Corrugated Hose Loop Calculations
|
|
- Aleesha Potter
- 6 years ago
- Views:
Transcription
1 Corrugated Hose Loop Calculations The loop installation is one of the most common application for metal hoses. It allows the flexible hose assembly to work properly. Care must always be exercised to ensure that point F and M always move in the same line so that the hose assemblies are not subjected to torque. Mode: variable radius loop Point M motion is horizontal Data: F : fixed reference point M : movable point D = MM : M displacement E = 2R : minimum horizontal distance between F and M a : eventual level difference between F and M Examples of use: refer to the first mode: Problem: live strength of a some hose Ø braid, conveying fuel oil at 120 o C and 20 bar pressure, for an installation where D = 500mm, E = 600mm, ā = 150mm (F located under MM ) Solution: the following gives minimum bending radius:
2 Mode: constant radius loop Point M motion is vertical Note : a can be eventually negative. Mode: horizontal constant radius loop Point M motion is vertical Very important note: This hardly recommended installation mode requires setting holders on the whole lower part of the hose. To get the overall length L it is necessary, of course, to take into account not only the loop live length, but also the lengths of the fittings and of the end parts of the hose considered as not flexible.
3 Corrugated Hose Offset Calculations The installation as illustrated hereunder, economical and requiring little space, is generally used: for compensating misalignments between rigid hoses (static use), In case of expansions (appreciable amplitude, low frequency), And so on.. The equations which enable calculation of the main dimensions of this installation are given hereunder. The bending radius R which is mentioned must not be less than the minimum bending radius corresponding to conditions of use and to selected hose. The angle θ must be included within following limits: frequent offsets (Y) or double offsets (2Y) : θ < 20 o infrequent offsets (Y) : θ < 36 o permanent misalignments only : θ < 60 o For θ < 14 o, P and U can practically be the same. For θ > 14 o, it is important not to confound the live length U and the projected length P, specially in the case of the flexible braided hoses. It is necessary, of course, to take into account not only the lengths of the fittings themselves but also of the end parts of the hose considered as not flexible. overall hose length = U + A + B overall projected length = dimensions of installation = P + A + B. Pressure Loss in Metal Hoses When planning piping systems, the pressure loss of the medium is important, in addition to the hose pressure resistance and flexibility. At equal flow rates the pressure loss is higher in metal hoses than rigid piping. This is caused by the corrugations. As a rough estimate, it can be assumed that the pressure loss in corrugated hoses is 100% higher than in new welded steel pipes and in stripwound hoses it is 20% higher. This means that in case of corrugated hoses an increase in diameter of 15% and in stripwound hoses 4% is sufficient to reduce the pressure loss to the same value as new steel pipe.
4 Guide to Correct Installation Allow flexibles to hang naturally from end fittings. Avoid short radii and S-bends. Keep fitting ends or flanges parallel. Do not be tempted to use a shorter-than-recommended length. Use pipe hangers so that no weight is carried by the flexibles. Protect outer braid or tubing with non-flammable material if welding nearby. NEVER put valves between flexibles and equipment. Locate valves only at the piping end. Install the unit to the exact normal length. Avoid compressing or stretching. Line up bolt holes of mating flanges accurately. A floating flange on one end of a connector will simplify installation. Always use two wrenches to prevent torque when a flexible connector with screwed ends is being fitted. Anchor the flexible securely at the piping end - NEVER at the equipment end. Restrict motion to a single plane. Use pre-bent units to handle multiple movements. CORRECT INCORRECT DO NOT TORQUE Torque, or twisting, is damaging to flexible metal tube. To avoid this condition use either a union or floating flange at one end in place of a rigid connection. Always install corrugated hose so that movement originates in the same plane as the centre-line.
5 CORRECT INCORRECT AVOID OVERBENDING To reduce bending at end connections we suggest an interlock guard be installed on the ends of the assembly. Corrugated hose should not be bent to a radius smaller than recommended in the specifications, or fatigue and premature failure will occur. Choy Hong Private Limited Block 3018, #02-05, Bedok North Street 5, Eastlink, Singapore Tel: Fax: sales@choyhong.com Website:
PLEASE NOTE: Pressures for 200mm (8ins) and 250mm (10ins) are based on the use of METALFLEX Braided Braid
METCONAB B-FLEX Stainless Steel Annular Convoluted Hose. A close pitch hose with a high degree of flexibility suitable for most applications and normally supplied. BRAID Single or double layers of Stainless
More informationHose Assembly Live Length Calculation Guide
Hose Assembly Live Length Calculation Guide www.hosemaster.com (800) 221-2319 Cleveland Houston Atlanta Reno Length Calculations Live Length Overall Length To calculate the proper length of a hose assembly,
More informationFlexible Metal Hose Products
Flexible Metal Hose Products Specialty Flexible Hose Solutions of Stainless Steel The AEROCOM Advantage Aerocom offers engineered solutions that address specific flexible piping challenges such as vibration,
More informationSTAINLESS STEEL CORRUGATED HOSE & STRIPWOUND Product Guide
02 STAINLESS STEEL CORRUGATED HOSE & STRIPWOUND Product Guide 2.02 COMPANY PROFILE Pacific Hose Flex Our office and factory is situated in South East Queensland, Australia. With expertise of over 25 years
More informationNorth American 8773 Braided Flexible Connections
Combustion North American 8773 Braided Flexible Connections Bulletin 8773 8773 Flexible braided hoses for gas, oil, steam, compressed air and oxygen service are ideal for applications requiring a high
More informationGuide for Evaluating Your Hose Assembly Supplier
Guide for Evaluating Your Hose Assembly Supplier Supplier Evaluation Checklist, and How to Clearly Define Application Requirements Safe, reliable hose assemblies require appropriate specification work
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationTHERMAL EXPANSION: AXIAL MOVEMENT SEISMIC MOVEMENT: ALL DIRECTIONAL
H O W T H E M E T R A L O O P W O R K S THERMAL EXPANSION: AXIAL MOVEMENT THERMAL EXPANSION: The MetraLoop is simply a flexible variation of the tradition hard pipe loop. For any given length of pipe and
More informationRapidmain Installation Guide
Rapidmain Installation Guide Aluminium Compressed Air Pipe Work Installation Guide Trafalgar Court, Waterloo Ind Estate, Widnes Cheshire. UK. Ref: Rapidmain installation guide 4b Index 1. Rapidmain fittings:
More informationChapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum
Chapter 2 Rigging Cutting Wire Rope The wire rope must be tightly seized on both sides of the point where the wire rope will be cut, as shown in Figure 2-1. Seize the wire rope with either seizing wire
More informationFlexible Gas Hose Installation and Operating Instructions To be left with the operator after installation
Flexible Gas Hose Installation and Operating Instructions To be left with the operator after installation KM39643 Flexible Gas Hose Installation and Operating Instructions! WARNING Please read the following
More informationStructural Design of Tank Weighing Systems
Structural Design of Tank Weighing Systems 1. Initial observations Some essential rules must be followed when installing load cells in tanks. For example, tanks are frequently subject to weather conditions
More informationOperating instructions Pitot Static Tube
Operating instructions Pitot Static Tube halstrup-walcher GmbH Stegener Straße 10 D-79199 Kirchzarten, Germany Phone: +49 (0) 76 61/39 63-0 Fax: +49 (0) 76 61/39 63-99 E-mail: info@halstrup-walcher.de
More informationMaterial Handling Hose
Novaflex 5000 Slurry King Hose Pure Gum Liner Tough, versatile alternative to inflexible, cumbersome steel tubing. The easy handling and reusable quick-fastening flange system make installation a snap.
More informationFlexible hoses - Non-metallic materials
CLASS PROGRAMME Type approval DNVGL-CP-0183 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationA joint reliance POLIFLEX-T PTFE FLEXIBLE JOINT PFT-0105
A joint reliance POLIFLEX-T PTFE FLEXIBLE JOINT P O L I F L E X - PFT-05 POLIFLEX-T PTFE FLEXIBLE JOINT FEATURES Polytetrafluoroethylene (PTFE) hose has solved the short life problem of metall with most
More informationInstallation Operating Instructions for Simple Duplex Manual Manifolds PX-TSD Series
Introduction Powerex manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists of a regulator
More informationTorque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
More informationTOWER INSPECTION REPORT
3010 S. Hwy 77, Suite 600 Waxahachie, Texas 75165 http://ctctower.com Office: 972/923-9504 Fax: 972/923-9619 TOWER INSPECTION REPORT PREPARED FOR MR. CUSTOMER 1,563 GUYED TOWER NEAR CITY, STATE JANUARY
More informationPHYS 101 Previous Exam Problems
PHYS 101 Previous Exam Problems CHAPTER 14 Fluids Fluids at rest pressure vs. depth Pascal s principle Archimedes s principle Buoynat forces Fluids in motion: Continuity & Bernoulli equations 1. How deep
More informationModel PIV UL/FM Post Indicator Valve. Maintenance and Operation Manual UL/FM Post Indicator Valve Configuration AWWA C515
Model 2010 -PIV UL/FM Post Indicator Valve Maintenance and Operation Manual UL/FM Post Indicator Valve Configuration AWWA C515 2 LAYOUT AND SITING At the design stage, it should be considered where valves
More informationKOBOLD KSM FLOWMETER. User Instructions
KOBOLD KSM FLOWMETER User Instructions USA 1801 Parkway View Drive Pittsburgh, PA 15205 PH 412-788-2830 Canada 9A Aviation Point Claire, QC H9R 4Z2 PH 514-428-8090 www.koboldusa.com KSM_manual_08-10 Table
More informationPUNE TECHTROL PVT LTD. Instruction and Maintenance Manual for Float and Tape Gauge FTG
PUNE TECHTROL PVT LTD Instruction and Maintenance Manual for and Tape Gauge FTG INSTALLATION, OPERATION AND MAINTENANCE MANUAL FOR FLOAT AND TAPE GAUGE FTG 1 Introduction : It is used to measure and indicate
More informationGUKO FDA. einfach. gut. beraten.
GUKO FDA Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-25 C + 90 C Max Pressure : 16 Bars Specifications : Absorb vibrations and noise Linear and angular compansion Inner
More informationIMPORTANT: RECEIVING INSTRUCTIONS:
Instruction Sheet Sidewinder Mechanical Bender IMPORTANT: RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage is found, notify carrier at once.shipping damage
More informationAccessories. Flexible Compensators FN & ESA FLEX & INOXESTENS (E5603 rev /03/2015)
Accessories Flexible Compensators FN & SA FLX & INOXSTNS (5603 rev. 03-23/03/2015) GNRAL WARNINGS: DISPOSAL: ¾ All installation, maintenance, ignition and setting must be performed by qualified staff,
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationDeluxe Gourd Racks I D E G A. Parts List. Shown above are parts for the two-level, Deluxe Gourd Rack (DGR 12V)with 12 arms for vertically hung gourds.
Deluxe Gourd Racks H F K I D E J C G A Shown above are parts for the two-level, Deluxe Gourd Rack (DGR V)with arms for vertically hung gourds. Parts List Code Quantity A B C D E F G H I J 6, or 4 6, or
More informationRubber Dock Hose care, Use & Maintenance
Rubber Dock Hose care, Use & Maintenance Prepared by: Thomas J. Wise VP Corporate Development Contents Revised - July. 2014 1. Novaflex Rubber Dock Hose Testing & Inspection Program 1.1 Introduction -
More informationEngineering Data Sheet
Page 1 of 6 CE MARKING AND THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC Valves must be installed into a well designed system and it is recommended that the system be inspected in accordance with the appropriate
More informationINSTALLATION, OPERATION AND MAINTENANCE GUIDE
INSTALLATION, OPERATION AND Placement in Pipeline System When installing Process Development & Control s ElastoTITE Elastomer-Hinged Check Valves in a pipeline, a minimum of five pipe diameters should
More informationPush-In Fitting Type Pressure Gauge
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 526 Compact Design. Pressure Indication by Tube Insertion into Push-In Fitting. Check Valve Silencer Controller
More informationCoiling Tube with Twist-Proof Fitting
http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem
More informationUnit 1, Fullerton Road Rotherham S60 1DJ. Tele: Fax:
Unit 1, Fullerton Road Rotherham S60 1DJ Tele: 0845 601 333 6 Fax: 0845 601 333 7 info@fabricatedproducts.co.uk www.fabricatedproducts.co.uk Data Sheet 6.0 Rubber Pump Flexes All rubber bellows are suitable
More informationDESIGN AND PRE - INSTALLATION INFORMATION
DESIGN AND PRE - INSTALLATION INFORMATION Installation of valves should be in accordance with The Water Supply (Water Fittings) Regulations 1999 and BS6700:1997 Para. 2.2.4 KP Type Valves offer a flexible
More informationMaterials : Dichromate zinc plated steel flanges or AISI 316
Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-35 C + 90 C Max Pressure : 16 Bars (10 bars at 90 C) Specifications : Absorb vibrations and noise Linear and angular compansion
More informationVibration isolation system 1VIS10W. User manual
Vibration isolation system 1VIS10W User manual Standa 2014 Table of contents 1. General information 3 1.1. Introduction 3 1.1.1. Safety 5 1.2. Location of the table 5 1.3. Air supply requirements 5 2.
More informationCLIPPARD HOSE & TUBING
3811-1-RL 1/8 O.D. Copper Material: High pressure copper Working Pressures: to 2,500 psig Static Burst Pressure: over 10,000 psig 0.062 Use With: Ferrule tubing connectors: 3810-1, 3810-2, 11923 NYT1-0403-CLT-
More informationSABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
More informationSIMPLAIR PIPING TOOL. JXT Company
SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.
More informationSUMMITTM 400 & 600. Natural Gas Barbecues. Step-By-Step Guide
SUMMITTM 400 & 600 Natural Gas Barbecues Step-By-Step Guide W E B E R W E B E R W E B E R W E B E R Summit 400 NG Summit 600 NG CANADIAN GAS ASSOCIATION R A P P R O V E D WARNING: Follow all leak check
More informationpipe connectors. General description of pipe connectors Development/Design Purpose Versions
Pipe connectors General description of pipe connectors 1 STFLEX pipe connectors, just like STFLEX rubber expansion joints, have been used for more than years as the preferred connection elements in appliance
More informationPRESSURE TANKS HANDLING & INSTALLATION INSTRUCTIONS INSTALLATION MANUAL CONTROL VALVES
PRESSURE TANKS HANDLING & INSTALLATION INSTRUCTIONS CONTROL VALVES INSTALLATION MANUAL TABLE OF CONTENTS Receiving & Handling 3 Basic Handling Continued 4 Approved Lifting Methods 5 Installing Pressure
More informationMETAL HOSE & BRAID APPLICATION & DESIGN GUIDE 2315 W. HUBBARD ST. CHICAGO, IL FAX $8.
$8.00 METL HOSE & BRID PPLICTION & DESIGN GUIDE SEE FLEXIBLE PIPE LOOP CTLOG 315 W. HUBBRD ST. CHICGO, IL 6061 800-533-104 31-738-3588 FX 31-41-637 How to Order Flexicraft Hose ssemblies Please provide
More informationChange Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design.
http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Three-way Changeover Valve Change Valve Changeover Air Direction by 90 Lightweight and Compact Design. Fine Operability and
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More informationGas Welding Hoses and connections, the weak link
Gas Welding Hoses and connections, the weak link By Leif Andersen, Technical Product Manager Welding, WSS Regulators with flashback arrestors and the shank with its welding or cutting attachment are made
More informationMetal Hose and Module 1 Metal Hose Assemblies Guide - BOA General Information - Quality Assurance - Applications - Design - Installation Instructions
Metal Hose and Module 1 Metal Hose Assemblies Guide - BOA General Information - Quality Assurance - Applications - Design - Installation Instructions 2 BOA Metal Hose and Metal Hose Assemblies Guide Metal
More informationSPWE Series. Setup Instructions. Version 2.0
SPWE Series Integrated Tank Weighing Assembly Setup Instructions Version 2.0 Load Cell Central follows a policy of continuous improvement and reserves the right to change specifications without notice.
More informationTRAVSMART permanent single-cable horizontal lifeline system
The Travsmart single-line system provides a smooth travel. It allows the traveler to move freely over the intermediate anchors, minimizing wear and eliminating user assistance. The user s hands remain
More informationWater Separators Installation & Operating Instructions THE SCIENCE OF SILENCE. Water Separators Installation & Operating Instructions 1
Water Separators Installation & Operating Instructions THE SCIENCE OF SILENCE Water Separators Installation & Operating Instructions 1 Water Separators Correct installation is vital to safety and to avoid
More informationAYLESBURY 'KB' TYPE FLOAT VALVES
PRE-INSTALLATION CHECKS AYLESBURY Valves are unlike any other float operated valve, ballcock or ball valve. Please read these instructions and refer to attached drawings before installation. Installation
More informationBIO GAS STORAGE TANKS. for each Plant Design. Long service life. Maintenance free set-up. Permanently gas-tight. Quickly installed
Long service life Maintenance free set-up BIO GAS STORAGE TANKS for each Plant Design Permanently gas-tight Quickly installed High operational reliability Suitable for heavy wind and snow loads Volume
More informationWafer Check Valve. Contents. User s Manual. (1) Be sure to read the following description of our product warranty 1
Serial No. H-V066-E-3 Wafer Check Valve User s Manual Contents (1) Be sure to read the following description of our product warranty 1 (2) General operating instructions 2 (3) General instructions for
More informationMaterials : Dichromate zinc plated steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-35 C + 130 C Max Pressure : 16 Bars up to DN150, 10 bars over Specifications : Absorb vibrations and noise Linear and angular
More informationFRONT DERAILLEUR 10/11x3
FRONT DERAILLEUR 10/11x3 1 - TECHNICAL SPECIFICATIONS 52 52 2 - COMPATIBILITY WARNING! Different combinations from those included in the table could cause the malfunction of the drivetrain and result in
More informationOPENINGS AND REINFORCEMENTS 26
ASME BPVC.VIII.1-2015 UG-35.2 UG-36 (4) It is recognized that it is impractical to write requirements to cover the multiplicity of devices used for quick access, or to prevent negligent operation or the
More informationDeclaration of Performance (DOP)
Declaration of (DOP) No. 9174 061 DOP 2017-09-22 1. Unique identification code of the product-type: Multi-wall chimney system type DW-KL-ECO 2.0 according to 2. Type, batch or serial number or any other
More informationsteam service hose EATON l-1
Introduction Page Steam Cleaning Intro...-2 Safety Tips...-3 Recommendations...-5 200...-6 Concord 250...-7 Concord 250 O.R...-8 Concord Standard Steam & Spiral...-9 EATON Industrial and Tubing Master
More informationINSTRUCTION MANUAL. January 23, 2003, Revision 0
INSTRUCTION MANUAL Model 810A In-Vitro Test Apparatus for 310B Muscle Lever January 23, 2003, Revision 0 Copyright 2003 Aurora Scientific Inc. Aurora Scientific Inc. 360 Industrial Parkway S., Unit 4 Aurora,
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. C O N S T A N T E F F O R T S U P P O R T S TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2012 www.aaatech.com 4 1 Y E A R S S E R V I N
More informationTri-Tech Medical Inc.
Introduction Tri-Tech Medical manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists
More informationShri Krishna Test House, B-70/1, Gali No. 8, New Modern Shahdara, Mansarover Park, Delhi. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 14 I. PERFORMANCE TEST 1. Domestic gas Stove for use with L.P.G. General Cl. 4, IS:5116 & Cl.4.1.1 of IS:4246 Material Cl. 5 of IS:5116 Design for Maintenance Cl. 6.2, 6.3,
More informationChain Drives. 1. As no slip takes place during chain drive, hence perfect velocity ratio is obtained
1. Introduction Chain Drives In Belt and Rope drives slipping may occur. In order to avoid slipping, steel chains are used. The chains are made up of a number of rigid links which are hinged together by
More informationLearn more at
Full scale model tests of a steel catenary riser C. Bridge 1, H. Howells 1, N. Toy 2, G. Parke 2, R. Woods 2 1 2H Offshore Engineering Ltd, Woking, Surrey, UK 2 School of Engineering, University of Surrey,
More informationIrrigation &Hydraulics Department lb / ft to kg/lit.
CAIRO UNIVERSITY FLUID MECHANICS Faculty of Engineering nd Year CIVIL ENG. Irrigation &Hydraulics Department 010-011 1. FLUID PROPERTIES 1. Identify the dimensions and units for the following engineering
More informationInstallation Operating Instructions for Duplex Manual Manifolds PX-TMD Series
Introduction Powerex manifolds are cleaned, tested and prepared for the indicated gas service and are built in accordance with the Compressed Gas Association guidelines. The manifold consists of a regulator
More informationGeneral page Straight unions page Angle unions page Tee and L-unions page Gauge connection unions page 42
C 2610-00 Table of contents General page 3-13 DILO unions for pressure ranges from 100 320 bar Straight unions page 14-25 Weld-on tube unions page 14-16 Screw-in tube unions page 17-25 with metric / Whitworth-
More informationNAVIGATOR PROP BUILDING INSTRUCTIONS & PHOTOS
NAVIGATOR PROP BUILDING INSTRUCTIONS & PHOTOS Science under the ice Ice sheet At regional competitions the ice is simulated by 8 ft x 4 ft ½-inch foam sheeting (Home Depot part #703990 [in store only],
More informationRIGID RISERS FOR TANKER FPSOs
RIGID RISERS FOR TANKER FPSOs Stephen A. Hatton 2H Offshore Engineering Ltd. SUMMARY Recent development work on the subject of dynamic rigid (steel pipe) risers demonstrates that their scope of application
More information(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)
This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around
More informationptfe and stainless steel hoses
ptfe and stainless steel hoses 3 table of contents Description P.004 Description of FX01 hoses P.004 Description of FX02 hoses P.004 Description of FX03 hoses P.005 Description of FX06 hoses P.005 DESCRIPTION
More informationRadar, Ultrasonic and RF Level Transmitters
Radar, Ultrasonic and RF Level Transmitters Both measures the time it takes the wave to travel between the transmitter and that reflected wave off the surface of the material to reach the transmitter again.
More informationExtension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
More informationDBML-60/80 Squeeze Tool
DBML-60/80 Squeeze Tool OPERATORS MANUAL Description The Mustang Model DBML-60/80 Hydraulic squeeze tool has been manufactured since 1995. A Mustang 3 3/4 bore doubleacting cylinder producing 41,000 lbs
More informationEdit this text for your title
Edit this text for your title MEK 4450 Marine Operations 1-3 Edit this text for your sub-title Presenter name, location, date etc. Kværner ASA / DNV, Fall 2014 Installation of flexibles and cables Typical
More informationA hose layline contains important information for specifying the replacement assembly: manufacturer, hose trade name, working pressure and hose ID.
CONTENTS Introduction Pressure Pressure Drop Temperature Rating Bend Radius Conclusion Additional Information SIDEBAR: Understanding Hydraulic Hose Reinforcement INTRODUCTION Hydraulic hose has a finite
More informationASSE International Product (Seal) Listing Program
ASSE International Product (Seal) Listing Program ASSE 1070-2015 / ASME A112.1070-2015 / CSA B125.70-15 Performance Requirements for Water Temperature Limiting Devices Manufacturer: Contact Person: E-mail:
More informationKAITE HOSE Rev.01. High pressure hygienic hose for the food industry. spray nozzle experts for the processing industry
KAITE HOSE Rev.01 High pressure hygienic hose for the food industry. spray nozzle experts for the processing industry KAITE LTD for the life of your plant 2 KAITE HOSE KAITE HOSE is specifically designed
More informationimportant information
important information Use and installation Installation of metal hose connections is mainly determined by direction of movements, size of movements and frequency of movements. The ways of installation,
More informationTRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS
O-Ring Face Seal Hose TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS O-Ring Face Seal METAL FORMING SOLUTIONS THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS Table of
More informationInstallation, operation & maintenance manual - original version
Installation, operation & maintenance manual - original version AVK gate valves for water and wastewater Series 01, 02, 06, 12, 15, 18, 20, 26, 32, 33, 36, 38, 50, 55 and 636 COPYRIGHT AVK GROUP A/S 2018
More information250 (9.84) 170 (6.69) 225 (8.85) 75 (2.95) 300 (11.81)
Air bellows, single acting Ø... / inch Suitable for applications on rail vehicels Almost frictionless operation No maintenance or lubrication Weather/corrosion resistant metal parts Approvals for fire
More informationSelf-operated Regulators Accessories Differential Pressure and Flow Regulators
Self-operated Regulators Accessories Differential Pressure and Flow Regulators Compression-type fittings Needle valves Compensation chambers Orifice plates Welding neck flanges Control lines Application
More informationStatic dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω).
http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for Anti-Static Environment Anti-Static 650 ESD Static dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω). Classification of conductivity region UE
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationCHAPTER 8: MECHANICAL WAVES TRANSMIT ENERGY IN A VARIETY OF WAYS
CHAPTER 8: MECHANICAL WAVES TRANSMIT ENERGY IN A VARIETY OF WAYS DISCLAIMER FOR MOST QUESTIONS IN THIS CHAPTER Waves are always in motion, as they transmit energy and information from one point to another.
More informationGas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A.
Gas Lines Technical Manual Sumitomo (SHI) Cryogenics of America, Inc. 1833 Vultee Street Allentown, PA 18103-4783 U.S.A. Revision F: April 2008 261320A TABLE OF CONTENTS Page DESCRIPTION...1 SPECIFICATIONS...2
More informationBall valve HKSF-W100. Ball valve HKSF-W100. RMA Kehl GmbH & Co. KG Oststrasse 17 D Kehl / Germany
Ball valve HKSF-W100 RMA Kehl GmbH & Co. KG Oststrasse 17 D-77694 Kehl / Germany info@rma-kehl.de www.rma-armaturen.de 1 Design Features: RMA-ball valves type HKSF-W are fully welded and completely maintenance-free
More informationHigh Pressure Tube Unions
High Pressure Tube Unions DILO. Sustainably tight. Made in Germany I am totally convinced by the high safety level even under extreme pressure. Christian Komm, Siemens AG, Power Generation DILO High pressure
More informationTS1. Ultrasonic Tank Sender. Installation and Operating Instructions. For TS1 Firmware v3.8. Page 1 INST-TS1-V13 18/11/10
TS1 Ultrasonic Tank Sender Installation and Operating Instructions For TS1 Firmware v3.8 Page 1 Table of Contents 1. FEATURES... 3 2. SPECIFICATIONS... 3 3. DIMENSIONS... 4 4. MOUNTING AND INSTALLATION...
More informationOPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference.
English Lubrication Free Air Turbine Handpiece with Water Spray OPERATION MANUAL Please read this Operation Manual carefully before use, and file for future reference. OM-T0286E 001 Thank you for purchasing
More informationHalsey Taylor Owners Manual STOP!
Halsey Taylor Owners Manual 4710 Freeze Resistant Floor Mounted Steel Fountain STOP! PLEASE READ THE FOLLOWING INFORMATION. ITALLATION ITRUCTIO FOR THE 4710FR FTN. WITH 97243C SINGLE VALVE CONTROL ASSEMBLY
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationNorth American Orifice Metering System
Combustion North American Orifice Metering System 8697 and M8697 Metering Orifices accurately measure gas flows to industrial burners. They are compact, inexpensive, and can be installed in individual
More informationNYT CLT- VYH /8 O.D. Copper Tubing 1/8 O.D. Nylon Tubing (Former Part No ) 1/8 O.D. Miniature Vinyl Hose (Former Part No
hose \ `hoz \ n : a flexible tube for conveying gases or fluids tubing \ `t(y)u-bing \ n : a stiff material in the form of a tube used for conveying gases or fluids Do you use a garden tube? The answer
More informationWAVE CYBER HANDLING &
WAVE CYBER PRESSURE VESSEL LIFTING, HANDLING & INSTALLATION INSTRUCTIONS 1 Contents Page Rating, Receiving... 3 Basic Handling Rules... 4 UV Protection... 8 Vacuum Protection Flex Connectors... 9 Flexibility
More informationSolar panel. C ground profile (N-S) Omega ballast plate
Instruction Manual AvaSolar -Roof (patent: 1018790 A3) 1 Parts 8 4 3 1 2 7 9 5 6 1 Mounting brackets AvaSolar -Roof 4 Solar panel 7 L-profile 2 AvaSolar -cover 5 C ground profile (N-S) 8 Clamps 3 AvaSolar
More informationTHE ARENA TABLE OF CONTENTS 6 THE ARENA OVERVIEW Dimensions and Tolerances... 2
Section 6 THE ARENA TABLE OF CONTENTS 6 THE ARENA... 2 6.1 OVERVIEW... 2 6.1.1 Dimensions and Tolerances... 2 6.2 PLAYING FIELD... 4 6.2.1 Boundaries and Markings... 4 6.2.2 The RACK... 5 6.3 GAME PIECES...
More informationGAS SYSTEM HYDRA GS. The gas installation system that sets new standards. Witzenmann GmbH
GAS SYSTEM The gas installation system that sets new standards. Witzenmann GmbH Östliche Karl-Friedrich-Str. 134 75175 Pforzheim, Germany Phone +49 7231 581-0 Fax +49 7231 581-820 wi@witzenmann.com www.witzenmann.com
More information