Air Preparation Products. Filters, Regulators, Lubricators, & Airline Accessories. Catalog 0700P-E

Size: px
Start display at page:

Download "Air Preparation Products. Filters, Regulators, Lubricators, & Airline Accessories. Catalog 0700P-E"

Transcription

1 aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding ir Preparation Products Filters,, Lubricators, & irline ccessories atalog 7P-

2 ir Preparation Products atalog 7P- istributor Network, Warning, Offer of Sale ISTRIUTION NTWORK t Parker, we have the largest global distribution network in motion and control, with over 7,5 distributors serving more than 422, customers. To find the distributor nearest you, please visit our ISTRIUTOR LOTOR at NGINRING YOUR SUSS.! WRNING FILUR OR IMPROPR SLTION OR IMPROPR US OF TH PROUTS N/OR SYSTMS SRI HRIN OR RLT ITMS N US TH, PRSONL INJURY N PROPRTY MG. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. ue to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled Offer of Sale. opyright ll Rights Reserved

3 atalog 7P- Index ir Preparation Products Introduction Introduction Global ir Preparation System Filters,, Lubricators Stainless Steel FRLs Global ir Preparation Systems Filters,, Lubricators Stainless Steel FRLs Proportional (P1P, P2P & PR TM -15) F Proportional LV / Z Lockout Valves (Lockout Valves) Integrated Fittings G H LV / Z Lockout Valves Integrated Fittings ccessories J ccessories all Valves / Plug Valves K all Valves / Plug Valves Quick ouplings L Quick ouplings Hose & Fittings Tubing & Fittings Safety Guide, Offer of Sale M N P Hose and Fittings Tubing and Fittings s Model to Page Number Index 1

4 ir Preparation Units Section s ial 27 Series Introduction Product Selection...2- pplication Guide R Semi R Semi- ial R Semi- ial R Semi- ial R Semi- ial PR2 High PR12 High PR12P High PR171 High P P28 Pneumatic P45 Pneumatic...-1 OL ITMS R MOST POPULR. 1

5 Introduction 27 Series ial s atalog 7P- Pipe Sizes 1/4 thru 2 Inch Flows to 15 SFM Pressures to 5 PSIG ir regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. 27R Series, 1/4 Inch 27 Series, 1/4 Inch ial 51R Series, 1/4 Inch ial 52R Series, 1/4 thru /4 Inch ial 5R Series, /4, 1 and 1-1/4 Inch ial 54R Series, 1-1/2 and 2 Inch ompact High PR2 Series, 1/4 Inch Standard High PR12 Series, 1/4 Inch High PR12P Series, 1/4 Inch High PR171 Series, 1/4 Inch P62 Series, 1/4 Inch Pneumatic P28 Series, 1/4 Inch Pneumatic P45 Series, 1/2 and /4 Inch Selection 1. etermine maximum system flow requirements. 2. etermine maximum allowable pressure drop at rated flow in SFM.. Refer to flow chart and select regulator by choosing the curve that offers minimum pressure drop at desired flow in SFM. ir Preparation Units Reading Flow harts to Size Output Pressure kpa Output Pressure PSIG Flow haracteristics Model PR12 9 PSIG Setpoint (62 kpa) 75 PSIG Setpoint (517 kpa) 6 PSIG Setpoint (414 kpa) 45 PSIG Setpoint (1 kpa) PSIG Setpoint (26 kpa) Q, SFM Q, LPM Once the required flow is determined for a pneumatic application the regulator or filter/regulator can be selected by using the flow chart. The chart serves two different purposes. To read the flow, use the right side of the chart. To read the relief characteristics use the left side of the chart. When reading the flow chart, first determine the secondary pressure that will be used. Find the appropriate pressure curve on the graph. Given an acceptable pressure drop for an application, follow the flow curve until it intersects the pressure drop point. This will give the flow at that particular pressure drop.! WRNING Supply Pressure = 1 PSIG (69 kpa) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. 2

6 atalog 7P- ial & ial The ial is a constant bleed, piston operated regulator. The pilot controlled pressure reducing valve provides exceptionally high air flow with steady pressure control and minimal secondary pressure drop. The non-rising adjustment knob provides quick selection of the desired secondary pressure in less than one full turn. The adjustment knob also can serve as the pressure indicator thereby eliminating the need for a pressure gauge. This regulator is specifically designed for applications requiring more accurate air circuit control, high air flow capacity with flat performance curves and quick regulator adjustment. The regulator can be used as a conventional regulator for standard air circuits or as a pilot regulator to provide pressure to the control chamber of a pilot operated (slave) regulator. Operation To set the regulator, turn the large dial adjustment knob to the desired secondary set pressure. This opens the pilot valve seat allowing air flow into the control chamber which forces the lower piston downward against the relief seat and opens the main valve. t the same time, the air in the control chamber forces the upper piston upward against elleville springs which closes the pilot valve seat when the set pressure is attained. Secondary pressure in the chamber is now balanced against the control pressure through the lower piston. If demand flow increases, the constant control pressure will force the lower piston and the main valve further downward, and allow more flow downstream. higher than desired secondary pressure will force the lower piston upward, closing the main valve seat and opening the main relief valve seat thereby allowing air to relieve to the atmosphere. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. ir Preparation Units For use in applications that require reliable performance and accurate pressure control.this type of regulator is generally used for material handling systems, flow and temperature controllers, critical air control circuits, medical and scientific test equip-ment, and valve positioners. Operation Set the desired secondary pressure by turning the adjustment knob clockwise. This action increases the regulating spring force against the top of the diaphragm disc. When the spring force above exceeds the air pressure beneath the diaphragm, it is transmitted by the valve stem and opens the valve. irflow through the regulator now occurs. precisely designed and positioned aspirator tube constantly transmits the secondary pressure to the under side of the diaphragm so that during flow conditions any pressure loss can be quickly compensated for. When flow is no longer required, the outlet pressure increases slightly, allowing the diaphragm to rise, the valve to close, and set pressure to be maintained. On self-relieving models, if outlet pressure should increase above the set pressure, the diaphragm will rise therefore opening the relief seal between the diaphragm and the valve. The excess outlet pressure is then vented through the diaphragm orifice into the bonnet and subsequently to the atmosphere through an orifice in the bonnet. For best performance, regulated pressure should always be set by increasing the pressure to the desired setting. Introduction 27 Series ial s

7 atalog 7P- pplication Guide ir Preparation Units pplication Guide Pneumatic pressure regulators are designed to provide a constant pressure output from a fluctuating supply pressure much the way an electronic voltage regulator works. Pressure regulators provide varying degrees of accuracy with regard to their reduced pressure output. General Purpose pressure regulators work for most fluid power applications. However, for more pressure-critical applications precision regulators can provide the customer with the control they need. Introduction 27 Series ial partial listing of things that can potentially cause regulator output pressure variation are: Temperature changes } Inlet pressure changes Variations in flow xcess downstream pressure ycling Time Leakage Who needs precision regulators? esign level applications: When designing a pneumatic system it is important to determine not only the air flow that the application will require but also the acceptable level of pressure variation. Some pneumatic applications cannot tolerate fluctuations in pressure. These applications can include static situations with only a steady pressure maintained, or dynamic flow situations involving any number of changing variables in play while trying to maintain a constant pressure. Problem solving device for existing applications: Sometimes an existing pneumatic application does not meet the customer s needs with regards to pressure control and/or stability. ny or all of the variables listed above can cause issues with pressure stability. s applications are expanded, added on to, or modified the pressure and flow requirements can change. Pressure (PSIG) Upper Pressure Limit Lower Pressure Limit Regulated Pressure for pplication Time Plant ir Supply Pressure Range Supply Pressure Variation s How do precision regulators differ from general purpose pneumatic regulators? High General Purpose xamples- PR2, 27R, ial, 5R, 6R, 7R, PNR, R119 PR12, PR12P, R216 PR171 Sensitivity:.5 to.1 PSIG Reduced pressure repeatability/variation (1/8 to 1/4 of 1 to 2 PSIG to 4 PSIG under no-flow condition water column) s ability to control egins to relieve at egins to relieve at egins to relieve at back pressure accurately:.5 to.1 PSIG.5 to 2 PSIG 5 to 1 PSIG *key for cylinder applications overpressure overpressure overpressure s ability to maintain set pressure under varying flow, High Medium Standard input pressure, temperature conditions: onstant leed - does the regulator constantly bleed a small volume of air Yes No No to the atmosphere to maintain stability? 1" Water olumn =.6 PSI 1PSI = Inches Water olumn 4

8 atalog 7P- pplication hart ir Preparation Units pplication hart Original quipment Manufacturers (OMs) ir Gauging Manufacturers of ir Gauging quipment. nesthesia quipment Manufacturers alibration Stands Similar to Test Stands lamping Pressure ontrol nd ffect Grippers, Roll Loading ontrol Panels Manufacturers and Users oordinate Measuring Machines Manufacturers use in Force ounterbalance pplications in Z-axis ispensing quipment dhesive, Paint, or any other form of Liquid or Gas Food Process Machinery Manufacturers Gas nalyzers Used for Reference and alibration ir Pressures Ink or Paint Robotics Spraying Systems Manufacturers use to Maintain an ven Pressure on System Leak Testing quipment Manufacturers of quipment that etects Leaks (i.e., Plastic ottles) Medical quipment Manufacturers that Utilize for lood Processing and Sampling as xamples Oxygen Ventilators Manufacturers Pharmaceutical Process Machinery Pill or Tablet Making Machines Phone able Pressurization Systems Manufacturers Polishing Machinery Used to Maintain ven Pressure on Polishing Head Semi-conductor Manufacturing Machinery Manufacturers Smoke Stack nalyzers Used for Reference and alibration ir Pressures Soil or nvironmental nalysis quipment Used for Reference and alibration ir Pressures Tank lanketing Maintain Pressure on Top Level of a Tank or Storage Vessel Test quipment Similar to Test Stands Test Stands Manufacturers of Test Stands, Laboratory Test Stands, ngineering Test Stands, Production Test Stands Tool alancers Manufacturers of Tool alancers, Manipulators, and rticulating rms use High Relief apacity in a Force-balancing pplication. Used as part of a Pneumatic ounter-balance System, the helps suspend the tool in the air and then makes it easy to move out of the way when not in use. Web Tensioning Machinery uilders for Printing Presses, Paper onverting, Packaging, Textiles, Plastics. Primarily Unwind Stands and Rewind Stands. System Integrators utomation Integrators nyone Involved in esigns or Projects that utomate Processes Introduction 27 Series ial s nergy ontrols Systems HV nd Users Instrumentation Supervisors Instrumentation Technicians Project ngineers Store Room Supervisors MRO hemical Petrochemical Pulp & Paper Food & rug Refineries Power Mining Oil & Gas nyone who would be involved in esigns that would include amper and Louvre ontrol for HV pplications 5

9 atalog 7P- 27R Series Prep-ir II, 27R Series 1/4", /8" asic 1/4" ody 27R Semi- Features Fine adjustment sensitivity. Good repeatability and minimal pressure drop. High flow capacity. Two 1/4" gauge ports. rass Poppet for long life. High Flow: 25 SFM Modular with 5 Series FRL. Non-rising, removable knob. Multiple porting options. 1/4" NPT Gauge Ports (2) PUSH TO LOK Introduction 27 Series ial s Port Size Pressure Part Number 1/4" 15 PSIG 27R112* 1/4" PSIG 27R11* 1/4" 6 PSIG 27R114* 1/4" 125 PSIG 27R11* Standard part numbers shown bold. For other models refer to ordering information below. NOT: 1.5 ia. (9mm) hole required for panel mounting. Maximum panel thickness 1/4". SFM = Standard cubic feet per minute at 15 PSIG inlet, 9 PSIG no flow secondary setting and 5 PSIG pressure drop.! WRNING 2. (51) 1.28 (2) 27R imensions Inches (mm) 2.6 (52) 4.44 (11).16 (8) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Ordering Information Port Size 1 1/4 Inch 2 /8 Inch Pressure Range 1 PSIG PSIG PSIG 14 6 PSIG OL ITMS R MOST POPULR. 27R 1 1 * --- Relief Relieving ngineering Level * Will be ntered at Factory Port Typ lank NPT 1 SPP 2 SPT Options lank No Options L Preset Non-djustable P Preset djustable S Pressure Limiter Max. djustable T Pressure Limiter Max. Non- djustable Inlet Pressure is 1 PSIG. For other pressures, contact factory. Preset / Pressure Limited lank None XXX* Preset Pressure XXX* Pressure Limited * vailable Preset / Pressure Limited Range, 1 to 9 PSIG in 5 PSIG increments. For higher pressures, contact factory. (xample: 65 = 65 PSIG) 6

10 atalog 7P- Technical Specifications 27R Prep-ir II, 27R Series Semi- Technical Information Secondary Pressure - bar Secondary Pressure - PSIG Flow haracteristics 27R11* 1/4 Inch Ports 1 PSIG (6.9 bar) Primary Pressure Secondary Pressure - bar Secondary Pressure - PSIG Flow haracteristics 27R11* 1/4 Inch Ports 1 PSIG (6.9 bar) Primary Pressure Rated Flow - SFM Flow - dm /s n UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. Secondary Pressure - bar Secondary Pressure - PSIG Flow haracteristics 27R114*1/4 Inch Ports 1 PSIG (6.9 bar) Primary Pressure Rated Flow - SFM Flow - dm /s n Rated Flow - SFM Flow - dm /s n Introduction 27 Series ial 27R Kits & ccessories onnet ssembly Kit... PS91P ontrol Knob... P4421 Gauges 1-1/2" ial Face PSIG ( to 2.1 bar)...k4515n14 6 PSIG ( to 4.1 bar)...k4515n PSIG ( to 11. bar)... K4515N1416 PSIG ( to 2. bar)...k4515n14 2" ial Face 6 PSIG ( to 4.1 bar)... K452N PSIG ( to 11. bar)...k452n1416 PSIG ( to 2. bar)... K452N14 Mounting racket Kit... PS96P Panel Mount Nut Metal... PS964P Service Kit... PS97P Springs 1- PSIG Range...P PSIG Range...P PSIG Range...P PSIG Range...P4425 Specifications leed Rate SFH Gauge Ports (2)... 1/4 Inch ffect of Supply Pressure Variation.5 PSIG (.4 bar) for 25 PSIG (1.7 bar) change in P 1 Relief apacity.5 scfm (.24 dm 2 5 PSIG (.4 bar) increase in P 2 Flow apacity 28 scfm (1.2 dm 2 1 PSIG (6.9 bar) P 1 and 2 PSIG (1.4 bar) P 2 Port Threads... 1/4, /8 Inch Maximum Inlet Pressure PSIG (17.2 bar) Relief Flow scfm Repeatability...±.5 PSIG (±.4 bar) Response ms The valve will open to full flow and fill a volume of 1 in Temperature Rating...2 F to 175 F ( to 8 ) Weight...1. lb. (.45 kg) Materials of onstruction Poppet... rass onnet...plastic ody... Zinc ollar, Knob...Plastic iaphragm... Nitrile ottom ap...plastic Seals... Nitrile Springs Poppet & ontrol... Steel s 7

11 atalog 7P- 27 Series Prep-ir II, 27 Series 1/4", /8" asic 1/2" ody 27 Features xcellent water removal efficiency. High flow. Fine adjustment sensitivity. Good repeatability and minimal pressure drop. Modular with 5 Series FRL Non-Rising removable adjustment knob. 1/4" NPT Gauge Ports (2) PUSH TO LOK High Flow: 2 SFM Introduction 27 Series ial Port Size NPT Twist rain Poly owl / Sight Gauge 1/4" 27121* /8" 27221* Metal owl / Sight Gauge 1/4" 27141* /8" 27241* Standard part numbers shown bold. For other models refer to ordering information below. For Polycarbonate owl, see aution on page 2. SFM = Standard cubic feet per minute at 15 PSIG inlet, 9 PSIG no flow secondary setting and 1 PSIG pressure drop.! WRNING F istance Required To Remove ll owls Regardless Of rain Option 27 imensions 2. (51) 5.5 (16) 2.6 (52) 8.51 (216) Inches (mm) With Twist rain or uto Pulse rain.16 (8) F 1.77 (45) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. s Ordering Information Port Size 1 1/4 Inch 2 /8 Inch owl Options Polycarbonate owl 1 Twist rain 2 Metal owl Guard / Twist rain N uto Float rain P Metal owl Guard / uto Pulse rain * --- lements 4 Micron 5 Micron Z dsorber Metal owl Twist rain 4 Sight Gauge / Twist rain R uto Float rain T Sight Gauge / uto Pulse rain OL ITMS R MOST POPULR. Pressure Range Without Gauge 1 PSIG 11 6 PSIG PSIG PSIG 14 2 PSIG Requires Metal owl Relief Relieving ngineering Level * Will be ntered at Factory Spring Type by Preset / Limited Pressure: For Preset / Limited Pressure 1 to 25 use PSI Spring For Preset / Limited Pressure 26 to 5 use 6 PSI Spring For Preset / Limited Pressure 51 to 9 use 125 PSI Spring Port Type lank NPT 1* SPP 2 SPT * 1/4 & /8 inch meet ISO Standard. Options lank No Options L Preset Non-djustable P Preset djustable S Pressure Limiter Max. djustable T Pressure Limiter Max. Non-dj. Inlet Pressure is 1 PSIG. For other pressures, contact factory. Preset / Pressure Limited lank None XXX* Preset Pressure XXX* Pressure Limited * vailable Preset / Pressure Limited Range, 1 to 9 PSIG in 5 PSIG increments. For higher pressures, contact factory. (xample: 65 = 65 PSIG) 8

12 atalog 7P- Technical Specifications 27 Technical Information Secondary Pressure - bar 27 Kits & ccessories owl Guard Kit...PS95P owl Kits Poly owl Secondary Pressure - PSIG Flow haracteristics /4 Inch Ports, PSI Spring Primary Pressure 1 PSIG (6.9 bar) Flow - SFM Flow - dm /s n UTION: RGULTOR PRSSUR JUSTMNT The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design. For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting. utomatic Pulse rain...ps995p Twist rain...ps92p Metal owl utomatic Pulse rain...ps997p Twist rain...ps94p Sight Gauge / utomatic Pulse rain...ps996p Sight Gauge / Twist rain...ps95p ontrol Knob...P4421 rain Kit utomatic Pulse rain...ps998p Semi-uto rain...ps511p Twist rain...ps512p Push N rain...ps51p Filter lement Kits 4 Micron...PS91P 5 Micron...PS92P dsorber...ps91p Sight Gauge Kit...PS914P Gauges 1-1/2" ial Face PSIG ( to 2.1 bar)... K4515N14 6 PSIG ( to 4.1 bar)... K4515N PSIG ( to 11. bar)...k4515n1416 PSIG ( to 2. bar)... K4515N14 2" ial Face 6 PSIG ( to 4.1 bar)...k452n PSIG ( to 11. bar)... K452N1416 PSIG ( to 2. bar)...k452n14 Mounting racket Kit (Includes Panel Mount Nut)...PS96P Panel Mount Nut Metal...PS964P Springs 1-15 PSIG Range...P PSIG Range...P PSIG Range...P PSIG Range...P PSIG...P294 Service Kit...PS97P onnet ssembly Kit...PS91P Prep-ir II, 27 Series Secondary Pressure - bar Secondary Pressure - bar Secondary Pressure - PSIG Secondary Pressure - PSIG Flow - dm /s n Flow haracteristics /4 Inch Ports, 125 PSI Spring 9 Primary Pressure 1 PSIG (6.9 bar) Specifications 5 Flow haracteristics /4 Inch Ports, 6 PSI Spring Primary Pressure 1 PSIG (6.9 bar) Flow - SFM Flow - SFM Flow - dm /s n owl apacity...2. Ounces leed Rate SFH Gauge Ports (2)... 1/4 Inch ffect of Supply Pressure Variation.5 PSIG (.4 bar) for 25 PSIG (1.7 bar) change in P 1 Flow apacity scfm (15.6 dm 2 1 PSIG (6.9 bar) P 1 and 2 PSIG (1.4 bar) P 2 Sump apacity....9 Ounce Port Threads... 1/4, /8 Inch Pressure & Temperature Rating Polycarbonate owl to 15 PSIG ( to 1. bar) 2 F to 125 F ( to 52 ) Metal owl to 25 PSIG ( to 17.2 bar) 2 F to 175 F ( to 8 ) utomatic Pulse rain 1 to 15 PSIG (.7 to 1. bar) Relief apacity.5 scfm (.24 dm 2 5 PSIG (.4 bar) increase in P 2 Repeatability...±.14 PSIG (±.97 bar) Response ms The valve will open to full flow and fill a volume of 1 in Weight lb. (.6 kg) Materials of onstruction djusting Stem...Steel ody... Zinc onnet, Internal Parts... Plastic owl Guard...Steel ollar... Plastic iaphragm...nitrile rain... Plastic Filter lements 4 Micron (Standard)... Plastic 5 Micron (Optional)... Plastic dsorber (Optional)...ctivated harcoal Knob... Plastic Poppet...rass Seals...Nitrile Sight Gauge...Polyamide (Nylon) Springs Poppet & ontrol...steel Introduction 27 Series ial s 9

13 atalog 7P- 51R Series Prep-ir II, 51R Series 1/4" asic 1/4" ody 51R Relieving Introduction 27 Series ial s Port Size Standard Pressure 5 to 16 psig (.4 to 11 bar) Features Pressure reference indicating dial face. Non-rising, pressure-adjustment dial. Self-relieving. Full pressure adjustment in less than one full turn. Recommended for pilot-air applications. Flow capacity: 1/4".7 SFM Low Pressure 2 to 4 psig (.14 to bar) 1/4" 51R126R* 51R125R* Standard part numbers shown bold. For other models refer to ordering information below. Inlet pressure 1 psig (6.9 bar). Secondary pressure 9 psig (6.2 bar). H! WRNING H.22 ia. (5.6mm) G J 2.8 (71).4 (1) H 2.2 (56) K 51R imensions Inches (mm) 2.6 (66) 1. () J 1.25 (1.8) 2.6 (66) G 1.56 (9.6) K.18 (4.6) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Ordering Information 51R 1 26 R * Port Size 1 1/4 Inch Springs 25 2 to 4 psig 26 5 to 16 psig Relief R Relieving ngineering Level * Will be ntered at Factory Thread Type lank NPT 1 SPP OL ITMS R MOST POPULR. 1

14 atalog 7P- Technical Specifications 51R Prep-ir II, 51R Series Semi- ial Technical Information 7, 1 Flow haracteristics 51R126R* Secondary Pressure - ar 6, 5, 4,, 2, 1,, Secondary Pressure - PSIG /4 Inch Ports Primary Pressure 1 PSIG (6.9 bar) ir Flow Rate - dm n /s s ial 27 Series Flow - SFM Introduction R Kits & ccessories djustment ial Knob... RRP O-ring, Repair Kit...GRP Piston and onnet Repair Kit... RRP Spring, Regulation, elleville Washer 2 to 4 PSIG (2.8 bar)... RRP to 16 PSIG (11. bar)... RRP Tamper Resistant Kit... RRP Valve, Pilot with O-ring and Valve Spring... RRP Specifications djusting Range Pressure... 2 to 4 PSIG ( to 2.8 bar) 5 to 16 PSIG ( to 11. bar) leed Rate....5 SFM Maximum Operating Temperature F (65.5 ) Maximum Supply Pressure... PSIG (2.7 bar) Port Threads...1/4" Weight...1. lb. (.5 kg) Materials of onstruction ody... Zinc onnet... Zinc / rass Piston... cetal Seals... Nitrile Springs... Steel Valve ssembly...rass / Nitrile / cetal 11

15 atalog 7P- 52R Series Prep-ir II, 52R Series 1/4", /8", 1/2", /4" asic 1/2" ody 52R Relieving Introduction 27 Series ial s Port Size Standard Pressure 5 to 16 psig (.4 to 11 bar) Features alanced poppet design. Non-rising, pressure-adjusting dial. High-relief flow (/16" relief orifice). Two 1/4" gauge ports. Piston operated. Flow capacity: 1/4" 117 SFM /8" 18 SFM 1/2" 195 SFM /4" 22 SFM Low Pressure 2 to 4 psig (.14 to bar) 1/4" 52R126R* 52R125R* /8" 52R226R* 52R225R* 1/2" 52R26R* 52R25R* /4" 52R426R* 52R425R* Standard part numbers shown bold. For other models refer to ordering information below. Inlet pressure 1 PSIG (6.9 bar). Secondary pressure 9 PSIG (6.2 bar). H.22 ia. (5.6mm) H! WRNING G 4.1 (14).95 (24) G 2.7 (69) K.18 (4.6) F L 52R imensions Inches (mm).2 (81) 1.6 (41) H 2.2 (56) L 2.7 (52.6) K J 2.6 (66) F 4. (19) J 2.8 (52.8) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Ordering Information 52R 1 26 R * Port Size 1 1/4 Inch 2 /8 Inch 1/2 Inch 4 /4 Inch Springs 25 2 to 4 PSIG 26 5 to 16 PSIG Relief R Relieving ngineering Level * Will be ntered at Factory Thread Type lank NPT 1 SPP OL ITMS R MOST POPULR. 12

16 atalog 7P- Technical Specifications 52R Prep-ir II, 52R Series Semi- ial Technical Information Secondary Pressure - ar 7, 6, 5, 4,, 2, 1,, Secondary Pressure - PSIG Flow haracteristics 52R126R* 2 1/4 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM Secondary Pressure - ar 7, 6, 5, 4,, 2, 1, Secondary Pressure - PSIG Flow haracteristics 52R226R* /8 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM 7, 6, 5, 4,, 2, 1, /2 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM Introduction 27 Series ial s ir Flow Rate - dm n /s ir Flow Rate - dm n /s Secondary Pressure - ar Secondary Pressure - PSIG Flow haracteristics 52R26R* Secondary Pressure - ar 7, 6, 5, 4,, 2, 1, Secondary Pressure - PSIG Flow haracteristics 52R426R* 25 /4 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM ir Flow Rate - dm n /s ir Flow Rate - dm n /s 52R Kits & ccessories djustment ial Knob... RRP O-ring, Repair Kit...GRP Piston ottom and O-ring Seal... RRP Pistons and onnet Repair Kit... RRP Spring, Regulation, elleville Washer 2 to 4 PSIG Range... RRP to 16 PSIG Range... RRP Tamper Resistant Kit... RRP Valve, Main with U-up Seal & ottom Plug... RRP Valve, Main with U-up Seal... RRP Valve, Pilot with O-ring and Valve Spring... RRP Specifications djusting Range Pressure... 2 to 4 PSIG ( to 2.8 bar) 5 to 16 PSIG ( to 11. bar) leed Rate....5 SFM Gauge Ports... Two Ports 1/4" (an be used as additional High Flow 1/4 Inch Outlet Ports) Maximum Operating Temperature F (65.5 ) Maximum Supply Pressure... PSIG (2.7 bar) Port Threads... 1/4", /8", 1/2", /4" Weight...2. lb. (1.4 kg) Materials of onstruction ody... Zinc onnet... Zinc / rass Piston... cetal Seals... Nitrile Springs... Steel Valve ssembly...rass / Nitrile / cetal 1

17 atalog 7P- 5R Series Prep-ir II, 5R Series /4", 1", 1-1/4" asic 1" ody 5R Relieving Features alanced poppet design. H.22 ia. (5.6mm) N on-rising, pressure-adjusting dial. H High-relief flow (/16" relief orifice). Two 1/4" gauge ports. Piston operated. G Flow capacity: /4" 4 SFM 1" 65 SFM 1-1/4" 7 SFM Introduction 27 Series ial s Port Size Standard Pressure 5 to 16 psig (.4 to 11 bar) Low Pressure 2 to 4 psig (.14 to bar) /4" 5R426R* 5R425R* 1" 5R526R* 5R525R* 1-1/4" 5R626R* 5R625R* Standard part numbers shown bold. For other models refer to ordering information below. Inlet pressure 1 PSIG (6.9 bar). Secondary pressure 8 PSIG (5.5 bar).! WRNING 5.2 (12) 1.7 (4) G. (76) F J 5R imensions Inches (mm) 4. (19) 1.2 (1) H 2.2 (56) 2.6 (66) F 4. (19) J 1.21 () Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Ordering Information 5R 4 26 R * Port Size 4 /4 Inch 5 1 Inch 6 1-1/4 Inch Springs 25 2 to 4 PSIG 26 5 to 16 PSIG Relief R Relieving ngineering Level * Will be ntered at Factory Thread Type lank NPT 1 SPP OL ITMS R MOST POPULR. 14

18 atalog 7P- Technical Specifications 5R Prep-ir II, 5R Series Semi- ial Technical Information Secondary Pressure - ar 7, 6, 5, 4,, 2, 1,, Secondary Pressure - PSIG Flow haracteristics 5R426R* /4 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM Secondary Pressure - ar 7, 6, 5, 4,, 2, 1,, Secondary Pressure - PSIG Flow haracteristics 5R526R* 1 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM Introduction 27 Series ial s ir Flow Rate - dm n /s Secondary Pressure - ar 7, 6, 5, 4,, 2, 1, Secondary Pressure - PSIG Flow haracteristics 5R626R* 1-1/4 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM ir Flow Rate - dm n /s ir Flow Rate - dm n /s 5R Kits & ccessories djustment ial Knob... RRP O-ring, Repair Kit...GRP Piston, ottom and O-ring Seal... RRP Pistons and onnet Repair Kit... RRP Spring, Regulation, elleville Washer 2 to 4 PSIG Range... RRP to 16 PSIG Range... RRP Tamper Resistant Kit... RRP Valve, Main with O-ring Seal... RRP Valve, Pilot with O-ring and Valve Spring... RRP Specifications djusting Range Pressure... 2 to 4 PSIG ( to 2.8 bar) 5 to 16 PSIG ( to 11. bar) leed Rate....5 SFM Gauge Ports... Two Ports 1/4" (an be used as additional High Flow 1/4 Inch Outlet Ports) Maximum Operating Temperature F (65.5 ) Maximum Supply Pressure... PSIG (2.7 bar) Port Threads... /4", 1", 1-1/4" Weight...4. lb. (1.8 kg) Materials of onstruction ody... Zinc onnet... Zinc / rass Piston... cetal Seals... Nitrile Springs... Steel Valve ssembly...rass / Nitrile / cetal 15

19 atalog 7P- 54R Series Prep-ir II, 54R Series 1-1/2", 2" asic 2" ody 54R Relieving Features alanced poppet design. Non-rising, pressure-adjusting dial. High-relief flow (/16" relief orifice). Two 1/4" gauge ports. Piston operated. G Flow capacity: 1-1/2" 1,6 SFM 2" 1,6 SFM Introduction 27 Series ial s Port Size Standard Pressure 5 to 16 psig (.4 to 11 bar) Low Pressure 2 to 4 psig (.14 to bar) 1-1/2" 54R726R* 54R725R* 2" 54R826R* 54R825R* Standard part numbers shown bold. For other models refer to ordering information below. Inlet pressure 1 PSIG (6.9 bar). Secondary pressure 8 PSIG (5.5 bar).! WRNING 6.8 (17) 2.8 (71) G 5. (15) F 54R imensions Inches (mm) 5. (15) 1.15 (29).6 (9) F 1.8 (48) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Ordering Information 54R 7 26 R * Port Size 7 1-1/2 Inch 8 2 Inch Springs 25 2 to 4 PSIG 26 5 to 16 PSIG Relief R Relieving ngineering Level * Will be ntered at Factory Thread Type lank NPT 1 SPP OL ITMS R MOST POPULR. 16

20 atalog 7P- Technical Specifications 54R Prep-ir II, 54R Series Semi- ial Technical Information Secondary Pressure - ar 7, 6, 5, 4,, 2, 1, Secondary Pressure - PSIG Flow haracteristics 54R726R* 1-1/2 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM ir Flow Rate - dm n /s Secondary Pressure - ar 7, 6, 5, 4,, 2, 1, Secondary Pressure - PSIG Flow haracteristics 54R826R* 2 Inch Ports Primary Pressure 1 PSIG (6.9 bar) Flow - SFM ir Flow Rate - dm n /s Introduction 27 Series ial s 54R Kits & ccessories djustment ial Knob... RRP O-ring, Repair Kit...GRP Piston, ottom and O-ring Seal... RRP Pistons and onnet Repair Kit... RRP Spring, Regulation, elleville Washer 2 to 4 PSIG Range... RRP to 16 PSIG Range... RRP Spring, Main Valve... RRP Tamper Resistant Kit... RRP Valve, Main with O-ring Seal... RRP Valve, Pilot with O-ring and Valve Spring... RRP Specifications djusting Range Pressure... 2 to 4 PSIG ( to 2.8 bar) 5 to 16 PSIG ( to 11. bar) leed Rate....5 SFM Gauge Ports... Two Ports 1/4" (an be used as additional High Flow 1/4 Inch Outlet Ports) Maximum Operating Temperature F (65.5 ) Maximum Supply Pressure... PSIG (2.7 bar) Port Threads...1-1/2", 2" Weight...9 lb. (4.1 kg) Materials of onstruction ody... Zinc onnet... Zinc / rass Piston... Zinc Seals... Nitrile Springs... Steel Valve ssembly...rass / Nitrile / cetal 17

21 atalog 7P- PR2 Series 1/4" asic 1/4" ody PR2 High Introduction 27 Series ial s Features ontrol sensitivity of.25" (.6 cm) water column variation allows use in precision applications. compensating diaphragm lets the regulator remain unaffected by supply pressure changes. Flow of up to 4 SFM with 1 PSIG supply allows use in applications with high flow requirements. n aspirator tube compensates downstream pressure droop under flow conditions. separate ontrol hamber isolates the diaphragm from the main flow to eliminate hunting and buzzing. Unit construction lets you service the without removing it from the line. The PR2 is designed for applications that require high capacity and accurate process control in a small package. poppet valve which is balanced by utilizing a convoluted diaphragm, insures a constant output pressure even during wide supply pressure variations. Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the air supply in accordance with the flow velocity. 1-2 UNF-2 (2) Mounting Holes 1/8" NPT Gauge Ports (2) Standard Plunger Operated.12 ia.! WRNING 1 Tamperproof Vent (Keep lear) PR2 imensions 2.25 (57.).81 (96.7) (141.1) Inches (mm) (4.1).25 (6.4) (1.8) 5.22 (12.6) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Ordering Information PR2 4 2 Springs.5 to PSIG 4 1 to 6 PSIG 5 2 to 1 PSIG Pipe Size 2 1/4" NPT Options lank No Options H SPP N Non-Relieving Note: Other Spring Ranges, Port Sizes, and Options vailable. Please onsult Factory OL ITMS R MOST POPULR. 18

22 atalog 7P- Technical Specifications PR2 PR2 Series High Technical Information Output Pressure kpa Output Pressure PSIG Flow haracteristics Model PR2 2~1 PSIG (1.8~69 kpa) Range Supply Pressure = 1 PSIG (69 kpa) Q, SFM Q, LPM iaphragm ssembly Positive ias Spring Supply Valve Inlet Port Outlet Port spirator Tube Inner Valve ssembly Operating Principles The PR2 uses the force balance principal to control the movement of the valve assembly which in turn controls the output pressure. When the regulator is adjusted for a specific set point, the downward force of the Positive ias Spring causes the iaphragm ssembly to move downward. The Supply Valve opens and allows air to pass to the Outlet Port. s the set point is reached, the downward force exerted by the Positive ias spring is balanced by the upward force of the downstream pressure acting on the bottom of the iaphragm ssembly. The resultant force moves the supply Valve upward to reduce the flow of air to the Outlet Port. Outlet pressure is maintained as a result of balance between forces acting on the top and bottom of the iaphragm ssembly. Introduction 27 Series ial s PR2 Kits and ccessories Service Kits 1/2 to, 1 to 6, & 2 to 1 PSIG, Nitrile, Standard... PS /2 to, 1 to 6, & 2 to 1 PSIG, Nitrile, Non-relieving... PS Tamper Resistant Kit... PS1216 Mounting racket Kit...PS417P 2.12 (5).4 (8).62 (91) 2.5 (64).2 (5) 1.24 (1).56 (14).45 (11) 1.88 (47).5 (1).62 (16).22 (6).5 (1) Typ. Specifications Supply Pressure PSIG, (17. bar), (17 kpa) Maximum Flow apacity 4 SFM (68 m 1 PSIG, (7. bar), (7 kpa) Supply and 2 PSIG, (1.5 bar), (15 kpa) Setpoint xhaust apacity 2. SFM (.4 m /HR) where ownstream Pressure is 5 PSIG, (.5 bar), (5 kpa) above 2 PSIG, (1.5 bar), (15 kpa) Setpoint Supply Pressure ffect Less than.2 PSIG, (.14 bar), (.14 kpa) for 1 PSIG, (7. bar), (7 kpa) change in Supply Pressure Sensitivity....25" (.1 PSIG) (.64 cm) Water olumn mbient Temperature...-4 F to +2 F, (-4 to 9 ) Hazardous Locations cceptable for use in Zones 1 and 2 for Gas tmosphere: Groups II and II and Zones 21 and 22 for ust tmospheres Materials of onstruction ody and Housing... luminum iaphragms... Nitrile on acron Trim... rass 19

23 atalog 7P- PR12 Series 1/4" asic /8" ody PR12 High Introduction 27 Series ial s Features ontrol sensitivity of.125" (.2) water column allows use in precision processes. Pressure balanced supply valve prevents supply pressure changes from affecting the setpoint. Optional check valve permits dumping of downstream pressure when supply is opened to atmosphere. Separate control chamber isolates the diaphragm from the main flow to eliminate hunting and buzzing. n aspirator tube compensates downstream pressure droop under flow conditions. The PR12 is designed for applications that require high capacity and accurate process control. poppet valve which is balanced by utilizing a rolling diaphragm, insures a constant output pressure even during wide supply pressure variations. Stability of regulated pressure is maintained under varying flow conditions through the use of an aspirator tube which adjusts the air supply in accordance with the flow velocity. Standard 1/4-2.5" eep (2) Mounting Holes 1/4" NPT Gauge Ports (2) 2 thru 2 PSIG Range 1/4-2.5" eep (2) Mounting Holes 1/4" NPT Gauge Ports (2)! WRNING Plunger Operated.12 ia. Tamperproof & 4 PSIG Range 1 1 PR12 imensions. (76.2) 4.42 (111.9) 6.6 (168.5) Inches (mm) 2.22 (56.5) (121.6) (184.9) (5.9).8 (9.4) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Ordering Information PR Springs.5 to PSIG 4 1 to 6 PSIG 6 2 to 15 PSIG Pipe Size 2 1/4" NPT Options lank No Options H SPP N Non-Relieving Note: Other Spring Ranges, Port Sizes, and Options vailable. Please onsult Factory OL ITMS R MOST POPULR. 2

24 atalog 7P- Technical Specifications PR12 PR12 Series High Technical Information Output Pressure kpa Output Pressure PSIG Flow haracteristics Model PR12 9 PSIG Setpoint (62 kpa) 75 PSIG Setpoint (517 kpa) 6 PSIG Setpoint (414 kpa) 45 PSIG Setpoint (1 kpa) PSIG Setpoint (26 kpa) Supply Pressure = 1 PSIG (69 kpa) Q, SFM Q, LPM PR12 Kits & ccessories Mounting racket Kit Zinc Plated Steel... PS /8 to cl (47.6) of Unit 11/2 (8.7) ia. (2) /4 (19.1) 2-1/4 (57.2) (76.2) 9/16 (14.4) 27/2 (21.6) 7/2 ia. () (5.5) /8 (9.5) 1-7/16 (6.6) 1-1/8 (28.6) Service Kits to 2 PSIG, Relieving... PS to 2 PSIG, Non-relieving... PS Tamper Resistant Kit... PS12165 Supply Valve Inlet Port Inner Valve ssembly Operating Principles The PR12 Series regulator use the force balance principal to control the movement of the Valve ssembly that controls the output pressure. When the regulator is adjusted for a specific set point, the downward force of the Positive ias Spring moves the iaphragm ssembly downward. The Supply Valve opens and allows air to pass to the Outlet Port. s the set point is reached, the downward force exerted by the Positive ias Spring is balanced by the force of the downstream pressure that acts on the iaphragm ssembly. The resultant force moves the Supply Valve upward to reduce the flow of air to the Outlet Port. Outlet pressure is maintained as a result of balance between forces acting on the top and bottom of the iaphragm ssembly. Specifications Gauge Port (2) Supply Pressure... 5 PSIG, (5. bar), (5 kpa) Maximum Flow apacity 4 SFM (68 m 1 PSIG, (7. bar), (7 kpa) Supply and 2 PSIG, (1.5 bar), (15 kpa) Setpoint xhaust apacity 5.5 SFM (9.5 m /HR) where ownstream Pressure is 5 PSIG, (.5 bar), (5 kpa) above 2 PSIG, (1.5 bar), (15 kpa) Setpoint Supply Pressure ffect Less than.1 PSIG, (.7 bar), (.7 kpa) for 1 PSIG, (7. bar), (7 kpa) change in Supply Pressure Sensitivity " (.5 PSIG) (.2 cm) Water olumn mbient Temperature...-4 F to +2 F, (-4 to 9 ) Hazardous Locations cceptable for use in Zones 1 and 2 for Gas tmosphere: Groups II and II and Zones 21 and 22 for ust tmospheres Materials of onstruction Positive ias Spring iaphragm ssembly Outlet Port ody and Housing... luminum iaphragms... una N on acron (Standard Unit Only) Trim...rass, Zinc Plated Steel Introduction 27 Series ial s 21

25 atalog 7P- PR12P Series 1/4" asic /8" ody PR12P High Introduction 27 Series ial s Features ontrol sensitivity of.125" (.2) water column allows use in precision applications. separate ontrol hamber and spirator Tube isolate the diaphragm from the main flow to eliminate hunting and buzzing. Unit construction lets you service the PR12P without removing it from the line. Mounting racket is available. The PR12P is a high capacity relief valve that relieves excess pressure in a pneumatic system. The PR12P provides greater accuracy than standard relief valves over a narrow pressure range. The PR12P is an excellent choice for a wide range of precision applications. 1/4-2.5" eep (2) Mounting Holes Standard 1/4" NPT Gauge Ports (2) 1/4-2.5" eep (2) Mounting Holes 1/4" NPT Gauge Ports (2)! WRNING Tamperproof 2 thru 2 PSIG Range & 4 PSIG Range Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. 1 1 PR12P imensions. (76.2) (115.9) Inches (mm).97 (24.6) 6.1 (16.) 4.19 (16.4) (171.4) Ordering Information PR P Springs.5 to PSIG 4 1 to 6 PSIG 6 2 to 15 PSIG Pipe Size 2 1/4" NPT Options P ack Pressure Options lank No Options H SPP N Non-Relieving Note: Other Spring Ranges, Port Sizes, and Options vailable. Please onsult Factory OL ITMS R MOST POPULR. 22

26 atalog 7P- Technical Specifications PR12P PR12P Series High Technical Information 15 Flow haracteristics Model PR12P 12 PSIG Setpoint (827 kpa) Output Pressure PSIG PSIG Setpoint (62 kpa) 6 PSIG Setpoint (414 kpa) PSIG Setpoint (27 kpa) Flow Rate - SFM PR12P Kits & ccessories Mounting racket Kit Zinc Plated Steel... PS /8 to cl (47.6) of Unit 11/2 (8.7) ia. (2) /4 (19.1) 2-1/4 (57.2) (76.2) 9/16 (14.4) 27/2 (21.6) 7/2 ia. () (5.5) /8 (9.5) 1-7/16 (6.6) 1-1/8 (28.6) Service Kits to 2 PSIG, Standard... PS Tamper Resistant Kit... PS12165 Supply Valve To tmosphere Relief Valve Gauge Port (2) Operating Principles The PR12P uses the force balance principle to open the and vent system pressure when the set point is exceeded. ownstream pressure is transmitted through the spirator Tube to the bottom of the iaphragm ssembly. When you adjust the range screw for a specific set point, the Positive ias Spring compresses and exerts a force on the top of the iaphragm ssembly. s long as the pressure acting on the bottom of the iaphragm ssembly produces a force less than the spring force acting on the top of the iaphragm ssembly, the remains closed. When system pressure increases, the force on the bottom of the iaphragm ssembly increases until it reaches the set point. When system pressure increases beyond the set point, the assembly moves upward, lifting the from its seat and vents the downstream air. If downstream pressure decreases below the set point, the assembly moves downward closing the. Specifications Positive ias Spring iaphragm ssembly System Pressure spirator Tube Set Point Range System Pressure (Maximum) 2-2 PSIG PSIG ( bar) (21. bar) (15-14 kpa) (21 kpa) -4 PSIG 5 PSIG (21-28 bar) (5. bar) (21-28 kpa) (5 kpa) Flow apacity (SFM) 4 (68 m 1 PSIG, (7. bar), (7 kpa) System Pressure Sensitivity " (.5 PSIG) (.2 cm) Water olumn mbient Temperature F to +2 F, (-4 to +9 ) Materials of onstruction ody and Housing... luminum Trim...Zinc Plated Steel, rass Nozzle... Nitrile on acron Introduction 27 Series ial s 2

27 atalog 7P- PR171 Series 1/4", /8" & 1/2" asic /8" ody PR171 High Introduction 27 Series ial s Features ontrol sensitivity of.125" (.2) water column allows use in precision applications. alanced supply valve minimizes effects of vacuum variation. spirator tube compensates for downstream pressure droop under flow conditions. Separate control chamber isolates the diaphragm from the main flow to eliminate hunting and buzzing. onstruction allows servicing without removing from the line. The PR171 is a high accuracy vacuum regulator that provides uniform vacuum regulation independent of vacuum supply changes and flow demand. This unit has a diaphragm assembly with three springs to provide a more balanced loading of the diaphragm. 1/4-2.5" eep (2) Mounting Holes 1/4" NPT Gauge Ports (2)! WRNING Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. PR171 imensions. (76.2) 1. (25.4) Inches (mm) 1.1 (28.7) 5.96 (151.) 4.8 (122.6) Ordering Information PR171 2 N N K N Springs to Hg Pipe Size 2 1/4" NPT Thread Type N NPT Options N Nitrile Options K Knob ssembly Options N Non-Relieving Note: Other Spring Ranges, Port Sizes, and Options vailable. Please onsult Factory OL ITMS R MOST POPULR. 24

28 atalog 7P- PR171 Series PR171 Series High Technical Information Flow haracteristics Model PR171 djusting Knob Output Pressure kpa Output Pressure PSIG PR171 Kits and ccessories Mounting racket... PS /8 to cl (47.6) of Unit 11/2 (8.7) ia. (2) /4 (19.1) Q, SFM Q, LPM 7/2 ia. () (5.5) /8 (9.5) 2-1/4 (57.2) (76.2) 9/16 (14.4) 27/2 (21.6) 1-7/16 (6.6) 1-1/8 (28.6) iaphragm ssembly ontrol hamber Supply Valve Supply Range Springs Outlet hamber Operating Principles The Model PR171 Series vacuum regulator uses the force balance principle to control the movement of the Valve ssembly that controls output vacuum. When the regulator is adjusted for a specific set point, the upward force of the Range Springs moves the iaphragm ssembly upward. The Supply Valve opens and allows air to pass to the inlet port. s the set point is reached, the upward force exerted by the Range Springs is balanced by the force of the vacuum that pulls downward on the iaphragm ssembly. The resultant force moves the Supply Valve downward to reduce the flow of air to the inlet port. Outlet vacuum is maintained as a result of balance between forces acting on the top and bottom of the iaphragm ssembly. Specifications Supply (Max) Hg (76 torr) Flow apacity torr Supply, 25 torr Setpoint Sensitivity " (.5 PSIG) (.2 cm) Water olumn mbient Temperature F to +2 F, (-4 to +9 ) Supply ffect Less than 1 torr for 1 torr (.4 Hg for.94 Hg) hange in Supply Materials of onstruction ody and Housing... luminum Trim...Zinc Plated Steel, rass lastomers... Nitrile Introduction 27 Series ial s Service Kits (Includes iaphragm ssy, Valve ssy, Seat ssy & Gasket) -" Hg, Nitrile, Non-relieving... PS Tamper Resistant Kit... PS

29 atalog 7P- P62 Series 1/4" asic 1/4" ody P62 Features The no-brass construction is well suited to harsh environments. Introduction 27 Series ial s Internal and external epoxy finish for superior corrosion resistance. Non-bleed design to reduce consumption. Integral. F Gauge Port provides convenient pressure gauge mounting. The standard 5-micron filter minimizes internal contamination. The Filter ripwell contains a rain Plug to easily drain trapped liquids. Standard Tapped xhaust. Soft Relief Seat minimizes air loss.! WRNING P62 imensions 2.8 (71.9) 2.96 (75) Inches (mm) 2.25 (57.2) 7.52 (1916) 7.88 (2) F 8.19 (29) Product rupture can cause serious injury. o not connect regulator to bottled gas. o not exceed maximum primary pressure rating. Ordering Information P N S Springs 4 1 to 6 PSIG 5 2 to 12 PSIG Pipe Size 2 1/4" NPT Thread Type N NPT U SPP djustment S Screw (Std.) K Knob T Tamperproof Options lank None Note: Other Spring Ranges, Port Sizes, and Options vailable. Please onsult Factory OL ITMS R MOST POPULR. 26

30 atalog 7P- P62 Series P62 Series Technical Information 14 Flow haracteristics Model P62 Supply Pressure = 15 PSIG onnet 12 iaphragm ssembly Output Pressure PSIG PSIG Setpoint (62 kpa) 75 PSIG Setpoint (517 kpa) 6 PSIG Setpoint (414 kpa) 45 PSIG Setpoint (1 kpa) ody 2 PSIG Setpoint (26 kpa) ripwell ssembly ir Flow - SFM rain ock Operating Principles When you turn the djustment Screw to a specific setpoint, the Spring exerts a downward force against the top of the iaphragm ssembly. This downward force opens the Supply Valve. Output pressure flows through the Outlet Port and the passage to the ontrol hamber where it creates an upward force on the bottom of the iaphragm ssembly. When the setpoint is reached, the force of the Spring that acts on the top of the iaphragm ssembly balances with the force of output pressure that acts on the bottom of the iaphragm ssembly and closes the Supply Valve. When the output pressure increases above the setpoint, the iaphragm ssembly moves upward to close the Supply Valve and open the xhaust Valve. Output pressure flows through the xhaust Valve and out of the xhaust Vent on the side of the unit until it reaches the setpoint. Introduction 27 Series ial s P62 Kits & ccessories Service Kits 1 to 6, 2 to 12 PSIG... PS19968-NR Tamper Resistant Kit... PS12165 Specifications Supply Pressure PSIG, (17 bar), (17 kpa) Maximum Flow apacity (SFM) (42.5 m 1 PSIG, (7 bar), (7 kpa) supply and 2 PSIG, (1.5 bar), (15 kpa) setpoint xhaust apacity (SFM)....8 (1.6 m /HR) where d ownstream pressure is 5 PSIG, (.5 bar), (5 kpa) above 2 PSIG, (1.5 bar), (15 kpa) setpoint. (.8 SFM for 12 # unit) Maximum Supply Pressure PSIG, (14 bar), (14 kpa) onsumption...undetectable Supply Pressure ffect... Less than 1.25 PSIG, (.9 bar), (9 kpa) change for 1 PSIG, (7. bar), (7 kpa) change in supply pressure (1.9 PSIG for 12 # unit) Sensitivity...1." (.6 PSIG) (2.54 cm) Water olumn Temperature Range o F to + 16 o F, (-4 o to + 71 o ) Materials of onstruction ody and Housing...poxy oated luminum Trim... Stainless Steel, Nickel Plated Steel lastomers...nitrile 27

31 atalog 7P- P28 Series Pneumatic 1/4" asic 1/4" ody P28 Pneumatic Introduction 27 Series ial Features The P28 uses a pneumatic input signal to accurately control output pressure based on a predetermined ratio. balanced Supply Valve minimizes the effects of supply pressure variation. n spirator Tube compensates downstream pressure droop under flowing conditions. separate ontrol hamber isolates the diaphragm from the main flow to eliminate hunting and buzzing. Unit construction allows servicing without removal. Mounting racket available. 1:1, 1:2, 1:, 2:1 & :1 Ratios 1/4" NPT Tapped xhaust 1:1, 1:2, 1:, 2:1 & :1 Ratios Only for Ratios 1:1, 1:2, 1:, 2:1 & :1 1/4" NPT Inlet Port (Typical) 1 1/4" NPT Gage Port (Typical) 1/4" NPT Signal Port y-pass Valve 1:1 Ratio Only 1:4, 1:5, 1:6, 4:1 & 5:1 Ratios 1 for Ratios 1:4, 1:5, 1:6, 4:1 & 5:1 1 1/4" NPT Outlet Port (Typical) P28 imensions. (76.2) 1.94 (2.8) (19.5) Inches (mm).94 (2.8).1 (.2) 2.1 (5.9).88 (98.) s Ordering Information P Pilot Ratio 1 1:1 2 1:2 1: Pipe Size 2 1/4" NPT Options lank No Options Tapped xhaust H SPP I y-pass Valve Note: Other Spring Ranges, Port Sizes, and Options vailable. Please onsult Factory OL ITMS R MOST POPULR. 28

R10 / R11 General Purpose Regulators

R10 / R11 General Purpose Regulators N T 4 7 9 atalog -2 R / R Series (Revised -7-8) General Purpose Regulators /4, /8 & /2 Inch Ports R / R General Purpose Regulators Features High Flow Performance Featuring Rugged esign for the Most emanding

More information

Filter / Regulator Numbering System

Filter / Regulator Numbering System atalog 9M-TK-19- Filter / Regulator Numbering System Filter / Regulator Numbering System Unit Thread Pipe Preset / Function Family Type Size Options Options Options Options Pressure Limited 2 Unit Function

More information

IP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators

IP2, IP2A and IP2D. Spirax-Monnier International Compressed Air Filter/ Regulators Page 1 of 6 TI-P510-01 H Issue 5 IP2, IP2 and IP2D ISO 9001 Spirax-Monnier International ompressed ir Filter/ Regulators ert. No. LRQ 0963008 Description The IP range of Spirax-Monnier international compressed

More information

IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators

IP2M, IP2AM and IP2DM Monnier International Compressed Air Filter/ Regulators L ocal regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification

More information

Prep-Air II. Miniature FRL Series. Catalogue: PDE2591TCUK-ca Edition: May 2007

Prep-Air II. Miniature FRL Series. Catalogue: PDE2591TCUK-ca Edition: May 2007 Prep-ir II atalogue: P259TUK-ca dition: May 27 P259TUK-ca Important! efore carrying out any service work, ensure that the valve and manifold have been vented. Remove the primary supply air hose to ensure

More information

1200 Series Pressure Regulators

1200 Series Pressure Regulators SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of

More information

PRO-50 Instrument Supply Regulator

PRO-50 Instrument Supply Regulator Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits

More information

ALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data

ALE-32. Miniature General Purpose Regulators R07, R46 (non-repairable) Air line equipment. Technical data ir line equipment Miniature eneral Purpose egulators 7, (non-repairable) 7 Full flow gauge ports Snap action knob locks pressure setting when pushed in Standard relieving models allow reduction of outlet

More information

Model 10. Low-Medium Pressure Reducing Regulator

Model 10. Low-Medium Pressure Reducing Regulator Model 10 Low-Medium Pressure Reducing Regulator General Specifications & Performance Characteristics The Model 10 is a pressure reducing regulator useful in a wide variety of applications. The Model 10

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

Description Supply pressure Pressure range Connection Device Page max. bar bar thread

Description Supply pressure Pressure range Connection Device Page max. bar bar thread Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4

More information

lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0

lternative odels 3.87 (98) anual Drain 2.67 (68) 3.72 (94) utomatic Drain 2.13 (54) 1.12 (28) P1H, PTH Filter/Regulator-Lubricator Combination Units 0 ir line equipment P1H, PTH Filter/Regulator- Lubricator Combination Units 07 Series Compact design Filter removes liquids and solid particles down to 5 µm Push to lock adjusting knob with tamper resistant

More information

High Precision Regulators R210 / R220 / R230 Series

High Precision Regulators R210 / R220 / R230 Series High Precision Regulators R210 / R220 / R230 Series Catalogue no. PDE2542TCUK-ca WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN

More information

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK

More information

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K

Regulator. Modular Type AR10 AR20 AR25 AR30 AR40 AR40-06 AR50 AR60. Pages 36 through 40 AR20K AR25K AR30K AR40K AR40K-06 AR50K AR60K Modular Type Regulator Series R Regulator Series R Model R M5 x.8 ccessory R2 /8, /4 R /4, 3/8 R3 /4, 3/8 R4 /4, 3/8, /2 Pages 36 through 4 Regulator with back flow mechanism Series RK R4-6 R5 R6 R2K RK,

More information

Cash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified

Cash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot

More information

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for Excavators Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

More information

Model AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K

Model AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424

More information

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8 and 1/4 PTF Port Sizes. Air line equipment. Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure

More information

Precision Pressure Regulators

Precision Pressure Regulators hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without

More information

CASH VALVE TYPE KP BACK PRESSURE VALVES

CASH VALVE TYPE KP BACK PRESSURE VALVES A high capacity pilot operated back pressure valve that offers accurate control and dependable protection against overpressure conditions FEATURES Automatically maintains maximum pressure in a vessel or

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note

More information

Full Range Pressure Compensating Variable Flow Control

Full Range Pressure Compensating Variable Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever

More information

Power Valve: Precision Regulator. High precision, large capacity relief regulator

Power Valve: Precision Regulator. High precision, large capacity relief regulator Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air

More information

MEGR-1912 Instruction Manual

MEGR-1912 Instruction Manual MEGR-1912 PRESSURE REGULATOR Instruction Manual- Look Inside For: Description Installation Start-Up Maintenance Parts Ordering Parts List Marshall Excelsior Company Marshall, MI 49068 269-789-6700 FAX

More information

Pressure Regulators. Operating Instructions. Instrumentation

Pressure Regulators. Operating Instructions. Instrumentation Pressure Regulators Operating Instructions FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THIS PRODUCT CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from the

More information

Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)

Logic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm) Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min

More information

SUPER PRECISION AIR RELAYS

SUPER PRECISION AIR RELAYS CAT. No. KS-128E SUPER PRECISION AIR REGULATOR rsseries SUPER PRECISION AIR REGULATORS rr SERIES SUPER PRECISION AIR RELAYS Air Pressure Regulators that attain the ultimate in pressure control. S/R R SUPER

More information

Electropneumatic Transducer (I/P) Installation, Operation and

Electropneumatic Transducer (I/P) Installation, Operation and Nitra NCP1 Series Electropneumatic Transducer (I/P) Installation, Operation and Maintenance Instructions Ordering Information Contents Part Number I/P Transducers Output Range Input psig bar Section Description

More information

High precision pressure regulators G1/4" R210 / R220 / R230 Series

High precision pressure regulators G1/4 R210 / R220 / R230 Series R210 - R230 High precision pressure regulators G1/4" High Precision Pressure Regulators R210 / R220 / R230 Series FLUIDTECHNIK BOHEMIA s. r. o. Olomoucká 87 tel : 548 213 233-235 CZ-627 00 Brno fax : 548

More information

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves. Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing

More information

TECHNICAL DATA. Page 1 of 12

TECHNICAL DATA. Page 1 of 12 Page 1 of 12 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking Model H or J Flow Control

More information

Installation and User Manual

Installation and User Manual 49124589 Revision A August 2015 PacE Flow Controller Installation and User Manual Save These Instructions Table of contents Table of contents..................................................... 2 INSTALLATION............................................................3

More information

1800C & 1800C-HC Service Regulators

1800C & 1800C-HC Service Regulators SB-855.8 800 & 800-H Service Regulators Maximum Pressure 5 PSIG 800 Regulator Information General Information The merican Meter Series 800 pressure regulators are designed for natural gas applications

More information

Precision Pressure Regulators. Precision Fluidics

Precision Pressure Regulators. Precision Fluidics Precision Pressure Regulators Precision Fluidics This is increased efficiency. Precision low flow carrier gas control for gas chromatography. Parker precision regulators, valves and controllers are designed

More information

1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG

1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG A C E D SB-8520.2 1800CPB2 Service Regulators Maximum Inlet 125 PSIG AMC Quality System QMI is Accredited by: C R E D I T ISO 9001 Certified Certificate #006697 R E ANSI RAB G I S T R A R Dutch Council

More information

TECHNICAL DATA. Pressure Regulation 531a. April 24, 2009

TECHNICAL DATA. Pressure Regulation 531a. April 24, 2009 April 24, 29 Pressure Regulation 531a 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking

More information

VACUUM REGULATORS CONTENTS

VACUUM REGULATORS CONTENTS CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate

More information

1800CPB2 Pilot-Loaded Service Regulators

1800CPB2 Pilot-Loaded Service Regulators 1800CPB2 Pilot-Loaded Service Regulators Technical Bulletin www.elster-americanmeter.com Table of Contents 1800CPB2 Regulator Information................ 2-3 1800CPB2 Capacity Performance................

More information

627 Series Pressure Reducing Regulators

627 Series Pressure Reducing Regulators 627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural

More information

RegO Adapters, Connector, & Fittings

RegO Adapters, Connector, & Fittings RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of

More information

Description Pressure range Connection thread Device Page

Description Pressure range Connection thread Device Page Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4

More information

1800CPB2 Service Regulators

1800CPB2 Service Regulators SB 8520.5 1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG Table of Contents 1800CPB2 Regulator Information................ 2-3 1800CPB2 Capacity Performance................ 4-6 1-1/4" Models,

More information

SUPER PRECISION AIR RELAYS

SUPER PRECISION AIR RELAYS CAT. No. KS-128E SUPER PRECISION AIR REGULATOR rsseries SUPER PRECISION AIR REGULATORS rrseries SUPER PRECISION AIR RELAYS Air Pressure Regulators that attain the ultimate in pressure control. SUPER PRECISION

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

Industrial Regulator Series 1800/2000

Industrial Regulator Series 1800/2000 E S 85. Industrial Regulator Series / M Quality System QMI is ccredited by: R E I T ISO 9 ertified R E NSI R G I S T R R utch ouncil for ccreditation Measurement Engineers Since 86 merican Meter Series

More information

Volume Booster. Volume Booster Description Supply pressure Pressure range Connection Device Page max. bar bar thread

Volume Booster. Volume Booster Description Supply pressure Pressure range Connection Device Page max. bar bar thread Volume ooster Supply pressure Pressure range onnection Device Page max. bar bar thread precise differential pressure also 17 0 1 / 10 and G 3 8 R50.02 differential pressure also 10 0.2 1 / 8 ¼ NPT 53.19

More information

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note

More information

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2

Regulator: Modular Type with Back flow Mechanism. AR30K to 60K. Body size. Port size 1/4 3/8 1/2 3/4 AR40 AR50 3/4 1/2 Regulator: Modular Type with ack flow Mechanism R3 to 6 How to Order Regulator with a built-in mechanism that ensures a quick release of the outlet air pressure (built-in check valve with back flow mechanism).

More information

Standard Operating and Maintenance Instructions for Pumping System Model PS-90

Standard Operating and Maintenance Instructions for Pumping System Model PS-90 Standard Operating and Maintenance Instructions for Pumping System Model PS-90 High Pressure Equipment Company 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075

More information

Model 4000 Pressure Controller

Model 4000 Pressure Controller FEATURES Multiple Configurations The 4000 series pressure controller can be configured into either proportional only or proportional plus reset mode with a minimum of parts. Rugged Design Die cast aluminum

More information

Type Cronos Pressure Reducing Regulator

Type Cronos Pressure Reducing Regulator Type Cronos Pressure Reducing Regulator March 2002 E0838 Figure 1. Type Cronos Regulator Features! Control ccuracy Keeps constant inlet pressures to downstream equipment by accurately controlling system

More information

Float Operated Level Controllers

Float Operated Level Controllers CONTENTS Float Operated Level Controllers IM0015 Nov. 2014 PAGE Introduction 1 Scope 1 Description 1 Specification 1 Control Installation 2 INTRODUCTION Side Mount Back Mount Prior to installing, the instructions

More information

Binks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)

Binks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator) INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete

More information

TECHNICAL DATA CAUTION

TECHNICAL DATA CAUTION Page 1 of 12 1. DESCRIPTION The Viking Model C-2 Pilot Pressure Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking

More information

OPERATING AND MAINTENANCE MANUAL

OPERATING AND MAINTENANCE MANUAL Series 4300 Engineered Performance TABLE OF CONTENTS 0 INTRODUCTION 1 1 Scope 1 2 Description 1 3 Specifications 1 0 INSTALLATION 1 1 Mounting 1 2 Piping 1 1 Connecting Process Pressure 2 2 Vent Connections

More information

IFP C175-* REMOTE CONTROL RELIEF VALVE

IFP C175-* REMOTE CONTROL RELIEF VALVE IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)

More information

SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation. Size: inch / mm

SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation. Size: inch / mm SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation Size: inch / mm Every Ross Valve shall be hydrostatically tested for body integrity and tight seating

More information

Type 299 Pressure Reducing Regulators

Type 299 Pressure Reducing Regulators Type 299 Pressure Reducing Regulators Fisher, Fisher-Rosemount, and Managing The Process Better are marks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems, Inc. All other marks

More information

Direct Operated Precision Regulator Modular Style. Standard Specifications

Direct Operated Precision Regulator Modular Style. Standard Specifications 1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com

More information

Welker Sampler. Model GSS-1. Installation, Operation, and Maintenance Manual

Welker Sampler. Model GSS-1. Installation, Operation, and Maintenance Manual Installation, Operation, and Maintenance Manual Welker Sampler Model GSS-1 The information in this manual has been carefully checked for accuracy and is intended to be used as a guide to operations. Correct

More information

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US Industrial Hydraulic Valves Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-2500/US Industrial Hydraulic Valves WARNING USR RSPONSIBILITY FAILUR OR IMPROPR

More information

Pressure and/or Temperature Pilot Operated Steam Regulators Series 2000

Pressure and/or Temperature Pilot Operated Steam Regulators Series 2000 Hoffman Specialty Regulators Regulators Pressure and/or Temperature Operated Regulators Series 2000 The Hoffman Specialty Series 2000 consists of main valves, pilot valves, wells and hardware kits. They

More information

VALVCHEQ BACKFLOW PREVENTERS FIGURE RP03

VALVCHEQ BACKFLOW PREVENTERS FIGURE RP03 Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections FEATURES GENERAL APPLICATION The RP03 provides protection from both backsiphonage and backpressure

More information

SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION

SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds

More information

Pilot Operated Safety Relief Valves For Liquified Gas Carriers

Pilot Operated Safety Relief Valves For Liquified Gas Carriers Pilot Operated Safety Relief Valves For Liquified Gas Carriers LUCET Features and dvantages High seat tightness - s the force that holds the disc on the nozzle increases with the pressure, the valve remains

More information

Tank Blanketing Pressure Regulators RHPS Series

Tank Blanketing Pressure Regulators RHPS Series www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22

More information

Bulletin 2533-M3/USA Service Bulletin. Series PR25MA, PR25P, PR25S, PR32P, PR32S. Effective: July 1, Pilot Operated Pressure Reducing Valves

Bulletin 2533-M3/USA Service Bulletin. Series PR25MA, PR25P, PR25S, PR32P, PR32S. Effective: July 1, Pilot Operated Pressure Reducing Valves Service Bulletin Series PR25MA, PR25P, PR25S, PR32P, PR32S Effective: July 1, 1995 Pilot Operated Pressure Reducing Valves WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS

More information

Series ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge

Series ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on

More information

RD(H)20/25 Pressure-Reducing Regulator User Manual

RD(H)20/25 Pressure-Reducing Regulator User Manual RD(H)20/25 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is

More information

SO 9001 I ACCESSORIES

SO 9001 I ACCESSORIES ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2

More information

INSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator

INSTRUCTION MANUAL. CVS P37 LP Gas Reducing Regulator INSTRUCTION MANUAL CVS P37 LP Gas Reducing Regulator The CVS Controls P37 Regulator is a non-relieving, pressure reducing regulator suitable for use in LP gas applications (Natural Gas and Propane). As

More information

EXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4

EXCELON QUIKCLAMP SYSTEM Pressure relief valves V72G, V74G - G1/4... G 3/4 V7 V7 EXCELO QUIKCLMP SYSTEM Pressure relief valves V7, V7-1/... 3/ Excelon design allows in-line installation or modular installation with other Excelon products Push to lock adjusting knob with tamper

More information

Anti-flood device Model B-1

Anti-flood device Model B-1 December 4, 2009 Dry Systems 123a 1. DESCRIPTION The Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET

More information

BACK PRESSURE / SUSTAINING

BACK PRESSURE / SUSTAINING In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. This is the function of the 108 Pressure Relief / Back Pressure Series of the OCV control valves.

More information

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator. RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to

More information

General. Rugged, Reliable with Value-added Features. Pipe Sizes. Temperature Limits. Spring Ranges. Buried Service. Increased Outlet Pipe Sizes

General. Rugged, Reliable with Value-added Features. Pipe Sizes. Temperature Limits. Spring Ranges. Buried Service. Increased Outlet Pipe Sizes DS-G-REG-13-43-0812-01-A* Model 243-RPC Pilot Operated Regulators Installation and Maintenance Instructions Rugged, Reliable with Value-added Features Genuine, pilot-operated regulators use the same relay

More information

BACK PRESSURE / SUSTAINING

BACK PRESSURE / SUSTAINING SPECIFICATIONS DIMENSIONS In many liquid piping systems, it is vital that line pressure is maintained within relatively narrow limits. This is the function of the 108 Pressure Relief / Back Pressure Series

More information

Model PRS-07i. Stainless Steel Low Pressure, In-Line Pressure Regulator (Reducing Valve)

Model PRS-07i. Stainless Steel Low Pressure, In-Line Pressure Regulator (Reducing Valve) Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-07i Stainless Steel Low Pressure, In-Line Pressure

More information

Liquid Level Controls

Liquid Level Controls Series RS High Pressure Sensors & Probes For onductance ctuated ontrols Series RS Sensors Series-RS-X-BR-: NM 4X nclosure For sophisticated multi-level control in tanks, boilers and hydronic systems Remote

More information

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is

More information

Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP

Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Model No. 80-651 Rotary Agitator INTRODUCTION Binks SG-2 TM Plus Rotary 2 Qt. Pressure Cup is ideal for component spraying and industrial applications where

More information

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.

Components for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly. Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using

More information

TECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY

TECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY Page 1 of 13 1. DESCRIPTION The Viking 3 Model G-3000 Dry Valve Riser Assembly is equipped with a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry

More information

FUNDAMENTALS OF PRESSURE REGULATORS ROBERT BENNETT MANAGER OF TRAINING ELSTER AMERICAN METER

FUNDAMENTALS OF PRESSURE REGULATORS ROBERT BENNETT MANAGER OF TRAINING ELSTER AMERICAN METER FUNDAMENTALS OF PRESSURE REGULATORS ROBERT BENNETT MANAGER OF TRAINING ELSTER AMERICAN METER SUPPLY = DEMAND FUNCTION OF A REGULATOR A regulator may be defined as a "mechanism for controlling or governing

More information

LRS(H)4 Pressure-Reducing Regulator User Manual

LRS(H)4 Pressure-Reducing Regulator User Manual LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered

More information

CASH VALVE CRYOGENIC CONTROLS

CASH VALVE CRYOGENIC CONTROLS SH VLVE ryogenic control for pressure build regulators, pressure reducing valves, final line gas valves and combination pressure build economizer valves. Description ryogenics the science of materials

More information

Pressure Reducing Control Valve w/ Hydraulic Check Feature

Pressure Reducing Control Valve w/ Hydraulic Check Feature PERTIN INSTRUTINS peration The BEE Model PR- Pressure Reducing ontrol alve with Hydraulic heck eature is a pilot controlled diaphragm valve designed to reduce a fluctuating higher upstream pressure to

More information

EASTERN ENERGY SERVICES PTE LTD. 60 Kaki Bukit Place #02-19 Eunos Tech Park Singapore, SG Singapore Telephone: Fax:

EASTERN ENERGY SERVICES PTE LTD. 60 Kaki Bukit Place #02-19 Eunos Tech Park Singapore, SG Singapore Telephone: Fax: 2 Table Of Contents 1. Introduction 3 2. About this Manual 3 3. Contacting YZ Systems 3 4. Vessel Components 4 5. Specifications 5 6. Application 6 7. Theory of Operation 7 8. DuraSite Installation & Use

More information

64 Series Pressure Reducing Regulators

64 Series Pressure Reducing Regulators Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,

More information

P33 Safety Exhaust Valve Externally Monitored. Bulletin 0700-B14 ENGINEERING YOUR SUCCESS.

P33 Safety Exhaust Valve Externally Monitored. Bulletin 0700-B14 ENGINEERING YOUR SUCCESS. P Externally Monitored ulletin 07004 ENGINEERING YOUR SUESS. Features Externally Monitored Function When applications demand a safe environment you can count on safety valves from Parker Hannifin. The

More information

Air service units series K G1/8, G1/4

Air service units series K G1/8, G1/4 Air service units series K Series FK Filter 12.011 Series RK Pressure regulator 12.012 Series FRK Filter/regulator 12.013 Series OK Lubricator 12.014 Series FROK Two piece air service unit 12.015 Series

More information

B84G - Excelon Plus Modular System General purpose filter/regulator

B84G - Excelon Plus Modular System General purpose filter/regulator > Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant

More information

TECHNICAL DATA ANTI-FLOOD DEVICE MODEL B-1 1. DESCRIPTION

TECHNICAL DATA ANTI-FLOOD DEVICE MODEL B-1 1. DESCRIPTION Page 1 of 6 1. DESCRIPTION The Model B-1 Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET condition,

More information

Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections

Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections Reduce pressure zone device suitable for high and medium hazard rated applications BSP screwed connections Features General application The RP03 provides protection from both backsiphonage and backpressure

More information

Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002

Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002 Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact

More information

SERIES 30. Spring Operated Tank Blanketing Valve PROTECTOSEAL.

SERIES 30. Spring Operated Tank Blanketing Valve PROTECTOSEAL. SERIES 30 PROTECTOSEAL 1 2" NPT inlet and outlet standard Direct acting valve mechanism Optional flanged or threaded inlet and outlet connections available Inlet gas pressures from 10 PSIG to 200 PSIG

More information

Model 1800 PFM Series Regulator. Technical Bulletin

Model 1800 PFM Series Regulator. Technical Bulletin Model 0 PFM Series Regulator Technical Bulletin Model 0 PFM Series Regulator 0 Elster American Meter The 0 PFM Series regulators are designed to control natural gas, air, nitrogen, carbon dioxide, propane

More information