The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
|
|
|
- Imogene Bishop
- 6 years ago
- Views:
Transcription
1 The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "HYTREL" POLYESTER ELASTOMERS ALL IN SYNONYM LIST HYT007 HYT007 Revised 6-MAR-2000 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification "HYTREL" is a registered trademark of DuPont. Corporate MSDS Number : DU # Tradenames and Synonyms "HYTREL" 3046 NC010, NC010, 3046X1, 3048X1, 3078, "HYTREL" 4056, 4059FG, 4068, 4069, 4069B, 4533, # "HYTREL" 4556, 4556B, 4766X1, 4767, "HYTREL" 5526, 5553FG NC010, 5556, 6356, 6359FG, # "HYTREL" 7246, 7246HV, 8238, "HYTREL" BM4783X-1, "HYTREL" G3548L, G3548W, "HYTREL" G4044, G4074, G , G4078W, G4774, G4778, "HYTREL" G5544, "HYTREL" HTC2300X06, "HYTREL" HTR6108, HTR8171, HTR8171 NC010, HTR8186, HTR8206, "HYTREL" HTR8241, HTR8242, "HYTREL" HTR8382, HTR8347 NC010, HTR8347SPP NC010, "HYTREL" HTR8407 NC010, HTR8408 NC010, HTR8409 NC010, "HYTREL" HTR8543 NC010, HTR8618 NC010 "HYTREL" HTX8347, HTX8382, "HYTREL" HTX8457 NC010, "HYTREL" HTX8531 NC010, HTX8532 NC010, HTX8542 NC010 Company Identification MANUFACTURER/DISTRIBUTOR DuPont Engineering Polymers 1007 Market Street Wilmington,DE PHONE NUMBERS Product Information : 1-(800) Transport Emergency : 1-(800) Medical Emergency : 1-(800) COMPOSITION/INFORMATION ON INGREDIENTS Components Material CAS Number % BUTYLENE/POLY(ALKYLENE ETHER) PHTHALATE >90
2 HYT007 DuPont Page 2 (COMPOSITION/INFORMATION ON INGREDIENTS - Continued) Components (Remarks) Material is not known to contain Toxic Chemicals under Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372. HAZARDS IDENTIFICATION Potential Health Effects ADDITIONAL HEALTH EFFECTS Before using this resin, please read Bulletin H-38066, "Handling and Processing Precautions for HYTREL." Carcinogenicity Information None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, OSHA or ACGIH as a carcinogen. FIRST AID MEASURES First Aid INHALATION No specific intervention is indicated as the compound is not likely to be hazardous by inhalation. Consult a physician if necessary. If exposed to fumes from overheating or combustion, move to fresh air. Consult a physician if symptoms persist. SKIN CONTACT The compound is not likely to be hazardous by skin contact, but cleansing the skin after use is advisable. If molten polymer gets on skin, cool rapidly with cold water. Do not attempt to peel polymer from skin. Obtain medical treatment for thermal burn. EYE CONTACT In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Call a physician. INGESTION No specific intervention is indicated as compound is not likely to be hazardous by ingestion. Consult a physician if necessary.
3 HYT007 DuPont Page 3 FIRE FIGHTING MEASURES Flammable Properties Flash Point : Not Applicable Not a fire or explosion hazard. Combustible. Hazardous gases/vapors produced in fire are carbon monoxide. Extinguishing Media Water, Foam, Dry Chemical, CO2. Fire Fighting Instructions Keep personnel removed and upwind of fire. Wear self-contained breathing apparatus. ACCIDENTAL RELEASE MEASURES Safeguards (Personnel) NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up. Spill Clean Up Sweep up to avoid slipping hazard. HANDLING AND STORAGE Handling (Personnel) See FIRST AID and PERSONAL PROTECTIVE EQUIPMENT SECTIONS. Storage Store in a cool, dry place. Keep containers tightly closed to prevent moisture absorption and contamination. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls VENTILATION When hot processing this material, use local and/or general exhaust ventilation to control the concentration of vapors and fumes below exposure limits.
4 HYT007 DuPont Page 4 (EXPOSURE CONTROLS/PERSONAL PROTECTION - Continued) In cutting or grinding operations with this material, use local exhaust to control the concentration of dust below exposure limits. Personal Protective Equipment EYE/FACE PROTECTION Wear safety glasses. Wear coverall chemical splash goggles and face shield when possibility exists for eye and face contact due to splashing or spraying of molten material. A full face mask respirator provides protection from eye irritation. RESPIRATORS A NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge with a dust/mist filter may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances where air purifying respirators may not provide adequate protection. PROTECTIVE CLOTHING If there is potential contact with hot/molten material, wear heat resistant clothing and footwear. Exposure Guidelines Exposure Limits "HYTREL" POLYESTER ELASTOMERS ALL IN SYNONYM LIST HYT007 PEL (OSHA) : Particulates (Not Otherwise Regulated) 15 mg/m3, 8 Hr. TWA, total dust 5 mg/m3, 8 Hr. TWA, respirable dust PHYSICAL AND CHEMICAL PROPERTIES Physical Data Melting Point : C ( F) Solubility in Water : Insoluble Odor : None Form : Pellets Color : Off-white to light yellow Specific Gravity : >1
5 HYT007 DuPont Page 5 STABILITY AND REACTIVITY Chemical Stability Stable at normal temperatures and storage conditions. Conditions to Avoid Oxidizing (heating in air). Abnormally long processing time or high temperatures can produce irritating and toxic fumes. Incompatibility with Other Materials Incompatible or can react with oxidizing agents. Decomposition Hazardous gases or vapors can be released, including acrolein, tetrahydrofuran, croton aldehyde, acetaldehyde. Polymerization Polymerization will not occur. ECOLOGICAL INFORMATION Ecotoxicological Information AQUATIC TOXICITY: No information is available. Toxicity is expected to be low based on insolubility in water. DISPOSAL CONSIDERATIONS Waste Disposal Preferred options for disposal are (1) recycling, (2) incineration with energy recovery, and (3) landfill. The high fuel value of this product makes option 2 very desirable for material that cannot be recycled, but incinerator must be capable of scrubbing out acidic combustion products. Treatment, storage, transportation, and disposal must be in accordance with applicable federal, state/provincial, and local regulations.
6 HYT007 DuPont Page 6 TRANSPORTATION INFORMATION Shipping Information Not regulated in transportation by DOT/IMO/IATA. REGULATORY INFORMATION U.S. Federal Regulations TSCA Inventory Status : In compliance with TSCA Inventory requirements for commercial purposes. State Regulations (U.S.) STATE RIGHT-TO-KNOW LAWS No substances on the state hazardous substances list, for the states indicated below, are used in the manufacture of products on this. SUBSTANCES ON THE PENNSYLVANIA HAZARDOUS SUBSTANCES LIST PRESENT AT A CONCENTRATION OF 1% OR MORE (0.01% FOR SPECIAL HAZARDOUS SUBSTANCES): None known. WARNING: SUBSTANCES KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM: None known. SUBSTANCES ON THE NEW JERSEY WORKPLACE HAZARDOUS SUBSTANCE LIST PRESENT AT A CONCENTRATION OF 1 % OR MORE (0.1% FOR SUBSTANCES IDENTIFIED AS CARCINOGENS, MUTAGENS OR TERATOGENS): None known. OTHER INFORMATION Additional Information MEDICAL USE: CAUTION: Do not use in medical applications involving permanent implantation in the human body. For other medical applications see DuPont CAUTION Bulletin No. H The data in this relates only to the specific material designated herein and does not relate to use in combination with any other material or in any process. Responsibility for MSDS : I. V. BEBENSEE DUPONT ENGINEERING POLYMERS Address : CHESTNUT RUN PLAZA 713 WILMINGTON, DE Telephone : # Indicates updated section.
7 HYT007 DuPont Page 7 (Continued) This information is based upon technical information believed to be reliable. It is subject to revision as additional knowledge and experience is gained. End of MSDS
1-Octene, polymer with ethene (cas ) MSDS
Click http://www.guidechem.com/cas-262/26221-73-8.html for suppliers of this product 1-Octene, polymer with ethene (cas 26221-73-8) MSDS The MSDS format adheres to the standards and regulatory requirements
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZYTEL" POLYAMIDE RESINS ON SYNONYM
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZODIAQ" QUARTZ SURFACES COR009 Revised
DuPont Page 1 Material Safety Data Sheet
DuPont Page 1 "CORIAN" PRODUCTS, SILICONE SEALANT ALL COLORS COR005 Revised April 7, 2011 Printed 7-APR-2011 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification Corian is a registered trademark
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZYTEL" NYLON RESINS ALL IN SYNONYM
ELVAMIDE 8061 nylon multipolymer resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
AF Amorphous Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "DELRIN" ACETAL RESIN/PTFE BLENDS ALL
Tefzel ETFE Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Conductive Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE fluoroplastics
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PTFE Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
: Ceramic Aluminum Oxide Nylox Brush
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Ceramic Aluminum Oxide Nylox Brush 1.2. Relevant identified uses of the substance
SAFETY DATA SHEET. for Mission Rubber Neoprene Gaskets
SAFETY DATA SHEET for Mission Rubber Neoprene Gaskets SECTION TOPIC PG 1 Identification 1 2 Hazard Identification 1-2 3 Composition/Information On Ingredients 2 4 First Aid Measures 2 5 Firefighting Measures
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "StoneTech" Professional "KlenzAll"
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "StoneTech" Professional BulletProof(TM)
"BOLPHANE" SHRINK FILMS SAFETY DATA SHEET
Information in this format is provided as a service to our customers and is intended only for their use. Others may use it at their own discretion and risk. "BOLPHANE" SHRINK FILMS SAFETY DATA SHEET I.
Tefzel ETFE FLUOROPOLYMERS
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
KEVLAR brand engineered elastomer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material Safety Data Sheet
VM-651 VM651 Revised 3-FEB-2006 Printed 12-APR-2006 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Tradenames and Synonyms Semiconductor Material Company Identification MANUFACTURER/DISTRIBUTOR HD MicroSystems(TM)
Tynex A abrasive filaments
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PRODUCT DESCRIPTION: R60G33 HSL BLACK PRODUCT CODE:
DATE: 9/26/13 M A T E R I A L S A F E T Y D A T A S H E E T PAGE: 1 MATERIAL SAFETY DATA SHEET THE ATTACHED MATERIAL SAFETY DATA SHEET (MSDS) IS AN IMPORTANT DOCUMENT. THE OSHA HAZARDOUS COMMUNICATION
Material Safety Data Sheet Product Name: Product Code:
Version Date: /0/999 Section. Chemical, Product and Company Identification Page of 5 Print Date 6/2/00 4:48:42 PM Synonyms: Responsible Party: Product Use: POLYETHYLENE ETHENE HOMOPOLYMER (formerly Hoechst
PRODUCT DESCRIPTION: 66G13-L NATURAL PRODUCT CODE:
DATE: 10/03/13 M A T E R I A L S A F E T Y D A T A S H E E T PAGE: 1 MATERIAL SAFETY DATA SHEET THE ATTACHED MATERIAL SAFETY DATA SHEET (MSDS) IS AN IMPORTANT DOCUMENT. THE OSHA HAZARDOUS COMMUNICATION
Neoprene polychloroprene
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material Safety Data Sheet
Material Safety Data Sheet Revision Number: 002.1 Issue date: 03/07/2010 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: Company address: Henkel Corporation One Henkel Way Rocky Hill,
: Nylon Nylox Brushes
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Nylon Nylox Brushes 1.2. Relevant identified uses of the substance or mixture and
Material Safety Data Sheet
Material Safety Data Sheet Revision Number: 003.0 Issue date: 03/30/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: Company address: Henkel Corporation 10 Finderne Avenue, Suite
Material Safety Data Sheet
365 Meadowlands Blvd. 1 Main Street Washington, PA 15301 Grenloch, NJ 08032 Ph: 724 746 6050 Ph: 856 227 0500 Fx: 724 746 9209 Fx: 856 232 1754 Material Safety Data Sheet DELRIN 150, 550/511P Natural &
Safety Data Sheet. Hydex 4101 UD Blue ISSUE DATE: 08/31/ PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION PRODUCT COLORS:
1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: SYNONYMS: PRODUCT COLORS: Hydex 4101 UD Blue Not Applicable Blue MANUFACTURER: Ensinger Inc. DIVISION: Stock Shapes ADDRESS: 365 Meadowlands Blvd., Washington,
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material Safety Data Sheet
Material Safety Data Sheet Revision Number: 001.1 Issue date: 07/27/2012 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: Company address: Henkel Corporation One Henkel Way Rocky Hill,
PFA Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
M A T E R I A L S A F E T Y D A T A S H E E T PAGE: 1 MATERIAL SAFETY DATA SHEETS THE ATTACHED MATERIAL SAFETY DATA SHEET (MSDS) IS AN IMPORTANT DOCUMENT. THE OSHA HAZARDOUS COMMUNICATION STANDARD REQUIRES
Material Safety Data Sheet
365 Meadowlands Blvd. 1 Main Street Washington, PA 15301 Grenloch, NJ 08032 Ph: 724 746 6050 Ph: 856 227 0500 Fx: 724 746 9209 Fx: 856 232 1754 Material Safety Data Sheet DELRIN G20 Natural and Colors
Material Safety Data Sheet
Material Safety Data Sheet Revision Number: 001.2 Issue date: 12/30/2010 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: Company address: Henkel Corporation 10 Finderne Avenue Bridgewater,
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Manufacturer Name: Federal-Mogul Corporation 26555 Northwestern Highway Southfield, Michigan 48034 U.S.A. Intended Use: Industrial
MATERIAL SAFETY DATA SHEET. COPPER CARE PRODUCT NAME: Aqua-Nap-5. ATTENTION: SAFETY MANAGER MSDS Number: Date of Last Revision: 04/10/2006
ATTENTION: SAFETY MANAGER MSDS Number: Date of Last Revision: 04/10/2006 A. PRODUCT INFORMATION Product Code: Waterborne Copper Naphthenate / Common Name/Synonyms: Naphthenic Acid, Copper Salt Chemical
Allyson M. Huhn, Regulatory & Compliance Manager
1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: SYNONYMS: PRODUCT CODES: Tecafine LDPE Polyethylene homopolymer Not Applicable MANUFACTURER: Ensinger Inc. DIVISION: Stock Shapes ADDRESS: 365 Meadowlands
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET PRODUCT: Paste REVISION DATE: 03/09/2009 REVISION NUMBER: 2 Date Printed: 03/09/2009 1. PRODUCT AND COMPANY IDENTIFICATION MANUFACTURED BY: Ferro Corporation 251 West Wylie Avenue
Material Safety Data Sheet
Material Safety Data Sheet Revision Number: 001.1 Issue date: 04/11/2013 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: TECHNOMELT DORUS KS 217 known as Dorus KS 217 natur Hotmelt adhesive
: Tefzel ETFE fluoropolymers
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
PRODUCT NAME : PLASTER OF PARIS UPC NUMBER : , , , PRODUCT USE/CLASS : Plaster of Paris
------------------------------------------------------- M A T E R I A L S A F E T Y D A T A S H E E T ------------------------------------------------------- SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Material Safety Data Sheet
Material Safety Data Sheet Revision Date: 03/15/2005 Issue date: 03/15/2005 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product type: Epoxy Resin Company address: Henkel Corporation 1001 Trout Brook
=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION
5484 S 07 00 MATERIAL SAFETY DATA SHEET Section 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER HMIS CODES Health 1 5484 S Flammability 0 Reactivity 0 PRODUCT NAME Athletic Field Marking Paint, PMS
Material Safety Data Sheet
1 Section 1 1145 Sutton Street Howell, MI 48843 Telephone Numbers: (517) 295-4196 Product Information () Transportation Emergency Chemtrec: (800) 424-9300 MATERIAL IDENTIFICATION PRODUCT NAME: LCA PEI
MANUFACTURER: RTP COMPANY Information Phone: EAST FRONT STREET Emergency Phone: WINONA MN 55987
Page: 1 RTP MATERIAL SAFETY DATA SHEET Printed: 03/01/06 Revised: 06/27/05 SECTION I - PRODUCT AND COMPANY IDENTIFICATION TRADE NAME: RTP PP 10 GF BLK CAS NUMBER: MIXTURE EC NUMBER: MIXTURE MANUFACTURER:
MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Date Revised: 7/18/2013 Page: 1 SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Material Identity Product Name: Mold Release Product Numbers: 105685 Product Use: Water-Based Release Agent Company
MATERIAL SAFETY DATA SHEET Date Issued : 04/08/2004 MSDS No : XP692 (Sn63/Pb37) Date Revised : 02/25/2013 Revision No : 4
Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: PRODUCT DESCRIPTION: No Clean Solder Paste MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Qualitek International, Inc. 1-800-535-5053 Infotrac
: UNIVERSAL COLOR PACK SHADOW GRAY-cs
SECTION 1 - PRODUCT IDENTIFICATION Trade name Product code : : 1558594Q529 COMPANY : Euclid Chemical Company 19218 Redwood Road Cleveland, OH 44110 Telephone : 1-800-321-7628 Emergency Phone: : U.S. only:
Materials Safety Data Sheet
The MSDS format adheres to the standards and regulatory regulatory requirements of Chian and may not meet regulatory requirements in other countries. Polyphenylsulfone PPSU Materials Safety Data Sheet
SAFETY DATA SHEET. Version 1 Revision Date 1/4/2018 Print Date 1/7/2016. Mold Platen Insulation
Version 1 Revision Date 1/4/2018 Print Date 1/7/2016 SECTION 1: IDENTIFICATION Product Name: Other/ Generic Names: MPI Mold Platen Insulation Manufacturer or supplier s details Company The Gund Company,
DuPont Krytox 143 Series Oils
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
Revision date: 01/11/2015 SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance Formula : CaCO 3 Molecular weight : : 100.09 g/mol CAS No. :
DuPont Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material Safety Data Sheet
1 Section 1 1145 Sutton Street Howell, MI 48843 Telephone Numbers: (517) 295-4196 Product Information () Transportation Emergency Chemtrec: (800) 424-9300 MATERIAL IDENTIFICATION LCA 100P Type PRODUCT
"KRYTOX" LVP Fluorinated Grease 5806PP Revised 5-NOV-1993 Printed 19-NOV-2002
"KRYTOX" LVP Fluorinated Grease 5806PP Revised 5-NOV-1993 Printed 19-NOV-2002 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification "KRYTOX" is a registered trademark of DuPont. Corporate MSDS
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "TEFLON" AF SOLUTIONS ALL IN SYNONYM
MSDS: Polypropylene Copolymer Talc Filled
Section 1 MSDS: Polypropylene Copolymer Talc Filled Dynamic Polymer Solutions Telephone Numbers: (810) 324-1451 Chemtrec - Transportation Emergency: (800) 424-9300 MATERIAL IDENTIFICATION PRODUCT NAME:
MATERIAL SAFETY DATA SHEET Finished Product
MATERIAL SAFETY DATA SHEET Finished Product Fellowes Surface Cleaning Wipes Date-Issued: 01/17/2003 MSDS Ref. No: 98997 Date-Revised: 01/17/2003 Revision No: New MSDS 1. PRODUCT AND COMPANY IDENTIFICATION
Carolina Narrow Fabric Company
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Polyester fabric SYNONYMS: PRODUCT CODES: MANUFACTURER: Carolina Narrow Fabric Company DIVISION: ADDRESS: 1100 Patterson Ave, Winston Salem,
Material Safety Data Sheet Magnesium stearate
Material Safety Data Sheet Magnesium stearate Section 1 - Chemical Product and Company Identification MSDS Name: Magnesium stearate Synonyms: Octadecanoic acid, magnesium salt. Section 2 - Composition,
Manufacturer : DuPont Performance Elastomers L.L.C Bellevue Park Corporate Center, 300 Bellevue Parkway Wilmington, Delaware 19809
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Dear LEWISBins+ Customer;
1055 Corporate Center Drive Oconomowoc, WI 53066 USA Phone: 262.560.5700 Fax: 877-985-3947 www.lewisbins.com Dear LEWISBins+ Customer; Thank you for your interest in our products. You recently requested
Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.
Safety Data Sheet Issue Date: 16-Feb-2012 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # United 894 ZYME-OUT UNITED-894 Recommended use of the chemical
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "KRYTOX" GPL-21X Series Fluorinated
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 05/10/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Poly(vinyl buytral) Molecular Formula:
Material Safety Data Sheet
Material Safety Data Sheet Section 1 General Information Manufacturer: Zinsser Company, Inc. 173 Belmont Drive Somerset, NJ 08875 (732) 469-8100 Emergency Telephone: Chemtrec (800) 424-9300 Date: December
Safety Data Sheet. allergylabs.com. 1. Product & Company Identification. 2. Hazards Identification
L Safety Data Sheet allergylabs.com Version 1.0 Revision Date: 09/15/2014 1. Product & Company Identification 1.1 Product identifiers Product Name : Sterile Diluent - 10% Glycero-Saline Product Code(s)
SAFETY DATA SHEET according to Regulation (EC) No. 453/2010
Page 1 of 5 SECTION 1 : Identification of the substance/preparation and of the company/undertaking 1.1. Product identifier Product code : 7500-100, 7500-105, 7500-110, 7500-035, 7500-040 Product name Product
: KUREZ W VOX - 55 GAL DRUM
SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : 157W 55 COMPANY : Euclid Chemical Company 19218 Redwood Road Cleveland, OH 44110 Telephone : 1-800-321-7628 Emergency Phone: : U.S. only:
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Date-Issued: 12/20/2002 MSDS Ref. No: 2300 Date-Revised: 12/20/2002 Revision No: 1 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT DESCRIPTION: Cleaning swabs of cotton, chamois,
CAS-No. EC-No. Index-No. Concentration Cellulose May be harmful if inhaled. May cause respiratory tract irritation.
SIGMA-ALDRICH Material Safety Data Sheet Version 3.0 Revision Date 01/03/2009 Print Date 03/23/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : -Cellulose Product Number : C8002 Brand : Sigma
Material Safety Data Sheet
Material Safety Data Sheet Revision Number: 002.0 Issue date: 11/19/2010 1. PRODUCT AND COMPANY IDENTIFICATION Product name: Product type: Company address: Henkel Corporation 10 Finderne Avenue Bridgewater,
DOW CORNING CORPORATION Material Safety Data Sheet MOLYKOTE(R) Z POWDER
Page: 1 of 7 1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY Dow Corning Corporation South Saginaw Road Midland, Michigan 48686 24 Hour Emergency Telephone: Customer Service: Product Disposal Information:
JeTT Research & JeTT SeTT
Gesswein SDS# JR1000a SECTION 1. IDENTIFICATION Jett Basic TM Recommended use of the chemical and restrictions on use Intended Use: Various applications, can contact skin Uses advised against: Do not ingest
SAFETY DATA SHEET. Trade name: Master Fiber Seal Revised: 5/29/2015. SECTION 1: Identification of the substance/mixture and of the company/undertaking
MMG Mud Masters Group a division of Horizon Mud Company SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking Trade name: Master Fiber Seal Supplied by: Mud
Material Safety Data Sheet
HD-3007 HD3007 Revised 27-MAY-2008 Printed 27-MAY-2008 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Company Identification MANUFACTURER/DISTRIBUTOR HD MicroSystems(TM) Cheesequake Road Parlin New Jersey USA
1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2 COMPOSITION / INFORMATION ON INGREDIENTS
1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Trash Bags Product Type Stock Formula Manufactured by: Bolsas y Polietilenos de la Frontera, SA de CV Calle Casiopea #29 Colonia Empleado Postal, Tijuana,
240 COLOR PAK - ALUMINUM STONE 6 POUCHES Version 2.0 Print Date 10/24/2012 REVISION DATE: 07/08/2012
SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : 15151 529 COMPANY : Tremco Incorporated 3735 Green Road Cleveland, OH 44122 Telephone : (216) 292-5000 8:30-5:00 EST Emergency Phone: : (216)
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET PRODUCT: Powder REVISION DATE: 01/09/2008 REVISION NUMBER: 2 Date Printed: 01/09/2008 1. PRODUCT AND COMPANY IDENTIFICATION MANUFACTURED BY: Ferro Corporation 251 West Wylie
DuPont Krytox GPL 21(X) Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material Safety Data Sheet
Material Safety Data Sheet Version 3.0 Revision Date 12/29/2008 Print Date 03/10/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product Number : 53680 Brand : Aldrich Company : Sigma-Aldrich
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).
1. PRODUCT AND COMPANY IDENTIFICATION Product name : IRDye 700 Phosphoramidite Part Number(s) : 830-05368, 4200-33, 4200-34 Brand : LI-COR Identified uses : Laboratory chemicals, Manufacture of substances
THIS MSDS IS OFFERED IN CANADIAN-FRENCH UPON REQUEST. ON PEUT DEMANDER CETTE MSDS A LA LANGUE FRANCAISE-CANADIENNE.
------------------------------------------------------- M A T E R I A L S A F E T Y D A T A S H E E T ------------------------------------------------------- SECTION 1 - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Material Safety Data Sheet (alpha-ketoglutaric Acid)
415 Huguenot Street New Rochelle, NY 10801 Phone:(914) 654-6800 Fax: (914) 654-6899 DATE PREPARED: 6/19/2009 REVISION NUMBER: 6/19/2009 EMERGENCY NUMBER: CHEMTREC: 1-800-424-9300 SECTION 1 PRODUCT AND
GHS SAFETY DATA SHEET (SDS)
GHS SAFETY DATA SHEET (SDS) SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION PRODUCT: Part #1562 Nomex Honeycomb, 1.8 lb. FIBRE GLAST DEVELOPMENTS CORP. 385 CARR DRIVE BROOKVILLE, OH 45309 TELEPHONE: (937)
=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION
KDQ5221 06 00 MATERIAL SAFETY DATA SHEET Section 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER HMIS CODES Health 2 KDQ5221 Flammability 0 Reactivity 0 PRODUCT NAME KRYLON* GLOWZ Indoor/Outdoor Glow
Plexiglas (R) SG PLUS Impact Acrylic Sheet Material Safety Data Sheet
1 PRODUCT AND COMPANY IDENTIFICATION Altuglas International 2000 Market Street Philadelphia, PA 19103 Information Telephone Numbers Altuglas International Customer Service EMERGENCY PHONE NUMBERS: Chemtrec:
=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION
5460 S 03 00 MATERIAL SAFETY DATA SHEET Section 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NUMBER HMIS CODES Health 2 5460 S Flammability 0 Reactivity 0 PRODUCT NAME Athletic Field Marking Paint, HI
SECTION 1 PRODUCT IDENTIFICATION AND COMPANY IDENTIFICATION MSIT Speci Purge SP1000 & SP2000
MATERIAL SAFETY DATA SHEET Page 1 of 6 Product Name: Chemical Name: Chemical Family: Product Appearance: Company Identification: SECTION 1 PRODUCT IDENTIFICATION AND COMPANY IDENTIFICATION MSIT Speci Purge
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET Premium AW Hydraulic Oil 68 Date Prepared: 07/01/2006 Page 1 of 6 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name Premium AW Hydraulic Oil 68 Chemical Name Mixture
SAFETY DATA SHEET Kemresin. Section 1 - Product and Company Identification. Section 2 - Hazards Identification
SAFETY DATA SHEET Kemresin Section 1 - Product and Company Identification Manufactured by: Kewaunee Scientific Corporation PO Box 1842 Statesville, NC 28687-1842 2700 West Front Street Statesville, NC
MATERIAL SAFETY DATA SHEET
Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: PRODUCT DESCRIPTION: (Sn60/Pb40, Sn63/Pb37, Sn62/Pb36/Ag2) MANUFACTURER Qualitek International, Inc. 315 Fairbank St. Addison, IL 60101 Emergency
Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: 2017 Product Name: Slip Stop Other Means of Identification SDS #: F6523 1. PRODUCT AND COMPANY IDENTIFICATION Recommended
Tefzel ETFE Conductive Fluoropolymer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Material Safety Data Sheet
Material Safety Data Sheet Revision Number: 001.0 Issue date: 12/21/2009 1. PRODUCT AND COMPANY IDENTIFICATION Product type: Hotmelt adhesive Region: United States Company address: Henkel Corporation One