DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES

Transcription

1 Hose Index Alphabetical Index DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES DESCRIPTION PAGES A/C and Refigeation Hose 17 AQP Hose Hose Hydaulic AQP 35, 36, 39, 40, 41, 45, 48, 49, 50, 51 AQP/HI-IMPULSE 39, 40, 48, 49 AQP/Hi-Pac 41 Double wie baid Fou spial wie Fou o six spial wie HI-IMPULSE 38-40, Hi-Pac 41 MatchMate BLUE 39, 48 MatchMate ICE 45 MatchMate Plus 39, 47, 48, 51 Single wie baid Textile baid 21, 22, Wie inseted suction 34, 35 Special application Aibake AQP 23-25, 27, 33 Convoluted PTFE 31, 32 Engine and aibake 23 EPDM 40, 49 Fuel and oil Jack Hose 57 LPG 27, 28 Powe steeing 41 Raiload aibake 22 Silicone ubbe (coolant) 20 Silicone ubbe (heate) 20 SOCKETLESS PTFE Textile baid low pessue 32-34, How to ode 12 PTFE Hose Themoplastic Hose PRESSURE HOSE Pat Numbe Index PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. PART # PG. 302A A Eaton s Aeoquip Hose and Fitting Assembly Poduct Waning Flexible hose lines offe many advantages ove igid tubing including outing ease, vibation absoption, sound deafening and the ability to accommodate movement of connected components. Howeve, hose lines equie caution in use not only to povide long sevice, but also to guad against potentially dangeous failue. Impotant The use should caefully obseve the pecautions listed in this catalog, including the ecommendations on the selection of hose and fittings on the elevant pages, and the pages on fluid compatibility. In addition, cae should be taken not to exceed the minimum bend adius listed fo each hose size and type in the hose section. CR FC FC FC FC FC FC FC FC FC FC273B 54 FC FC FC FC FC FC FC FC FC Maximum opeating pessue should not exceed pessues listed in the hose data. Instuctions fo assembling fittings to diffeent hose should be followed caefully to ensue the pefomance of the completed assembly. WARNING Eaton fitting toleances ae engineeed to match Eaton s Aeoquip hose toleances. The use of Eaton fittings on hose supplied by othe manufactues and/o the use of Eaton s Aeoquip hose with fittings supplied by othe manufactues may esult in the poduction of uneliable and unsafe hose assemblies and is neithe ecommended no authoized by Eaton Copoation o any of its affiliates o subsidiaies. FC FC FC FC FC FC FC FC FC FC FC FC FC606B 56 FC FC FC FC FC FC FC WARNING consideations must be obseved in selecting appopiate components fo the application of these poducts contained heein. The failue to follow the ecommendations set foth in this catalog may esult in an unstable application which may esult in seious pesonal injuy o popety damage. EATON CORPORATION OR ANY OF ITS AFFILIATES OR SUBSIDIARIES SHALL NOT BE SUBJECT TO AND DISCLAIMS ANY OBLIGA- TIONS OR LIABILITIES (INCLUDING BUT NOT LIMITED TO ALL CONSE- QUENTIAL, INCIDENTIAL AND CONTINGENT DAM- AGES) ARISING FROM TORT CLAIMS (INCLUDING WITHOUT LIMITATION NEGLIGENCE AND STRICT LIABILITY) OR OTHER THE- ORIES OF LAW WITH RESPECT TO ANY HOSE ASSEMBLIES NOT PRO- FC FC FC FC FC FC FC FC839B 43 FC FC849B 44 GH GH GH GH GH GH GH GH GH GH DUCTED FROM GENUINE AEROQUIP HOSE FIT- TINGS, HOSE AND AERO- QUIP APPROVED EQUIP- MENT, AND IN CONFOR- MANCE WITH EATON S AEROQUIP PROCESS AND PRODUCT INSTRUCTIONS FOR EACH SPECIFIC HOSE ASSEMBLY. Failue to follow these pocesses and poduct instuctions and limitations could lead to pematue hose assembly failues esulting in popety damage, seious injuy o death. Routing If the use follows the ecommendations on hose line outing and installation as povide heein, impoved safety and longe sevice life of any hose installation will esult. TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE EQUIPMENT APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

2 How to Ode PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS EQUIPMENT APPENDICIES Accuate pocessing and pompt delivey of you ode depends on easy identification of you equiements. Please ode Aeoquip band pats using coect pat numbes as descibed in this catalog. Inquiies and odes should be diected to you Aeoquip Distibuto o: Eaton Copoation Lone Oak Road Eden Paiie, MN USA 952/ ; Fax: 952/ Pat numbes and dash sizes Dash size designates the nominal size in 16ths of an inch. This numbe immediately follows the pat numbe and is sepaated fom it with a dash. Dimensions Dimensions given in this catalog fo Aeoquip poducts ae appoximate and should be used fo efeence only. Exact dimensional infomation fo a given poduct is subject to change and vaying toleances; contact Eaton diectly fo full cuent infomation. WARNING Hose assemblies Eaton manufactues the teminal ends of ou hose fittings to the appopiate equiements established by the SAE. Theefoe, the pefomance atings of these hose fittings meet the SAE equiements. It is possible to ode a hose assembly with a fitting teminal end that has a pefomance ating lowe than the hose ating. When odeing hose assemblies, please keep the connecting end pefomance ating in mind since this may affect oveall hose assembly pefomance. Hose assembly components (hose and fittings) ae easily assembled in the field. Howeve, factoy assembled eusable and cimped hose assemblies ae available. Fo complete infomation, contact Eaton. Cut length hose Cut lengths of hose should be odeed as shown below by specifying lengths in inches. Fo numeic pat numbes: Hose type Hose size (in 16ths of an inch) Cut length (in inches) last digit is in 1 / 8 ths of an inch = 48 1 / 2 inches Fo alpha-numeic pat numbes: FC Hose type Hose dash size Cut length (in inches) last digit is in 1 / 8 ths of an inch = 48 1 / 2 inches Bulk hose Bulk hose should be odeed by specifying length in feet as shown below. Complete numbe 500 ft Quantity (in feet) Hose type Hose size (in 16ths of an inch) Note: Length toleance fo hose, assemblies and sleeves is: Up to and including 12 inches: ± 1 / 8" Above 12 inches to and including 18 inches: ± 3 / 16 " Above 18 inches to and including 36 inches: ± 1 / 4 " Above 36 inches: ±1% of length 12 EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

3 AQP Hose Refe to AQP Catalog A-HOAQ-MC001-E fo moe infomation on AQP hose. FC300 AQP Hose The supeio high-tempeatue, abasion-esistant hose. Featues extensive fluid compatibility. See page 27. PRESSURE HOSE Exceeds SAE100R5 FC194 AQP/HI-IMPULSE Hose Exceeds SAE100R1A, EN853 1ST, ISO TYPE 1ST FC195 AQP/HI-IMPULSE Hose Exceeds SAE100R2A, EN853 2ST, ISO TYPE 2ST FC510 AQP/Hi-Pac Hose Exceeds SAE100R2 Pefomance Requiements Combines supeio hightempeatue esistance and extensive fluid compatibility plus opeating pessues up to 40% geate than SAE100R1 hose. Combines supeio high tempeatue esistance and extensive fluid compatibility plus opeating pessues up to 40% geate than SAE100R2 hose. Combines the flexibility and economy of Hi-Pac hose with the tempeatue and fluid compatibility of AQP hose. Aeoquip band HI-IMPULSE hose constuction is a patented pocess. Patent numbe 3,725,167. See page 40. Aeoquip band HI-IMPULSE hose constuction is a patented pocess. Patent numbe 3,725,167. See page 49. Aeoquip band Hi-Pac hose constuction is patented. Patent numbe 3,463,197. See page 41. TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE FC323 AQP Hose Unifom Pessue Spial Wie Hose 210,0 BAR [3000 psi] The featues of AQP constuction and spial wie einfocement ae combined in this quality hose style. See page 50. FC324 AQP Hose Unifom Pessue Spial Wie Hose 280,0 BAR [4000 psi] Featues the patented AQP tube compound and 4-spial wie einfocement. Uses the same fittings as FC323. See page 50. EQUIPMENT FC325 AQP Hose Unifom Pessue Spial Wie Hose 350,0 BAR [5000 psi] Featues the patented AQP tube compound and 4-spial wie einfocement. Pessues to 350,0 BAR [5000 psi]. See page 51. APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

4 FC350 AQP Hose Exceeds FMVSS-106 Type All The evolutionay tuck hose with supeio abasion esistance. Featues an AQP tube fo excellent fluid compatibility and tempeatue equiements. See page 23. PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS FC355 AQP Hose Exceeds FMVSS-106 Type All FC234 AQP Hose FC332 AQP SOCKETLESS Hose FC498 AQP Hose Ideal fo tuck maintenance and piping conditions whee fluid compatibility and chemical esistance ae equied. Fie esistant fuel hose meets USCG AI equiements. Offes positive fie esistance in Offes extended fluid compatibility and opeating tempeatue ange fo low pessue applications. Fo low pessue applications. Has a blue AQP elastome cove fo fluid esistance. See page 23. citical applications without using a fiesleeve. See page 25. Used with Aeoquip band SOCKETLESS fittings fo quick and easy assembly. See page 33. See page 36. Exceeds SAE100R6 TUBE FITTINGS 2661 AQP Hose Exceeds SAE100R4 The dual-pupose hose with extensive fluid compatibility is ideal fo eithe suction o chemical tansfe applications. See page 35. GH194 MatchMate BLUE AQP/HI-IMPULSE Hose Exceeds SAE 100R1AT A thin cove, 1-wie vesion of AQP/HI-IMPULSE hose that allows the use of Aeoquip MatchMate Plus Thu-The-Cove (TTC) fittings. Pessues to 227,0 BAR [3250 psi]. See page 39. EQUIPMENT APPENDICIES GH195 MatchMate BLUE AQP/HI-IMPULSE Hose Exceeds SAE 100R2AT FC650 AQP Hose High Tempeatue Fuel and Oil A thin cove, 2-wie vesion of AQP/HI-IMPULSE hose that allows the use of Aeoquip MatchMate Plus Thu-The-Cove (TTC) fittings. The evolutionay tuck hose with supeio abasion esistance. Featues an AQP tube fo excellent fluid compatibility and tempeatue equiements. Pessues to 397,0 BAR [5750 psi]. See page 48. Pessue to 70,0 BAR [1000 psi]. See page EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

5 Themoplastic Hose Refe to Eveflex Catalog E-HOEV-MC001-E fo moe infomation on Themoplastic hose. FC372 Polyon Themoplastic Hose SAE100R7 - Medium Pessue Pemium hose with elastome tube (Hytel*), single baid polyeste einfocement, black polyuethane cove, and opeating tempeatue ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. PRESSURE HOSE FC373 Polyon Themoplastic Hose SAE100R7 - Medium Pessue - Non-Conductive FC374 Polyon Themoplastic Hose SAE100R8 - High Pessue FC375 Polyon Themoplastic Hose SAE100R8 - High Pessue - Non-Conductive Pemium hose with elastome tube (Hytel*), single baid polyeste einfocement, oange polyuethane cove and opeating Pemium hose with elastome tube (Hytel*), single baid aamid polyeste einfocement, black polyuethane cove and opeating tempeatue Pemium hose with elastome tube (Hytel*), single baid aamid polyeste einfocement, oange polyuethane cove and opeating tempeatue tempeatue ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE FC376 Polyon Themoplastic Hose Vey high Pessue FC377 Polyon Themoplastic Hose Vey high Pessue - Non-Conductive FC390 Polyon Themoplastic Hose SAE100R7 - Medium Pessue with Flame Retadent Cove *Hytel is a egisteed tademak of E.I. DuPont. Pemium hose with elastome tube (Hytel*), single baid aamid polyeste einfocement, black polyuethane cove and opeating tempeatue Pemium hose with elastome tube (Hytel*), single baid aamid polyeste einfocement, oange polyuethane cove and opeating tempeatue Pemium hose with elastome tube (Hytel*), double baid polyeste einfocement, black pefoated flame etatdent polyuethane cove and ange of -40 C to +66 C [-40 F to 150 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. ange of -40 C to +66 C [-40 F to 150 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. opeating tempeatue ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. EQUIPMENT APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

6 FC690 Polyon Themoplastic Hose SAE100R7 - Medium Pessue - Low Tempeatue Flexing Pemium hose with elastome tube (Hytel*), double baid aamid einfocement, black pefoated polyuethane cove with opeating tempeatue ange of -54 C to +93 C [-65 F to 200 F], and maximum flex life. Fo moe infomation, efe to catalog E-HOEV-MC001-E. PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS EQUIPMENT APPENDICIES FC701 Gato Hose 2,500 PSI Sewe Cleaning Hose FC702 Gato Hose 3,000 PSI Sewe Cleaning Hose FC727 Polyon Themoplastic Hose SAE100R7 - Medium Pessue FC901 Polyon Themoplastic Twin-Line Hose SAE100R7 - Medium Pessue - Non-Conductive FC902 Polyon Themoplastic Twin-Line Hose SAE100R7 - Medium Pessue FC914 Polyon Themoplastic Twin-Line Hose SAE100R8 - High Pessue FC916 Themoplastic Twin-Line Hose SAE100R8 - High Pessue - Non-Conductive Blue polyethylene tube, single polyeste baid einfocement and oange ethe-based polyuethane cove hose and maximum flexibility. Opeating Blue polyethylene tube, single polyeste baid einfocement and blue ethe-based polyuethane cove hose and maximum flexibility. Opeating High quality themoplastic hose with nylon tube, two polyeste baid einfocement, polyuethane cove, and opeating tempeatue ange of -40 C to +93 C [-40 F to 200 F]. Two FC373 hoses welded togethe. Hose constucted of elastome tube (Hytel*), single baid polyeste einfocement, with oange polyuethane cove and opeating tempeatue Two FC372 hoses welded togethe. Hose constucted of elastome tube (Hytel*), single baid polyeste einfocement, with black polyuethane cove Two FC374 hoses welded togethe. Hose constucted of elastome tube (Hytel*), single baid polyeste einfocement, with black polyuethane cove Two FC375 hoses welded togethe. Hose constucted of elastome tube (Hytel*), single baid polyeste einfocement, with oange polyuethane cove and opeating tempeatue tempeatue ange of -40 C to +66 C [-40 F to +150 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. tempeatue ange of -40 C to +66 C [-40 F to +150 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. Fo moe infomation, efe to catalog A-HH-MB-0001-E. ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. and opeating tempeatue ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. and opeating tempeatue ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. ange of -54 C to +93 C [-65 F to 200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. *Hytel is a egisteed tademak of E.I. DuPont. 16 EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

7 A/C and Refigeation Hose PRESSURE HOSE TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE Refe to A/C and Refigeation Catalog A-HOAC-MC001-E fo moe infomation on A/C and Refigfeation hose. GH134 Multi-Refigeant A/C and Refigeation Hose Exceeds SAE-J2064, Type E. FC558 R134a A/C and Refigeation Hose Meets SAE J2064 with 100R5 eusable fittings, sizes 10 to 24. FC802 Multi-Refigeant A/C and Refigeation Hose Hose constucted of polymide venee tube, with polyeste einfocement and chloobutyl cove. Tempeatue ange is -40 C to +135 C [-40 F to +275 F]. Fitting selection includes factoy cimp and the E-Z Clip line of A/C connections. Butyl tube and polyeste baid, abaision-esistant cove. Designed to wok with 100R5 eusable fittings. Tempeatue ange is 40 C to +121 C [-40 F to +250 F]. Hose constucted of polymide venee tube, with synthetic ubbe cove. Designed to wok with 100R5 eusable fittings. Tempeatue ange is -40 C to +121 C [-40 F to +250 F]. Fo moe infomation, efe to catalog A-HOAC-MC001-E. Fo moe infomation, efe to catalog A-HOAC-MC001-E. Fo moe infomation, efe to catalog A-HOAC-MC001-E. SAE-J2064, Type E constuction. FC555 Multi-Refigeant A/C and Refigeation Hose Meets SAE-J2064. FC505 Low Effusion, Multi-Refigeant A/C and Refigeation Hose Flexible hose is constucted of a cougated polymide tube fo exceptional flexibility in lage bus applications. This is a factoy cimp poduct. Please contact Eaton fo additional infomation to qualify fo field cimp of the Hose constucted of polymide venee tube with polyeste einfocement and synthetic ubbe cove. The FC505 fitting pogam is factoy cimp only. FC555 hose. Tempeatue ange is -40 C to +125 C [-40 F to +257 F]. Fo moe infomation, efe to catalog A-HOAC-MR001-E. Tempeatue ange is -40 C to +135 C [-40 F to +275 F]. Fo moe infomation, efe to catalog A-HOAC-MC001-E. EQUIPMENT APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

8 PTFE Hose PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS Refe to Eveflex Catalog E-HOEV-MC001-E fo moe infomation on PTFE hose. Smooth Boe S Seies Hose Smooth Boe B Seies Hose Smooth Boe STW Seies Hose Smooth Boe S-3 Seies Hose Eveflex S Seies tube is einfoced with 304 stainless steel wie. All sizes have a minimum of.040 thick extuded vigin PTFE. That is 33% moe PTFE than most othe manufactues offe. The additional Eveflex STW Seies tube is einfoced with 304 stainless steel wie. STW hose is available as an altenative whee competitos thin wall poducts ae specified and S Seies hose can not be substituted. Radius in inches to inside bend. S-3 with a PVC cove is a PTFE hose which can be used fo DOT hydaulic bake line applications. PVC cove is on the exteio in thickness. The PVC cove is useful to potect motocycle paint PTFE esults in impoved bend adius, kink esistance and slows pemeation of gases. Tempeatue ange is -54 C to +230 C [-65 F to +450 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. Eveflex B Seies is einfoced with bonze wie. All sizes have a minimum of thick extended vigin PTFE. Eveflex B Seies hose has taditionally been used in high vibation envionments. Tempeatue ange is -54 C to +204 C [-65 F to +400 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. Multiply bend adius by 1.25 fo dynamic applications. Tempeatue ange is -54 C to +230 C [-65 F to +450 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. jobs o povide duability in an abasive envionment. Tempeatue ange is -40 C to +93 C [-40 F to +200 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. EQUIPMENT APPENDICIES Smooth Boe SC Seies Hose SC Seies hose is identical to the S seies with one exception. SC hose has an intenal conductive static dissipating line that povides a path to the hose end fittings fo applications whee flow induced electostatic chages can occu. Radius in inches to inside bend. Multiply bend adius by 1.25 fo dynamic applications. Tempeatue ange is -54 C to +230 C [-65 F to +450 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. 18 EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

9 Smooth Boe SCTW Seies Hose SCTW Seies hose is identical to the STW Seies with one exception. SCTW hose has an intenal conductive static dissipating line that povides a path to the hose end fittings fo applications whee flow induced electostatic chages can occu. Radius in inches to inside bend. Multiply bend adius by 1.25 fo dynamic applications. Tempeatue ange is -54 C to +204 C [-65 F to +400 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. H243 PTFE Hose H277 Conductive PTFE Hose Smooth Boe Hi-PSI Seies Hose Inne Tube: PTFE, baid: single stainless steel baid, 1 size double stainless steel baid (type 304). Tempeatue ange is -54 C to +230 C [-65 F to +450 F]. Inne Tube: PTFE, baid: single stainless steel baid, 1 size double stainless steel baid (type 304). Tempeatue ange is -54 C to +230 C [-65 F to +450 F]. Hi-PSI Seies hose is a heavy wall PTFE hose fo vey high pessue applications. The einfocement is baided and not spialed allowing fo bette hose flexibility. Note: Not fo use in applications equiing static dissipation. Fo moe infomation, efe to catalog E-HOEV-MC001-E. Note: Not fo use in applications equiing static dissipation. Fo moe infomation, efe to catalog E-HOEV-MC001-E. Tempeatue ange is -54 C to +204 C [-65 F to +400 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. PRESSURE HOSE APPENDICIES TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE Conductive & Non-Conductive Convoluted Hose Conv-O-Cimp Convoluted PTFE tube with 304 stainless steel wie baid einfocement. Industial applications include: automotive, platten pesses, phamaceutical, tuck and bus, evese osmosis, hydaulics, chemical pocessing, steam, ai, wate, tie manufactuing, electonics, steel mills, food pocessing, and tank tuck tansfe. Tempeatue ange is -54 C to +204 C [-65 F to +400 F]. Fo moe infomation, efe to catalog E-HOEV-MC001-E. EQUIPMENT EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

10 PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS EQUIPMENT APPENDICIES FC252 Silicone ubbe (heate) Opeating Bust Bend Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius of Hose mm in mm in ba psi ba psi mm in Kg/m lbs/ft FC , , , , , , FC , , , , , , FC , , , , , , FC , , , , , , FC , , , , , , Silicone ubbe tube, baided fibe einfocement and silicone ubbe cove. 54 C to +177 C [ 65 F to +350 F] FC352 Silicone ubbe (coolant) Heate hose fo passenge cas and tucks; connecting lines fom hot wate heates to coolant-ciculating systems. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Maximum Minimum Opeating Bust Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue of Hose mm in mm in ba psi ba psi Kg/m lbs/ft FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , , , , FC , , ,0 25 7, , FC , , ,0 19 6,0 75 4, Silicone ubbe tube, fou spials of nylon and silicone ubbe cove. 54 C to +177 C [ 65 F to +350 F] Coolant system sevice with liquid-cooled engines. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Clamp 184 Clamp EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

11 2550/2554 Aibake SAE J1402 FMVSS106 Opeating Bust Bend Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius of Hose mm in mm in ba psi ba psi mm in Kg/m lbs/ft , , , , , , , , , , , , Synthetic ubbe tube, double textile baids and synthetic ubbe cove. 2550: 40 C to +93 C [ 40 F to +200 F], 2554: 54 C to +100 C [ 65 F to +212 F] 2570 SAE J1402 FMVSS106 Tacto to taile lines, axle chambe lines and tacto sevice lines. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Confoms to odinance spec. MIL-H-3992B, Type 1, Class 1. Opeating Bust Bend Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius of Hose mm in. mm in. ba psi ba psi mm in. Kg/m lbs/ft , , , , , , , , , , , , , , , , , , Synthetic ubbe tube, double textile baid and synthetic ubbe cove. 40 C to +100 C [ 40 F to +212 F] FC629 SAE J1402 FMVSS106 Tacto to taile lines, axle chambe lines and tacto sevice lines. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Cimp Fittings only, contact Eaton Aeoquip. Fitting 182 Factoy cimp fittings also available. Contact Eaton fo details. Fitting 182 Factoy cimp fittings also available. Contact Eaton fo details. PRESSURE HOSE TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE Opeating Bust Bend Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius of Hose mm in. mm in. ba psi ba psi mm in. Kg/m lbs/ft FC , , , , , , FC , , , , , , Synthetic ubbe tube, single polyeste baid and synthetic ubbe cove. 40 C to +100 C [ 40 F to +212 F] Tacto to taile lines, axle chambe lines and tacto sevice lines. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Factoy cimp fittings available. Contact Eaton fo details. EQUIPMENT APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

12 FC829 Aibake SAE J1402 FMVSS106 PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS Opeating Bust Bend Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius of Hose mm in. mm in. ba psi ba psi mm in. Kg/m lbs/ft FC , , , , EPDM ubbe tube, double textile baids and EPDM ubbe cove. 40 C to +100 C [ 40 F to +212 F] 1531/1531A Raiload Aibake Exceeds AAR-M618 Tacto to taile lines, axle chambe lines and tacto sevice lines. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Factoy cimp fittings available. Contact Eaton fo details. TUBE FITTINGS EQUIPMENT APPENDICIES Opeating Bust Bend Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius of Hose mm in. mm in. ba psi ba psi mm in. Kg/m lbs/ft , , , , , , , , , , , , , , , , , , , , , , , , A-24 35, , , , , , Synthetic ubbe tube, patial textile baid, wie einfocement ( and have single wie baid; , and 1531A-24 have double wie baid) and synthetic ubbe cove. 54 C to +100 C [ 65 F to +212 F] Locomotive aibake lines. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Fitting 185 Cimp fittings also available fo these sizes. Contact Eaton fo infomation. 22 EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

13 FC355 AQP Engine & Aibake FMVSS106 Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,7 20 0, FC , , , , , ,8 15 0, FC , , , , , ,8 15 0, FC , , , , , ,2 11 1, FC , , , , , ,2 11 1, AQP elastome tube, polyeste inne baid and a single wie baid einfocement, blue AQP elastome cove. 40 C to +150 C [ 40 F to +300 F] Ai not to exceed 250 psi o +250 C [+121 F]. FC350 AQP Engine & Aibake FMVSS106 Ai, gasoline, fuel, lubicating oils and coolants. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Cimp 100R5 134 Fitting 136 PRESSURE HOSE TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,7 20 0, FC , , , , , ,8 15 0, FC , , , , , ,8 15 0, FC , , , , , ,2 11 1, EQUIPMENT AQP elastome tube, polyeste inne baid and a single wie baid einfocement; black polyeste textile baided cove. 49 C to +150 C [ 55 F to +300 F] Ai not to exceed +121 C [+250 F]. Ai, gasoline, fuel lubicating oils and coolants. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Cimp 100R5 134 Fitting 136 APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

14 FC650 AQP High tempeatue fuel & oil PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,7 20 0, AQP elastome tube, single wie baid einfocement, black polyeste baided cove. 49 C to +150 C [ 55 F to +300 F] Ai not to exceed +121 C [+250 F]. Diesel fuel, gasoline, lubicating oils, wate, coolant and ai. Not appoved fo aibake applications. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Factoy cimp fittings available. Contact Eaton fo details. TUBE FITTINGS FC699 AQP High tempeatue fuel AQP lightweight engine hose EQUIPMENT APPENDICIES Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,0 18 0, FC , , , , , ,0 18 0, FC , , , , , ,0 18 0, AQP elastome tube, single aamid einfocement baid and textile baided cove. 40 C to +150 C [ 40 F to +300 F]. Ai not to exceed 250 psi o +250 C [+121 F]. Diesel fuel, gasoline, cude and lubicating oils. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Cimp OTC EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

15 FC234 AQP High tempeatue fuel and oil Fie esistant USCG/MMT, NMMA/BIA Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,7 20 0, FC , , , , , ,2 16 0, AQP elastome tube, bass plated steel wie einfocement, baided efactoy insulation and blue AQP elastome cove. 40 C to +150 C [ 40 F to +300 F] 2651 Single wie baid SAE 100R5 pefomance Diesel fuel, gasoline, hot lube oil and wate. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,7 20 0, , , , , , ,7 20 0, , , , , , ,8 15 0, , , , , , ,3 11 1, , , , , , ,3 11 2, Synthetic ubbe tube, textile inne baid, single wie baid einfocement, oute textile baid and synthetic ubbe cove. 40 C to +100 C [ 40 F to +212 F] Hydaulics, gasoline, fuel and lubicating oils, ai and wate. Ai not to exceed 250 psi o +71 C [+160 F]. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Maximum negative pessues shown fo -16 and lage ae suitable fo hose which has suffeed no extenal damage o kinking. If geate negative pessues ae equied fo -16 and lage hoses, the use of an intenal suppot coil is ecommended. Cimp 100R5 134 Fitting 136 Fitting 136 PRESSURE HOSE TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE EQUIPMENT APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

16 303/302A Single wie baid MIL-DTL-8794 PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, A-16 22, , , , , ,8 28 0, A-20 28, , , , , ,8 28 0, A-24 35, , , , , ,8 28 0, A32 46, , , , , ,8 28 1, Synthetic ubbe tube, textile inne baid, single wie baid einfocement and black textile baid cove. 303 hose: 54 C to +121 C [65 F to +250 F] 302A hose: 40 C to +121 C [ 40 F to +250 F] Hydaulics, ai, gasoline, fuel and lubicating oils. Ai not to exceed +71 C [+160 F]. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Fitting 136 TUBE FITTINGS EQUIPMENT APPENDICIES 1503 Single wie baid SAE 100R5 Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,7 20 0, , , , , , ,7 20 0, , , , , , ,8 15 0, , , , , , ,3 11 1, , , , , , ,3 11 2, Synthetic ubbe tube, textile inne baid, single wie baid einfocement and black textile baid cove. 40 C to +121 C [ 40 F to +250 F] Ai not to exceed +71 C ([+160 F]. Hydaulics, ai, gasoline, fuel and lubicating oils. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Maximum negative pessues shown fo -16 and lage ae suitable only fo those which has suffeed no extenal damage o kinking. If geate negative pessues ae equied fo -16 and lage hoses, the use of an intenal suppot coil is ecommended. Cimp 100R5 134 Fitting EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

17 FC300 AQP Single wie baid Exceeds SAE 100R5 Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,7 20 0, FC , , , , , ,7 20 0, FC , , , , , ,8 15 0, FC , , , , , ,3 11 1, FC , , , , , ,1 8 2, AQP elastome tube, polyeste inne baid, single wie baid einfocement and blue polyeste baid cove. 49 C to +150 C [ 55 F to +300 F] Ai not to exceed +121 C [+250 F]. FC321 LPG UL listing MH6044 Hydaulics handling petoleum base fluids and ai, gasoline, fuel and lubicating oils, fie esistant hydaulic fluids and othe industial fluids. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Maximum negative pessue shown fo -16 and lage ae suitable fo those which has suffeed no extenal damage o kinking. If geate negative pessues ae equied fo -16 and lage hoses, the use of an intenal suppot coil is ecommended. Does not comply with SAE 100R5 opeating pessue of 350 psi o minimum bust of 1400 psi. Opeating Bust Bend Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius of Hose mm in mm in ba psi ba psi mm in Kg/m lbs/ft FC , , , , , , FC , , , , , , FC , , , , , , FC , , , , , , FC , , , , , , FC , , , , , , FC , , , , , , Synthetic ubbe tube, a textile inne baid, a stainless steel wie baid einfocement and a synthetic ubbe impegnated textile baid cove. 40 C to +121 C [ 40 F to +250 F] Designed fo butane-popane applications on eithe mobile o stationay equipment. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages WARNING: LPG is a vey hazadous liquid o gas and should be handled with maximum cae to pevent leakage. Since the gas is heavie than ai, it may flow along the gound if it escapes and cause an explosion o a fie. No leakage should eve be toleated. Cimp 100R5 134 Fitting 136 Fitting 136 PRESSURE HOSE TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE EQUIPMENT APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

18 CR170 LPG Single stainless steel baid CGA (Canadian Gas Association) Type III PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS EQUIPMENT APPENDICIES Opeating Bust Bend Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius of Hose mm in mm in ba psi ba psi mm in Kg/m lbs/ft CR , , , , , , CR , , , , , , CR , , , , , , CR , , , , , , Nylon tube, single stainless steel baid einfocement, pefoated synthetic ubbe cove. 40 C to +121 C [ 40 F to +250 F] 2807 PTFE SAE 100R14A LPG (popane) vehicle, altenative fuel convesion systems. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages WARNING: LPG is a vey hazadous liquid o gas and should be handled with maximum cae to pevent leakage. Since the gas is heavie than ai, it may flow along the gound if it escapes and cause an explosion o a fie. No leakage should eve be toleated. NOTE: Must be CGA cetified to cimp assemblies. Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,6 12 0, , , , , , ,6 12 0, Extuded PTFE tube with stainless steel single wie baid. 73 C to +260 C [ 100 F to +500 F] Hot ai, steam, compesso dischage and most chemical applications. Not ecommended fo steam-cold wate cycling. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Steam 200 psi at +388 F max. Engineeing infomation is available fo specific citical tempeatue equiements. Contact Eaton. Maximum negative pessue fo -06 and lage ae suitable fo hose which has suffeed no extenal damage o kinking. If geate negative pessues ae equied fo -06 and lage hoses, the use of an intenal suppot coil is ecommended. Use of an intenal suppot coil in -06 and lage PTFE hose is ecommended fo tube suppot whee extended o continuous sevice at high tempeatue togethe with low o negative pessue is expected. Factoy cimp fittings available. Contact Eaton fo details. Cimp Fitting 129 Socket Data 64 Fitting EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005

19 FC807 PTFE SAE 100R14A Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,6 12 0, Extuded PTFE tube with stainless steel single wie baid and one end of Red Nomex*. 54 C to +230 C [ 65 F to +450 F] FC465 PTFE Conductive SAE 100R14B Hot ai, steam, compesso dischage and most chemical applications. Not ecommended fo steam-cold wate cycling. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages *Nomex is a tademak of E.I. DuPont. Maximum negative pessue fo -16 and lage ae suitable fo hose which has suffeend no extenal damage o kinking. If geate negative pessues ae equied fo -16 and lage hoses, the use of an intenal suppot coil is ecommended. Use of an intenal suppot coil in -06 and lage PTFE hose is ecommended fo tube suppot whee extended o continuous sevice at high tempeatue togethe with low o negative pessue is expected. Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,6 12 0, FC , , , , , ,6 12 0, Conductive extuded black PTFE tube with stainless steel single wie baid. 73 C to +260 C [ 100 F to +500 F] Steam, compesso dischage and most chemical applications. Not ecommended fo steam-cold wate cycling. Fo moe infomation on specific fluid applications and high tempeatue atings, see pages Steam 200 psi at +388 F max. Engineeing infomation is available fo specific citical tempeatue equiements. Contact Eaton. Maximum negative pessue fo - 06 and lage ae suitable fo hose which has suffeed no extenal damage o kinking. If geate negative pessues ae equied fo -06 and lage hoses, the use of an intenal suppot coil is ecommended. Use of an intenal suppot coil in -06 and lage PTFE hose is ecommended fo tube suppot whee extended o continuous sevice at high tempeatue togethe with low o negative pessue is expected. Cimp Fitting 129 Socket Data 64 Fitting 186 Cimp Fitting 129 Socket Data 64 Fitting 186 PRESSURE HOSE TUBE FITTINGS HOSE FITTINGS HIGH PRESSURE HOSE EQUIPMENT APPENDICIES EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay

20 PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS EQUIPMENT APPENDICIES 2808 PTFE Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in mm in ba psi ba psi mm in kpa in/hg Kg/m lbs/ft , , , , , ,8 28 0, , , , , , ,8 28 0, , , , , , ,7 20 0, , , , , , ,8 15 0, , , , , , ,8 15 0, , , , , , ,8 15 1, Extuded PTFE tube with double stainless steel baids. 73 C to +260 C [ 100 F to +500 F] FC469 PTFE Conductive Hot ai, steam and most chemical applications. Not ecommended fo steam-cold wate cycling. Fo moe infomation on specific fluid applications and high tempeate atings, see pages Steam 200 psi at +388 F max. Engineeing infomation is available fo specific citical tempeatue equiements. Contact Eaton. Maximum negative pessue fo -08 and lage ae suitable fo hose which has suffeed no extenal damage o kinking. If geate negative pessues ae equied fo -08 and lage hoses, the use of an intenal suppot coil is ecommended. Use of an intenal suppot coil in -08 and lage PTFE hose is ecommended fo tube suppot whee extended o continuous sevice at high tempeatue togethe with low o negative pessue is expected. See pages Opeating Bust Bend Vacuum Weight Pat Numbe Hose I.D. Hose O.D. Pessue Pessue Radius Sevice of Hose mm in. mm in. ba psi ba psi mm in. kpa in/hg Kg/m lbs/ft FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, FC , , , , , ,8 28 0, Conductive extuded PTFE tube with stainless steel single wie baid. 54 C to +204 C [ 65 F to +400 F] High pessue chemical and fluid tansfe. Fo infomation on specific fluid applications and high tempeatue atings, see pages Steam 200 psi at +388 F max. Engineeing infomation is available fo specific citical tempeatue equiements. Contact Eaton. Use of an intenal suppot coil in -06 and lage PTFE hose is ecommended fo tube suppot whee extended o continuous sevice at high tempeatue togethe with low o negative pessue is expected. See pages Fitting 175 Contact Eaton fo fitting infomation. 30 EATON Aeoquip Fluid Conveyance Poducts A-HOOV-MC001-E Januay 2005