Purpose Site Safety Brief Generic / Remote Areas
|
|
- Florence McCormick
- 6 years ago
- Views:
Transcription
1 Purpose Site Safety Brief Generic / Remote Areas The purpose of this site brief is to provide you as a contractor the necessary information required to conduct your work safely and in accordance with Victorian Port Corporation (Melbourne) (VPC(M)) Occupational Health and Safety, and Environment (OHSE) rules. November 2015 Responsibility of VPC(M) Under the Occupational Health and Safety (OH&S) Act and in accordance with its policies, VPC(M) has a duty of care to ensure that so far as is reasonable practicable that: risks to health, safety and the environment are minimised adequate facilities for the welfare of workers are provided and adequate training, instruction, information or supervision is provided to enable workers to undertake their work safely.
2 Responsibility of Workers and / or Contractors All users/workers have a duty of care to ensure that they implement and maintain safe systems of work. This, in part, will be facilitated by: the completion of contractor induction training knowledge of the berth s emergency procedures identification of any site hazards conduct of a Job Safety & Environment Analysis (JSEA) obtaining any necessary Permit to Work approvals take reasonable care of their health and safety take reasonable care of the health and safety of persons who may be affected by their acts or omissions cooperate with their employer with respect to any action taken to comply with OH&S legislation do not intentionally or recklessly interfere with or misuse anything provided at the workplace in the interest of health, safety or welfare immediately notify their supervisor and VPC(M) contact upon becoming aware of any incident or hazard. Workplace Considerations Prior to entering the site all personnel should be familiar with the following workplace conditions: Slips, trips and falls A number of unsealed and uneven surfaces (including roadways) exist throughout the port at remote sites. Fall into openings and pits All workers working at remote site must be aware that there may be openings and pits whose covers may be dislodged. Obstacles There are may be spare parts, disused items, plant and machinery stored on site. These present a potential traffic hazard for vehicle movement and serve as nest for wild life. Coastal Marine Areas Coastlines and water depths may vary depending on the state of tide. The wetlands and grasslands may have unpredictable surfaces, debris, flotsam as well as flora and fauna which support the ecosystem. Flora Plant life in the form of tall grass, weeds, thistle and thorny bushes are often encountered. They should be reported and work postponed till work area is cleared of them. Fauna Wild life in the form of animals (Foxes, rodents ), birds (seagulls, pelicans ), Reptiles (Snakes, lizards ) and insects (Bees, wasp, ants ) are often encountered. Exercise caution and making a noise usually disturbs the wild life. They should be reported and work postponed till work area is cleared of them. Debris and Flotsam Debris and flotsam are often washed up on the coastal areas. These present a potential tripping hazard, and serve as nest for wild life. Airborne Dust Elements of airborne dust can sometimes affect visibility and air quality within the site. This usually occurs when conducting works on windy days or when high volumes of traffic are moving through the site. Pedestrian / Vehicle Traffic 2
3 Care is to be taken when driving vehicles within a remote site and speed limits if not marked must be limited to 20km/h. All personnel are to wear high visibility vests while in the site. Contamination - Surface Contaminants (organic and inorganic compounds) may be present in the soil. Care should be taken when handling or coming into contact with ground water, soil and vegetation. Proper hygiene procedures must be followed when handling contaminated products. Contamination - Subsurface Contaminants (organic and inorganic compounds) may be present at varying depths in the soil. Care should be taken when boring and drilling into the soil. Air/gas monitoring may be required on site. Needle stick injuries Used syringes may be present and care should be taken when walking in long grass or picking up debris. Asbestos Asbestos may be present within buildings and structures. Please refer to VPC(M) s asbestos register prior for more information. Multi-user site The site may have multiple users at any given time. Advise any other personnel on site if your work is likely to impact them. Permit to Work The following activities will require a permit when at Holden Dock: hazardous port activities, including bunkering and hot work Ensure you clarify with your VPC(M) contact as to whether you will require any other permits Personal Protective Clothing The minimum personnel protective equipment requirement is as follows: Notes: A high visibility vest Safety footwear Clothing with long pants and long sleeves Extra protective equipment may be needed depending on the workplace location and task to be undertaken. A job safety analysis or safe work method statement is to be used to determine if extra protective devices are required. Other PPE examples may include: A Hard Hat where risk of objects falling on your head is present, Gloves for manual handling tasks, Safety eyewear where a spill or splash may occur, fall protection equipment when working at heights above two metres. A personal floatation device (PFD) is required to be worn when working within 2 metres of the wharf edge. Smoking Smoking is not permitted within any VPC(M) buildings or berths. Road Safety The laws outlined in the Victorian Road Safety Act 1986 apply throughout VPC(M) controlled sites. The following restrictions also apply: Drivers of vehicles, plant and equipment must comply with all road traffic signage displayed throughout the VPC(M) controlled areas Vehicles, plant and equipment must be positioned so that the roadway or the emergency accesses are not restricted or blocked 3
4 All vehicles are to park in designated parking bays as applicable Speed limit of vehicles must be restricted to walking pace within berths Do not park or drive vehicles or equipment in such a manner that kerbs, gutters, drains, building structures or vegetation are likely to be damaged Vehicles must be parked facing out (rear to curb) and with the keys left in the ignition Housekeeping All work areas are to be kept free from debris and work materials. The work site is to be cleared of all work materials at the end of each day s activities or be secured from contact by other personnel entering the site. All waste and hazardous material is to be removed from VPC(M) land and disposed of in a safe and approved manner. All items (including drums and packages) must be clearly marked and identified with MSDS. Only immediate use chemicals are to be kept on site. Amenities Many of the remote sites have no amenities. In such circumstances, workers are to provide their own amenities or identify the closest public amenities. Work Procedures When working on site, respect other people working in the area and neighbouring tenants. Noisy and / or dirty work should be carried out at a time when minimal disruption should occur. Hazard and Incident Reporting Where a hazard is identified report the hazard to your direct manager or VPC(M) contact. An incident is an event which has or, has the potential to cause injury or disease to people, damage to property or equipment, or damage to the environment. An emergency incident will cause, or threaten to cause serious injury to people, major damage to VPC(M) property, its surrounds, the environment, port business and the business of the VPC(M) including but not limited to Fire, Explosions, Dangerous Goods Spills, Oil Spills, Vehicle Collisions, Structure Collapses and Bomb Threats. In the event that an incident occurs on a VPC(M) controlled site: First Aid where an emergency response is required immediately informing emergency services (police, fire, ambulance) and Melbourne VTS where a pollution response is required immediately informing Melbourne VTS in all cases you will be responsible for contacting your VPC(M) contact There is limited access to first aids kits at various VPC(M) remote sites; there are no first aid kits on vacant land that do not infrastructure. Workers are to ensure that they have adequate first aid equipment (including pressure immobilisation bandage) and qualified first aid attendants applicable to the type of work being undertaken. Workers are recommended to have at least one mobile phone that can be used if an emergency or incident arises. Working Near the Community Understand that your works may impact the community, including nearby businesses, properties and residents. Discuss the works with the VPC(M) manager 2 weeks before the works commence and work out how you will minimise the impacts. Particularly consider: traffic and parking disruptions temporary path or road detours 4
5 noisy or dusty work activity works conducted at night, in the early morning, on Saturday afternoons or on Sundays. When approached by a member of the public, respond promptly and in a polite manner. Assist the community member with simple enquiries and provide them with a VPC(M) Community Contact Line card so they can call VPC(M) for more detail. Report community issues to your VPC(M) manager immediately. Media Protocols Refer all media enquiries to VPC(M) s Head of Corporate Relations. Do not be drawn into providing even minor comment or opinion to any media outlet. Photography of VPC(M) sites, projects and people cannot be published, used in promotions, advertising or display without written permission from VPC(M) s Head of Corporate Relations. Contact your VPC(M) Manager to arrange. Environmental Contamination (Sub-Surface Works) Due to historical land reclamation and previous industrial operations in and around the port, all shallow soils within the port area should be regarded as potentially contaminated unless demonstrated otherwise through an assessment program conducted by suitably qualified personnel. The main pathways for exposure to contamination during subsurface works include: Absorption (following direct skin contact) Ingestion (during food consumption or smoking) Inhalation (of dusts, fibres and/or vapours) Therefore, regardless of location, it is recommended that workers avoid direct skin contact with soil by wearing a long sleeved shirt and full-length trousers during works. Workers should also ensure that they wash hands prior to consuming food and/or smoking. If the activities require workers to touch soil with their hands, it is recommended that disposable gloves be worn and discarded or cleaned following use. If hydrocarbon (fuel) or other chemical vapours are encountered, personnel working in the vicinity of the trench should wear a half-face respirator with organic filters. If vapours are considered to be offensive trenching works should cease and the VPC(M) project manager should be notified immediately. There is also a possibility that asbestos fibres may be present within excavated soils. Should fibrous material be identified, excavation should cease to enable further assessment to be undertaken. Where possible, generation of dust should be avoided. In minor dusty conditions where no chemical vapour has been identified, it is recommended that a particulate mask be worn to reduce potential for inhalation of dusts. If weather conditions result in significant dust generation, works should cease and the VPC(M) project manager should be notified immediately. Groundwater (and therefore groundwater contamination) is typically not encountered within the upper 1m of soil profile. However, should groundwater be encountered, physical contact with groundwater should be avoided and specific management will be required. If contact is unavoidable, disposable (latex or nitrile) gloves are recommended. Under no circumstances should groundwater be allowed to enter the storm water or river system via an excavated trench. Unexpected contamination Any material that appears contaminated (i.e. oily, odorous, ash-like or uniquely coloured) should not be used to backfill any subsurface excavations and should be stockpiled separately in a non-public area away from storm water pits/rivers. The VPC(M) project manager should be notified immediately should such soil be encountered. Environmental Impacts All personnel are to ensure that no contaminants are allowed to spill on the ground, enter the storm water system, port waters or atmosphere. Security 5
6 A valid MSIC access card is required to enter the berth. No MSIC card no entry. Access It is unlikely that access will be supported for non-essential services and works when a ship is at the berth. For information pertaining to current and future shipping operations refer to the VPC(M) website at (specifically the Shipping Movements link on the Shipping Operations landing page) or contact your VPC(M) Manager. All requests for access when a ship is at berth are to be forwarded to the Duty Port Safety Officer. Weapons and Prohibited Items in Maritime Security Zones Persons who are granted unrestricted access into a common user facility shall be aware that unauthorised carriage or possession of weapons or prohibited items is an offence under Section 127 of the Maritime Transport and Offshore Facilities Security Act 2003 (MTOFSA). Any person found to have breached the act shall have unrestricted access cancelled and may be liable for penalties associated with the breach of the MTOFSA. Emergency evacuation All persons entering the site are to be familiar with the site s evacuation plan (where available), normally located at the entry point of the site. In the event of an emergency: CALL 000, if the site has a POM number reference this to the emergency services Ensure your area is safe e.g. clear access and egress and isolate all equipment Move to a safe location and await the arrival of emergency services and further instructions Important Points of Contact Police Fire Ambulance Vessels at berth (emergencies) Chief Warden / UHF 9 Melbourne VTS / VHF 12 Crime Stoppers National Anti-Terrorist Hotline Customs Hotline VPC(M) Health, Safety and Environment VPC(M) Community Contact Line Option 4 VPC(M) Head of Corporate Relations VPC(M) Security Officer Port Security Control Room Land Assets Water Assets Station Pier Gate House
Site Safety Brief - F Appleton Dock
Site Safety Brief - F Appleton Dock (Melways Ref: Map 42 J8) November 2015 Purpose The purpose of this site brief is to provide you with the necessary information required to conduct your work safely and
More informationBogo Operations Pollution Incident Response Management Plan
Bogo Operations Pollution Incident Response Management Plan Rhyolite Hard Rock Aggregate Quarry 134 Paynes Road BOOKHAM NSW 2582 PO Box 426 COWRA NSW 2794 p: 02 6227 7260 p: 02 6345 4253 e: info@bogoquarry.com.au
More informationSafe Work Method Statement
Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees
More information2.0 Management Systems and Documentation
SHE Rules BOW142.3 1.0 Introduction This document details the safety, health and environment rules that apply to anyone accessing Arqiva sites and describes the standards of performance expected. This
More informationAppendix 4C - Sample SWMS Trenching
Appendix 4C - Sample SWMS Trenching SAFE WORK METHOD STATEMENT SWMS Reference : Insert document number : Version A Date : Workplace / Project : Company Address: Work Activity / Job / Task or Process :
More informationSafe work method statements
Information about Safe work method statements How to prepare and use a safe work method statement (SWMS) for high risk construction work (HRCW) and who needs to prepare one. October 2018 Key concepts Hazard
More informationHow severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Line Marking This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
More informationHow severely could the risk hurt someone?
Safe Work Method Statement No: WMS-08 Task: Install Drainage This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
More informationWhat is an induction? Contribute to OH&S Processes
What is an induction? Session 2 Contribute to OH&S Processes Types of Induction New Employee Induction Site Inductions Equipment Inductions Activity 2.1 Induction Description What is a Hazard? Session
More informationMinimum Safety Requirements for Contractors Working on Railway Property
Minimum Safety Requirements for Contractors Working on Railway Property Effective_ April 1, 2007 Introduction Canadian Pacific is committed to provide a Safe and Healthy working environment for all Railway
More informationHooded Plover Volunteer Risk Assessment Matrix
Task / Project Title Hooded Plover Monitoring, Nest Protection, Chick Wardening Date of Assessment 5.12.2013 Site / Location Victorian & South Australian coastline Permit to Work Requirement Date of Site
More informationSPILL CONTINGENCY AND EMERGENCY RESPONSE PLAN
SPILL CONTINGENCY AND EMERGENCY RESPONSE PLAN All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the written
More informationIn an emergency the safety of all personnel and the public is of priority.
P272 : Emergency Planning & Response This DOCUMENT and any linked FORMS have been created to provide specific requirements under the Amalgamated Operating System. For additional information and guidance,
More informationCompany Policy Health & safety for work performed at Customer premises
Policy Statement Absolute Calibration Limited is concerned for the welfare of all staff employed by the Company and all personnel who may be affected by its actions during the performance of services at
More informationRISK RATING SAFE WORK METHOD STATEMENT 1 HIGH 2 MEDIUM 3LOW. I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager
RISK RATING 1 HIGH 2 MEDIUM 3LOW SAFE WORK METHOD STATEMENT Title: : Traineeship Ref No: 1 I approve the use of this Safe Work Method Statement: NAME: POSITION: Department Manager SIGNATURE: DATE: / /
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationTemporary load-bearing support for structural alterations or repairs
CRITICAL NOTE This document only becomes a Safe Work Method Statement where the High Risk Construction Work section of this document is completed Company: ABN: Contact Person: Ph: Project/Site: Principal
More informationAppendix C Health and Safety Guidelines for investigators
38 Appendix C Health and Safety Guidelines for investigators Introduction Investigations must be conducted in a safe manner. This document provides an overview of the health and safety guidelines investigators
More informationSafety, health and environment values that are expected of all persons who are working and visiting the Quattro Ports Port Kembla Grain Terminal,
Overview In accordance with the Quattro Ports Safety, Health and Environmental Policy - Safety First is paramount to Quattro Ports. Our employees and contractors are our most important asset and their
More informationSCOUTS AUSTRALIA NSW
SCOUTS AUSTRALIA NSW Contractor Health and Safety Handbook 2 Scouts Australia NSW Contractor Safety Handbook v 5.0 Frebruary 2018 Contents... 2 Contractor Health and Safety Handbook... 2 Revisions... 2
More informationRIIWMG203D Drain and Dewater Civil Construction Site Learner Guide
RIIWMG203D Drain and Dewater Civil Construction Site Table of Contents 1.1 Introduction... 3 1.1.1 Drainage and Dewatering... 3 1.2 Site Policies and Procedures... 5 1.3 Work Instructions... 6 1.3.1 Reading
More informationPrimePort Timaru Aide for Vessel Managers
PrimePort Timaru Aide for Vessel Managers Persons Conducting a Business or Undertaking (PCBU) You are required to nominate person who is responsible for supervising your operational activities within your
More informationRisk Assessment Form (Qualitative)
Assessment Form (Qualitative) Project / ocation:..d.a.s WATERS Contract No: RA & Issue No: 008 Prepared by:.r.smit Date: 10/10/16 Signature: ACTIVITY DESCRIPTION: Person (s) at risk: General Ground works
More informationInstructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading
Instructions for the Use of the Excel Spreadsheet There are Three tabs at the bottom of this worksheet Instructions tab is the one you are reading H&S Plan Tab The Plan Tab is the front cover pages of
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationSafe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN
JOB NO: PROJECT: DATE: 1/1/2018 SWMS NO: SWMS 001.1 PREPARED BY: LUKE BLINCO REVISED BY: ACTIVITY: TREE REMOVAL & PRUNING SIGNED BY: REVISION DATE: MINIMUM PERSONAL PROTECTIVE EQUIPMENT (PPE) REQUIREMENTS
More informationTo comply with the OHS Act, the responsible manager must carry out and document the following:
Owner: Manager Health, Wellbeing and Safety Last Update: 10 January 2018 Contents 1. Purpose... 1 2. Minimum Compliance Requirements... 1 3. Definitions... 2 4. Legislative requirements under the OHS Act
More informationB S Glass Ltd Safety procedures- outsourced Workplaces
B S Glass Ltd Jan 17 B S Glass Ltd Safety procedures- outsourced Workplaces Index - - - - - - - - Page No On Site safety - - - - - - - - - - - - - - - - - - - Content 3. 1.00 Health and Safety Mission
More informationConfined Spaces. This procedure applies to all workers of the Diocese of Maitland Newcastle (DoMN).
Purpose To provide guidance in controlling the risks associated with confined spaces including identifying confined spaces, working in a confined space and issuing confined space entry permits. Scope This
More informationHow severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-02 Task: Concreting, Formwork and Steel Fixing This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia)
More informationTwo phases have been established for the classification of incidents to help in determining the appropriate course of action;
1.0 CLASSIFICATION OF AN EMERGENCY SITUATION Two phases have been established for the classification of incidents to help in determining the appropriate course of action; Alert phase, and Emergency phase.
More informationMethod Statement Author
Plan Bee Limited 3.3 Etna Industrial estate Clamp Road Motherwell Scotland ML2 7XQ Tel: 01698580572 Method Statement Method Statement Details Method Statement Number 7 Method Statement Date Monday 3rd
More informationSafety File. Contract Avonbourne School Prepared By Steve Steel Date 20 th July 2008
S.P.S LOUVRE SYSTEMS LIMITED Directors S.C Steel & S.A Pearce Company Registration No. 5794591 VAT Registration No, 885 2670 86 CIS Scheme No, 9197816897101 Safety File Contract Avonbourne School Prepared
More informationJOB SAFETY ENVIRONMENT ANALYSIS (JSEA) Working With In Situ Testing Rigs
Personnel Involved Manager Project Operators Assistant Notes re Operator/Off-Sider Training Allan McConnell In situ testing is a niche business with very few rigs in Australia. There are no specific training
More informationWORK METHOD STATEMENT TERMITE PROTECTION
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationINDUCTION GUIDE. USC Low-risk Contractor
INDUCTION GUIDE USC Low-risk Contractor usc.edu.au Rise, and shine. INDUCTION GUIDE USC Low-risk Contractor Contents 1 Definitions... 1 2 Introduction... 2 3 General responsibilities of Contractors...
More informationMonash University Academy of Performing Arts Safety Induction
Monash University Academy of Performing Arts Safety Induction Safety induction for the Robert Blackwood Hall Revised August 2013 Welcome to the Monash University Academy of Performing Arts induction for
More informationProcedure: Work health and safety hazard management
Procedure: Work health and safety hazard management Purpose This procedure describes how the Australian National University (ANU) manages Work Health Safety hazards for the health, safety, rehabilitation
More informationPotential risk of injury to staff
Register Fire, Earthquake - other Emergencies Manual Handling and Repetitive Work Repetitive, Forceful Work Poor Housekeeping Not Wearing PPE (Personal Protective Equipment) Potential risk of injury to
More informationContractor OHS Induction. AOHS-05-GUI September 2016
Contractor OHS Induction AOHS-05-GUI-002 8 September 2016 1 About AQWEST AQWEST is a Government Trading Enterprise responsible for supplying drinking water to Bunbury. Formed in 1906 as the Bunbury Water
More information1. What is the top priority when working on Canadian Pacific (CP) property? 2. When working on CP property what must all Contractors comply with?
1. What is the top priority when working on Canadian Pacific (CP) property? A. Production B. Safety C. Quality D. Project deadline 2. When working on CP property what must all Contractors comply with?
More informationWHS OHS HAZARD REGISTER (SITE AND OFFICE OPERATIONS)
WHS 017 - WHS 017 Hazard Register - Version 5.0 April 20 Doc No: WHS 017 Effective Date: 04/04/20 1 WORKING WITH EARTHMOVING PLANT/ TRUCKS/SITE VEHICLES COLLISIONS OTHER PLANT EQUIPMENT SITE VEHICLES PERSONNELL
More informationGeneric Health and Safety Risk Assessment
Generic Health and Safety Risk Assessment Acheta Consulting Ltd Assessment completed by: Dr John Simmons (Managing Director), April 2017 Review date: May 2018 Introduction During the course of your work
More informationSUPPLIER HEALTH AND SAFETY. Supporting a healthy and safe working environment for our people and customers
SUPPLIER HEALTH AND SAFETY Supporting a healthy and safe working environment for our people and customers Document Template Control Prepared by Georgina East May 2017 Date Approved by May 2017 Mark Beder
More informationSAFE WORK METHOD STATEMENT Part B
SAFE WORK METHOD STATEMENT Part B SWMS No.: 01 WORK ACTIVITY DESCRIPTION: Door Installation All FORESEEABLE OHS & ENVIRONMENTAL HAZARDS & RISKS ASSOSSIATED WITH THE WORKS MUST BE ASSESSED & ALLOCATED CONTROLS
More informationOperation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015
Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039 Name Date Signature Author Jarred Hearle 27/11/2015 Reviewed FMG Site Team 27/11/2015 ---------- Approved Geoff Selfe 27/11/2015
More informationEmergency Response Plans
PO Box 2114 Woonona East NSW 2517 (WOLLONGONG) PTY LTD Ph: 0417 420 760 Fax: 02 4283 2216 A/H: 02 4283 7727 EPA Licence: 11788 ABN: 57 079 336 799 Unit 11 Lot 1 York Place Woonona NSW 2517 Emergency Response
More informationSafe Work Method Statement Tasks
Safe Work Method Statement Tasks SWMS Venue: Date Created: Address: Contact: Adelaide and surrounding suburbs 23 rd August 2017 27 Valetta Rd Kidman Park SA 5025 Daniel Renshaw CONTROLLED DOCUMENT Page
More informationSafety Guidelines for Live Entertainment and Events I Part 2. Hazard Identification and Risk Management 1
Safety Guidelines for Live Entertainment and Events Part 2. Hazard Identification and Risk Management Contents Disclaimer... 1 1. Principles of Risk Management... 2 2. The Risk Management Process... 2
More informationIPSWICH. Port Safety Notice
IPSWICH Port Safety Notice 19th October 2018 1 Associated British Ports Ipswich Port Safety Notice to Masters Introduction: This Port Safety Notice has been developed and communicated to provide general
More informationSAFE WORK METHOD STATEMENT SWMS No Version
SAFE WORK METHOD STATEMENT SWMS No Version Company Name: Hunter Readymixed Concrete Pty Ltd 00 004 Location: Thornton Cessnock Tea Gardens Gateshead ABN: 6 076 08 695 SWMS Developed By: Duane Harrison
More informationContractor / Exhibitor Handbook
Contractor / Exhibitor Handbook Health and Safety This booklet outlines the basic rules that must be followed by contractors and other visitors working on Live Promotions Events sites. The contractors
More informationPOLICY FOR COSHH (CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH) POLICY
POLICY FOR COSHH (CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH) POLICY Written By: Nursery Manager Date approved by Directors: Signature: Date for Review: November 2018 COSHH (CONTROL OF SUBSTANCES HAZARDOUS
More informationWork Activity (e.g. Road Work): Work Location:.
Working with Cranes Work Activity (e.g. Road Work): Work Location:. GENERAL INFORMATION Hinchinbrook Shire Council Lannercost Street Ingham Qld, 4850 ABN 46 291 971 168 Ph: 47764610 All personnel conducting
More informationSAFE WORK METHOD STATEMENT CARPENTER
HOST EMPLOYER DECLARATION I declare the worker/s named on this work authority have been provided with a site specific safety induction that complies with the requirements of the Workplace Health & Safety
More informationSafety, Health & Environment Contractor Induction. IT Contractor
Safety, Health & Environment Contractor Induction IT Contractor Contents 1. Contents 2. Welcome to Woolworths 3. Safety & Health Policy 4. Arrival at Site/Store 5. Hazards & Incidents 6. Emergency Preparedness
More informationBHC-P-07.2 Health Hazards in Construction
BHC-P-07.2 Health Hazards in Construction Contents 1.0 Purpose 2.0 Scope 3.0 Definitions 4.0 Main requirements 5.0 Guidance documents and references 6.0 Appendices Revision Register Date Version Description
More informationHealth and Safety Policy Statement
Health and Safety Policy Statement Agfirst Bay of Plenty Limited is committed to maintaining a safe and healthy working environment for our employees, contractors and other persons visiting the workplace.
More informationPocklington Town Council Risk Assessment Christmas Festival Wednesday Assessor: Gordon Scaife Date
Activity: Christmas Festival Wednesday Assessor: Gordon Scaife Date 16/07/2018 5 December Completed: Persons At Risk: PTC Staff, Volunteers & Public Reference: 180716 Public Events Review Date: 16/07/2019
More informationFLYING OBJECTS MANUAL HANDLING EXCESSIVE NOISE
JOB NO: PROJECT: DATE: SWMS NO: SWMS 002 PREPARED BY: Ian Hartley REVISED BY: Nick Bragg & Cameron McNeil ACTIVITY: STUMP REMOVAL SUPERVISED BY: REVISION DATE: April 2016 MINIMUM PERSONAL PROTECTIVE EQUIPMENT
More informationHarbour Town Gold Coast Site Induction
Harbour Town Gold Coast Site Induction At Harbour Town Gold Coast we believe that safety is integral to the way we do business. We are committed to operating a safe environment for all where we are incident
More informationGENERAL WORK HEALTH & SAFETY CHECKLIST INTENDED USE. St Euphemia College - General Work Health and Safety Checklist
GENERAL WORK HEALTH & SAFETY CHECKLIST INTENDED USE This document is a summary checklist intended for employees as well as the School executive, and sets out the measures that a PCBU should put in place
More informationBuchanan. Approved: John Downes
Severity Site triio Activity Vacuum Excavator Persons conducting assessment SHEQ DEPT Assessment No triio 21 Review Date 11/01/2021 Revision No. 10 Name: Paul Disley/Ian Buchanan Signature Date: 11/01/2019
More informationSAFE WORK METHOD STATEMENT
SAFE WORK METHOD STATEMENT EXCAVATION OR TRENCHING Prepared for Client: Rural Construction & Maintenance Pty Ltd Project No: 1 Site: 660 Great Ocean Road, Bellbrae Date Prepared: 29/07/2015 1. RESPONSIBILITIES
More informationSection 1. Contact Information. Procedure Title: Procedure Author: Date of SOP Creation/Revision: Name of Responsible Person: Location of Procedure:
Western Carolina University Standard Operating Procedure for the use of Sodium amide This is an SOP template for a specific chemical or class of chemicals and is not complete until: 1) lab specific information
More informationThe purpose of this document is to establish the procedures for accident prevention and investigation at (Insert Company Name) jobsites.
CORPORATE SAFETY MANUAL ENVIRONMENTAL, HEALTH AND SAFETY STANDARDS TITLE: Document Number: * Issue Date: Revision Date: * 1 Purpose The purpose of this document is to establish the procedures for accident
More informationTEMPLE UNIVERSITY ENVIRONMENTAL HEALTH AND RADIATION SAFETY
Purpose In accordance with applicable regulations and Temple University, this policy was developed to minimize exposure to glutaraldehyde. Applicability This policy is applicable to all Temple University
More informationWork Health and Safety Risk Management Procedures
Work Health and Safety Risk Management Procedures Table of Contents 1. Governing Policy 2. Purpose 3. Scope 4. Definitions 5. Responsibilities 6. Risk Management Process 6.1. Process summary 6.2. Hazard
More informationCONFINED SPACE PROGRAM
CONFINED SPACE PROGRAM Last updated: November 2017 1.0 PURPOSE Entry into a confined space represents a significant risk of serious injury or death to individuals not prepared for the hazards they may
More informationKIERNAN ELECTRICAL SITE INDUCTION. Site Supervisors: Chris Lettice
KIERNAN ELECTRICAL SITE INDUCTION Site Supervisors: Chris Lettice Safety Officer: Lilianne Magner INDUCTION CONTENTS Introduction to company safety policy Scope of Works Site team members Site Layout Site
More informationControl of Work. Introduction This procedure describes the management of Asbestos. Definitions
Home Knowledge Control of Work Search Asbestos Introduction This procedure describes the management of Asbestos. The management approach shall be in accordance with the requirements of the Control of Asbestos
More informationWORK METHOD STATEMENT CARPET LAYING
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationHazard Management Making your workplace safer
Hazard Management Making your workplace safer A Guide to Hazard Identification, Risk Assessment, Control and Reviewing 1 What is a hazard? A hazard is something which has the potential to harm the health,
More informationScope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such activities.
11/13/1995 4 5/20/2013 1 of 10 Authority and Scope Regulation: 29 CFR 1910.146 Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such
More informationHAZARDOUS INCIDENT SITE SAFETY PLAN
HAZARDOUS INCIDENT SITE SAFETY PLAN NOTE: A site-specific Site Safety Plan must be developed and implemented for each site where investigators may potentially be exposed to hazardous substances while conducting
More informationPLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO LOW LEVEL LIGHT UNITS
PLANNED LIGHTING MAINTENANCE LTD METHOD STATEMENT & RISK ASSESSMENT REPLACEMENT OF LAMPS OR REPAIRS TO LOW LEVEL LIGHT UNITS Project: Insert Client Repair/ Replacement of low level light units/ low level
More informationContractor handbook. Purpose
Page no: 1 / 6 Contractor handbook Purpose Mitie aims to ensure that the highest levels of performance are achieved by all persons working for us or on our behalf. We require the same level of performance
More informationStandard Reference Document OPERATING STANDARD 3 PERSONAL PROTECTIVE EQUIPMENT (PPE) AND CLOTHING STANDARD OS 3
Standard Reference Document OS 5 OPERATING STANDARD 3 PERSONAL PROTECTIVE EQUIPMENT (PPE) AND CLOTHING STANDARD OS 3 SAFE LOAD PROGRAM The contents, concepts and information in this operating standard
More informationContractor/Visitor Safety Orientation UNBC
Contractor/Visitor Safety Orientation UNBC 3333 University Way, Prince George, BC V2N 4Z9 Revised: October 2015 For All Emergencies call Security 250-960-7058 ***DO NOT DIAL 911*** Important UNBC Telephone
More informationRail Grinding & support teams
Working with On Track Machines Rail & Support Teams RCS No: TCS006 Issue: 1 Key Risks! in Possessions in Tunnels Fire in Electrified areas Working in the vicinity of OHL Noise/ Dust / Fumes Personnel Involved
More informationSummary of Standards for Key Items of PPE
Summary of Standards for Key Items of PPE This is a guide to the selection of suitable PPE. In some cases certain PPE is mandatory and forms part of a safe system of work. These are the minimum requirements
More informationOPERATIONAL GUIDELINE P R O C E D U R E
OPERATIONAL GUIDELINE O.G. # 2.23.12.04 TITLE: HAZMAT HAZARDOUS SUBSTANCES- ASBESTOS PURPOSE: SCOPE: POLICY: To provide information to Burnaby Fire Department personnel regarding a consistent response
More informationAirside Safety Airside Operational Instruction 07
Airside Operational Instruction 60 Airside Working Practices and PPE Requirements Airside Operational Instruction 07 Content 1. Airside Working Practices and PPE Requirements 2. Briefings 3. Airside Smoking
More informationPowerplay Paintball Brighouse Risk Assessment
Chemical Gas bottles Vehicles Physical Electricity Environment Machinery Powerplay Paintball Brighouse Risk Assessment Location Powerplay Paintball Wakefield and Brighouse Venues Carried out by: Steven
More informationTEMPLE UNIVERSITY ENVIRONMENTAL HEALTH AND RADIATION SAFETY
Page 1 of 9 ISSUED: 5/00 REVISED: 08/06 Introduction Purpose: In accordance with applicable regulations and Temple University, this policy was developed to minimize exposure to Ethylene Oxide. Applicability
More informationLOCATION OF WORK WRITTEN BY: APPROVED BY: DATE LAST REVISION Schools in PTSD Lorie Carriere Gordon Howe June 24, 2010 November 14, 2017
Page 1 of 8 LOCATION OF WORK WRITTEN BY: APPROVED BY: DATE LAST REVISION Schools in PTSD Lorie Carriere Gordon Howe June 24, 2010 November 14, 2017 HAZARDS PRESENT Sharp ceiling protrusions e.g. nails
More informationJOB SAFETY ANALYSIS. How to use the Risk Assessment Charts. Likelihood A (Almost Certain) B (Likely) C (Possible)
Page 1 of 6 How to use the Assessment Charts 1. Determine the Likelihood on the Qualitative Assessment Process Chart (pick a letter applicable to the task). 2. Determine the Consequence on the Qualitative
More informationCOREWEST DIAMOND DRILLING LTD. * ENVIROMENT, HEALTH AND SAFETY PROGRAM* APPENDIX A GENERAL WORKSAFE PRACTICES
COREWEST DIAMOND DRILLING LTD. * ENVIROMENT, HEALTH AND SAFETY PROGRAM* APPENDIX A- - - - - - - GENERAL WORKSAFE PRACTICES 1) HEALTH AND SAFETY POLICY 2) PERSONAL PROTECTIVE EQUIPMENT 3) HOUSEKEEPING 4)
More informationFarnsfield Parish Council Risk Assessment Litter Picking
Farnsfield Parish Council Risk Assessment Litter Picking Organisation: FARNSFIELD PARISH COUNCIL Date of Assessment: June 2016 Name of Assessor: Rachel Waterfield Date of Review: June 2017 No 1 Physical
More informationAccidents and accident prevention
Accidents and accident prevention What is an accident? 1. Oxford Dictionary An unforeseeable event often resulting in injury. 2. British Safety Council A management error; the result of errors or omissions
More informationControl of Allergies to Laboratory Animals
Health and Safety Policy Control of Allergies to Laboratory Animals UHSP/21/CALA/03 This document sets out in more detail the arrangements for compliance with University Health and Safety Policy at Budget
More informationHealth, Safety & Environmental Policy. Rotec Hydraulics Ltd
Health, Safety & Environmental Policy Rotec Hydraulics Ltd Venture Way Priorswood Industrial Estate Taunton TA2 8DE Revision Status Revision Date Issued Approved by Signature 01 02/10/12 Paul Prouse 02
More informationSUPAGAS PTY LTD POLLUTION INCIDENT RESPONSE MANAGEMENT PLAN
POLLUTION INCIDENT RESPONSE MANAGEMENT PLAN SITE: INGLEBURN CONTENTS 1 INTRODUCTION 4 1.1 Background... 4 1.2 Aim of the Emergency Response Plan... 4 1.3 Definition of a Pollution Incident... 4 2 OBJECTIVES
More informationSH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH M ABN
SH&E Work Method Statement Concrete Cutting & Drilling Fast Cut Qld Pty Ltd, 91 Basalt, GEEBUNG PH 07 3265 6537 M 0411 756 719 ABN 45 081 359 613 OHS-FRM-100 Rev 11 (07/18) Page 1 SH&EWMS No.: F-C-QLD-30
More informationWORKING AFTER-HOURS OR ALONE GUIDELINE
WORKING AFTER-HOURS OR ALONE GUIDELINE Section Health and Safety Contact University Health and Safety Manager Last Review December 2014 Next Review December 2017 Approval University Health and Safety Manager
More informationThis procedure must be read in conjunction with WHS-PRO-020: Emergency Procedures
1. Purpose Document No: WHS-PRO-021 Approval Date: 8/04/17 EMERGENCY WARDENS Approved By: G. Mowbray Review Date: 8/04/19 Responsible Officer: Expiry Date: N/A Employment Relations Advisor Issue No: 8/04/17
More informationDate of Site Visit: Project Site Location: Contract Number: Task Order Number: Contractor s Name: Contractor s Address: Prepared by: Signature: Date:
U.S. ARMY ENGINEERING AND SUPPORT CENTER, HUNTSVILLE (USAESCH) ABBREVIATED ACCIDENT PREVENTION PLAN (AAPP) NOTE: For Site Visits only. (Please type or print) Date of Site Visit: Project Site Location:
More informationWorking safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
More informationWORK METHOD STATEMENT STRUCTURAL STEEL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationIssue Date 11/21/13 Revision Date 01/04/18 Benzene
PURPOSE The purpose of this program is to define work practices, administrative procedures and engineering controls to reduce employee exposure to or below the PEL of benzene. This plan shall be implemented
More information