WIDETECH MANUFACTURING SDN BHD (472544W)

Transcription

1 1. IDENTIFICATION OF THE SUBSTANCE/ MIXTURE AND OF THE COMPANY 1.1 Product identifier: Product name Product code : Correction Tape Roller: , , , , Relevant identified uses of the mixture and uses advises against: Relevant identified uses Use of the substance/ mixture : Correction tape/ coating Uses advised against : No additional information available 1.3 Details of the supplier of the safety data sheet Manufacturer / Supplier: ACCO Brands Australia 2 Coronation Avenue Kings Park, NSW 2148 Telephone No: Poisons Information: Emergency Telephone No Monday to Friday, 9am to 5pm for general information only 2. HAZARD IDENTIFICATION: 2.1 Classification according of the substance of mixture Classification according to Regulation (EC) No 1272/2008) : Adverse Physiochemical, human health and environment effects : No additional information available 2.2 Label elements Labelling according to Regulation (EC) No.1272/200/ (CLP) : No labelling applicable 2.3 Other hazards : No additional information available 3. COMPOSITION / INFORMATION ON INGREDIENTS Ink Name CAS No % Classification according to Regulation Titanium dioxide Magnesite Silica SiO2 Other coloring material Resin Additive (EC) No. 1272/ 2008[CLP] Page 1 of 6

2 Other Name CAS No % Classification according to Regulation (EC) No. 1272/ 2008[CLP] Polyethyleneterephthalate film 4. FIRST AID MEASURES 4.1 Description of first aid measures Firstaid measures after inhalation Firstaid measures after skin contact Firstaid measures after eye contact Firstaid measures after ingestion : No special measures required : Wash away ink on skin. : Wash with water and consult a doctor promptly. : Rinse the mouth with water and consult a doctor. 4.2 Most important symptoms and effects, both acute and delayed: No further information available. 4.3 Indication of any immediate medical attention and special treatment needed: No further information available. 5. FIRE FIGHTING MEASURES & EMERGENCY ACTIONS 5.1 Extinguishing Media Suitable extinguisher media Unsuitable extinguisher media : Water mist, foam, dry powder, Co2 gas, others : Not applicable 5.2 Special hazards arising from the substance/ mixture: No further information available. 5.3 Advice for firefighter : No special measures required. 6. ACCIDENTAL RELEASE MEASURES 6.1 Personal precautions, protective equipment and emergency procedures: Consult the safety measures listed under Section 7 and Environmental precautions : Do not pour into drain or waterways. 6.3 Methods and material for containment and cleaning up: For containment : Not applicable Methods for cleaning up : If inadvertently released, rewind ribbon 6.4 Reference to other sections See Section 8 for further information on protective clothing and equipment and Section 13 for advice on waste disposal. Page 2 of 6

3 7. HANDLING AND STORAGE 7.1 Precaution for safe handling Precaution for safe handling Hygiene measures : No special measures required. : No special measures required. 7.2 Condition for safe storage, including any incompatibilities Store in dark and cool place 7.3 Specific end use 8. EXPOSURE CONTROLS / PERSONAL PROTECTION 8.1 Control parameters Titanium dioxide(cas No ) United Kingdom WEL TWA (mg/m³) 10 mg/m³(inhalable aerosol) United Kingdom WEL TWA (mg/m³) 4mg/m³(respirable aerosol) USAOHSA WEL TWA (mg/m³) 15 mg/m³(total dust) Magnesite(CAS No ) United Kingdom WEL TWA (mg/m³) 10 mg/m³(inhalable aerosol) United Kingdom WEL TWA (mg/m³) 4mg/m³(respirable aerosol) USAOHSA WEL TWA (mg/m³) 15 mg/m³(total dust) USAOHSA WEL TWA (mg/m³) 4mg/m³(respirable aerosol) Silica SiO2(CAS No ) United Kingdom WEL TWA (mg/m³) 6 mg/m³(inhalable aerosol) United Kingdom WEL TWA (mg/m³) 2.4mg/m³(respirable aerosol) USAOHSA WEL TWA (mg/m³) 80 mg/m³(total dust) 8.2 Exposure controls Appropriate engineering controls Hand protection Eye protection Skin and body protection Respiratory protection Environmental exposure controls Other information : Not applicable : Wear protective gloves when required. 9. PHYSICAL AND CHEMICAL PROPERTIES 9.1 Information on basic physical and chemical properties Physical State : Polyethyleneterepthalate film coated on one side there of with white ink Colour : White Odour Odour threshold ph Melting point/ range Boiling point/ range Page 3 of 6

4 Flash point Auto ignition temperature Decomposition temperature Selfflammability Vapour pressure Relative vapour density at 20 C Relative density Solubility with water Log Pow Viscosity, Kinematic Viscosity, Dynamic Explosives properties Oxidising properties Explosive limits : > 150 o C : Product is not selfigniting : Insoluble 9.2 Other information 10. STABILITY AND REACTIVITY 10.1 Reactivity : No hazard to be specially known 10.2 Chemical stability : Stable under recommended storage and handling condition 10.3 Possibility of hazard reactions : No dangerous reactions known Conditions to be avoided : High temperature, high humidity, direct sunlight 10.5 Incompatible materials 10.6 Hazardous decomposition products: 11. TOXICOLOGICAL INFORMATION 11.1 Information on toxicological effects Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicitylable Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Page 4 of 6

5 12. ECOLOGICAL INFORMATION 12.1 Toxicity Ecology general 12.2 Persistent and degradability 12.3 Bioaccumulation potential 12.4 Mobility in soil 12.5 Results of PBT and vpvb assessment 12.6 Other adverse effects: 13. DISPOSAL CONSIDERATION 13.1 Waste treatment methods Waste disposal recommendation : Dispose of as accordance with relevant local regulations. 14. TRANSPORT INFORMATION 14.1 UN number : Not applicable 14.2 UN proper shipping name : Not applicable 14.3 Transport hazard class(es) : Not applicable 14.4 Packing group : Not applicable 14.5 Environmental hazards : Not applicable 14.6 Special precautions for user : Not applicable 14.7 Transport in bulk according to Annex : Not applicable II of Marpol and the IBC Code 15. REGULATORY INFORMATION 15.1 Safety, health and environmental regulations/ legislation specific for substance or mixture EURegulations : No REACH substances with ANNEX XVII restrictions : Contains no REACH candidate substance National regulations 15.2 Chemical safety assessment No chemical safety assessment has been carried out Page 5 of 6

6 16. OTHER INFORMATION The product should not be used for purposes other than those shown in Section 1 without first referring to the supplier in obtaining written handling instructions. As the specific conditions of use for the product are outside the supplier's control, the user is responsible to ensure that the requirements of the relevant legislation are complied with The information contained in these safety data sheet is based on the present state of knowledge and current national legislation. It provides guidance on health, safety and environmental aspects of the product and should not be construed as any guarantee of technical performance or suitability for particular applications. Page 6 of 6