PLEASE NOTE. Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer

Size: px
Start display at page:

Download "PLEASE NOTE. Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer"

Transcription

1 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 1 200kg Personal Man Lift (8m) Grove 1999 Toucan 800 S/N: 8217 Other: te: t Operating. Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer Load Rating Lift capacity and SWL clearly and easily identifiable to operator 2 person 200kg Log Book Log Book available and up to date Maintenence Evidence of regular servicing SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate

2 Access to controls controls located so they can be readily and conveniently operated Labelled controls identified so as to indicate their nature, function and direction of operation Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. Partial Roadworthiness Indicators, brake lights, rear reflectors or lights all fitted and undamaged Unable to Verify Stability Stable and secure base Unable to Verify Steering Mechanism and Wheels Wheels and tyres in good condition. Linkages including ball joints, pins and bushes, and tie rods appear in serviceable condition. Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Partial Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Crushing / pinch points are accessible during operation. Partial Protection of Access / Egress Suitable handles and steps for operator to maintain 3 points of contact Stoop access to cage Protection of Anti-slip surface n-slip surface to prevent falling Floor coating worn but acceptable Partial Protection of Guard rails Fixed side rails fitted and lip around edge of floor in line with AS1657 to prevent falling Unable to Verify Warning Devices Audible Alarms Automatic audible alarms are fitted to warn of forward or reversing movement. These alarms emit an intermittent sound which is activated when the gear or drive lever is engaged. Did not view in operation

3 Unable to Verify Warning Devices Lights Lights fitted to warn of forward and reversing movement. Lights are wired to operate continuously or in hazard mode by flashing (i. e. usually when reversing). Lights either work continuously or work when the gear or drive lever is engaged. Flashing light sighted but did not view in operation. Partial Connections Leads in good condition and routed correctly no nicks and fastened securely at ends. Aged and signs of deterioration s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Crushing Hazard Potential for crush-related injuries to operator resulting from being caught between two items of plant, or from unstable / unsecured plant falling on operator. Ensure all precautions are taken to eliminate crushing hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.) and that plant is stable and secure on the ground or suitable bench surface. s Live Power Potential for operators to be electrocuted or seriously injured operating plant in areas with overhead power lines or undergraound power cables. Ensure adequate site plan completed and spotters used. If contact made with live power, operator must stay in the cabin until it is safe. s Log Book Use of this plant requres log book to be maintained by operator. Ensrue log books completed daily in conjunction with pre-start operational checks and all faults / hazards recorded. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

4 s Transport Ensure weight of plant is checked and able to be safely transported onto trucks. Forklifts/cranes should have a SWL within confirmed weight range. Empty any stored consumables prior to transport. Screws, clamps and components may work loose during transport and mounting. Check all screws, clamps and components carefully prior to operation. Ensure a JSA is completed for safe transport, commissioning, setup and operation.

5 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 2 Cut-to-Length Saw (upcut) Elumatec MGS105 S/N: Other: te: With infeed and outfeed roller tables Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Access to controls controls located so they can be readily and conveniently operated Labelled controls identified so as to indicate their nature, function and direction of operation

6 Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Connections Leads in good condition no nicks and fastened securely at ends. 415v plug in Isolation Isolation switch fitted at power source Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Cutting Hazard Potential for operator to sustain cuts from moving parts of plant. Ensure all precautions are taken to eliminate hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.). s Foreign Objects Potential for operator Injury resulting from contact with foreign objects (e.g. dust etc). Ensure suitable eye protection is worn during operation. Never point in the direction of another person.

7 s ise exposure to a work environment where the sound pressure level may be above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe. Fluid lines Hoses & connections Hoses and fittings in good condition. (Hoses not perished and no visible leaks)

8 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 3 Gap Bed Centre Lathe Yamazaki Model: S/N: Other: te: Buyer or buyers representative will be required to provide a completed Safe Work Method Statement for decommission and removal of the asset prior to works commencing. This along with your Workers Compensation & Public Liability Insurance Certificates will be required and reviewed prior to any works taking place onsite. Ensure weight of plant is checked and able to be safely transported onto trucks. Forklifts/cranes should have a SWL within confirmed weight range. Empty any stored consumables prior to transport. Screws, clamps and components may work loose during transport and mounting. Check all screws, clamps and components carefully prior to operation. Ensure a JSA is completed for safe transport, commissioning, setup and operation. Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Access to controls controls located so they can be readily and conveniently operated Control switches are located below knee level and would be difficult to reach.

9 Labelled controls identified so as to indicate their nature, function and direction of operation Red / Green off /On control switches Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. ESB Fitted Foot bar Foot bar brake operation Accessories Tailstock and all vice / clamps are sturdy, in good condition and adjustable Hoses, taps & connections Hoses and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Light Light available for good visibility of work area Spindle and Chuck Good condition, no cracks and securely attached Stability Stable and secure base Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Rear drive belts are not guarded, exposing belts and rotating parts. Partial Hot Surfaces Guarding prevents access to hot surfaces Ensure any hot surfaces are allowed to cool before any tooling change overs Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Rotating spindles not guarded, potential entanglement Chuck is not fitted with cover guarding. Tail stock feed through area not guarded. Access to live power prevented Cabinets locked and other access to live power prevented Partial Connections Leads in good condition no nicks and fastened securely at ends. Hardwired 3 phase power has been electrically disconnected.

10 Isolation Isolation switch fitted at power source On main power switch. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Competent s (installation and maintenance) Only a qualified electrical contractor who is familiar with this equipment and components, including all controls, should perform the installation and startup and maintenance of the system. s Potential for electrocution of operator or electrical fire. Ensure plant is inspected and maintained as per ASINZS 3760 or ASINZS3012: In-service safety inspection and testing of electrical equipment and ASINZS Wiring rules. s Entanglement Potential for operator to become entangled in moving parts of plant. Ensure all precautions are taken to eliminate hazard including guarding in-running nip points and where possible isolation of persons from work area or hazard. Ensure no jewellery or loose clothing is worn and long hair tied back during operation. Erect warning signage and provide training in safe use. s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

11 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 4 Milling Machine Cincinnati Model: S/N: Other: 6J1V5E-456 te: Buyer or buyers representative will be required to provide a completed Safe Work Method Statement for decommission and removal of the asset prior to works commencing. This along with your Workers Compensation & Public Liability Insurance Certificates will be required and reviewed prior to any works taking place onsite. Ensure weight of plant is checked and able to be safely transported onto trucks. Forklifts/cranes should have a SWL within confirmed weight range. Empty any stored consumables prior to transport. Screws, clamps and components may work loose during transport and mounting. Check all screws, clamps and components carefully prior to operation. Ensure a JSA is completed for safe transport, commissioning, setup and operation. Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Procedure displayed Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate warnings displayed. specific safety hazard warnings. Access to controls controls located so they can be readily and conveniently operated

12 Labelled controls identified so as to indicate their nature, function and direction of operation Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. Emergency Stop Button is not compliant. t labelled and no yellow collar. Headstock & Spindle Good condition, no chips or cracks and securely attached Light Light in situ for better visibility of work task light fitted Stability Stable and secure base Worktable Worktable is sturdy and no evidence of over drilling Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Perspex impact guard installed. t interlocked. Moving components can still be accessed by reaching over and around this guard. Hydraulics Hoses & connections Hydraulic hoses and fittings in good condition. (Hoses not perished and no visible leaks) Access to live power prevented Cabinets locked and other access to live power prevented Connections Leads in good condition no nicks and fastened securely at ends. 3 phase electrical power Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

13 s Potential for electrocution of operator or electrical fire. Ensure plant is inspected and maintained as per ASINZS 3760 or ASINZS3012: In-service safety inspection and testing of electrical equipment and ASINZS Wiring rules. s Entanglement Potential for operator to become entangled in moving parts of plant. Ensure all precautions are taken to eliminate hazard including guarding in-running nip points and where possible isolation of persons from work area or hazard. Ensure no jewellery or loose clothing is worn and long hair tied back during operation. Erect warning signage and provide training in safe use. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

14 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 5 Motorised Mill Drill Hafco Metalmaster Model PD26 S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Hearing and eye protection signage displayed Access to controls controls located so they can be readily and conveniently operated Labelled controls identified so as to indicate their nature, function and direction of operation

15 Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. Emergency Stop Button fitted. Headstock & Spindle Good condition, no chips or cracks and securely attached Hoses, taps & connections All hoses and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Light Light in situ for better visibility of work task Stability Stable and secure base Worktable Worktable is sturdy and no evidence of over drilling Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Moving parts exposed, potential entanglement in rotating chuck. Access to live power prevented Cabinets locked and other access to live power prevented Connections Leads in good condition no nicks and fastened securely at ends. Isolation Isolation switch fitted at power source Switch fitted Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

16 s Potential for electrocution of operator or electrical fire. Ensure plant is inspected and maintained as per ASINZS 3760 or ASINZS3012: In-service safety inspection and testing of electrical equipment and ASINZS Wiring rules. s Entanglement Potential for operator to become entangled in moving parts of plant. Ensure all precautions are taken to eliminate hazard including guarding in-running nip points and where possible isolation of persons from work area or hazard. Ensure no jewellery or loose clothing is worn and long hair tied back during operation. Erect warning signage and provide training in safe use. s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling. Swarf collection awkward - workers have to stoop / bend to clean up offcuts and empty the collection tray s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

17 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 6 Motorised Punch and Shear Cropper Kingsland 55XS S/N: Other: Ensure weight of plant is checked and able to be safely transported onto trucks. Forklifts/cranes should have a SWL within confirmed weight range. Empty any stored consumables prior to transport. Screws, clamps and components may work loose during transport and mounting. Check all screws, clamps and components carefully prior to operation. Ensure a JSA is completed for safe transport, commissioning, setup and operation. Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate hazard warnings displayed. Access to controls controls located so they can be readily and conveniently operated Labelled controls identified so as to indicate their nature, function and direction of operation On / Off control buttons.

18 Partial Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. t ESB Foot Pedal Hooded foot pedal to prevent inadvertent operation Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Unable to Verify Interlocking An interlock guard is connected to the plant s operational controls so that the plant is prevented from operating until the guard is closed. The guard cannot be opened or removed until the moving parts of the machine have fully come to rest. Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Both operations are not guarded adequately. Punch area has no guard in place, whilst the cropper has a barrier guard that is not fixed in position or interlocked any any way. Unable to Verify Air / Pneumatics Hoses, taps & connections Air hose and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Contained within equipment housing Unable to Verify Hydraulics Hoses & connections Hydraulic hoses and fittings in good condition. (Hoses not perished and no visible leaks) Contained within equipment housing Unable to Verify Access to live power prevented components enclosed and/or other access to live power prevented. Connections Leads in good condition no nicks and fastened securely at ends. 3 phase power supply Isolation Isolation switch fitted at power source isolation switch Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 Test and tag label has expired.

19 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Crushing Hazard Potential for crush-related injuries to operator resulting from being caught between two items of plant, or from unstable / unsecured plant falling on operator. Ensure all precautions are taken to eliminate crushing hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.) and that plant is stable and secure on the ground or suitable bench surface. s ise exposure to a work environment where the sound pressure level may be above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection. s Transport Ensure weight of plant is checked and able to be safely transported onto trucks. Forklifts/cranes should have a SWL within confirmed weight range. Empty any stored consumables prior to transport. Screws, clamps and components may work loose during transport and mounting. Check all screws, clamps and components carefully prior to operation. Ensure a JSA is completed for safe transport, commissioning, setup and operation. s Transport Anchor points fitted for hook up during transportation. Anchor shackle attached

20 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 7 Bending Roller (Vertical) Tauring Alpha 50H2 S/N: 596 Other: te: motor sitting inside frame not connected Ensure weight of plant is checked and able to be safely transported onto trucks. Forklifts/cranes should have a SWL within confirmed weight range. Empty any stored consumables prior to transport. Screws, clamps and components may work loose during transport and mounting. Check all screws, clamps and components carefully prior to operation. Ensure a JSA is completed for safe transport, commissioning, setup and operation. Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate hazard warnings displayed Partial Access to controls controls located so they can be readily and conveniently operated Partial Labelled controls identified so as to indicate their nature, function and direction of operation

21 Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. Partial Emergency stop Emergency stop located in a position that is easily accessible to the operator Foot plate control Stability Stable and secure base Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Keep hands clear of roller pinch points. Place warning signage near rollers. Access to live power prevented components enclosed and/or other access to live power prevented. Connections Leads in good condition no nicks and fastened securely at ends. Isolation Isolation switch fitted at power source Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 test and tag label. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Crushing Hazard Potential for crush-related injuries to operator resulting from being caught between two items of plant, or from unstable / unsecured plant falling on operator. Ensure all precautions are taken to eliminate crushing hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.) and that plant is stable and secure on the ground or suitable bench surface.

22 s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection. s Potential for electrocution of operator or electrical fire. Ensure plant is inspected and maintained as per ASINZS 3760 or ASINZS3012: In-service safety inspection and testing of electrical equipment and ASINZS Wiring rules. s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

23 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 8 Horizontal Band Saw Hafco BS-9 S/N: J Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Partial Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage relevant to the communication of hazards during operation and maintenance is prominently displayed and adequate. Partial Labelled controls identified so as to indicate their nature, function and direction of operation Some legends are worn.

24 Emergency Stop The emergency stop control is prominent, clearly and durably marked and immediately accessible to each operator of the plant. Any handle, bar or push button associated with the stop control are coloured red. The stop control cannot be adversely affected by electrical or electronic circuit malfunction. Partial Fluid lines Fluid hoses and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Metal band In good, serviceable, working condition and securely attached Stability Stable and secure base Mobile Base - more secure bolted to ground Partial Motor and Drivetrain Suitably guarded to prevent access to motor and associated drive train Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Access is possible around the blade and cutting areas. Access to live power prevented components enclosed and/or other access to live power prevented. Connections Leads in good condition no nicks and fastened securely at ends. Three Phase 415V Secure Plug-in Isolation Isolation switch fitted at power source Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

25 s Cutting Hazard Potential for operator to sustain cuts from moving parts of plant. Ensure all precautions are taken to eliminate hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.). s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling. s ise exposure to a work environment where the sound pressure level is above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. Including requiring operators to wear appropriate hearing protection. ise level assessments required as part of recommissioning. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

26 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 9 Vertical Band Saw Unknown Model: S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage relevant to the communication of hazards during operation and maintenance is prominently displayed and adequate Labelled controls identified so as to indicate their nature, function and direction of operation on / off labelled Blade / Grinder / Polisher / Sanding belt In good, serviceable, working condition and securely attached Stability Stable and secure base Will need to be secured in place when relocated. Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts n-oem motor and drive train guard - improvised after market

27 Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Access is possible around the blade and cutting areas. Partial Connections Leads in good condition no nicks and fastened securely at ends. Current leakage Residual Current Device fitted at power source and tested in line with AS3760 Required when recommissioning plant. Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Cutting Hazard Potential for operator to sustain cuts from moving parts of plant. Ensure all precautions are taken to eliminate hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.). s Foreign Objects Potential for operator Injury resulting from contact with foreign objects (e.g. dust etc). Ensure suitable eye protection is worn during operation. s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling. s ise exposure to a work environment where the sound pressure level is above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. Including requiring operators to wear appropriate hearing protection.

28 s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

29 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 10 Cold Cut Saw Ravinic TRS315 S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Access to controls controls located so they can be readily and conveniently operated Labelled controls identified so as to indicate their nature, function and direction of operation

30 Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. Stability Stable and secure base Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Telescopic blade guard. Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Ensure all moving parts are guarded to prevent inadvertent access to moving parts (as far as is reasonably practical). Unable to Verify Connections Leads in good condition no nicks and fastened securely at ends. Isolation Isolation switch fitted at power source Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Cutting Hazard Potential for operator to sustain cuts from moving parts of plant. Ensure all precautions are taken to eliminate hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.). s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling.

31 s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe. Unable to Verify Fluid lines Hoses & connections Hoses and fittings in good condition. (Hoses not perished and no visible leaks)

32 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 11 Under Bed Table Saw Hafco Woodmaster SB-12 S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Partial Warning Signage Hazard warning signage/stickers that communicate specific hazards during operation and maintenance, are prominently displayed and adequate Damaged Warning Sticker Access to controls controls located so they can be readily and conveniently operated Labelled controls identified so as to indicate their nature, function and direction of operation Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts

33 Partial Saw blade Guarded to prevent personal contact with moving blade pre AS : 2001 Riving knife fitted and suitably size and located. Access to saw blade is possible. Safety Devices Emergency Stop Button Mushroom Head Emergency Stop Button that complies with AS fitted (red button, yellow collar) Air / Pneumatics Hoses, taps & connections Air hose and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Access to live power prevented components enclosed and/or other access to live power prevented. Connections Leads and connections in good condition no nicks and fastened securely at ends. Power Isolation Isolation switch fitted Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s ise exposure to a work environment where the sound pressure level is above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection. s Respirable Dust Dust extraction fitted in such a manner that it draws respirable dust away from the operators breathing zone Stability Stable base Designed to be stable when unloaded and when in operation. obvious damage that compromises stability

34 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 12 Manual Sheet Metal Roller Hafco Manual Model: S/N: Other: te: Use of the trolley as a base is high risk and permanent fixation to ground/floor is recommended Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Warning Signage Ensure hazard warning signage/stickers that communicate specific hazards during operation and maintenance are prominently displayed and adequate. Stability Secured from unintentional movement. Will require fixation to ground on re-location Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

35 s Crushing Hazard Potential for crush-related injuries to operator resulting from being caught between two items of plant, or from unstable / unsecured plant falling on operator. Ensure all precautions are taken to eliminate crushing hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.) and that plant is stable and secure on the ground. s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling.

36 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 13 Pedestal Drill Hafco Metal Master GHD-22 S/N: A17566 Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Partial Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Access to controls controls located so they can be readily and conveniently operated Labelled controls identified so as to indicate their nature, function and direction of operation

37 Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background. Stability Stable and secure base Will need to be secured to the floor before use. Motor and Drivetrain Suitably guarded to prevent access to motor and associated drive train Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Potential for entanglement - no chuck guard Unable to Verify Connections Leads in good condition no nicks and fastened securely at ends. Unable to Verify Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection. s Entanglement Potential for operator clothing to become entangled in moving parts of plant. Ensure no jewellery or loose clothing is worn and long hair tied back during operation. Erect warning signage and provide training in safe use. s Foreign Objects Potential for operator Injury resulting from contact with foreign objects (e.g. dust etc). Ensure suitable eye protection is worn during operation.

38 s ise exposure to a work environment where the sound pressure level may be above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection.

39 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 14 30T Workshop Press Unknown 30T S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Data plate detailing plant operating specifications and tolerances present and legible. SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage relevant to the communication of hazards during operation and maintenance is prominently displayed and adequate Written warning signage attached Pins & Connections Pins, bushes, bolts, screws and other fasteners in place, free of other than minor surface rust and securely attached. Stability Stable and secure base

40 Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 guarding around perimeter of press to prevent access to crushing points, unstable objects under load or press operation Air / Pneumatics Pressure gauge Pressure regulator with gauge fitted. Gauge is in good condition, clear and easy to read. Hydraulics Hoses & connections Hydraulic hoses and fittings in good condition. (Hoses not perished and no visible leaks) Manually operated system s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. Recommended. s Crushing Hazard Potential for crush-related injuries to operator resulting from being caught between two items of plant. Ensure all precautions are taken to eliminate crushing hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc). s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling.

41 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 15 Drill Press Hafco BD20 S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Partial Labelled controls identified so as to indicate their nature, function and direction of operation On / Off control Switch Emergency Stop Emergency stop button in place and compliant with AS4024 and AS1543. ESB is mushroom type (not recessed) push button which can be activated by the palm. ESB is red colour with yellow background.

42 Stability Stable and secure base Will need to be secured in place prior to recommissioning. Motor and Drivetrain Suitably guarded to prevent access to motor and associated drive train Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 There no chuck guard. Partial Connections Leads in good condition no nicks and fastened securely at ends. Only fair -to be checked as part of the Test and Tag program. Unable to Verify Current leakage Residual Current Device fitted at RCD coverage to be power source and tested in line confirmed by an electrician with AS3760 during re-commissioning. Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection. s Entanglement Potential for operator clothing to become entangled in moving parts of plant. Ensure no jewellery or loose clothing is worn and long hair tied back during operation. Erect warning signage and provide training in safe use. s Foreign Objects Potential for operator Injury resulting from contact with foreign objects (e.g. dust etc). Ensure suitable eye protection is worn during operation. s ise exposure to a work environment where the sound pressure level may be above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection. ise level assessments recommended as part of recommissioning.

43 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 16 Double Ended Bench Grinder, Polisher and Linisher Unknown Unknown S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Unable to Verify Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer Difficult to read. Warning Signage Hazard warning signage relevant to the communication of hazards during operation and maintenance is prominently displayed and adequate Required. Labelled controls identified so as to indicate their nature, function and direction of operation Only one rocker switch for on and off - not labelled. Blade / Grinder / Polisher / Sanding belt In good, serviceable, working condition and securely attached Stability Stable and secure base Pedestal Base Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts

44 Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Grinding wheels are partially enclosed but there are no perspex eye guards in place. Moving parts still accessible. Connections Leads and hoses in good condition no nicks and fastened securely at ends. Should be assessed as part of the Test and Tagging and visually inspected before each use. Unable to Verify Current leakage Residual Current Device fitted at power source and tested in line with AS3760 Always use in conjunction with an RCD - GPO RCD protection to be confirmed by an electrician. If unsure always use a portable RCD. Power Lead Testing and tagging has been completed in compliance with AS: 3760 or AS3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Entanglement Potential for operator to become entangled in moving parts of plant. Ensure all precautions are taken to eliminate hazard including guarding in-running nip points and where possible isolation of persons from work area or hazard. Ensure no jewellery or loose clothing is worn and long hair tied back during operation. Erect warning signage and provide training in safe use. s Foreign Objects Potential for operator Injury resulting from contact with foreign objects (e.g. dust etc). Ensure suitable eye protection is worn during operation. s ise exposure to a work environment where the sound pressure level is above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection.

45 s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

46 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 17 Double Ended Bench Grinder. Skil 200mm S/N: Other: te: Double Ended Bench Grinder on Pedestal Base, approx 130mm (Dia) wheels, 240v Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer Warning Signage Hazard warning signage relevant to the communication of hazards during operation and maintenance is prominently displayed and adequate Labelled controls identified so as to indicate their nature, function and direction of operation Only one red rocker switch for on and off - not labelled. Grinding Wheels and Workpiece Rest In good, serviceable, working condition and securely attached Lighting Task lighting fitted and operational Stability Stable and secure base On re-location needs to be secured to floor Partial

47 Motor and Drivetrain Suitably guarded to prevent access to motor and associated drive train Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Grinding wheels are partially enclosed. Moving parts still accessible. Connections Leads and hoses in good condition no nicks and fastened securely at ends. Aged and signs of deterioration Current leakage Residual Current Device fitted at power source and tested in line with AS3760 Power Lead Testing and tagging has been completed in compliance with AS: 3760 or AS3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Entanglement Potential for operator to become entangled in moving parts of plant. Ensure all precautions are taken to eliminate hazard including guarding in-running nip points and where possible isolation of persons from work area or hazard. Ensure no jewellery or loose clothing is worn and long hair tied back during operation. Erect warning signage and provide training in safe use. s Foreign Objects Potential for operator Injury resulting from contact with foreign objects (e.g. dust etc). Ensure suitable eye protection is worn during operation. s ise exposure to a work environment where the sound pressure level is above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection.

48 s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

49 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 18 Duct Lifter Genie Superlift SL-24 S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer Load Rating Metal plate detailing Safe Working Load (SWL) and specific lifting tolerances is legible and fixed to plant by manufacturer 180 kg Log Book Log Book available and up to date Maintenance Evidence of regular servicing SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Operating instructions are displayed

50 Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Access to controls controls located so they can be readily and conveniently operated Labelled controls identified so as to indicate their nature, function and direction of operation Directional controls on winch Lifting mechanism Structure, guides, pulleys, wires and stabiliser bars appear in serviceable condition. Pins & Connections Pins, bolts, screws and other fasteners in place, clear of rust and securely attached. Steering Mechanism and Wheels Whhels, linkages including pins and bushes, and tie rods appear in serviceable condition. Structural support Spreaders, legs, footplates associated mechanisms appear in functional condition Partial Moving Parts Potential for operator entanglement, crushing, cutting, stabbing or striking prevented and moving parts guarded in line with AS4024 Potential pinch points s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Crushing Hazard Potential for crush-related injuries to operator resulting from being caught between two items of plant, or from unstable / unsecured plant falling on operator. Ensure all precautions are taken to eliminate crushing hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.) and that plant is stable and secure on the ground or suitable bench surface.

51 s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe. s Transport Ensure weight of plant is checked and able to be safely transported onto trucks. Forklifts/cranes should have a SWL within confirmed weight range. Empty any stored consumables prior to transport. Screws, clamps and components may work loose during transport and mounting. Check all screws, clamps and components carefully prior to operation. Ensure a JSA is completed for safe transport, commissioning, setup and operation.

52 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 19 Mig Welder Unimig 345 S/N: Other: 415V plug in with handpiece on mobile trolley Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate hazard warning signage Labelled controls identified so as to indicate their nature, function and direction of operation Wheels / Castors Wire feeder Wire feeder fully enclosed, no access to internal

53 Hot Surfaces Guarding prevents access to hot surfaces Air / Pneumatics Hoses, taps & connections Air hose and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Access to live power prevented components enclosed and/or other access to live power prevented. Connections Leads in good condition no nicks and fastened securely at ends. Connections Connection with electrodes in good condition Earthing Suitable earthing clamp or earthing rod for means of connecting exposed metal parts to the ground or preventing electric shock is present and in good condition Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 test and tag labels attached Welding Potential for electrocution of operator. Where possible work should be performed on dry insulated floor. Temporary wooden platforms or rubber mats can be used. should wear appropriate rubber soled work boots. s Burns Potential for Injury to operator and/or damage to plant and equipment resulting from contact with hot surfaces, materials or steam. Ensure all hot surfaces are insulated as far as is reasonably practicable. Hot surfaces should be labelled to warn operators. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

54 s Confined Space Potential for operator to receive an injury (asphyxiation, engulfment, exposure to hazardous substances, entrapment etc.) as a result of working in a confined space. Ensure all confined spaces are labelled, listed on a confined space register, entry is controlled via a work permit system and adequate training provided to those that enter confined spaces. s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe. s Ventillation Elsure welding activities are undertaken outside or in a well ventillated area. If possible fume extraction should be used. s Welding Flash Potential for severe eye injury to operator and bystanders from high UV light. Ensure suitable welding booth / welding curtains errected and appropriate PPE i. e. Welding / face shield compliant with AS1337

55 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 20 Mig Welder Unimig 2521 S/N: Other: Handpiece on mobile trolley. Gas Bottle not included Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Partial Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Ensure Instructions are displayed Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Labelled controls identified so as to indicate their nature, function and direction of operation Unable to Verify Inspection Welder has been inspected in accordance with AS Regulators comply with Australian Standards AS4267 IBEDA Flashback arrestors comply to Australian Standards AS4603

56 Flashback Arrestor Flashback arrestor fitted. Partial Gas Fittings and Connections Gas pipes and associated couplings/connections in good condition ( evidence of loose connections etc). Aged Unable to Verify Wheels / Castors Lockable wheels / castors in place to aid in relocation. Wheels / castors move freely in all directions. Wire feeder Wire feeder fully enclosed, no access to internal Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Hot Surfaces Guarding prevents access to hot surfaces Partial Connections Leads in good condition no nicks and fastened securely at ends. Aged Connections Connection with electrodes in good condition Unable to Verify Earthing Suitable earthing clamp or earthing rod for means of connecting exposed metal parts to the ground or preventing electric shock is present and in good condition Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 Welding Potential for electrocution of operator. Where possible work should be performed on dry insulated floor. Temporary wooden platforms or rubber mats can be used. should wear appropriate rubber soled work boots.

57 s Burns Potential for Injury to operator and/or damage to plant and equipment resulting from contact with hot surfaces, materials or steam. Ensure all hot surfaces are insulated as far as is reasonably practicable. Hot surfaces should be labelled to warn operators. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Confined Space Potential for operator to receive an injury (asphyxiation, engulfment, exposure to hazardous substances, entrapment etc.) as a result of working in a confined space. Ensure all confined spaces are labelled, listed on a confined space register, entry is controlled via a work permit system and adequate training provided to those that enter confined spaces. s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe. s Ventillation Elsure welding activities are undertaken outside or in a well ventillated area. If possible fume extraction should be used. s Welding Flash Potential for severe eye injury to operator and bystanders from high UV light. Ensure suitable welding booth / welding curtains errected and appropriate PPE i. e. Welding / face shield compliant with AS1337

58 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 21 Portable electric tig welder Cigweld Transtig 180 S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Labelled controls identified so as to indicate their nature, function and direction of operation Wheels / Castors/ / Handle Lockable wheels / Castors / Handle in place to aid in relocation. Wheels / castors move freely in all directions. n locking wheels

59 Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Hot Surfaces Guarding prevents access to hot surfaces Air / Pneumatics Hoses, taps & connections Air hose and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Access to live power prevented Cabinets locked and other access to live power prevented Partial Connections Leads in good condition no nicks and fastened securely at ends. Some kinking front selection cable Connections Connection with electrodes in good condition Earthing Suitable earthing clamp or earthing rod for means of connecting exposed metal parts to the ground or preventing electric shock is present and in good condition Earthing clamp attached Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 Welding Potential for electrocution of operator. Where possible work should be performed on dry insulated floor. Temporary wooden platforms or rubber mats can be used. should wear appropriate rubber soled work boots. s Burns Potential for Injury to operator and/or damage to plant and equipment resulting from contact with hot surfaces, materials or steam. Ensure all hot surfaces are insulated as far as is reasonably practicable. Hot surfaces should be labelled to warn operators. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

60 s Confined Space Potential for operator to receive an injury (asphyxiation, engulfment, exposure to hazardous substances, entrapment etc.) as a result of working in a confined space. Ensure all confined spaces are labelled, listed on a confined space register, entry is controlled via a work permit system and adequate training provided to those that enter confined spaces. s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe. s Ventillation Elsure welding activities are undertaken outside or in a well ventillated area. If possible fume extraction should be used. s Welding Flash Potential for severe eye injury to operator and bystanders from high UV light. Ensure suitable welding booth / welding curtains errected and appropriate PPE i. e. Welding / face shield compliant with AS1337

61 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 22 Arc Welder WIA Weldarc 230 S/N: Other: 415v plug in with handpiece on mobile trolley Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate hazard warning displayed Labelled controls identified so as to indicate their nature, function and direction of operation Wheels / Castors Lockable wheels / castors in place to aid in relocation. Wheels / castors move freely in all directions.

62 Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Hot Surfaces Guarding prevents access to hot surfaces Connections Leads in good condition no nicks and fastened securely at ends. Aged with integrity unable to be verified Unable to Verify Connections Connection with electrodes in good condition Unable to Verify Earthing Suitable earthing clamp or earthing rod for means of connecting exposed metal parts to the ground or preventing electric shock is present and in good condition Unable to Verify Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 Welding Potential for electrocution of operator. Where possible work should be performed on dry insulated floor. Temporary wooden platforms or rubber mats can be used. should wear appropriate rubber soled work boots. s Burns Potential for Injury to operator and/or damage to plant and equipment resulting from contact with hot surfaces, materials or steam. Ensure all hot surfaces are insulated as far as is reasonably practicable. Hot surfaces should be labelled to warn operators. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

63 s Confined Space Potential for operator to receive an injury (asphyxiation, engulfment, exposure to hazardous substances, entrapment etc.) as a result of working in a confined space. Ensure all confined spaces are labelled, listed on a confined space register, entry is controlled via a work permit system and adequate training provided to those that enter confined spaces. s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe. s Ventillation Elsure welding activities are undertaken outside or in a well ventillated area. If possible fume extraction should be used. s Welding Flash Potential for severe eye injury to operator and bystanders from high UV light. Ensure suitable welding booth / welding curtains errected and appropriate PPE i. e. Welding / face shield compliant with AS1337

64 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 23 Portable electric tig welder Cigweld 170HF S/N: Other: In case with torch and lead (no earth lead) Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions provided to operator detailing pre-start, operation and clean-up procedure as well as appropriate PPE to wear whilst operating Operational Instructions displayed Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Hazard warnings displayed Labelled controls identified so as to indicate their nature, function and direction of operation Wheels / Castors/ / Handle Lockable wheels / Castors / Handle in place to aid in relocation. Wheels / castors move freely in all directions. n locking wheels

65 Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Hot Surfaces Guarding prevents access to hot surfaces Air / Pneumatics Hoses, taps & connections Air hose and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Partial Connections Leads in good condition no nicks and fastened securely at ends. Earth Lead Connections Connection with electrodes in good condition Earthing Suitable earthing clamp or earthing rod for means of connecting exposed metal parts to the ground or preventing electric shock is present and in good condition Earthing clamp attached Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 Test and tag labels attached Expired Welding Potential for electrocution of operator. Where possible work should be performed on dry insulated floor. Temporary wooden platforms or rubber mats can be used. should wear appropriate rubber soled work boots. s Burns Potential for Injury to operator and/or damage to plant and equipment resulting from contact with hot surfaces, materials or steam. Ensure all hot surfaces are insulated as far as is reasonably practicable. Hot surfaces should be labelled to warn operators. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

66 s Confined Space Potential for operator to receive an injury (asphyxiation, engulfment, exposure to hazardous substances, entrapment etc.) as a result of working in a confined space. Ensure all confined spaces are labelled, listed on a confined space register, entry is controlled via a work permit system and adequate training provided to those that enter confined spaces. s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe. s Ventillation Elsure welding activities are undertaken outside or in a well ventillated area. If possible fume extraction should be used. s Welding Flash Potential for severe eye injury to operator and bystanders from high UV light. Ensure suitable welding booth / welding curtains errected and appropriate PPE i. e. Welding / face shield compliant with AS1337

67 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 24 Oxy Acetylene Welder t Branded Portable S/N: Other: Oxy-Acetylene Set comprising 2 wheel 2 bottle trolley with pneumatic wheels, cutting torch with leads and gauges Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate Hose Colour Colour coding of hoses and threads comply with AS1335. Oxygen and LPG easily identifiable. Flashback arrestors Flashback arrestors fitted between the outlet of the regulator and of the hose Fuel System Integrity Gas bottles secured to trolley to aid with relocation s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

68 s Fire or Explosion Do not store flammable liquids, vapours or combustible materials in vicinity of plant or during such activities as re-fuelling. Observe all precautions in ensuring ignition sources do not come into contact with flammable liquids, vapours or combustible materials to prevent fire or explosion. s Gas Fittings Potential for Injury to operator and/or damage to plant and equipment resulting from contact with hot surfaces, materials or steam. Ensure all hot surfaces are insulated as far as is reasonably practicable. Hot surfaces should be labelled to warn operators. s Hoses, taps & connections Gas hose and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Gas Connections Hoses in good condition no nicks and fastened securely at ends. Gas Gauges Gas gauges in situ. Clear and easy to read

69 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 25 Air Compressor Atlas Copco LE 9 S/N: AMI Other: 2 cylinder belt driven by 7.5KW Leroy Somer 3 phase electric motor, 10 Bar max pressure, mounted on Horizontal Air Receiver tank Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer Maintenance Log Book inspection and maintenance records available and up to date Maintenance safety instructions displayed. records SOI / SOP Instructions sticker affixed and legible. safety instructions displayed. Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate specific safety hazard warnings displayed. Labelled controls identified so as to indicate their nature, function and direction of operation Off / On buttons identified. Emergency Stop Emergency stop located in a position that is easily accessible to the operator

70 Drain valve Water drain release valve present Wheels / Castors Lockable wheels / castors in place to aid in relocation. Wheels / castors move freely in all directions. Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Hot Surfaces Guarding prevents access to hot surfaces Hot surface manifolds are exposed. Unable to Verify Air / Pneumatics Air receiver Air receiver within 10 year test period To be confirmed before use. Air / Pneumatics Hoses, taps & connections Air hose and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Air / Pneumatics Pressure gauge Pressure regulator with gauge fitted. Gauge is in good condition, clear and easy to read. Air / Pneumatics Pressure release valve Pressure release valve fitted and undamaged Partial Connections Leads in good condition no nicks and fastened securely at ends. 415v for hardwire (disconnected) Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Plant to be used in conjunction with earth leakage circuit breaker (safety switch) and overload protection.

71 s ise exposure to a work environment where the sound pressure level is above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection. Currently located inside the workshop with no noise suppression. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

72 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 113 Air Compressor GMC 240V Direct Drive S/N: Other: With bin of assorted hoses Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer SOI / SOP Instructions sticker affixed and legible. Warning Signage Hazard warning signage/stickers communicate specific hazards during operation and maintenance, are prominently displayed and adequate safety hazard warnings displayed Labelled controls identified so as to indicate their nature, function and direction of operation ON / OFF switch Drain valve Water drain release valve present Stability Stable and secure base

73 Engine/ Motors/ Drivetrain Suitably guarded to prevent access to engines, motors and associated drive trains and belts Hot Surfaces Guarding prevents access to hot surfaces guarding on manifold areas Air / Pneumatics Hoses, taps & connections Air hose and associated couplings and connections in good condition. ( evidence of cracks in hose or loose connections) Air / Pneumatics Pressure gauge Pressure regulator with gauge fitted. Gauge is in good condition, clear and easy to read. Air / Pneumatics Pressure release valve Pressure release valve fitted and undamaged Connections Leads in good condition no nicks and fastened securely at ends. Power Lead Testing and tagging has been completed in compliance with AS3760 or AS: 3012 s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Potential for electrocution of operator or electrical fire. Ensure plant is inspected and maintained as per ASINZS 3760 or ASINZS3012: In-service safety inspection and testing of electrical equipment and ASINZS Wiring rules. s ise exposure to a work environment where the sound pressure level is above the noise exposure standard. Ensure controls are implemented to reduce the level of noise in the workplace. s required to wear appropriate hearing protection.

74 s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

75 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 137 Forklift Jib Attachment Unbranded Model: S/N: Other: te: SWL indicated Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer Warning Signage Hazard warning signage/stickers that communicate specific hazards during operation and maintenance, are prominently displayed and adequate Pins & Connections Pins, bushes, bolts, screws and other fasteners in place, free of other than minor surface rust and securely attached. Stability Stable and secure base s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance.

76 s Crushing Hazard Potential for crush-related injuries to operator resulting from being caught between two items of plant, or from unstable / unsecured plant falling on operator. Ensure all precautions are taken to eliminate crushing hazard (i.e. guarding, isolation of persons from work area during operations, warning signage, training etc.) and that plant is stable and secure on the ground or suitable bench surface. s Pre-Operation Checks Ensure pre-operation safety checks (buttons, switches, controls, warning devices and consumables etc.) completed by operator at the start of each shift. Ensure all faults recorded and plant removed from use if unsafe.

77 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Model: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments 138 Pallet Jack Pilot 20L Manual Hydraulic S/N: Other: Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Data Plate Metal plate detailing operating specifications and tolerances is legible and fixed to plant by manufacturer t sighted. Load Rating Lift capacity and SWL clearly and easily identifiable to operator Varies depending on the jack Access to controls controls located so they can be readily and conveniently operated Manual Operation Labelled controls identified so as to indicate their nature, function and direction of operation Pins & Connections Pins, bushes, bolts, screws and other fasteners in place, free of other than minor surface rust and securely attached. Wheels / Castors Lockable wheels / castors in place to aid in relocation. Wheels / castors move freely in all directions. Solid wheels. Clean regularly.

78 Hydraulics Hyrauliic rams / cylinders visible oil leaks or damage. In operational condition. s Competent s Ensure only skilled and competent personnel have access to plant for operation or maintenance. s Manual Handling Potential for injury to operator from repetitive, sustained or high force movements. Ensure a manual handling risk assessment is completed to identify if tasks completed in conjunction with this item of plant contain a component of hazardous manual handling.

79 PLANT HAZARD REPORT Job: Lot : Location: Plant Description: Make: Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments Ladders & Platforms Multiple Model: S/N: Other: Platform step ladder, Tormax, fibreglass, 6ft, single sided Step ladder, Bailey, aluminium 5ft, 120kg, double sided Step ladder, Bailey, fibreglass, 7ft/12ft Step ladder, Bailey, aluminium, 150kg, 12ft, single sided Platform step ladder, Toole, fibreglass, 150kg, single sided Step ladder, Bailey, aluminium, 6ft, 120kg, double sided Step ladder, Bailey, aluminium, 4ft, 120kg, double sided Step ladder, Bailey, aluminium, 4ft, 120kg, double sided Platform step ladder, Gorilla, fibreglass, 8ft, single sided Operations Manual or SWP Available? Maintenance Available? Inspection Date 5/12/2017 PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser dismantling, transporting and commissioning plant for their own intended purposes. It is recommended that the purchaser of this plant conducts a hazard identification and risk assessment and refers to the attached plant information which has been provided to assist the purchaser in ensuring that the plant is safe (i.e. make the necessary modifications or otherwise eliminate or control so far as practicable all risks associated with the use of the plant) and only used for the purposes for which the plant was originally designed. Status Advice Element Aspect Plant Comments Partial Data Plate Safe Work Operating specifications and tolerances are legible and fixed to plant by manufacturer Absent on some Unable to Verify s Ladder Compliance The ladders & platforms conform to AS Portable Ladders One Wooden Ladder and two Wooden Trestles should not be sold for use (see photos). s Falls & Work atvheight Potential for Injury as a result of falling from one level to another level. Ensure work at heights / fall risks are eliminated or controlled so far as is reasonably practicable.

80 PLANT HAZARD REPORT DECLARATION The attached reports or Plant Safety information* has been prepared for the plant** item/s to be supplied in accordance with the requirements of Work Health and Safety (WHS/OHS) Legislation. PLANT SAFETY DOCUMENTATION REFERENCE Byrnes Entrance Technology (In Liquidation) - WHS & Plant Hazard Assessments RECEIPT OF PLANT SAFETY DOCUMENTATION: Signed by Vendor (or Agent): YES / NO Signed by Purchaser or Person/s Taking Receipt of Plant: Name Name: Company: Company: Signature: Signature: Date: Date: A supplier of used plant has a requirement under State and Commonwealth WHS legislation to provide safety information to purchasers. The attached reports are provided in compliance with this requirement. Your signature above acknowledges receipt. As purchaser, you are reminded of your obligations as an operator of plant under the respective State based WHS legislation to complete your own plant risk assessments for the dismantling, transport, installation, commissioning and operation for the plant item/s to be supplied. *Plant safety information Plant items inspected are not always operational at the time of our examination. Arthur J Gallagher has completed the plant hazard report/s to assist the purchaser or operator in identifying hazards associated with the plant prior to dismantling, transporting and commissioning plant for their own intended purposes. Arthur J Gallagher recommend that the purchaser or operator of this plant conducts their own risk assessment and refers to the attached plant hazard report/s which has been provided to assist the purchaser or operator in ensuring that the plant is safe and only used for the purposes for which it was originally designed. ** Plant as defined by the respective State or Commonwealth WHS legislation

PLANT HAZARD REPORT. Plant Description: Element Aspect Plant Hazards and Controls Advice. Circular Saw

PLANT HAZARD REPORT. Plant Description: Element Aspect Plant Hazards and Controls Advice. Circular Saw PLANT HAZARD REPORT Plant Description: Circular Saw PLEASE NOTE This plant information has been prepared to assist the purchaser in identifying hazards associated with the plant prior to the purchaser

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-08001-011 : Harrison 550 CNC Lathe Large Sale Type For what use is this asset being sold? Re-Use þ Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-09100-060 : Gantry hoist system Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other use is at the

More information

PLANT/EQUIPMENT/ASSET HAZARD REPORT

PLANT/EQUIPMENT/ASSET HAZARD REPORT Asset Description: EL-0001-003 - Overhead Transfer System and EMS. Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other

More information

Hazards Requiring Attention: AS AT Friday, 29 January Next Review Saturday, 28 January Total Hazards Recorded 39. Critical Risk Hazards 0

Hazards Requiring Attention: AS AT Friday, 29 January Next Review Saturday, 28 January Total Hazards Recorded 39. Critical Risk Hazards 0 EF26 Risk Assessment CAT Excavator Hazards Requiring Attention: AS AT Friday, 29 January 2016 0 Next Review Saturday, 28 January 2017 Total Hazards Recorded 39 Critical Risk Hazards 0 High Risk Hazards

More information

Hazards Requiring Attention: AS AT Friday, 1 April Next Review Saturday, 1 April Total Hazards Recorded 43. Critical Risk Hazards 0

Hazards Requiring Attention: AS AT Friday, 1 April Next Review Saturday, 1 April Total Hazards Recorded 43. Critical Risk Hazards 0 EF26 Risk Assessment Kubota U35-4 s Requiring Attention: AS AT Friday, 1 April 2016 0 Next Review Saturday, 1 April 2017 Total s Recorded 43 Critical Risk s 0 High Risk s 0 Moderate Risk s 10 Low Risk

More information

Control of Energy - Isolation Process

Control of Energy - Isolation Process Issue Date: 24/03/17 Last Reviewed: 24/03/17 Next Review Date: 24/03/18 Authorised By: Mike Muir Safe Operating Procedure Control of Energy - Isolation Process Purpose: This SOP is based on a Generic 12-step

More information

Surface exploration drilling

Surface exploration drilling Checklist Surface exploration drilling This checklist is intended to assist employers to identify common hazards and manage risks associated with surface exploration drilling. June 2017 Background In surface

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed

More information

HORIZONTAL BEAM AND VERTICAL PANEL SAWS

HORIZONTAL BEAM AND VERTICAL PANEL SAWS FACT SHEET HORIZONTAL BEAM AND VERTICAL PANEL SAWS HORIZONTAL BEAM PANEL SAW Horizontal beam panel saws are used to cut panels into pieces and it can cut multiple panels at the same time. Multiple panels

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Current Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed in safe operation of each tool/machine.

More information

TRADE AREA: ELECTRICAL INDUSTRY

TRADE AREA: ELECTRICAL INDUSTRY TRADE AREA: ELECTRICAL INDUSTRY Some possible workplace hazards and possible ways for Host employers and Apprentices/Trainees in controlling these hazards. What are possible hazards? What could be possible

More information

SAFE WORK METHOD STATEMENT Part B

SAFE WORK METHOD STATEMENT Part B SAFE WORK METHOD STATEMENT Part B SWMS No.: 01 WORK ACTIVITY DESCRIPTION: Door Installation All FORESEEABLE OHS & ENVIRONMENTAL HAZARDS & RISKS ASSOSSIATED WITH THE WORKS MUST BE ASSESSED & ALLOCATED CONTROLS

More information

Suitability of Work Equipment

Suitability of Work Equipment These regulations came into effect on the 5th December 1998 and replace PUWER 1992. They cover almost all equipment used at work, including tool box tools such as hammers, knives etc. They also cover machinery

More information

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010) (Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:

More information

PART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT)

PART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT) PART Q CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT) WAC Page 296-307-320 Control of hazardous energy (lockout-tagout). 1 296-307-32001 What does this section cover? 1 296-307-32003 When does this section

More information

responsible present? Y/N (When all controls are in place risk will be reduced). Extension tables are used when cutting large sheet materials

responsible present? Y/N (When all controls are in place risk will be reduced). Extension tables are used when cutting large sheet materials Technologies - No.54 Woodworking Bench Circular Saw (List additional hazards, risks and s particular to your school using the blank template no.69) azards Is the What is the Risk rating Controls Is this

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

RISK ASSESSMENT. Bobcat Skid Steer Loader. Series F & G (incl. S Models) For. SSL Version 2

RISK ASSESSMENT. Bobcat Skid Steer Loader. Series F & G (incl. S Models) For. SSL Version 2 PO Box 50, Hornsby, NSW 2077 Phone: 1800 643 853 Web: www.bobcat.com.au RISK ASSESSMENT For Bobcat Skid Steer Loader Series F & G (incl. S Models) CONTENTS Applicability Standards referenced in the preparation

More information

OSHA Office of Training and Education 2

OSHA Office of Training and Education 2 The Occupational Safety and Health Administration aims to ensure employee safety and health in the United States by working with employers and employees to create better working environments. Since its

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Form Tool & Machine Work General Various (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed in safe operation of each

More information

Tire Inflation Cage Kit For servicing only single piece automotive, and most light truck tire/wheel assemblies

Tire Inflation Cage Kit For servicing only single piece automotive, and most light truck tire/wheel assemblies Tire Inflation Cage Kit 85608214 For servicing only single piece automotive, and most light truck tire/wheel assemblies This is a supplement to your operating manual and covers the setup and use of the

More information

Safe Work Method Statement

Safe Work Method Statement Company Name: Safe Work Method Statement Site Address: Other Details: Contractor: Activity/Trade: Electrician Date: TASKS List the tasks required to perform the activity in sequence carried out. Entry

More information

Static, Hazard & Risk Assessment of Mobile Plant

Static, Hazard & Risk Assessment of Mobile Plant Static, Hazard & Risk Assessment of Mobile Plant Company Name ELITE ROADS Make / Model SAKAI TS160-2 Meter Reading: 477 Multi-Wheel Roller Plant Registration or ID. OU-047 Assessed by GREG CORNELL 03 9763

More information

Control of Hazardous Energy Lockout / Tagout Program

Control of Hazardous Energy Lockout / Tagout Program Control of Hazardous Energy Lockout / Tagout Program August 2016 Table of Contents Purpose... 1 Scope and Application... 1 Responsibilities... 1 Environmental Health and Safety Personnel (EH&S)... 1 Directors

More information

University College Dublin Machinery/Equipment Risk Assessment Template

University College Dublin Machinery/Equipment Risk Assessment Template 1. General Information Name of Person(s) carrying out assessment and their position Principal Investigator / Supervisor / Head of School or Unit (Person responsible for ensuring safety) Date of assessment

More information

Meuangvang Development Co.LTD Standard Working Procedure 058 Use of Hydraulic Torqueing Devices

Meuangvang Development Co.LTD Standard Working Procedure 058 Use of Hydraulic Torqueing Devices 1. Application To provide a standard work procedure for as required in accordance with Meuangvang Development Co Ltd Safety Management Program 2. Revision Schedule Rev # Old Section Ref New Section Ref

More information

Risk Management Resources

Risk Management Resources Risk Management Resources Machine Guarding Name: Notes: Electrical Systems: Fire Prevention Are circuit breakers accessible to personnel, protected from physical damage, and located away from ignitable

More information

1 2 CONTENTS INTRODUCTION Owner Information 4 Warranty Registration 5 Safety Instructions Safety 6 Safety Decals 7 Safety Identification Labels 8 Safety Notice 10 Safety Standards 11 Risk Assessment 13

More information

ISD #535 Rochester Public Schools

ISD #535 Rochester Public Schools ISD #535 Rochester Public Schools Health & Safety Office Maintenance Service Building 10 9½ St SE Rochester, MN 55904 507-328-4507 Management Plan for Machine Guarding Modification Date Document Modification

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT PLAT HAZARD AD EQUIPMET RISK ASSESSMET Plant Identification : HAULOTTE STAR 10 Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or struck

More information

Flexfence Swaging Unit. Product Manual. Release 02/16.

Flexfence Swaging Unit. Product Manual. Release 02/16. Product Manual www.ingalcivil.com.au 1.0 Safety Precautions 1.1 Personal Protection While operating this equipment it is recommended that the following personal protective equipment be worn; Long sleeve

More information

QUEENSLAND UNIVERSITY OF TECHNOLOGY

QUEENSLAND UNIVERSITY OF TECHNOLOGY QUEENSLAND UNIVERSITY OF TECHNOLOGY SITE SPECIFIC SAFETY MANAGEMENT PLAN FOR SAMFORD HOUSE SAMFORD ECOLOGICAL RESEARCH FACILITY SAMFORD VALLEY 2007 Dylan Randall SN: 06305466 dylan.randall@student.qut.edu.au

More information

LO/TO LOCKOUT/TAGOUT PROGRAM

LO/TO LOCKOUT/TAGOUT PROGRAM LO/TO LOCKOUT/TAGOUT PROGRAM April 2017 CONTENTS Section 1: Introduction...1 Section 2: Purpose... 1 Section 3: Application... 1 Section 4: Definitions... 2 Section 5: Roles and Responsibilities... 4 Section

More information

PLANT RISK ASSESSMENT REPORT

PLANT RISK ASSESSMENT REPORT PLANT RISK ASSESSMENT REPORT SECTION 1: PLANT IDENTIFICATION Report Number: 407/752 Assessment Date: 5 th May 2015 Company: Wacker Neuson Plant Type: Telescopic Light Balloon Make: Wacker Neuson Model:

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

Page: 7/15/2009. Energy control procedures Use of lockout/tagout equipment to ensure safe work practices.

Page: 7/15/2009. Energy control procedures Use of lockout/tagout equipment to ensure safe work practices. 1 of 6 1.0 PURPOSE This program applies to the installation, service, maintenance, or removal of any type of machinery, equipment, or components, in which the unexpected start up or release of stored energy

More information

4.1 The Vice-Chancellor and University Executive Committee

4.1 The Vice-Chancellor and University Executive Committee UON Key Risk Area: KRA 1.4 Plant and Equipment 1. Purpose This procedure describes how the University meets its obligation to ensure the health and safety of people, through the processes of selection,

More information

CLARKES ERO FEEDER MANUAL

CLARKES ERO FEEDER MANUAL CLARKES ERO FEEDER MANUAL It is the sole responsibility of the Owner and/or the Responsible Supervising Operators of this equipment to properly instruct their employees, either direct or contact, in the

More information

Isolation Lockout and Tagging

Isolation Lockout and Tagging PURPOSE To define the minimum system requirements for isolation of plant and equipment from hazardous substances, mechanical, electrical or other energy sources to protect all workers from personal injury

More information

General Lockout Training Briefing

General Lockout Training Briefing Page 1 of 5 Introduction What is Lockout? Lockout protects your personnel and plant from injury or accident by ensuring that equipment and machinery is properly isolated during scheduled maintenance, shutdown,

More information

Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028. Name Date Signature. Author Jarred Hearle 30/11/2014. Reviewed John Nulty 30/11/2014

Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028. Name Date Signature. Author Jarred Hearle 30/11/2014. Reviewed John Nulty 30/11/2014 Garbex Drum Crusher Safe Work Procedure PTES_HSE_SWP_028 Name Date Signature Author Jarred Hearle 30/11/2014 Reviewed John Nulty 30/11/2014 Approved Geoff Selfe 01/12/2014 Key Safety Acts Complete a 5

More information

Potable Water Truck Safe Work Procedure PTES_HSE_SWP_041. Name Date Signature. Author Geoff Selfe 25/01/2016. Reviewed Solomon Site 25/01/

Potable Water Truck Safe Work Procedure PTES_HSE_SWP_041. Name Date Signature. Author Geoff Selfe 25/01/2016. Reviewed Solomon Site 25/01/ Potable Water Truck Safe Work Procedure PTES_HSE_SWP_041 Name Date Signature Author Geoff Selfe 25/01/2016 Reviewed Solomon Site 25/01/2016 ----- Approved Michael Garkaklis 25/01/2016 Key Safety Acts Complete

More information

THE OSHA LOCK-OUT/TAG-OUT STANDARD

THE OSHA LOCK-OUT/TAG-OUT STANDARD PRESENTER'S GUIDE "LOCK-OUT/TAG-OUT" Training for THE OSHA LOCK-OUT/TAG-OUT STANDARD Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM

More information

Safety Indicators: Signal Words. Indicates an imminently hazardous situation which, if not avoided, is likely to result in death or serious injury.

Safety Indicators: Signal Words. Indicates an imminently hazardous situation which, if not avoided, is likely to result in death or serious injury. Safety (English) Safety Indicators: Signal Words Refiérase a la página SAFETY- 29 para español. For safety information in Spanish, refer to page SAFETY-29. The following signal words and colors are used

More information

Lockout / Tag out Program

Lockout / Tag out Program Lockout / Tag out Program Presented by DOSHTI www.doshti.com You will learn Purpose of Lockout- Tag out Requirements for LOTO Types of Hazardous Energy Procedures for LOTO The OSHA Standard for the Control

More information

DuPage County Environmental, Safety, Health & Property Loss Control Program Hazardous Energy Control (Lockout/Tagout)

DuPage County Environmental, Safety, Health & Property Loss Control Program Hazardous Energy Control (Lockout/Tagout) Purpose: To provide the minimum requirements for the lockout or tagout of energy isolating devices whenever work is performed or servicing is done on County of DuPage machinery, equipment, vehicles and

More information

RISK ASSESSMENT. Bobcat Excavator. Models , (Series D & G) For. Version 1.2

RISK ASSESSMENT. Bobcat Excavator. Models , (Series D & G) For. Version 1.2 PO Box 50, Hornsby, NSW 2077 Phone: 1800 643 853 Web: www.bobcat.com.au RISK ASSESSMENT For Bobcat Excavator Models 322 341, (Series D & G) CONTENTS Applicability Standards referenced in the preparation

More information

Lockout/Tagout Safety Policy

Lockout/Tagout Safety Policy University of North Carolina Wilmington Environmental Health & Safety Workplace Safety Lockout/Tagout Safety Policy GENERAL The UNCW Environmental Health & Safety Department (EH&S) is authorized by UNCW

More information

Deans, Directors, Heads of Schools and Departments and Research Institute Directors and Managers

Deans, Directors, Heads of Schools and Departments and Research Institute Directors and Managers Working at Height 1. PURPOSE 1.1 To ensure that any work at height is carried out in accordance with the legal requirements and associated guidance. This includes the use of scaffolds, towers, ladders,

More information

SWMS documented by: Feb Bo Ceprnja Date Feb Feb Feb 2018

SWMS documented by: Feb Bo Ceprnja Date Feb Feb Feb 2018 Contractor Company Details: BUILDSAFE SAFE WORK METHOD STATEMENT 0002 (Void Platform Stairs) Part 1 (To be used in conjunction with SWMS 0001 General Site Activities & SWMS 0002 Void Platform) Additional

More information

Gettysburg College. Energy Control Program

Gettysburg College. Energy Control Program Gettysburg College Energy Control Program Adopted October 2009 Reviewed and Updated February 2015 Reviewed and Updated July 2015 I. Energy Control Procedures Table of Contents A. General Lockout Procedures

More information

Operators & Maintenance Manual OPERATOR S MANUAL USAGE AND MAINTENANCE F100M F100M. Powered Fixed Hoist Ideal for raised swimming pools and hot tubs

Operators & Maintenance Manual OPERATOR S MANUAL USAGE AND MAINTENANCE F100M F100M. Powered Fixed Hoist Ideal for raised swimming pools and hot tubs MIllside House Anton Road Andover Hampshire SP10 2RW T: +44 (0)1256 896000 E: info@poollifts.co.uk Operators & Maintenance Manual OPERATOR S MANUAL USAGE AND MAINTENANCE F100M F100M Powered Fixed Hoist

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT Plant Identification : HAULOTTE LIGHT BOOMS 3522A (HTA 13P); 4527A (HTA 16P); 5533A (HTA 19P) and 3632T (HTT 13) Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking

More information

LOCKOUT/TAGOUT PROGRAM

LOCKOUT/TAGOUT PROGRAM 0 Appendix C OCCUPATIONAL SAFETY AND HEALTH PROGRAM LOCKOUT/TAGOUT PROGRAM Hazardous Energy Control Lockout/Tagout Program TABLE OF CONTENTS Section Page I. Purpose and Scope. 1 II. Definitions 1 III.

More information

THICKNESSER RISK ASSESSMENT (U003ra)

THICKNESSER RISK ASSESSMENT (U003ra) Task Being Carried Out: Area: Persons at Risk: Operation of T500 Thicknesser Brindle Mill Operatives, Maintenance engineers Description of Equipment: Wadkin T500 Thicknesser Serial No.: T500 82240 (Machine

More information

Quattrocycle BV. Quattrocycle. User Manual. Last update February Quattrocycle BV Bremkant EJ Middelbeers. User Manual Quattrocycle 1

Quattrocycle BV. Quattrocycle. User Manual. Last update February Quattrocycle BV Bremkant EJ Middelbeers. User Manual Quattrocycle 1 Quattrocycle User Manual Last update February 2010 Quattrocycle BV Bremkant 6 5091 EJ Middelbeers User Manual Quattrocycle 1 Table of Contents Page Chapter 1: Introduction 3 Chapter 2: Instructions for

More information

THE UNIVERSITY OF NORTH CAROLINA

THE UNIVERSITY OF NORTH CAROLINA THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL CHILLED WATER DEPARTMENT ENERGY CONTROL PROCEDURE The purpose of this document is to establish minimum requirements for the manual isolation and securing

More information

PLANT RISK ASSESSMENT

PLANT RISK ASSESSMENT PLANT RISK ASSESSMENT Forktruck: Year of Manufacture Make: Model: Serial : TCM FD30T3 Attachment: Name: Mfg: Model : Owner: Business/Organisation: Address: This header page and the following 5 pages have

More information

LOCKOUT/TAGOUT PLAN August 2015

LOCKOUT/TAGOUT PLAN August 2015 LOCKOUT/TAGOUT PLAN August 2015 Office of Environmental Health and Safety 423-354-5224 TABLE OF CONTENTS Purpose and Intended Use... 2 A. Types of Energy Sources... 2 B. Activities Requiring Lockout/Tagout

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

OPERATORS MANUAL MODEL 365 BACK LAPPING MACHINE WARNING

OPERATORS MANUAL MODEL 365 BACK LAPPING MACHINE WARNING MODEL 365 BACK LAPPING MACHINE OPERATORS MANUAL WARNING You must thoroughly read and understand this manual before operating the equipment, paying particular attention to the Warning & Safety instructions.

More information

Misaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii

Misaligned Folds Paper Feed Problems Double Feeds Won t Feed FLYER Won t Run iii Operator s Manual Table of Contents Operator Safety... 1 Introduction... 2 Unpacking and Setup... 3 Unpacking... 3 Setup... 4 FLYER Overview... 5 FLYER Diagram... 5 Capabilities... 5 Control Panel... 6

More information

3/8" Dr. Air Butterfly Impact Wrench

3/8 Dr. Air Butterfly Impact Wrench 8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and

More information

VERTICAL AIR COMPRESSORS

VERTICAL AIR COMPRESSORS VERTICAL AIR COMPRESSORS MODEL NO: VE15C150, VE18C150, VE25C150 PART NO: 2226010, 2226020, 2226025 OPERATION & MAINTENANCE INSTRUCTIONS LS0715 INTRODUCTION Thank you for purchasing this CLARKE Vertical

More information

LOCKOUT/TAGOUT PROGRAM

LOCKOUT/TAGOUT PROGRAM Santa Clarita Community College District LOCKOUT/TAGOUT PROGRAM Revised March 2018 TABLE OF CONTENTS PURPOSE... 3 COMPLIANCE...4 DEFINITIONS...5 SECTION I - ENERGY CONTROL PROCEDURES... 7 SECTION II -

More information

DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM

DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Introduction 2 Regulatory Requirements 2 Protective Materials

More information

PLANT HAZARD AND RISK ASSESSMENT WORKSHEET (PHA)

PLANT HAZARD AND RISK ASSESSMENT WORKSHEET (PHA) Matrix Assessment Date: 15.2.2011 Consequences Likelihood or Probability Plant Type: CRANE Plant Make: TADANO Plant Model: TL250E Fleet: 281 Plant Serial No. 335347 Assessment Facilitated by: A WHEELER

More information

Safety Powder Spray Systems

Safety Powder Spray Systems Instruction Sheet P/N 107 952C Safety Powder Spray Systems 1. Introduction This section contains general safety instructions for using your Nordson equipment. Task- and equipment-specific warnings are

More information

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT

PLANT HAZARD AND EQUIPMENT RISK ASSESSMENT Plant Identification : HAULOTTE HA16RTJ Potential Hazard Entanglement Can anything become entangled in moving parts? Crushing/Striking Can anyone be crushed or struck by moving objects due to: Risk es

More information

LOCK-OUT/TAG-OUT (LO/TO) SAFETY PROGRAM

LOCK-OUT/TAG-OUT (LO/TO) SAFETY PROGRAM LOCK-OUT/TAG-OUT (LO/TO) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.147 BASIS: Approximately three million workers in the United States face risks from uncontrolled energy when servicing machinery

More information

UCHC Lockout/Tagout Policy (4/09)

UCHC Lockout/Tagout Policy (4/09) UCHC Lockout/Tagout Policy (4/09) Background: This safety policy is applicable to all Health Center activities and addresses practices and procedures that are necessary to disable machinery or equipment

More information

PLANT RISK ASSESSMENT REPORT

PLANT RISK ASSESSMENT REPORT PLANT RISK ASSESSMENT REPORT SECTION 1: PLANT IDENTIFICATION Report Number: 407/751 Assessment Date: 5 th May 2015 Company: Wacker Neuson Plant Type: Telescopic Light Tower Make: Wacker Neuson Model: LTN6

More information

230-LOCKOUT/TAGOUT PROGRAM

230-LOCKOUT/TAGOUT PROGRAM 230.1 PURPOSE A. To confirm implementation, operation, and recordkeeping of Central New Mexico Community College(CNM) lockout/tagout program in compliance with 29 CFR 1910.147. 230.2 SCOPE A. The requirements

More information

Werk-Brau D-Lock Coupler Installation and Operation Manual

Werk-Brau D-Lock Coupler Installation and Operation Manual Werk-Brau D-Lock Coupler Installation and Operation Manual SERIAL NUMBER: The D-Lock Coupler (Fully Automatic with Dual Pin Locking) International Patents pending IMPORTANT: The booklet should be kept

More information

ModelsEZU-15 & EZU-15-R. BISHAMON INDUSTRIES CORPORATION 5651 East Francis Street Ontario, California 91761, USA (909) (800)

ModelsEZU-15 & EZU-15-R. BISHAMON INDUSTRIES CORPORATION 5651 East Francis Street Ontario, California 91761, USA (909) (800) UP P n e u m a t i c ModelsEZU-15 & EZU-15-R BISHAMON INDUSTRIES CORPORATION 5651 East Francis Street Ontario, California 91761, USA (909) 390-0055 (800) 231-3187 Table of Contents GETTING STARTED......................................

More information

Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015

Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015 Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039 Name Date Signature Author Jarred Hearle 27/11/2015 Reviewed FMG Site Team 27/11/2015 ---------- Approved Geoff Selfe 27/11/2015

More information

SAFETY MANAGEMENT SYSTEM

SAFETY MANAGEMENT SYSTEM Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving

More information

LADDERS FIXED AND PORTABLE

LADDERS FIXED AND PORTABLE CONTRACTOR WHS HAZARD STANDARD LADDERS FIXED AND PORTABLE EXTERNAL USE ONLY Principles in the Optus Contractor WHS management process CONTRACTOR MANAGEMENT STAGES PRINCIPLES THIS STANDARD REQUISITION Requisition

More information

OWNER S MANUAL. This manual contains; IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS MAINTENANCE FACTORY SERVICE REPAIR PARTS WARRANTY

OWNER S MANUAL. This manual contains; IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS MAINTENANCE FACTORY SERVICE REPAIR PARTS WARRANTY OWNER S MANUAL This manual contains; IMPORTANT SAFETY INFORMATION INSTALLATION INSTRUCTIONS MAINTENANCE FACTORY SERVICE REPAIR PARTS WARRANTY Models covered; PA506 EL506 Ergonomic Tool Arms, LLC PO Box

More information

UNCONTROLLED IF PRINTED. Issued with the authority of the Chief Commissioner and General Manager of Scouts Australia NSW

UNCONTROLLED IF PRINTED. Issued with the authority of the Chief Commissioner and General Manager of Scouts Australia NSW PROCEDURE Plant and equipment safety Issued with the authority of the Chief Commissioner and General Manager of Chief Commissioner signature Chief Executive Officer signature Sponsor Head of Risk Document

More information

Instruction Manual: VelectriX Urban 2.0

Instruction Manual: VelectriX Urban 2.0 Instruction Manual: VelectriX Urban 2.0 CONTENTS Safe Riding Recommendations Page 2 Pre-Ride Checklist Page 3 Display and Controls Page 4 Maintenance Page 8 Warranty Page 9 Contact Details Page 10 Service

More information

USE AND MAINTENANCE LIGHT TOWER

USE AND MAINTENANCE LIGHT TOWER USE AND MAINTENANCE LIGHT TOWER General Safety Information Allowed use The light tower has been designed to lighten the area in which it is positioned and oriented, after installing it on a generating

More information

Western Sydney University Safety Inspection Checklist - Laboratory Environments

Western Sydney University Safety Inspection Checklist - Laboratory Environments Western Sydney University Safety Inspection Checklist - Laboratory Environments Useful Hint: To maximise the benefits that can be gained from a workplace inspection activity read the Western Sydney University

More information

Potential hazards People at risk and how? Actions already in place Further action required Action by

Potential hazards People at risk and how? Actions already in place Further action required Action by Risk Assessment Flat Roof Repair Prepared by Oracle Managed Services For: BAM FM On: 24/02/2017 Review date: N/A Potential hazards People at risk and how? Actions already in place Further action required

More information

KMX Kompact Sports Trike

KMX Kompact Sports Trike KMX Kompact Sports Trike Assembly Instructions 1.0 Introduction Thank you for choosing KMX! When properly assembled and set up your KMX will provide many years of enjoyment. KMX Karts Ltd does its utmost

More information

E2.14 Control of Hazardous Energy. Effective Date: 03/01/2018

E2.14 Control of Hazardous Energy. Effective Date: 03/01/2018 University Policy Volume E2: Environment, Health, Safety and Security E2.14 Control of Hazardous Energy Responsible Office: Facilities Management Responsible Officer: Safety Officer POLICY STATEMENT All

More information

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment

310 SERIES TILT-TO-LOAD ROTATOR. The Specialist In Drum Handling Equipment OPERATOR S MANUAL FOR MORSE TILT-TO-LOAD DRUM ROTATOR SAFETY INFORMATION: While Morse Manufacturing Co. drum handling equipment is engineered for safety and efficiency, a high degree of responsibility

More information

Plant Risk Assessment Self Propelled Scissorlift type Elevating Work Platform Model: S2755RT

Plant Risk Assessment Self Propelled Scissorlift type Elevating Work Platform Model: S2755RT 134 Ogilvie Avenue, Echuca 3564 Plant Risk Assessment Self Propelled Scissorlift type Elevating Work Platform This Hazard Identification & Risk Assessment has been prepared based on several key assumptions:

More information

Safety Manual: Hazardous Energy. January, 2017

Safety Manual: Hazardous Energy. January, 2017 Safety Manual: Hazardous Energy January, 2017 9.0 Hazardous Energy Introduction Energized equipment in the workplace pose a significant risk of injury and death. If the unexpected energization or start-up

More information

RISK MANAGEMENT REPORT

RISK MANAGEMENT REPORT RISK MANAGEMENT REPORT Report Number Assessment Company Lot Number Assessment Purpose State DYNA 20120612-1129 Dynapac Sale QLD TABLE OF CONTENTS Section 1 - Important Information Contains information

More information

Original Date of Issue: 04/09

Original Date of Issue: 04/09 POLICIES AND PROCEDURES DEPARTMENT: Environmental Health and Safety SUBJECT: Electrical Safety Program Original Date of Issue: 04/09 Reviewed 12/2011 Revised 12/2011 BACKGROUND ELECTRIC SHOCK It is well

More information

Product Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment

Product Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment Product Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment 1. Application Emergency eyewash and eye/face wash equipment are prescribed first aid installations for workplaces

More information

Chapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum

Chapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum Chapter 2 Rigging Cutting Wire Rope The wire rope must be tightly seized on both sides of the point where the wire rope will be cut, as shown in Figure 2-1. Seize the wire rope with either seizing wire

More information

20 Ton SD Shop Press Operating Instructions

20 Ton SD Shop Press Operating Instructions 20 Ton SD Shop Press Operating Instructions MODEL NO. 850SD Hazard Symbols Used in the Manuals This manual includes the hazard symbols defined below when the operations or maintenance job involves a potential

More information

Product Information Report Lockout/Tagout Hazardous Energy Control

Product Information Report Lockout/Tagout Hazardous Energy Control Overview A properly implemented (LOTO) program is designed to protect workers involved in the maintenance and servicing of equipment from the dangerous effects of hazardous energy caused by the unexpected

More information

Air Tractor Preventative Maintenance Manual And Troubleshooting

Air Tractor Preventative Maintenance Manual And Troubleshooting 1.0 Overview This maintenance schedule will assist in the maintenance and troubleshooting procedures for the Unified Industries Air Tractor. The first portion of this section details the general maintenance

More information

Hand and Power Tools

Hand and Power Tools Hand and Power Tools Short description This section outlines the guidance for assessing and controlling hazards associated with hand and power tools. Contact person Andrew Richardson Name HSEQ Functional

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed

More information