Clean One-touch Fittings

Size: px
Start display at page:

Download "Clean One-touch Fittings"

Transcription

1 Clean One-touch Fittins Series K/K/KG K KK D S T Series K Series K Series KG Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

2 One-touch fittins and for blowin systems and drive air One-touch fittins (for blowin) Series K Collet olypropylene Seal ED (Fluorine coatin) Special confiuration for reliable sealin and low resistance when insertin tube. Body olypropylene O-rin ED (Fluorine coatin) Drive bushin Stainless steel 30 otation of the body allows for easy installation Stud olypropylene Completely oil free (ubber parts are fluorine-coated.) iquid-contact areas are non-metallic arts cleanin, assembly and double packain in a clean room Can be used for vacuum ( 0ka) Guide Stainless steel 30 Series K elease button iht force for removal olypropylene eleases the chuck collet when is removed. lso prevents the chuck from bitin excessively into the. Chuck Stainless steel 30 The chuck provides a secure bite, while holdin force is increased by the collet. Stopper (dust check) Bumper Stainless steel 30 ED olds the cushion and secures the seal. (Fluorine coatin) Suppresses slidin of the seal to prevent eneration of particulates. Clean blowin system Clean room Clean fittin K Clean T/TS Super mist separator -E Odor removal filter -F Clean reulator S 2 port air operated valve Clean as filter SF Clean blow ir micro meter V S SFB Cleanin liquid pressure feed SFC N2 blow N2 as 2 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

3 clean room systems ow particulate eneration Clean performance Stainless steel 30 -K2 esin parts are.. (olypropylene) K esin: etal: Brass (elecroless nickel plated) esin: BT, O etal: Brass (elecroless nickel plated) One-touch fittins (for drive system air pipin) Series K/KG Brass (electroless nickel plated) elease button olypropylene K: iht ray KG: iht blue -KG KG esin: BT, O etal: Stainless steel 303 esin: etal: Stainless steel 30 Environmental resistance Series K K esin: etal: Stainless steel 30 Completely oil free/iquid-contact parts resin (ubber parts are fluorine-coated.) Series KG Excellent K KK D S T Body olypropylene Stud K: Brass (electroless nickel plated) KG: Stainless steel 30 Drive air pipin system Clean room ale connector Clean fittin Body K: Brass (electroless nickel plated) KG: Stainless steel 30 K/KG elief port pipin Solenoid valve exhaust pipin eulator breather pipin Drain pipin Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

4 Clean One-touch Fittins For Blowin Series K os Tubin F, olyolefin Tubin material Soft polyolefin, olyurethane Tubin O.D. ø, ø, ø, ø, ø FE, nylon and soft nylon, and not compatible with the clean series can also be used. owever, the deree of clean performance will be reduced. Note 2) Due to the softness of polyurethane, it may fold when bein inserted. old the end of the and insert it all the way in. Specifications Series K is a line of special One-touch fittins for use in clean room blowin and washin lines. lease consult with SC reardin other types of applications. Seal material: The durability of ED with respect to mineral oils is inferior, which makes it unsuitable for pipin in eneral pneumatic equipment. articulate eneration rade Grade 1 Fluid ir/nitroen as/water (pure water) Note 2) aximum operatin pressure (20 C) 1 a Note 3) Operatin vacuum pressure 0 ka { Torr} roof pressure (20 C) 3 a mbient and fluid temperature 20 C to 0 C Threads JIS B0203 (Taper for pipin) efer to particulate eneration rade classifications. Note 2) The sure pressure must be under the maximum operatin pressure. Note 3) The maximum operatin pressure is the value at 20 C. efer to the operatin pressure curve for other temperatures. Note ) Do not use the fittins with a leak tester or for vacuum retention because they are not uaranteed for zero leakae. ade to Order (efer to pae 21 for details.) articulate Generation Grade Classifications elation between Operatin Temperature and aximum Operatin ressure verae particle concentration articles/ft Grade Grade 3 Grade 2 Grade aximum operatin pressure a article diameter µm or less Operatin temperature C Note) efer to Features 2 in CT. E02-, SC neumatic Clean Series for details. 20 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

5 Clean One-touch Fittins Series K ow to Order Clean One-touch fittins (for blowin) T Y U Construction K 0 01 K 0 odel ale connector, Straiht union Union elbow, ale elbow ale branch tee, Union tee ale run tee ale branch, Union "Y" lu-in reducer O.D. 0 ø 0 ø 0 ø ø ø ade to Order X3 With pipe tape ort size/ O.D. Thread connection Tubin (rod) connection / 1/ 3/ Same dia. ø ø ø ø ø Different dia. (plu-in reducer) lu fittin size ø ø ø ø ø Clean One-touch fittins K KK D S T Component arts No Description Body Stud Chuck Guide elease button Collet Stopper Seal Bumper O-rin Drive bushin aterial Stainless steel 30 Stainless steel 30 (color: liht reen) Stainless steel 30 ED (Fluorine-coated) ED (Fluorine-coated) ED (Fluorine-coated) Stainless steel 30 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

6 Series K Dimensions ale Connector: K ale Elbow: K O.D. ale Branch Tee: KT ale un Tee: KY ale Branch "Y": KU 1/ 1/ 1/ 1/ 1/ 1/ 1/ 3/ 3/ O.D. 1/ 1/ 1/ 1/ 1/ 1/ 1/ 3/ 3/ O.D. odel K K K K K K K K K K odel T TS T TS ass 3 13 ass K K K K K K K K K K eference dimension for after installation 1 indicates the maximum diameter. 1/ 1/ 1/ 1/ 1/ 1/ 1/ 3/ 3/ O.D. O.D. odel eference dimension for after installation 1 2 T TS.1.1 ass KT KT KT KT KT KT KT KT KT KT eference dimension for after installation 1 indicates the maximum diameter. 1/ 1/ 1/ 1/ 1/ 1/ 1/ 3/ 3/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 3/ 3/ odel KY0-01 KY0-02 KY0-01 KY0-02 KY0-01 KY0-02 KY-02 KY-03 KY-03 KY T TS.. 21 ass eference dimension for after installation 1 indicates the maximum diameter ass odel T TS KU KU KU KU KU KU KU KU KU KU eference dimension for after installation indicates the maximum diameter x x x Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

7 Clean One-touch Fittins Series K Dimensions Straiht Union: K Elbow: K Union Tee: KT Union "Y": KU lu-in educer: K O.D. O.D. O.D. O.D. odel K0-00 K0-00 K0-00 K-00 K-00 odel K0-00 K0-00 K0-00 K-00 K-00 odel KT0-00 KT0-00 KT0-00 KT-00 KT-00 odel KU0-00 KU0-00 KU0-00 KU-00 KU ass T TS indicates the maximum diameter. ass T TS indicates the maximum diameter. ass T TS indicates the maximum diameter. ass T TS indicates the maximum diameter. 2 x 1 ø 2 ø ø.2 ø 2 x ø.2 3 x ø.2 3 x K KK D S T lu: K O.D. fittin size odel K0-0 K0-0 K0-0 K0- K0- K0- K ass T TS indicates the maximum diameter. fittin size fittin size odel K-0 K-0 K-0 K- K ass fittin size Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

8 Clean One-touch Fittins For Drivin ir ipin os Series K/KG Tubin Tubin material Tubin O.D. F, olyurethane ø, ø, ø, ø, ø FE, nylon and soft nylon, and not compatible with the clean series can also be used. owever, the deree of clean performance will be reduced. Specifications Series K Brass (electroless nickel plated) elease button: iht ray articulate eneration rade Fluid aximum operatin pressure (20 C) Operatin vacuum pressure roof pressure (20 C) mbient and fluid temperature Threads Grade 1 ir 1 a Note 2) 0 ka 3 a C to 0 C JIS B0203 (Taper for pipin) Oil Fluorine-based rease efer to particulate eneration rade classifications This falls outside of the rade because fluorine rease is applied to the internal seal materials. Note 2) The maximum operatin pressure is the value at 20 C. efer to the operatin pressure curve for other temperatures. Note 3) Do not use the fittins with a leak tester or for vacuum retention because they are not uaranteed for zero leakae. Series KG Stainless steel 30 elease button: iht blue ade to Order (efer to pae 2 for details.) articulate Generation Grade Classifications elation between Operatin Temperature and aximum Operatin ressure verae particle concentration articles/ft Grade Grade 3 Grade 2 Grade aximum operatin pressure a article diameter µm or less Operatin temperature C Note) efer to Features 2 in CT. E02-, SC neumatic Clean Series for details. 2 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

9 Clean One-touch Fittins Series K/KG ow to Order Clean One-touch fittins Symbol G Specifications Specifications (metal part materials) Brass (electroless nickel plated) Stainless steel 30 T Y U Construction K 0 01 odel ale connector, Straiht union Union elbow, ale elbow ale branch tee, Union tee ale run tee ale branch, Union "Y" lu-in reducer O.D. 0 ø 0 ø 0 ø ø ø ade to Order X3 X3 With pipe tape Grease-free ubber material: ED (Fluorine-coated) Gasket: -G3 (Stainless steel 31, Special FK) Note 2) With release bushin, Guide color: Natural Series KG: Compatible with products with only Note 2) ort size/ O.D. x / Thread 02 1/ connection 03 3/ 0 00 Same dia. 0 ø Tubin (rod) 0 ø Different dia. connection ø 0 (plu-in reducer) ø ø K 0 lu fittin size 0 ø 0 ø 0 ø ø ø Clean One-touch fittins K KK D S T type ale connector Component arts No Description Body With male connector Stud Chuck Guide With male connector elease button Collet Stopper Seal Bumper O-rin Gasket With male connector aterial Series K Series KG C30 (electroless nickel plated) Stainless steel 30 C30 (electroless nickel plated) Stainless steel 30 Stainless steel 30 C30 (electroless nickel plated) Stainless steel 30 (color: liht ray) Stainless steel 30 NB NB NB Stainless steel 30, NB (color: liht blue) Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

10 Series K/KG Dimensions ale Connector: K, KG () () O.D. x 0. 1/ 1/ x 0. 1/ 1/ 1/ 1/ 1/ 3/ 3/ odel K0- K0-01 K0-02 K0- K0-01 K0-02 K0-01 K0-02 K-02 K-03 K-03 K-0 KG0- KG0-01 KG0-02 KG0- KG0-01 KG0-02 KG0-01 KG0-02 KG-02 KG-03 KG-03 KG () ass T TS () eference dimension for after installation ale Elbow: K, KG () () O.D. odel T TS x 0. K0- KG / K0-01 KG / K0-02 KG x 0. K0- KG / K0-01 KG / K0-02 KG / K0-01 KG () / K0-02 KG / K-02 KG / K-03 KG / K-03 KG K-0 KG eference dimension for after installation 1 indicates the maximum diameter. Union Tee: KT, KGT () () O.D. odel T TS ass () ass x 0. KT0- KGT / KT0-01 KGT / KT0-02 KGT x 0. KT0- KGT / KT0-01 KGT / KT0-02 KGT / KT0-01 KGT () 1/ KT0-02 KGT / KT-02 KGT / KT-03 KGT / KT-03 KGT KT-0 KGT eference dimension for after installation 1 indicates the maximum diameter. 2 () x x Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

11 Clean One-touch Fittins Series K/KG Dimensions ale un Tee: KY, KGY () () O.D. x 0. 1/ 1/ x 0. 1/ 1/ 1/ 1/ 1/ 3/ 3/ KY0- KY0-01 KY0-02 KY0- KY0-01 KY0-02 KY0-01 KY0-02 KY-02 KY-03 KY-03 KY-0 odel KGY0- KGY0-01 KGY0-02 KGY0- KGY0-01 KGY0-02 KGY0-01 KGY0-02 KGY-02 KGY-03 KGY-03 KGY Note1) T TS ale Branch: KU, KGU () () O.D. x 0. 1/ 1/ x 0. 1/ 1/ 1/ 1/ 1/ 3/ 3/ eference dimension for after installation 1 indicates the maximum diameter. KU0- KU0-01 KU0-02 KU0- KU0-01 KU0-02 KU0-01 KU0-02 KU-02 KU-03 KU-03 KU-0 odel KGU0- KGU0-01 KGU0-02 KGU0- KGU0-01 KGU0-02 KGU0-01 KGU0-02 KGU-02 KGU-03 KGU-03 KGU Note1) T 2 1 TS 1 ass ass eference dimension for after installation indicates the maximum diameter () 1 2 () 1 2 () () 2 x x 1 2 ø ø x 2 x K KK D S T ø ø.2 Straiht Union: K, KG O.D. K0-00 K0-00 K0-00 K-00 K-00 odel KG0-00 KG0-00 KG0-00 KG-00 KG T 2 1 TS 1 ass x indicates the maximum diameter. Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

12 Series K/KG Elbow: K, KG O.D. K0-00 K0-00 K0-00 K-00 K-00 odel KG0-00 KG0-00 KG0-00 KG-00 KG ass T TS indicates the maximum diameter. ø 2 x ø.2 Union Tee: KT, KGT O.D. KT0-00 KT0-00 KT0-00 KT-00 KT-00 odel KGT0-00 KGT0-00 KGT0-00 KGT-00 KGT Union "Y": KU, KGU O.D. KU0-00 KU0-00 KU0-00 KU-00 KU-00 odel KGU0-00 KGU0-00 KGU0-00 KGU-00 KGU lu-in educer: K, KG ass T TS indicates the maximum diameter. ass T TS indicates the maximum diameter. 1 2 ø ø.2 ø 3 x ø.2 3 x O.D. fittin size odel K0-0 KG0-0 K0-0 KG0-0 K0-0 KG0-0 K0- KG0- K0- KG0- K0- KG0- K- KG ass T TS indicates the maximum diameter. fittin size lu: K fittin size odel ass K-0 K-0 K-0 K- K The plu is coom for series K, KG and K. fittin size 2 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

13 Series K/K/KG Specific roduct recautions 1 Be sure to read before handlin. efer to front matters and 9 for Safety Instructions and paes 13 to 1 for Fittins and Tubin recautions. Selection 1. lease consult with SC reardin fluids other than air, water and nitroen as. andlin 1. Store away from direct sunliht at 0 C or less. 2. Open the inner packae of double packain in a clean room or other clean environment. Installation of Threads Be sure to wrap sealin tape around the taper for both resin and metal. If used without sealin tape air leakae can occur. 1. Series K (with resin ) 1) Wrappin of pipe tape Wrap the pipe tape 2 to 3 times around the, leavin 1. to 2 rides exposed at the end of the. 2) Tihtenin fter tihtenin by hand, tihten an additional 2 to 3 turns usin a tihtenin tool. 2. Series K/KG (with metal ) 1) For fter tihtenin by hand, tihten approximately 1/ turn further usin a tihtenin tool. eference values for the tihtenin torque are 1 to 1. N m. Excessive tihtenin can cause air leakae due to damae or deformation of the asket, etc. Insufficient tihtenin can cause loose and air leakae, etc. Installation of Threads 2) Taper (1) Wrappin of pipe tape Wrap the pipe tape 2 to 3 times around the, leavin 1 rides exposed at the end of the. (2) When installin, tihten with the proper torque shown in the table below. s a rule, this corresponds to two or three turns with a tool after tihtenin by hand. size 1/ 1/ 3/ roper tihtenin torque (N m) to 9 to 1 to 2 2 to Tihtenin tools Tihten with an appropriate wrench usin the hexaon wrench flats on the body. osition the wrench on the base as close as possible to the. If the size of the wrench is not suitable for the hexaon wrench flats, the wrench flats may be crushed. Installation and emoval of Tubin 1. Installation of 1) Grease is not used due to the Series K oil-free specifications. For this reason, reater insertion force is required when is installed. In particular, polyurethane may fold when inserted due to its softness. old the end of the, and insert it all the way in slowly and securely. efer to dimension in the dimension drawins for uidance on the insertion depth of. 2. emoval of 1) The outside diameter of tubes that have been used at hih temperatures or for lon periods of time will expand, and in some cases pipe fittins cannot be reattached. Tubes that cannot be attached should be discarded and replaced with new ones. K KK D S T Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

14 Series K/K/KG Specific roduct recautions 2 Be sure to read before handlin. efer to front matters and 9 for Safety Instructions and paes 13 to 1 for Fittins and Tubin recautions. Operatin Environment Warnin 1. Do not use in environments or locations where there is a daner of damae to fittins and. For fittin and materials, refer to specifications and construction drawins, etc. 2. rovide shade in locations which receive direct sunliht. 1. Series K are special One-touch fittins for use on clean blowin and washin lines. lease consult with SC reardin other types of applications. Seal material: The durability of ED with respect to mineral oils is inferior, makin it unsuitable for pipin in eneral pneumatic equipment. Use Series K and KG for pipin to eneral pneumatic equipment. aintenance 1. Tihtenin of blow fittins (resin taper for pipin) Since Series K taper are made of resin, minute leakae may radually occur due to stress relaxation. erform periodic inspections, and if leakae is detected correct the problem by further tihtenin. If additional tihtenin becomes ineffective, replace the fittin with a new product. 2. Check for the followin durin reular maintenance, and replace components as necessary. a) Scratches, oues, abrasion, corrosion b) eakae, refer to item 3 reardin taper leakae. c) Twistin, flattenin or distortion of d) ardenin, deterioration or softness of 3. Do not repair or patch the replaced or fittins for reuse. 0 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

15 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

16 Clean One-touch Fittins Series K/KG ow to Order Clean One-touch fittins Symbol G Specifications Specifications (metal part materials) Brass (electroless nickel plated) Stainless steel 30 T Y U Construction K 0 01 odel ale connector, Straiht union Union elbow, ale elbow ale branch tee, Union tee ale run tee ale branch, Union "Y" lu-in reducer O.D. 0 ø 0 ø 0 ø ø ø ade to Order X3 X3 With pipe tape Grease-free ubber material: ED (Fluorine-coated) Gasket: -G3 (Stainless steel 31, Special FK) Note 2) With release bushin, Guide color: Natural Series KG: Compatible with products with only Note 2) ort size/ O.D. x / Thread 02 1/ connection 03 3/ 0 00 Same dia. 0 ø Tubin (rod) 0 ø Different dia. connection ø 0 (plu-in reducer) ø ø K 0 lu fittin size 0 ø 0 ø 0 ø ø ø Clean One-touch fittins K KK D S T type ale connector Component arts No Description Body With male connector Stud Chuck Guide With male connector elease button Collet Stopper Seal Bumper O-rin Gasket With male connector aterial Series K Series KG C30 (electroless nickel plated) Stainless steel 30 C30 (electroless nickel plated) Stainless steel 30 Stainless steel 30 C30 (electroless nickel plated) Stainless steel 30 (color: liht ray) Stainless steel 30 NB NB NB Stainless steel 30, NB (color: liht blue) Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

17 Series K/KG Dimensions ale Connector: K, KG () () O.D. x 0. 1/ 1/ x 0. 1/ 1/ 1/ 1/ 1/ 3/ 3/ odel K0- K0-01 K0-02 K0- K0-01 K0-02 K0-01 K0-02 K-02 K-03 K-03 K-0 KG0- KG0-01 KG0-02 KG0- KG0-01 KG0-02 KG0-01 KG0-02 KG-02 KG-03 KG-03 KG () ass T TS () eference dimension for after installation ale Elbow: K, KG () () O.D. odel T TS x 0. K0- KG / K0-01 KG / K0-02 KG x 0. K0- KG / K0-01 KG / K0-02 KG / K0-01 KG () / K0-02 KG / K-02 KG / K-03 KG / K-03 KG K-0 KG eference dimension for after installation 1 indicates the maximum diameter. Union Tee: KT, KGT () () O.D. odel T TS ass () ass x 0. KT0- KGT / KT0-01 KGT / KT0-02 KGT x 0. KT0- KGT / KT0-01 KGT / KT0-02 KGT / KT0-01 KGT () 1/ KT0-02 KGT / KT-02 KGT / KT-03 KGT / KT-03 KGT KT-0 KGT eference dimension for after installation 1 indicates the maximum diameter. 2 () x x Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

18 Clean One-touch Fittins Series K/KG Dimensions ale un Tee: KY, KGY () () O.D. x 0. 1/ 1/ x 0. 1/ 1/ 1/ 1/ 1/ 3/ 3/ KY0- KY0-01 KY0-02 KY0- KY0-01 KY0-02 KY0-01 KY0-02 KY-02 KY-03 KY-03 KY-0 odel KGY0- KGY0-01 KGY0-02 KGY0- KGY0-01 KGY0-02 KGY0-01 KGY0-02 KGY-02 KGY-03 KGY-03 KGY Note1) T TS ale Branch: KU, KGU () () O.D. x 0. 1/ 1/ x 0. 1/ 1/ 1/ 1/ 1/ 3/ 3/ eference dimension for after installation 1 indicates the maximum diameter. KU0- KU0-01 KU0-02 KU0- KU0-01 KU0-02 KU0-01 KU0-02 KU-02 KU-03 KU-03 KU-0 odel KGU0- KGU0-01 KGU0-02 KGU0- KGU0-01 KGU0-02 KGU0-01 KGU0-02 KGU-02 KGU-03 KGU-03 KGU Note1) T 2 1 TS 1 ass ass eference dimension for after installation indicates the maximum diameter () 1 2 () 1 2 () () 2 x x 1 2 ø ø x 2 x K KK D S T ø ø.2 Straiht Union: K, KG O.D. K0-00 K0-00 K0-00 K-00 K-00 odel KG0-00 KG0-00 KG0-00 KG-00 KG T 2 1 TS 1 ass x indicates the maximum diameter. Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

19 Series K/KG Elbow: K, KG O.D. K0-00 K0-00 K0-00 K-00 K-00 odel KG0-00 KG0-00 KG0-00 KG-00 KG ass T TS indicates the maximum diameter. ø 2 x ø.2 Union Tee: KT, KGT O.D. KT0-00 KT0-00 KT0-00 KT-00 KT-00 odel KGT0-00 KGT0-00 KGT0-00 KGT-00 KGT Union "Y": KU, KGU O.D. KU0-00 KU0-00 KU0-00 KU-00 KU-00 odel KGU0-00 KGU0-00 KGU0-00 KGU-00 KGU lu-in educer: K, KG ass T TS indicates the maximum diameter. ass T TS indicates the maximum diameter. 1 2 ø ø.2 ø 3 x ø.2 3 x O.D. fittin size odel K0-0 KG0-0 K0-0 KG0-0 K0-0 KG0-0 K0- KG0- K0- KG0- K0- KG0- K- KG ass T TS indicates the maximum diameter. fittin size lu: K fittin size odel ass K-0 K-0 K-0 K- K The plu is coom for series K, KG and K. fittin size 2 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

20 Series K/K/KG Specific roduct recautions 1 Be sure to read before handlin. efer to front matters and 9 for Safety Instructions and paes 13 to 1 for Fittins and Tubin recautions. Selection 1. lease consult with SC reardin fluids other than air, water and nitroen as. andlin 1. Store away from direct sunliht at 0 C or less. 2. Open the inner packae of double packain in a clean room or other clean environment. Installation of Threads Be sure to wrap sealin tape around the taper for both resin and metal. If used without sealin tape air leakae can occur. 1. Series K (with resin ) 1) Wrappin of pipe tape Wrap the pipe tape 2 to 3 times around the, leavin 1. to 2 rides exposed at the end of the. 2) Tihtenin fter tihtenin by hand, tihten an additional 2 to 3 turns usin a tihtenin tool. 2. Series K/KG (with metal ) 1) For fter tihtenin by hand, tihten approximately 1/ turn further usin a tihtenin tool. eference values for the tihtenin torque are 1 to 1. N m. Excessive tihtenin can cause air leakae due to damae or deformation of the asket, etc. Insufficient tihtenin can cause loose and air leakae, etc. Installation of Threads 2) Taper (1) Wrappin of pipe tape Wrap the pipe tape 2 to 3 times around the, leavin 1 rides exposed at the end of the. (2) When installin, tihten with the proper torque shown in the table below. s a rule, this corresponds to two or three turns with a tool after tihtenin by hand. size 1/ 1/ 3/ roper tihtenin torque (N m) to 9 to 1 to 2 2 to Tihtenin tools Tihten with an appropriate wrench usin the hexaon wrench flats on the body. osition the wrench on the base as close as possible to the. If the size of the wrench is not suitable for the hexaon wrench flats, the wrench flats may be crushed. Installation and emoval of Tubin 1. Installation of 1) Grease is not used due to the Series K oil-free specifications. For this reason, reater insertion force is required when is installed. In particular, polyurethane may fold when inserted due to its softness. old the end of the, and insert it all the way in slowly and securely. efer to dimension in the dimension drawins for uidance on the insertion depth of. 2. emoval of 1) The outside diameter of tubes that have been used at hih temperatures or for lon periods of time will expand, and in some cases pipe fittins cannot be reattached. Tubes that cannot be attached should be discarded and replaced with new ones. K KK D S T Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

21 Series K/K/KG Specific roduct recautions 2 Be sure to read before handlin. efer to front matters and 9 for Safety Instructions and paes 13 to 1 for Fittins and Tubin recautions. Operatin Environment Warnin 1. Do not use in environments or locations where there is a daner of damae to fittins and. For fittin and materials, refer to specifications and construction drawins, etc. 2. rovide shade in locations which receive direct sunliht. 1. Series K are special One-touch fittins for use on clean blowin and washin lines. lease consult with SC reardin other types of applications. Seal material: The durability of ED with respect to mineral oils is inferior, makin it unsuitable for pipin in eneral pneumatic equipment. Use Series K and KG for pipin to eneral pneumatic equipment. aintenance 1. Tihtenin of blow fittins (resin taper for pipin) Since Series K taper are made of resin, minute leakae may radually occur due to stress relaxation. erform periodic inspections, and if leakae is detected correct the problem by further tihtenin. If additional tihtenin becomes ineffective, replace the fittin with a new product. 2. Check for the followin durin reular maintenance, and replace components as necessary. a) Scratches, oues, abrasion, corrosion b) eakae, refer to item 3 reardin taper leakae. c) Twistin, flattenin or distortion of d) ardenin, deterioration or softness of 3. Do not repair or patch the replaced or fittins for reuse. 0 Courtesy of Steven Enineerin, Inc.-0 yan Way, South San Francisco, C ain Office: (0) Outside ocal rea: (00)

Clean One-touch Fittings. For Driving Air Piping. KPQ/KPG Series. Applicable Tubing. Tubing material. Specifications

Clean One-touch Fittings. For Driving Air Piping. KPQ/KPG Series. Applicable Tubing. Tubing material. Specifications Clean One-touch Fittins os For Drivin ir Pipin KP/KPG Series ubin ubin material PF, Polyurethane ubin O.D. ø, ø, ø, ø, ø FEP, nylon and soft nylon, and not compatible with the clean series can also be

More information

Recommended Applicable Tubing. Specifications. Particulate generation grade

Recommended Applicable Tubing. Specifications. Particulate generation grade Clean One-touch Fittins For Blowin Series K Recoended Tubin olyolefin: Series T Tubin material Soft polyolefin: Series Tubin O.D. ø, ø, ø, ø, ø olyurethane tubin: Series TU, Nylon tubin: Series T, and

More information

Recommended applicable tubing. Specifications. Operating vacuum pressure. 20 C to 80 C Threads. Principal parts material

Recommended applicable tubing. Specifications. Operating vacuum pressure. 20 C to 80 C Threads. Principal parts material Series K Clean one-touch fittings For blowing Recommended applicable olyolefin: Series T Tubing material Soft polyolefin: Series TS Tubing O.D. ø, ø, ø, ø, ø olyurethane Series TU, Nylon Series T, and

More information

3 configurations provide design solutions based on the operating conditions. Male Connector Type. Can be mounted directly onto equipment

3 configurations provide design solutions based on the operating conditions. Male Connector Type. Can be mounted directly onto equipment CAT.E20- A Check Valve with One-Touch Fittin Series AK/AKB confiurations provide desin solutions based on the operatin conditions ale Connector Type Can be mounted directly onto equipment Bushin Type Can

More information

Brass One-touch Fittings

Brass One-touch Fittings Brass One-touch Fittings Series KQB Fluid temperature: 5 to 0 C Grease-free material: FEP PF Nylon Soft nylon Polyurethane Polyolefin Electroless nickel plated (Brass parts): ade to Order (-X2) K D S Q

More information

Clean Speed Controller with One-touch Fitting

Clean Speed Controller with One-touch Fitting Clean Speed Controller with One-touch Fitting Series -FPQ/-FPG -FPG Series -FPQ Series Speed controllers for clean room use S R -FPQ: (electroless nickel plated) and -FPG: are now available as a series.

More information

One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting.

One-touch Fittings Manifold. Porting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch fitting. One-touch Fittings Manifold Series KM RoHS Compact piping possible. Manifold piping possible. Many varieties (0 types) are available. s give the most efficient operation. KM1 KM1 orting Rc female thread

More information

Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use

Series AS-FPQ/AS-FPG. Speed Controller with One-touch Fitting for Clean Room. Speed controllers for clean room use CAT.ES20-19 A Speed Controller with One-touch Fitting for Clean Room Series AS-FPQ/AS-FPG Series AS-FPG Series AS-FPQ Speed controllers for clean room use AS-FPQ: Brass (electroless nickel plated) and

More information

Miniature Tubing & Miniature Fittings

Miniature Tubing & Miniature Fittings T.S0- Miniature Tubin & Miniature Fittins Series TU/M O.D. ø x I.D. ø. Minimum bendin radius mm Tubin olor Variations lack White Red lue Yellow reen lear Four types of fittins are available. arb fittin

More information

Series KJ. Miniature One-touch Fittings. Applicable Tube

Series KJ. Miniature One-touch Fittings. Applicable Tube Guide 1 Collet Chuck ccepts nylon, soft nylon and polyurethane tubes. as large retaining force. Release button (Inch-Orange, etric-gray) ow disconnecting force. When the fitting is removed from the tubing,

More information

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod)

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter

More information

How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow

How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) Straight union. T Different dia. straight. F Female connector TX Male elbow One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter

More information

Filter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size.

Filter regulator. Accessory. Description. Symbol. B With bracket With round. Port size. (Without limit indicator) Body size. eries ow to Order opper, fluorine and silicon-free + Low particle generation il ote 1) ote 2) part no. lean series hread type Rc racket assembly ote ) ote 9) 1.0a 0.2a / -20 49-01 49-2-01 ilter regulator

More information

Regulator. Accessory. Description. Symbol. Nil. With bracket. B With round. Port size. (Without limit indicator) With set nut (For panel mount)

Regulator. Accessory. Description. Symbol. Nil. With bracket. B With round. Port size. (Without limit indicator) With set nut (For panel mount) eries R 2- ow to Order opper, fluorine and silicon-free + Low particle generation il hread type Rc 0 R 03 2 R 03 ody size / ith bracket Round pressure ith set nut tandard specifications odel luid roof

More information

Clean Regulator/Fluororesin Type

Clean Regulator/Fluororesin Type Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part

More information

Pilot Check Valve: Metal Body Type

Pilot Check Valve: Metal Body Type INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not

More information

Stainless Steel 316 One-touch Fittings

Stainless Steel 316 One-touch Fittings CT.ES50-2 Stainless Steel 31 One-touch Fittings aterial etal parts: Stainless steel 31 Seal parts: Special FK Can be used with steam Operating fluid temperature 5 to 0 C Grease-free tubing material FEP,

More information

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Flame resistant style Finger Valve SeriesVHK Large effective area: to mm 2 Small knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. Selection

More information

Coiling Tube with Twist-Proof Fitting

Coiling Tube with Twist-Proof Fitting http://www.pisco.co.jp FITTING CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Anti-Twisting Coiling Tube for Air Tool Coiling Tube with Twist-Proof Fitting 306 Avoid Twisted Tube Problem

More information

COMMON PRECAUTIONS Data Sheet - Be Sure To Read Before Handling Page 1 of 6

COMMON PRECAUTIONS Data Sheet - Be Sure To Read Before Handling Page 1 of 6 COMMON PRECAUTIONS Page 1 of 6 These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution",

More information

reduces flow setting time and setting errors!

reduces flow setting time and setting errors! Speed Controller with Indicator Numerical indication of handle rotation for flow rate reduces flow setting time and setting errors! New RoHS Indicator window Size Size or larger Indicator window Number

More information

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style

Specifications. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Component Parts. Standard style. Standard style Finger Valve eriesvhk Large effective area: to mm 2 mall knob operating force: 0.43 to 1.4 kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from

More information

Direct Operated Precision Regulator Modular Style. Standard Specifications

Direct Operated Precision Regulator Modular Style. Standard Specifications 1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com

More information

Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply.

Hand Valve Series. Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Control Open/Close for Air Supply. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Shut-off Valve (Residual Pressure Release Valve) Hand Valve Series 556 Control Open/Close for Air Supply. Release Residual

More information

Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100

Series SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100 Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to

More information

Specifications. JIS Symbol 2 port valve 3 port valve (A) 2 (A) 2. Construction. 2 port valve/series VHK2 3 port valve/series VHK3.

Specifications. JIS Symbol 2 port valve 3 port valve (A) 2 (A) 2. Construction. 2 port valve/series VHK2 3 port valve/series VHK3. Finger Valve eriesvhk Large effective area:.0 to 7.5 mm mall knob operating force: 0. to. kgfcm Poppet valve construction with few seal defects The series begins with the min. tube O.D. of. election from

More information

Filter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4

Filter Regulator 21 AW 30 K F 03 BG JN. Description. Without backflow function. Rc NPT 1/8 1/4 3/8 1/2 3/4 eries eries ilter Regulator ilter Regulator with ackflow unction ow to Order lean series opper, fluorine and silicon-free low particle generation ilter regulator 10 03 21 03 q w e r t y "" must always

More information

Prestolok PLM Metal Push-to-Connect Fittings

Prestolok PLM Metal Push-to-Connect Fittings Prestolok PM Metal Push-to-Connect ittings To meet your technical and environment requirements, Parker s Prestlok PM fittings offers the robustness, reliability and resistance to industrial fluids for

More information

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12 PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN

More information

Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure

Cautions : 1. Be careful when you release the Stop Fitting with some internal pressure The flow-shut mechanism will operate to stop the air flow when the tube is disconnected and will allow air flow when the tube is connected. The double-passage structure facilitates easy connection and

More information

Change Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design.

Change Valve. Push-In Fitting Type Three-way Changeover Valve. Changeover Air Direction by 90. Lightweight and Compact Design. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Three-way Changeover Valve Change Valve Changeover Air Direction by 90 Lightweight and Compact Design. Fine Operability and

More information

Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut

Regulator for 2 MPa ARX 20. How to Order. Bracket. Pressure gauge. Port size 1/8 1/4. Panel nut Regulator for 2 MPa RX 2 How to Order RX2 1 Regulator 1 Regulating pressure.5 to.85mpa {.51 to 8.7kgf/cm²}.5 to.3mpa {.51 to 3.1kgf/cm²} Thread type Nil N F Rc(PT) NPT (PF) Port size 1 2 ccessories/options

More information

F l o w c o n T R o l v a l v E S

F l o w c o n T R o l v a l v E S Composite Right Angle Flow Control Valves Series TMCU-TMVU-TMCO- BSP/METRIC Meter In, Meter Out, Needle Orifice G1/8, G1/, G3/8, G1/2 Banjo flow controllers Nominal diameters Ø 2-3.8-5.8-8 The Meter In,

More information

Series IRV1000/2000/3000

Series IRV1000/2000/3000 CAT.ES60-16 A Regulator Series /2000/3000 Allows adjustment of vacuum line pressure Regulator Series /2000/3000 3 sizes offered in the series Variations have been expanded to three sizes from only one

More information

Compact Manometer. Pressure measurements can easily be taken any time, anywhere. POWER LIGHT

Compact Manometer. Pressure measurements can easily be taken any time, anywhere. POWER LIGHT Compact Manometer Series PPA Pressure measurements can easily be taken any time, anywhere. G GS PPA Compact and lightweight Portable type with a lightweight of only about 100 g (unit 50 g, battery 50 g)

More information

Push-In Fitting Type with Stop Valve

Push-In Fitting Type with Stop Valve http://www.pisco.co.jp Push-In Fitting Type with Stop Valve 278 Push-In Fitting Type with Stop Valve for General Pneumatic Piping. Air Stop by Tube Disconnection. Easy Insertion and Disconnection by Double-passage

More information

30% (SMC comparison) Silencer. New. New. The M5 silencer is now added! The resin silencer is now a more compact size! Series AN.

30% (SMC comparison) Silencer. New. New. The M5 silencer is now added! The resin silencer is now a more compact size! Series AN. Silencer The M silencer is now added! Space saving New RoHS ctual size 6. mm mm Fingertip size The resin silencer is now a more compact size! Existing model Entire length reduced by up to 30% (SMC comparison)

More information

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8

More information

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance

More information

Ball Valve Series. Push-In Fitting Type Shut-off Valve. Control Open/Close Air Supply. Ensure Effective Area for Variety of Tube Dia.

Ball Valve Series. Push-In Fitting Type Shut-off Valve. Control Open/Close Air Supply. Ensure Effective Area for Variety of Tube Dia. http://www.pisco.co.jp VALVE TUBE MAKE-TO-ORDER PRODUTS Push-In Fitting Type Shut-off Valve Ball Valve Series 564 ontrol Open/lose Air Supply. Ensure Effective Area for Variety of Tube Dia. Easily Adjustable

More information

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,

More information

(1) Type. (2) Tube dia. (ød) : ø8mm (ø5/16in.) (3) Thread size (T) (4) Specification. Fluid medium. Air, water * 1, * 2, * 3 Max. operating pressure

(1) Type. (2) Tube dia. (ød) : ø8mm (ø5/16in.) (3) Thread size (T) (4) Specification. Fluid medium. Air, water * 1, * 2, * 3 Max. operating pressure This type of tube fitting comes in eight lengths to suit your applications. The tube fitting, provided with a hexagonal hole, can be easily installed using an Allen wrench, even in a narrow or limited

More information

Related Products: Auto Drain Valve. Model/Specifications. Model

Related Products: Auto Drain Valve. Model/Specifications. Model Related Products: Auto Drain Valve /600 Drainage is automatically discharged in a reliable manner, without requiring human operators. Highly resistant to dust and corrosion, operates reliably, and a bowl

More information

(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD

(1) Name of tube (2) Tube dia. (O.D./I.D.) (3) Tube length. (4) Tube color. Model UD0425. UD1290 O.D. I.D. (mm) UD1075 UD0860 UD The polyurethane tube, featuring excellent flexiblity, helps compact piping requiring small bending radius. The useful cut marks at 500mm interval are printed on the tube. Model UD0425 UD0640 UD0860 UD1075

More information

(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)

(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R) This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around

More information

Miniature Tubing & Miniature Fittings

Miniature Tubing & Miniature Fittings T.ES0- -UK Miniature Tubing & Miniature Fittings Series TU/M O.D. ø x I.D. ø. Minimum bending radius mm Tubing olor Variations lack White Red lue Yellow Green lear Four types of fittings are available.

More information

Booster Regulator/Air Tank

Booster Regulator/Air Tank Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed

More information

Push-In Fitting Type Pressure Gauge

Push-In Fitting Type Pressure Gauge http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 526 Compact Design. Pressure Indication by Tube Insertion into Push-In Fitting. Check Valve Silencer Controller

More information

Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.

Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0. Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu

More information

Push-In Fitting Type Silencer

Push-In Fitting Type Silencer http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 540 Reduce Exhaust Noise from Exhaust Port. Excellent Silencing Effect. Selection from 3 types. Push-In Fitting

More information

Air Saving Valve. Pressure Valve Flow Valve

Air Saving Valve. Pressure Valve Flow Valve Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction

More information

Insert Ring. Protection Ring from Tube Deformation. Protect tubes from deformation. Ultra soft tube is connectable to Fitting.

Insert Ring. Protection Ring from Tube Deformation. Protect tubes from deformation. Ultra soft tube is connectable to Fitting. http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Protection Ring from Deformation Insert Ring 668 Protect tubes from deformation. Ultra soft tube is connectable to Fitting. Necessary for the connection

More information

SeriesTRBU. Flame Resistant (Equivalent to UL-94 Standard V-0) FR Double Layer Polyurethane Tubing

SeriesTRBU. Flame Resistant (Equivalent to UL-94 Standard V-0) FR Double Layer Polyurethane Tubing CAT.E521- A Flame Resistant (Equivalent to UL-94 Standard V-0) FR Double Layer Polyurethane Tubing SeriesTRBU For general air and water piping in environments with sparks from spot welding, etc. Double

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

Vacuum Saving Valve Series ZP2V How to Order ZP2V A5 03 Connection thread symbol for the pad Male thread connection Symbol Thread Applicable fixed ori

Vacuum Saving Valve Series ZP2V How to Order ZP2V A5 03 Connection thread symbol for the pad Male thread connection Symbol Thread Applicable fixed ori Vacuum Saving Valve Series ZP2V Model Selection Select the quantity of vacuum saving valves that can be used with one vacuum generator. Selection Conditions Work piece: No leakage and several sizes Required

More information

Cautions : 1. Clogging of the element raises resistance to exhaust, thus lowering the

Cautions : 1. Clogging of the element raises resistance to exhaust, thus lowering the The Silencer, connected to the exhaust port of a device, suppresses the exhaust noise. The Silencer displays an excellent noise suppression effect. Three types are available for your selection. The element

More information

lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0

lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0 ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant

More information

Series ZFC. Air Suction Filter In-line Type with One-touch Fittings

Series ZFC. Air Suction Filter In-line Type with One-touch Fittings CAT.E832- A Air Suction Filter In-line Type with One-touch Fittings Series ZFC An in-line type air suction filter that prevents trouble in vacuum equipment due to contaminants in the air IN/OUT straight

More information

STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices

STC. Push-In Fittings & Polyurethane Tubing. Fine Quality. Precision Engineered Advanced Design. Excellent Prices Precision Engineered Advanced Design Push-In Fittings & Polyurethane Tubing Catalog: PUB 2012 PUB 07 FIT STC Push-In Fittings & Polyurethane Tubing Fine Quality Excellent Prices A 1 connects fluid power

More information

Clean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10

Clean Gas Filter. SF Series. Cartridge Type/Disposable Type IDFA IDFB IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC SF SFD LLB AD GD SFC10 Clean Gas Filter SF Series Cartridge Type/Disposable Type Disposable type SFC0 Disposable type SFB30 Cartridge type SFA0 SFA20 SFA30 HAA HAW AT IDU FS A B IDH ID IDG IDK AMG AFF AM AMD AMH AME AMF ZFC

More information

Maximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications

Maximum 0.85 MPa pressure setting Long-life, high flow perfect for balancer applications Outstanding performance in extremely low pressure and low pressure ranges from 0.003 to. Realizing high performance, energy saving, and compact size. Realize precise pressure control in a pressure range

More information

Piloted Non-Return Valves

Piloted Non-Return Valves ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product

More information

Pressure Gauge Series

Pressure Gauge Series Pressure Gauge Series Compact Design. Connection type In line Plug in Panel mount Threaded Model Designation (Example) GP C 15 U10 U 1 Type Pressure Gauge 1 Type 2 Series 4 Wrench size 3 Thread size/ Tube

More information

Compact Manometer. Pressure measurements can easily be taken any time, anywhere.

Compact Manometer. Pressure measurements can easily be taken any time, anywhere. 1 Compact Manometer Series PPA Pressure measurements can easily be taken any time, anywhere. Compact and lightweight Portable type with a lightweight of only about 100 g (unit 50 g, battery 50 g) can also

More information

(1) Type (2) Tube dia. (ød(1)) (3) Thread size (T) (4) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)

(1) Type (2) Tube dia. (ød(1)) (3) Thread size (T) (4) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R) When the primary pressure is introduced from the thread side, a reduced pressure comes out from the joint side. The compact desigh with a built-in quick-fitting joint makes flexibe layout possible. The

More information

Tube Cutter with Measuring tape built-in

Tube Cutter with Measuring tape built-in http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS Cutter with Measuring tape built-in 658 Series Cutter TUBE VALVE CONTROLLER FITTING Model Code of Cutter (Example) Cutter Model Code of Cutter Blade (Example)

More information

Cautions : 1. The gauge orientation on the GPU and GPM types can be changed by using

Cautions : 1. The gauge orientation on the GPU and GPM types can be changed by using The compact-size pressure gauge can be installed in small spaces. With the built-in tube fitting type, tube connection is the only necessary step before pressure indication. Fluid medium Indicated pressure

More information

M9N. Nil. s n. Type of auto switch. Refer to the table below for auto switch part numbers.

M9N. Nil. s n. Type of auto switch. Refer to the table below for auto switch part numbers. eries XP/XP ir slide table ø, ø1, ø12, ø1 ow to Order lean series 11 acuum suction type 11 XP 12 1 9N 22 XP 12 1 9N opper, fluorine and silicon-free + low particle generation 22 acuum suction type ore

More information

CHECK VALVES GPCVC Structural Diagram

CHECK VALVES GPCVC Structural Diagram CHECK VALVES Application - Check Valves permit airflow in one direction. - Used for maintaining the output pressure at a constant level. Feature - The check valves permit the airflow in one direction but

More information

Speed Controller Anti-spatter Series

Speed Controller Anti-spatter Series http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Flame-Retardant Spatter-proof 422 Adopting Flame-Retardant Resin (V-). Protective Cover to Protect from Sparks.

More information

Industrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings

Industrial Compression Style Fittings. Compression Fittings Compress-Align Fittings Brass Metric Compression Poly-Tite Fittings Hi-Duty Fittings Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial

More information

Static dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω).

Static dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω). http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for Anti-Static Environment Anti-Static 650 ESD Static dissipative Resin (Surface Resistivity : 10 4 ~10 7 Ω). Classification of conductivity region UE

More information

shutoff valves 900 Series psig Manual Shutoff Valves

shutoff valves 900 Series psig Manual Shutoff Valves 0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on

More information

MINIATURE COMBINATION UNITS Filter/regulators and lubricators P1H - G1/8, G1/4

MINIATURE COMBINATION UNITS Filter/regulators and lubricators P1H - G1/8, G1/4 P1H INITURE COINTION UNITS ilter/regulators and lubricators P1H - 1/8, 1/4 Combinations of filterregulators and lubricators can be ordered as pre-assembled units Complete control of filtration, regulation

More information

Precision Regulator. Series Model Regulating pressure range Port size Page

Precision Regulator. Series Model Regulating pressure range Port size Page Precision Regulator Series // Basic Type Air Operated Type Series Model Regulating pressure range Page Series Series Series Series Series.5 to MPa. to MPa. to.8 MPa /8 55.5 to MPa. to MPa /4 55. to.8 MPa.

More information

Industrial Compression Style Fittings

Industrial Compression Style Fittings Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial

More information

// ADapters GUIDelines

// ADapters GUIDelines // ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall

More information

Automatic Non-freeze Valve NF6

Automatic Non-freeze Valve NF6 172-65134MA-03 (NF6) 30 March 2015 ISO 9001/ ISO 14001 Manufacturer Kakogawa, Japan is approved by LRQA LTD. to ISO 9001/14001 Automatic Non-freeze Valve NF6 Copyright 2015 by TLV CO., LTD. All rights

More information

Model VR6 System. Installation, Operation & Maintenance

Model VR6 System. Installation, Operation & Maintenance Model VR6 System Installation, Operation & Maintenance General: All Archer Instruments chlorination systems are carefully designed and tested for years of safe, accurate field service. All Archer Instruments

More information

Speed Controller Constant Flow

Speed Controller Constant Flow http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type Speed Control Valve for Fixed Flow Rate Speed Controller 440 Adjust Actuator Speed. Suitable for Mass Production

More information

(2) Effective sectional area (no code for mini type) (3) Intake-side shape (no code for mini type) : Quick-fitting joint type : Taper pipe thread type

(2) Effective sectional area (no code for mini type) (3) Intake-side shape (no code for mini type) : Quick-fitting joint type : Taper pipe thread type In response to high-speed drive cylinder. The Quick Exhaust Valve comes with a built-in Quick Fitting. The Valve serves also as a shuttle valve. The exhaust port, having a throttling function, enables

More information

Prestolok PLS Stainless Steel Push-to-Connect Fittings

Prestolok PLS Stainless Steel Push-to-Connect Fittings Prestolok PS Stainless Steel Push-to-Connect ittings Parker s Prestolok PS fittings are ideal for conveying corrosive fluids in aggressive environments. Prestolok PS fittings provide corrosion resistance

More information

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8 and 1/4 PTF Port Sizes. Air line equipment. Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass

More information

Industrial Filter. FGD series

Industrial Filter. FGD series 1/8 P r o d u c t N a m e Industrial Filter Model/ Series/ Product Number FGD series FGD - - - Material Accessory Element length Element Port size Contents 2/8 Safety Instructions 3 Safety Instructions

More information

Series AMJ. Drain Separator for Vacuum

Series AMJ. Drain Separator for Vacuum CAT.E 827- Drain Separator for Vacuum Remove water droplets from air by simply installing in vacuum equipment connection lines. Effective for removing water droplets from the air sucked into vacuum pumps

More information

Series ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge

Series ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on

More information

E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm

E 212 E 222 Tank top mounting Connection up to G1¼ / -20 SAE Nominal flow rate up to 220 l/min / 58.1 gpm Return Filters E E Tank top mounting Connection up to G¼ / - SE up to l/min / 8. gpm Description pplication In the return line circuits of hydraulic systems. erformance features rotection against wear:

More information

DC5A. Cyclone Separator Trap for Air. Copyright 2015 by TLV Co., Ltd. All rights reserved ISO 9001/ ISO MA-03 (DC5A) 19 June 2015

DC5A. Cyclone Separator Trap for Air. Copyright 2015 by TLV Co., Ltd. All rights reserved ISO 9001/ ISO MA-03 (DC5A) 19 June 2015 172-65205MA-03 (DC5A) 19 June 2015 ISO 9001/ ISO 14001 Manufacturer Kakogawa, Japan is approved by LRQA LTD. to ISO 9001/14001 Cyclone Separator Trap for Air DC5A Copyright 2015 by TLV Co., Ltd. All rights

More information

Selection Materials. Check of Conditions When Using Hydraulic Cylinders 11. Selection of Cylinder Bore 12. Selection of Sealing Material

Selection Materials. Check of Conditions When Using Hydraulic Cylinders 11. Selection of Cylinder Bore 12. Selection of Sealing Material Materials Materials Check of Conditions When Using Hydraulic Cylinders of Cylinder Bore of Sealing Material Materials Check of Conditions When Using Hydraulic Cylinders Items Contents Materials. Set pressure

More information

(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type

(1) Type (2) Cylinder dia. (3) Gripper action : Single-acting closing gripper (normally open) (4) Holder type These are air finger models featuring light weight and miniature size. Blank fingers are available for the K type fingers as option. R-guide leaves no possibility of misalignment. The blank finger can

More information

Clean Air Filter Built-in Hollow Fibre Element

Clean Air Filter Built-in Hollow Fibre Element Clean Air Filter Built-in Hollow Fibre Element Nominal filtration rating: 0.0 µm (filtration efficiency 99.99%) Initial pressure drop: 0.0 MPa (at inlet pressure 0.7 MPa, maximum flow) Maximum operating

More information

Compressed Air Cleaning Filter Series

Compressed Air Cleaning Filter Series Compressed ir Cleaning Filter Series M /FF Series For Water Droplet, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the

More information

Tube for General Pneumatic Piping

Tube for General Pneumatic Piping http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for General Pneumatic Piping 608 Standard Fine Pressure, Wear, and Cold Resistance. NB for Hot Water and Thermal Oil. Multi-core Coiling Twin Coiling

More information

TECHNICAL DATA CAUTION

TECHNICAL DATA CAUTION Page 1 of 6 1. DESCRIPTION The Viking Model D-2 Accelerator is a quick-opening device, with an integral anti-flood assembly, used to increase the operating speed of a differential type dry pipe valve.

More information

Torque Specifications

Torque Specifications SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005

More information

Tube for Clean Environment Polyurethane Tube Clean-Room Package

Tube for Clean Environment Polyurethane Tube Clean-Room Package http://www.pisco.co.jp TUBE MAKE-TO-ORDER PRODUCTS for Clean Environment Polyurethane Clean-Room Package 642 Fine Flexibility. Suitable for Small Bending Radius in General Pneumatic Piping. Cleaned and

More information

Model SPCøD-T SPC4-M5 SPC4-M50 * 1 SPC4-M6 SPC4-02 SPC6-M5 SPC6-M6 SPC6-01 SPC6-02 SPC16-03

Model SPCøD-T SPC4-M5 SPC4-M50 * 1 SPC4-M6 SPC4-02 SPC6-M5 SPC6-M6 SPC6-01 SPC6-02 SPC16-03 This series uses a special stainless steel, which corrosive resistance is equivalent to SUS303 stainless steel, made up Cr19~21%, and Mo1.5~2.5%. Accordingly, when strength is required it is suited to

More information

ROTARY JOINTS NHRC Structural Diagram

ROTARY JOINTS NHRC Structural Diagram OTAY JOINTS Application - Used for supplying compressed air at swiveling or swinging connections. - Used for index tables and industrial robots. Feature - Built in bearings, suitable for high-speed swiveling

More information

Model PCøD-TSUS PC4-M6SUS PC4-01SUS PC4-02SUS PC6-M5SUS PC6-M6SUS PC6-01SUS PC6-02SUS PC16-03SUS

Model PCøD-TSUS PC4-M6SUS PC4-01SUS PC4-02SUS PC6-M5SUS PC6-M6SUS PC6-01SUS PC6-02SUS PC16-03SUS This tube fitting serves best where strength is required or the atmosphere contains chemicals. (It can be used with chemicals depending on service conditions.) Fluid medium Air, water * 1, * 2, other *

More information

Process Pump. PAF3000 Series/PAF5000 Series

Process Pump. PAF3000 Series/PAF5000 Series Process Pump PAF3 Series/PAF Series RoHS The excellent corrosion resistance is achieved due to the new PFA wetted material construction! PPS/PFA dual construction, withstand pressure and heat cycle performance

More information