Location and Avoidance of Underground Apparatus
|
|
|
- Derick Brooks
- 6 years ago
- Views:
Transcription
1 National Unit specification: general information Unit title: Location and Avoidance of Underground Apparatus Unit code: F Superclass: TK Publication date: October 2014 Source: Version: Scottish Qualifications Authority Second Credit points and level 1 National Unit credit(s) at SCQF level 5: (1 SCQF credit points at SCQF level 5*) *SCQF credit points are used to allocate credit to qualifications in the Scottish Credit and Qualifications Framework (SCQF). Each qualification in the Framework is allocated a number of SCQF credit points at an SCQF level. There are 12 SCQF levels, ranging from Access 1 to Doctorates. F932 04, Location and Avoidance of Underground Apparatus (SCQF level 5)
2 UNIT 001 Location and avoidance of underground apparatus Unit Aim This unit is designed to allow the candidate to demonstrate the skills and knowledge required to successfully locate and avoid underground utilities apparatus and highways services. The candidate will know how to interpret plans, and confirm that the plans used correspond with details of the work site. They will be able to identify the different types of underground utilities apparatus and highways services that are encountered prior to carrying out excavation, and to identify the risks and implications of damage to underground utilities apparatus and highways services. The candidate must also show that they can use pipe and cable location equipment to locate underground utilities apparatus and highways services. Learning Outcome 1 Interpret plans showing location of underground apparatus 1.1 inspect the work site to confirm that it corresponds with the plans 1.2 identify visual indications of services being present on the site location 1.3 identify symbols on plans, covering water, gas, sewers, telecommunications and electricity and highways services and structures 1.4 check and confirm that the information recorded on plans is accurate and current for the site Learning Outcome 2 Understand how to interpret plans showing location of underground apparatus 2.1 describe the criteria for checking that plans are current 2.2 identify the types of symbols and legends that are used on plans 2.3 identify different types of services on plans 2.4 explain the importance of marking the site clearly prior to excavation. Learning Outcome 3 Identify utilities apparatus and highways services encountered during excavation 3.1 identify the underground utilities apparatus on the site 3.2 identify the highways services on the site 3.3 identify damage to utilities apparatus and highways services. 2
3 Learning Outcome 4 Understand how to identify types of utilities apparatus and highways services encountered during excavation 4.1 identify the different types of underground utilities apparatus 4.2 identify the different types of highways services 4.3 describe the distinguishing characteristics of different types of underground utilities apparatus 4.4 describe the distinguishing characteristics of different types of highways services. Learning Outcome 5 Identify the risks and implications of damage to underground utilities apparatus and highways services 5.1 carry out a risk assessment on utilities apparatus and highways services on site 5.2 ensure that contingency plans are in place in case of damage occurring to utilities apparatus and highways services. Learning Outcome 6 Understand the risks and implications of damage to underground utilities apparatus and highways services 6.1 identify the elements in a risk assessment on utilities apparatus and highways services 6.2 identify damage to different types of underground utilities apparatus and highways services 6.3 explain the implications of damage to different types of underground utilities apparatus and highways services 6.4 explain how to minimise the effects of damage to underground utilities apparatus and highways services 6.5 describe the content of contingency plans in relation to damaged underground apparatus. Learning Outcome 7 Use pipe and cable location equipment 7.1 select equipment for the pipe and cable location activity 7.2 check that the equipment to be used is fit for purpose 7.3 prepare equipment for use 7.4 complete the search procedures to locate underground utilities apparatus 7.5 interpret the results of search procedures accurately 7.6 mark the site clearly showing the location of services found using cable and pipe location equipment 7.7 compare the results of searches undertaken with the information on the site plans. 3
4 Learning Outcome 8 Understand the use of pipe and cable location equipment 8.1 describe the operational limitations of different pipe and cable location equipment 8.2 explain how to select equipment that is fit for purpose 8.3 explain the procedure for notifying the relevant authority of discrepancies between search results and site plans 8.4 explain the procedure to follow where underground utilities apparatus cannot be found using pipe and cable location equipment. Learning Outcome 9 Follow safe working practices 9.1 follow current relevant health and safety regulations, standards and other legislation relating to: (a) working practices within the construction environment (b) working practices specific to any practical task that they are required to carry out 9.2 identify the current relevant health and safety regulations, standards and other legislation that must be applied in relation to: (a) working practices within the construction environment (b) working practices specific to any practical task that they are required to carry out Evidence Requirements / Scope Some terms, used in the assessment criteria, cover a range of situations, as follows: 1. Utilities apparatus includes: (a) plastic and metallic gas mains (b) plastic and metallic water mains (c) sewers and drains (d) low- and high-voltage electricity cables (e) telecommunications and television cables (f) optic fibre. 2. Highways services includes: (a) highway drainage (b) culverts (c) land drains (d) highways/road with special engineering controls. 3. The symbols and legends must cover a minimum of three of the following types: (a) water (b) gas (c) sewers (d) telecommunications (e) electricity. 4. Safe working practices may include: 4
5 (a) (b) (c) (d) (e) (f) safe use of tools and equipment use of PPE, including, as necessary: high visibility jacket or waistcoat, hard hat, ear defenders, gloves, protective footwear, waterproof clothing, eye protection visor/goggles, dust mask use of risk assessment methods to identify and control hazards on site precautions to minimise danger or inconvenience to road users precautions to minimise danger or inconvenience to site personnel precautions to minimise damage to equipment or apparatus. 5. Regulations, standards and other legislation include: (a) Health and Safety Guidance 47, Avoiding Danger from Underground Services (b) Health and Safety Guidance 150, Health and Safety in Construction. 6. Potential implications of damage to underground utilities apparatus include: (a) health and safety hazards (including personal injury and dangerous situations) (b) disruption of service (c) disruption of traffic. 7. Equipment used when locating pipes and cables includes: (a) proprietary pipe and cable location equipment (b) suitable marking equipment (c) personal protective equipment. Assessment Requirements Assessment for this unit consists of practical observations and knowledge questioning to cover the requirements of the learning outcomes. Current requirements for practical observations, including assessor and verifier qualifications and facilities requirements are provided in the joint awarding organisation centre document. 5
1 National Unit credit(s) at SCQF level 5: (1 SCQF credit points at SCQF level 5*)
National Unit specification: general information Unit title: Excavation in the Road/Highway Unit code: F933 04 Superclass: TL Publication date: October 2014 Source: Version: Scottish Qualifications Authority
Reinstatement in Hot-lay Bituminous Materials
National Unit specification: general information Unit title: Reinstatement in Hot-lay Bituminous Materials Unit code: F937 04 Superclass: TK Publication date: October 2014 Source: Version: Scottish Qualifications
Reinstatement of sub-base and base (roadbase) in non-bituminous materials
This unit covers the requirements that you must meet when reinstating sub-base and base (roadbase) in. You must ensure that you act in accordance with all current specifications and procedures and that
Monitoring excavation in the highway
This unit covers the requirements that you must meet when monitoring excavation work in the highway. You must ensure that you act in accordance with all current specifications and procedures and that you
Unit 13 Monitoring reinstatement of sub-base and base (roadbase) in non-bituminous materials
This unit covers the requirements that you must meet when monitoring the reinstatement of sub-base and base. You must ensure that you act in accordance with all current specifications and procedures and
Reinstatement in hot-lay bituminous materials
This unit covers the requirements that you must meet when reinstating hot-lay bituminous materials in the highway. You must ensure that you act in accordance with all current specifications and procedures
EUSMUNC06 (SQA Unit Code - FG2W 04) Locate and avoid supply apparatus for Utilities Network Construction
Locate and avoid supply apparatus for Utilities Network Construction Overview This national occupational standard defines the competence involved in locating and avoiding supply apparatus by using appropriate
Level 3 Diploma in Moving Loads in Construction. Qualification Specification
Qualification Specification ProQual 2017 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 4 Support for candidates 5 Assessment 5 Internal quality assurance
Level 2 Award in Working in Medium Risk Confined Spaces
Qualification Specification ProQual 2018 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 4 Support for candidates 4 Assessment 5 Internal quality assurance
Higher National Unit specification. General information for centres. Equine Studies: The Stallion. Unit code: DP25 34
Higher National Unit specification General information for centres Unit title: Equine Studies: The Stallion Unit code: DP25 34 Unit purpose: This Unit is designed to provide candidates with the knowledge
Working safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
Level 2 Award in Working in Low Risk Confined Spaces
Qualification Specification ProQual 2018 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 4 Support for candidates 4 Assessment 5 Internal quality assurance
Level 2 Award in Working in High Risk Confined Spaces
Qualification Specification ProQual 2018 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4 Centre requirements 4 Support for candidates 4 Assessment 5 Internal quality assurance
Higher National Unit Specification. General information for centres. Unit title: Emergency Response and Communications. Unit code: D77X 34
Higher National Unit Specification General information for centres Unit code: D77X 34 Unit purpose: This Unit is about developing a knowledge of the correct procedures to be followed in response to emergencies
Higher National Unit specification. General information for centres. Unit title: Equine Studies: The Brood Mare. Unit code: DP24 34
Higher National Unit specification General information for centres Unit code: DP24 34 Unit purpose: This Unit is designed to enable candidates to develop knowledge and utilise skills in the care and management
RIIWMG203D Drain and Dewater Civil Construction Site Learner Guide
RIIWMG203D Drain and Dewater Civil Construction Site Table of Contents 1.1 Introduction... 3 1.1.1 Drainage and Dewatering... 3 1.2 Site Policies and Procedures... 5 1.3 Work Instructions... 6 1.3.1 Reading
Level 3 Award in Emergency Rescue and Recovery Of Casualties from Confined Spaces
Level 3 Award in Emergency Rescue and Recovery Of Casualties from Confined Spaces Qualification Specification ProQual 2018 Contents Page Introduction 3 Qualification profile 3 Qualification structure 4
UNIT Coastal Navigation 1 (Intermediate 1)
National Unit Specification: general information NUMBER DC63 10 COURSE SUMMARY This unit is designed to enable candidates to understand the basic elements of coastal navigation and to plan a coastal passage
Engineering: Measurement Technology Pressure/Level (SCQF level 6)
National Unit Specification: general information CODE F5KT 12 SUMMARY This Unit can be delivered as part of a National Qualification Group Award but can also be taken as a free-standing Unit. This Unit
Component Specification NFQ Level TBC
Component Specification NFQ Level TBC Using Breathing Apparatus. 1. Component Details Title Teideal as Gaeilge Award Type Code Using Breathing Apparatus TBC Minor TBC Level 6 Credit Value Purpose 15 Credits
SQA Advanced Unit Specification. General information for centres. Golf Courses: Developing Understanding. Unit code: HW8G 48
General information for centres Unit title: Golf Courses: Developing Understanding Unit code: HW8G 48 Unit purpose: The purpose of this unit is to develop an understanding of the golf course, specifically
LEVEL 2 CERTIFICATE OF COMPETENCE IN THE SAFE USE OF MOWERS ASSESSMENT SCHEDULE
NPTC Registered Charity No. 1096429 STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE IN THE SAFE USE OF MOWERS
LANTw17 - SQA Unit Code H2RX 04 Prepare for, and agree, emergency treework operations
Prepare for, and agree, emergency treework operations Overview This standard is about preparing and agreeing to undertake emergency treework operations. The standard includes the safe preparation and undertaking
QCF Unit and Assessment Specification
QCF Unit and Assessment Specification Unit title Ofqual Unit code Working Safely in an Engineering Environment L/600/5781 SQA Unit code FT2R 60 SSC Ref Unit 78 History of changes Publication date: March
This standard comprises the following:
Overview in accordance with approved procedures and practices. This standard comprises the following: 1 Complete and check the initiation circuit 2 Clear and secure the danger zone 3 Sound warning and
LEVEL 2 CERTIFICATE OF COMPETENCE IN THE SAFE USE AND OPERATION OF MOBILE ELEVATED WORK PLATFORMS
NPTC Registered Charity No. 1096429 NATIONAL AGRICULTURAL CENTRE STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7669 6553 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE
This Unit is a mandatory Unit in the National Certificate in Gamekeeping but is also available for candidates wishing to study the Unit on its own.
National Unit specification: general information Unit code: FN5F 11 Superclass: SC Publication date: July 2011 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is intended for candidates
NPTC LEVEL 2 AWARD IN THE SAFE USE OF PESTICIDES (QCF) MODULE PA4S PESTICIDE SLUG PELLET APPLICATOR
NPTC Registered Charity No. 1096429 BUILD 500, ABBEY PARK, STARETON, WARWICKSHIRE CV8 2LY Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk NPTC LEVEL 2 AWARD IN THE SAFE USE OF PESTICIDES
NZQA registered unit standard version 3 Page 1 of 7. Plan electrical installations for explosive atmospheres
Page 1 of 7 Title Plan electrical installations for explosive atmospheres Level 5 Credits 8 Purpose This unit standard is intended for use in the training and assessment of people who work with electrical
Higher National Unit Specification. General information for centres. Unit title: Ship Stability 2. Unit code: D78J 35
Higher National Unit Specification General information for centres Unit code: D78J 35 Unit purpose: This Unit is about the theory and practice affecting stability, trim and structural loading for the safe
NZQA registered unit standard version 1 Page 1 of 8. Conduct detailed inspection of electrical installations for explosive atmospheres
Page 1 of 8 Title Conduct detailed inspection of electrical installations for explosive atmospheres Level 5 Credits 5 Purpose This unit standard is intended for use in the training and assessment of people
1. What is the top priority when working on Canadian Pacific (CP) property? 2. When working on CP property what must all Contractors comply with?
1. What is the top priority when working on Canadian Pacific (CP) property? A. Production B. Safety C. Quality D. Project deadline 2. When working on CP property what must all Contractors comply with?
Traffic Management Act 2004 implications of enactment. Nancy Cox Regulatory and Interconnect Manager August 2004
Traffic Management Act 2004 implications of enactment Nancy Cox Regulatory and Interconnect Manager August 2004 Traffic Management Act 2004 Traffic Officers Network management by local traffic authorities
COGPOLY39 Meet safety, health and environmental requirements in the workplace
Meet safety, health and environmental requirements in the workplace Overview This unit is for those with responsibilities for meeting safety, health and environment requirements in the workplace. It is
PERSONAL PROTECTIVE EQUIPMENT GUIDANCE
Legislation requires a workplace to identify and assess significant hazards (via a risk assessment) associated with workplace activities. The purpose of the assessment is to enable a valid decision about
How severely could the risk hurt someone?
Safe Work Method Statement No: WMS-08 Task: Install Drainage This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
Pre-control risk estimate. Likelihood Risk
Activity Consequence s mitigation measures Site Access & Egress Slips, trips & falls al injury by falling. Sprains & broken bones. Site operatives 3 4 12 Ensure access to site is kept clear of plant &
1788 Level 2 NVQ Diploma in Engineering Maintenance
1788 Level 2 NVQ Diploma in Engineering Maintenance Qualification handbook for centres 501/0377/5 www.cityandguilds.com September 2010 Version 1.0 1788 NVQ Diploma in Engineering Maintenance About City
Higher National Unit specification: general information
Higher National Unit specification: general information Unit code: H4K8 35 Superclass: LB Publication date: July 2013 Source: Scottish Qualifications Authority Version: 01 Unit purpose The purpose of this
Pocklington Town Council Risk Assessment Christmas Festival Wednesday Assessor: Gordon Scaife Date
Activity: Christmas Festival Wednesday Assessor: Gordon Scaife Date 16/07/2018 5 December Completed: Persons At Risk: PTC Staff, Volunteers & Public Reference: 180716 Public Events Review Date: 16/07/2019
Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace L/505/0144
Unit Title Ofqual unit reference number (code) Organisation Reference QCF 665 Unit Level Unit Sub Level Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering
Confined Spaces. This procedure applies to all workers of the Diocese of Maitland Newcastle (DoMN).
Purpose To provide guidance in controlling the risks associated with confined spaces including identifying confined spaces, working in a confined space and issuing confined space entry permits. Scope This
NZQA unit standard New US 1Non-coal of 7145 version 1 Page 1 of 5
Page 1 of 5 Title Design and maintain effective ventilation systems for a non-coal underground operation Level 5 Credits 20 Purpose People credited with this unit standard are able to: explain the principles
Essential Standard No. 16. Streetworks - Short duration static works carried out from a vehicle
Key Messages Short duration static works must not exceed 60 mins, including setting up and dismantling traffic management. A vehicle or vehicles should be used whenever possible to protect the workforce.
SEMPEO SQA Unit Code H2CB 04 Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation
Preparing and Manoeuvring Armoured Fighting Vehicles (AFVs) for Maintenance and Transportation Overview This NOS identifies the competencies you need to carry out preparation and manoeuvring activities
C5: Control Emergencies and Critical Situations
C5: Control Emergencies and Critical Situations This unit is about controlling emergencies and critical situations. C5.1 Maintain a State of Readiness C5.2 Control Critical Situations C5.3 Coordinate the
Safe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Dogging of Crane General Loading and Unloading SWMS No. 20 Authorized
SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT
SCOPE OF WORK, SAFETY METHOD STATEMENT & RISK ASSESSMENT Prepared for:- Date:- Work Scheduled:- SCOPE OF WORK Carry out installation of flow meters / pressure sensors. Installation of flow meter procedure
Higher National Integrative Assessment Specification. Title: Nautical Science: Integrative Assessment 1
Higher National Integrative Assessment Specification General Information for centres This Integrative Assessment has been validated as part of the HND Nautical Science. Centres are required to develop
NZQA unit standard version 5 Page 1 of 5. Describe, develop, and maintain basic ventilation systems for an underground coal mine
Page 1 of 5 Title Describe, develop, and maintain basic ventilation systems for an underground coal mine Level 4 Credits 15 Purpose People credited with this unit standard are able to: describe the basic
SFHGEN77 - SQA Code HD48 04 Perform first line calibration on clinical equipment to ensure it is fit for use
Perform first line calibration on clinical equipment to ensure it is fit for Overview This standard relates to first line calibration of specific equipment prior to clinical. Individuals will be able to
Power Unit 075. Maintain Substation Circuit Breakers
Power Unit 075 Maintain Substation Circuit Breakers The specification details the required skills, knowledge and behaviours to establish competence to carry out the maintenance of high voltage power circuit
Understanding health and safety in gas utilisation
Level: 3 Credit value: 11 URN: M/502/8461 Unit aim This unit aims to provide learners with the knowledge and understanding of the general health and safety requirements for working in the gas industry.
LEVEL 2 CERTIFICATE OF COMPETENCE IN CHAINSAW AND RELATED OPERATIONS ASSESSMENT SCHEDULE
Registered Charity No. 1096429 STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE IN CHAINSAW AND RELATED OPERATIONS
How severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Operate Diesel Road Saw This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd
NZQA registered unit standard version 2 Page 1 of 7. Conduct a conformity assessment of explosion-protected apparatus
Page 1 of 7 Title Conduct a conformity assessment of explosion-protected apparatus Level 6 Credits 9 Purpose This unit standard covers the assessment and certification of explosion-protected apparatus
Safety Risk Assessment Driving Grey Fleet Vehicles
One Direct Maintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees Mark Bloxidge H&S Manager 0208 821 5197 One Direct staff driving their
Assembling and testing fluid power systems
Unit 020 Assembling and testing fluid power systems Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
UETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE
UETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE TABLE OF CONTENTS Review Log... 4 Module Basis... 4 1.1 Introduction... 5 1.2 Identify And Control Risks And Hazards... 6 1.2.1 Risk Management...
Contractor OHS Induction. AOHS-05-GUI September 2016
Contractor OHS Induction AOHS-05-GUI-002 8 September 2016 1 About AQWEST AQWEST is a Government Trading Enterprise responsible for supplying drinking water to Bunbury. Formed in 1906 as the Bunbury Water
APPENDIX D HYDRO-VAC
The City of Winnipeg Bid Opportunity No. 33-2018 Template Version: C420160226 - RW APPENDIX D HYDRO-VAC Corporate Safety & Health Division GUIDELINES FOR EXCAVATION OF CABLES BY WATER PRESSURE/VACUUM SYSTEMS
Summary of Standards for Key Items of PPE
Summary of Standards for Key Items of PPE This is a guide to the selection of suitable PPE. In some cases certain PPE is mandatory and forms part of a safe system of work. These are the minimum requirements
EQUIPMENT AND MATERIALS
SCUD Procedure # EMER004 Page 1 of 5 SCOPE AND PURPOSE This procedure is to provide performing outside leak investigations with the necessary procedures for prompt and effective response and to protect
Producing Aircraft Detail Assemblies. Ofqual unit reference number (code) Organisation Reference M/508/4691. Unit Level Level 2. Unit Sub Level GLH 64
Unit Title Ofqual unit reference number (code) Organisation Reference Producing Aircraft Detail Assemblies M/508/4691 QU051487 Unit Level Level 2 Unit Sub Level None GLH 64 Unit Credit Value 14 Sector
Method Statement: Testing Dry Riser System
Method Statement: Testing Dry Riser System Page 1 of 6 Scope of work Test dry riser system in accordance with BS 5306. Definitions For the purposes of this document, the following definitions apply Rising
General maintenance engineering applications
Unit 068 General maintenance engineering applications Level: 2 Credit value: 12 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to cover
Theory Assessment CS Confined Space Entry
Theory Assessment CS 100 - Confined Space Entry Version 8.02 Confined Space Entry Theory Assessment This Theory Assessment will form part of the formal assessment for the following unit/s of competency:
Rescue Technician: Trench Rescue I/II
Rescue Technician: Trench Rescue I/II Skill Sheet Package Based on NFPA 1006: Standard for Technical Rescue Professional Qualifications, 2013 Edition. Alabama Fire College June 2014 REVISED 02/10/17 Alabama
NZQA Expiring unit standard version 7 Page 1 of 8. Demonstrate knowledge of safe working practices in telecommunications.
Page 1 of 8 Title Demonstrate knowledge of safe working practices in telecommunications Level 2 Credits 4 Purpose This unit standard covers basic instruction in safe working practices in the telecommunications
COUNCIL POLICY. Document No: CPL260.5 Approval Date: 23 March 2010 Obstruction
COUNCIL POLICY Road Reserve and Footpath Document No: CPL260.5 Approval Date: 23 March 2010 Obstruction Approved By: Council Review Date: 31 December 2013 Responsible Officer: Version No: 02 General Manager
Release: 1. UEPOPL002A Licence to operate a reciprocating steam engine
Release: 1 UEPOPL002A Licence to operate a reciprocating steam engine UEPOPL002A Licence to operate a reciprocating steam engine Modification History Not applicable. Unit Descriptor Unit Descriptor 1)
New Licensed Asbestos Manager Training
TRAINING SYLLABUS LICENSED WORK WITH ASBESTOS New Licensed Asbestos Manager Training This unit has twenty-three learning outcomes. 1. Recognise the types, uses and risks of asbestos containing materials
Emergency First Aid in the Workplace
Unit title Emergency First Aid in the Workplace SQA code HV82 04 SCQF level 6 SCQF credit points 1 History of changes Publication date: September 2017 Version: 01 Version number Date Description Authorised
Safety Risk Assessment Hand and Power Tools
One Direct aintenance td Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees ark Bloxidge H&S anager 0208 821 5197 Use of hand and power tools B Contractors/Sub
NZQA registered unit standard version 3 Page 1 of 6
Page 1 of 6 Title Report on the integrity of explosion-protected electrical apparatus in explosive atmospheres Level 3 Credits 3 Purpose This unit standard covers the explosion-protection aspects of plant
0.5 National Unit credit(s) at SCQF level 5: (3 SCQF credit points at SCQF level 5*)
National Unit specification: general information Unit code: FN55 11 Superclass: SH Publication date: July 2011 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is designed to provide
Participate in a rescue operation
PUASAR001B Unit Descriptor Employability Skills Prerequisite Unit(s) Corequisite Unit(s) Application of the Unit Unit Sector Participate in a rescue operation This unit covers the competency to participate
Qualifications for Working in Confined Spaces (6150) 6150 Qualification handbook
Qualifications for Working in Confined Spaces (6150) 6150 Qualification handbook www.cityandguilds.com August 2017 Version 8.6 About City & Guilds As the UK s leading vocational education organisation,
Isolation Standard - Tags
Isolation Standard - Tags 1. Purpose To provide Nyrstar Hobart with a procedure designed to ensure anyone working on plant and equipment is kept free from injury or incidents resulting from uncontrolled
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR CFR , ,
ELECTRICAL (COMPREHENSIVE) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.331 335-29 CFR 1926.302, 1926.416, 1926.417 BASIS: The National Safety Council estimates that there are at least 300 deaths
Unit Title: Health and Safety in a Construction Environment
Unit Credit Value: 4 Unit Level: One Unit Guided Learning Hours: 40 Ofqual Unit Reference Number: K/505/1933 Unit Review Date: 30/04/2018 Unit Sector: 5.2 Building and Construction Unit Summary This unit
SAFE WORK METHOD STATEMENT Part B
SAFE WORK METHOD STATEMENT Part B SWMS No.: 01 WORK ACTIVITY DESCRIPTION: Door Installation All FORESEEABLE OHS & ENVIRONMENTAL HAZARDS & RISKS ASSOSSIATED WITH THE WORKS MUST BE ASSESSED & ALLOCATED CONTROLS
Hampstead Hill School Health and Safety Policy: Confined Spaces
All Hampstead Hill School Policies are always to be read and considered in conjunction with Equal Opportunities, Race Equality and Inclusion Policies. This Policy of Hampstead Hill School applies to all
Lowland Leader Award. Lowland Leader Award
Lowland Leader Award 1 Contents Introduction 4 Scope of the Lowland Leader Award Scheme 4 Stages in the Lowland Leader Award Scheme 5 Exemption from training or consolidation 8 Equal Opportunities 8 Complaints
EUSCS04 Overseeing work in confined spaces
Overview This unit is about the duties of a safety attendant (top-man/woman) which does not require entries into confined spaces. It is about controlling the pre-entry procedures and entry into and out
TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more)
TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more) Release: 1 TLILIC2005A Licence to operate a boom-type elevating work platform (boom length 11 meters or
CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY
CONTRACTOR WHS HAZARD STANDARD HAZARDOUS CHEMICALS EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition
Safety Risk Assessment Working at Height: Mobile Tower Scaffold
Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees Mark Bloxidge H&S Manager 0208 821 5197 Working at height from Mobile Tower B Contractors/Sub contractors
Method Statement. Method Statement Details. Signatures. Emergency Contact Details 1/5
Highway Traffic Safety Ltd Lakeside House, 1 Furzeground Way Stockley Business Park Heathrow London UB11 1BD Tel: 02071 111655 Method Statement Method Statement Details Method statement number 4 Method
How severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Line Marking This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
NZQA unit standard version 1 Page 1 of 6. Describe hazards and apply risk reduction techniques and strategies while driving a bus or coach
Page 1 of 6 Title Describe hazards and apply risk reduction techniques and strategies while driving a bus or coach Level 4 Credits 10 Purpose People credited with this unit standard are able to: describe
Overview. Users of this standard will need to ensure that practice reflects up to date information and policies.
Conclude the collection of blood or blood component donations and support, advise and monitor donors following donation procedures Overview This standard covers concluding blood, or blood component donation,
NZQA registered unit standard version 1 Page 1 of 5. Demonstrate knowledge of health and safety when welding and thermal cutting
Page 1 of 5 Title Demonstrate knowledge of health and safety when welding and thermal cutting Level 2 Credits 3 Purpose This unit standard is for people working with welding and thermal cutting equipment
SUP 15 Health & Safety Management Pressure Systems. Unified procedures for use within NHS Scotland
SUP 15 Health & Safety Management Pressure Systems Unified procedures for use within NHS Scotland September 2015 Contents Page Acknowledgements... 3 1. Introduction... 4 2. Purpose of this Procedure...
RISK ASSESSMENT Installation of electrically operated service lifts (non passenger type)
RISK ASSESSMENT 2011 WALLINGTON LIFT MAINTENANCE CO LTD Installation of electrically operated service lifts (non passenger type) 1 1 L a k e s i d e, W a l l i n g t o n, S u r r e y, S M 6 7 J Y T e l
URBAN SEARCH AND RESCUE - OPERATIONS Undertake structural collapse rescue as part of an urban search and rescue (USAR) operation
1 of 6 level: 5 credit: 12 planned review date: December 2004 sub-field: purpose: Specialist Rescue People credited with this unit standard are able to: prepare for a structural collapse operation as part
JOB SAFETY ANALYSIS. How to use the Risk Assessment Charts. Likelihood A (Almost Certain) B (Likely) C (Possible)
Page 1 of 6 How to use the Assessment Charts 1. Determine the Likelihood on the Qualitative Assessment Process Chart (pick a letter applicable to the task). 2. Determine the Consequence on the Qualitative
Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace
RTO Code 41319 Course outline: 111 WH&S E101A UEENEEE101A - Occupational Health and Safety regulations, codes and practices in the workplace Qualification: Applicable to: Unit of competency: Related policies:
UNIT Seamanship: Efficient Deck Hand (SCQF level 6)
National Unit Specification: general information CODE F7HE 12 SUMMARY This Unit is suitable for candidates who aspire to a career in the Merchant Navy, either as a seaman or deck officer. It develops practical
NZQA registered unit standard 1269 version 7 Page 1 of 5. Plan, prepare for, and carry out line shifts in a cable harvesting operation
Page 1 of 5 Title Plan, prepare for, and carry out line shifts in a cable harvesting operation Level 4 Credits 15 Purpose This unit standard is intended for people employed in a cable harvesting operation