Specialist PPE Head Protection

Transcription

1 Specialist PPE Head Protection

2 An essential part of personal protection in many working environments, our range of fully compliant helmets and bump caps provides the reassurance that they will perform to the highest level in the event of any accident. A stylish range that remains comfortable for the entire working day or night. HOW TO PROTECT YOURSELF? Identify the risks you need to protect against such as falling items from above or bumps. The safety helmet has three functions: 1. Anti-penetration - for an effective skull protection. 2. Shock absorber - the helmet or bump cap absorbs the impact. 3. Deflector - the design makes it possible to deflect the fall of an object from the top of the head. There is in addition a selection of accessories which can be added that offer s the addition of face and hearing protection. Please contact us to assist with your selection and to discuss your protection requirements.

3 Head Protection Granite Peak Safety Helmet - Mountain Helmet Style ABS safety helmet. Less encumbrance. Light. Polyamide cradle: 3 textile bands with 8 fixing points. Thermoformed sweat band. Sold with 3 point chin strap. Specially designed for working at height. White, Blue, Yellow TCGRANITEP +50oc -10oc 440vac MM Granite Wind Safety Helmet - Mountain Helmet Style ABS safety helmet. Special system of fins which give protection against splashes and optimized surface ventilation. Polyamide cradle: 3 textile bands with 8 fixing points. Thermoformed sweat band. Sold with 3 point chin strap. Specially designed for working at height. White, Blue, Yellow, Orange, Red TCZIRCON +50oc -20oc MM Zircon 1 Safety Helmet with Manual UV-resistant high density polyethylene (HDPE) safety helmet. Low density (LDPE) polyethylene cradle with 8 fixing points. Sweat band. Electrical Insulation up to 1000 V.A.C. or 1500 V.D.C. Standard holes for accessories. Anchorage for chin straps with 2 or 4 points. Manual: Head sizes 53/63 cm Orange, White, Blue, Grey, Yellow, Red, Green TCZIRCON +50oc -10oc 440vac GREY

4 Quartz Up III Ventilated Safety Helmet UV-resistant high density polypropylene (PP) safety helmet. Polyamide cradle: 3 textile bands with 8 fixing points. Foam sweat band. 2 possible positions of the headband (high/low) for better comfort. Electrical Insulation up to V.A.C. or V.D.C. Orange, White, Blue, Yellow, Red, Green TCQUARTZUP3 MM +50oc -30oc 440vac Quartz Up IV Ventilated Safety Helmet Ventilated UV-resistant high density polypropylene (PP) safety helmet. Polyamide cradle: 3 textile bands with 8 fixing points. Foam sweat band. 2 possible positions of the headband (high/low) for better comfort. Orange, White, Blue, Yellow, Red, Green TCQUARTZUP4 MM +50oc -30oc 440vac Baseball Diamond V Abs Safety Helmet Baseball Cap Shape ABS safety helmet with innovative design. Tested in reverse position. Polyamide cradle: 3 fabric bands with 8 attachment points. Terry sweatband. 2 possible positions around the head (high/low) for better comfort. Retro-reflective band. Electrical insulation 1000 VAC/1500 VDC. Sold with 4 chin attachment points. Innovative button adjustment: head size 53 to 63 cm. Orange, White, Blue, Black, Yellow, Red, Green TCBBDIAMONDV MM LD +50oc -20oc 440vac BLACK

5 Head Protection Air Coltan Impact-Resistant Baseball Style Bump Cap Impact resistant baseball style bump cap. Highly ventilated polyester/ Cotton with mesh fabric. Lined with polyethylene and comfortable EVA foam shell to absorb shocks. Available with 5cm or 7cm peak Buckle: Head sizes 55/62 cm Navy Blue, Navy Blue/Black, Light Grey/Dark Grey, Grey/Yellow, Fluorescent Yellow/Grey, Black/Red TCAIRCOLTAN EN812 / GREY NAVY /BLACK FLUORESCENT / GREY DARK GREY/LIGHT GREY Coltan Bump Cap Impact resistant baseball style bump cap. Highly ventilated polyester/ Cotton with mesh fabric. Lined with polyethylene and comfortable EVA foam shell to absorb shocks. Available in 3cm, 5cm, or 7cm peak Buckle: Head sizes 55/62 cm Navy blue TCCOLTAN EN812

6 Protective helmets for industry MANDATORY Impact*: Force transmitted to the headform must not exceed 5 kn at the fall of an object of 5 kg from a 1m height. The impact energy of the helmet at the end of the test is 49 J. Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull. Flammability: the helmet should not burn with flame emission more than 5 seconds after removal of the flame. EN812 Bump caps for industry. MANDATORY Impact*: This PPE protects against impacts from knocks against structures or objects. It does not protect from the impact of a falling object at all. The impact energy of the cap at the end of the test reached J. Penetration*: the tip of the mass used in the test (0.5 kg over 0.5 m) must not come into contact with the skull. * The impact and penetration tests are performed at room temperature, at 50 C and at -10 C * The impact and penetration tests are performed at room temperature, at 50 C and at -10 C OPTIONAL In extreme temperatures: impact and penetration tests are conducted at room temperature at 150 C, at -20 C or -30 C. Protects against lateral compression. The maximum deformation of the helmet should be 40 mm. Protects against accidental short-term contact with a live electrical conductor up to 440 VAC Resistance to molten metal splashes OPTIONAL In extreme temperatures: impact and penetration tests are conducted at room temperatur at -20 C or -30 C. Protects against accidental short-term contact with a live electrical conductor up to 440 VAC. Flammability: the helmet must not burn with flame emission more than 5 seconds after removal of the flame (F marking). Electrical insulation helmets for use in low voltage environment. EEC Directive Council Directive of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment (). MANDATORY Electrically insulating helmets for use near energized equipment not exceeding 1000 VAC or 1500 VDC (appliance class 0). Used simultaneously with other electrically insulating protective equipment, these helmets prevent dangerous currents passing through to the person s head. These optional electrical insulation tests are more stringent than the and they complement them. (2 triangle marking, Class 0). ISO9001, ISO9002 Unit 16 Coneygree Estate, Tipton, West Midlands, DY4 8XP T: E: productinfo@phs.co.uk W: PHS Group a company registered in England & Wales. Company Registration No