Contrans P HART Transmitter

Size: px
Start display at page:

Download "Contrans P HART Transmitter"

Transcription

1 Contrans P HART Transitter ASD 800 / 810 with Reote Seal for Gauge / Absolute Pressure and Level Span: 60 to 600 (16 abs) (6 kpa to 60,000 kpa) (6 kpa to 1,600 kpa abs) 10/ (624.bp) n Isolation between Process and Transitter with Measuring Media having: High Teperatures and Viscosities Corrosive Ingredients, a Tendency to Polyerization n Prevention of Deposits in the Process Connection Flanges by Extended Reote Seals n Mounting to various DIN or ANSI Flanges n Microprocessor technology n HighTurn down ratio 30 : 1 n Digital counication using the "HART"-Protocol without disturbing the output signal A n Lower range value, span and daping are externally adjustable n Transfer response configurable: linear freely prograable PID-controller n "Intrinsic Safety" or "Flaeproof Enclosure" explosion protection or ounting on "Zone 0" n E.M.C. according to IEC 801 The transitter ASD 800 / 810 cobines proven, ature technology with a trend-setting icroprocessor controlled electronic. It is based on a proven, highly-stable easuring sensor, on which a reote seal is fitted. The pressure present is transferred via the diaphrag and the filling liquid to the internal sensing diaphrag in the easuring sensor and converted into an electrical signal by the electronics. The reote seals, which depending on type, are either connected directly to the transitter or via a flexible capillary tube. The length of the capillary tube is deterined by the location and ounting position. Apart fro the high accuracy, with an alost coplete copensation of abient influences, both easuring sensor and electronic provide a substantial increase in functionality. The digital indicator can be so configured that the easured value is shown as a physical unit, percentage value or current. In addition the easuring sensor teperature can be indicated. The process wetted parts of the reote seal can be selected fro various aterials, i.e. Stainless Steel, Hastelloy C or Tantalu, depending upon the required resistance to corrosion. Various filling liquids, for exaple for the food and beverage industry, coplete the spectru of applications. The Transitter ASD 800 / 810 with reote seal is thus an efficient, intelligent eleent, a ust for every type of autoation.

2 Transitter ASD 800 / ASD 810 with Attached Reote Seal Technical Data Measuring Mechanis Measuring liits ASD 800: -100% ($ -1 ) and +100% of the ax. span ASD 810: 0% and +100% of the ax. span Lower range value Continuously adjustable between the easuring liits Span The in. and ax. span is depending of the Reote Seal Type and the Noinal Pressure. Span values see Table 1 on side 4. The span is continuously adjustable. Characteristic C Linear, rising or falling C Freely prograable Over-ranging liit Order No. V15956AE or V15957AE: ranges # 400 : 10 range 2.5 : 25 range 16 : 32 Order No. V15936AE: ranges : 2 ties the range end value range 600 : 900 Materials of Process Wetted Parts see Ordering Data Materials of non Process Wetted Parts! Capillary tube: Stainless Steel! Protective tube: Stainless Steel or with PVC covering! Flange: Stainless Steel Power Supply Transitter operating voltage U B,ax DC 45 V U B,in DC 11.5 V Output signal A Output signal liits I in 3.5 A, I ax 22.5 A Standard adjustent: I in 3.8 A and I ax 20.5 A Load R # & S ' ' Digital Counication Standardized counication protocol "HART" 5.1 Miniu load for counication: 250 S Recoended lead-length for counication:! screened ulti-wire: ax. 1.5 k! screened two-wire: ax. 3 k Max. perissible voltage ripple of the power supply during counication:! 7 V pp at 50 Hz # f # 100 Hz! 1 V at 100 Hz < f # 200 Hz pp! 0.2 V pp at 200 Hz < f # 300 Hz The following can, for exaple, be configured:! Digital indication of process pressure, teperature, percentage value, current, arbitrary process variables! Daping! Transfer function! Alar signalling I in / Iax! PID Controller; adjustent with five paraeters C Setpoint w C Proportional gain K p C Reset tie Tn C Derivative gain K D C Derivative action tie T D Write-over of paraeters can be prevented by interlocking writeover protection. All stored data is secured even in the event of power supply failure. A detailed description of all functions can be found in the Instructions 42/ EN. General and Safety Data Abient Conditions Storage and transport teperature range -50EC...+80EC Transitter Abient teperature inial: dependent of the filling liquid, axial: +80 Mediu teperature at reote seal Directly connected: Abient teperature # 40: ax Abient teperature +60: ax inial ediu teperature dependent on the filling liquid (see Table 2, page 4) Reote seal with Running Union and Buna O-ring axial +120 with Capillary tube: dependent on the filling liquid (see Table 2, page 4) with the following restrictions:! Flush diaphrag DN25 / DN 1": axial +250! Flush diaphrag, Mat l: tantalu: axial +220! In-line reote seal DN 25 / DN 1": axial +250 Huidity #95%, annual ean, condensation perissible Aplifier Enclosure, Weight Material Die cast copperfree aluiniu (GD-AlSi) / polycarbonate Protective varnish Epoxy resin, gravel-grey, RAL 7032 Degree of Protection IP 65 (jet waterproof) according to EN (/ NEMA standard type 4) Weight! Flange Reote Seals with Flush diaphrag / Extended diaphrag DN 50 / 2", DN 80 / 3": - DN 50, PN 16/40 with Flush diaphrag: approx. 3.3kg - DN 2", Class 300 with Flush diaphrag: approx. 3.7kg - DN 50, PN 16/40 with Extended diaphrag 100: approx. 4.0kg - DN 2", Class 300 with Extended diaphrag 100: approx. 5.4kg - DN 80, PN 16/40 with Flush diaphrag: approx. 5.8kg - DN 3", Class 150 with Flush diaphrag: approx. 5.3kg - DN 80, PN 16/40 with Extended diaphrag 100: approx. 7.5kg - DN 3", Class 150 with Extended diaphrag 100: approx. 7.0kg! Flush Diaphrag Reote Seals DN 25 / DN 1", Miniature Reote Seals, In-line Reote Seals and Fast Coupled Reote Seals: see Diensional Diagras. In addition to the quoted weights, the weight of the transitter, approx. 1.4 kg and the weight of the capillary tube, if fitted at approx kg /, ust be added. Mounting Mounting Instructions! Reote Seal with Capillary Tube: The axiun difference in height between the reote seal and the transitter when ounting the reote seal below the transitter is: with silicone oil (IC) 5 with carbon fluoride (L)2.5 with high teperature oil (IH)5 with vegetable oil (PF)2.5 With an operating pressure < 1000 abs, the transitter ust be ounted below the reote seal. The iniu bending radius of the capillary tube is 75 ; do not kink! Page 2 of

3 Transitter ASD 800 / ASD 810 with Attached Reote Seal Technical Data Mounting! Flange Reote Seal with Flush / Extended diaphrag The reote seal is ounted at the connecting flange on site. Only gaskets of soft aterials to be used with reote seals having diaphrags and sealing surfaces ade of tantalu (Gasket not supplied).! In-line Reote Seal The reote seal is ounted direct in the process piping between two flanges.! Reote Seal with Fast Coupling The reote seal is ounted directly onto the process via either a Running union or a clap connection.! Miniature Reote Seal The threaded reote seal is screwed with the available threaded process connector.! Transitter The transitter is wall or pipe ounted or by an instruent support fitting according to DIN , when the transitter is connected to the reote seal with a flexible capillary tube. When the transitter is directly connected to the reote seal then no suppleentary ountings or supports are necessary. Diensions see Diensional Diagras. Transient Response (at reference conditions) (see Instruction 42/ EN for further data) All values are liit values and refers to the output span. The effects identified with a are with reference to the easuring range and are to be ultiplied by the turn-down factor. The ratio range/calibrated span should be as sall as possible. However the liit values and response ties are dependent upon the reote seal and the easuring point. Data for the instruent cobination are first possible after knowledge of all the data subitted in the questionnaire 80/ EN (see pages 13 and 14). Data for transitter (without effect fro the reote seal): Confority including hysteresis and dead band, terinal-based 0.1 % Hysteresis 0.05 % Power supply Voltage effect per Volt % The following specifications are valid for a linear transfer function. The effect appearing at the output with non linear transfer functions is dependent on the function and is to be calculated accordingly. Abient teperature effect according to DIN Theral change (-20EC...+60EC) on zero 0.1 % on span 0.1 % Teperature coefficient ( ) 2) on zero 0.05 %/10K on span 0.05 %/10K Long-ter drift within 6 onths 0.05 % Rise tie according to DIN dependent on range and turn-down factor s additional adjustable tie constant s Explosion Protection M for Zone 0" Type Approval (Gerany only) according to VbF (Geran Regulations for Flaable Liquids) "Zone 0" Instruent Construction (Gerany only) The instruent cobination consists of 1 reote seal and the associated transitter. The reote seal is installed on the "Zone 0" easuring point. The transitter ust be designed in the "Intrinsic Safety EEx i" or Flaeproof Enclosure EEx d Type of Protection. M for Zone 1" When the transitter is installed in "Zone 1", the type of protection "Intrinsic Safety EEx i" is sufficient. PTB-No. Ex-93.C.4004 (ASD 800/810) Explosion protection Intrinsic Safety "i" Identification Code (DIN EN ): EEx ia IIC T6 Type Approval Certificate: PTB No. Ex-93.C.4004, copy can be obtained under No. 49/15-34 EX. Connected to an intrinsically safe current circuit with the following ax. values: Teperature class U ax I ax P ax Max. abient teperature T6 45 V 130 A 0.5 W 40 EC T5 45 V 130 A 0.8 W 40 EC T4 45 V 130 A 1.0 W 80 EC T4 45 V 130 A 1.2 W 60 EC internal capacitance C # µf eq internal inductance is negligably sall Explosion protection Flaeproof Enclosure "d" (Only with Order No. V15936AE...) Identification Code (DIN EN ): EEx d IIC T6 Type Approval Certificate: PTB No. Ex-91.C.1077 Operating conditions: ax. abient teperature 75EC Test Certificat can be obtained under No. 49/15-33 EX. M for Zone 2" BASEEFA Type N Approval (BS 694 Ex N IIC T5 (T : -40 up to +80 ) ab Additionally with turn-down factor >1:10 & 2) With carbon fluoride filling liquid (only Order No. V15936AE...) -20EC...+80EC Page 3 of 20

4 + Transitter ASD 800 / ASD 810 with Attached Reote Seal Technical Data Table 1: Type of Construction, Spans and Lengths of Capillary tube with Fast Coupling Reote Seal Type Noinal Diaeter Spans in / ax ax. Length of Capillary Tube Flush Diaphrag DN 50 / DN 2" 100 / Extended Diaphrag In-Line Reote Seal DN 25 / DN 1" 1.6 / DN 80 / DN 3" 60 / DN 50 / DN 2" 160 / DN 80 / DN 3" 60 / DN 25 / DN 1" 4 / DN 40 / DN 1 1/2" 2.5 / DN 50 / DN 2" 2.5 / DN 80 / DN 3" 2.5 / Running Union DN / acc. to DIN Clap-connection DN 2" 6 / G 1 A 6 / Miniature Reote Seal G 1 1/2 A 1.2 / With ASD 810 use 400 abs. range. When selecting transitter range please take noinal pressure (PN) of Reote seal into consideration! Table 2: Application Liits: perissible Teperature / Miniu Operating Pressure Attention:! The pressure has to be linearly interpolated between the stated teperatures.! Flush diaphrag reote seals with tantalu diaphrag (Code-No. P02, P05, P08, P11, P14, P17, P20, P23 ) should not be used with operating teperature > 220EC. Filling liquid Silicone Oil Carbon Fuoride High-teperature Vegetable Oil Vacuuproof Oil Design Identification IC L IH PF IC 3 Density at 20 in kg/ Operating Teperature in Pressure rating in abs. at 20 > 500 > 1000 > 500 > 500 > > 500 > 1000 > 500 > 1000 > > 500 > 1000 > 500 > 1000 > > > 750 > 1000 > > 1000 > 1000 > > Electrical Connections Functional Diagra-Counication Cable gland or feale thread (standard) One Han 8U plug (option) ~79 Contrans P p + # AS UB US I A+ FSK Power supply TEST FSK ode Screw terinals for wires CD0037BE.EPS Plug connection diagra Socket-insert (view on sockets) RS 232C IBIS Page 4 of

5 Transitter ASD 800 / ASD 810 with Attached Reote Seal Ordering Data Order No. DM DM intern Transitter ASD 800 / ASD 810 V159 AE- Measuring range (ASD 800 for Gauge Pressure / Level) MB (6 kpa) 56 10X X (40 kpa) 56 10X X (250 kpa) 56 20X X (1600 kpa) 56 20X X (4000 kpa) 36 20X X (10000 kpa) 36 20X X (25000 kpa) 36 20X X (60000 kpa) 36 10X X30 2) adjusted fro... to... //kpa or in acc. with questionnaire Y04 (data is necessary) Measuring range (ASD 810 for Absolute Pressure) abs. (40 kpa abs.) abs. (250 kpa abs.) abs. (1600 kpa abs.) adjusted fro... to... //kpa abs. or in acc. with question- 2) naire (data is necessary) 57 10X X X X X X78 Vacuu easureent Vacuuproof design (is always necessary with ASD 810 ) 739 Filling liquid (in easuring echanis, only with ASD 800 with Order No. V15936AE...) Silivone oil Carbon fluoride (in. abient teperature -20EC) Output signal A, linear A, Characteristic acc. to table of values, ax. 22 pairs: Input (%); Output (%) 221 Electrical connection One Pg 13.5 cable gland 044 Two Pg 13.5 cable gland Two / 2-14 NPT feale threads 270 One plug connector (Han 8U) 272 The three-digit code nubers are added to the order nuber, separated by diagonal strokes. Further instruent variations on the next page. 2 2 Possible units:,, Pa, kpa, H2 O, Hg, psi, g/c, kg/c, inches H2 O, inches Hg, feet H2O. 2) Copleted questionnaire (pages 12/13) necessary, when connection via capillary tube takes place and reote seal and transitter are not at the sae height. Y MB OR MWF ELA Page 5 of 20

6 Transitter ASD 800 / ASD 810 with Attached Reote Seal Additional Ordering Data for ASD 800 / ASD 810 Instruent Options Code-No. DM DM intern Explosion Protection EX Ex-design: EEx ia IIC T6 557 Eex d IIC T6 only with Order No. V15936AE FM Explosion Proof A and in conjunction with Code-No CSA Intrinsically Safe 561 BASEEFA Type N, Ex N II C T5 274 Indicating instruent Analogue indicating instruent (Scale: % linear): Noral or Ex "i" design 206 Digital indicating instruent (indicates %. However with Code-No. 415: process pressure): Noral- or Ex-design EEx ia 244 Digital indicating instruent (indicates %. However with Code-No. 415: process pressure): Ex-design EEx d 245 Scale indication... (please define value: e.g ; A proportional; only cobi- 416 nable with Code-No. 244/245, not with Code-No. 415) Prograable Paraeter PID-Controller, 415 Paraeter: noinal value in %; K p (0...40); T n in sec. (0, ); K D (0...40); T D in sec. ( ) 2) Alar signalling with 3.6 A (standard: 21 A) 417 Maxial output current (please state value A; Standard: 20.5 A) Minial output current please state value A; Standard: 3.8 A) Electrical Daping TG (state value to be adjusted, s) Tagging on Type plate (axial 32 characters) 205 on Tie-on plate, Mat l stainless steel (axial 32 characters) 202 Mounting bracket Bracket for wall ounting (carbon steel) 141 Bracket and U-bolts for 2" pipe ounting (carbon steel) 142 Bracket for wall ounting (stainless steel) 143 Bracket and U-bolts for 2" pipe ounting (stainless steel) 144 Instructions 3) geran english french The three-digit code nubers are added to the order nuber, separated by diagonal strokes Possible units: pressure units, as listed under "adjusted fro... to... ";, c,, inches, feet,, l, rels, gallons, yard, inches, 3 feet, g, kg, t, pounds, short tons, long tons (further units see Technical Inforation: B 92 M 508 V) 2) To optiise the process it is necessary to have the additional facilities available with IBIS and a ode. When no values stipulated-standard values will be prograed i.e. setpoint 50% and K p 1. T n, K D and T D are switched off (0). 3) One geran copy included in the scope of supply - no specification required. Further operating instructions have to be charged (please indicate nuber of copies). Scope of Supply: Supplied against special order: 1 Instructions Power supply e.g. TZN 128 ( EN), 1 Instruent socket with plug connector Mounting Accessories ( EN), Counication software IBIS ( EN), FSK-Mode for the digital Counication ( EN), Spare Parts Transitter ASD. Z2D Z2E Z2F ANZ MES GA Page 6 of

7 Transitter ASD 800 / ASD 810 with Attached Reote Seal Flush Diaphrag Reote Seal DN 25 / DN 1" (with internal diaphrag) Varianten Code-Nr. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) Mounting to pressure-easuring echanis with capillary tube Materials Diaphrag and sealing surface, Material: stainless steel 316 Ti st.st. (1.457 Sealing ring (only with noinal pressure up to PN 63 or 600 psi) PTFE Flange acc. to DIN 2501, Mat l 316 Ti st.st. (1.457 Noinal Diaeter Pressure rating Sealing Surface DN 25 PN 10/40 For D (DIN 2526) P70 DN 25 PN 10/40 For N (DIN 2512) P71 DN 25 PN 63/100 For D (DIN 2526) 701 DN 25 PN 160 For D (DIN 2526) 702 DN 25 PN 250 For D (DIN 2526) 703 acc. to ANSI B 16.5, Mat l 316 Ti st.st. (1.457 Noinal Diaeter Pressure rating Sealing Surface DN 1" Class 150 psi For RF P72 DN 1" Class 300 psi For RF P73 DN 1" Class 600 psi For RF 706 DN 1" Class 1500 psi For RF 707 ANZ MES Filling liquid Silicon oil Vakuuproof design MWF Lengths of capillary tube (standard lengths) Special lengths between 1 and 6: Basic price of the next longer standard length plus an extra fee 764 Special Features Capillary tube with PVC protective cover 775 FEP DZ0 Ex-Design for Zone 0" (only with Code-Nos. 557 or 558) 689 Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered (Code-No. 739) Page 7 of 20

8 Transitter ASD 800 / ASD 810 with Attached Reote Seal Flush Diaphrag Seal / Extended Diaphrag Seal DN 50 / DN 2" coplete with Flange Options Code-No. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) Mounting to pressure-easuring echanis with capillary tube Noinal Diaeter Sealing Surface Diaphrag / Sealing Surface Material DN 50 For E (DIN 2526) 316 L st.st. (1.4404) P00 Hastelloy C P01 Tantalu P02 For V13 (DIN 2513) 316 L st.st. (1.4404) P03 Hastelloy C P04 Tantalu P05 For N (DIN 2512) 316 L st.st. (1.4404) P06 Hastelloy C P07 Tantalu P08 DN 2" For RF (ANSI B 16.5) 316 L st.st. (1.4404) P09 Hastelloy C P10 Tantalu P11 Pressure rating DN 50 PN 16 / 40 P30 PN 64 P31 PN 100 P32 DN 2" Class 150 psi B P33 only in conjunction with Sealing Surface Class 300 psi C P34 For RF Class 600 psi D P35 Flush diaphrag / Extended diaphrag Reote seal with Flush diaphrag (without Extension) P50 Reote seal with Extension (not cobineable with diaphrag aterial Tantalu ) DN 50 / DN 2" Extension, Mat l 316 L st.st. (1.4404) Extension length 50 P51 Extension length 100 P52 Extension length 150 P53 Extension, Mat l Hastelloy C Extension length 50 P54 Extension length 100 P55 Extension length 150 P56 Filling liquid (data always necessary) Silicone oil Carbon fluoride Vegetable oil (suitable for the use in the food and beverage industry) High-teperature oil (not for directly connection, Code-No. 699) Vacuuproof Design Lengths of capillary tube (standard lengths) Special lengths between 1 and 16: Basic price of the next longer standard length plus an extra fee Special features Diaphrag with FEP-coating 662 (for Mat l 316 L st.st. (1.4404) and Hastelloy C, ediu teperature #150 ) Capillary tube with PVC protective cover 775 Ex-Design for Zone 0" (only with Code-Nos. 557 or 558) 689 Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. For ounting fro Reote seals in Sandwich -construction (additional blank flange required) see EN. 764 ANZ MWF FEPDZ The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered. Page 8 of

9 Transitter ASD 800 / ASD 810 with Attached Reote Seal Flush Diaphrag Seal / Extended Diaphrag Seal DN 80 / DN 3" coplete with Flange Options Code-No. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) Mounting to pressure-easuring echanis with capillary tube Noinal Diaeter Sealing Surface Diaphrag / Sealing Surface Material DN 80 For E (DIN 2526) 316 L st.st. (1.4404) P12 Hastelloy C P13 Tantalu P14 For V13 (DIN 2513) 316 L st.st. (1.4404) P15 Hastelloy C P16 Tantalu P17 For N (DIN 2512) 316 L st.st. (1.4404) P18 Hastelloy C P19 Tantalu P20 DN 3" For RF (ANSI B 16.5) 316 L st.st. (1.4404) P21 Hastelloy C P22 Tantalu P23 Flange / Pressure rating DN 80 PN 16 / 40 P36 PN 64 P37 PN 100 P38 DN 3" Class 150 psi B P39 only in conjunction with Sealing Surface Class 300 psi C P40 For RF Class 600 psi D P41 Flush diaphrag / Extended diaphrag Reote seal with Flush diaphrag (without Extension) P50 Reote seal with Extension (not cobineable with diaphrag aterial Tantalu ) DN 80 / DN 3" Extension, Mat l 316 L st.st. (1.4404) Extension length 50 P57 Extension length 100 P58 Extension length 150 P59 Extension, Mat l Hastelloy C Extension length 50 P60 Extension length 100 P61 Extension length 150 P62 Filling liquid (data always necessary) Silicone oil Carbon fluoride Vegetable oil (suitable for the use in the food and beverage industry) High-teperature oil (not for directly connection, Code-No. 699) Vacuuproof Design Lengths of capillary tube (standard lengths) Special lengths between 1 and 16: Basic price of the next longer standard length plus an extra fee Special features Diaphrag with FEP-coating 662 (for Mat l 316 L st.st. (1.4404) and Hastelloy C, ediu teperature #150 ) Capillary tube with PVC protective cover 775 Ex-Design for Zone 0" (only with Code-Nos. 557 or 558) 689 Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. For ounting fro Reote seals in Sandwich -construction (additional blank flange required) see EN. 764 ANZ MWF FEPDZ The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered Page 9 of 20

10 Transitter ASD 800 / ASD 810 with Attached Reote Seal In-Line Reote Seal DN 25...DN 80 / DN 1"... 3" Options Code-Nr. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) Mounting to pressure-easuring echanis with capillary tube Pressure rating PN 6... PN 400 or Class 150 psi...class 2500 psi Connection acc. to DIN 2501 or ANSI B 16.5 Diaphrag and Sealing surface, Material 316 Ti st.st. (1.457 Noinal diaeter Sealing surface DN 25 / DN 1" For E (DIN 2526) / For RF 740 DN 40 / DN 1 1/2" For E (DIN 2512) / For RF 741 DN 50 / DN 2" For E (DIN 2526) / For RF 742 DN 80 / DN 3" For E (DIN 2526) / For RF 743 Diaphrag and Sealing surface, Material Hastelloy C Noinal diaeter Sealing surface DN 25 / DN 1" For E (DIN 2526) / For RF 744 DN 40 / DN 1 1/2" For E (DIN 2512) / For RF 795 DN 50 / DN 2" For E (DIN 2526) / For RF 749 DN 80 / DN 3" For E (DIN 2526) / For RF 727 Filling liquid Silicone oil Carbon fluoride High teperature oil Vegetable oil Vacuuproof Design Lengths of capillary tube (axial lengths with DN 25 / ANSI 1") (axial lengths with DN 40 / ANSI 1 1/2") (axial lengths with DN 50 / ANSI 2") (axial lengths with DN 80 / ANSI 3") 763 Special lengths between 1 and 16: Basic price of the next longer standard length plus an extra fee 764 Special Features Capillary tube with PVC protective cover 775 FEP DZ0 Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes ANZ MES MWF When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered. Page 10 of

11 Transitter ASD 800 / ASD 810 with Attached Reote Seal Fast Coupled Reote Seals DN 50 / DN 2" Options Code-No. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) 699 Mounting to pressure-easuring echanis with capillary tube with Running Union acc. to DIN Noinal diaeter Pressure rating Process wetted parts DN 50 PN Ti st.st. ( DN 50 PN 25 Hastelloy C 713 with Clap-Connection Noinal diaeter Pressure rating Process wetted parts DN 2" PN Ti st.st. ( DN 2" PN 40 Hastelloy C 726 MES Sealing ring (O-ring) (only in conjunction with running union acc. DIN Buna (tax 120 ) PTFE Filling liquid Silicone oil Carbon fluoride Vegetable oil Vacuuproof Design Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request MWF The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes. When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered. Miniature Reote Seal Options Code-No. DM DM intern Reote Seal Mounting EX Direct ounting (without capillary tube) 699 with Spigot acc. to DIN ) Process connection Pressure rating Process wetted parts G 1 A PN Ti st.st. (1.457 G 1 A PN 600 Hastelloy C G 1 1/2 A PN Ti st.st. (1.457 G 1 1/2 A PN 600 Hastelloy C Filling liquid Silicone oil Carbon fluoride Vegetable oil Vacuuproof Design Other variations regarding Pressure rating, Materials, Sealing surfaces, Filling liquids on request. The three-digit code nubers fro the reote seal are added to the order nuber of the transitter, separated by diagonal strokes MES MWF When ounted on an absolute or gauge pressure transitter for easureent # 500 (abs.), the Vacuuproof design ust be ordered Page 11 of 20

12 Transitter ASD 800 / ASD 810 with Attached Reote Seal Questionnaire 80/ EN (page 1 of 2) Location Measuring instruents with reote seals for easuring gauge pressure, differential pressure, flowrate and level The inforation given in this questionnaire is binding for the technical design of easuring syste. The HARTMANN & BRAUN AG can only guarantee satisfactory easureent results when exact and correct inforation is provided. The questions identfied by will be answered by Hartann & Braun. Copany Custoer nuber: Measuring-point nuber: Level Measureent H&B offer nuber: H&B contract nuber: Position nuber: 1 Mediu to be easured Measuring instruent with one reote seal (see Fig. Measuring instruent with two reote seals (see Fig. 2) Operating data of the ediu to be easured which will be referred to for the calculation and design Teperatures Process pressure Density Density of the gas above the process Process variable (e.g A) Elevation between reote seal and easuring instr. Instruent above the reote seal Instruent below the reote seal Difference in elevation of the two reote seals Tank diensions: Difference in height of levels Diension: fro lower reote seal up to lower level fro lower reote seal up to upper level Capillary tube length + (HP) side (LP) side Additional data Process teperature range Average abient teperature at the easuring instr. Average abient teperature at the capillary tube t a a c b d M + t M t um t uk kg/ 3 0/4...20A) t p e c b d M G fro... to... t M fro... to... t um t uk kg/ 3 3 kg/ 0/4...20A) 8 Data of liits which for exaple can occur with cleaning processes or blowing through (not easuring operation) Teperature Pressure t ax t in pax pin t ax t in pax pin Note: Reote seals with silicone oil (standard) ay be ounted up to a axiu of 5 below the easuring instruent. Measuring instruent Fig. 1 Fig. 2 Reote seal H 2 Measuring H 2 instruent H 1 lower level H 2 upper level a+ 0 a c H 1 H 1 b d Reote seal Tank open to the atosphere Reote seal c b d e Pressuretight closed tank M01281E1.EPS Page 12 of

13 Transitter ASD 800 / ASD 810 with Attached Reote Seal Questionnaire 80/ EN (page 2 of 2) Gauge pressure, Differential pressure and Flowrate Measureent 1 Mediu to be easured Measuring instruent with one reote seal (see Fig. 3) Measuring instruent with two reote seals (see Fig. 4) Operating data of the ediu to be easured which will be referred to for the calculation and design Teperatures Process pressure Measuring span Differential pressure Density of the gas above the process Process variable (e.g A) Elevation between reote seal and easuring instr. Instruent above the reote seal Instruent below the reote seal Difference in elevation of the two reote seals 5 Capillary tube length + (HP) side (LP) side 6 Additional data Process teperature range Average abient teperature at the easuring instr. Average abient teperature at the capillary tube t p a a M M + t M fro... to... t um t uk kg/ 3 0/4...20A t p1 p2 M p p 1 p 2 M e t M fro... to... t um t uk kg/ 3 0/4...20A 7 Data of liits which for exaple can occur with cleaning processes or blowing through (not easuring operation) Teperature Pressure t ax t in pax pin t ax t in pax pin Note: Reote seals with silicone oil (standard) ay be ounted up to a axiu of 5 below the easuring instruent. Measuring instruent Fig. 3 Fig. 4 Reote seal p2 h+ Measuring instruent 0 p 1 e Piping h Reote seal Piping p1 Measuring instruent Reote seal e.g. also with filter easureents; in front of and behind the filter Copiled:,Date 19 Copany stap (Signature) M01282E1.EPS Page 13 of 20

14 Flush Diaphrag Seal / Extended Diaphrag Seal DN 50 / DN 2", DN 80 / DN 3" coplete with Flange Diensional Diaphrag Sealin rings and fixing aterials not supplied! Directly Connected M Flush diaphrag reote seals Mounting with Capillary Tube M Flush diaphrag reote seals M Extended diaphrag reote seals M Extended diaphrag reote seals For V13 Sealing Surface Sealing Surfaces: For E (DIN 2526), For N (DIN 2512), For RF (ANSI B16.5) Noinal diaeter DN Pressure rating PN i D i k Extension-i d 1 i d 2 i d 3 t b Screws Nuber Thread PN 16/ M PN M 20 PN M 20 PN 16/ M PN M 20 PN M 24 class M 18 2" class M 18 class M 18 class M 16 3" class M 20 class M 20 Page 14 of

15 Flush Diaphrag Reote Seals DN 25 / DN 1", Miniature Reote Seals Diensional Diagras Flush Diaphrag Reote Seals DN 25 / DN 1" with internal Diaphrag PN 10/40 or Class 150 / 300 Miniature Reote Seals PN or Class 600 / 1500 DN (G) PN Diensions in d M SW d l h Weight in kg G 1 A G 1 1/2 A effective diaphrag diaeter d M SW width across flats Connection acc. to DIN 2501 DN PN Diensions in D k d 4 b f H d 2 G / / xM xM xM Connection acc. to ANSI B 16.5 DN Class Diensions in D k d 2 d 4 b f H G 2 UNC 1" 1" x5/8" x7/8" Page 15 of 20

16 In-Line Reote Seals, Fast Coupeld Reote Seals Diensional Diagras In-Line Reote Seals (witout flanges) Fast Coupled Reote Seals M with Running Union DN 50, PN 25 ax SW27 width across flats 27 Connection acc. to DIN 2501 / acc. to ANSI B 16.5 acc. to DIN DN in / inch PN in / psi Diensions in D L H Weight in kg Diensions in Design Weight d M D H ca. k G 2 in kg 25 / 1" / Rd 78 x1/6 For D-F / 1 1/2" 50 / 2" / / M with Clap-connection DN 2", PN 40 ax 80 / 3" / Diensions in d M D H ca. h ca. Weight in kg effective diaphrag diaeter d M Page 16 of

17 Transitter ASD 800 / ASD 810 for Flush / Extended Diaphrag Reote Seals and Fast Coupled Reote Seals Diensional Diagras Errors and oissions excepted. All diensions in illieters (). 1 Reote seal connection 2 Electrical connection: Pg 13.5 cable gland or two cable glands, one each on the righr and left or 1/2-14 NPT feale threads on both sides or one Han 8U plug. 3 Type plate 4 Locking excenter (only with EEx d - design) Order No. V15956AE-... V15957AE-... Order No. V15936AE-... Di. "a" Enclosure cover (electrical connection, connection for digital- / analogue indicating instruent) 6 Tie-on plate e.g. for tag nuber (option) 7 T-slot for screws when wall or pipe ounting Di. "b" With digital indicating instruent plus 29. With analogue indicating instruent plus 24. 2) With directly connected reote seal the length (height) of the reote seal ust be added to diensions "a" and b (see corresponding diensional diagra) Page 17 of 20

18 Transitter ASD 800/ASD 810 for Miniature / In-Line Reote Seals and Flush Diaphrag Reote Seals DN 25 / DN 1" (up PN 63 / Class 600) Diensional Diagras Errors and oissions excepted. All diensions in illieters (). ~28 ~ Contrans 5 a b c MA1027X1.EPS ~ ø82 1 Reote seal connection 2 Electrical connection: Pg 13.5 cable gland or two cable glands, one each on the righr and left or 1/2-14 NPT feale threads on both sides or one Han 8U plug. 3 Type plate 4 Locking excenter (only with EEx d - design) Order No. V15956AE-... V15957AE-... Order No. V15936AE-... Di. "a" Di. "b" Di. "c" Enclosure cover (electrical connection, connection for digital- / analogue indicating instruent) 6 Tie-on plate e.g. for tag nuber (option) 7 T-slot for screws when wall or pipe ounting With digital indicating instruent plus 29. With analogue indicating instruent plus 24. With directly connected reote seal the length (height) of the reote seal ust be added to diension "c" (see corresponding diensional diagra). Page 18 of

19 Page 19 of 20

20 ABB Autoation Products GbH Schillerstraß e 72 D Minden Tel. +49(0) Fax +49(0) Subject to technical changes. Printed in the Fed. Rep. of Gerany 10/

with remote seals for gauge / absolute pressure and level Spans:6 kpa MPa ( psi) 6 kpa abs... 3 MPa abs. (0.9...

with remote seals for gauge / absolute pressure and level Spans:6 kpa MPa ( psi) 6 kpa abs... 3 MPa abs. (0.9... Multi Vision 2020TG/TA Digital transitters with reote seals for gauge / absolute pressure and level Spans:6 kpa... 60 MPa (0.9...9000 psi) 6 kpa abs.... 3 MPa abs. (0.9...450 psia) 10/15-4.15 EN M01515x1.tif

More information

Level transmitter LT 100

Level transmitter LT 100 KROHNE 09/2001 7.02363.21.00 GR/PRINTO Level transmitter LT 100 Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters

More information

Multi Vision. Digital Transmitter 10/ EN

Multi Vision. Digital Transmitter 10/ EN Multi Vision Digital Transmitter 2010TD for Differential Pressure, Flow Rate and Level Spans: 50 Pa... 10 MPa (0.2 in. H 2 O...1500 psi) 2 kpa... 2 MPa abs. (8 in. H 2 O... 300 psia) 2010TDSW.TIF Measured

More information

Liquid level instruments BM 24 /BM 51

Liquid level instruments BM 24 /BM 51 KROHNE 09/2001 7.02362.21.00 GR/PRINTO Liquid level instruments / Status: 10/99 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters

More information

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20

More information

Pressure Measurement Single-range transmitters for general applications

Pressure Measurement Single-range transmitters for general applications Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials

More information

S265 Remote seals with capillary tube. 2600T Series Pressure Transmitters. Engineered solutions for all applications

S265 Remote seals with capillary tube. 2600T Series Pressure Transmitters. Engineered solutions for all applications Contents Data Sheet S265 2600T Series Pressure Transmitters Engineered solutions for all applications Wide range of remote seal types Allows optimum design for each application without compromising performance

More information

Torque Tube TB300 Digital Transmitters

Torque Tube TB300 Digital Transmitters Page 1 of 7 7E.300-E Issue 4-2009 Description Series TB300 torque tube liquid level instruments utilize the buoyancy exerted on a displacer when immersed in a liquid. The buoyancy on the displacer is proportional

More information

Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765

Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Electropneumatic Positioner Type 4763 Pneumatic Positioner Type 4765 Application Single-acting positioner for attachment to pneumatic control valves. Supplied with either an electric input signal from

More information

2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters. Kent-Taylor

2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters. Kent-Taylor INDUSTRIAL INSTRUMENTS AND CONTROLS SPECIALIST Kent-Taylor 2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters Features Include Base accuracy : ±0.075% Span limits

More information

Differential Pressure Transmiter

Differential Pressure Transmiter Differential Pressure Transmiter Description The is an economical alternative to established differential pressure transmitters. It combines state of the art electronics and a high performance sensor;

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and

More information

Pressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview

Pressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview f gauge pressure Siemens AG 010 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection

More information

GA24 Technical Datasheet

GA24 Technical Datasheet GA24 Technical Datasheet Variable-area flowmeter Sturdy construction for several applications Local indication without auxiliary power Replaceable mounting parts KROHNE CONTENTS GA24 1 Product features

More information

IDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05

IDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05 IDL0 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger

More information

1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure

1 Overview. Pressure Measurement Transmitters for basic requirements. 1/16 Siemens FI SITRANS P220 for gauge pressure Siemens AG 204 Overview The pressure transmitter SITRANS P220 measures the gauge pressure of liquids, gases and vapors. Stainless steel measuring cell, fully welded Measuring ranges 2.5 to 600 bar (36.3

More information

DM01. Please visit our website: Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

DM01. Please visit our website:  Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05 DM0 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing

More information

L (up to 25 m) Electronic part. working temp.: Ñ IP 66 / IP67. Mounting bracket ÐÑ. Sensor type. working temp.:

L (up to 25 m) Electronic part. working temp.: Ñ IP 66 / IP67. Mounting bracket ÐÑ. Sensor type. working temp.: Smart level probe type APC-2000ALW/L Programmable zero shift, range and damping ratio 4...20 ma output signal + HART protocol Accuracy 0,16% Local display Intrinsic safety certificate (ATEX, IECEx) II

More information

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS

Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. An electric standardized signal of 4 to 20 ma or

More information

High-performance submersible pressure transmitter For level measurement Model LH-10

High-performance submersible pressure transmitter For level measurement Model LH-10 Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well

More information

2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure

2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection

More information

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø

More information

Siemens AG psi (6 bar) 145 psi (10 bar) 464 psi (32 bar) 1450 psi (100 bar) 3626 psi (250 bar) 8700 psi (600 bar) psi (800 bar)

Siemens AG psi (6 bar) 145 psi (10 bar) 464 psi (32 bar) 1450 psi (100 bar) 3626 psi (250 bar) 8700 psi (600 bar) psi (800 bar) Technical specifications SITRANS P, DS III series Input Measured variable Spans (infinitely adjustable) or nominal measuring range and max. permissible test pressure HART Gauge pressure Span (min.... max.)

More information

MXV-E. Variable Speed Multi-Stage Vertical Pumps (max 2900 rpm)

MXV-E. Variable Speed Multi-Stage Vertical Pumps (max 2900 rpm) Variable Speed Multi-Stage Vertical Pups (ax 9 rp) Construction Vertical ulti-stage pups with suction and delivery connections of the sae diaeter and arranged along the sae axis (in-line). Corrosion-resistant

More information

ETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. Type: ETd 04. class 0.05

ETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor.  Type: ETd 04. class 0.05 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 100 mbar up to 0... 400 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing

More information

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI Siemens AG 06 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure

More information

9700 Transmitter Submersible hydrostatic level transmitter

9700 Transmitter Submersible hydrostatic level transmitter Specification sheet IP0078 October 2007 Level 9700 Transmitter Submersible hydrostatic level transmitter Description The 9700 series hydrostatic level transmitter is designed to perform in the most arduous

More information

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/16 Siemens FI US Edition Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.

More information

Differential pressure

Differential pressure Differential pressure 9 Overview Page 200 VEGADIF 65 Page 202 Chemical seal Page 204 Accessory Page 208 199 VEGADIF For differential pressure, level and flow measurements Measuring principle The sensor

More information

LMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.

LMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0. LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mho up to 0... 50 mho Output signals -wire: 4... 0 ma -wire: 0...

More information

SITRANS P measuring instruments for pressure

SITRANS P measuring instruments for pressure Remote seals for transmitters and pressure gauges Technical description Overview In many cases the pressure transmitter and the measured medium have to be physically separated. It is then necessary to

More information

Features. Description

Features. Description Features Fast response flow meter ideal for inert gas and liquid mass flow measurement applications Smart electronics permit field adjustment of critical flow meter settings Field validation of flow meter

More information

Monitoring device NTS 30

Monitoring device NTS 30 P R O D U C T I N F O R M A T I O N Electronic level- and temperature monitoring device Monitoring device NTS 30 Contents Description Description... 2 Operating... 3 Design and electrical data... 4 Circuit

More information

Pressure Measurement Single-range transmitters for general applications

Pressure Measurement Single-range transmitters for general applications Siemens AG 07 Overview Function U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/ Equipotential bonding Diaphragm The pressure

More information

Pressure Measurement Single-range transmitters for general applications

Pressure Measurement Single-range transmitters for general applications Siemens AG 206 Overview Design Device structure without explosion protection The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure.

More information

S261 Remote seals with capillary tube

S261 Remote seals with capillary tube Contents Data Sheet SS/S261EN Rev. 0 S261 2600T Series Pressure Transmitters Engineered solutions for all applications Measurement made easy Wide range of remote seal types llows optimum design for each

More information

2600T Series Pressure Transmitter

2600T Series Pressure Transmitter Data Sheet 2600T Series Pressure Transmitter Model 261GC/GG/GJ/GM/GN Gauge Model 261AC/AG/AJ/AM/AN Absolute with direct mount seal Base accuracy: ±0.15 % Span limits 0.3 to 60000kPa; 1.2inH 2 O to 8700psi

More information

JUMO dtrans p30 Pressure Transmitter

JUMO dtrans p30 Pressure Transmitter 609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure

More information

MXV. Vertical Multi-Stage In-Line Pumps. Construction. Applications

MXV. Vertical Multi-Stage In-Line Pumps. Construction. Applications MXV Construction Vertical ulti-stage pups with suction and delivery connections of the sae diaeter and arranged along the sae axis (in-line). Corrosion-resistant bearing sleeves lubricated by the puped

More information

Technical Data. General specifications Switching element function Rated operating distance s n 2 mm

Technical Data. General specifications Switching element function Rated operating distance s n 2 mm 0102 Model Number Features 2 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-12 Quick mounting bracket with dead stop BF 12 Mounting flange, 12 mm Technical Data specifications Switching

More information

ATM.1ST/Ex - High Precision Transmitter

ATM.1ST/Ex - High Precision Transmitter Pressure Transmitter - ATEX / IECEx certified ATM.1ST/Ex - High Precision Transmitter CUSTOMER BENEFITS Certificate: ATEX, IECEx & EAC High measurement accuracy is ensured by sophisticated digital temperature

More information

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI US Edition

1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI US Edition Siemens AG 07 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure

More information

DMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0.

DMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0. Pressure Transmitter for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0. % FSO Nominal pressure from 0... 40 mbar up to 0... 0 bar Output signals -wire:

More information

Technical Data. General specifications. Rated operating distance s n 5 mm

Technical Data. General specifications. Rated operating distance s n 5 mm 0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching

More information

Precision pressure sensor Basic version Model CPT6020

Precision pressure sensor Basic version Model CPT6020 Calibration Precision pressure sensor Basic version Model CPT6020 WIKA data sheet CT 25.13 Applications Calibration technology High-accuracy pressure monitoring Pressure sensing in critical applications

More information

INDUSTRIAL. Pressure Transmitters. Product Guide. Low cost to high accuracy portfolio. Ranges from 70 mbar to 1400 bar. Flexible, rugged and reliable

INDUSTRIAL. Pressure Transmitters. Product Guide. Low cost to high accuracy portfolio. Ranges from 70 mbar to 1400 bar. Flexible, rugged and reliable INDUSTRIAL Pressure Transmitters Product Guide Low cost to high accuracy portfolio Ranges from 70 mbar to 1400 bar Flexible, rugged and reliable Fixed and rangeable 4-20mA outputs Electrical/pressure connection

More information

SITRANS. Pressure transmitter SITRANS P, Z series for gauge and absolute pressure. Introduction. Safety instructions 2.

SITRANS. Pressure transmitter SITRANS P, Z series for gauge and absolute pressure. Introduction. Safety instructions 2. Introduction 1 Safety instructions 2 SITRANS Pressure transmitter SITRANS P, Z series for gauge and absolute pressure 7MF1564 Description 3 Assembly and connection 4 Technical data 5 Dimensional drawings

More information

Miniature flowmeters DK 46, DKR 46 DK 47, DK 48, DK 800

Miniature flowmeters DK 46, DKR 46 DK 47, DK 48, DK 800 KROHNE 1/22 7.236.22. GR Miniature flowmeters DK 46, DKR 46 DK 47, DK 48, DK 8 Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters

More information

Type N-10, N-11 Hazardous Area Non-incendive Transmitters

Type N-10, N-11 Hazardous Area Non-incendive Transmitters Electronic Pressure Catalog > Hazardous Area > N-10, N-11 Type N-10, N-11 Hazardous Area Non-incendive Transmitters Applications Natural gas compressors Wellhead monitoring Pipeline pressure General industrial

More information

Hydrostatic. Continuous level measurement. Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 AL-EN

Hydrostatic. Continuous level measurement. Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 AL-EN Hydrostatic Continuous level measurement 8 Overview Page 188 VEGAWELL 52 Page 190 VEGABAR 86, 87 Page 192 Accessory Page 196 187 Hydrostatic Level and pressure measurement Measuring principle The pressure

More information

ATM.ECO/IS - Analog Transmitter with Temperature compensation

ATM.ECO/IS - Analog Transmitter with Temperature compensation Pressure Transmitter - FM / FM-C certified ATM.ECO/IS - Analog Transmitter with Temperature compensation CUSTOMER BENEFITS Certificate: FM, FM-C & IECEx & ATEX Entry level series into precision pressure

More information

Pressure Switches Application Guideline

Pressure Switches Application Guideline Pressure Switches Application Guideline Product Overview The Fema Pressure Switch product portfolio provides devices suitable for many applications. The portfolio contains Special functions and equipment

More information

Programmable pressure and temperature transmitters PTM/RS485

Programmable pressure and temperature transmitters PTM/RS485 Programmable pressure and temperature transmitters PTM/RS485 Version: 03-28-2012 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x

More information

Model NDA Differential pressure transmitter. Deltapi N Series A complete range of pneumatic pressure transmitters

Model NDA Differential pressure transmitter. Deltapi N Series A complete range of pneumatic pressure transmitters Data Sheet DS/NDA-EN Rev. H Model NDA Differential pressure transmitter Deltapi N Series A complete range of pneumatic pressure transmitters Introduction The blind type differential pressure transmitter

More information

x act i Precision- Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor

x act i Precision- Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor Precision- Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output

More information

High-performance submersible pressure transmitter For level measurement Model LH-10

High-performance submersible pressure transmitter For level measurement Model LH-10 Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-10 WIKA data sheet PE 81.09 Applications Level measurement in rivers and lakes Deep well

More information

Technical Data. Dimensions

Technical Data. Dimensions 00 Model Number Features mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,

More information

NivuBar Plus II

NivuBar Plus II NivuBar Plus II Ceramic diaphragm Capacitive measuring cell 2-wire technology (output 4-20 ma) Integrated overload protection Extensive, almost front flush diaphragm Ex approval for zone 0 as standard

More information

OPTIBAR P 1010 C Technical Datasheet

OPTIBAR P 1010 C Technical Datasheet Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability

More information

Technical Datasheet. Pressure Transmitter: Analogue Series 387. Performance characteristics. Product applications. How can we help you?

Technical Datasheet. Pressure Transmitter: Analogue Series 387. Performance characteristics. Product applications. How can we help you? Technical Datasheet Pressure Transmitter: Analogue Series 387 387 ISSUE G High Accuracy ± 0.15%. Ranges from 1 bar to 1000 bar. 4 : 1 turndown. 4-20mA analogue with digital communications. 316 stainless

More information

780S Ultra High Purity Series

780S Ultra High Purity Series Smart Ultra High Purity Thermal Gas Mass Flow Meter Features Measures mass flow directly, no seperate temperature or pressure inputs required Field adjustment of critical flow meter settings via on-board

More information

Model 261GR for gauge pressure Model 261AR for absolute pressure

Model 261GR for gauge pressure Model 261AR for absolute pressure Change from one to two columns Data Sheet SS/261GR/AR-EN Rev. 07 Model 261GR for gauge pressure Model 261AR for absolute pressure 2600T series pressu re transmitters Engineered solutions for all applications

More information

Pilot valves for pilot operated servo valves

Pilot valves for pilot operated servo valves Data sheet Pilot valves for pilot operated servo valves The range of pilot valves consists of: Constant-pressure pilot valve, type CVP (LP) and CVP (HP) Differential-pressure pilot valve, type CVPP (LP)

More information

Programmable pressure and temperature transmitters PTM/RS485

Programmable pressure and temperature transmitters PTM/RS485 Programmable pressure and temperature transmitters PTM/RS485 Version: 26.06.2014 Technical Specifications Pressure measuring range (bar) 0.1... 0.5 > 0.5 2 > 2 25 Overpressure 3 bar 3 x FS ( 3 bar) 3 x

More information

Pressure transmitters EMP 2

Pressure transmitters EMP 2 Data sheet Pressure transmitters EMP 2 The high accuracy pressure transmitter EMP 2 is designed for monitoring and control in marine and industial applications and offers a reliable pressure measurement,

More information

Hydrostatic Level and Pressure Measurement

Hydrostatic Level and Pressure Measurement Hydrostatic Level and Pressure Measurement NIVUS- Your Partner In the fields of pressure measurement and hydrostatic level measurement technology NIVUS offers individual solutions for various applications.

More information

x act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.

x act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0. Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output

More information

3000 Series OPTIMASS Mass Flowmeter. Stainless Steel Hastelloy

3000 Series OPTIMASS Mass Flowmeter. Stainless Steel Hastelloy KROHNE 07/2005 7.02446.25.00 GR 3000 Series OPTIMASS Mass Flowmeter with single Z-shaped measuring tube Stainless Steel Hastelloy Status: 10/99 One tube no limits No limits with tube material No limits

More information

UNIK 5600/5700 Marine Certified Pressure Sensing Platform

UNIK 5600/5700 Marine Certified Pressure Sensing Platform GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.

More information

Technical Data. General specifications Switching element function Rated operating distance s n 5 mm

Technical Data. General specifications Switching element function Rated operating distance s n 5 mm 00 Model Number Features 5 mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,

More information

Level switches Series LD Vibrating fork level switch for liquids and solids

Level switches Series LD Vibrating fork level switch for liquids and solids Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant

More information

Pressure transmitter PASCAL Ci4

Pressure transmitter PASCAL Ci4 Pressure transmitter PASCAL Ci4 for general application,type Series CI4100 Features Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids High-resolution

More information

Pressure Measurement Transmitters for applications with advanced requirements (Advanced)

Pressure Measurement Transmitters for applications with advanced requirements (Advanced) Siemens AG 206 Technical specifications SITRANS P DS III series for absolute pressure (from the gauge pressure series) Input Measured variable Absolute pressure Span (fully adjustable) or measuring range,

More information

Hidrostatic Level DATASHEET

Hidrostatic Level DATASHEET Hidrostatic Level DATASHEET JUNHO 2013 Hydrostatic level probes SGE-25 and SGE-16 SG cable hanger Red (+) Capillary Black ( ) PP junction box Any measurement range from 1 up to 500 m H 2 O Integrated internal

More information

High-performance submersible pressure transmitter For level measurement Model LH-20

High-performance submersible pressure transmitter For level measurement Model LH-20 Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater

More information

Technical Data. Dimensions

Technical Data. Dimensions 0102 Model Number Features Comfort series 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories BF 18 Mounting flange, 18 mm EXG-18 Quick mounting bracket with dead stop Technical Data specifications

More information

The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions

The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions The M-Series Eletta Flow Meter High accuracy DP Flow Meter with multiple functions Flow Meter with multiple functions for gases and liquids M3 The M-series Flow Meter, with its versatile and user-friendly

More information

High-performance submersible pressure transmitter For level measurement Model LH-20

High-performance submersible pressure transmitter For level measurement Model LH-20 Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater

More information

C-Flow Coriolis Mass Flow Meters

C-Flow Coriolis Mass Flow Meters Coriolis Mass Flow Meters Ready for Take Off The New Compact C-Flow Küppers Elektromechanik GmbH The C-Flow The C-Flow Coriolis Mass Meters consist of two components: KCE Transmitter KCM Transducer 2 KEM

More information

RTX 1000H Series. Versatile Transmitters for a World of Pressure. GE Measurement & Control. Features

RTX 1000H Series. Versatile Transmitters for a World of Pressure. GE Measurement & Control. Features GE Measurement & Control RTX 1000H Series Versatile Transmitters for a World of Pressure GE Measurement & Control is renowned for the design and manufacture of compact and rugged high performance pressure

More information

ED 701 Hygenic Pressure Transmitter

ED 701 Hygenic Pressure Transmitter ED 701 Hygenic Pressure Transmitter Hygienic process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response time < 25 ms (Option

More information

Technical Datasheet. D Series SMART Pressure Transmitter Model: DPC D-Series. Key Features. Series Overview. Product applications

Technical Datasheet. D Series SMART Pressure Transmitter Model: DPC D-Series. Key Features. Series Overview. Product applications Technical Datasheet D Series SMART Pressure Transmitter Model: DPC-2000 Key Features ATEX - Flameproof and Intrinsically Safe IECEx - Flameproof and Intrinsically Safe SIL 2 certificate Compliant to NAMUR

More information

Bourdon tube pressure gauge for diaphragm seals

Bourdon tube pressure gauge for diaphragm seals Bourdon tube pressure gauge for diaphragm seals and switch function, Type series BR42.. Features Bourdon tube pressure gauge for diaphragm seal and switch function Nominal range -1 3 bar to -1 15 bar,

More information

Tapped exhaust port. Sturdy, simple, reliable design. Easy to add on Feedback. High gain pilot valve. Simple calibration, external zero adjustment

Tapped exhaust port. Sturdy, simple, reliable design. Easy to add on Feedback. High gain pilot valve. Simple calibration, external zero adjustment Electropneumatic Positioner Sturdy, simple, reliable design High gain pilot valve Built in gauge ports Tapped exhaust port Easy to add on Feedback Unit F5 Simple calibration, external zero adjustment Bright

More information

ATM.ECO - Analog Pressure Transmitter

ATM.ECO - Analog Pressure Transmitter Pressure Transmitter ATM.ECO - Analog Pressure Transmitter CUSTOMER BENEFITS Entry level series into precision pressure measurement High measurement accuracy is ensured by sophisticated digital temperature

More information

Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC

Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring

More information

Level switches Series LD Vibrating fork level switch for liquids and solids

Level switches Series LD Vibrating fork level switch for liquids and solids Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant

More information

Technical Data Sheet. OPTIMASS 7000 Custody Transfer Mass Flowmeter

Technical Data Sheet. OPTIMASS 7000 Custody Transfer Mass Flowmeter Technical Data Sheet KROHNE 12/2004 7.02516.21.00 CH/GR OPTIMASS 7000 Custody Transfer Mass Flowmeter with single straight measuring tube OIML R117 Pattern Approval Accuracy classes 0.3 / 0.5 / 1.0 / 1.5

More information

200A Series ELECTRONIC LEVEL TRANSMITTER

200A Series ELECTRONIC LEVEL TRANSMITTER MARINE - WATER AND PROCESS INDUSTRIES LIQUID LEVEL AND CONTENTS APPLICATIONS HYDROSTATIC OPERATION 200A Series ELECTRONIC LEVEL TRANSMITTER INTRINSICALLY SUBMERSIBLE - SCREWED MARINE SAFE FLANGED - HYGIENIC

More information

ATM/Ex - Analog Pressure Transmitter

ATM/Ex - Analog Pressure Transmitter Pressure Transmitter - ATEX certified ATM/Ex - Analog Pressure Transmitter CUSTOMER BENEFITS Certificate: ATEX & EAC Fast customization thanks to configurable product design Demountable electrical connector

More information

ATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified

ATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified Intrinsically safe pressure transmitters ATM/Ex - Intrinsically Safe Analog Pressure Transmitter - ATEX / IECEx Certified CUSTOMER BENEFITS Certificate: ATEX & IECEx Fast customization thanks to configurable

More information

How to specify a product. Process Sensors and Mechanical Instruments

How to specify a product. Process Sensors and Mechanical Instruments How to specify a product Process Sensors and Mechanical Instruments Keep the overview. Here is some guideline information on how to specify our products. Intended as supplementary help to specification

More information

Technical Data. General specifications Switching element function Rated operating distance s n 1.5 mm

Technical Data. General specifications Switching element function Rated operating distance s n 1.5 mm 0102 Model Number Features 1.5 mm flush Accessories BF 8 Mounting flange, 8 mm Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 1.5 mm Installation flush

More information

High-performance submersible pressure transmitter For level measurement Model LH-20

High-performance submersible pressure transmitter For level measurement Model LH-20 Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater

More information

Series INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN

Series INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries. Description ALL STAINLESS DESIGN INTELLIGENT PRESSURE- AND LEVEL TRANSMITTERS For all industries Series 2000 ALL STAINLESS DESIGN EASY CALIBRATION WITHOUT TEST PRESSURE BY 3 PUSH BUTTONS ACCURACY 0,1% 4-20 ma AND HART PROTOCOL ATEX II

More information

Technical Specifications

Technical Specifications V200P Pneumatic Positioner Input range: 3-5 PSI 20-00 kpa Supply pressure: 45 PSI < MPa Linearity error:

More information

VA40 - VA45 Technical Datasheet

VA40 - VA45 Technical Datasheet VA40 - VA45 Technical Datasheet Variable area flowmeter Local indication without auxiliary power Adaptable to meet customers' requirements Replaceable mounting parts KROHNE CONTENTS VA40 - VA45 1 Product

More information

Siemens AG Span (min... max.) Max. perm. test. 87 psi (6 bar) 145 psi (10 bar) 464 psi (32 bar) 1450 psi (100 bar)

Siemens AG Span (min... max.) Max. perm. test. 87 psi (6 bar) 145 psi (10 bar) 464 psi (32 bar) 1450 psi (100 bar) SITRANS P S III for gauge/absolute pressure, Technical specifications SITRANS P S III series for gauge and absolute pressure, HART PROFIBUS PA and FOUNATION Fieldbus Input of gauge pressure, Measured variable

More information

High-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20

High-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20 Electronic pressure measurement High-performance submersible pressure transmitter For level measurement in hazardous areas Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements

More information