Compresso Connect F INSTALL
|
|
- Harry Hensley
- 6 years ago
- Views:
Transcription
1 en de fr nl SAFETY INSPECTION DISASSEMBLING prescriptions SAFETY INSPECTION Personnel Installing and operating personnel must possess the appropriate knowledge and training. Follow the instructions Installation, operation, maintenance and disassembly must be carried out as stated and showed in the different instruction manuals making integral part of the delivery and in accordance with best practice. If anything is unclear, please contact IMI Hydronic Engineering customer service. Tests for commissioning and periodic inspections Test required for commissioning and periodic inspections must be performed according to the regulations in the country where the device is installed and operated. There are no unified international regulations for the acceptance test prior to commissioning and periodic inspections. It is usually the vessels that determine how the installation is classified. These are CE type-tested in accordance with guideline PED/DEP/97/3/EC for pressurised equipments. For periodic inspections, openings are provided for flange-type or endoscope inspections. In Switzerland, Compresso does not require autorisation from the SVTI if the installation is protected in such a way that psch is not exceeded. Vessels with psv x V up to 3000 bar*litres do not require inspection by the SVTI. Following combinations with TecBox are recommended: Primary vessel () TecBox safety valve (SV) C 10 C litres 3 bar on request 800 litres 3.75 bar on request 700 litres 4. bar on request 600 litres 5 bar on request 500 litres 6 bar 6 bar 300 litres 10 bar For Transfero as many extension vessels as required can be connected to the primary vessel. The CE-approved bar safety valve protects the vessels from inadmissible pressures. In Switzerland, SVTI inspection is not required for these types of vessels. Place of installation The access to the place of installation must be restricted to trained and specialised personnel. The floor statics must be able to support the maximum operating and installation conditions. Connections for electricity, communication, main water and waste water must correspond to the requirements of the device. The room must be thouroughly ventilated. Water quality IMI Hydronic Engineering devices are designed to maintain pressure, to degass or to make-up and/or treat water in closed heating, solar and cooling systems with water that contains no aggressive or toxic agents.the entire system must be dimensioned and operated in such a way as to minimise the amount of oxygen admitted through the make-up water or through permeable components. Water treatment systems are to be dimensioned, installed and operated according to the current state of the art. Electrical connection The electrical and the communication wiring and connections should be carried out by a qualified electrician, in accordance with current local regulations. The devices and the potential free outputs must be disconnected from the electrical supply before working on electrical components. Protection on the supply to be done by the contractor: Compresso C10.1; C15; CX: 10 A Compresso C10.; C15.: 16 A Transfero range 4;6;8;10 = 1 x 30 V: 16 A Transfero TPV...P = 3 x 400 V: 10 A Vento range,3,4,6,8,10 = 1 x 30V: 16 A Vento range 13,19 = 3 x 400 V: 10 A Pleno PI9.1; PI6.1: 10 A PI6.: 16 A Residual current device (RCD) following local regulation. If installed in residential building we recommend a commercially available line filter to the junction box. WCMOIN Compresso Connect F INSTALL Compresso Transfero Vento PlenoI
2 The texts, graphics and diagrams in this document may be subject to alteration without prior notice or reason being given. TecBox Compresso CU Compresso CG x3 x5 AVV DLV CDVV CDVV LT LT
3 DLV 600 mm 0% OK 0% Hygro 80% 100% +5 C C 0% - 80% 1x30V Cl : < 60 mg/m²/4h 150 mm 3
4 Compresso CU Compresso CG 3 ACV 4 ACV 3 CDVV CDVV 1 1 4
5 DNe SVS DNe DNe DNe IMI Hydronic Engineering DNe 30 m DNe EN 188 Q kw SWKI 93-1 * Q kw ts max 50 C Q kw *) CH 5
6 TecBox SA1 SVV SF1 V1 PT 1 x3 CLICK! 6
7 3 x5 4 7
8 x CU / CG CUE / CGE 8
9 30V/50/60 Hz 10A / 3 x 1,0 mm #1-5 1 L 1! PE N 3 4 L PE N 5 6 BrainCube Connect! 9
10 30V/50/60 Hz Sicherung/ fusible/ fuse 10 A / 50V / 5x0 F00 Klemmen Ausführung C.1 Version des bornes C.1 Terminal execution C.1 30 V 50/60 Hz LINE P/C1 V1 V3 V4 WM V P/C OD1OD OD3 OD4 L N PE L N PE L N PE L N PE Achtung: Fremdspannung BN BU GNYE BN BU GNYE BN BU GNYE BN BU GNYE Attention: tension externe Attention: external voltage G erätestecker Fiche Main plug 16 A M 1 ~ C NO C NO C NO *A *A max. A Leitungsabsicherung bauseits Protection de la ligne max. A par l `installateur max. A line protection by c ontractor Netzversorgung P1 V1 Alimentation K ompressor Ü berströmv entil electrique Compresseur Network supply C ompressor V anne de 30V/50/60 Hz decharge 10A / 3 x 1,0 mm² Spill valve WM Nachspeisev entil V anne d`appoint d`eau Water make up valve Meldungen Gebäudeleittechnik Programmierbar, Zuordnung nach Menü Parameter Report de messagevers la GTC, affection siuvant menu-parametres B uilding control reports, allocation acc. to menu-parameter 4V Klemmen Ausführung C.1/C. Version des bornes C.1/C. Terminal execution C.1/C. SELV IA5 IA4 IA3 IA IA1 ID4 ID3 ID ID1 OA OA1 IDA IDA1 GND IN + GND IN + GND IN GND IN SHIELD WH PE BN GN BN 1 1 OUT + PE OUT p P P S ensor Gefässinhalt LT C apteur de n iveau LT Level sensor LT S ensor Anlagendruck PT C apteur de pression PT Pressure s ensor PT TAZ+ PAZ- Grenzwertschalter C ontacteur de seuil Limit switch Jumper (RS485) off = Offen / stationne / open on = Gesteckt / branche / connect ID6 ID5 IDA3 RS 485 IN OUT A B S A B S SHIELD SHIELD GND IN GND IN GND IN + LAN / Ethernet A B S A B S RS458 USB 10
11 11
12 We reserve the right to introduce technical alterations without previous notice.
Compresso Connect C10.1 / C15.1 / C10.2 / C15.2 INSTALL
SAFETY INSPECTION DISASSEMBLING prescriptions en de fr nl SAFETY INSPECTION Personnel Installing and operating personnel must possess the appropriate knowledge and training. Follow the instructions Installation,
More informationVento VI Connect VI 19/25 INSTALL
en de fr nl SAFETY INSPECTION DISASSEMBLING prescriptions 2 SAFETY INSPECTION Personnel Installing and operating personnel must possess the appropriate knowledge and training. Follow the instructions Installation,
More informationCompresso Connect. Pressure maintenance systems with compressors For heating systems up to 12 MW and cooling systems up to 18 MW
Compresso Connect Pressure maintenance systems with compressors For heating systems up to 12 MW and cooling systems up to 18 MW IMI PNEUMATEX / Pressurisation / Compresso Connect Compresso Connect Compresso
More informationPressure maintenance system with pumps and integrated vacuum degassing
Transfero TV Connect Pressure maintenance system with pumps and integrated cyclonic vacuum degassing For heating systems up to 8 MW and cooling systems up to 13 MW IMI PNEUMATEX / Pressurisation / Transfero
More informationCompresso Connect F. Pressure maintenance systems with compressors For heating systems up to 4 MW and cooling systems up to 6 MW
Compresso Connect F Pressure maintenance systems with compressors For heating systems up to 4 MW and cooling systems up to 6 MW IMI PNEUMATEX / Pressurisation / Compresso Connect F Compresso Connect F
More informationPressure maintenance systems with compressors
Pressure maintenance systems with compressors Compresso Pressure maintenance systems with compressors Pressurisation & Water Quality alancing & Control Thermostatic Control ENGINEERING AVANTAGE Compresso
More informationTransfero TI. Pressure maintenence systems with pumps Pressure maintenance systems up to 40 MW with pumps
Transfero TI Pressure maintenence systems with pumps Pressure maintenance systems up to 40 MW with pumps IMI PNEUMATEX / Pressurisation / Transfero TI Transfero TI Transfero TI is a precision pressure
More informationTransfero TVI Connect
Transfero TVI Connect Pressure maintenance system with pumps and integrated cyclonic vacuum degassing For heating systems up to 8 MW and cooling systems up to 13 MW IMI PNEUMATEX / Pressure Maintenance
More informationPressure maintenance systems with compressors
Pressure maintenance systems with compressors Compresso Pressure maintenance systems with compressors Pressurisation & Water Quality alancing & Control Thermostatic Control ENGINEERING AVANTAGE Compresso
More informationTransfero T_. Pressure maintenance system with pumps For systems up to 10 MW
Transfero T_ Pressure maintenance system with pumps For systems up to 10 MW IMI PNEUMATEX / Pressurisation / Transfero T_ Transfero T_ Transfero T_ is a precision pressure maintenance device up to 10 MW
More informationPressure maintenance systems up to 10 MW with pumps
Pressure maintenance system with pumps Transfero T_ Pressure maintenance systems up to 10 MW with pumps Pressurisation & Water Quality alancing & Control Thermostatic Control ENGINEERING ADVANTAGE Pneumatex
More informationAquapresso. Pressure stabilisation for potable water Pressure stabilisation for potable water
Aquapresso Pressure stabilisation for potable water Pressure stabilisation for potable water IMI PNEUMATEX / Pressure Maintenance and Control / Aquapresso Aquapresso Expansion vessels with fixed gas cushion
More informationECONORESS ELECTRONIC EPS & EPT - ENHANCED PRESSURISATION SET INSTALLATION OPERATION & MAINTENANCE DOCUMENTATION
ECONORESS ELECTRONIC EPS & EPT - ENHANCED PRESSURISATION SET INSTALLATION OPERATION & MAINTENANCE DOCUMENTATION OCT2010 STOKVIS ENERGY SYSTEMS 96R WALTON ROAD EAST MOLESEY SURREY KT8 0DL TEL: 020 87833050
More informationInstallation, Operation and Maintenance Instructions for Electronically Controlled Pressurisation Units
Installation, Operation and Maintenance Instructions for Electronically Controlled Pressurisation Units Models: EPS Single Pump EPT Twin Pump EPS-HP EPT-HP Single Pump High Pressure Twin Pump High Pressure
More informationLIKE ME. Expert, highly efficient and customer-orientated
Pressure maintenance solutions that are LIKE YOU Simply Compresso Statico Compresso C10 F Connect Transfero TVI Connect LIKE ME. Expert, highly efficient and customer-orientated IMI Pneumatex: A company
More informationMEGAS 2.0. Gas analysis with direct C-Level Calculation and Bus-Connection. Data sheet
Data sheet MEGAS 2.0 Gas analysis with direct C-Level Calculation and Bus-Connection Mesa Industrie-Elektronik GmbH Neckarstraße 19, D-45768 Marl info@mesa-gmbh.de +49 (0) 2365-97 45 1-0 +49 (0) 2365-97
More information1 Notes on the operating manual Liability and guarantee Safety Description of the device... 9
Reflexomat with Touch controller with one compressor: RS 150/1, RS 300/1, RS 400/1, RS 580/1 with two compressors: RS 90/2, RS 150/2, RS 300/2, RS 400/2, RS 580/2 01.06.2014 GB Operating manual Original
More informationVacuum spray degassing
Vacuum spray degassing Servitec 35-95 01.04.2014 GB Operating manual Original operating manual Contents English Contents 1 Notes on the operating manual... 5 2 Liability and guarantee... 5 3 Safety...
More informationTransmitter CS 21 Operation Manual
Transmitter CS 21 Operation Manual 1194 Oak Valley Drive, Suite 20, Ann Arbor, MI 48108 800-959-0573 734-769-1888 Content Page For your Safety 3 General Description 3 Detection Principle 4 Operation 4
More informationSTAP. Differential pressure controllers DN , ANSI flanges
STAP Differential pressure controllers DN 65-100, ANSI flanges IMI TA / Differential pressure controllers / STAP STAP The flanged STAP is a high-performing differential pressure controller that keeps the
More informationTransmitter CS 21 Operation Manual
Transmitter CS 21 Operation Manual Content Page For your Safety 3 General Description 3 Detection Principle 4 Operational Notes 4 Design 4 Mounting Position of CS21 5 Mounting 6 Installation of Electrical
More information1 Notes on the operating manual Liability and guarantee Safety Description of the device... 9
Variomat with Touch controller with one pump: VS 2-1/60 /75 /95 with two pumps: VS 2-2/35 /60 /75 /95 GB Operating manual Original operating manual 25.06.2014 English Variomat with Touch controller Contents
More informationSTAP. Differential pressure controllers DN , ANSI fl anges
STAP Differential pressure controllers DN 65-100, ANSI fl anges IMI TA / Differential pressure controllers / STAP STAP The fl anged STAP is a high-performing differential pressure controller that keeps
More informationMass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Bypass MFC with capillary technology for nominal flow rates from 5 ml N /min to 15 l N /min Applicable for aggressive gases Compact design and digital communication
More informationFlamco Flamco-Fill STA Flamco-Fill STM
STA STM Typ STA 5936 Typ STM 5937 GB Installation and operating instructions 1999, 2 Contents GB UK Limited P.O. Box 9, Washway Lane, St. Helens, Merseyside WA10 6FE United Kingdom Telephone: 01744 744744
More informationUSER S MANUAL BASIC HORIZONTAL OIL-LUBRICATED MICROCOMPRESSOR Reference: RCMPBH
USER S MANUAL BASIC HORIZONTAL OIL-LUBRICATED MICROCOMPRESSOR Reference: RCMPBH THIS MANUAL IS INTENDED FOR TECHNICAL STAFF IN CHARGE OF THE INSTALLATION, THE OPERATION AND THE MAINTENANCE OF THIS PRODUCT
More informationTBV-CM. Combined control & balancing valves for small terminal units For modulating control
TBV-CM Combined control & balancing valves for small terminal units For modulating control IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling systems, the
More informationPanther 5 Acute Care Ventilator
1 HIGHLIGHTS High performance and advanced features target the ICU environment Utilizes an internal blower with a specially designed flow control valve removing the need for using compressed air without
More information3G Operating instructions. Digital Purge Gas Valve 3G Type: Document no.: D0001 Version: 01. July 2011/Rev.
3G Operating instructions Type: 03-5110-00.. Document no.: 03-5110-7D0001 Version: 01. July 2011/Rev. 0 Operating Instructions Type: 03-5110-00.. Document no.: 03-5110-7D0001 Version: 1 July 2011 / Rev.
More informationSafety. Operating instructions Solenoid valve for gas VG 10/15 VG 65 DANGER. Contents WARNING CAUTION. Changes to edition 11.14
2 Elster GmbH Edition. Translation from the German 22 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Solenoid valve for gas G / G Contents Solenoid valve for gas G / G....
More informationLK-SX CO 2 +VOC. Application. Security Advice Caution. Notes on Disposal
LK-SX CO 2 +VOC Sensor for detection of carbon dioxide (CO 2) and mixed gas content in air ducts Data sheet Subject to technical alteration Issue date: 24.08.2015 Application For detection of CO2 and VOC.
More informationManual Power relay SR853
Manual Power relay SR853 Rev. 0 SR853 manual page2 Safety Guidelines for explosion proof devices Application and Standards This instruction manual applies to explosion protected control systems of protection
More informationDK48 - DK800. Quick Start. Variable area flowmeter
Quick Start Variable area flowmeter General safety notes You can find the newest and/or additional information in the handbook, the datasheet, special manuals, certificates and the download center at www.krohne.com.
More informationInstallation, Operation and Maintenance Instructions for Electronically Controlled Pressurisation Units Digital Range
Installation, Operation and Maintenance Instructions for Electronically Controlled Pressurisation Units Digital Range Models: DS 126 Single Pump / Single System DT 126 Twin Pump / Single System DS 160
More informationSTAG. Balancing valves Balancing valve with grooved ends DN
STAG Balancing valves Balancing valve with grooved ends DN 65-300 IMI TA / Balancing valves / STAG STAG A grooved end, ductile iron balancing valve that delivers accurate hydronic performance in an impressive
More informationLTB013EN. Operating Instruction Trimod Besta Level Switch types XA 5, XB 5 for use in potentially explosive atmospheres acc.
LTB013EN Operating Instruction Trimod Besta Level Switch types XA 5, XB 5 for use in potentially explosive atmospheres acc. to IECEx scheme Subject to technical modification Bachofen AG Ackerstrasse 42
More informationFlamco Airfix D-E. Installation and operating instructions. 1999, Flamco eps
Airfix D-E 6442.eps GB Installation and operating instructions 1999, Exclusion of liability All operation and maintenance related technical information, data and instructions contained in these installation
More informationAccessories. Accessories for pressure maintenance
Accessories Accessories for pressure aintenance IMI PNEUMATEX / Accessories and ervice / Accessories Accessories High quality accessories coplete the range of PNEUMATEX pressure aintenance products. Thus
More informationTA-FUSION-P. NPT threads / ANSI flanges
TA-FUSION-P NPT threads / ANSI flanges Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P
More informationLK-SX VOC. Application. Security Advice Caution. Notes on Disposal. Combined sensor mixed gas. Data sheet
LK-SX VOC Combined sensor mixed gas Data sheet Subject to technical alteration Issue date: 24.08.2015 Application The sensor detects air quality in ventilation ducts. A stronger output signal of the sensor
More informationTightness controls TC 1 3 and TC 4
Tightness controls TC 1 3 and TC 4 Test of both safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted to different systems
More informationOxymax COS61/COS61D. Technical Information
Technical Information Oxymax / Dissolved oxygen measurement Optical sensor acc. to the fluorescence quenching principle, with or without Memosens protocol Application The continuous measurement of the
More informationInstallation, operating and maintenance Instructions for Seemag bypass level indicator
Issue: S Date: 05-09-14 Type G35 General information The Seetru bypass magnetic level indicator, abbreviate SEEMAG, serves to show the filling level of fluids in tanks, basins, tubes etc. The Seemag operates
More informationTA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics
TA-FUSION-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P TA-FUSION-P These innovative
More informationAirox Supportair Ventilator
Airox Supportair Ventilator A versatile hospital ventilator with a titration platform that enables a smooth transition to the patient s home care ventilator Titration Platform The Supportair ventilator
More information* * Data Sheet and Operating Manual. Digital manometer ME01 ## # 87 # HL S#### Dust explosion protection Zone 22.
*09005087* DB_BA_EN_ME01_S Rev.A 12/16 *09005087* d e v e l o p i n g s o l u t i o n s Data Sheet and Operating Manual ME01 Digital manometer Table of Contents ME01 ## # 87 # HL S#### Dust explosion protection
More informationPressurisation Systems. Variomat. Pump Controlled Pressurisation Systems. Pressure maintenance Deaeration Water make-up. For Control Touch:
Variomat Pump Controlled Pressurisation Systems Pressure maintenance Deaeration Water make-up For Control Touch: 17 Control Unit Control Basic Control Basic S Control Touch 2-line LCD display 8 control
More informationTBV-CM. Combined control & balancing valves for small terminal units For modulating control NPT threads
TBV-CM Combined control & balancing valves for small terminal units For modulating control NPT threads IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling
More informationSTA. Double regulating valves DN 15-50
STA Double regulating valves DN 15-50 IMI TA / Balancing valves / STA STA The STA double regulating valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for
More informationPORTABLE WORK LIGHT MODEL NO: CL6FS OPERATION INSTRUCTIONS PART NO: GC0315
PORTABLE WORK LIGHT MODEL NO: CL6FS PART NO: 4003530 OPERATION INSTRUCTIONS GC0315 INTRODUCTION Thank you for purchasing this CLARKE Worklight. Before attempting to use this product, please read this manual
More informationSystem Pressure Manager Standard & System Pressure Manager Plus
System Pressure Manager Standard & System Pressure Manager Plus Installation, Commissioning & Servicing Instructions Note: THESE INSTRUCTIONS MUST BE READ AND UNDERSTOOD BEFORE INSTALLING, COMMISSIONING,
More informationSafety. Operating instructions Solenoid valve for gas VG 6 VG 15/10 DANGER. Contents WARNING CAUTION. Changes to edition 09.14
15 Elster GmbH Edition 7.15 Translation from the German 519 D F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Solenoid valve for gas VG VG 15/1 Contents Solenoid valve for gas
More informationTECHNICAL MANUAL HEAVY DUTY HORIZONTAL MICRO-COMPRESSOR Reference: RCMPH
TECHNICAL MANUAL HEAVY DUTY HORIZONTAL MICRO-COMPRESSOR Reference: RCMPH THIS MANUAL IS INTENDED FOR TECHNICAL STAFF IN CHARGE OF THE INSTALLATION, THE OPERATION AND THE MAINTENANCE OF THIS PRODUCT CAUTION!
More informationDimensions. Technical Data General specifications Switching element function Rated operating distance s n 5 mm
Dimensions M18x1 37 40 4 0102 24 LED Model Number Features 5 mm embeddable Usable up to SIL2 acc. to IEC 61508 Connection BN BU Accessories L+ L- EXG-18 Quick mounting bracket with dead stop BF 18 Mounting
More informationreflex gigamat Pressure-maintaining station Assembly, operating and maintenance instructions Status 03/07
Pressure-maintaining station Assembly, operating and maintenance instructions Status 03/07 Table of contents General Assembly Overview 3 Type key for control unit, control panel 4 General safety instructions
More informationMass Flow Meter (MFM) for Gases
873 Mass Flow Meter (MFM) for Gases Direct flow measurement by MEMS- Technology for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 ) High accuracy Short response time Compact design and digital
More informationSTA. Double regulating valves DN 15-50
STA Double regulating valves DN -0 IMI TA / Balancing valves / STA STA The STA double regulating valve delivers accurate hydronic performance in an impressive range of applications. Ideally suited for
More informationBSS 2 Bottle Sampling System. Instruction manual Version 1.8
BSS 2 Bottle Sampling System Instruction manual Version 1.8 Serial-No.:... Version-/Rev.-Date : 12.06.2012 Contents 1. General... 3 2. Safety Instructions... 4 3. Extent of Delivery... 5 4. Switch Panel...
More information2-Port Seat Valves with Flange, PN 16
4 45 2-Port Seat Valves with Flange, PN 6 VVF45... dular cast iron EN-GJS-400-5 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SKB...- or SKC...- electrohydraulic actuators Use For use in
More informationPressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/ Equipotential bonding Diaphragm The pressure
More informationTechnical Data. General specifications. Rated operating distance s n 5 mm
0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching
More informationInstallation and Operation Manual
Manual Static pressure transducer with controller Differential static pressure transducer with analog output and optional PI control mode Large diaphragm element with differential transformer Transducer
More informationOperating Manual * * Pressure Transmitter. Table of Content. 1 Safety Guidelines. 1.3 Risks due to Non-Observance of Safety Instructions
*09005184* BA_EN_ME11 Rev.B 09/15 *09005184* d e v e l o p i n g s o l u t i o n s ME11 Operating Manual Pressure Transmitter Table of Content 1 Safety Guidelines 2 Application Purpose 3 Description of
More informationTechnical Data. General specifications Switching element function Rated operating distance s n 2 mm
0102 Model Number Features 2 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-12 Quick mounting bracket with dead stop BF 12 Mounting flange, 12 mm Technical Data specifications Switching
More informationOxygen Meter User Manual
Oxygen Meter User Manual Monday, July 23, 2007 1. Outline...2 2. Program...3 2.1. Environment for program execution...3 2.2. Installation...3 2.3. Un installation...3 2.4. USB driver installation...3 2.5.
More informationSTAD-C. Balancing valves DN 15-50
STAD-C Balancing valves 15-50 IMI TA / Balancing valves / STAD-C STAD-C The STAD-C balancing valve has been specially developed for use in indirect cooling systems but performs just as effectively in refrigerated
More informationInstallation, use and maintenance instructions. Gas burner (5)
Installation, use and maintenance instructions Gas burner MODEL GAS 4 TYPE 516 T80 291 (5) TECHNICAL FEATURES Thermal output 180-470 kw 154.800-404.200 kcal/h Fuel Natural gas Pci 8-10 kwh/m 3 = 7000-8600
More information2-Port Seat Valves with Flange, PN 16
4 40 2-Port Seat Valves with Flange, PN 6 VVF4... Grey cast iron EN-GJL-250 valve body DN 50...50 k vs 9...00 m /h Can be equipped with SQX- electromotoric or SKD...-, SKB...- or SKC...- electrohydraulic
More informationMANUAL GAS MANIFOLDS
MANUAL GAS MANIFOLDS Phoenix Pipeline Products Limited. Unit 8, McKenzie Industrial Park, Tel No.: 44 (0) 161 428 7200 Bird Hall Lane, Fax No.: 44 (0) 161 428 7010 Stockport, Email: info@p3-phoenix.com
More informationInstallation & Maintenance Instructions TEC-11N TIMER. Analogue electronic timer 02/09
Installation & Maintenance Instructions TEC-11N TIMER Analogue electronic timer 02/09 GENERAL OPERATION The TEC-11N timer is produced using SMT (Surface Mounting Technology), ensuring improved performance
More informationBUBBLER CONTROL SYSTEM
BUBBLER CONTROL SYSTEM Description: The HDBCS is a fully automatic bubbler system, which does liquid level measurements in water and wastewater applications. It is a dual air compressor system with, air
More informationTechnical Data. Dimensions
00 Model Number Features mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,
More informationINSTRUCTION MANUAL. FLOW CONTROL DRAWERS MANUAL / PLC CONTROL SERIES Model Version Perma Pure LLC Tel:
PERMA PURE INSTRUCTION MANUAL FLOW CONTROL DRAWERS MANUAL / PLC CONTROL SERIES Model 3300 Version 4.06 Perma Pure LLC Tel: 732-244-0010 P.O. Box 2105, 8 Executive Drive Tel: 800-337-3762 (toll free US)
More informationElectronic gas volume corrector model DGVC-04
Electronic gas volume corrector model DGVC-04 1. Introduction The following user s manual gives information about the installation, configuration, usage and storage of the electronic gas volume corrector
More informationDimensions. Technical Data General specifications Switching element function Rated operating distance s n 10 mm
Dimensions M30x1,5 5 40 37 0102 Model Number 36 LED Features Comfort series 10 mm embeddable Connection BN BU Accessories BF 30 Mounting flange, 30 mm L+ L- Technical Data specifications Switching element
More informationAUTOMATIC GAS MANIFOLDS
AUTOMATIC GAS MANIFOLDS Phoenix Pipeline Products Limited. Unit 8, McKenzie Industrial Park, Tel No.: 44 (0) 161 428 7200 Bird Hall Lane, Fax No.: 44 (0) 161 428 7010 Stockport, Email: info@p3-phoenix.com
More informationMass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Type 8713 can be combined with... Direct flow measurement by MEMS- Technology for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 ) High accuracy and repeatability
More informationTA-COMPACT-P. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV)
Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV) IMI TA / Control valves / The pressure independent balancing and control valve ensures
More informationMagnetic level switch type MR783 Instruction Manual
Magnetic level switch Magnetic level switch type MR783 1. DESCRIPTION page 3 1.1 Operation page 3 1.2 Application page 3 1.3 Description page 3 2. SPECIFICATIONS page 3 2.1 Service Conditions page 4 2.2
More informationFloor heating. Floor heating manifolds Distributors
Floor heating Floor heating manifolds Distributors IMI TA / Floor heating control / Floor heating Floor heating These floor heating distributor manifolds are of size G1, and are supplied in pairs, i.e.
More informationExpert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
More informationTightness control TC. Product brochure GB 3 Edition AGA
Tightness control TC Product brochure GB 3 Edition 07.14 AGA Test of two safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted
More informationFlamco
EN 7-30 Flamco www.flamcogroup.com EN 7-30 INSTLLTION ND OPERTING INSTRUCTIONS Contents Page 1 General 3 1.1 bout this manual 3 1.2 Other supplied documentation 3 1.3 Use of Flamco products 3 1.4 Further
More informationOPERATORS MANUAL AHCON PCI 1000
OPERATORS MANUAL AHCON PCI 1000 1 INDEX: Page Manufacture information 3 Warnings 4 Risks and labelling 5 Safety and protection 5 Warranty 6 Measurements and weight 7 Measurement for dispatch 7 Connections
More informationI003 Lock Out - Tag Out - Try Out. Document information
2001-0046253 I003 Lock Out - Tag Out - Try Out Field of application RWE Generation NL Valid until 20-11-2020 Document information Version Version date Authorisation V3.2 20-11-2017 Manager Health, Safety
More informationOxygen Dialflow Meter. Instructions for Use
Oxygen Dialflow Meter Instructions for Use 702-0031.9 May 2014 1. Symbols Warning! Caution! Indicates a potentially hazardous situation which, if not avoided, could result in personal injury to the user
More informationreflex variomat Pressure-maintaining station Assembly, operating and maintenance instructions Status 03/07
Pressure-maintaining station Assembly, operating and maintenance instructions Status 03/07 Table of contents General Assembly Overview, type key for control unit 3 Control panel 4 General safety instructions
More informationDGBOX rev Inverter electronic control panels for single pumps or pumping units OPERATOR S AND MAINTENANCE MANUAL
DGBOX rev. 60 EN Inverter electronic control panels for single pumps or pumping units OPERATOR S AND MAINTENANCE MANUAL Model V in V out A P (kw) P (HP) DGB MV 30 3 ~ 400V 3 ~ 400V 8 3 4 DGB MV 55 3 ~
More informationSonoMeter 30 Energy Meters
Data Sheet SonoMeter 30 Energy Meters Description The Danfoss SonoMeter 30 is a range of ultrasonic, compact energy meters intended for measuring energy consumption in heating and cooling applications
More informationAPPLICATION NOTES DELOMATIC 4, DM-4 GAS
APPLICATION NOTES DELOMATIC 4, DM-4 GAS Emission control Lambda sensor p/t regulation Combustion chamber temperature regulation Emission control configuration Emission control curve Document no.: 4189340653C
More informationGRUNDFOS DATA BOOKLET. Hydro Solo-E. Complete pressure boosting systems 50/60 Hz
GRUNDFOS DATA BOOKLET Complete pressure boosting systems 5/6 z Contents Product data Performance range 3 Operating conditions Inlet pressure Type key Product range 5 Construction 5 Installation 5 Mechanical
More informationOC508 Programmable mv Calibrator
OC508_GBM_201609 OC508 Programmable mv Calibrator Owner s Manual Orbit Controls AG Zürcherstrasse 137 CH8952 Schlieren - ZH orbitcontrols.ch OC508 Programmable mv Calibrator Selection of DIN Thermocouples
More informationSG33KTL-M Quick Installation Guide. 1 Unpacking and Inspection
SG33KTL-M Quick Installation Guide This guide provides a general instruction of the installation procedures of SG33KTL-M. In no case shall this guide substitute for the user manual or related notes on
More informationBudget Range Operators Handbook
Budget Range Operators Handbook BAMBI AIR COMPRESSORS LTD 152 Thimble Mill Lane Heartlands Birmingham B7 5HT United Kingdom Tel: 0121 322 2299 Fax: 0121 322 2297 Email: sales@bambi-air.co.uk www.bambi-air.co.uk
More informationSG36KTL-M Quick Installation Guide. 1 Unpacking and Inspection
SG36KTL-M Quick Installation Guide This guide provides a general instruction of the installation procedures of SG36KTL-M. In no case shall this guide substitute for the user manual or related notes on
More informationHigh-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
More informationOperating Instructions in accordance with the Machines Directive 2006/42/EC
Lubricating Equipment Metering Technology for Grease and Oil High Pressure Hydraulic Customised Developments Operating Instructions in accordance with the Machines Directive 2006/42/EC Compressed air filling
More informationSpeed Controller ADR 40 Condensing pressure controller SPEED REGULATORS FOR ASYNCHRONOUS SINGLE PHASE MOTORS SERIES ADR 40 ADR 40 ADR 40 PP
SPEED REGULATORS FOR ASYNCHRONOUS SINGLE PHASE MOTORS SERIES ADR 40 ADR 40 ADR 40 PP Control by pressure or temperature Pressure control 0-50 bar for all refrigerants Temperature control -20 to +100 C
More informationKTM 50 (DN ) Installation, maintenance and operating instructions
52 762-306 09.2014 KTM 50 (DN 100-200) Installation, maintenance and operating instructions General High-performing and compact, these pressure-independent control valves for variable flow heating and
More informationHYPOXIC AIR FIRE PREVENTION SYSTEM TECHNICAL SPECIFICATION
HYPOXIC AIR FIRE PREVENTION SYSTEM TECHNICAL SPECIFICATION Introduction: Hypoxic Air Fire Prevention System is a revolutionary fire prevention technology. It has the unique ability to create a breathable
More information