WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 Kg.

Size: px
Start display at page:

Download "WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 Kg."

Transcription

1 MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - AND Kg. 01 AIR OPERATED OIL PUMPS AND KITS Iquip modit iriuscidunt nos niam ver ip AIR OPERATED PISTON PUMPS FOR OIL AND LUBRICANTS PUMPMASTER 2 OIL PUMPS Reraessi. Dolobore volorpe rcilit lut luptat wis ad magniam dolore miniam do con elit utem dolortis PUMPMASTER 4 OIL PUMPS dolorerit ver sed dolutem vullandrem adigna am esenit velisim iliquat at velent augiam dolore faciliquis nostrud te magnim ea core magna feugait wisit PUMPMASTER aute commolo 6 OIL rerosto PUMPS ent. lor. sum... exercil lutat, quipisim vel irillandio consecte min eum diat, sum oil euisi pump connection kits OIL PUMP ACCESSORIES

2 Cat, Patum este temquam rempriusqui satill AIR OPERATED PISTON PUMPS FOR OIL AND LUBRICANTS It all starts with the pump; the heart of the system. The choice of a pump requires a wide variety of factors to be considered so that your system will provide years of dependable service. SAMOA has engineered a broad offering of oil pumps to handle a wide variety of applications. This range of pumps will fit original container sizes and bulk storage tanks; covering applications ranging from the transfer of oil to very large centralized systems. Why choose an air operated pump? Compressed air provides the best power source because it allows the pump to stall against fluid back pressure. When the dispense handle is opened, the fluid pressure drops in the system, the pump automatically starts and oil flows. When the dispense handle is closed, back pressure is created in the system. When the amount of back pressure equals the force of the compressed air pushing on the pump, the system stops or stalls. When using other power sources such as electric or hydraulic, the system must have pressure sensing switches, bypass loops and relief valves, or other methods to control the motor and pressure. balanced piston pump - differential air motor SAMOA s oil pumps are designed to provide years of dependable service. The in-line balanced design insures that a maximum amount of energy is directed into the pump. The balanced design provides an even distribution of loads allowing for long seal life. All SAMOA oil pumps have a double acting design, pumping product on both the upstroke and the downstroke. The differential air motor has proven to be the most durable design for oil pumps. This simple yet effective method to create the air motor reciprocating motion, requires very few moving parts and works well even with adverse compressed air supply conditions. Pressure and Volume An important, and often confusing, aspect of selecting a pump is how to determine which pump ratio and what pump size to select. The pump ratio is calculated by dividing the surface area of the air motor piston by the surface area of the fluid piston. Fluid pressure is determined by multiplying the pump ratio by the compressed air pressure. This determines the fluid pressure at the fluid outlet of the pump. Fluid pressure is required to get the oil from the pump outlet to the dispense point. Restrictions such as the length and diameter of pipes, hoses, hose reels, solenoid valves, pulse meters, control handles, and other system components create friction in the system. Sufficient fluid pressure is required to overcome this friction, in order to get the oil to the dispense point. Pump size determines the amount of fluid flowing through the piston pump outlet during each cycle of the pump. Three different sizes of pumps with the same ratio will each deliver a different flow rate. A variety of factors help determine the pump size to choose for your system. How many dispense points will be operating at the same time? What kind of work will you be doing; filling a crankcase or filling a hydraulic reservoir?, etc. For many applications, the following pump selection recommendations are generally valid: OIL DISPENSING OUTLETS Total pumping distance Up to m Up to m More than m Up to m More than m Piping recommendation (diam x wall thichness) 22 x 1, mm 28 x 1, mm 3 x 2 mm 28 x 1. mm 3 x 2 mm PUMP TYPE PumpMaster 2/1:1 pressure ratio Can be used for distances up to m in systems without hose reels PumpMaster 2/3:1 pressure ratio YES PumpMaster 4/3:1 pressure ratio YES YES YES PumpMaster 4/:1 pressure ratio YES YES PumpMaster 6/:1 pressure ratio YES YES This data provides a general pump selection guide. Each application varies and should be carefully analyzed for special conditions that may require a pump selection other than the recommendations listed. These special conditions can include viscosity of product pumped, ambient temperature tube diameter and layout, simultaneous operation of several dispensing outlets, or volume delivery requirements. Piping recommendations are based on the use of hose reels with hose end meters. For motor oil (SAE W-40) flow delivery is approx. l/min and the flow delivery with gear oil (SAE 80/90) approx. 2 l/min. Figures are based on a room temperature of ºC and piping routed indoors.

3 PUMPMASTER 2 These pumps are high efficiency air operated pumps specifically designed for lubricant transfer, oil distribution packages and small systems. They have an innovative air motor with a patented air valve. The air valve provides the pump with a very fast reciprocating action that contributes to improved pump performance. The air motor s unique design avoids the dead volumes present in most air motors and overall air consumption is reduced by up to 40%. The PumpMaster 2 air motor has been designed to work in even in the most demanding environments, such as with wet, contaminated air supply. PUMPMASTER 4 These heavy duty air operated pumps are designed for lubricant distribution systems. Their proven highly reliable air motor and high performance pump makes this pump family the preferred choice in the most demanding oil distribution systems. PumpMaster 4 air motors have a built in port for placing a pressure relief valve to prevent damage in the system caused by over pressure due to oil thermal expansion. PUMPMASTER 6 These pumps are high performance, high pressure pumps for applications with long piping distances, cold temperatures or when low air pressure would limit pump performance. Severe duty construction for maximum reliability. 11

4 01 PUMPMASTER 2 oil pumps 31 1 oil pumps, pressure ratio 1:1 Double acting air operated low pressure pumps for transferring lubricants and other non-corrosive fluids. Pumps include height adjustable bung adaptor 2" BSP (M) for tank or drum mounting. Typically used in all types of industries for fast and clean transfer of lubricants. Products handled Synthetic and mineral based lubricants. Transmission Fluid. Hydraulic oil. Diesel. Grease up to NLGI-2 (long pump only). Markets Vehicle maintenance centres. Fleet service facilities. Manufacturing plants. Agriculture. Marine. Mining and construction. Models Application pump tube height Total height Weight Part No. WALL MOUNTED, STUB PUMP 2 mm 0 mm 3 kg L (16 GAL) DRUM 72 mm 1.0 mm kg 36 1 L ( GAL) DRUM 9 mm 1. mm,2 kg 32 1 Technical data Pressure ratio 1:1 dimensions (mm) Model A (mm) B (mm) C (mm) D (mm) Air pressure operating range Air consumption (1) Maximum fluid outlet pressure 3 - bar (40 to 140 psi) 33 NL/min (1.8 cfm) bar (140 psi) Air motor diameter 1 mm (2") Air motor effective diameter 3 mm (1.4") Air motor stroke 7 mm (3") Number of cycles per minute (2) 160 Maximum free flow delivery (3) Air inlet Fluid inlet (short pump only) Fluid outlet Wetted and seal materials Noise level (4) l/min (14.3 US gpm) 1/4" NPSM (F) 1" NPSM (F) 3/4" NPSM (F) Aluminum / Steel / Zinc / NBR / Acetal / Polyurethane 80 db (1) Maximum air consumption with 7 bar air inlet pressure and free delivery. (2) Number of cycles per minute for a flow rate of l/min (.3 US gpm). (3) Maximum free delivery at 7 bar. (4) Maximum noise level measured at 1 m from the pump, 7 bar air pressure and free delivery. DIMENSIONS SAE 30 - ºC CAPACITY Cycles / min AIR CONSUMPTION b c d a HEAD BAR PSI bar - psi 6 bar - 90 psi bar - 70 psi 3, , , , ,9 Gal / min 7 bar 6 bar bar psi 90 psi 70 psi Litres / min ,00 7 7, 12

5 PUMPMASTER 2 oil pumps 01 oil pumps, pressure ratio 3: Double acting air operated medium pressure pumps for dispensing lubricants from mobile units, oil distribution packages and small systems. Pumps are capable of pumping all types of lubricants, even those of high viscosity. Pumps include height adjustable bung adaptor 2" BSP (M) (PN ) except Typically used in workshops, service stations, fast lube centres, etc. Products handled Synthetic and mineral based lubricants. Hydraulic oil. Gear oil. Transmission Fluid. Markets Vehicle maintenance centres. Fleet service facilities. Manufacturing plants. Agriculture. Marine. Models Application pump tube height Total height Weight Part No. STUB PUMP mm 49 mm 3,0 kg 33 1 WALL MOUNTED STUB PUMP* mm 49 mm 3,0 kg L (16 GAL) DRUM 700 mm 99 mm 3,9 kg 38 1 L ( GAL) DRUM 90 mm 1. mm 4,2 kg 34 1 * Pump with no bung adaptor. For wall mounting using 4 M6 screws and bracket Air pressure operating range Air consumption (1) Maximum fluid outlet pressure Technical data Pressure ratio 3:1 3 - bar (40 to 140 psi) 0 NL/min (17.6 cfm) 30 bar (4 psi) Air motor diameter 1 mm (2") Air motor effective diameter 3 mm (1.4") Air motor stroke 7 mm (3") Number of cycles per minute (2) 17 Maximum free flow delivery (3) Air inlet Fluid inlet (short pump only) Fluid outlet Wetted and seal materials Noise level (4) 3 l/min (9.3 US gpm) 1/4" NPSM (F) 3/4" BSP (F) 1/2" NPSM (F) Aluminum / Steel / Zinc / NBR / PTFE 80 db (1) Maximum air consumption with 7 bar air inlet pressure and free delivery. (2) Number of cycles per minute for a flow rate of l/min (2.7 US gpm). (3) Maximum free delivery at 7 bar. (4) Maximum noise level measured at 1 m from the pump, 7 bar air pressure and free delivery. SAE 30 - ºC CAPACITY Cycles / min 4 0 HEAD Gal / min BAR PSI 7 bar - psi 6 bar - 90 psi bar - 70 psi Litres / min dimensions (mm) Model A (mm) B (mm) C (mm) D (mm) bar 6 bar bar psi AIR CONSUMPTION psi 70 psi DIMENSIONS b c d a 13

6 01 PUMPMASTER 4 oil pumps oil Iquip pumps, modit pressure iriuscidunt ratio nos 3:1niam ver ip Double acting air operated medium pressure and high volume pumps for dispensing lubricants in medium size installations including multiple dispensing points with simultaneous operation. Pumps are capable of pumping all types of lubricants, even those of high viscosity. Pumps include height adjustable bung adaptor 2" BSP (M) for drum and tank mounting and a built in port for connecting a pressure relief valve (PN ). Typically used in workshops, service stations, fast lube centres, fleet maintenance in mining, agriculture, armed forces, construction, trains, etc, in medium length installations with simultaneous operation outlets. Products handled Synthetic and mineral based lubricants. Gear oil. Hydraulic oil. Transmission Fluid. Models Markets Vehicle maintenance centres. Fleet service facilities. Manufacturing plants. Agriculture, mining and construction. Lube trucks. Marine. Application pump tube height Total height Weight Part No. WALL MOUNTED, STUB PUMP mm 8 mm 6,3 kg L ( GAL) DRUM 9 mm 1.29 mm 8,3 kg Technical data Pressure ratio 3:1 Air pressure operating range Air consumption (1) 3 - bar (40 to 140 psi) 67 NL/min (23.8 cfm) Dimensions (mm) Model A (mm) B (mm) C (mm) 2 2 D (mm) 9 DIMENSIONS Maximum fluid outlet pressure 30 bar (4 psi) Air motor diameter 88 mm (3.") Air motor effective diameter 60 mm (2.4") Air motor stroke mm (4") Number of cycles per minute (2) 140 Maximum free flow delivery (3) Air inlet Fluid inlet (short pump only) Fluid outlet Wetted and seal materials Noise level (4) 42 l/min (11.1 US gpm) 3/8" NPSM (F) 1" BSP (F) 3/4"NPSM (F) Aluminum / Steel / Zinc / Polyurethane / NBR / PTFE 93 db (1) Maximum air consumption with 7 bar air inlet pressure and free delivery. (2) Number of cycles per minute for a flow rate of l/min (2.7 US gpm). (3) Maximum free delivery at 7 bar. (4) Maximum noise level measured at 1 m from the pump, 7 bar air pressure and free delivery. SAE 30 - ºC CAPACITY Cycles / min AIR CONSUMPTION b a HEAD bar - psi 6 bar - 90 psi bar - 70 psi c d 0 0 PSI BAR , ,7 Gal / min 7 bar 6 bar bar psi 90 psi 70 psi Litres / min 14

7 PUMPMASTER 4 oil pumps 01 oil Iquip pumps, modit pressure iriuscidunt ratio nos :1niam ver ip Double acting air operated high pressure pumps for dispensing lubricants in large size installations including multiple dispensing points with simultaneous operation. Pumps are capable of pumping all types of lubricants, even those of high viscosity. Pumps include height adjustable bung adaptor 2" BSP (M) for drum and tank mounting and a built in port for connecting a pressure relief valve (PN ). Typically used in workshops, service stations, fast lube centres, fleet maintenance in mining, agriculture, armed forces, construction, trains, etc, in medium large installations even with simultaneous operation outlets. Products handled Synthetic and mineral based lubricants. Gear oil. Hydraulic oil. Transmission Fluid. Markets Vehicle maintenance centres. Fleet service facilities. Manufacturing plants. Mining and construction. Lube trucks. Marine. Models Application pump tube height Total height Weight Part No. WALL MOUNTED, STUB PUMP 278 mm 663 mm,0 kg L ( GAL) DRUM 9 mm 1. mm 7,0 kg Technical data Pressure ratio :1 Air pressure operating range 3 - bar (40 to 140 psi) Air consumption (1) 67 NL/min (23.8 cfm) Maximum fluid outlet pressure bar (700 psi) Air motor diameter 88 mm (3.") Air motor effective diameter 60 mm (2.4") Air motor stroke mm (4") Number of cycles per minute (2) 14 Maximum free flow delivery (3) 30 l/min (8 US gpm) Air inlet Fluid inlet (short pump only) Fluid outlet Wetted and seal materials Noise level (4) 3/8" NPSM 1" BSP 3/4" NPSM Aluminum / Steel / Zinc / Polyurethane / NBR / PTFE 9 db (1) Maximum air consumption with 7 bar air inlet pressure and free delivery. (2) Number of cycles per minute for a flow rate of l/min (2.7 US gpm). (3) Maximum free delivery at 7 bar. (4) Maximum noise level measured at 1 m from the pump, 7 bar air pressure and free delivery. SAE 30 - ºC CAPACITY dimensions (mm) Model A (mm) 663 1, B (mm) C (mm) D (mm) DIMENSIONS Cycles / min AIR CONSUMPTION HEAD PSI BAR bar - psi 6 bar - 70 psi bar - 90 psi Gal / min 7 bar 6 bar bar psi 90 psi 70 psi 0 Litres / min 2 30 b c d a

8 01 pumpmaster 4 oil pumps OIL Iquip PUMP, modit PRESSURE iriuscidunt RATIO nos 8:1niam ver ip Double acting air operated high-pressure pump for dispensing lubricants in applications requiring high pressure and low flow rates, such as medium to large size installations including multiple dispensing points with no simultaneous use. Pump is capable of pumping all types of lubricants, even those of high viscosity. Pumps include height adjustable bung adaptor 2" BSP (M) for drum or tank mounting and a built in port for connecting a pressure relief valve (PN ). Typically used in workshops, service stations, fast lube centres, fleet maintenance in mining, agriculture, armed forces, construction, trains, etc. Products handled Synthetic and mineral based lubricants. Hydraulic oil. Gear oil. Transmission fluid. Corrosion protection fluids. Markets Vehicle maintenance centres. Fleet service facilities. Manufacturing plants. Marine. Mining and construction. Lube trucks. Models Application pump tube height Total height Weight Part No. WALL MOUNTED, STUB PUMP 242 mm 627 mm,2 kg Technical data Pressure ratio 8:1 Air pressure operating range 3 - bar (40 to 140 psi) Air consumption (1) 67 NL/min (23.8 cfm) Maximum fluid outlet pressure 80 bar (1,1 psi) Air motor diameter 88 mm (3.") Air motor effective diameter 60 mm (2.4") Air motor stroke mm (4") Number of cycles per minute (2) 17 Maximum free flow delivery (3) 22 l/min (.8 US gpm) Air inlet 3/8" NPSM (F) Fluid inlet 3/4" BSP (F) Dimensions (mm) A (mm) 627 B (mm) 38 C (mm) 34 D (mm) 242 Fluid outlet Wetted and seal materials Noise level (4) 3/4" NPSM (F) Aluminum / Steel / Zinc / NBR / PTFE 9 db (1) Maximum air consumption with 7 bar air inlet pressure and free delivery. (2) Number of cycles per minute for a flow rate of l/min (2.7 US gpm). (3) Maximum free delivery at 7 bar. (4) Maximum noise level measured at 1 m from the pump, 7 bar air pressure and free delivery. DIMENSIONS SAE 30 - ºC capacity AIR CONSUMPTION b d a BAR Cycles / min HEAD PSI bar / psi 6 bar - 90 psi bar - 70 psi Gal / min ,32 80, 38 13,6 7 bar 6 bar bar psi 90 psi 70 psi 0 2 Litres / min c34 16

9 pumpmaster 6 OIL PUMPS 01 OIL Iquip PUMP, modit PRESSURE iriuscidunt RATIO nos :1niam ver ip Double acting air operated high-pressure pump for dispensing lubricants in medium to large size installations including multiple dispensing points with simultaneous use. Pump is capable of pumping all types of lubricants, even those of high viscosity. Pump can be flange mounted to a wall bracket or tank. It can also be mounted to 2" bung opening on a drum or tank using an optional bung adaptor (PN ). Typically used in workshops, fleet maintenance in mining, armed forces, construction, trains, etc. Products handled Synthetic and mineral based lubricants. Gear oil. Hydraulic oil. Transmission Fluid. Markets Vehicle maintenance centres. Fleet service facilities. Manufacturing plants. Marine. Mining and construction. Lube trucks. Models Application pump tube height Total height Weight Part No. WALL MOUNTED, STUB PUMP 2 mm 698 mm 13,2 kg Air pressure operating range Air consumption (1) Maximum fluid outlet pressure Technical data Pressure ratio :1 3 - bar (40 to 140 psi) 1.0 NL/min (37.1 cfm) bar (1, psi) Air motor diameter 160 mm (6.3") Air motor effective diameter 1 mm (4.3") Air motor stroke mm (4") Number of cycles per minute (2) 8 Maximum free flow delivery (3) Air inlet Fluid inlet Fluid outlet Wetted and seals materials Noise level (4) 30 l/min (8 US gpm) 1/2" NPSM (F) 1 1/2" BSP (F) 3/4"NPSM (F) Aluminum / Steel / Zinc / NBR / PTFE / Polyurethane 82, db (1) Maximum air consumption with 7 bar air inlet pressure and free delivery. (2) Number of cycles per minute for a flow rate of l/min (2.7 US gpm). (3) Maximum free delivery at 7 bar. (4) Maximum noise level measured at 1 m from the pump, 7 bar air pressure and free delivery. SAE 30 - ºC capacity BAR HEAD , 2, 1, 0, PSI Cycles / min bar - psi 6 bar - 90 psi bar - 70 psi Gal / min , Litres per minute AIR CONSUMPTION , 7 bar 6 bar bar psi 90 psi 70 psi Dimensions (mm) A (mm) 698 B (mm) 483 C (mm) 4 D (mm) 2 DIMENSIONS B D C A 17

10 01 oil pump CONNECTION KITS PumpMaster 2 pump connection kit For PM2 3:1 pumps : 1 m air hose with 1/4" BSP (MM) fittings : Automatic quick air coupling 1/4" BSP (F) : 1/2" BSP (M) x 1/4" BSP (F) connection adapter : Quick air connector 1/4" BSPT (M) : 1, m x Ø 1/2" oil hose, 1/2" BSP (MM). Recommended options: 240 0: Air filter + regulator, 0-12 bar. 1/4" BSP (FF) : 1/4" BSPT (MM) connection adaptor. 9 : 1/2" BSP (FF) ball valve : Pressure relief valve for PM2 and PM4 pumps (60 bar - 1/4" BSP (M)) PumpMaster 4 pump connection kit For PM4 3:1 and :1 pumps : 1 m air hose with 1/2" BSP (M) - 3/8" BSP (M) fittings : Automatic quick air coupling 3/8" BSP (F) : Quick air connector 3/8" BSPT (M) : 1, m x Ø 3/4" oil hose, 3/4" BSP (MM). Recommended options: 241 1: Air filter + regulator, 0-12 bar. 3/8" BSP (FF) : 3/8" BSPT (MM) connection adaptor : 3/4" BSP (FF) ball valve : Pressure relief valve for PM2 and PM4 pumps (60 bar - 1/4" BSP (M) PumpMaster 6 pump connection kit For PM6 :1 pumps. 362 : 1 m air hose with 1/2" BSP (MM) : Automatic quick air coupling 1/2" BSP (F) : Quick air connector 1/2" BSP (M) : 1, m x Ø 3/4" oil hose, 3/4" BSP (MM). Recommended options: 241 1: Air filter + regulator, 0-12 bar. 3/8" BSP (FF) : Air lubricator 3/8" BSP (F) - 1/2 "BSP (F) : 1/2" BSP (MM) connection adaptor : 3/4" BSP (FF) ball valve : Pressure relief valve for :1 pumps. 367 Suction kits for wall mounted pumps Suction kit for litre drums and litre IBCs for PumpMaster 2/3:1 pressure ratio pumps 360 3: Wall bracket for PumpMaster 2/3:1 pressure ratio flange mounted pumps x 4: M6 screw for fixing the pump to the wall bracket x 4: M6 washer for fixing the pump to the bracket : Suction assembly for l drums and l IBCs. 367 Suction kit for litre drums and litre IBCs for PumpMaster 4/3:1 and :1 pressure ratio pumps 360 2: Wall bracket for PumpMaster 4 pumps with 2" bung opening : Suction assembly for l drums and l IBCs : 1" BSP (M) x 3/4" BSP (F) connection adapter Suction kit for litre drums and litre IBCs for PumpMaster 6/:1 pressure ratio pumps 360 9: Wall bracket for PumpMaster 6/:1 pressure ratio flange mounted pumps : Suction assembly for l drums and litres IBCs. Connection thread 1-1/2" BSP (M). 18

11 oil pump CONNECTION KITS TANK MOUNTED PUMPMASTER 2 3:1 pressure ratio pump KIT Tank mounted pump kit 3:1 ratio To install directly onto metal tanks with a 2" BSP (F) top bung opening. Maximum tank interior height: mm. 33 1: 3:1 stub pump : PumpMaster 2 connection kit for 3:1 pumps : 1. mm suction tube. WALL MOUNTED PUMPMASTER 2 3:1 pressure ratio pump KIT Wall mounted pump kit for litre drums 3:1 ratio The wall mounted pump and the suction assembly allows a fast and clean drum replacement : 3:1 stub pump : PumpMaster 2 connection kit for 3:1 pumps : litres drum suction kit for wall mounted pumps. DRUM MOUNTED PUMPMASTER 2 3:1 pressure ratio pump KIT 379, litre drums mounted pump kit 3:1 ratio To install directly onto litre drums oil. 34 1: 3:1 pump for litre drums : PumpMaster 2 connection kit for 3:1 pumps. Pump kits include all hoses and adaptors required for connecting an oil pump to the air supply and the oil distribution line. Recommended options for PumpMaster 2/3:1 pump kits: 240 0: Air filter + regulator, 0-12 bar, 1/4" BSP (FF). 9 : 1/2" BSP (FF) ball valve : 1/4" BSPT (MM) connection adaptor : Pressure relief valve, 1/4" BSP (M) - 60 bar opening. When mounted to the pump body, prevents damage in the system caused by over pressure produced by oil thermal expansion (1 ºC increase in temperature can cause up to bar increase in system pressure). 19

12 01 oil pump CONNECTION KITS DRUM MOUNTED PUMPMASTER 4 3:1 pressure ratio pump KIT , litre drums mounted pump kit 3:1 ratio To install directly onto litre drums oil : 3:1 pump for litre drums : PumpMaster 4 connection kit for 3:1 and :1 pumps. WALL MOUNTED PUMPMASTER 4 3:1 pressure ratio pump KIT 379 Wall mounted pump kit for litre drums 3:1 ratio The wall mounted pump and the suction assembly allows a fast and clean drum replacement : 3:1 stub pump : PumpMaster 4 connection kit for 3:1 and :1 pumps. 367 : Wall installation kit for l drums. TANK MOUNTED PUMPMASTER 4 3:1 pressure ratio pump KIT Tank mounted pump kit 3:1 ratio To install directly onto metal tanks with a 2" BSP (F) top bung opening. Maximum interior height: mm : 3:1 stub pump : PumpMaster 4 connection kit for 3:1 and :1 pumps. 368 : 1. mm suction tube. Pump kits include all hoses and adaptors required for connecting an oil pump to the air supply and the oil distribution line. Recommended options for PumpMaster 4/3:1 pump kits: 241 1: Air filter + regulator, 0-12 bar. 3/8" BSP (F) - 1/2" BSP (F) : 3/4" BSP (FF) ball valve : 1/2" BSPT (MM) connection adaptor : Pressure relief valve 1/4" BSP (M) - 60 bar opening. When mounted to the pump body, prevents damage in the system caused by over pressure produced by oil thermal expansion (1 ºC increase in temperature can cause up to bar increase in system pressure).

13 oil pump CONNECTION KITS TANK MOUNTED PUMPMASTER 4 :1 pressure ratio pump KIT Tank mounted pump kit :1 ratio To install directly onto metal tanks with a 2" BSP (F) top bung opening. Maximum interior height: mm : :1 stub pump : PumpMaster 4 connection kit for 3:1 and :1 pumps. 368 : 1. mm suction tube. WALL MOUNTED PUMPMASTER 4 :1 pressure ratio pump KIT Wall mounted pump kit for litre drums :1 ratio The wall mounted pump and the suction assembly allows a fast and clean drum replacement : :1 stub pump : PumpMaster 4 connection kit for 3:1 and :1 pumps. 367 : Wall installation kit for l drums. DRUM MOUNTED PUMPMASTER 4 :1 pressure ratio pump KIT 379 4, litre drums mounted pump kit :1 ratio To install directly onto l oil drums : :1 pump for l drums : PumpMaster 4 connection kit for 3:1 and :1 pumps. Pump kits include all hoses and adaptors required for connecting an oil pump to the air supply and the oil distribution line. Recommended options for PumpMaster 4/:1 pump kits: 241 1: Air filter + regulator, 0-12 bar. 3/8" BSP (F) - 1/2" BSP (F) : 3/4 BSP (FF) ball valve : 1/2" BSPT (MM) connection adaptor : Pressure relief valve 1/4" BSP (M) - 60 bar opening. When mounted to the pump body, prevents damage in the system caused by over pressure produced by oil thermal expansion (1 ºC increase in temperature can cause up to bar increase in system pressure). 21

14 01 oil pump CONNECTION KITS DRUM MOUNTED PUMPMASTER 6 :1 pressure ratio pump KIT , litre drums mounted pump kit :1 ratio To install directly onto litre oil drums : :1 stub pump : Suction tube for l drums : PumpMaster 6 connection kit for :1 pumps : l drum cover for PumpMaster 6 pumps. WALL MOUNTED PUMPMASTER 6 :1 pressure ratio pump KIT Wall mounted pump kit for tanks :1 ratio For use with tanks with a 2" BSP (F) lower, or bottom-feed, connection : :1 stub pump : PumpMaster 6 wall bracket. 94 6: 2" BSP (M) - 1" BSP (F) connection adaptor. 94 : 1" BSP (MM) connection adaptor : 1" BSP (FF) ball valve. 362 : 1 m x Ø 1" suction hose, 1" BSP (MF) with a 90º connector : 1" BSP (M) - 1 1/2" (M) connection adapter : PumpMaster 6 connection kit for :1 pumps. TANK MOUNTED PUMPMASTER 6 :1 pressure ratio pump KIT Tank mounted pump kit -:1 ratio To install directly onto metal tanks with a 2" BSP (F) top bung opening. Maximum interior height: mm : :1 stub pump : Suction tube for tanks : PumpMaster 6 connection kit for :1 pumps : 2" BSP (M) bung adaptor. Pump kits include all hoses and adaptors required for connecting an oil pump to the air supply and the oil distribution line. Recommended options for PumpMaster 6/:1 pump kits: 241 1: Air filter + regulator, 0-12 bar. 3/8" BSP (F) - 1/2" BSP (F) : Air lubricator, 3/8" BSP (F) - 1/2" BSP (F) 9 303: 3/4" BSP (FF) ball valve : 1/2" BSPT (MM) connection adaptor : Pressure relief valve for mounting at the pump outlet. 60 bar opening. When mounted to the pump outlet, prevents damage in the system caused by overpressure produced by oil thermal expansion (1 ºC increase in temperature can cause up to bar increase in system pressure). 22

15 oil pump accessories 01 suction assemblies suction hoses Suction tubes Suction assemblies for wall mounted short pumps. Assemblies include Ø 42 suction tube with foot valve, height adjustable 2" bung adaptor and 2 m x 3/4" (19 mm) rubber connection hose. Connection thread 3/4" BSP (M) Suction assembly For l drums and l IBCs, mm suction tube. Option for PumpMaster 4 pumps: : 1" BSP (M) x 3/4" BSP (M) connection adaptor Suction assembly For tanks, mm suction tube. Option for PumpMaster 4 pumps: : 1" BSP (M) x 3/4" BSP (M) connection adaptor Suction assembly For l drums and l IBCs, mm suction tube. 1 1/2" BSP (M) connection adaptor for use with PumpMaster 6 pumps , 3 m spring reinforced transparent suction hose for l drums and l IBCs Includes height adjustable 2" bung adaptor and a 90º connection elbow 3/4" BSP (M) to connect to a short pump , 3 m spring reinforced transparent suction hose with foot valve For l drums and l IBCs. Includes height adjustable 2" bung adaptor, 90º elbow 3/4" BSP (M) to connect to a short pump and foot valve. 362, 1 m rubber hose for connecting a pump to a tank 1" BSP (M) connections on both sides, with a 90º connector on one side. For PumpMaster 2 pumps (3:1 pressure ratio) Ø 22 mm suction tubes with 3/4" BSP (M) thread : 660 mm length for l drums : 1. mm length for tanks. For PumpMaster 2 (1:1 pressure ratio) and PumpMaster 4 pumps Ø 28 mm suction tubes with 1" BSP (M) thread : 660 mm length for l drums. 368 : 1. mm length for tanks. For PumpMaster 6 pumps Ø 42 mm suction tubes with 1 1/2" BSP (M) thread : 660 mm length for l drums : 1. mm length for tanks. Wall brackets BUNG ADAPTORS Wall bracket For PumpMaster 2 and PumpMaster 4 pumps with 2" bung adaptor Wall bracket For PumpMaster 2 pump Wall bracket For PumpMaster 6 flange mounted pumps Floor bracket For PumpMaster 2 and PumpMaster 4 pumps. Recommended for use with tanks having lower, or bottom-feed, connections " BSP (F) connection thread, with collar to clamp the pump tube. Adjusts to any 2" drum or tank openning Bung adaptor for PM2/3:1 pumps Ø 34 mm Bung adaptor for PM2/1:1 and PM4/3:1 pumps Ø 2 mm Bung adaptor for PM4/:1 pumps Ø 42 mm Bung adaptor for PM6/:1 pumps Ø 4 mm. 23

16 01 oil pump accessories Air line accessories connection adaptors pressure relief valves For protection against system pressure increase due to oil thermal expansion (1ºC increase in temperature can cause bar increase in system pressure). 60 bar (870 psi) valve opening pressure. Posibility to connect either a Ø 1/4" hose with a clamp or a hose with 1/8" BSP (F) fitting as return line to the tank. For PumpMaster 2 pumps Combined air filter and pressure regulator. 1/4" BSP (FF) Air pressure regulator 0-12 bar, 1/4" BSP (FF). For PumpMaster 4 and PumpMaster 6 pumps Combined air filter and pressure regulator. 1/2" BSP (F) - 3/8" BSP (F) Air pressure regulator 0-12 bar. 1/4" BSP (FF) Air filter + lubricator + regulator 1/2" BSP (F) - 3/8" BSP (F) Air lubricator 3/8" BSP (F). 1/2" BSP (F). Connection adaptors Required when connecting air accessories to a pump , 1/4" BSP (M) x 1/4" BSP (M) , 1/2" BSP (M) x 1/4" BSP (F) , 3/8" BSP (M) x 3/8" BSP (M) , 1/2" BSP (M) x 1/2" BSP (M). Air hoses For PumpMaster 2 pumps Air hose, 0,6 m 1/4" BSP (MM) Air hose, 1,0 m 1/4" BSP (MM) Air hose, 1, m 1/4" BSP (MM). For PumpMaster 4 pumps Air hose, 0,6 m 3/8" BSP (M) 1/2" BSP (M) Air hose, 1,0 m 3/8" BSP (M) - 1/2" BSP (M) Air hose, 1, m 3/8" BSP (M) - 1/2" BSP (M). For PumpMaster 6 pumps 362 Air hose, 1,0 m 1/2" BSP (MM) Air hose, 1, m 1/2" BSP (MM). Air valves 9 302, 1/4" BSP (FF), needle valve , 1/4" BSP (FF) , 3/8" BSP (FF.) 9 319, 1/2" BSP (FF). Required when connecting oil hoses to pumps 94 90, 1/4" BSP (MM) , 3/8" BSP (MM) , 1/2" BSP (MM). 94 1, 3/4" BSP (MM). 94, 1" BSP (MM) , 2" BSP(M) - 1 1/2" BSP (M) , 1 1/2" BSP (M) - 1" BSP (M). 94 2, 1" BSP (M) - 3/4" BSP (M). 94 4, 3/4" BSP (M) - 1/2" BSP (M). 94 7, 1/2" BSP (M) - 3/8" BSP (M). 94 6, 2" BSP(M) - 1" BSP (F) , 1 1/4" BSP (M) - 3/4" BSP (M) , 3/8" BSP (M) - 1/4" BSP (M) , 1" BSP (M) - 3/4" BSP (F) , 3/4" BSP (M) - 1/2" BSP (F). 94 6, 1/2" BSP (M) - 3/8" BSP (F) , 1/2" BSP (M) - 1/4" BSP (F) , 3/4" BSP (M) - 3/4" BSP (F) 90º , 1/2" BSP (MM) 90º. Medium pressure, nitrile rubber hoses reinforced with one steel braid. Swaged fittings, swivelling nut and double male adaptor at both ends. Part No. Length Internal Ø Fitting threads Working pressure 362 1,0 m 1/2" 1/2" BSP (MM) bar (1,4 psi) , m 1/2" 1/2" BSP (MM) bar (1,4 psi) ,0 m 1/2" 1/2" BSP (MM) bar (1,4 psi) ,0 m 1/2" 1/2" BSP (MM) bar (1,4 psi) ,0 m 1/2" 1/2" BSP (MM) bar (1,4 psi) ,0 m 1/2" 1/2" BSP (MM) bar (1,4 psi) 362 1,0 m 1/2" 1/2" BSP (MM) bar (1,4 psi) 362 1,0 m 1/2" 1/2" BSP (MM) bar (1,4 psi) 362 1,0 m 3/4" 3/4" BSP (MM) bar (1,4 psi) , m 3/4" 3/4" BSP (MM) bar (1,4 psi) ,0 m 3/4" 3/4" BSP (MM) bar (1,4 psi) ,0 m 3/4" 3/4" BSP (MM) bar (1,4 psi) Part No. Connection threads oil hoses and valves VALVES Working pressure 9 3 3/8" BSP (FF) 6 bar (930 psi) 9 1/2" BSP (FF) 6 bar (930 psi) /4" BSP (FF) 40 bar (70 psi) " BSP (FF) 40 bar (70 psi) /4" BSP (FF) 2 bar (360 psi) /2" BSP (FF) 2 bar (360 psi) " BSP (FF) 2 bar (360 psi) Pressure relief valve For PumpMaster 2 and PumpMaster 4 pumps Pressure relief valve For PumpMaster 4 and PumpMaster 6 pumps 3/4" BSP (MF). Oil line filters Oil line Y strainer, 1/2" BSP (FF) Oil line Y strainer, 3/4" BSP (FF). 24

MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. 02 AIR OPERATED grease PUMPs AND KITS

MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. 02 AIR OPERATED grease PUMPs AND KITS MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 2 AND 5 KG. 2 AIR OPERATED grease PUMPs AND KITS Iquip modit iriuscidunt nos niam ver ip Air operated piston pumps for grease.......................... 26

More information

04 HOSE REELS MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG.

04 HOSE REELS MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. MOBILE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. REELS Iquip modit iriuscidunt nos niam ver ip 000 000 hose reels general information........................ 44 Reraessi. Dolobore volorpe rcilit

More information

04 HOSE REELS MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG.

04 HOSE REELS MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. REELS Iquip modit iriuscidunt nos niam ver ip 000 000 hose reels general information........................ 44 Reraessi. Dolobore volorpe

More information

MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. 04 HOSE REELS

MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. 04 HOSE REELS MOBILE GREASE UNITS WITH PUMPMASTER 3+3 PUMPS - 20 AND 50 KG. HOSE REELS Iquip modit iriuscidunt nos niam ver ip hose reels general information......................... 000... 000. 46 501 series double

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

BIMBAR INFLATABLE PACKERS AND ACCESSORIES

BIMBAR INFLATABLE PACKERS AND ACCESSORIES BIMBAR INFLATABLE PACKERS AND ACCESSORIES Geopro supplies a complete range of inflatable packers in nine different diameters from 28 up to 170mm. All our packers made of BIMBAR rubber technology are reinforced

More information

KEG PUMP. Range of Electric Keg Pumps

KEG PUMP. Range of Electric Keg Pumps KP KEG PUMP Range of Electric Keg Pumps Electric Keg (Drum) Pumps for Grease KEG PUMP Versatile range of Interlube electric grease pumps for industrial and off-road applications The KP keg pump is available

More information

Plant, components and devices for very high and high pressures (7000 bar and over)

Plant, components and devices for very high and high pressures (7000 bar and over) Plant, components and devices for very high and high pressures (7000 bar and over) HIGH PRESSURE GAS BOOSTER INTRODUCTION Multi-coupling system gas booster operate on the simple but efficient principle

More information

Air Amplifiers & SYSTEMS

Air Amplifiers & SYSTEMS Air Amplifiers & SYSTEMS We Accept VISA, MasterCard and American Express Air Amplifiers Point-of-Use Air Solutions Maximator air amplifiers are designed to boost plant air pressure or increase the supply

More information

OWNER S TECHNICAL MANUAL

OWNER S TECHNICAL MANUAL EL SERIES OWNER S TECHNICAL MANUAL DP7002 1 Air Operated Diaphragm Pump Description The DP7002 1 air operated diaphragm pump is the ideal device for the pumping, transfer and dispensing of chemical liquids,

More information

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10

VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10 / ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications

More information

Inflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer

Inflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump

More information

TECHNICAL ACCESSORIES

TECHNICAL ACCESSORIES A.R.I. VALVES S-050P AIR PLASTIC RELEASE 16 BAR Automatic Component A.R.I patent, Rolling Seal Mechanism: Dramatically reduces the possibility of obstruction by debris. Discharges high air flow rates upto

More information

Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.

Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw. Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces

More information

Moving Fluids Concept and Theory

Moving Fluids Concept and Theory Moving Fluids Concept and Theory Graco, Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 1995 Graco Inc. Form No. 321-037 12/95 Rev 2 SL Training 11/14 Understanding Your Customer s Situation Characteristics

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential

More information

The Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times

The Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times Tseries Series AB AB Air Air Boosters Boosters The Compact, Portable, Efficient and Economical Solution to boost Shop Compressed Air Pressure by 2 or 3 times.01/1 MANIFOLD MOUNTED VALVES FOR EASY SERVICING

More information

Diaphragm pumps. Krautzberger GmbH / Subject to change

Diaphragm pumps. Krautzberger GmbH / Subject to change Diaphragm pumps e MP 400 with pressure equalisation container, material filter and material pressure regulator r MP 100 t MP 400 u MP 560 with mobile frame i MP 560 o Mobile frame t e r u i o 243 Diaphragm

More information

Beamex PG PRESSURE GENERATORS. Beamex PGM PGV PGC PGHH PGPH PGL

Beamex PG PRESSURE GENERATORS. Beamex PGM PGV PGC PGHH PGPH PGL Beamex PG PRESSURE GENERATORS 97 Beamex PGM PGV PGC PGHH PGPH PGL Beamex PG pressure generators are portable hand-operated pressure generators and ultimate field calibration pumps 98 Calibration pumps

More information

E 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm

E 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when

More information

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9

Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance

More information

Operating Instructions Models and Hydrostatic Test Pumps

Operating Instructions Models and Hydrostatic Test Pumps Operating Instructions Models 36454 and 364540 Hydrostatic Test Pumps 36454 DIMENSIONS: 24 (61cm) L x 19 (48cm) W x 19.5 (50cm) H WEIGHT: 135 lbs 61.5 kg PUMP: Twin piston: Positive displacement type Inlet

More information

Displacement 12, , Maximum flow rate (at 1450 rpm) bar.

Displacement 12, , Maximum flow rate (at 1450 rpm) bar. 00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment

More information

TECHNICAL DATA. Q = C v P S

TECHNICAL DATA. Q = C v P S Page 1 of 13 1. DESCRIPTION The Viking 6 Model G-6000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler

More information

Operating Instructions Models and Hydrostatic Test Pumps

Operating Instructions Models and Hydrostatic Test Pumps Operating Instructions Models 33100 and 33101 Hydrostatic Test Pumps 33100 DIMENSIONS: WEIGHT: PUMP: MOTOR: CONTROL: GAUGE: DISCHARGE HOSE: 16 (40cm) L x 22 (55cm) W x 18 (45cm) H 87 lbs., 39.5 kg Triplex

More information

// ADapters GUIDelines

// ADapters GUIDelines // ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall

More information

Prestige Water Equipment Ltd.

Prestige Water Equipment Ltd. The Prestige range of water softeners complements the range of water pre-treatment products and services. Use of water softening minimises the problems caused by hard water scale such as reduced heat transfer

More information

TECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13

TECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13 Page 1 of 13 1. Description The Viking 2 Model G-2000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler

More information

Hydraulic comparison test pump Models CPP1000-X, CPP1600-X

Hydraulic comparison test pump Models CPP1000-X, CPP1600-X Calibration Hydraulic comparison test pump Models CPP1000-X, CPP1600-X WIKA data sheet CT 91.12 for further approvals see page 2 Applications Calibration service companies and service industry Maintenance

More information

E 094 E 103 E 143 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 135 l/min / 35.7 gpm

E 094 E 103 E 143 Tank top mounting Connection up to G1 / -16 SAE Nominal flow rate up to 135 l/min / 35.7 gpm Return Filters E 9 E E Tank top mounting Connection up to G / -6 SAE Nominal flow rate up to 5 l/min / 5.7 gpm Description Application In the return line circuits of hydraulic systems. Performance features

More information

Locator Locator-D-Lux Air-Saver G1 Air-Saver G2

Locator Locator-D-Lux Air-Saver G1 Air-Saver G2 170663_air_saving_products 17-02-2011 16:42 Pagina 1 Locator Locator-D-Lux Air-Saver G1 Air-Saver G2 AIR SAVING PRODUCTS 170663_air_saving_products 17-02-2011 16:42 Pagina 2 170663_air_saving_products

More information

Pneumatic valve islands

Pneumatic valve islands Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented

More information

E 328 E 498 Tank top mounting Connection up to G1½ and SAE 2 Nominal flow rate up to 600 l/min

E 328 E 498 Tank top mounting Connection up to G1½ and SAE 2 Nominal flow rate up to 600 l/min Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ and SE Nominal flow rate up to 6 l/min Description pplication For operation in units with hydrostatic drives, when the return flow

More information

Leak-Free Load-Control Valve SAE ½ psi flange

Leak-Free Load-Control Valve SAE ½ psi flange Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control

More information

Series IRV1000/2000/3000

Series IRV1000/2000/3000 CAT.ES60-16 A Regulator Series /2000/3000 Allows adjustment of vacuum line pressure Regulator Series /2000/3000 3 sizes offered in the series Variations have been expanded to three sizes from only one

More information

3-Way Safety Block DSV

3-Way Safety Block DSV 3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with

More information

DEWATERING PUMP SOLUTIONS. Pneumatic pumps

DEWATERING PUMP SOLUTIONS. Pneumatic pumps DEWATERING PUMP SOLUTIONS Pneumatic pumps PUMP UP YOUR BUSINESS A pneumatic pump is a great choice when failure is not an option. They re easy to use, safe and can handle almost anything you throw at them.

More information

SECTION VEHICLE SERVICE EQUIPMENT

SECTION VEHICLE SERVICE EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 11 11 16 SPEC WRITER NOTES: 1. Use this section only for NCA projects. 2. Delete between //----// if not applicable to project. Also delete any other item or

More information

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08 Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size

More information

Operating Instructions Models 36200, , 46200, Hydrostatic Test Pumps

Operating Instructions Models 36200, , 46200, Hydrostatic Test Pumps Operating Instructions Models 36200, 362000, 46200, 462000 Hydrostatic Test Pumps 46200 DIMENSIONS: 28 (70cm) L x 24 (60cm) W x 38 (87.5cm) H WEIGHT: PUMP: ENGINE: CONTROL: GAUGE: DISCHARGE HOSE: INTAKE

More information

3:1 High Ratio Oil Pump W. Extn. Kit

3:1 High Ratio Oil Pump W. Extn. Kit 3:1 High Ratio Oil Pump W. Extn. Kit OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

E 158 E 198 E 248. Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min e d

E 158 E 198 E 248. Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min e d R e t u r n - S u c t i o n F i l t e rs E 158 E 198 E 248 Tank top mounting Connection up to G11 / 4 Nominal flow rate up to 250 l/min 20.90-5e 0.0-2d D e s c r i p t i o n Application For operation in

More information

Electrically Operated Pressure-Relief Cartridge, Size 10

Electrically Operated Pressure-Relief Cartridge, Size 10 Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description

More information

TECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY

TECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY Page 1 of 13 1. DESCRIPTION The Viking 3 Model G-3000 Dry Valve Riser Assembly is equipped with a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry

More information

4/2 way Pneumatic Solenoid Valve

4/2 way Pneumatic Solenoid Valve 4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11

More information

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for Excavators Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

More information

ROUGHNECK II Pumpless Drain

ROUGHNECK II Pumpless Drain SERVICE BULLETIN SB4027 Rev. K 08/18 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent

More information

HIGH PRESSURE DRILLING FLUID PUMP

HIGH PRESSURE DRILLING FLUID PUMP 1 HDF 200/250-280 HIGH PRESSURE DRILLING FLUID PUMP Dynaset HDF pump gives great water power with small amount of water in relation to its size. As self-priming it is productive in hard environment. Small

More information

Booster Regulator/Air Tank

Booster Regulator/Air Tank Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed

More information

Process Pump. PAF3000 Series/PAF5000 Series

Process Pump. PAF3000 Series/PAF5000 Series Process Pump PAF3 Series/PAF Series RoHS The excellent corrosion resistance is achieved due to the new PFA wetted material construction! PPS/PFA dual construction, withstand pressure and heat cycle performance

More information

TWO POST RAM PACKAGE 5 GALLON READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT.

TWO POST RAM PACKAGE 5 GALLON READ THIS MANUAL CAREFULLY BEFORE INSTALLING, OPERATING OR SERVICING THIS EQUIPMENT. OPERATOR S MANUAL TP0411G2XXXXXXXX INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. RELEASED: 2-15-10 INCLUDE MANUALS: AF0411GXXXXXX-XX-X Two-Ball Pump (97999-1496), 66731-X Follower Assembly (pn REVISED:

More information

Advanced Fluid Handling Cart Owner s Manual

Advanced Fluid Handling Cart Owner s Manual Advanced Fluid Handling Cart IMPORTANT Please read this carefully and thoroughly before installing and operating your Advanced Fluid Handling Cart. Please retain this owner s manual for future reference

More information

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint

CONNECTION > Super-rapid fittings Series 6000 GENERAL DATA. Fitting with connecting tube. Sprint Super-rapid fittings for plastic tubes Series 6000 Sprint Tube external diameters: 3,, 5, 6, 8, 10, 12, 1, 16 mm Fittings threads: metric (M3, M5, M6, M7), BSP (G1/8, G1/, G3/8, G1/2, G3/), BSPT (R1/8,

More information

Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order

Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order Process Pump /5 Series Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted areas.

More information

HEAVY DUTY KNIFE GATE VALVE

HEAVY DUTY KNIFE GATE VALVE HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new

More information

SIMPLAIR PIPING TOOL. JXT Company

SIMPLAIR PIPING TOOL. JXT Company SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.

More information

GRAPHIC DIVISION. 3D drawings available at

GRAPHIC DIVISION. 3D drawings available at GRAPHIC DIVISION GRAPHIC DIVISION PRODUCT DESCRIPTION PAG..01 TABLES FOR PNEUMATIC PUMPS SELECTION PAG..02 SMALL PNEUMATIC SUCTION PUMPS ART. PA 3 and PA 7 PAG..03 SMALL PNEUMATIC SUCTION PUMPS ART. PA,

More information

FILTER REGULATORS MODEL NO: CAT155 & CAT156 FITTING & MAINTENANCE INSTRUCTIONS PART NO: & ORIGINAL INSTRUCTIONS

FILTER REGULATORS MODEL NO: CAT155 & CAT156 FITTING & MAINTENANCE INSTRUCTIONS PART NO: & ORIGINAL INSTRUCTIONS FILTER REGULATORS MODEL NO: CAT155 & CAT156 PART NO: 3120169 & 3120170 FITTING & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0117 INTRODUCTION Thank you for purchasing this CLARKE Filter/Regulator.

More information

Pneumatic spool valve islands

Pneumatic spool valve islands Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their

More information

P/N: IND-DP Industrial Drum Pumps

P/N: IND-DP Industrial Drum Pumps P/N: IND-DP-0613 Industrial Drum Pumps Multi-Certified Industrial SAFETY Solutions SAFETY: As a leading pump manufacturer, Standard is known for our commitment to product quality and SAFETY serving the

More information

Desiccant Air Breathers DBE. Section 3: TNK SCHROEDER INDUSTRIES ACCESSORIES 21

Desiccant Air Breathers DBE. Section 3: TNK SCHROEDER INDUSTRIES ACCESSORIES 21 Desiccant Air Breathers DBE Section 3: SCHROEDER INDUSTRIES ACCESSORIES 21 Reservoir Accessories A hydraulic systems reservoir can play a significant role in the ingression of contamination into the system.

More information

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC

DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC DENISON HYDRAULICS vane pumps - single, double T6G - T67G - T6ZC Publ. 1 - EN0709 - A 01 / 2000 / 2500 / FB Replaces : 1 - EN 084 - B L25-10709 - 1 CONTENTS GENERAL CHARACTERISTICS T67GB T6GC - T6ZC T67GB

More information

Hi-Force Limited Prospect Way Daventry Northants NN11 8PL United Kingdom Tel: +44(0) : Fax: +44(0) : Website:

Hi-Force Limited Prospect Way Daventry Northants NN11 8PL United Kingdom Tel: +44(0) : Fax: +44(0) : Website: 1.0 Inspection of the product upon receipt: On receipt of the product, visually inspect the item for any evidence of shipping damage. Please note shipping damage is not covered by warranty. If shipping

More information

SIHI LPH-X - Liquid Ring Compressors

SIHI LPH-X - Liquid Ring Compressors - Liquid Ring Compressors LPH 50523 LPH 60527 Pressure range: Suction volume range: 0.2 to 1.5 bar 260 to 780 m³/h CONSTRUCTION Sterling SIHI liquid ring compressors are displacement compressors with a

More information

Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order. Option. Symbol.

Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) How to Order. Option. Symbol. Process Pump Automatically Operated Type (Internal Switching Type) Air Operated Type (External Switching Type) Series PAF3 Female threaded PAF31 3 3 Note 1) Actuation Actuation Automatically operated Note

More information

GENO -Flushing Compressor Product Data Sheet F 02

GENO -Flushing Compressor Product Data Sheet F 02 GENO -flushing compressor 1988 K Fig. 1: GENO -flushing compressor 1988 K Designated application is suitable for the following fields of application: Flushing of pipes with water/air mix prior to the start-up

More information

BUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-

BUTTERFLY VALVES. Toll Free (877) - ICFLUID  -2- BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut

More information

TECHNICAL DATA. Q= Cv S

TECHNICAL DATA. Q= Cv S Page 1 of 13 1. DESCRIPTION The Viking 4 inch Model G-4000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry

More information

Self-priming makes priming unnecessary Exhausts the air inside the suction pipe to suck up liquid. Air operated type.

Self-priming makes priming unnecessary Exhausts the air inside the suction pipe to suck up liquid. Air operated type. Process Pump Series 3/5 Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted

More information

AIR-OPERATED DOUBLE DIAPHRAGM PUMP USER S MANUAL

AIR-OPERATED DOUBLE DIAPHRAGM PUMP USER S MANUAL 00, 0, 000 00, 000, 00 A. TECHNICAL INFORMATION Model 00 Inlet/Outlet " Air Inlet /" 0 / 000 /" /" 00 /" /" 000 /" /" 00 /" /" Flow Rate GPM/ 0LPM GPM/ 0LPM GPM/ LPM GPM/ LPM GPM/ 0LPM GPM/ 0LPM Maximum

More information

Low-pressure diaphragm pumps for product feeding Feeding

Low-pressure diaphragm pumps for product feeding Feeding s for product feeding Feeding Low pressure diaphragm pumps The ZIP and UNICA pneumatic double diaphragm pumps were designed specifically for reduced air consumption coupled with better performance and

More information

WALL MOUNTED EMERGENCY EYE & EYE/FACE WASH HAND OPERATED

WALL MOUNTED EMERGENCY EYE & EYE/FACE WASH HAND OPERATED WALL MOUNTED EMERGENCY EYE & EYE/FACE WASH HAND OPERATED Installation, Operating & Maintenance Instructions EEE120 EFE300 I00097_Oct 17 NOTE: THIS DOCUMENT IS TO BE LEFT ONSITE WITH FACILITY MANAGER AFTER

More information

SATURNSERIES INTERCHANGE > ISO (for the couplings)

SATURNSERIES INTERCHANGE > ISO (for the couplings) Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push

More information

Pressure Dump Valve Service Kit for Series 2300 Units

Pressure Dump Valve Service Kit for Series 2300 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit

More information

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves. Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing

More information

INSTALLATION & MAINTENANCE INSTRUCTIONS - ORIGINAL VERSION AVK KNIFE GATE VALVES

INSTALLATION & MAINTENANCE INSTRUCTIONS - ORIGINAL VERSION AVK KNIFE GATE VALVES 1. INTRODUCTION The AVK knife gate valve is a unique, patented, bi-directional on-off valve that ensures a bubble-tight shut off. The valve is available with body of ductile iron and seat of nitrile, viton,

More information

Coding of banjo flow controllers. Actuation M = Manual S = Screwdriver

Coding of banjo flow controllers. Actuation M = Manual S = Screwdriver Flow control valves Unidirectional and bidirectional (meter-in, meter-out, orifice) banjo flow controllers Series SCU, MCU, SVU, MVU, SCO, MCO Ports M5, 1/8, 1/4, 3/8, 1/2 BSPP (without adapters) General

More information

PLD 03 T A CASAPPA S.p.A.

PLD 03 T A CASAPPA S.p.A. GEAR FLOW DIVIDERS INDEX Section Page GENERAL FEATURES... 3 GENERAL DATA... 5 FLOW EQUALIZER... 6 FLOW DIVIDERS... 8 TYPICAL CIRCUITS... 10 NOTES ABOUT COMPOSITION... 12 PORTS DIMENSIONS.... 14 GROUP DIMENSIONS...

More information

Operating Instructions Models and Hydrostatic Test Pumps

Operating Instructions Models and Hydrostatic Test Pumps Operating Instructions Models 46453 and 464530 Hydrostatic Test Pumps 46453 DIMENSIONS: 27 (67.5cm) L x 22 (55cm) W x 34 (85cm) H WEIGHT: 160 lbs. 73 kg PUMP: Twin piston: Positive displacement type Inlet

More information

TWO POST RAM PACKAGE 55 GALLON

TWO POST RAM PACKAGE 55 GALLON OPERATOR S MANUAL TP1265S5XXXXXXXX INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE. INCLUDE MANUALS: AF1265SXXXXXX Extrusion Pump (97999-1528), RM552X-XXX-XX Two Post Lift / Ram (pn 97999-1445), & S-636

More information

Compact Transfer Pump

Compact Transfer Pump Munster Simms Engineering, better known under the product brand name Whale, is an independent company engaged in the design, manufacture, marketing and selling of pumps, valves, faucets and plumbing (water

More information

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Proportional Pressure-Relief Cartridge Valve, Size 2...4 Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting

More information

directional control valve series cv691

directional control valve series cv691 directional control valve series cv691 Contents Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 9 Page 10 Page 11-12 General Information Technical Data Performance Curves Dimensions Relief Valve Advantages

More information

Unit 24: Applications of Pneumatics and Hydraulics

Unit 24: Applications of Pneumatics and Hydraulics Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 9 ACCUMULATORS The material needed for outcome 2 is very extensive so there are

More information

SECTION 11 VACUUM GRIPPER

SECTION 11 VACUUM GRIPPER VACUUM GRIPPERS SECTION VACUUM GRIPPER EDCO USA. www.edcousa.net : CONTENTS GENERAL INFORMATION ER L-Series Coaxial Venturi Technology : Centralized Systems : Operating Pressure : Discrete Systems :4 Rugged

More information

OPERATING INSTRUCTIONS MANUAL FOR QACV PNEUMATIC DOSING PUMP

OPERATING INSTRUCTIONS MANUAL FOR QACV PNEUMATIC DOSING PUMP This operating instructions contains safety information that if ignored can endanger life or result in serious injury. They are indicated by this icon. Use of this pump with radioactive chemicals is forbidden!

More information

InnovDos Foam proportioning system

InnovDos Foam proportioning system InnovDos Lorrie 9 NL - 1724 BL Oudkarspel T: +31 88 9112 112 F: +31 88 9112 119 info@innovfoam.com www.innovfoam.com 1 1. General Information System Composition The InnovDos is made up of two main components

More information

Operating Procedure TITON SUBSEA BOLT TENSIONER

Operating Procedure TITON SUBSEA BOLT TENSIONER Operating Procedure TITON SUBSEA BOLT TENSIONER B & A Hydraulics Ltd Block 1, Units 1 & 2 Souter Head Industrial Centre Souter Head Road Altens Aberdeen Phone: 01224 898955 Fax: 01224 898787 E-Mail: TITON@bahyd.co.uk

More information

Liquid Level Controllers

Liquid Level Controllers Liquid Level Controllers ALL PUMPS LLC-2Y For both pump up and down control. Variable On/Off set points. NDP-15/20/25/32, DP-10/15 & *NDP-40/50/80 LLC-1 Pump up and down versions available. 6 to 12 differential

More information

SAFETY MANUAL FOR FLAMMABLE PRODUCT TRANSFER

SAFETY MANUAL FOR FLAMMABLE PRODUCT TRANSFER SAFETY MANUAL FOR FLAMMABLE PRODUCT TRANSFER SUPPLIMENT TO eom IMPORTANT READ THIS MANUAL BEFORE PRODUCT INSTALLATION, OPERATION, INSPECTION & MAINTENANCE Tougher and more rigid guidelines are being established

More information

Hydraulic hand test pump Models CPP700-H and CPP1000-H

Hydraulic hand test pump Models CPP700-H and CPP1000-H Calibration technology Hydraulic hand test pump Models CPP700-H and CPP1000-H WIKA data sheet CT 91.07 for further approvals see page 2 Applications Simple test pressure generation on site, in the laboratory

More information

FIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to:

FIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to: LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: Rated Static Burst to: psi kpa bar psi kpa bar Flow Range to: gpm lpm Features STYLE C STYLE D STYLE E in-tank filters are

More information

InnoVfoam B.V. InnovDos Foam Proportioning System

InnoVfoam B.V. InnovDos Foam Proportioning System 1724 BL Oudkarspel F. +31 (0)88 9112 119 info@innovfoam.com 1 1. GENERAL INFORMATION SYSTEM COMPOSITION The InnovDos system is made up of two main components (see flow schedule on page 4) that can be integrated

More information

Gas Pressure Regulator HON 502

Gas Pressure Regulator HON 502 Gas Pressure Regulator HON 502 Product information serving the gas industry worldwide Gas Pressure regulator HON 502 Application, Characteristics, Technical Data Application for offtake stations in gas

More information

Inverse Prop. Pressure-Relief Cart., Size 2 4

Inverse Prop. Pressure-Relief Cart., Size 2 4 Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in

More information

Hydraulic Reliability & Preventive Maintenance Report

Hydraulic Reliability & Preventive Maintenance Report Hydraulic Reliability & Preventive Maintenance Report The following is a report of the test, procedures and recommendations for the in-plant press. This information was recorded on May 10 th and 11 th,

More information

Atlas Copco Tools & Assembly Systems. Air Line Accessories Optimizers- FRL

Atlas Copco Tools & Assembly Systems. Air Line Accessories Optimizers- FRL Atlas Copco Tools & Assembly Systems Air Line Accessories Optimizers- FRL MIDI Optimizer FRL Why use an Atlas Copco FRL? Atlas Copco filters, regulators, and lubricators are designed to help you get maximum

More information

OPERATOR S MANUAL

OPERATOR S MANUAL OPERATOR S MANUAL 1604619 INCLUDING: OPERATION, INSTALLATION & MAINTENANCE RELEASED: 11-1-13 REVISED: 3-03-14 (REV. B) 1/4" DIAPHRAGM PUMP 1:1 RATIO (NON-METALLIC) 1604628 READ THIS MANUAL CAREFULLY BEFORE

More information

Standard Operating and Maintenance Instructions for Pumping System Model PS-150

Standard Operating and Maintenance Instructions for Pumping System Model PS-150 Standard Operating and Maintenance Instructions for Pumping System Model PS-150 High Pressure Equipment Company, LLC 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075

More information