CCMR Lab Safety Room Orientation for Physical Sciences Building Cryo S/TEM Rm. B91 and BioTwin Rm. B71
|
|
|
- Wesley O’Connor’
- 6 years ago
- Views:
Transcription
1 CCMR Lab Safety Room Orientation for Physical Sciences Building Cryo S/TEM Rm. B91 and BioTwin Rm. B71 Mariena Silvestry Ramos, PhD PSB B88 Office Cell
2 Emergency Exits and Evacuation In the event of a building evacuation alarm or other emergency, immediately proceed to the nearest exit as outlined by the red boxes on the map. Exit immediately. There is one exit near B95 (liquid nitrogen storage and holder room) and two exits near the CryoS/TEM and BioTwin rooms. Additionally, the PSB Atrium and/or Clark Hall are places to exit and wait until the emergency has passed and it s safe to return.
3 Emergency Contact Info In case of emergency, dial from a campus phone. Mobile network signals are mostly inaccessible in the facility and immediate surrounding areas. Two telephones are available for emergency use only: Next to the Cryo S/TEM and BioTwin microscopes For non-emergency, urgent equipment issues, call the appropriate staff member using the number posted on the HASP signs on the doors In the event you have any further questions regarding the proper procedures, safety regulations, or other concerns, please contact one of the Facility Staff. The following contacts may be able to assist you: Keane Leitch, PSC Safety Manager kjl44@cornell.edu, 121 Baker Lab Todd Pfeiffer, PSC Facilities Director tap66@cornell.edu, 105 Weill Hall
4 Working in the CCMR Cryo S/TEM and BioTwin Labs Safety Training The following laboratory safety courses, offered on-line or in the classroom by Cornell University EH&S, are required to access the CCMR Cryo S/TEM BioTwin Labs. EH&S course numbers follow in parentheses for your reference. Please refer to (internal users) or (external users) for information on how to obtain training or verify your CULearn information. Required for access to the Cryo S/TEM and BioTwin Labs: EH&S training Laboratory Safety: EH&S training in Chemical Waste Disposal: EH&S training in Handling Cryogens: EH&S Radiation Producing Equipment Safety: #2555 Laboratory #2617 Chem Waste #3055 Cryogensfty #5033 EHS-RPE
5 Rules for using the CCMR Cryo S/TEM BioTwin facilities No wet chemistry is allowed in the lab. All samples must be prepared in your own lab. Do not bring hazardous samples or materials into the lab without prior consent/approval by the Facilities Manager. This is not a storage facility - you must take specimens when you leave. Anything leftover will be promptly disposed. Do not bring food or drinks into B-91 or B-71. Users failing to follow safety rules will be denied access to the lab. Wear proper PPE and follow safety rules when handling liquid nitrogen. Do NOT insert foreign objects into microscope computer (hard drives, thumb drives, chargers, etc); they contain viruses that will take damage the computer that operates the microscope. Ask about data transfer protocols before the start of your session
6 Instrument and sample holder sign up rules Sign ups for instrument time are done via Coral; users are encouraged to notify manager and/or lab members if sessions are finished early so as to maximize instrument use/time Specialty holders MUST be signed up for via: Any and all issues must be logged on the lab logbook and the Facilities Manager should be notified immediately. Failure to follow these procedures could result in cancellation of access to facilities Lab head/pi is liable for any non wear-and-tear repair costs incurred due to lab member(s) irresponsible handling/operating of holders Consultation with Facilities Manager is required prior to bringing any samples to the lab. Do not introduce new hazards or hazardous materials without express approval from facility staff To be up-to-date about instrument issues or downtime, please send an to the cryo STEM list:
7
8 CCMR Shared Facility Access Form (more information at Submit one form to each facility that you are requesting access to. 1) Print out this page. Illegible or incomplete forms may not be accepted. 2) Read the facility orientation completely. Required EH&S safety trainings for individual areas are listed below. Facility Duffield Hall Bard Hall Trainings A,F, and W required for access to all facilities Room Additional Trainings 150 CR Facility Room Additional Trainings F03 (Keck) (Prep) C Clark All D21, D22 C*G*M*U* Hall D15 (AFM) - B47/A/B C*L*U* D10 C*G*M* B55 G ST Olin B78 C B56 C 1158 CR Snee SB30 L 1102 R Hall SB56 & 58 R* 1149 (µprobe) R* *Required for specific activities, see facility orientation A C F G H L M R U W Safety trainings key Laboratory safety (#2555-laboratory) Cryogen handling (#3055-cryogensfty) Fire safety (#5330-firesafety) Compressed gas (#2335-compressed) Hazard communication (#2343-hazardcomm) Laser safety (#2397-lasersafety) Magnetic fields (#5035-magnetic) Radiation producing equipment (#5033 EHS-RPE) Fume hood (#3355-FumeHood) Chemical waste disposal (#2716-chemwaste) 3) Fill in user information below, sign and bring completed forms to the appropriate facility manager. User Name Cornell University ID card # NetID/ Status Department Advisor By signing below, I am attesting that I have read the facility orientation form and completed the necessary EH&S safety trainings. User Signature Date / / Office use: Door list entered by
Bard Hall Materials Facility Safety Orientation For rooms B47, B47A, B47B, B55, B56, SB30 Bard Hall
Bard Hall Materials Facility Safety Orientation For rooms B47, B47A, B47B, B55, B56, SB30 Bard Hall Dr. Mark Pfeiffer map322@cornell.edu 607-255-4161 Phil Carubia pmc228@cornell.edu 607-255-6757 Emergency
CCMR LAB SAFETY ROOM ORIENTATION BARD HALL SB56
CCMR LAB SAFETY ROOM ORIENTATION BARD HALL SB56 Don Werder B57 Bard Hall 505 412 9135 djw326@cornell.edu John Grazul 350 Duffield Hall 607 592 8989 jlg98@cornell.edu Policy: The safety rules for CCMR are
Nanoelectronics Lab, SR B14 Rules you must agree to follow for access
Rules you must agree to follow for access 1. Do not remove any tools or manuals from the lab. These must be kept in the lab for the lab to operate efficiently. 2. Do not remove any supplies. These are
Physical Sciences Complex User Orientation & Access/Key Request Form
Physical Sciences Complex Facilities Management Health & Safety 121 Baker Ithaca, New York 14853 p. 607.255.8773 e. KJL44@cornell.edu Physical Sciences Complex User Orientation & Access/Key Request Form
Developing Safety Guidelines for Cryogenic Liquids.
Developing Safety Guidelines for Cryogenic Liquids. Purpose: Develop a reference document that can be used by a Principle Investigator or a designee to assist in the development of Safety Operating Procedures
Standard Operating Procedure Porosity Analyzer - The Micromeritics Tri-Star II (surface area) with Micrometrics VacPrep 061 (Sample Degas System)
Standard Operating Procedure Porosity Analyzer - The Micromeritics Tri-Star II (surface area) with Micrometrics VacPrep 061 (Sample Degas System) The Micromeritics Tri-Star II Surface Area and Porosity
BIOSAFETY SELF AUDIT PRINCIPAL INVESTIGATOR/PERMIT HOLDER: CONTAINMENT LEVEL: 1 2 (Shaded) RISK GROUP: 1 2 AUDIT TO BE COMPLETED BY (DATE):
Page 1 of 5 BIOSAFETY PROGRAM BIOSAFETY SELF AUDIT PRINCIPAL INVESTIGATOR/PERMIT HOLDER: SELF AUDIT COMPLETED BY: LABORATORY ROOM NUMBER: CONTAINMENT LEVEL: 1 2 (Shaded) RISK GROUP: 1 2 DATE OF AUDIT:
LABORATORY HAZARD AWARENESS TRAINING
Open minds. Open doors. TM LABORATORY HAZARD AWARENESS TRAINING FOR NON LABORATORY PERSONNEL Objectives Hazard Awareness Be familiar with the hazards, warning signs and labels Protective measures PPE Training
Standard Operating Procedures
Standard Operating Procedures Laboratory Specific Biochemistry Shared Instrumentation Facility ForteBio BLItz: Biolayer Interferometer Department: Chemistry and Biochemistry Date when SOP was written:
UNH Department of Forensic Sciences
UNH Department of Forensic Sciences LABORATORY SAFETY RULES, PRACTICES AND AGREEMENT (Professors, Graduate Students, Research Assistants, Teaching Assistants, Students Working on Research Projects and
LABORATORY SAFETY. A general overview
LABORATORY SAFETY A general overview INTRODUCTION Environmental protection, Occupational Safety and Health are the Responsibility of all staff, students and collaborators working at ETH. OBJECTIVES General
STANDARD OPERATING PROCEDURE TEMPLATE
STANDARD OPERATING PROCEDURE TEMPLATE #1 CONTACT INFORMATION: Procedure Title Procedure Authors Impedance Analyzer User Protocol Yu-Hung Li & Sang Jong Kim Date of Creation/Revision 11-12-2011 Name of
DEPARTMENT SCHOOLS OF HEALTH. respiratory protection. Proper adherence to bloodborne pathogen handling protocols.
ANIMAL WORK: Work in laboratories, procedure rooms, surgery rooms and animal housing facilities containing animals. Refer to specific Animal Care Protocols. All lab workers who work in a lab conducting
Approved by Principal Investigator Date: Approved by Super User: Date:
Approved by Principal Investigator Date: Approved by Super User: Date: Standard Operating Procedure BNC OAI 200 Lithographic Mask Aligner (Aligner 3) Version 2011 June 2 I. Purpose This Standard Operating
Laboratory Safety Review Checklist One Shields Ave Davis, CA Phone: (530) Fax: (530)
http://safetyservices.ucdavis.edu Laboratory Safety Review Checklist One Shields Ave Davis, CA 95616 Phone: (530)752-1493 Fax: (530)752-4527 E-mail: ehsdesk@ucdavis.edu U C Davis Environmental Health and
Laboratory Safety Review Checklist One Shields Ave Davis, CA Phone: (530) Fax: (530)
http://safetyservices.ucdavis.edu Laboratory Safety Review Checklist One Shields Ave Davis, CA 95616 Phone: (530)752-1493 Fax: (530)752-4527 E-mail: researchsafety@ucdavis.edu U C Davis Environmental Health
CHEMISTRY FACULTY LABORATORY SAFETY CONTRACT CENTRAL CAMPUS
CHEMISTRY FACULTY LABORATORY SAFETY CONTRACT CENTRAL CAMPUS Potential hazards exist in all chemical laboratories and some can cause serious accidents. Fortunately, most accidents can be prevented if each
Laboratory Preparedness Checklists for Advanced Planning, Preparing to Close & Safe Re-Entry
Laboratory Preparedness Checklists for Advanced Planning, Preparing to Close & Safe Re-Entry Disruptions, utility outages, and severe weather events may require a laboratory closure. These events have
Lecture Demonstrations Safety Manual & New Staff Induction
Lecture Demonstrations Safety Manual & New Staff Induction Overview The lecture demonstrations team provides and maintains demonstrations to lectures, tutorials and outreach. Demonstrations and equipment
DEPARTMENT SCHOOLS OF HEALTH
PATIENT LIFTING: Work with patients/human subjects may involve lifting and moving of patients. Exposure to physical injury from lifting and moving of patients/human subjects. Avoid unnecessary exposures.
Approved by BNC Managing Director Paul Lum Date: Approved by PI (s) /Super User (s): _Peter Hosemann/Andy Minor_Date:
Approved by BNC Managing Director Paul Lum Date: Approved by PI (s) /Super User (s): _Peter Hosemann/Andy Minor_Date: Standard Operating Procedure BNC FEI Quanta 3D FEG/FIB ESEM Version 2011 Aug 30 I.
University of New Haven DEPARTMENT OF CHEMISTRY and CHEMICAL ENGINEERING
University of New Haven DEPARTMENT OF CHEMISTRY and CHEMICAL ENGINEERING A. Instructions: Student: Read carefully the following laboratory rules, safety precaution, and regulations. Your laboratory conduct
Department of Chemistry
[SKIDMORE COLLEGE] Department of Chemistry Laboratory Safety Handbook for Research Students and Lab Assistants Table of Contents Introduction... 1 Training and Documentation... 1 Laboratory Conduct and
TEMPLE UNIVERSITY A Commonwealth University Environmental Health & Radiation Safety (EHRS)
Page 1 of 8 TEMPLE UNIVERSITY A Commonwealth University Environmental Health & Radiation Safety (EHRS) Standard Operating Procedure (SOP) Bromodeoxyuridine (BrdU) Principal Investigator: Room & Building
Laboratory Safety Plan
Laboratory Safety Plan Introduction A laboratory safety plan is a document that describes the general rules of conduct and other information useful in helping to prevent laboratory incidents and to appropriately
UCSB SHOP WORKER SAFETY: TRAINING NEEDS ASSESSMENT and DOCUMENTATION
UCSB SHOP WORKER SAFETY: TRAINING NEEDS ASSESSMENT and DOCUMENTATION Completion and filing of this form for each supervisee is the responsibility of the shop supervisor. Instructions: Under CA law and
HPMI Policies and Procedures 2017
HPMI Policies and Procedures 2017 The High-Performance Materials Institute (HPMI) is a leading center in the materials R&D. HPMI consists of multidisciplinary professional researchers: students, staff
Standard Operating Procedures (v9 5/1/17)
Standard Operating Procedures (v9 5/1/17) Safe Working Practices for Cell Sorting on the Influx Table of Contents I. General Facility Information II. Facility Orientation and Training III. Approval to
TA/GA Occupational Health and Safety
TA/GA Occupational Health and Safety Faculty of Engineering & Architecture Science (FEAS) Presented by: Eric Ambroise Lab Safety Officer Agenda Intro to Health & Safety Ryerson EH&S Policy Rights & Responsibilities
Standard Operating Procedure
Standard Operating Procedure Chloroform This SOP is not complete until it has been signed and dated by the PI and relevant lab personnel. Print a copy and insert into your Laboratory Safety Manual and
Molecular Materials Research Center Beckman Institute California Institute of Technology
Molecular Materials Research Center Beckman Institute California Institute of Technology Long pants, and shirts that cover upper torso and upper arms are required. Safety glasses, lab coats, and gloves
Division of Research Safety (DRS)
Division of Research Safety (DRS) Safety Orientation August 21, 2014 Stephanie Tumidajski Hess Chemical Safety Professional DRS helps the campus community fulfill their laboratory goals (research, teaching,
STANDARD OPERATING PROCEDURE (SOP): URETHANE
TEMPLE UNIVERSITY A Commonwealth University Environmental Health & Radiation Safety (EHRS) STANDARD OPERATING PROCEDURE (SOP): URETHANE LABORATORY/USER INFORMATION Principal Investigator (PI): Phone #
Contractor/Visitor Safety Orientation UNBC
Contractor/Visitor Safety Orientation UNBC 3333 University Way, Prince George, BC V2N 4Z9 Revised: October 2015 For All Emergencies call Security 250-960-7058 ***DO NOT DIAL 911*** Important UNBC Telephone
Eric Sheagley, Lab Supervisor Fall, 2015
CH 107, Intro to Chemistry Lab Portland State University Eric Sheagley, Lab Supervisor Fall, 2015 Description: CH 107 is the laboratory associated with the CH 104 Intro to Chemistry lecture. Concurrent
Laboratory Personal Protective Equipment & Hazard Assessment Tool
Laboratory Personal Protective Equipment & Hazard Assessment Tool This form must be completed by the person in charge of the laboratory, with the guidance of the Chemical Hygiene Officer to conduct a laboratory
Instructions for Completing the UW-Madison Laboratory Chemical Hygiene Plan Template
Instructions for Completing the UW-Madison Laboratory Chemical Hygiene Plan Template This template is designed to provide an organizational framework for ensuring compliance with the OSHA Laboratory Standard.
Hydrogen Cyanide (HCN)
(HCN) H224 H300 H310 H330 H370 This SOP is not a substitute for hands-on training. Print a copy and insert into your laboratory SOP binder. Department: Chemistry Date SOP was written: Wednesday April 25,
Laboratory Emergency Response & Incident Reporting Guide. Occupational & Environmental Safety Office Duke University Health System.
Laboratory Emergency Response & Incident Reporting Guide Occupational & Environmental Safety Office Duke University Health System Quick Reference Revised 2016 Blood/Body Fluid Hotline From a Duke phone...
Spill response Procedure
Spill Response Procedure 1. Introduction A number of materials with the potential to be hazardous to the environment are used and stored at the University. This procedure defines the emergency procedures
Hazardous Materials Spill Response
Hazardous Materials Spill Response The University of Iowa Rev. 01/2019 Department: Lab/Room Number: PI/Lab Coordinator: After-hours Contact Number: University Public Safety - 911 Fire, Police, Ambulance
NPDGamma LH2 Target OJT Lesson Plan: Senior Operator for the NPDGamma LH2 Target Operators
0. Introduction Object of this on-the-job Training (OJT) Lesson Plan is to train Senior Operators for the NPDGamma LH2 target system. After successful of this OJT and authorization by line management Senior
Completed by: Anthony Jones (BE Design Laboratory Manager) Staff/Student number: School/Unit: BE Design Laboratory. Current version: V_01
OHS026 Safe work procedure Completed by: Anthony Jones (BE Design Laboratory Manager) Staff/Student number: 3205782 The Writing Safe Work Procedures Guideline (OHS027) should be consulted to assist in
ver #. (Indicate version number) (Current Date of Version)
University of Texas Health Science Center at San Antonio Standard Operating Procedures For (insert campus, building and room number) Laser Controlled Area ver #. (Indicate version number) (Current Date
Approved by Principal Investigator Date: Approved by Super User: Date:
Approved by Principal Investigator Date: Approved by Super User: Date: Standard Operating Procedure BNC OAI Lithographic Mask Aligner (Aligner 2) Version 2008 October 31 I. Purpose This Standard Operating
Usage Policies Notebook for Thermco Atmospheric Diffusion Furnace system
Usage Policies Notebook for Thermco Atmospheric Diffusion Furnace system Revision date September 2014 2 Emergency Plan for Diffusion Furnaces Standard Operating Procedures for Emergencies Contact information
WHAT YOU NEED TO KNOW ABOUT LABORATORY SAFETY AT LEHIGH UNIVERSITY
WHAT YOU NEED TO KNOW ABOUT LABORATORY SAFETY AT LEHIGH UNIVERSITY TABLE OF CONTENTS Your Health and Safety... 1 Instructor and Lab Supervisor Responsibilities... 2 Facility Safety... 2 Personal Safety
Open Water SCUBA Diving at Glendale Community College Syllabus PED101SU, Section Spring 2013
Open Water SCUBA Diving at Glendale Community College Syllabus PED101SU, Section 16077 Spring 2013 Class Room: Saturdays Jan. 19-Feb. 26 11:00-12:00 P2 Pool Dives: Saturdays Feb. 2-March 9 12:00-16:00
Biology Lab Safety Procedures and Information
Biology Lab Safety Procedures and Information Health and safety are paramount values in science classrooms, laboratories and field activities. You are expected to learn, understand and comply with ACC
MINIMUM SAFETY REGULATIONS
MINIMUM SAFETY REGULATIONS These rules are intended to apply to all students, postdoctoral fellows, and staff engaged in laboratory work in a working lab. A working laboratory is a room used for any purpose
University of Saskatchewan Department of Mechanical Engineering Standard Operating Procedure # Mat0002
Procedure Title: General Chemical Usage Guidelines Minimum Review Requirements: Annually Creation Date: November, 2011 Date of Next Review: November, 2012 Creator of Procedure: Authorized by: Title Page
Working with Cryogenic Liquids
Standard Operating Procedure (SOP) Working with Cryogenic Liquids BUILDING: PREPARED BY: ROOM: REVISION DATE: Experimental Process Brief Description of the Operation/Experiment: Specialized Training Instructions:
Standard Operating Procedure
Standard Operating Procedure Use of liquid nitrogen filling station Date: 02-12-13 SOP Title: Principal Investigator: Room and Building: Lab Phone Number: Section 1 Process Use of liquid nitrogen filling
Environmental Health and Public Safety. Graduate Student Safety Training
Environmental Health and Public Safety Graduate Student Safety Training INCIDENT AT DUKE UNIVERSITY Wednesday April 15, 1998 7.51 a.m. EDT Firefighters reported t the Gross Chemical Building after the
AOE DEPARTMENT SAFETY REVIEW FORM FOR EXPERIMENTAL WORKSPACES
AOE DEPARTMENT SAFETY REVIEW FORM FOR EXPERIMENTAL WORKSPACES Before experimental activities can begin in any room in the Department of Aerospace and Ocean Engineering, and at least once per year thereafter,
HAZCOMM & Lab Safety College of Dental Medicine Research Safety Specialist Environmental Health and Safety
HAZCOMM & Lab Safety College of Dental Medicine Specialist Environmental Health and Safety Purpose of Training Crucial for a safe work place Policy/procedures may vary Required by Occupational Safety &
Environmental Health and Public Safety. Graduate Student Safety Training
Environmental Health and Public Safety Graduate Student Safety Training Why Do We Care About Safety? >30,000 students/faculty/staff >1,000 research laboratories Chemical, Radiological, Biological Lasers,
Standard Operating Procedure (SOP) for (_Hydrpchloric Acid_)
Standard Operating Procedure (SOP) for (_Hydrpchloric Acid_) PI Name: Yat Li Date: 10/12/2012_ Name of Lab or Unit: PSB 198_ Review any applicable manufacturer/vendor safety information before developing
Hazardous Materials Spill Response
Hazardous Materials Spill Response The University of Iowa Rev. 02/10 Department Lab/Room Number PI/Lab Coordinator After Hours Contact Number University Public Safety (Phone 911) Fire, Police, Ambulance
Lab Practice and Safety Guidelines
RUBRIK Dokument ID Lab Practice and Safety Guidelines S-2016-0100 Fastställd av Fastställt datum Peter Unsbo 2018-04-08 Skapad av Gällande från Björn Hessmo 2018-04-08 Dokumentansvarig Version 1:e Fo.Ing.
UCSC Laboratory Standard Operating Procedure (SOP) Compressed Gas Cylinder Change for MOCVD and CVD Systems
UCSC Laboratory Standard Operating Procedure (SOP) Compressed Gas Cylinder Change for MOCVD and CVD Systems Department: Chemistry Date: 02/25/13 Principal Investigator: Yat Li Office Phone: Enter text.
The primary purpose of laboratory fume hoods is to keep toxic or irritating vapors out of the general laboratory working area.
Introduction Welcome to the Biosafety Cabinets and Fume Hoods Training Course (OHS_BIO304). This training is required for anyone that will be conducting work and/or research that requires the use of a
LABORATORY FUME HOOD SPECIFICATION AND MAINTENANCE PROGRAM
LABORATORY FUME HOOD SPECIFICATION AND MAINTENANCE PROGRAM Last Updated: Tuesday, January 31, 2006 1. INTRODUCTION AND SCOPE 2. RESPONSIBILITIES 3. USER GUIDELINES 4. SYSTEM DESIGN SPECIFICATIONS o The
COURSE SYLLABUS. Hazardous Waste Operations and Emergency Response. EPCT 1301 Number Lecture - Lab - Credit.
COURSE SYLLABUS Hazardous Waste Operations and Emergency Response EPCT 1301 Number 2-4 - 3 Lecture - Lab - Credit NONE Prerequisite This syllabus has been reviewed and is current on the date indicated.
Laboratory Safety. ALARA Practices Attire Hazards Electricity Radiation Fire Signage Emergency response
Laboratory Safety ALARA Practices Attire Hazards Electricity Radiation Fire Signage Emergency response Safety Is Everyone's Top Priority Use common sense, think, learn, and pay attention ALARA As Low As
ENVIRONMENTAL HEALTH AND SAFETY in the ARTS Department of Art and Design
ENVIRONMENTAL HEALTH AND SAFETY in the ARTS Department of Art and Design We are committed to a safe working and learning environment at GVSU Art and Design and to teaching those steps to pursuing a safe
TEM Lab Chemical Hygiene Plan
TEM Lab Chemical Hygiene Plan B63 Engineering Science Building 03 Health h 40 Flammability Flammabilit y LN2 0 Reactivity y Emergency Contact: Marcela Redigolo, Ph.D. Office: G75D Engineering Sciences
RUN TIME: 50 MIN PL02 Page 1 of 7 POGIL LAB EXERCISE 02 What Makes the Lab a Safe and Effective Place to Do Chemistry?
RUN TIME: 50 MIN PL02 Page 1 of 7 POGIL LAB EXERCISE 02 What Makes the Lab a Safe and Effective Place to Do Chemistry? Each member should assume their roles at this time (Table 1). Table 1. Group Member
WORKING WITH 3D PRINTER STANDARD OPERATING PROCEDURE. Only authorized users are allowed to handle, move, connect or touch 3D printers
WORKING WITH 3D PRINTER STANDARD OPERATING PROCEDURE Type of SOP: Process Hazardous Chemical Hazard Class 1. HAZARD OVERVIEW 3D printing is an additive manufacturing technology used in rapid prototyping
Safety Plan Report. Investigators Dimitris Argyropoulos. Emergency Contacts. Authorized Personnel Personnel Position.
Safety Plan Report Plan Number 143 Annual Approval 3/16/2010 Area BILTMORE HALL Approved 2/20/2009 Room 3103 Approval Notes Investigators Dimitris Argyropoulos Position Principal Investigator Home Phone
EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Use, storage and disposal of flammable liquids
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
Research Laboratory Hazard Assessment Tool For Personal Protective Equipment Use
Research Laboratory Hazard Assessment Tool For Personal Protective Equipment Use The University of Iowa Date(s) 04/2016 This form is used by the PI, Lab Supervisor or their designee to accomplish two requirements
Laboratory Standard Operating Procedure: Cryogenic Liquids
I. THIS STANDARD OPERATING PROCEDURE (SOP) IS FOR A: Specific laboratory procedure or experiment Examples: synthesis of chemiluminescent esters, folate functionalization of polymeric micelles, etc. Generic
CUNY ASRC Photonics Spectroscopy Facility User Policies
CUNY ASRC Photonics Spectroscopy Facility User Policies The Photonics Spectroscopy Facility (PSF) of CUNY Advanced Science Research Center is a multi-user facility and it is imperative that all users are
Magnet Safety Plan. Revised: September 2015 Office of Environmental Health and Safety University of New Hampshire. All rights reserved.
Magnet Safety Plan Revised: September 2015 Office of Environmental Health and Safety 2015 University of New Hampshire. All rights reserved. The most current version of this document can be found at: http://www.unh.edu/research/magnet-safety-0
MINT Lab and Safety Orientation
MINT Lab and Safety Orientation MINT CHP Chemical Hygiene Plan The handbook contains the MINT CHP. Please read it and once you have read it, please sign, date, and return acceptance policy. It illustrates
Laboratory Safety Inspection Checklist
Conducted By: Date of Inspection: Location: Safety and Risk Management Office Laboratory Safety Inspection Checklist Principal Investigator/Supervisor: General Lab Housekeeping A M S NO NA Comments Laboratory
Laboratory Standard Operating Procedure: Irritants
I. CONTACT INFORMATION Procedure Title Procedure Author Date of Creation/Revision: April 12, 2013 Name of Responsible Person Location of Procedure (The PI, Lab Supervisor, or Autonomous Researcher) (Building
New Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
Standard Operating Procedure Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES) - Thermo Scientific icap 6300
Standard Operating Procedure Inductively Coupled Plasma Optical Emission Spectrometer (ICP-OES) - Thermo Scientific icap 6300 The Thermo Scientific icap 6300 Inductively Coupled Plasma Optical Emission
SATEC COMPRESSION MACHINE Standard Operating Procedure
Andrew Sutherland Supervisor of Laboratory/Workshop Mechanical & Electrical Type of hazards (mechanical, electrical, chemical, biological or radiation) SATEC Hydraulic Compression Tester Room A13 Name
Safety & Class Contract
Safety & Class Contract Required of ALL High School Science Students I will:! Follow all instructions given by the teacher and/or in the lab handout.! Protect my eyes, face, hands, and body when involved
Photolithography. Operating Instructions
Photolithography Operating Instructions The PR used during this laboratory session will be Microposit S1813 (from Shipley). Make sure everyone is following the laboratory protocol. Wear lab coats, safety
Standard Operating Procedures (v5 5/1/17)
Standard Operating Procedures (v5 5/1/17) Safe Working Practices for Cell Sorting on the FACSJazz Table of Contents I. General Facility Information II. Facility Orientation and Training III. Approval to
Laboratory Standard Operating Procedure: Specimen Preservatives
I. THIS STANDARD OPERATING PROCEDURE (SOP) IS FOR A: Specific laboratory procedure or experiment Examples: Formalin, Formaldehyde, Caro-Safe, Alcohol. Generic laboratory procedure that covers several chemicals
Standard Operating Procedure
Standard Operating Procedure Propylene oxide This SOP is not complete until it has been signed and dated by the PI and relevant lab personnel. Print a copy and insert into your Laboratory Safety Manual
Chapter 4: Implementing Effective Exposure Controls
Chapter 4: Implementing Effective Exposure Controls Implementing effective controls to protect workers from health hazards requires attention and dedication. For example, equipment needs to be purchased,
2. Grades will be weighted as follows: Assignments 90% Quizzes: 10%
ME 236 Engineering Measurement and Data Analysis [Lab] Winter 2016 Week Topic Assignments Due at beginning of lab 1 Introduction to Read Intro to Measurement Practice in Lab Manual Measurement Submit Assignment
Centrifugation: High Speed Floor Centrifuges
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
Operations: HSE. Health and Industrial Hygiene. Laboratory Safe Work Practice
Operations: HSE Health and Industrial Hygiene Laboratory Safe Work Practice Page 2 of 8 AMENDMENT RECORD Amendment Date Revision Number Revision Number 08/11/2016 4 Authority: Health Manager Custodian:
Standard Operating Procedure (SOP)
INTRODUCTION This SOP applies to. FORMALDEHYDE exposure in Anatomy Lab will be monitored at the beginning of each semester dissections are performed. Environmental Health and Safety will perform monitoring
UCSC Laboratory Standard Operating Procedure (SOP) Precursor Bubbler Change for MOCVD Systems
UCSC Laboratory Standard Operating Procedure (SOP) Precursor Bubbler Change for MOCVD Systems Department: Chemistry Date: 02/25/13 Principal Investigator: Yat Li Office Phone: Enter text. Lab Safety Representative:
Standard Operating Procedure
Standard Operating Procedure Zinc powder This SOP is not complete until it has been signed and dated by the PI and relevant lab personnel. Print a copy and insert into your Laboratory Safety Manual and
Standard Operating Procedures for Hazardous Chemicals
Standard Operating Procedures for Hazardous Chemicals Title of Procedure: Flame AA Operation with Air/Acetylene Flame Date: March 29, 2011 Date of Last Review: 3/30/2012 Principal Investigator: B. D. Freeman
"LABORATORY SAFETY SERIES"
PRESENTER'S GUIDE "LABORATORY HOODS" Part of the "LABORATORY SAFETY SERIES" Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS OUTLINE OF MAJOR PROGRAM POINTS
Guide to Safety in the Science Classroom
ECC Health & Science Building Guide to Safety in the Science Classroom SC 1000 Laboratory Safety for Students East Central College 1964 Prairie Dell Road ~ Union, Missouri 63084 Phone: (636) 584-6500 ~
New Employee Safety Orientation
New Employee Safety Orientation Introduction Colleges are relatively safe places to work. However, workplace hazards do exist. Siena College, along with the NYC&URMG and., have created this New Employee
Ruptured Gas Cylinder Destroys Laboratory Hood at the University of Nevada
Ruptured Gas Cylinder Destroys Laboratory Hood at the University of Nevada The Incident: In September 2000, a steel lecture bottle located within a hood in a UNR laboratory ruptured with explosive force.
LABORATORY SAFETY INSPECTION
LABORATORY SAFETY INSPECTION DATE: P.I./LAB MANAGER(S): PHONE(S): DEPARTMENT: BUILDING: ROOM(S) INSPECTED: INSPECTOR(S): TIME IN: TIME OUT: TOTAL TIME: LAB TYPE: DISCIPLINE: General Laboratory Safety S