Digital Mini Compressor 12V

Transcription

1 Digital Mini Compressor 12V Instruction Manual 3 Year Replacement Warranty DMC-012! WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and /or serious injury. Save all warnings and instructions for future reference. To view the full range visit:

2 TABLE OF CONTENTS SPECIFICATIONS Page 2 KNOW YOUR PRODUCT.. Page 2 INTRODUCTION Page 3 ELECTRICAL SAFETY. Page 3 GENERAL SAFETY INSTRUCTIONS. Page 4 ADDITIONAL SAFETY INSTRUCTIONS FOR AIR COMPRESSORS. Page 6 OPERATION. Page 7 MAINTENANCE. Page 9 SPARE PARTS.. Page 9 DESCRIPTION OF SYMBOLS Page 10 PACK CONTENTS.. Page 10 WARRANTY.. Page 11 1

3 SPECIFICATIONS MODEL NO. DMC-012 Motor: 12VDC Max. Pressure: 100PSI Max. Current: 10A Unload Current: 5±1A Inflate Speed: <5.5mins to inflate a 195/65R15 tyre from 0-35PSI Measurement Range: PSI Control Accuracy: +/- 1.5PSI, 25 C Power Cable Length: 3m Working Temperature: -10 C-60 C Dimensions: 185 x 176 x 77mm Tool Weight: 0.95kg KNOW YOUR PRODUCT V Adaptor 2. Valve connector 3. On/off switch 4. Digital pressure gauge 5. Air hose 6. Ball adaptor 7. General inflating adaptor 2

4 INTRODUCTION Congratulations on purchasing an Ozito Digital Mini Compressor. We aim to provide quality tools at an affordable price. We hope you will enjoy using this tool for many years. Your Digital Mini Compressor DMC-012 has been designed for automobiles, motorcycles, bicycles, rafts, air mattresses and sports balls and is intended for DIY use only. The Digital Mini Compressor is a multifunctional compressor, with a digital pressure gauge, the target pressure can be preset and will automatically turn off when the desired pressure is reached.! ELECTRICAL SAFETY! WARNING! When using mains-powered equipment, basic safety precautions, including the following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage. Read and understand the manual prior to operating this tool. Save these instructions and other documents supplied with this tool for future reference. The electric motor has been designed for 12V only. Always check that the power supply corresponds to the voltage on the rating plate. 3

5 ! GENERAL SAFETY INSTRUCTIONS! WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SAVE THESE INSTRUCTIONS 1) Work area a) Keep work area clean and well lit. Cluttered and dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock. b) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. c) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. d) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection used for appropriate conditions will reduce the risk of personal injuries. c) Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents. d) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. e) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can get caught in moving parts. 4

6 ! GENERAL SAFETY INSTRUCTIONS 4) Power tool use and care a) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. b) Disconnect the plug from the power supply and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventative safety measures reduce the risk of starting the power tool accidentally. c) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. d) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. e) Use the power tool, accessories and tool bits etc. in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5) Service a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. b) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. 5

7 ADDITIONAL SAFETY INSTRUCTIONS FOR COMPRESSORS This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. When using the compressor, ensure you are parked in a safe, well lit location, off the road and with the hand brake engaged. Ensure your personal safety is not at risk and never use the Digital Mini Compressor while the car is in motion. Do not place the hose end against any part of your body when turned on, as this may infuse air into your blood stream putting your health at serious risk. Do not make any alterations to this Compressor. Only use the adaptors supplied with this product. Use this product only in accordance with operation instructions included in this manual. If the vehicle fuse if blown, only replace with identical rated fuse. Inspect each part before use. Do not use if bent, broken, melted, burnt or if the unit appears to be damaged. Check the tyre pressure before inflating. Never exceed the suggested pressure of the item being inflated. If suggested pressure is exceeded, the item being inflated may burst. Do not bend or pinch the air hose while the Compressor is in use. It is not suggested that the Compressor work continuously for more than 10 minutes. If 10 minutes of use has been reached, turn it off and let it cool for 8 minutes before using again. If the Compressor is making abnormal sounds or its temperature if quite high, turn off the power straight away and let it cool for at least 10 minutes before trying again. Improper use may result in damage of the Compressor. Do not leave unattended and operating. Keep out of reach of children. Put the Compressor in a dry place if it is not in use for an extended period of time. Keep the Compressor away from flammable liquid or gas. Do not allow the Compressor to become wet. Never put the connector and adaptors into your mouth, ear or eye. They are not toys. 6

8 OPERATION Inflating Vehicle Tyres (Automobiles, Motorcycles, Bikes) 1. Plug the 12V adaptor (1) into the 12VDC utility socket in your vehicle (Fig. 1). NOTE: Do not turn the Compressor on at this stage. Turn the Compressor on after the desired pressure has been preset. Fig Unscrew the plastic cap on the tyre air valve. Attach the air hose (5) to the tyre valve stem by twisting the valve connector (2) clockwise. Make sure the valve connector (2) is firmly attached to tyre air valve (Fig. 2). Fig The current pressure rating of the item you are inflating will now appear on the digital pressure gauge (4). 4. Set the target pressure value by using the (M) button to select from either PSI, Bar or KPA. 5. Hold down the + or button to select the desired pressure rating. When the screen flashes, use the +/- button to select the desired pressure. Leave the selected pressure for 5 seconds. This will then be saved as the preset pressure and be stored into memory. NOTE: Once the pressure setting is saved into memory, it does not need to be reset for consecutive applications, to restart inflating of an additional tyre, press the (M) button and the compressor will start to work automatically. 6. Press the on/off switch (3) to the on position ( I ) (Fig. 3), the Compressor will start to work automatically. Fig The Compressor will stop inflating automatically once the preset pressure value has been reached. 8. Press the on/off switch (3) to the off position ("O"), the Compressor will be turned off. 9. Remove and store the air hose (5) in the provided storage compartment at the back of the Compressor. 7

9 OPERATION (cont.) Inflating Air Mattresses, Sports Balls and Rafts 1. Select the appropriate adaptor depending on your application. The ball adaptor (6) can be used for inflating sports balls and the general inflator adaptor (7) can be used for air mattresses and rafts etc. 2. Insert your required adaptor into the valve connector (2) and secure by turning the valve connector (2) clockwise. Fig Insert the connected adaptor into the inflatable item, then follow steps 3-8 from Inflating vehicle tyres section. 4. Check for the correct firmness and adjust as needed, only inflate to the manufacturer s specifications of the product that you are inflating. 5. Remove the selected adaptor from the valve connector when you are finished and store in the provided storage compartment in the rear of the Compressor. Typical Inflating Pressures Bike Tyres Football Basketball Volleyball PSI 13 PSI 9 PSI 5 PSI NOTE: Please refer to manufacturer s specifications in the car manual for inflation guides. Be careful not to over inflate. 8

10 MAINTENANCE Caution: Always ensure the Compressor is switched off and the plug is removed before performing any adjustments or maintenance procedures. Keep the ventilation vents of the Compressor clean at all times, if possible, prevent foreign matter from entering the vents. After each use, blow air through the Compressor housing to ensure it is free from all dust particles which may build up. Build up of dust particles may cause the Compressor to overheat and fail. If the enclosure of the Compressor requires cleaning do not use solvents but a moist soft cloth only. Never let any liquid get inside the Compressor; never immerse any part of the Compressor into a liquid. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the Compressor by an unauthorised person or by mishandling of the Compressor. SPARE PARTS Limited spare parts are available subject to availability. Please contact your local Bunnings Special Orders Desk to order the required spare parts. Most common spare parts listed below Spare Part Part No. Switch button and decorated ring On/off switch SPDMC012-03A SPDMC

11 DESCRIPTION OF SYMBOLS V Volts W Watts dc Direct current ma Milliamperes Warning Read instruction manual Electrical Emissions Conformity (EMC) Indoor use only CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice. Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice. PACK CONTENTS 1 x Digital Mini Compressor 1 x Ball adaptor 1 x General inflating adaptor 1 x Instruction manual OZITO INDUSTRIES PTY LTD AUSTRALIA (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: Facsimile: Website: enquiries@ozito.com.au 10

12 WARRANTY YOUR WARRANTY FORM SHOULD BE RETAINED BY YOU AT ALL TIMES. IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE: `Australia New Zealand TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE WARRANTY POLICY OR PROCEDURE. The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law. Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above. 3 YEAR REPLACEMENT WARRANTY Your product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Warranty excludes consumable parts, for example: ball adaptor, general inflating adaptor. WARNING The following actions will result in the warranty being void. Professional, Industrial or high frequency use. If the tool has been operated on a supply voltage other than that specified on the tool. If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations. Failure to perform maintenance as set out within the instruction manual. If the tool is disassembled or tampered with in any way. OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175 OW5