Tefzel ETFE Conductive Fluoroplastic
|
|
|
- Doris Walters
- 6 years ago
- Views:
Transcription
1 This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product Grade/Type : HT 2160, HT 2170 Product Use : Plastic material for further processing Restrictions on use : Do not use in medical applications involving permanent implantation in the human body., See Section 16 Manufacturer/Supplier : The Chemours Company FC, LLC 1007 Market Street Wilmington, DE United States of America Product Information : CHEM (outside the U.S ) Medical Emergency : (outside the U.S ) Transport Emergency : CHEMTREC: (outside the U.S ) SECTION 2. HAZARDS IDENTIFICATION Not classified as a hazardous substance or mixture according to the Occupational Safety and Health Administration (OSHA) Hazard Communication Standard Other hazards The thermal decomposition vapours of fluorinated plastics may cause polymer fume fever with flu-like symptoms in humans, especially when smoking contaminated tobacco. 1 / 10
2 SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS This product does not contain any components that require disclosure according to OSHA Hazard Communication Standard SECTION 4. FIRST AID MEASURES General advice Inhalation Skin contact Eye contact Ingestion Most important symptoms/effects, acute and delayed Protection of first-aiders : Never give anything by mouth to an unconscious person. No hazards which require special first aid measures. : Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. Consult a physician. : Wash off with soap and water. Cool skin rapidly with cold water after contact with molten material. Do not peel polymer from the skin. Consult a physician. : Hold eye open and rinse slowly and gently with water for minutes. Get medical attention immediately. : Not a probable route of exposure. However, in case of accidental ingestion, call a physician. : First Aid responders should pay attention to self-protection and use the recommended protective clothing Notes to physician : Treat symptomatically. 2 / 10
3 SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media Unsuitable extinguishing media Specific hazards : Carbon dioxide (CO2), Dry powder, Foam, Water : Hazardous decomposition products formed under fire conditions. acid fluorides Fluorinated compounds Carbon monoxide Hydrogen fluoride Special protective equipment for firefighters : In the event of fire, wear self-contained breathing apparatus. Wear suitable protective equipment. Wear neoprene gloves during cleaning up work after a fire. Further information SECTION 6. ACCIDENTAL RELEASE MEASURES NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up. Safeguards (Personnel) : Ventilate the area. Refer to protective measures listed in sections 7 and 8. Material can create slippery conditions. Environmental precautions Spill Cleanup : No special environmental precautions required. : Sweep up and shovel into suitable containers for disposal. Clean contaminated floors and objects thoroughly while observing environmental regulations. Accidental Release Measures : For disposal considerations see section / 10
4 SECTION 7. HANDLING AND STORAGE Handling (Personnel) : For personal protection see section 8. Protect from contamination. When opening containers, avoid breathing vapours that may be emanating. Avoid breathing dust. Avoid contamination of cigarettes or tobacco with dust from this material. Provide appropriate exhaust ventilation at dryers, machinery and at places where dust or volatiles can be generated. In case of insufficient ventilation, wear suitable respiratory equipment. Do not use a torch to clean this material from equipment without local exhaust ventilation and respirator. Regular cleaning of equipment, work area and clothing. Wash hands and face before breaks and immediately after handling the product. Do not contaminate tobacco products. General precaution for all plastics and elastomers: Do not breathe fumes evolved from hot polymer. Handling (Physical Aspects) Dust explosion class Storage Storage period Storage temperature : Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). : Keep container tightly closed in a dry and well-ventilated place. Protect from contamination. Stable under recommended storage conditions. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering controls : Ensure adequate ventilation, especially in confined areas. Good general ventilation should be provided to keep dust concentrations below the exposure limits. Local exhaust ventilation should be employed to minimize airborne contamination. Personal protective equipment Respiratory protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. 4 / 10
5 Eye protection Skin and body protection : Safety glasses with side-shields : If there is a potential for contact with hot/molten material wear heat resistant clothing and footwear. Regular cleaning of equipment, work area and clothing. Exposure Guidelines Exposure Limit Values This product does not contain any exposure limits that require disclosure according to OSHA Hazard Communication Standard Non-Constituent(s) Dust (inhalable and respirable fraction) Permissible exposure limit: (OSHA) 5 mg/m3 8 hr. TWA Respirable fraction. Permissible exposure limit: (OSHA) 15 mg/m3 8 hr. TWA Total dust. TLV (ACGIH) 3 mg/m3 TWA Respirable particles. TLV (ACGIH) 10 mg/m3 TWA Inhalable particles. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical state : solid Form : pellets Color : black Odor : none 5 / 10
6 Odor threshold ph Melting point/freezing point Boiling point/boiling range : Melting point/range C ( F) Flash point : Not applicable Evaporation rate Flammability (solid, gas) Upper explosion limit Lower explosion limit Vapour Pressure Vapour density Density Specific gravity (Relative density) Water solubility Solubility(ies) Partition coefficient: n- octanol/water : 1.7 g/cm3 : insoluble Auto-ignition temperature : C Ignition temperature : 470 C Decomposition temperature 6 / 10
7 Viscosity, kinematic Viscosity, dynamic Limiting oxygen index : 30 % ASTM D 2863 SECTION 10. STABILITY AND REACTIVITY Reactivity : No decomposition if stored and applied as directed. Chemical stability : Stable under recommended storage conditions. Possibility of hazardous reactions : During drying, cleaning and moulding, small amounts of hazardous gases and/or particulate matter may be released. These may irritate eyes, nose and throat. Large molten masses may give off hazardous gases. Conditions to avoid : To avoid thermal decomposition, do not overheat. Abnormally long processing time or high temperatures can produce irritating and toxic fumes. Stable under normal conditions. Incompatible materials : Powdered metals Finely divided aluminium, potent oxidizers like fluorine (F2), and, related compounds Hazardous decomposition products : Hazardous thermal decomposition products:: Hydrogen fluoride, Carbonyl fluoride, acid fluorides SECTION 11. TOXICOLOGICAL INFORMATION Further information : The product contains no substances classified as hazardous to health in concentrations which should be taken into account. Carcinogenicity The carcinogenicity classifications for this product and/or its ingredients have been determined according to HazCom 2012, Appendix A.6. The classifications may differ from those listed in the National Toxicology Program (NTP) Report on Carcinogens (latest edition) or those found to be a potential carcinogen in the International Agency for Research on Cancer (IARC) Monographs (latest edition). 7 / 10
8 Material IARC NTP OSHA Carbon black 2B SECTION 12. ECOLOGICAL INFORMATION Additional ecological information : The product contains no substances classified as hazardous to the environment in concentrations which should be taken into account. SECTION 13. DISPOSAL CONSIDERATIONS Waste disposal methods - Product : Like most thermoplastic plastics the product can be recycled. If recycling is not practicable, dispose of in compliance with local regulations. Incinerate only if incinerator is capable of scrubbing out hydrogen fluoride and other acidic combustion products. Contaminated packaging : Empty containers should be taken to an approved waste handling site for recycling or disposal. SECTION 14. TRANSPORT INFORMATION Not classified as dangerous in the meaning of transport regulations. SECTION 15. REGULATORY INFORMATION TSCA : On the inventory, or in compliance with the inventory 8 / 10
9 SARA 313 Regulated Chemical(s) PA Right to Know Regulated Chemical(s) NJ Right to Know Regulated Chemical(s) California Prop. 65 : This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. : Substances on the Pennsylvania Hazardous Substances List present at a concentration of 1% or more (0.01% for Special Hazardous Substances): Carbon black : Substances on the New Jersey Workplace Hazardous Substance List present at a concentration of 1% or more (0.1% for substances identified as carcinogens, mutagens or teratogens): Carbon black : WARNING! This product contains a chemical or chemicals known to the State of California to cause cancer.tetrafluoroethylene, Carbon black SECTION 16. OTHER INFORMATION NFPA Health : 2 Flammability : 1 Reactivity/Physical hazard : 0 Restrictions for use : Do not use or resell Chemours materials in medical applications involving implantation in the human body or contact with internal body fluids or tissues unless agreed to by Seller in a written agreement covering such use. For further information, please contact your Chemours representative. Tefzel and any associated logos are trademarks or copyrights of The Chemours Company FC, LLC. Chemours and the Chemours Logo are trademarks of The Chemours Company. Before use also read the following bulletin(s): Fluoropolymer Safe Handling Guide published by the Society of the Plastics Industry. 9 / 10
10 Revision Date : 06/22/2016 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Significant change from previous version is denoted with a double bar. 10 / 10
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE fluoroplastics
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PTFE Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
AF Amorphous Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox NRT 8908 Paste
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE FLUOROPOLYMERS
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox 240 Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox GPL 21(X) Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Neoprene polychloroprene
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox 143 Series Oils
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PFA Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Conductive Fluoropolymer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ELVAMIDE 8061 nylon multipolymer resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
: Tefzel ETFE fluoropolymers
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
Tynex A abrasive filaments
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of Japan and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of Japan and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
Corian Solid Surface Material
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ZODIAQ Quartz Surfaces
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox RFE PFPE High Performance Lubricant
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Ref Product name : Corian Solid Surface Product Use : sheets and shaped articles, For professional users only.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Manufacturer : DuPont Performance Elastomers L.L.C Bellevue Park Corporate Center, 300 Bellevue Parkway Wilmington, Delaware 19809
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ACP-175 Clean Sweep Date: PRODUCT AND COMPANY IDENTIFICATION. Floor Maintenance / Sweeping Compound
SAFETY DATA SHEET ACP-175 Clean Sweep Date: 8-12-15 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name Clean Sweep Other Means of Identification Product Code ACP-175 Recommended Use
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
Revision date: 01/11/2015 SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance Formula : CaCO 3 Molecular weight : : 100.09 g/mol CAS No. :
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ZODIAQ Quartz Surfaces
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Safety Data Sheet HIGH TEMP GLUE STICKS (10 PIECES)
SECTION 1. IDENTIFICATION Commercial Product : Name Product number : 0890100050 SDS-Identcode : 10033067 Product Use Description : Hot-melt adhesives Company : Wurth USA Inc. 93 Grant St. 07446 Ramsey,
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 05/10/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Poly(vinyl buytral) Molecular Formula:
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Manufacturer Name: Federal-Mogul Corporation 26555 Northwestern Highway Southfield, Michigan 48034 U.S.A. Intended Use: Industrial
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "HYTREL" POLYESTER ELASTOMERS ALL IN
DuPont Tyvek ThermaWrap R5.0
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 10/27/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Polypropylene, isotactic, chlorinated
Issue Date: 01-Nov-2013 Revision Date: 06-Apr-2015 Version 2 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 01-Nov-2013 Revision Date: 06-Apr-2015 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Deluxe Deodorizing Urinal Screen IP-040
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 12/06/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Propylene glycol monostearate Molecular
Issue Date: Revision Date: Version 1 1. IDENTIFICATION
Safety Data Sheet Issue Date: 8-14-2015 Revision Date: 8-14-2015 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # DRYLOK Liquid Etch CCC-040 Recommended use
KEVLAR brand engineered elastomer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1. IDENTIFICATION Product Identifier Product Name Copper Thred Gard. Other means of Identification Product Code Recommended Use Recommended Restrictions CG04, CG08, CG16. Anti
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1. IDENTIFICATION Product Identifier Product Name EverSEAL 183. Other means of Identification Product Code E183. Recommended Use Recommended Restrictions Pre-applied NPT Thread
Issue Date: 12-Dec-2014 Revision Date: 19-Dec-2014 Version 1 1. IDENTIFICATION HANDI-CLEAN EATERS III ODOR CONTROLER 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 12-Dec-2014 Version 1 1. IDENTIFICATION Product Identifier Product Name HANDI-CLEAN EATERS III ODOR CONTROLER Other means of identification SDS # S4884 Recommended use of
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1. IDENTIFICATION Product Identifier Product Name Gasoila Light Cutting Oil. Other means of Identification Product Code Recommended Use Recommended Restrictions WL32, WL28. Lubricant.
Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.
Safety Data Sheet Issue Date: 13-Dec-212 Revision Date: 1-APR-215 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # United 432 PHASER GLASS BLAST UNITED-432
Version 1.4 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Manufacturer or supplier's details Company : QIAGEN GmbH QIAGEN Str. 1 D-40724 Hilden Telephone : +49-02103-29-0 Responsible Department E-mail
ACP-172 Upset Absorbent Issue Date: PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET ACP-172 Upset Absorbent Issue Date: 6-3-15 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name Upset Absorbent Other Means of Identification Product Code ACP-172 Recommended
Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox PFPE/PTFE Greases (GPL 20(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Issue Date 03-Jan-2011 Revision Date 01-May-2013 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET Issue Date 03-Jan-2011 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name EXCEL-P FORMULA POURABLE DENTURE MATERIAL CAS-No. 9011-14-7 (PMMA) EC No. 618-466-4
Safety Data Sheet. Issue Date: 06-Aug-2009 Revision Date: 18-Apr-2014 Version 1 1. IDENTIFICATION. Liquid disinfectant cleaner.
Safety Data Sheet Issue Date: 06-Aug-2009 Revision Date: 18-Apr-2014 Version 1 1. IDENTIFICATION Product Identifier Product Name Restroom Stop Other means of identification SDS # WC-033 Product Code #22
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).
1. PRODUCT AND COMPANY IDENTIFICATION Product name : IRDye 700 Phosphoramidite Part Number(s) : 830-05368, 4200-33, 4200-34 Brand : LI-COR Identified uses : Laboratory chemicals, Manufacture of substances
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1. IDENTIFICATION Product Identifier Product Name P.T.F.E. Thred Tape. Other means of Identification Product Code Recommended Use Recommended Restrictions MT14, MT15, MT16, MT17,
Safety Data Sheet. (L-Aspartic Acid) L-Aspartic Acid DATE PREPARED: 3/6/2017. Section 1. Product and Company Identification
Section 1. Product and Company Identification L-Aspartic Acid Product Name CAS Number 56-84-8 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899
SIGMA-ALDRICH. SAFETY DATA SHEET Version 5.2 Revision Date 02/26/2015 Print Date 04/02/2016
SIGMA-ALDRICH sigma-aldrich.com SAFETY DATA SHEET Version 5.2 Revision Date 02/26/2015 Print Date 04/02/2016 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Krytox LVP grease
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 01/03/17 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: N-Ethyl o,p-toluenesulfonamide Molecular
Associates of Cape Cod, Inc.
1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product Identifiers Product Name : Pyrotell Product Number : G2003, G2006, G2125, G2250, G5003, G5006, G5125, G5250, and GP5003 1.2 Relevant identified uses of
SAFETY DATA SHEET. Disposal considerations : Dispose of wastes in an approved waste disposal facility.
Material number 1016027 Page Page 1 of 8 SECTION 1. IDENTIFICATION Product name : 5301-2 Frit 50LB BAG 000000000001016027 Product code : RS_FP_600330 Manufacturer or supplier's details Company name of
Associates of Cape Cod, Inc.
1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Pyrosate Product Number : PSL-0.03, -0.125, and -0.25 1.2 Relevant identified uses of the substance or mixture and uses advised
Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.
Safety Data Sheet Issue Date: 16-Feb-2012 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # United 894 ZYME-OUT UNITED-894 Recommended use of the chemical
Issue Date: 04-Dec-2004 Revision Date: 18-Nov-2013 Version 1 1. IDENTIFICATION. Plastpro Fiberglass Doors 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 04-Dec-2004 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Plastpro Fiberglass Doors PLASTPRO-001 Recommended use of the chemical
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1 IDENTIFICATION Product Identifier Product Name Stainless Steel Thred Tape Other means of Identification Product Code Recommended Use Recommended Restrictions SA26, SA26-34,
Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: 2017 Product Name: Slip Stop Other Means of Identification SDS #: F6523 1. PRODUCT AND COMPANY IDENTIFICATION Recommended
SAFETY DATA SHEET. CU-8120 Enzyme & bacteria digestive powder. None. (800) (800) Category 5 Category 3 Category 2B
SAFETY DATA SHEET 1. Identification Product Identifier Other means of identification Product code Recommended use Recommended restrictions Manufacturer information Company name Address Telephone Fax Emergency
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance : Tragacanth CAS No. : 9000-65-1 Product code Formula Synonyms Tragacanth Gum Revision
Issue Date: 27-Dec-2011 Revision Date: 28-Jul-2015 Version 1 1. IDENTIFICATION. Buckeye Sanicare Disinfecting Wipes
Safety Data Sheet Issue Date: 27-Dec-2011 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Buckeye Sanicare Disinfecting Wipes BE-50960200 Product Code 50960200
Safety Data Sheet. Issue Date: 14-Feb-2009 Revision Date: 09-Dec-2013 Version 1 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 14-Feb-2009 Revision Date: 09-Dec-2013 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Mildew Stain Remover WC-003 Product
: Ceramic Aluminum Oxide Nylox Brush
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Ceramic Aluminum Oxide Nylox Brush 1.2. Relevant identified uses of the substance
: : Sontara Old Hickory, Inc. 326 Swinging Bridge Rd. Old Hickory, TN 37138
Safety Data Sheet This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory Requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
SECTION 1: PRODUCT AND COMPANY INFORMATION SECTION 2: HAZARD(S) IDENTIFICATION
Safety Data Sheet (SDS) MINNCOR Hand Sanitizer SDS Revision Date: 7/01/2016 SECTION 1: PRODUCT AND COMPANY INFORMATION Product Name: Product Code: Recommended Use: Dilution Information: Manufactured for:
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 4.3 Revision Date 12/12/2012 Print Date 03/13/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Molecular sieves Product Number
Safety Data Sheet. (Pramoxine Hydrochloride) Pramoxine Hydrochloride DATE PREPARED: 2/16/2016. Section 1. Product and Company Identification
Section 1. Product and Company Identification Product Name CAS Number 637-58-1 Pramoxine Hydrochloride Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914)
KAY INDOOR/OUTDOOR ABSORBENT. Use only for the purpose on the product label.
SAFETY DATA SHEET KAY INDOOR/OUTDOOR ABSORBENT Section 1. Chemical product and company identification Product name Recommended use and restrictions KAY INDOOR/OUTDOOR ABSORBENT Cleaning product Use only
Product: Casting Wax Revision Date: 11/11/2015 SECTION 1 - IDENTIFICATION
SECTION 1 - IDENTIFICATION Product Identifier Product Name: Casting Wax Product Code: 150-57980 Recommended Use of the Chemical and Restrictions on Use Recommended Use: A dental wax used for making a pattern
2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 19-Oct-2014 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # New Shield New Shield Recommended use of the chemical and restrictions
Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Issue Date: 01-Jun-2010 Revision Date: 10-Sep-2015 Version 1 1. IDENTIFICATION MSH-32, MSH-1, MSH HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 01-Jun-2010 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Product Code MSH - MICRO SHIELD ACE-009 MSH-32, MSH-1, MSH-55 Recommended
Issue Date 17-Dec-2012 Revision Date 06-Jun-2013 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION
SAFETY DATA SHEET Issue Date 17-Dec-2012 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name TRAY MATERIAL POWDER Polymethyl methacrylate Co- and ter-polymer blends CAS No.
POLY-TEMP GAS PTFE THREAD SEAL TAPE SAFETY DATA SHEET
POLY-TEMP GAS PTFE THREAD SEAL TAPE SAFETY DATA SHEET SECTION 1: IDENTIFICATION Product Name: POLY-TEMP Gas PTFE Thread Seal Tape Manufacturer / Supplier: Anti-Seize Technology 2345 N. 17th Ave. Franklin
SAFETY DATA SHEET. Crafters Choice Moisturizing Lotion with Evening Primrose. Product is sold ready to use.
Issuing Date: 05/25/2016 SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name Recommended use Product dilution information Supplier / Manufacturer Emergency Phone Number General purpose lotion Product
SAFETY DATA SHEET. 1. Identification. 2. Hazard(s) identification. Product name ECOCOOL SYN 005. Other means of identification. No data available.
1. Identification Product name ECOCOOL SYN 005 Other means of identification Recommended use: Restrictions on use: Metalworking fluid Industrial use only Manufacturer/Importer/Supplier/Distributor Information
SAFETY DATA SHEET FOAMING INSTANT HAND SANITIZER ALCOHOL FREE. Product Name : FOAMING INSTANT HAND SANITIZER ALCOHOL FREE
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : Recommended use : Hand sanitizer Restrictions on use : Reserved for industrial and professional use Product dilution information : Product is
Version 1.7 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Manufacturer or supplier's details Company : QIAGEN GmbH QIAGEN Str. 1 D-40724 Hilden Telephone : +49-02103-29-0 Responsible Department E-mail
MATERIAL SAFETY DATA SHEET
Issue Date: December 25, 2014 Revision Date: December 10, 2015 BOSTER BIOLOGICAL TECHNOLOGY Co.,Ltd. 3942 B Valley Ave, Pleasanton, CA, 94566 Phone: 888-466-3604 Fax: 925-215-2184 Email: boster@bosterbio.com
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION PARALOID# K-120N Processing Aid Supplier Rohm and Haas Company 100 Independence Mall West Philadelphia, PA 19106-2399 USA Revision date:
SAFETY DATA SHEET PRODUCT AND COMPANY IDENTIFICATION
SECTION 1. SAFETY DATA SHEET PRODUCT AND COMPANY IDENTIFICATION Product name: SafeSorb Recommended use: Additive Restrictions on use: Use only for the purpose on the product label. Product dilution information:
SAFETY DATA SHEET <#####> REMEND CORNEAL REPAIR GEL Version 1.0 Revision Date 01/07/2014
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product information Product Name: MSDS Number: 122000010653 Company BAYER HEALTHCARE LLC Animal Health Division 12707 Shawnee Mission
Biopersistent Special Purpose Fiber
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : Micro-Strand 475 Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver, CO USA 80127 Telephone : +1 303-978-2000
SAFETY DATA SHEET 1. PRODUCT IDENTIFICATION 3. COMPOSITION/INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES
SAFETY DATA SHEET Product Name: Catalog Number: 1. PRODUCT IDENTIFICATION HEPES Buffer Solution (1M) B351xx Recommended Use: For in vitro research use only Company: Atlanta Biologicals, Inc. 4172 Industry
Issue Date: 02-Aug-2004 Revision Date: 04-Jun-2015 Version 1 1. IDENTIFICATION. Water based defoamer.
Safety Data Sheet Issue Date: 02-Aug-2004 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # STEAM DEFOAMER LBI-047 Product Code 295 Recommended use of the
Lithium aluminum titanium phosphate Revision Date: Mar Safety Data Sheet
1. Product and Company Identification Safety Data Sheet Product Name: Lithium aluminum titanium phosphate CAS#: 120479-61-0 Identified uses: Laboratory chemicals, Research Formula: Li 1.5Al 0.5Ti 1.5(PO
SAFETY DATA SHEET FOAMING NO ALCOHOL HAND SANITIZER
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : Product Codes : 68209, 68217, 68241, 68244, 68250, 68278, 68291 Recommended use : Hand sanitizer Product dilution information : Product is sold
GHS SAFETY DATA SHEET (SDS)
GHS SAFETY DATA SHEET (SDS) SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION PRODUCT: Part #1562 Nomex Honeycomb, 1.8 lb. FIBRE GLAST DEVELOPMENTS CORP. 385 CARR DRIVE BROOKVILLE, OH 45309 TELEPHONE: (937)
SAFETY DATA SHEET TIDY PEARL FOAMING HAND CLEANER
SECTION 1 PRODUCT AND COMPANY IDENTIFICATION Product Name : Product Code : A7881 Recommended use : General purpose hand soap Product dilution information : Product is sold ready to use. Manufactured for
SIGMA-ALDRICH. Material Safety Data Sheet Version 3.3 Revision Date 05/09/2012 Print Date 12/24/2013
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 3.3 Revision Date 05/09/2012 Print Date 12/24/2013 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Activated charcoal Product Number
1. IDENTIFICATION FAST FIND LEAK DETECTOR. Package type: 32oz & 1 gallon. For Professional use only. 2. HAZARDS IDENTIFICATION
SAFETY DATA SHEET Issue Date 01-Jun-2010 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Other Information FAST FIND LEAK DETECTOR FFD Package type: 32oz