Stainless steel valves for corrosive environments & water base fluids

Size: px
Start display at page:

Download "Stainless steel valves for corrosive environments & water base fluids"

Transcription

1 able E135-16/E Stainless steel valves for corrosive environments & water base fluids ex-proof solenoid valves, Multicertification EX, IEEx, E or ULUS certification Ex-proof solenoid Valve body Solenoid plunger Spool / poppet Spring Manual override pin able entrance Handwheel manual override Manual reset DLHX(S)6-3/M/V DLHMX(S)4-3/M/R DHX(S)4-0711/M New line of directional solenoid valves and pressure relief valves in stainless steel execution for corrosive environments. Ex-proof Stainless steel solenoids, with EX, IEEx, E Multicertification or ULUS North merican certification, for hazardous areas - see section,. wo executions are available: X stainless steel for external and internal parts, to withstand extreme and corrosive environmental conditions, and to ensure full compatibility also with water base and special fluids. XS stainless steel for external parts to withstand extreme and corrosive environmental conditions. Internal components are derived from standard valves. Directional valves are available in two basic versions: poppet type, 3-way leak free (suitable for accumulator systems) or spool type, 4-way on-off valves. DHX(S) and DLHX(S) valves are SIL compliance with IE (ÜV certified) - see section SINLESS SEEL VLVES: MIN D Valve execution (1) X (5) DHX4 DLHX6 DLHX4 DLHMX4 DLHX6 DLX6 DLHX DLX R-MX-3 R-MX-6 R REX-20 HMX-* S LIX-2531* LIMMX-2/* XS DHXS6 DHXS4 DLHXS6 DLHXS4 DLHMXS6 DLHMXS4 DLHXS6 DLXS6 DLHXS DLXS R-MXS-3 R-MXS-6 R REXS-20 HMXS-* LIMMXS-2/* Description 4 way, spool type direct solenoid valves direct solenoid valves direct solenoid valves piloted solenoid valve piloted solenoid valve hydraulic operated valve hydraulic operated valve relief valve direct screw-in relief valve direct modular relief valve DIN cartridge (4) Voltages EX, IEEx ISO Input size D class (2) 50/60Hz ower Max flow l/min Dp (at max flow) bar see diagram at section Max pressure bar (3) no 6, 4 8 W (2) 12 W no no no no 25 (ISO7368) , 4 4, 3 6, 4 4, 3 6, 4 4, 3-8 W 25 W 8 W 25 W 8 W 25 W - class (2) 6, 5 3 ULUS 6, 5 3 6, Input ower 12 W 33 W 12 W 33 W 12 W 33 W , 4 8 W 12 W ,5 40 (60 ED) 120 (150 ED) Notes: (1) XS6 and XS4 versions differ only for the coil power (see Input ower) (2) Solenoid temperature class see section (3) Max pressure on port = 110 bar (4) Optional electrohydraulic venting available on request. (5)he X valves in full stainless steel execution are factory tested by tos with mineral oil or pure water in order to avoid the contamination of the end user system. t the end of each valve model code must be specified the type of fluid to be used in the valve s testing: H for hydraulic oil or W for pure water. mbient temperature: Valves are provided by HNR seals, which allow min ambient temperature down to -40 (max oil viscosity = 380 cst). he min ambient temperature for valves with /E option (FKM seals) is -20 Max ambient temperature for valves without solenoids is. 1.1 SIL compliance with IE 61508: 2010 DHX(S), DLHX(S) meets the requirements of: - S3 (systematic capability) - max SIL 2 (HF = 0 if the hydraulic system does not provide the redundancy for the specific safety function where the component is applied) - max SIL 3 (HF = 1 if the hydraulic system provides the redundancy for the specific safety function where the component is applied) E135

2 2 MERILS SEIFIION Valve type DLHX(S) DLHMX(S) solenoid housing ISI 630 valve body ISI 316L internal parts for X execution + internal parts for XS execution + DHX(S) ISI 630 ISI 316L ISI 316L, 420, 440, 430F ISI 302 HNR (buna) FKM (viton) ISI 316L, 420, 440, 430F ISI 316L, 420, 440, 430F ISI 420 spring ISI 302 DLHX(S) ISI 630 ISI 630 ISI 302 DLHX(S) ISI 630 ISI 302 std seals /E HNR (buna) FKM (viton) HNR (buna) FKM (viton) HNR (buna) FKM (viton) DLX(S) DLX(S) R-*X(S) HMX(S) LIMMX(S) ISI 630 ISI 630 ISI 630 ISI 316L ISI 316L ISI 316L ISI 316L, 420, 440, 430F ISI 420 ISI 316L, 420, 630 ISI 316L, 420, 630 ISI 316L, 420, 630 ISI 302 ISI 302 ISI 302 ISI 302 ISI 302 HNR (buna) FKM (viton) HNR (buna) FKM (viton) HNR (buna) FKM (viton) HNR (buna) FKM (viton) HNR (buna) FKM (viton) S LIX ISI 316L ISI 630, ISI ISI 302 HNR (buna) FKM (viton) 3 EX-ROOF SOLENOIDS: MIN D VLVE YE Solenoid code Voltage code VD Multicertification OX/W, OXS/W OKX/W, OKXS/W ULUS OULX/W, OULXS/W OKULX/W, OKULXS/W ower Multicertification 8W 25W consumption ULUS 12W 33W oil insulation rotection degree Duty factor Mechanical construction able entrance and electrical wiring Metod of protection Multicertification ULUS V 50/60 Hz ±10% ±10% lass H I /67 ccording to IE 144 when correctly coupled with the relevant cable gland XM/M Multicertification Flame proof housing classified Ex d, according to EN : 20, EN : 2007 ULUS Flame proof housing classified according to UL 1203 and UL429, S 22.2 n and S 22.2 n Internal terminal board for cable connection threaded connection for cable entrance vertical (standard) or Horizontal (option /O) emperature class mbient temperature emperature class mbient temperature DHXS6 DLHX6 DLHXS6 DLXS6 Notes: (1) 48D and 125D only for Multicertification For alternating current supply a rectifier bridge is integrated in the solenoid 12D, 24D, 48D (1), 110D, 125D (1), 220D 12, 24, , % Ex d 6 ( 85 ) 4 ( 135 ) 4 ( 135 ) 3 ( 200 ) ( 85 ) DLHMXS6 DLHXS6 DLX6 DLHX6 5 ( 100 ) DHX4 DHXS4 DLHMX4 DLHX4 3 ( 200 ) DLHXS4 DLHMXS4 4 MIN HRERISIS, SELS ND HYDRULI FLUIDS - for other fluids not included in below table, consult our technical office ssembly position / location ny position for all valves Subplate surface finishing Roughness index Ra 0,4 - flatness ratio 0,01/100 (ISO 1101) Seals, recommended fluid temperature HNR seals (standard) = , with HF hydraulic fluids = FKM seals (/E option) = Recommended viscosity mm 2 /s - max allowed range mm 2 /s Fluid contamination class ISO 44 class 21/19/16 NS 1638 class 10, in line filters of 25 mm (b10 _>75 recommended) Hydraulic fluid Suitable seals type lassification Ref. Standard Mineral oils Flame resistant without water Flame resistant with water HNR, FKM FKM HNR HL, HL, HLD, HVL, HVLD HFDU, HFDR HF DIN ISO ULUS ERIFIION ULUS marking EXMLE OF NMELE MRKING lass I = Equipment for famable gas and vapours Division 1 = ossibility of explosive atmosphere during normal functioning Groups &D = tmosphere containing flamable gas Groups II&II = Gas group 6/5 = emperature class of solenoid surface referred to +55 / + ambient temperature Marking according to UL Directive Notified body and certificate

3 6 MULIERIFIION EX, IEEx, E In the following are resumed the valves marking according to multicertifications for Group II and Group I (mining) GROU II, EX, marking II 2 G = Solenoid for surface plants with gas and vapors environment, category 2, suitable for zone 1 and zone 2 Ex d = Explosion-proof equipment II = Equipment of group II suitable for substances (gas) of group II 6/4 = Solenoid temperature class (maximum surface temperature) Gb = Equipment protection level, high level protection for explosive Gas atmospheres = Mark of conformity to the applicable European directives II 2 D = Solenoid for surface plants with dust environment, category 2, suitable for zone 21 and zone 22 Ex d = Explosion-proof equipment III = Suitable for conductive dust (applicable also III and/or III) I/67 = rotection degree 85/135 = Maximum surface temperature (Dust) Db = Equipment protection level, high level protection for explosive Dust atmospheres = Mark of conformity to the 94/9/E directive and to the technical norms GROU II, IEEx marking Ex d = Explosion-proof equipment II = Equipment of group II suitable for substances (gas) of group II 6/4 = Solenoid temperature classes (Gas) Gb = Equipment protection level, high level protection for explosive Gas atmospheres Ex tb = Equipment protection by enclosure tb III = Suitable for conductive dust (applicable also III and/or III) 85 /135 = Maximum surface temperature (Dust) Db = Equipment protection level, high level protection for explosive Dust atmospheres I/67 = rotection degree tex notified body and certificate Marking according to EX Directive IEEx notified body and certificate Marking according to IEEx Directive E notified body and certificate Marking according to EX Directive EXMLE OF NMELE MRKING 6.1 E marking E (Eursian certification) acknowledges the whole EX Directive 2014/34/EU. his certification is available only for gas environment (not for dust). II 2 G = Solenoid for surface plants with gas and vapors environment, category 2, suitable for zone 1 and zone 2 Ex d = Explosion-proof equipment II = Equipment of group II suitable for substances (gas) of group II 6/4 = Solenoid temperature class (maximum surface temperature) = Mark of conformity to the 94/9/E directive and to the technical norms 7 SOOL YE DIREIONL SOLENOID VLVES: MODEL ODE Size: 0 = DH X 4 * /2 / M / V 24D ** / * spool type - direct X = Stainless steel execution for all parts XS = Stainless steel execution for external parts emperature class, see section 4 = 4 6 = 6 (only for XS execution ) ertification type - = omit for Multicertification /UL = ULUS certification Valve configuration, see section , 63, 71, 75 (configurations 63 and 75 are available only with spool type 1/2) Spool type, see section 7.1 Series Voltage code - see section Options: = solenoid at side of port V = with handweel manual override O = horizontal cable entrance / * Seals material, see section : - = HNR Solenoid threated connection for cable gland: M = M20x1,5 UNI-4535 (6H/6g) for Multicertification N = 1/2 N NSI/SME.1 (tapered) for /UL est fluid, only for X esecution: 7.1 Hydraulic configuration 1 0 onfigurations Spools onfigurations -1* -1*/ * -3*/ Spools * /2 3 E135

4 8 OE YE LEK FREE DIREIONL SOLENOID VLVES: MODEL ODE DLH = direct (10 l/min) DLHM = direct (25 l/min) DLH = hydraulic operated DLH = solenoid piloted DL = hydraulic operated DL = solenoid piloted X = Stainless steel execution for all parts XS = Stainless steel execution for external parts emperature class (not for DLH and DL) see sect. 4 = 4 6 = 6 3 = three way DLH X 6 * - 3 / M / V 24D ** / * / * ertification type - = omit for Multicertification /UL = ULUS certification Valve configuration, see section 8.1 = () to in rest position = to () in rest position Series Voltage code - see section Options: (not for DLH, DL) R = solenoid manual reset (not combinable with /V) V = handweel manual override (not combinable with /R) O = Horizontal cable entrance Only for DL D = internal drain E = external pilot pressure Solenoid threated connection for cable gland: M = M20x1,5 UNI-4535 (6H/6g) for Multicertification N = 1/2 N NSI/SME.1 (tapered) for /UL est fluid, only for X esecution: Seals material,see section : - = HNR 8.1 Hydraulic configuration DLHX(S)*-3* DLHX(S)*-3* DLHMX(S)*-3* DLHMX(S)*-3 DLHX(S)*-3 DLHX(S)*-3 X X DLHX(S)-3 DLHX(S)-3 DLX(S)6-3 DLX(S)6-3 DLX(S)-3 DLX(S)-3 X X X Y X Y X X 9 RESSURE ONROL VLVES: MODEL ODE 9.1 Screw-in type R MX-3 / 350 / * / * ** / * / * Screw-in relief cartridge See note (1): MX(S)-3 = G1/2 MX(S)-6 = M33x1,5 REX(S)-20 =M35x1,5 ressure range: see hydraulic characteristics in table below (1): X = Stainless steel execution for all parts XS = Stainless steel execution for external parts Series Seals material, see section : - = HNR est fluid, only for X esecution: Only for ED * = factory preset regulation to be defined depending to the customer requirements min step: 1bar - min pressure setting: 25 bar (example 280 = 280 bar) Options ED = reduced leakages and certified according to 2014/68/UE Hydraulic characteristics Valve model R MX(S)-3 R MX(S)-3 /ED R MX(S)-6 R MX(S)-6 /ED R REX(S)-20 R REX(S)-20 /ED Max pressure /50 /100 /210 /50 /100 /50 /100 /210 /100 /210 /50 /100 /210 /100 /210 setting [bar] /350 /420 /210 /350 /350 /420 /350 /315 /400 /315 /400 ressure range [bar] (1) Max flow [l/min] 2,5 2, (1) he values correspond to the min and max regulation of the valve s craking pressure.

5 9.2 Modular type HM X / 350 ** / * / * Modular pressure relief valve ISO 4401 size X = Stainless steel execution for all parts XS = Stainless steel execution for external parts Series Seals material, see section : - = HNR est fluid, only for X esecution: onfiguration, see section ressure range for HM: 50 =50 bar 100 =100 bar 210 =210 bar 350 =350 bar 9.3 ontrol cover over according to ISO 7368 X = Stainless steel execution for all parts XS = Stainless steel execution for external parts Size: 2 = 25 LIMM X - 2 / 350 ** / * ressure range 50 = 6 50 bar 100= bar Series Seals material, see section : - = HNR 210= bar 350= bar / * est fluid, only for X esecution: 9.4 Standard cartridge valve to be coupled with LIMMX(S) cover S LI X / 2 ** / * / * artridge according to ISO 7368 X= Stainless steel execution for all parts Series Seals material, see section : - = HNR est fluid, only for X esecution: Size 25 rea ratio 1 1 Spring cracking pressure 1 = 0,3 bar 2 = 1,2 bar 3 = 3 bar 6 = 6 bar Note: for LIMMXS cover, the standard SLI-25* cartridge can be used 9.5 Hydraulic configuration R-*X(S) HMX(S)-011/* HMX(S)-013/* HMX(S)-014/* LIMMX(S)-2/* F X Y S LIX-2531* E135

6 10 LE GLNDS ND WIRING 10.1 able glands - only for Multicertification able glands with threaded connections M20x1,5 for standard or armoured cables have to be ordered separately, see tech. table K Ex proof solenoid wiring Multicertification ULUS certification H 3 n 4 M4x20 locking torque 4Nm H 3 M4 locking torque 4Nm Standard version Option /O Standard version Option /O cover with threaded connection for vertical cable gland fitting cover with threaded connection for horizontal cable gland fitting terminal board for cables wiring screw terminal for additional equipotential grounding standard manual override 1 = oil 2 = GND 3 = oil 3 poles terminal board suitable for wires cross sections up to 2,5 mm 2 (max WG14) ower supply: section of coil connection wires = 2,5 mm 2 Grounding: section of internal ground wire = 2,5 mm 2 section of external ground wire = 4 mm 2 Wiring specifications ower supply: section of coil connection wires = 2,5 mm 2 Grounding: section of internal ground wire = 2,5 mm 2 he additional equipotential grounding can be also performed by the user on the external facility provided on the solenoid case. Section of external ground wire = 4 mm 2 cover with threaded connection for vertical cable gland fitting cover with threaded connection for horizontal cable gland fitting terminal board for cables wiring standard manual override 1 = oil + 2 = GND 3 = oil - 3 poles terminal board suitable for wires cross sections up to 2,5 mm 2 (max WG14) (2) = alternative GND screw terminal connected to solenoid housing able Specification: ower supply and transducer cables have to comply with following characteristics Suitable for use in lass I Division 1, Gas Groups rmored Marine Shipboard able which meets UL 1309 inned Stranded opper onductors ronze braided armor Overall impervious sheath over the armor ny Listed (UVZ/ UVZ7) Marine Shipboard able rated 300 V min, 15 min. 3 2,5 mm 2 (14 WG) having a suitable service temperature range of at least -25 to +110 ( / Models require a temperature range from -40 to +110 ) For lass I wiring the 3 1,5 mm 2 WG 16 cable size is admitted only if a fuse lower than 10 is connected to the load side of the solenoid wiring. Note: a Loctite sealant type 545, should be used on the cable gland entry threads 10.3 able temperature he cable must be suitable for the working temperature as specified in the safety instructions delivered with the first supply of the products. For Multicertification Max ambient temperature [ ] emperature class Surface temperature [ ] able temperature not prescribed For culus Max ambient temperature [ ] emperature class Surface temperature [ ] able temperature

7 11 Q/Dp DIGRMS (based on mineral oil ISO VG at 50 ) DHX(S) DLHX(S) DLHMX(S) valve pressure drop [bar] valve pressure drop [bar] valve pressure drop [bar] F E D DHX(S) Flow direction DLX(S) SLIX-2531* Spool type Differential pressure [bar] 1, 1/ Flow direction Valve type ( ) ( ) DLHX(S)-3 DLHX(S)-3 DLHMX(S)-3 F E DLHMX(S)-3 E D 12 OERING LIMIS OF ON/OFF DIREIONL ONROLS (based on mineral oil ISO VG at 50 ) he diagram have been obtained with warm solenoids and power supply at lowest value (Vnom-10%). For DHX(S) valves the curves refer to application with symmetrical flow through the valve (i.e. and ). In case of asymmetric flow the operating limits must be reduced. DHX(S)4 DHX(S)6 DLHX(S)4 D DHX4 = Spools 0,1 = Spools 1/2, 3, 6, 7 DHXS4 = Spools 0,1 D = Spools 1/2, 3, 6, 7 = Spools 0,1 = Spools 1/2, 3, 6, 7 DLHX4 = Spool 3 = Spool 3 DLHXS4 = Spools 3, 3 DLHMX(S)6 DLHMX(S)* DLX(S)6 and DLX(S) D E D D E minimum piloting pressure DLHX6 = Spool 3 = Spool 3 DLHXS6 = Spool 3 D = Spool 3 DLHMX4 = Spool 3 = Spool 3 DLHMXS4 = Spool 3 D = Spool 3 DLHMXS6 E = Spool 3, 3 iloting pressure [bar] 12.1 Internal leakages for DLHX(S), DLHMX(S), DLHX(S), DLHX(S), DLX(S) and DLX(S): less than 5 drops/min (0,36 cm 3 /min) at max pressure iloting pressure for DLHX(S) and DLHX(S) max piloting pressure = 315 bar; min piloting pressure = 90 bar for DLX(S) and DLX(S) max piloting pressure = 315 bar; min piloting pressure = see above diagram

8 13 REGULED RESSURE VERSUS FLOW DIGRM of screw-in cartridge valves (based on mineral oil ISO VG at 50 ) R MX(S)-3 R MX(S)-6 R REX(S)-20 Min. regulated pressure Min. regulated pressure Min. regulated pressure R MX(S)-3 **/ED R MX(S)-6 **/ED R REX(S)-20 **/ED ERMIED WORKING RNGES of screw-in cartridge valves with ED option (shared area) R MX(S)-3 **/ED R MX(S)-6 **/ED 14 R REX(S)-20 **/ED 14.1 Regulated pressure for modular valves HMX(S)-* Min. regulated pressure Regulated pressure at port [bar] E135

9 15 INSLLION DIMENSIONS OF DHX(S) [mm] horizontal cable entrance option /O ø ISO 4401: 2005 Mounting surface: Fastening bolts: 4 socket head screws M5x50-4- ightening torque = 5,5 Nm Seals: 4 OR 108 orts,,,: Ø = 7.5 mm (max). = RESSURE OR, = USE OR = NK OR DHX(S)**-* DHX(S)**-*/V 111 Mass: 2,9 kg Mass: 3 kg 11 DHX(S)**-07* DHX(S)**-07*/V 111 Mass: 4,6 kg Mass: 4,8 kg INSLLION DIMENSIONS OF DLHX(S) ND DLHMX(S) [mm] horizontal cable entrance option /O ø ISO 4401: 2005 Mounting surface: Fastening bolts: 4 socket head screws M5x50-4- ightening torque = 5,5 Nm Seals: 4 OR 108 orts,,,: Ø = 7.5 mm (max). = RESSURE OR, = USE OR = NK OR DLHX(S)*-3/M/V DLHX(S)*-3/M 150 Mass: 3 kg 111 Mass: 2,9 kg DLHMX(S)*-3/M/R DLHMX(S)*-3/M Mass: 3,8 kg Mass: 2,9 kg

10 17 INSLLION DIMENSIONS OF DLHX(S) ND DLHX(S) [mm] ISO 4401: 2005 Mounting surface: Fastening bolts: 4 socket head screws M5x75-4- ightening torque = 5,5 Nm Seals: 4 OR 108 orts,,,: Ø = 7.5 mm (max) ø X = RESSURE OR = USE OR = not present = NK OR = ILO OR DLHX(S)-3 DLHX(S)-3 18 INSLLION DIMENSIONS OF DLX(S) ND DLX(S) [mm] Mounting surface DLX(S)6 and DLX(S) not ISO standard Fastening bolts: 4 socket head screws M10x-4- ightening torque = 40 Nm Seals: 3 OR 3081; 2 OR 108 orts,,: Ø = 16 mm (max) orts X, Y: Ø = 7 mm (max) DLX(S)6-3/M DLX(S)6-3/M (dotted line) DLX(S) Mass: 5 kg 109 DLHX(S)-3 DLHX(S) (culus) (culus) option /O option /V DLX(S) Mass: 5 kg (culus) E135

11 19 INSLLION DIMENSIONS OF SREW IN RESSURE RELIEF VLVES [mm] R MX(S)-3/* R MX(S)-6/* R REX(S) dotted line only for option /ED dotted line only for option /ED dotted line only for option /ED Nm 140 Nm 60 Nm ø26 ø26 Note: for cavity dimensions see table 010 section 11 ø INSLLION DIMENSIONS OF MODULR ND RRIDGE VLVES ISO 4401: 2005 Mounting surface: Fastening bolts: M5x**-4- ightening torque = 5,5 Nm Seals: 4 OR 108 orts,,,: Ø = 7.5 mm (max) HMX(S)-011/* LIMMX(S)-2/* Mass: 1,4 kg Mass: 2,2 kg over interface dimensions for LIMMX(S)-2 HMX(S)-013/* Mass: 1,2 kg Recess dimensions for S LIX-25 HMX(S)-014/* Mass: 1,2 kg 09/17

DHAX(S) and DLAHX(S) valves are SIL compliance with IEC (TÜV certified) - see section 1.1 T6, T4 T4, T3 8 W 25 W (2) T4 8 W 25 W 8 W 25 W

DHAX(S) and DLAHX(S) valves are SIL compliance with IEC (TÜV certified) - see section 1.1 T6, T4 T4, T3 8 W 25 W (2) T4 8 W 25 W 8 W 25 W able E135obs/E Stainless steel valves for corrosive environments & water base fluids ex-proof solenoid valves, Multicertification EX, IEEx, E or ULUS certification UL certified valves are obsolete components

More information

Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC

Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC www.atos.com Table -2/E Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification TEX, IEEx, E valve body spool ex-proof solenoid ex-proof inductive

More information

Stainless steel valves for corrosive environments & water base fluids

Stainless steel valves for corrosive environments & water base fluids www.atos.com Table E135-10/E Stainless steel valves for corrosive environments & water base fluids explosion-proof soleid valves, with tex, IEEx or UL US certification and pressure relief valves LOHX(S)6-3/M-O/V

More information

Intrinsically safe solenoid valves on/off controls - ATEX certification

Intrinsically safe solenoid valves on/off controls - ATEX certification www.atos.com Table E130-17/E Intrinsically safe solenoid valves on/off controls - ATEX certification valve body valve spool intrinsically safe solenoid electrical connector manual override DHW-0611/WP/6

More information

Hand & mechanical directional valves

Hand & mechanical directional valves www.atos.com Table E5-3/E Hand & mechanical directional valves ISO 44 sizes 6,, 6 and 25 H- Hand & mechanical operated directional valves are spool type, three or four way, two or three position valves,

More information

Explosion-proof solenoid valves on/off and proportional controls - UL certification

Explosion-proof solenoid valves on/off and proportional controls - UL certification www.atos.com Table E125-10/E Explosion-proof solenoid valves on/off and proportional controls - UL certification DLHZ-T-040 valve body ex-proof solenoid ex-proof transducer (only for proportional -T valves)

More information

Explosion-proof solenoid valves on/off and proportional controls - ATEX or Rostechnadzor Russian certification

Explosion-proof solenoid valves on/off and proportional controls - ATEX or Rostechnadzor Russian certification www.atos.com Table E120-22/E Explosion-proof solenoid valves on/off and proportional controls - TEX or Rostechnadzor Russian certification DLHZ-T-040 valve body ex-proof solenoid ex-proof transducer (only

More information

Function. Valve Size. Pilot Oil. p min. Bold: Designates Tier I products and options.

Function. Valve Size. Pilot Oil. p min. Bold: Designates Tier I products and options. Catalog HY14-255/US echnical Information ilot Operated ressure Reducing Valves Series VMY*6 General Series VMY*6 valves consist of the main stage with valve spools and the pilot stage with the proportional

More information

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US

More information

Cooler-Bypass Thermostat Valve, Size 16

Cooler-Bypass Thermostat Valve, Size 16 Cooler-Bypass hermostat Valve, Size Q max = l/min, p max = bar emperature-controlled, integral relief function, various pressure settings available Description emperature-dependent bypass control Integral

More information

Electrically Operated Pressure-Relief Cartridge, Size 10

Electrically Operated Pressure-Relief Cartridge, Size 10 Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description

More information

3-Way Pressure-Reducing Cartridge, Size 2 4

3-Way Pressure-Reducing Cartridge, Size 2 4 -Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is

More information

Proportional Throttle Cartridges, Size 16

Proportional Throttle Cartridges, Size 16 Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact

More information

Inverse Proportional Pressure-Relief Cartridge, Size 10

Inverse Proportional Pressure-Relief Cartridge, Size 10 Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size

More information

Ex-proof proportional valves with integral digital drivers with or without integral position or pressure transducer - ATEX or IECEx certification

Ex-proof proportional valves with integral digital drivers with or without integral position or pressure transducer - ATEX or IECEx certification Table F650-/E Ex-proof proportional valves with integral digital drivers with or without integral position or pressure transducer - ATEX or IECEx certification valve body ex-proof solenoid ex-proof position

More information

Inverse Prop. Pressure-Relief Cart., Size 2 4

Inverse Prop. Pressure-Relief Cart., Size 2 4 Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in

More information

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Proportional Pressure-Relief Cartridge Valve, Size 2...4 Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting

More information

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Proportional Pressure-Relief Cartridge Valve, Size 2...4 Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional

More information

Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.

Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics. Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum

More information

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08 Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size

More information

Pressure-Relief Cartridge Valve, Size 4

Pressure-Relief Cartridge Valve, Size 4 Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure

More information

Auxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998

Auxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998 Auxiliary valve Sequence valve, 3-way Catalogue 9129 8542-02 (GB) 9129 8542-06 (US) October 1998 Sequence valve, 3-way Applications The sequence valve is designed to open or close a hydraulic pilot signal

More information

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4 Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges

More information

Check valve hydraulically pilot operated

Check valve hydraulically pilot operated Check valve hydraulically pilot operated RE 6/7.5 Replaces:. / Types SV and SL Nominal sizes to Component series X Maximum operating pressure 5 bar Maximum flow 55 l/min H555 Overview of contents Contents

More information

INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking:

INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking: direct operated INVERSE function available Q max = 2 l/min p max = bar INVERS Description EPDB The direct operated proportional pressure relief valve is built as a slip-in cartridge fitted in a connecting

More information

3-Way Safety Block DSV

3-Way Safety Block DSV 3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with

More information

DNS. Monoblock directional control valves DNS - Directional control valve

DNS. Monoblock directional control valves DNS - Directional control valve Monoblock directional control valves DNS - Directional control valve DNS efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES 398SMD6I - 6--8 DNS echnical data Nominal flow

More information

P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES

P2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES 52 000/110 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by

More information

Axial piston pumps type PVC

Axial piston pumps type PVC www.atos.com Table TA16-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low noise

More information

Axial piston pumps type PVC

Axial piston pumps type PVC www.atos.com Table TA16SK-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low

More information

Double Pilot Operated Cartridge Check Valve, Size 8

Double Pilot Operated Cartridge Check Valve, Size 8 Double Pilot Operated Cartridge Check Valve, Size 8 Q max = 7 l/min (19 gpm), p max = 35 bar (5 psi) pilot operated, two-stage, spring-closed cartridge-type poppet valve Compact design for cavity type

More information

Pressure relief valve, direct operated Type DBD

Pressure relief valve, direct operated Type DBD Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly echnologies neumatics Service Automation Mobile Hydraulics RE 25 402/06.02 Replaces: 03.98 Material No.: 00772632a ressure

More information

V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability

V83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing

More information

Pressure reducing/relief valve, pilot operated type UZCP10

Pressure reducing/relief valve, pilot operated type UZCP10 ressure reducing/relief valve, pilot operated type UZC10 NS10 up to 1, Ma up to 80 dm /min D SHEE - OER RION MNU NUL WK 420 280 07.2014 LICION he pressure reducing/relief valve type UZC10 pilot operated

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure a secondary part of a hydraulic circuit. Pressure is mataed

More information

PRESSURE SEQUENCE VALVE TYPE UZK

PRESSURE SEQUENCE VALVE TYPE UZK PRESSURE SEQUENCE VALVE TYPE UZK Size 10, 20, 30 31,5 MPa up to 450 dm 3 /min WK 450 414 04. 2000r. Pressure sequence valves type UZK are used for switching a system or part of a system off when a set

More information

Valvex Valves for Mining Applications

Valvex Valves for Mining Applications Valvex Valves for Mining pplications roven technology The Electronic Drive Systems product group at Voith Turbo GmbH & Co. KG develops and produces explosion-proof Valvex solenoid valves and valve assemblies.

More information

Pressure relief valve, direct operated

Pressure relief valve, direct operated ressure relief valve, direct operated R 25402/05.0 Replaces: 10.05 /1 ype DBD Nominal sizes to 0 Component series 1X Maximum operating pressure 0 bar Maximum flow 0 l/min H5585 Overview of contents Contents

More information

Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)

Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm) Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min

More information

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces

More information

2/2-way proportional valve

2/2-way proportional valve 2/2-way proportional valve High sensitivity Type can be combined with 0... 16 bar DN 0.8... 4 mm 1/8, 1/4 or sub-base EEx approvals optional Type 8605 Digital control electronics Cable plug version Type

More information

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP) 4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31

More information

Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1

Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Size

More information

Pneumatic spool valve islands

Pneumatic spool valve islands Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their

More information

Pump safety block. Type DBA, DBAW, DBAE(E) Features. Contents. RE Edition: Replaces: 11.10

Pump safety block. Type DBA, DBAW, DBAE(E) Features. Contents. RE Edition: Replaces: 11.10 ump safety block ype D, DW, DE(E) RE 25891 Edition: 2013-05 Replaces: 11.10 Size 16, 25, 32 Component series 2 Maximum operating pressure 350 bar Maximum flow 400 l/min H5872 Features Depressurized start-up

More information

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min

More information

PLD 03 T A CASAPPA S.p.A.

PLD 03 T A CASAPPA S.p.A. GEAR FLOW DIVIDERS INDEX Section Page GENERAL FEATURES... 3 GENERAL DATA... 5 FLOW EQUALIZER... 6 FLOW DIVIDERS... 8 TYPICAL CIRCUITS... 10 NOTES ABOUT COMPOSITION... 12 PORTS DIMENSIONS.... 14 GROUP DIMENSIONS...

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System Sectional Design and Flow Sharing rinciple Reference: 31--959-EN-3 Stand: 9.216 1/2 2/2 31--959-EN-3/9.216 Contents age 1 General... 5 1.1 Description... 5 1.2 Advantages...

More information

Pilot valve PPCD04-PPRV DATA SHEET

Pilot valve PPCD04-PPRV DATA SHEET CLSSIC ilot valve CD4-RV D SHEE 294 297 Description SVB pilot valve is a small smooth valve, based on homas Magnetes propotional pressure reducing valve, that controls a limited-flow control feed to a

More information

005 Series Modular Valves

005 Series Modular Valves 5 Series Modular Valves ype of Modular Valve Class Graphic Symbols age Solenoid Operated Directional Valve DSG-5- *** - * - ressure Control Valves Flow Control Valves Directional Control Valves Modular

More information

Dual displacement motor A10VM Plug-in dual displacement motor A10VE for open and closed circuit applications

Dual displacement motor A10VM Plug-in dual displacement motor A10VE for open and closed circuit applications Replaces: 04.95 Dual displacement motor 10VM Plug-in dual displacement motor 10VE for open and closed circuit applications Size 28-60 Series 5 Nominal pressure 280 bar Peak pressure 350 bar 10VM Contents

More information

Digital relief valves D-CG

Digital relief valves D-CG Digital relief valves D-G unctional Symbols D-G- Specifications Size Maximum working pressure Rated flow Maximum flow Maximum adjustable pressure Ma Minimum control pressure Hysteresis Repeatability emperature

More information

Directional Controls

Directional Controls Vickers Directional Controls Directional Control Valves DG3V-3-*-60 Hydraulic Operated DG17V-3-*-60 Lever Operated DG18V-3-*-60 Air Operated DG20V-3-*-60 Cam Operated DG21V-3-*-60 Plunger Operated CETOP

More information

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 D68 Series roportional Control Valves with Integrated Electronics ISO 441 Size 5 to 1 GENERL D681- D685 SECION GE MOOG SERVO- ND ROORIONL CONROL VLVES General 2 enefits and Functionality 3 General echnical

More information

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing

More information

Solenoid valves VZWF, force pilot operated

Solenoid valves VZWF, force pilot operated Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is

More information

Displacement 12, , Maximum flow rate (at 1450 rpm) bar.

Displacement 12, , Maximum flow rate (at 1450 rpm) bar. 00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment

More information

4/2 way Pneumatic Solenoid Valve

4/2 way Pneumatic Solenoid Valve 4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11

More information

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10 / ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications

More information

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 10 DP Nominal size 10 Series 4X Maximum reduced pressure 210 bar (3050 PSI) Maximum flow 80 L/min

More information

SDM to 8 sections monoblock valve D1WWDA02A

SDM to 8 sections monoblock valve D1WWDA02A SDM 1 SDM1 1 to 8 sections monoblock valve D1WWDA2A SDM1 Additional information This folder shows the product in the most standard configurations. Please contact Sales Dpt. for more detailed information

More information

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for Excavators Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

More information

Leak-Free Load-Control Valve SAE ½ psi flange

Leak-Free Load-Control Valve SAE ½ psi flange Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control

More information

Pressure reducing valve, pilot operated

Pressure reducing valve, pilot operated Pressure reducing valve, pilot operated RE 26928/09.07 Replaces: 10.97 1/8 Type 3DR Size 16 Component series 5X Maximum operating pressure 250 bar Maximum flow 220 l/min H5844 Table of contents Content

More information

Monoblock directional control valves ML - Directional control valve

Monoblock directional control valves ML - Directional control valve Monoblock directional control valves ML - Directional control valve ML Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD4I - 6--8 ML echnical data Nominal flow

More information

180 Series Rotary Shear Directional Control Valve

180 Series Rotary Shear Directional Control Valve 180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44

More information

2/2-way proportional valve

2/2-way proportional valve 2/2-way proportional valve General purpose 0... 12 bar DN 0.8... 2.0 mm 1/8 or sub-base version Type 2824 can be combined with Type 805 Digital control electronics DIN-rail version Type 07 Cable plug Typ

More information

Safety and Shut-off Block SAF/DSV

Safety and Shut-off Block SAF/DSV Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety

More information

Directional spool valves type WE6 electrically. operated type WE6 series 32

Directional spool valves type WE6 electrically. operated type WE6 series 32 Directional spool valve electrically operated type WE6 series NS 6 up to 1,5 Ma up to 80 dm /min WK 40 970 06.011 LICION Directional spool valves type WE6 electrically operated are intended for change

More information

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31. F MODULES YUKEN's Modular Valves are stack type valves, and require no piping. hey not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking

More information

RP series Rotor Pumps

RP series Rotor Pumps ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting

More information

VSD03M DIRECTIONAL CONTROL VALVES

VSD03M DIRECTIONAL CONTROL VALVES NFPA SIZE D03 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e.

More information

Pressure relief valve, direct operated

Pressure relief valve, direct operated Pressure relief valve, direct operated RE 570/0.05 Replaces: 06.03 /8 Type DBD..K Size Component series X Maximum operating pressure 500 bar Maximum flow 0 l/min K9- Table of contents Contents Page Features

More information

Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)

Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm) Vickers Cartridge Valves Load Controls Screw In Cartridge Valves Pressures to 50 bar (5000 psi) Flows to 90 l/min (50 USgpm) Rev. 2/99 722 Contents MODEL DESCRIPTION TYP. APPLICATION PRESSURE bar (psi)

More information

Directional Controls

Directional Controls Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................

More information

Safety and Shut-off Block SAF/DSV

Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with

More information

D62 - D63 Directional Control Valve l/min

D62 - D63 Directional Control Valve l/min D62 - D63 Table of Contents 1 1.1 1.2 Product Description... 2 Function... 2 Properties... 2 2 Technical Data... 3 3 3.1 3.2 Ordering Information... 4 Type code... 4 Versions currently available... 4 4

More information

Pressure reducing valve, pilot operated, Model 3DR

Pressure reducing valve, pilot operated, Model 3DR RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features

More information

Pressure relief valves

Pressure relief valves Pressure relief valves Type DV700 Features Direct operated valve High degree of pressure stability Safe operation Precise pressure adjustment Maximum pressure setting with lock nut Applications as cartridge

More information

Leak-Free Load-Control Valve, Size 20

Leak-Free Load-Control Valve, Size 20 Leak-Free Load-Control Valve, Size 20 Qmax = 350 l/min [92 gpm], pmax = 420 bar [6000 psi] leak-proof, two-stage hydraulic, manifold mounting 20--P... 1 Description Whenever large loads are to be precisely

More information

SOLENOID VALVES AND PNEUMATIC VALVES

SOLENOID VALVES AND PNEUMATIC VALVES 9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated

More information

Operating Instructions

Operating Instructions LPL Series LED Pendant Lighting Operating Instructions IM0102 COOPER Electronic Technologies (Shanghai) Co., Ltd. No. 955 Shengli Road, East Area of Zhangjiang High-Tech Park, Shanghai 201201 China 1.

More information

MOUNTING SURFACE MOUNTING POSITION MAXIUMUM OPERATING PRESSURE FLUID OPERATING VISCOSITY FLUID CLEANLINESS HYSTERESIS REPEATABILITY THRESHOLD VOLTAGE

MOUNTING SURFACE MOUNTING POSITION MAXIUMUM OPERATING PRESSURE FLUID OPERATING VISCOSITY FLUID CLEANLINESS HYSTERESIS REPEATABILITY THRESHOLD VOLTAGE TYPICAL PERFORMANCE SPECIFICATIONS DESCRIPTION These proportional valves are direct operated pressure reducing valves. They can be used to control pressure in parts of a circuit. This valve incorporates

More information

E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm

E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:

More information

Fitted with a main pressure relief valve and a load check valve on every working section.

Fitted with a main pressure relief valve and a load check valve on every working section. SDS18 1 to 12 sectional directional control valve Fitted with a main ressure relief valve and a load check valve on every working section. Available with arallel and series-arallel (tandem) circuit. Otional

More information

Pneumatic valve islands

Pneumatic valve islands Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented

More information

2-way flow control valve Model 2FRM 6

2-way flow control valve Model 2FRM 6 R 28 6/0.98 Replaces R 28 62/05.94 R 28 6/06.98 2-way flow control valve Model 2FRM 6 Nominal size 6 Series X Maximum operating pressure 4569 SI (5 bar) ) Maximum flow 8.45 GM (2 L/min) H//D 585/97 + H//D

More information

SystemStak Valves. ISO4401 Size 02

SystemStak Valves. ISO4401 Size 02 SystemStak Valves ISO441 Size 2 Reduce System Space Requirements SystemStak valves make compact hydraulic systems in which specific function valves are sandwich mounted between a directional valve and

More information

Series 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position

Series 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position 3 Cv =.73-2.00 Series 4 Cv=.73-2.00 Air-Pilot operated valves Series 4: 1/8,, 3-way/2-position; 5-way/2-position; 5-way/3-position 1/2 5-way/2-position The pneumatically operated,3-way/2-position, 5-way/2-position

More information

D e s c r i p t i o n

D e s c r i p t i o n MPS Series D e s c r i p t i o n The MPS spin-on filter series is a complete product range suitable, for both suction and return applications. Utilising spin-on canisters, the MPS series are quick and

More information

VICKERS. SystemStak Valves. ISO ; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B

VICKERS. SystemStak Valves. ISO ; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B VICKERS SystemStak Valves ISO 441-3; NF-D3; 315 bar (45 psi); 6 L/min (15.7 USgpm) 1 G 227 uild a Compact, Cost-Effective, Reliable Hydraulic System with Vickers SystemStak Valves Reduces System Space

More information

Electro-hydraulic Proportional Flow and Direction Control Valve

Electro-hydraulic Proportional Flow and Direction Control Valve lectro-hydraulic control valve his valve uses a D solenoid in a traditional 4- way solenoid valve to create a solenoid valve capable of both direction switching and highspeed control. he lineup consists

More information

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10

D680 Series Proportional Control Valves with Integrated Electronics ISO 4401 Size 05 to 10 D68 Series roportional Control Valves with Integrated Electronics ISO 441 Size 5 to 1 GENERL D 6 8 1 - D 6 8 5 SECION G E MOOG SERVO- ND ROORIONL CONROL V LV E S General 2 enefits and Functionality 3 General

More information

Pressure switch KP-E. Data sheet

Pressure switch KP-E. Data sheet Data sheet Pressure switch KP-E KP-E pressure switches for use in refrigeration and air conditioning systems are equipped with SPDT gold plated contacts and stainless steel bellows. The high pressure switches

More information

2/2-Way Solenoid Control Valve

2/2-Way Solenoid Control Valve 2/2-Way Solenoid Control Valve Excellent range (1:200) Very good response Compact valve design Orifice sizes 0.05... 2.0 mm ort connection 1/8 or sub-base Type 2871 can be combined with Type 8605 Digital

More information

MV-01. Features. 2/2-way Solenoid Valve for Fluids. Description: Application:

MV-01. Features. 2/2-way Solenoid Valve for Fluids. Description: Application: MV-01 2/2-way Solenoid Valve for Fluids Description: Features / Nominal diameters 1/4-2 / Pressure up to 10 bar / 24 V DC and all common AC variants / Forced-lifting The pilot-controlled full-way valve

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE www.phphyds.com Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Sizes 28...355 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement plug-in

More information