Pneumatic Blow Guns & Shop Accessories

Transcription

1 OMPRESSED AIR SYSTEMS An efficient compressed air system is the product of good planning to ensure minimum pressure loss in the system, and the removal of most contaminants; water, compressor oil, particles, etc. An inefficient system results in higher costs per unit of compressed air, improper or erratic tool operation, shortened component life, and reduced capacity. These problems can cost hundreds of dollars a year. hen laying out a compressed air system, one should consider the size of the compressor and the most effective way to process and distribute the air. Many systems in operation today are the result of add-on components which have been interconnected as the requirement for air, within a given operation, is increased. The outline information here is offered as a guide for upgrading an existing system or to aid in planning a new compressed air system. Inflator w/ Swivel Dual huck N151* (med. duty) B $ N101* (heavy duty) B AIRLINE INFLATOR HUKS / LEVER VALVE & PRESSURE GAUGE 2" Dial with Rubber over Inflator w/ Dual huck & 2" Dial Gauge psi N135 $ TIRE & TANK VALVES N398 Replacement ORB Barb 12" Replacement hip for Inflator (N100 & N101 Only) N110 P $ /8"24 ORB x 1/4" Replacement Barb N398 $ 2.01 Tank valves provide automatic air from air tanks, steel barrels, compressors, and other pneumatic containers. Standard brass tank valves are suitable up to 200psi and the high pressure inflating connections (3000 psi, N556 / N2755) have stainless bodies for use in air charged units such as shock absorber struts, hydraulic pressure accumulators, surge cylinders, and other pneumatic systems. Tire & Bicycle Pump huck Valve Tank Inflator Valve / Snifter Valve (200 psi) N701* (1/8" MNPT) B $ 2.95 N701-2* (1/4"MNPT) A N701-42* (1/4" barb) B N705* (3/16" barb) $ 2.70 N706* (1/4" barb) B 3.07 ASME Safety Release Valve Valves Section N556 w/ MNPT N2755 w/ Flare High Pressure Inflating onnection N556 (1/8" MNPT) $ N2755 (3/8-24 for 3/16"Flare) N

2 TIRE PRESSURE MEASUREMENT GAUGES Standard Pocket Gauge N901D* (5-50psi) B $ 3.54 N906AD* (20-120) 4.49 Pocket HD Dual Foot Gauge N908* (20-120psi) B $ Digital Pressure Gauge N937* (5-99psi) $ AB - Miscellaneous Section The inflator chucks below have built in shut-off valves and will not work on inflator gauges, and those without valves will not work on live air lines. Ball Foot huck (1/4" NPT) N104* (w/ shut-off) A $ 5.20 N104G (no shut-off) N 5.86 Lock-on huck (1/4" NPT) N119* (w/ shut-off) $ N120* (no shut-off) Large HD Dual Foot Gauge N902* (10-150psi) $ AIRLINE INFLATOR HUKS ONLY Ball Foot huck (1/4" NPT) w/ Locking lip N104 $ 9.15 N109 N109E Long Standard Dual Foot huck w/ Shut-off Valve (1/4" Fem. NPT) N109* A $ 9.28 N109E** (10" long) B **arded for retail display. HD huck N126* (w/ shut-off) $ 5.80 Dual Foot huck w/ NO Shut-off Valve (1/4" Female NPT) N107* (1/4" FNPT) $ 9.28 ATER FAUETS (RADIATOR FILLER FAUETS) 574 Rubber Spout Rad Faucet N40R* (1/4" FNPT) B $ N41R (Fem GHT) N Press-to-Open Faucet N43 (Fem GHT) $ NAMT22 NAMF32 NAMF42 Threaded Airline Manifolds Pipe Fittings Section

3 BLO GUNS Standard Full Flow (1/4" NPT) N200* (heavy duty) A N200T (replace tip) N $ Rubber Kink Blow Gun N211* $ 8.23 Siphon Spray Gun N221 N220 (w/ non-adj) $ s N221 (non-adjust) $ Needle Tip Nozzles - 4pc Set Full Flow w/ Rubber Tip (1/4" NPT) N201* (heavy duty) A $ N202 (replace tip) 5.79 **Available in retail display packs (Prefix X). Blow Gun Accessory Kit - 17 pcs This includes an N901D pocket tire pressure gauge, N107 dual inflator air chuck, Industrial Interchange quick coupling nipples (4xM & 2xFNPT), one Industrial Interchange FNPT coupler, 2 N BR NPT hex nipples, 1 N BR NPT female coupling, 1 inflator needle, a barbed chuck & adapter, and an N200E blow gun with an extra safety nozzle. N200K8 $ Vapour Spray (1/4" NPT) N203VS* $ Trigger Blow Gun N204-30SE* (4" ext) A N204-30SL* (10" ext) $ Trigger Blow Gun w/ Built-in Regulator N204-30AA* (4" ext) $ Fits on the N200(E)/N201(E)/N208 blow guns. N200NT* $ 8.17 Flexible Metal Extension Fits on the N200, N201, N208 blow guns. N200F8 (8") $ Force 5 Gun w/ 72" Extension The Force 5 blow gun is designed to move high volume air in order to clean up wood chips, gravel and other debris found on heavy duty industrial & construction work sites. It has an adjustable handle, deadman trigger with cast aluminum body & extension with a safety tip. Force 5 meets OSHA standards and has a 3/4" FNPT inlet. XF-500A (3/4" NPT) $ Straight Metal Extension Fits on the N200, N201, N208 blow guns. N200E6 (6" no vent) N $ 7.89 N204E12 (12") N204E24 (24")

4 SAFETY BLO GUNS & AESSORIES Safety blow guns have safety tips which prevent the buildup of tip pressure in the event the outlet is obstructed (complies with OSHA B & requirements when used on an airline of 150psi or less). The safety tip has a hole to allow the air to vent. Auto 576 Standard Safety Gun N208* (1/4"FNPT) $ Replacement Safety Tip N209 $ 7.43 Trigger Blow Gun w/ Safety Star Tip (4" Long) This is a trigger control blow gun that is very quiet and permits fine control. N204-30ST B $ Air Duster Blow Gun This is an ergonomically designed blow gun for fine air dusting applications. It comes with a safety nozzle tip (replacement rubber tips available). The inlet is 1/4" FNPT. AR-009-S B $ AR-009-RB13* (rubber tip) 6.15 Air Duster Blow Gun w/ Adjustable Flow ontrol Tip This is the same as our AR-009, but has a threaded flow control tip. The inlet is 1/4" FNPT. AR-009-AA $ AR-009-RB13* (rubber tip) 7.48 Industrial Pocket Gun w/ Quick onnect N217*(Automotive) N $ 9.81 N219*(Industrial) 9.91 Tamper-Proof Tip Safety Gun These tamper-proof tips have a dampener that reduces outlet pressure. N204-30A (1/4"FNPT) B $ Air Duster Blow Gun Kit - 8pcs This is an ergonomically designed blow gun for fine air dusting applications. It comes with a regular tip, rubber tip, safety tip, adjustable tip, nylon tip, long needle tip, booster tip and an air screen tip. The inlet is 1/4" FNPT. AR-009-8K $ laflin High Volume Blow Gun This is a heavy duty, 1/2" NPT blow gun with a capacity of psi (3" long nozzle). It is used in various mills or industrial areas where an ordinary blow gun does not provide enough flow. The OSHA approved safety tip has relief holes in the event the nozzle is blocked. Standard XP-200A (Alum) $ XP-200B (Bronze) OSHA Approved XP-300A (Alum) XP-300B (Bronze) Body/Valve Only XP-100A (Alum) N N omplete Aluminum Unit XP-100A Valve Handle Only omplete Bronze Unit $ $ Air Vacuum & Blower Kit This can be used for blow-off, cleaning, vacuuming, cooling, or drying a range of debris, swarf, fibers, and liquids in shops, labs, or plants. It is suitable for lightweight objects like sand, abrasives, cuttings, sawdust, shavings, drops of water, etc. It can quickly be changed from vacuum to blower by turning the rear adapter. This kit contains a 1" diameter blow gun, a filter bag, 3 nozzles, and 2 extension tubes. The inlet is 1/4" FNPT. G-800K* $ * Packaged for retail display.

5 MINIATURE AIRLINE VALVES Throttle Valve (1/4"NPT) 943 Lever Valve (1/4"NPT) 943 These allow for fine control of flow from These permit flow when the lever is depressed, and then flow stops after completely open to closed. release. N235 $ 6.96 N240 B $ Button Bleeder Valve (1/8" NPT) These permit flow when the button is depressed, and then flow stops after release. N711 $ 5.62 Standard Muffler/Silencer These diffuse air and muffle noise from the exhaust ports of air valves, cylinders, and tools to an acceptable level within OSHA noise requirements. The adjustable muffler can be utilized to change the amount of restriction. These can also be used as filters for many other fluids including oil. Filter element is 40 microns, max pressure psi (varies due to application/ temp), temp range -20 (-30 F) to 150 (300 F). They have a brass body (stainless also available, suffix -SS). NPT Size 1/8" MF18* B $ /4 MF28* A /8 MF38* B /2 MF48 B /4 MF68 B MF88 B Adjustable 1/4 MF28-ADJ B $ /8 MF38-ADJ Nylon Muffler/Silencer These offer greater flow with less pressure drop than the MF series. They incorporate a 50 mesh, self-cleaning, stainless screen with a tough nylon housing. Max pressure is 150 psi and temperature range is +35 F to 120 F. NPT Size 1/8" SQF-1 $ /4 SQF-2 B /8 SQF-3 B /2 SQF-4 B 7.66 AIR MUFFLERS/SILENERS, SNUBBERS & BREATHER VENTS Adjustable Breather Vents These are used for vacuum relief or pressure equalization on cylinders, gear boxes, oil tanks, or reservoirs. They prevent foreign particles from entering ports open to the atmosphere. The standard brass body filter element is 40 microns, while the all stainless body is 70 microns. Max pressure psi (varies due to application/temp), temp range -20 (-30 F) to 150 (300 F). Thread Size Brass NPT 1/8" ASP-1BV B 1/4 ASP-2BV B 3/8 ASP-3BV B 1/2 ASP-4BV B 3/4 ASP-6BV B 1 ASP-8BV B 316SS Stainless NPT 1/8" ASP-1BV-SS 1/4 ASP-2BV-SS 3/8 ASP-3BV-SS 1/2 ASP-4BV-SS 3/4 ASP-6BV-SS N 1 ASP-8BV-SS N Brass BSPT 1/8" ASP-1BV-BSP 1/4 ASP-2BV-BSP N 3/8 ASP-3BV-BSP N 1/2 ASP-4BV-BSP N 3/4 ASP-6BV-BSP B 1 ASP-8BV-BSP N $ $ $ N602-E-40 Viscous N602-E-30 Med Oil N602-E-25 ater N602-E-20 Low Visc N602-E-10 Air/Gas In-Line Pressure Snubber/Filter These protect pressure gauges and instruments from sudden shock/surges and allow for more accurate readings. These will also work as a mini-inline filter. Each unit comes with five different elements (10, 20, 25, 30, 40 microns) to allow each user to adjust snubbing capacity for the specific application (40 micron for heavy, viscous fluids). Maximum 10,000 psi and temperature range is +2 (+35 F) to +149 (300 F). MxF Part NPT Number Stk Pcs Pcs 1/4" N602 B $ $ /8 N Included oloured Elements (none) N602-E-40 (viscous) >500ssu Black N602-E-30 (med oil) ssu Brown N602-E-25 (water) ssu Green N602-E-20 (low visc) <30ssu Red N602-E-10 (air/gas) M 577