INFLATABLE RESCUE RAFT 4 MANUAL

Size: px

Start display at page:

Download "INFLATABLE RESCUE RAFT 4 MANUAL"

Kellie Harrison
6 years ago
Views:

1 INFLATABLE RESCUE RAFT 4 MANUAL

2 NORTHERN DIVER INFLATABLE RR4 MANUAL Thank you for purchasing this Northern Diver Inflatable. To help ensure your future safety, do not use this product before reading this manual. It is important to fully understand its proper handling for safe usage. Copyright notice: This owners manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-readable form without prior consent in writing from Northern Diver (International) Ltd. For the latest information about all Northern Diver Specialist Rescue Equipment please visit OPERATING INSTRUCTIONS Inflating the Rescue Raft 1. Remove the rescue raft from the bag/valise provided. It isn t necessary to unroll the RR4 for inflation. 2. The inflation valve has two positions. When the valve is closed, the diaphragm pin will be in the raised position. To open the valve, press and twist the diaphragm pin clockwise. When closing the valve, twist the diaphragm pin anticlockwise until it releases into the raised position. 3. Please ensure the inflation valves are in the closed position before inflating, see diagram below: INFLATE POSITION (UP/OUTWARD) VALVE CLOSED DEFLATE POSITION (DOWN/INWARD) VALVE OPEN PUSH IN & TURN INFLATE DEFLATE 4. Insert the inflation hose into the inlet valve on the main section (the floor) and twist clockwise to lock it into place. You can then begin to inflate. When using a BA cylinder to do so, this will take less than 60 seconds. Take care not fill to maximum capacity. When the first section is inflated, remove the hose by twisting anticlockwise. Northern Diver Inflatables Manual East Quarry Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK

5. The inflation process can then be repeated on each part of the inflatable.

Please take care not to fill to maximum capacity. 6. Top up the two side buoyancy tubes (sponsons) by using the manual inflation pump provided with each RR4. 7.

Open all valves by pressing and twisting the diaphragm pin clockwise. 3. Turn the RR4 upside down, and ensure that the floor is facing upwards.

Once folded/rolled, we recommend that the inflation valves are closed and the valve caps are in place. The will prevent dust/debris entering into the valves. 5.

3 5. The inflation process can then be repeated on each part of the inflatable. To save time, you can use multiple hoses to inflate two sections simultaneously (additional hoses are available to purchase from your Northern Diver dealer). Please take care not to fill to maximum capacity. 6. Top up the two side buoyancy tubes (sponsons) by using the manual inflation pump provided with each RR4. 7. Then fit the valve caps by inserting them and twisting clockwise. 8. Repeat the top up process for the main section (floor). Deflating the Walkway 1. Remove the inflation valve caps. 2. Open all valves by pressing and twisting the diaphragm pin clockwise. 3. Turn the RR4 upside down, and ensure that the floor is facing upwards. Begin to fold, starting at the opposite end to the inflation valves. While folding you will release any excess air from the main section and floor. 4. Once folded/rolled, we recommend that the inflation valves are closed and the valve caps are in place. The will prevent dust/debris entering into the valves. 5. For an additional cost of $100.00, Northern Diver can supply our mains powered Speedy Air Pump, which can rapidly inflate or deflate the Walkway. MAINS POWER SPEEDY AIR PUMP MAX SERIES Our high-pressure inflator pumps are dual action and designed to blow up inflatables with no effort at all. The pump will inflate your equipment to its correct pressure and stop automatically. BOAT-PUMP AC Contact Northern Diver +44 (0)

each use. Every six months, a visual inspection is recommended. This can be carried out in-house by your maintenance department/workshop. Inflate the RR4 as per a normal deployment.

4 Check out our full product range online. Product review s, our full product range along with instructions and manuals are all also available at MAINTENANCE / SERVICING We recommend that the walkway is rinsed with fresh clean water after each use. Every six months, a visual inspection is recommended. This can be carried out in-house by your maintenance department/workshop. Inflate the RR4 as per a normal deployment. Leaks can be detected by dousing the with soapy water. If a leak is present, bubbles will appear constantly on the affected area. If a leak is located around a seam or valve, Northern Diver will carry out any necessary repairs under warranty. Additional leaks can be repaired by Northern Diver, costing $15.00 per leak. Self adhesive repair patches can be purchased and cost $7.00 per pack. Each pack contains 3 x 50mm discs and 3 x 100mm disc patches. This will enable you to repair any leaks/punctures in-house. If the inflation or over-pressure valves are accidentally damaged, there will be a $30.00 charge to replace either valve. Every 12 months, an annual service is required. REPAIR PATCHES FOR INFLATABLES Temporarily repair inflatables quickly with no tools required. Repair patches can be applied in the rain or underwater. Works on all types of inflatable products including boats, rafts, life jackets, PVC, neoprene and nylon fabrics. CLEANING INFLATABLE-REPAIR-PATCHES Rinse the RR4 and valves with clean water to remove any debris like sharp stones, dirt or sand and leave to dry. If cleaning immediately after use is not possible, stow in the bag/ valise temporarily after checking for stones and clean within twenty-four hours. Household detergent mixed with warm water can be used with a scrubbing brush for any difficult patches of mud or oily deposits. Northern Diver Inflatables Manual East Quarry Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK

5 Inflatable Details Please note your inflatable details for future reference. Serial number Date of purchase Colour(s) Servicing Details Service date Service station Comments Contact Northern Diver +44 (0)

6 Find Us Online. View our extensive product range Tel: +44 (0) East Quarry, Appley Lane North, Appley Bridge, Wigan, Lancashire, WN6 9AE, UK

NORTHERN DIVER PFD MANUAL

PFD MANUAL NORTHERN DIVER PFD MANUAL Thank you for purchasing this Northern Diver PFD. To help ensure your future safety, do not use this product before reading this manual. It is important to fully understand