test pump Models CPP700-H and CPP1000-H WIKA data sheet CT 91.07 for further approvals see page 2 Applications Simple test pressure generation on site, in the laboratory

More information

Orbital Motors OMSW with brake nose

Orbital Motors OMSW with brake nose MAKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMSW with brake nose powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev October 214 Changed to Danfoss layout

More information

Intrinsically safe solenoid valves on/off controls - ATEX certification

Intrinsically safe solenoid valves on/off controls - ATEX certification www.atos.com Table E130-17/E Intrinsically safe solenoid valves on/off controls - ATEX certification valve body valve spool intrinsically safe solenoid electrical connector manual override DHW-0611/WP/6

More information

Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve

Flow Control Valves. 1 Description. 2 Symbols. Series MTKA, MTQA, MTCA 2.1 MTKA MTQA flow control valve. 1.1 MTKA flow control valve Flow Control Valves Series MTK, MTQ, MTC MTQ... MTC... robust, uncomplicated, reliable these valves do not require maintenance. This lowers costs and reduces the risk of a system failure. can be provided

More information

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10 / ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications

More information

Monoblock Directional Control Valve RMB 202

Monoblock Directional Control Valve RMB 202 Monoblock Directional Control Valve RMB 202 Key valve features RMB 202 is a 2-section mono block valve, especially designed for front-end loaders. The valve is prepared for quick connecting couplings,

More information

FLUID POWER FLUID POWER EQUIPMENT TUTORIAL OTHER FLUID POWER VALVES. This work covers part of outcome 2 of the Edexcel standard module:

FLUID POWER FLUID POWER EQUIPMENT TUTORIAL OTHER FLUID POWER VALVES. This work covers part of outcome 2 of the Edexcel standard module: FLUID POWER FLUID POWER EQUIPMENT TUTORIAL OTHER FLUID POWER VALVES This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed

More information

P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES

P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES 52 000/110 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by

More information

Orbital Motors Type VMP. Technical Information

Orbital Motors Type VMP. Technical Information Orbital Motors Type VMP Technical Information A Wide Range of Orbital Motors Revision View Date Page Changed Revision May 213 All First edition AA F31 245 A Wide Range of Orbital Motors Sauer-Danfoss is

More information

Pressure Dump Valve Service Kit for Series 2300 Units

Pressure Dump Valve Service Kit for Series 2300 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit

More information

Balancing Valves. Applications/ Features: Ordering Information: Accessories:

Balancing Valves. Applications/ Features: Ordering Information: Accessories: Applications/ Features: Danfoss MSV balancing valves are designed to provide terminal or circuit flow balance in hydronic heating or cooling systems. Each valve provides a high level of balancing accuracy

More information

Pilot valves for pilot operated servo valves

Pilot valves for pilot operated servo valves Data sheet Pilot valves for pilot operated servo valves The range of pilot valves consists of: Constant-pressure pilot valve, type CVP (LP) and CVP (HP) Differential-pressure pilot valve, type CVPP (LP)

More information

2-way flow control valve Model 2FRM 6

2-way flow control valve Model 2FRM 6 R 28 6/0.98 Replaces R 28 62/05.94 R 28 6/06.98 2-way flow control valve Model 2FRM 6 Nominal size 6 Series X Maximum operating pressure 4569 SI (5 bar) ) Maximum flow 8.45 GM (2 L/min) H//D 585/97 + H//D

More information

Over-center valves type LHT with oscillation damping, zero leakage

Over-center valves type LHT with oscillation damping, zero leakage Over-center valves type LHT with oscillation damping, zero leakage Flow rate Q max = 250 lpm Operation pressure p max = 450 bar See also: o Over-center valve type LHK acc. to D 7100 o Over-center valve

More information

Orbital Motors OMS, OMT and OMV

Orbital Motors OMS, OMT and OMV MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev February 216 Corrected Hardening specification

More information

Electro-Proportional Valves. Selection Guide HYDRA FORCE

Electro-Proportional Valves. Selection Guide HYDRA FORCE Continuous-duty rated solenoids. Hardened precision spool and cage for long life. Cartridges voltage interchangeable. Efficient wet-armature construction. Industry-common cavity. Designed for excellent

More information

005 Series Modular Valves

005 Series Modular Valves 5 Series Modular Valves ype of Modular Valve Class Graphic Symbols age Solenoid Operated Directional Valve DSG-5- *** - * - ressure Control Valves Flow Control Valves Directional Control Valves Modular

More information

Directional Control valves

Directional Control valves Chapter 10.1 Chapter 10 Directional Control valves 10.1 Check Valves Figure 10.1 Check valve wo conditions: free flow or "checked" flow Usually has a cracking pressure of 69 a 104 a (10-15 psi) If used

More information

[You may download this article at: https://fluidsys.org/downloads/ ]

[You may download this article at: https://fluidsys.org/downloads/ ] Fluidsys Training Centre, angalore offers an extensive range of skill-based and industry-relevant courses in the field of Pneumatics and Hydraulics. For more details, please visit the website: https://fluidsys.org

More information

Pressure relief valve, direct operated. Type DBD. Features. Contents. RE Edition: Replaces:

Pressure relief valve, direct operated. Type DBD. Features. Contents. RE Edition: Replaces: Pressure relief valve, direct operated Type DBD R 2542 dition: 21-7 Replaces: 214-8 Size 3 Component series 1X Maximum operating pressure 3bar [915 psi] Maximum flow 33 l/min [87 US gpm] H5585 Features

More information

3-Way Safety Block DSV

3-Way Safety Block DSV 3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with

More information

Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections

Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections Features General application The RP03 provides protection from both backsiphonage and backpressure

More information

1200 Series Pressure Regulators

1200 Series Pressure Regulators SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of

More information

Hydraulic Punch Drivers

Hydraulic Punch Drivers INSTRUCTION MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex 7904SB / 7906SB Quick Draw 90 Quick Draw Hydraulic Punch Drivers Serial Codes AHJ, YZ, and ZA Read and understand all of the

More information

Check valve hydraulically pilot operated

Check valve hydraulically pilot operated Check valve hydraulically pilot operated RE 6/7.5 Replaces:. / Types SV and SL Nominal sizes to Component series X Maximum operating pressure 5 bar Maximum flow 55 l/min H555 Overview of contents Contents

More information

ASB Accumulator Safety Blocks

ASB Accumulator Safety Blocks ASB Accumulator Safety Blocks For working pressures up to 350 bar Catalogue HY07-1241/UK Note: In line with our policy of continuing product improvement, specifications in this catalogue are subject to

More information

Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.

Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min. Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They

More information

D62 - D63 Directional Control Valve l/min

D62 - D63 Directional Control Valve l/min D62 - D63 Table of Contents 1 1.1 1.2 Product Description... 2 Function... 2 Properties... 2 2 Technical Data... 3 3 3.1 3.2 Ordering Information... 4 Type code... 4 Versions currently available... 4 4

More information

Lecture 19 PRESSURE-CONTROL VALVES [CONTINUED]

Lecture 19 PRESSURE-CONTROL VALVES [CONTINUED] Lecture 19 PRESSURE-CONTROL VLVES [CONTINUED] 1.5 Counterbalance Valve Schematic diagram of counterbalance valve is shown in Fig. 1.14. These normally closed valves are primarily used to maintain a back

More information

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL B HYDRAULIC HAND PUMP SINGLE STAGE

Tech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800) MODEL B HYDRAULIC HAND PUMP SINGLE STAGE Parts List for: Form No. 101804 SPX Corporation 88 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.powerteam.com Tech. Services: (800) 477-8326 Fax: (800) 76-8326 Order Entry: (800)

More information

Axial piston pumps type PVC

Axial piston pumps type PVC www.atos.com Table TA16SK-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low

More information

MESP-202H INSTALLATION INSTRUCTIONS AND OWNER S MANUAL. HF and HF FEATURES VALVE FUNCTIONS ADJUSTMENTS SCHEMATICS

MESP-202H INSTALLATION INSTRUCTIONS AND OWNER S MANUAL. HF and HF FEATURES VALVE FUNCTIONS ADJUSTMENTS SCHEMATICS MESP-202H INSTALLATION INSTRUCTIONS AND OWNER S MANUAL FEATURES VALVE FUNCTIONS ADJUSTMENTS SCHEMATICS HF42407-07 and HF51912-09 Muncie Power Products, Inc. TABLE OF CONTENTS DESCRIPTION PAGE Features...

More information

ALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data

ALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data ir line equipment Miniature eneral Purpose egulators 7, (non-repairable) 7 Full flow gauge ports Snap action knob locks pressure setting when pushed in Standard relieving models allow reduction of outlet

More information

Hydraulic Piston Accumulators

Hydraulic Piston Accumulators Hydraulic Installation All accumulators shipped from the factory will be pre-charged to a nominal pressure in order to seat the piston on the hydraulic cap. In this case the precharge will not be listed

More information

Series V48. 3-Way Pressure Actuated Modulating Valves. Product Bulletin. Features. Pressure balanced design. Free movement of all parts

Series V48. 3-Way Pressure Actuated Modulating Valves. Product Bulletin. Features. Pressure balanced design. Free movement of all parts Series V48 -Way Pressure Actuated Modulating Valves Product Bulletin These Water Valves are especially designed for condensing units cooled either by atmospheric or forced draft cooling towers. They may

More information

Digital directional & flow control valves D-DF(R)G

Digital directional & flow control valves D-DF(R)G Digital directional & flow control valves D-DF(R)G Functional Symbols Model Code D-DFG- D-DFG-~ D-DFRG-/ D-DFG--C--- Digital directional & flow control valve Size Spool type (neutral position) : ll ports

More information

IRC 2011 All Rights Reserved

IRC 2011 All Rights Reserved 1 2 3 The enthalpy of saturated vapor and the enthalpy of saturated liquid is evaluated at the fully accumulated relief device set pressure (P=P set * 1.1 + 14.7). Set Pressure (psig) h fg (Btu/lbm) 150

More information

Liquid level regulating valves Types PMFL / PMFH and SV

Liquid level regulating valves Types PMFL / PMFH and SV Data sheet Liquid level regulating valves Types / PMFH and SV For modulating liquid level control in refrigeration, freezing and air conditioning plant, a system comprising a liquid level regulating valve

More information

HPB45 Hydraulic Paving Breaker

HPB45 Hydraulic Paving Breaker INSTRUCTION MANUAL HPB45 Hydraulic Paving Breaker Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 99925427 REV 4 2005 Greenlee

More information

FLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS. This work covers part of outcome 2 of the Edexcel standard module:

FLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS. This work covers part of outcome 2 of the Edexcel standard module: FLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S Preaction 346a 1. Description The 6 Model G-6000P Electric Release Preaction System Riser Assembly can be used as a Single Interlock Preaction System with Electric Release, or as a Double Interlock Preaction

More information

Plasson Pressure Reducers & Pressure Regulators

Plasson Pressure Reducers & Pressure Regulators Plasson Pressure Reducers & Pressure Regulators New design with advanced features Pressure regulator for standard systems Pressure reducer for Water On Demand controlled systems Intelligent system - Adapts

More information

TBV-CM. Combined control & balancing valves for small terminal units For modulating control NPT threads

TBV-CM. Combined control & balancing valves for small terminal units For modulating control NPT threads TBV-CM Combined control & balancing valves for small terminal units For modulating control NPT threads IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling

More information

Valve Station ICF 15, 20 and 25

Valve Station ICF 15, 20 and 25 Installation Guide Valve Station ICF 15, 20 and 25 027R9782 Installation ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 + 027R9782 1a 1b 1c Welding TIG/MIG/SMAW Gas welding Danfoss M27L0049_1 2 3 Danfoss A/S (RC-MDP/MWA),

More information

Instructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.

Instructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position. 027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782

More information

Instruction & Parts Manual

Instruction & Parts Manual Large Capacity Spring Rewind Hose Reel Instruction & Parts Manual Model 88402 3/4 Hose Capacity Model 88402DEF 3/4 Hose Capacity Model 88403 1/2 Hose Capacity Model 88405 1 Hose Capacity P/N 88403-75L

More information

E Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21

E Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21 E Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21 Table of Contents Introduction......................................................................................................

More information

Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN

Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN Data sheet Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN 40-100 Description AB-PM is ideal for staged installation and commissioning AB-PM is a combined

More information

TECHNICAL DATA. Page 1 of 8. model f /2 (dn40) & 2 (dn50)

TECHNICAL DATA. Page 1 of 8. model f /2 (dn40) & 2 (dn50) Page 1 of 8 1. DESCRIPTION The Viking Model F-1 Deluge Valve is a quick opening, differential diaphragm, flood valve with one moving mechanism. The Deluge Valve is used to control water flow in Deluge

More information

Valves, manually operated

Valves, manually operated Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide

More information

DPC130X. ATEX version. Pre-compensated Load Sensing Sectional Valves

DPC130X. ATEX version. Pre-compensated Load Sensing Sectional Valves DPC3X ATEX version Pre-compensated Load Sensing Sectional Valves Additional information This catalogue shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed

More information

SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function

SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function SKP Series SKP25 U.. Pressure Regulating Gas Valve Actuator with Safety Shut-off Function Technical Instructions Document No. 155-752 SKP25 U.. Description Only when assembled to Series VG Gas valves SKP25

More information

STA-F Description. STA-F Prefab insulation Measuring nipples

STA-F Description. STA-F Prefab insulation Measuring nipples TA STA-F 5-5-1 5 Balancing valves September 1985 STA-F is a flanged balancing valve available in sizes DN 20-300, and has been designed with an oblique seat in order to give low resistance and large flows

More information

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2 Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).

More information

TECHNICAL DATA. Trimpac 257a. September 16, 2013

TECHNICAL DATA. Trimpac 257a. September 16, 2013 September 16, 2013 Trimpac 257a 1. DESCrIpTION DESCRIPTION The Viking Double SUREFIRE SIngle Interlock Preaction TRIMPAC Model D-2 and D-2B used with either a Model E or F Deluge Valve (A.1), a Viking

More information

Hydraulic Piston Accumulators

Hydraulic Piston Accumulators Ride Control Engineering Services PWCE Extendavator Paul Wever Construction Equipment Co., Inc. P.O. Box 85 401 Martin Drive Goodfield, IL 61742-0085 Phone (309) 965-2005 Fax (309) 965-2905 1-800-990-PWCE

More information

V46 Series 2-Way Pressure-Actuated Water-Regulating Valves With Union Fittings

V46 Series 2-Way Pressure-Actuated Water-Regulating Valves With Union Fittings Installation Instructions V46 Issue Date 11//1 V46 Series -Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V46 Series -Way Pressure-Actuated Water-Regulating

More information