V230 VALVE OPERATING MANUAL
|
|
- Hilary Crawford
- 6 years ago
- Views:
Transcription
1 V230 VALVE OPERATING MANUAL S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 1 di 27
2 DOCUMENT REVISION REVISION NOTES DATE MAN0029 A BOZZA 19/06/98 MAN0029 B EMISSIONE S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 2 di 27
3 Index ¾ General Features Technical Specification 4 ¾ Dimension 5 ¾ Softening Function Schemes 6 ¾ Softening Version Schemes 7 ¾ Demineralisation Version Schemes 9 ¾ Variations of Use = Controller/Pilot Valves Connections 10 ¾ Injectors & Flow Controls 13 ¾ Components of Standard Base Valve 14 ¾ Standard Volume Version 15 ¾ Standard Filtration Version 16 ¾ Duplex and Demineralisation Valve Version 17 ¾ Table for Controllers Selection 18 ¾ Automatic Remote By-pass for Softners & for Filter 19 ¾ Automatic Remote By-pass Components 20 ¾ Automatic By-pass Function 21 ¾ Chlorine producer Components 22 ¾ Tips and Suggestions 23 ¾ Spare Parts Kit 24 ¾ Accessories and Spare Parts 25 ¾ Intervention of ordinary maintenance 26 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 3 di 27
4 GENERAL FEATURES "V230" valves are the essential elements in building the following systems: a) simplex, duplex or multi-tank softening (decalcification) systems for domestic, laboratory and industrial use; b) simplex or duplex demineralisation and dealkalisation systems for laboratory and industrial use and all other uses requiring water with characteristics of guaranteed quality; c) simplex or duplex filtering systems for all of the previous applications. The valves are made with materials that guarantee utmost resistance and quality. They are available with a vast range of controllers for every operation phase of service and regeneration, starting from the simplest electronic basic controller with weekly clock to the sophisticated electronic controllers in various models which enable volume, volume-time control and salinity control in MicroSiemens/cm, etc. In the electronic systems, all the intervention times of operation phases can be programmed in relation to system type and dimension. For specific controller features, see the relative manual. TECHNICAL SPECIFICATIONS Operating pressure From 1.5 to 6 bar Maximum water flow with load loss of 1bar US gpm UK gpm See Table 1 for value variables - Backwash water flow max US gpm 11 Slow rinse water flow 0.44 to 2.65 US gpm 0.16 Fast rinse water flow (down-flow) max US gpm Static resistance to pressure 22 bar Maximum quantity of regenerative resin 200 l. Operating temperature From 5 to 40 C Materials of main components ABS+FV Tank connection 4 Input output attachments 2 gas male PRESSURE DROP For cod. 494-* see page 24 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 4 di 27
5 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 5 di 27
6 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 6 di 27
7 SOFTENING VERSIONS SCHEMES A) Duplex softening scheme with two brine measure valves, slow rinse,3v output valve. 5 pilot valve controller. B) Duplex softening scheme with brine measure valve, slow rinse and automatic/dynamic device to determine brine-draw line. 5 pilot valve controller. 3V valve. C) Duplex softening scheme without slow rinse, (salt-brine container fed separately), without brine-measure valve. 5 pilot valve controller. 3V valve. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 7 di 27
8 SOFTENING VERSIONS SCHEMES E) Duplex softening scheme with slow rinse (Salt/brine container fed separately) without brinemeasure valve. 7 pilot valve controller. 3V valve. F) Duplex softening scheme without slow rinse (Salt/brine container fed separately) Two output valves "A" and "B". 5 pilot valve controller. Without brine measure valve. G) Duplex softening scheme with slow rinse (Salt/brine container fed separately) Two output valves "A" and "B". 7 pilot valve controller. Without brine measure valve. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 8 di 27
9 DEMINERALISATION VERSIONS SCHEMES H) Demineralisation scheme without valves for slow rinse, 5 pilot valve controller.attention! Dissuaded application I) Demineralisation scheme with valves for slow rinse, 7 pilot valve controller.attention! Application Recommended S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 9 di 27
10 VARIATION OF USE Duplex softening connections referring to schemes A, B, C page 7. Duplex softening connections referring to schemes F page 8. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 10 di 27
11 Duplex softening connections referring to schemes E page 8. Duplex softening connections referring to schemes G page 8. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 11 di 27
12 Duplex demineralisation connections referring to schemes H page 9. Duplex demineralisation connections referring to schemes I page 9. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 12 di 27
13 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 13 di 27
14 COMPONENTS OF STANDARD BASE VALVE S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 14 di 27
15 STANDARD VOLUME VERSION S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 15 di 27
16 STANDARD FILTRATION VERSION S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 16 di 27
17 DUPLEX AND DEMINERALISATION VALVE VERSION S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 17 di 27
18 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 18 di 27
19 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 19 di 27
20 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 20 di 27
21 AUTOMATIC BY-PASS FUNCTIONS Proportional automatic by-pass functions consist in performances that facilitate system service with the following functions: a) delivery of untreated water during regeneration phases; b) partial delivery of water under use and service when withdrawals momentarily are higher than normal; Example: a momentary increase in water consumption creates a drop in pressure after the softening tank. The drop in water pressure as it comes out of the softener causes the automatic by-pass valve to open partially, making up for the increased demand. c) the by-pass has a mixer which, regulated to system functioning, obtains a residual hardness value in treated water in conformity with norms. d) in the event the system is equipped with a chlorine producer, it is advised to use a BVRPOD by-pass with incoming and outgoing withdrawal, so as to perform the checks set out in DPR 443. e) the by-pass makes it possible to exclude the valve or the entire system without interrupting water delivery. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 21 di 27
22 CHLORINE PRODUCER FUNCTIONS The chlorine producer is characterised by the possibility to automatically sterilise resin with each regeneration. For this function, of course, the valve must be equipped with the appropriate "cloro" electronic timer. This controller feeds electrically, during the phase of regeneration 2C, the cell electrolytic, producing so for the duration of the phase chlorine or is mixtures. The duration of the phase 2C rule so the quantity of chlorine that is necessary for the sterilisation of the resins. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 22 di 27
23 PRECAUTIONS IN DISASSEMBLING "C" COLLECTOR In disassembling the "C" collector, unscrew the screws slowly to avoid gripping between materials and screws. Before remounting, carefully clean the hole and screws. Insert the screw in the hole and by hand, slowly turn it in direction "A" until reaching the beginning of the thread, then turn the screw in direction "B," still by hand, without forcing it. Using a screwdriver, slowly screw in direction "B" until tight; do not force. Always perform these operations using normal screwdrivers; do not use automatic screwdrivers. MODIFICATION TO PERFORM IN CASE OF DAMAGE TO THREADED HOUSING OF "F" SELF- THREADING SCREWS If during disassembly and reassembly of the "C" collector, the threads of the "F" screw housing, make a hole as indicated in "E," using a flat or squared large-grain file, 3 or 4 mm thick. Insert a 3M nut in this hole and replace the "F" screws with M3 "D" screws of the proper length (minimum 15 mm). S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 23 di 27
24 SPARE PARTS KIT RIF. CODE DESCRITION k valve bodi service kit k volume valve bodi kit k demineralisation valve bodi kit Piston service kit a Piston cover 3b b Piston cover winth 1/8 threaded hole 4-59-a External inlet-outlet port o-ring Pilot assembly r Injector red n Injector black g Injector grey a Drain manifold 7a c Closed drain manifold Motive assembly connections S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 24 di 27
25 ACCESSORIES AND SPARE PARTS Ref. Code Description A-05 valve cap with o-ring B-05 valve cap with o-ring and 1-8" g hole A Chlorine producer, ø 3-8" M/M B Chlorine producer, ø 3-8" F/M B PVC connection kit, 2"x1¼" C PVC connection kit, 2"xISO F Brass connection kit, 2"x1½" S 2 gas 1 ¼ npt pvc connection kit Complete turbine body ½" turbine water meter Conductivity sensor A Anti-corrosion retaining valve, black (NaOH) K Antiacid retaining valve, red (HCl) Temporised brine filling device Pin regulator V132 internal maintenance kit S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 25 di 27
26 INTERVENTIONS OF ORDINARY MAINTENANCE drawback cause corrective action leakage from drain during the service Hardness escape To the exit It doesn't inhale brine leakage from the pilot Leakage from external command pilot leakage of her valve through the system of the pistons probable leakage between entrance and exit O-R on the kept ac/bc lack of pressure obstruction pre filter over pilot. obstruction perforate injector. problems to the brain tank 1) - to close water in entrance 2) - to close water in exit. 3) - to detach the tube of connection between the pilot and the drain collector. 4) - to remove the three screws that keep down the collector code 022 page. 9. To remove the two O-R 058 page. 9 and to replace them with two diskettes in soft rubber, thickness around 2mm. Or closing the passage with a thin sheet of plastic. 5) - to reassemble the collector 022, tightening the three screws taking care not to force. 6) - to reopen the inlet and the outlet of the water. Completed the procedure, if the leakage to drain has disappeared, the drawback is due to the pilot. In this case it s necessary a substitution. If the leakage persists, the cause could be owed to a leakage of the chambers of the main cylinders. To identify the defective chamber, to proceed as to the 4 point, to close only one of the two O-R 058 beginning from the left one. the same operation will be effected, eventually, also for the right chamber. The indication of what chamber is defective is the disappearance of the leakage, in relationship to the closed side of the pilot. To eliminate the defect, it is necessary to take a part the defective chamber, proceeding as below: a) to -close water inlet and outlet b) to -unscrew the cap of the defective chamber using the special tool or seeger pliers. The maintenance kit contains the right tools for the interventions of maintenance. c) - to remove the stem of the pilot of the side related to the chamber. d) - to extract the piston with a pliers, take out the inside pivot. e) -to -verify that there are not scratches or other damages on the stem of the piston. f) -if evident defects are not found on the piston, to unscrew the blockage ferrule of the spacer package, and to verify the state of the O-R pag.9. If there isn't damage, it s advisable to replace all the gaskets O-R, verifying carefully the state of all. In the case to proceed is necessary to the complete removal of the spacer package, take care at the moment of the reassembly, to check the exact position page. 9. Also this may be detected through a simple test: 1) Disconnect, in service position, pressure connectors 2 and 4 alternatively. 2) In case some water should leak from one of the pressure connectors from the pilot body, it means that the related pilot has some leaks and must be replaced. If the leakage is not due to the pilots, its cause has to be ascribed to a possible leakage of valve piston. In the case the leakage is found to originate only from the collector of draining, it is possible to determine easily in what chamber / piston there is the leakage. 7) -if the water of leakage to drain is hard water, it is due probably to the O-R of the ferrule 012 ( ), inlet side, page. 9. Phase service pag.7. 8) - if the water of leakage to drain it results soft water, to replace the third O-R after the ferrule, page. 7 phase service. To effect this intervention, to proceed as suitable to the point 6 paragraphs a,b,c,d,e,f. 9) -to extract the piston of the entrance, to check that there are not damages evident on the surface. if the piston results damaged, to replace it. Otherwise I would replace the first O-R departing from the end of the stem piston (entered). Page. 7 and 9. to effect this intervention, to proceed as suitable to the point 6, paragraphs a,b,c,d,e,f. 10) - to remove the valve from the cylinder, to replace the O-R 046 that it operates the estate between the top column and the pipe of the down column. 11) -to close the entrance to the valve, verifier that the manometer points at one non inferior pressure to 2 bar, if it results inferior, the pressure is insufficient. 12) - if to the point 11 the pressure is superior to 2 bar, to check the state of stoppage of the mechanical filter, installed to the entry of the plant. To get off it and to polish up. If after this operation the problem has not resolved, to proceed with the point ) -to remove the collector 022 page. 9, to extract the filter 018 and to polish up it carefully, therefore to proceed to the point ) -to remove the injector 060 page. 9, to polish up the holes of the same carefully and to reassemble everything. 15) -if after this actions, the problem has not been eliminated, proceed to an accurate control of the complex connections and brine tank : g) -to check that there are not obstructions in the system of connection. h) -to check that the pole of the craft forced toward the lower part, disburses water. i) -to check that the salt of the container, is not become hard. j) verify that the brine valve works in all regularly its components, doesn't have leakage on some terminal or link. S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 26 di 27
27 S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 27 di 27
V230 VALVE OPERATING MANUAL
V230 VALVE OPERATING MANUAL S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0021 Rev. B Pag 1 di 24 DOCUMENT REVISION REVISION NOTES DATE MAN0029 A BOZZA 19/06/98 MAN0029 B EMISSIONE
V240-FE VALVE OPERATING MANUAL
V240-FE VALVE OPERATING MANUAL S.I.A.T.A. srl Società Italiana apparecchiature trattamento acqua MAN0030 Rev. B Pag 1 di 29 Documento Revisione Nota di revisione Data MAN0030 A Bozza 19.06.98 MAN0030 B
USE AND MAINTENANCE MANUAL V360
USE AND MAINTENANCE MANUAL V360 S.I.A.T.A. S.r.l Società Italiana apparecchiature trattamento acqua MAN0031 BOZZA Pag. 1 of Document Revision Revision note Date MAN0031 A Draft S.I.A.T.A. S.r.l Società
USE AND MAINTENANCE MANUAL V260
USE AND MAINTENANCE MANUAL V260 S.A.T.I.A. srl Società Italiana apparecchiatura trattamento acqua MAN0034 BOZZA Pag. 1 di 21 DOCUMENT REVISION REVISION NOTE DATE MAN0034 DRAFT S.A.T.I.A. srl Società Italiana
WARNING! Equipment for treatment of water intended for human consumption (Directive 98/83 CE).
WARNING! Equipment for treatment of water intended for human consumption (Directive 98/83 CE). The equipment must be used only for the utilization for which they have been designed, as shown in the technical
Easy Nest Kits. Installation Suggestions
Easy Nest Kits Installation Suggestions 2 General Recommendations Hydraulics Vacuum breakers should be installed to prevent siphoning. Flexible connectors should follow FRP tank manufacturers recommendations.
DRS4-RM Manual. Set Up Instructions for DRS4 Series Single Tank
Set Up Instructions for DRS4 Series Single Tank Inspect the packaging of the equipment to confirm that nothing was damaged during shipping. (Figure 1) Remove the resin tank(s) and valve(s) from the packaging.
User's Manual. MixRite TF 10. Edition 05.08
User's Manual MixRite TF 10 Edition 05.08 1 Tefen MixRite TF 10 fertilizer and chemicals Injector Congratulations on your purchase of one of Tefen s high quality products. To get the best results from
Performa Cv Twin Alternating and High Flow Systems. Manual Supplement
Performa Cv Twin Alternating and High Flow Systems Manual Supplement Table of Contents 1.0 Installation and Start-Up.............. 3 Water Line Connection Brine Tank Turbine Connection Connecting Manifold
Model VR6 System. Installation, Operation & Maintenance
Model VR6 System Installation, Operation & Maintenance General: All Archer Instruments chlorination systems are carefully designed and tested for years of safe, accurate field service. All Archer Instruments
AQUAMATIC EASY NEST KITS INSTALLATION SUGGESTIONS
AQUAMATIC EASY NEST KITS INSTALLATION SUGGESTIONS TABLE OF CONTENTS TABLE OF CONTENTS...2 GENERAL RECOMMENDATIONS...2 TROUBLESHOOTING GUIDE...3 EXISTING EASY NEST SYSTEM TROUBLESHOOTING GUIDE...4 COMPONENT
Prestige Water Equipment Ltd.
The Prestige range of water softeners complements the range of water pre-treatment products and services. Use of water softening minimises the problems caused by hard water scale such as reduced heat transfer
Pressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
Application and Sizing
Application and Sizing Energy accumulator: It is improbable that an hydraulic system use all of its capacity without interruptions. An hydropneumatic accumulator can store a certain amount of fluid that
INSTALLATION & START-UP INSTRUCTIONS. Clack WS1 & WS1.25 METER WATER SOFTENER SYSTEMS
INSTALLATION & START-UP INSTRUCTIONS Clack WS1 & WS1.25 METER WATER SOFTENER SYSTEMS 1999-2009 QualityWaterForLess.com - 1 - info@qualitywaterforless.com Preface: Thank you for your purchase of a new Water
TECHNICAL DATA CAUTION
Page 1 of 6 1. DESCRIPTION The Viking Model D-2 Accelerator is a quick-opening device, with an integral anti-flood assembly, used to increase the operating speed of a differential type dry pipe valve.
Latvin Luxury Shower Panel. Telephone Product Specification. ~ Minimum Working Pressure 1.0 bar ~ Maximum Working Pressure 3.
Product Specification ~ Minimum Working Pressure 1.0 bar ~ Maximum Working Pressure 3.0 bar Latvin Luxury Shower Panel ~ Fixing Centres 150mm +/- 10mm ~ Outlet size 1/2" Bottom Outlet Always maintain a
Installation and Instructions 2. Product Features 3-6. Key Pad Functions 7. Distributor Information Programming Guide 8. Master Programming Guide 9-14
Installation and Instructions 2 Product Features 3-6 Key Pad Functions 7 Distributor Information Programming Guide 8 Master Programming Guide 9-14 Dimensional Drawing 15 D-STC & D-SMM Valve Assembly 16-17
Duplex Commercial Softeners
Duplex Commercial Softeners Installation, Operation & Maintenance Guide Manual 003.1 Contents Page 1. Unpacking Instructions 3 2. Installation 4 Pre-installation checks Fitting the bottom distribution
Anti-flood device Model B-1
December 4, 2009 Dry Systems 123a 1. DESCRIPTION The Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET
Commercial Softeners. Installation, Operation & Maintenance Guide. Manual 002.1
Commercial Softeners Installation, Operation & Maintenance Guide Manual 002.1 Contents Page 1. Unpacking Instructions 3 2. Installation 3 Pre-installation checks Fitting the bottom distribution system
FOR INSTALLING CO 2 BLENDER KIT (P/N IN BEER SYSTEM
IMI CORNELIUS INC One Cornelius Place Anoka, MN 55303-623 Telephone (800) 238-3600 Facsimile (612) 22-326 INSTALLATION INSTRUCTIONS FOR INSTALLING CO 2 BLENDER KIT (P/N 111612000 IN BEER SYSTEM SECONDARY
Pressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
Instructions for SILEX 1C Mixed bed cartridge filter
D01B-30A-UK1 January 2017 Instructions for SILEX 1C Mixed bed cartridge filter With conductivity sensor Gravity flow or pressure installation SILHORKO-EUROWATER A/S Phone +45 86 57 12 22 DK-8660 Skanderborg
Installation Operation Maintenance. Bermad Level Control Valve with Modulating Horizontal Float Pilot valve One Way Flow IOM.
Bermad Level Control Valve with Modulating Horizontal Float Pilot valve One Way Flow Model: FP 450-80 Installation Operation Maintenance PAGE 1 OF 5 1. Safety First BERMAD believes that the safety of personnel
RG1200 Service and Repair Manual
Dive Rite RG 1200 Regulator Service and Repair Manual Page 1 Text and Photography by Pete Nawrocky Copyright ( ) 1999-2000, Lamartek, Inc., dba Dive Rite RG1200 Service and Repair Manual First Stage.........................................
THE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv)
THE BP-301 SERIES Operating and Service Manual Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) Issue B October 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation...
Scald Protection Three-Way Thermostatic Mixing Valve
CALEFFI www.caleffi.com 383.04 Scald Protection Three-Way Thermostatic Mixing Valve Copyright 00 Caleffi 3 Series Installation, commissioning and servicing instructions Function Scald Protection Three-Way
Filling valves AL, ALM Series Automatic filling units ALOMDIW, ALOMDNW Series
Filling valves AL, ALM Series Automatic filling units ALOMDIW, ALOMDNW Series Main features Designed for automatic filling of sealed heating systems and for protection of the water mains from risk of contamination.
Operation Manual. Carbon Filtration Industrial Drive, Orlinda, TN fax
Operation Manual Carbon Filtration 615-654-4441 sales@specialtyh2o.com 615-654-4449 fax TABLE OF CONTENTS Section 1 GENERAL 1.1 Warnings and Cautions... 1 1.2 Theory of Operation... 2 1.3 System Illustration...
TECHNICAL DATA ACCELERATOR MODEL E-1
Page 1 of 10 1. PRODUCT DESCRIPTION The Viking Model E-1 Accelerator is a quick-opening device. When installed with the required external Anti-flood Device, the assembly is designed to increase the operating
Maintenance Manual. Liquid Level Transmitter CT801-SI, CT801-TA
CT801-SI, CT801-TA Maintenance Manual SAS au Capital de 2 158 244-444 871 933 R.C.S. Bourges - APE : 2651B Headquarter : 9, rue Isaac Newton - 18000 Bourges - France Maintenance Manual CT801-SI, CT801-TA
RD(H)20/25 Pressure-Reducing Regulator User Manual
RD(H)20/25 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be
Pilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
Art PRESSURE REDUCER
FUNCTION ICMA pressure reducers are devices that reduce and stabilize the incoming pressure from the water supply. Pressure reducers allow correct use on domestic systems, reducing malfunctions due to
Instruction Manual O-Ring Ejector Chlorine & Sulfur Dioxide to 500 PPD (10 kg/h)
Instruction Manual O-Ring Ejector Chlorine & Sulfur Dioxide to 500 PPD (10 kg/h) 100 PPD (2 kg/h) Maximum 250 PPD (5 kg/h) Maximum 500 PPD (10 kg/h) Maximum - 1-122.6006.9 These instructions describe the
TECHNICAL DATA. Q = C v P S
Page 1 of 13 1. DESCRIPTION The Viking 6 Model G-6000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler
Installation Instructions
Installation Instructions S65-135 (Circular) S65-136 (Semi-Circular) Air Valve Retrofit For Non-Sectional Classic Washfountain Table of Contents.......................2-6 Metering Air Valve Parts List....................6
RHPS Series RD(H)F40 User Manual. Read the complete manual before installing and using the regulator.
RHPS Series RD(H)F40 User Manual Read the complete manual before installing and using the regulator. 2 WARNING Before removing a regulator from the system for service, you must depressurize system purge
TECHNICAL DATA ANTI-FLOOD DEVICE MODEL B-1 1. DESCRIPTION
Page 1 of 6 1. DESCRIPTION The Model B-1 Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET condition,
Installation and Maintenance Manual. ECO Filtration Unit with 6-way-Top-Mount-Valve. Art. Nr
Installation and Maintenance Manual ECO Filtration Unit with 6-way-Top-Mount-Valve Art. Nr. 300100 300101 300102 Important Details: - Using of this filtration unit for swimming pools and its guard band
THE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301
THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...
RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
TECHNICAL DATA. Page 1 of 12
Page 1 of 12 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking Model H or J Flow Control
Instruction Manual - Diaframless TM Ejector Chlorine, Sulfur Dioxide and Ammonia
Instruction Manual - Diaframless TM Ejector Chlorine, Sulfur Dioxide and Ammonia - 1-122.6010.6 These instructions describe the installation, operation and maintenance of the subject equipment. Failure
Installation and operating manual. Pneumatic control station LK product no: PCS 1-10
LK product no: PCS 1-10 Article no: 74503 Revision:8 Article no: 74503 Revision: 8 2 (23) Contents 1. General information... 5 2. Safety precautions... 5 2.1 Significance of symbols... 5 2.2 Explanatory
TECHNICAL DATA. Q= Cv S
Page 1 of 13 1. DESCRIPTION The Viking 4 inch Model G-4000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry
PRO SINK -R 1 and 2. Dilution system CONTENTS
PRO SINK -R 1 and 2 Dilution system CONTENTS 1.0 Product description 2 2.0 Warnings.. 3 3.0 Installation procedure 4 4.0 Plumbing connections 4 5.0 Technical features.. 5 6.0 Maintenance... 6 7.0 Troubleshooting......6
12S 1st Stage. -Maintenance Procedure-
12S 1st Stage -Maintenance Procedure- 1 Warning! All maintenance and repair procedures MUST be performed by a Mares authorized Service Center and/or Distributor. Therefore, the information provided below
Chlorinator MODEL MK-I
Chlorinator MODEL MK-I The New model MK- I is semi automatic gas type. Vacuum operated Solution feed Chlorinator designed to provide a continues & measured quantity of gas while in operation. It is suitable
TECHNICAL DATA. Pressure Regulation 531a. April 24, 2009
April 24, 29 Pressure Regulation 531a 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
D05 Pressure Regulating Valves
D05 Pressure Regulating Valves FEATURES PRODUCT DATA Noncorroding unitized cartridge contains all working parts and is easily replaceable. Includes built-in strainer and thermal bypass. Balanced seat construction
Instruction Manual. Alfa Laval SB Membrane Sample Valve ESE02963-EN Original manual
Instruction Manual Alfa Laval SB Membrane Sample Valve ESE02963-EN2 2016-02 Original manual Table of contents The information herein is correct at the time of issue but may be subject to change without
Serie ECO 3T. Threaded end back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection E U R O P E
Serie ECO T Threaded end back flow preventer with controllable reduced pressure zone BRANDONI made in E U R O P E Application fields WATER FIRE FIGHTING DRINKING WATER 74 www.brandoni.it Serie ECO T The
TECHNICAL DATA CAUTION
Page 1 of 12 1. DESCRIPTION The Viking Model C-2 Pilot Pressure Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
Scald Protection 3-Way Thermostatic Mixing Valve
383.06 www.caleffi.com Scald Protection 3-Way Thermostatic Mixing Valve Copyright 06 Caleffi 3 Series Installation, commissioning and servicing instructions Function Scald Protection Three-Way Thermostatic
Type PRX/120, PRX/125, PRX-AP/120, PRX-AP/125, PRX/181, PRX/182, PRX/131 and PRX-AP/131 Pilots
Instruction Manual 0006EN-PRX-IM PRX Series July 2008 - Rev. 00 Type PRX/120, PRX/125, PRX-P/120, PRX-P/125, PRX/1, PRX/2, PRX/131 and PRX-P/131 Pilots summary Introduction... 1 Characteristics... 1 Labelling...
TECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13
Page 1 of 13 1. Description The Viking 2 Model G-2000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler
AP100 series ph/redox (ORP) cartridge sensors with water-wash option
ABB MEASUREMENT & ANALYTICS INSTRUCTION MANUAL IM/AP100 REV. D AP100 series ph/redox (ORP) cartridge sensors with water-wash option Measurement made easy AP100 series ph/redox (ORP) cartridge sensors For
TECHNICAL DATA Q= C. Table 1 - Specifications
September 25, 2013 Pressure Regulation 537a 1. Description The Model B-3 Pilot Operated Pressure Control Valve is a factory assembled unit. The unit consists of a Model J-2 Halar coated Flow Control Valve,
AIR-OPERATED DOUBLE DIAPHRAGM PUMP USER S MANUAL
00, 0, 000 00, 000, 00 A. TECHNICAL INFORMATION Model 00 Inlet/Outlet " Air Inlet /" 0 / 000 /" /" 00 /" /" 000 /" /" 00 /" /" Flow Rate GPM/ 0LPM GPM/ 0LPM GPM/ LPM GPM/ LPM GPM/ 0LPM GPM/ 0LPM Maximum
The ultimate in water softening
Calming troubled waters Metered Water Softener Specification MODEL: CALSOFT M The ultimate in water softening Due to Calmag s commitment to new product development the photographs contained within these
RB70 Automatic Diluent Valve Maintenance Manual. Version 1.1 November 2006 Written by Tino de Rijk. Page 1 of 23
RB70 Automatic Diluent Valve Maintenance Manual Version 1.1 November 2006 Written by Tino de Rijk Page 1 of 23 Table of Contents 1. Introduction... 3 2. ADV diagram and parts list (Pre June 2006)... 4
INSTALLATION & START-UP INSTRUCTIONS FLECK 9100SXT METER TWIN ALTERNATING WATER SOFTENER SYSTEMS
INSTALLATION & START-UP INSTRUCTIONS FLECK 9100SXT METER TWIN ALTERNATING WATER SOFTENER SYSTEMS 1999-2007 QualityWaterForLess.com - 1 - info@qualitywaterforless.com Preface: Thank you for your purchase
Installation Instructions
Installation Instructions COLONY SOFT 7.0 Single Control Lavatory Faucet with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect drain, a feature found
PROPORTIONING VALVE. Model 150 INSTRUCTION MANUAL. March 2017 IMS Company Stafford Road
PROPORTIONING VALVE Model 150 INSTRUCTION MANUAL March 2017 IMS Company 10373 Stafford Road Telephone: (440) 543-1615 Fax: (440) 543-1069 Email: sales@imscompany.com 1 Introduction IMS Company reserves
SpectraPure PUMPED RO SYSTEMS (PSP) User s Manual for PSP-1500 Systems
SpectraPure PUMPED RO SYSTEMS (PSP) User s Manual for PSP-1500 Systems 2 3 PSP-1500 SYSTEM DESCRIPTION Reverse Osmosis RO Reverse Osmosis utilizes the unique properties of a semi-permeable membrane to
RCV-125 REMOTE CONTROL SYSTEM IMPORTANT WARNING FOR SAFER BLAST CLEANING
OWNER S MANUAL RCV-125 REMOTE CONTROL SYSTEM IMPORTANT WARNING FOR SAFER BLAST CLEANING 1. Use protective equipment: Abrasive-resistant clothing, safety shoes, leather gloves, ear protection, CE-approved
Installation and commissioning instructions 255 series and 256 series
Installation and commissioning instructions 255 series and 256 series Table of contents 1 General information... 3 1.1 About these instructions... 3 1.2 About this product... 3 1.3 Appropriate usage...
Assembly Drawing: W-311B-A01, or as applicable Parts List: W-311B-A01-1, or as applicable Special Tools: , , &
REDQ Regulators Model 411B Barstock Design Powreactor Dome Regulator OPERATION AND MAINTENANCE Contents Scope..............................1 Installation..........................1 General Description....................1
NORMAL OPERATING DISPLAYS GENERAL OPERATION
SunTapWat e rsys t e ms WS1Cl ac kwat e rsof t ne r Owne r smanual MAIN COMPONENTS Your water treatment system is a point of entry (POE) system composed of three components: A. The control valve and computer
TECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY
Page 1 of 13 1. DESCRIPTION The Viking 3 Model G-3000 Dry Valve Riser Assembly is equipped with a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry
Training. Testor Training Manual
Training Testor Training Manual Index Section 1 Introduction and Safety Warnings Section 2 Test Procedures Section 3 Test Hoses Section 4 Fault Location 1:1 1.1 Introduction The Dräger Testor test equipment
Multi-Probe Sampling System User Guide & Manual
Multi-Probe Sampling System User Guide & Manual Rev. 06/05/12 Part #22200012 Table of Contents CHAPTER 1: SYSTEM DESCRIPTION... 2 FUNCTION AND THEORY... 3 SYSTEM COMPONENTS... 4 CHAPTER 2: SYSTEM INSTALLATION...
MAINTENANCE PROCEDURE FOR X 650
MAINTENANCE PROCEDURE FOR X 650 X 650 25. juli 2005-1/6 MAINTENANCE PROCEDURE FOR X 650 2 ND STAGE WARNING: This maintenance procedure is only for appointed Scubapro technicians that completed a course
Installation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
Installation Troubleshooting Maintenance Instructions Installation / Start-up
Model ZW207 Installation Troubleshooting Maintenance Instructions Installation / Start-up NOTE: Flushing of all pipe lines is to be performed to remove all debris prior to installing valve. 1. For making
TECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 348a 1. Description Viking supervised Surefire Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated Viking G-6000P Valve comes complete
CAT Course Trust Your Water
CAT Course Trust Your Water Introduction Kinetico features and softened water benefits Cocurrent and countercurrent regeneration Check the correct installation Field Analysis Installation instructions
TECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 333a 1. Description Viking supervised Surefire Preaction Systems Utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated Viking G-3000P Valve comes complete
Welker Sampler. Model GSS-1. Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Sampler Model GSS-1 The information in this manual has been carefully checked for accuracy and is intended to be used as a guide to operations. Correct
TECHNICAL DATA. Table 1 - Specifications
Page 1 of 6 1. DESCRIPTION Model A-3 Pilot Operated Pressure Control Valves are factory assembled units. Each unit consists of a Model H-2 Halar coated Flow Control Valve, a Speed Control Valve, a Model
TECHNICAL DATA. Q = C v P S
Preaction 346a 1. Description The 6 Model G-6000P Electric Release Preaction System Riser Assembly can be used as a Single Interlock Preaction System with Electric Release, or as a Double Interlock Preaction
TECHNICAL MANUAL 4'' END PORT PRESSURE VESSEL. Lenntech. Tel Fax.
4'' END PORT PRESSURE VESSEL TECHNICAL MANUAL Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 1 Introduction BEL, founded in 1966, specializes in the design and manufacture
265 Series Valve Operation Manual
265 Series Valve Operation Manual Note: 1. Read all instructions carefully before operation. 2. Avoid pinched o-rings during installation by applying (provided with install kit) NSF certified lubricant
Installation Instructions
Installation Instructions COLONY SOFT 7.0 Centerset Lavatory Faucet 7.0 with Speed Connect Drain Congratulations on purchasing your American Standard faucet with the Speed Connect drain, a features found
TECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 347a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated
Chemical Injection Technologies Installation/Service Bulletin
Bulletin 4002 Chemical Injection Technologies Installation/Service Bulletin SUPERIOR Series CL-16/26/56 Automatic Switchover Gas Chlorinator - Installation & Operation IMPORTANT!! READ THESE PRECAUTIONS
Anderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent
VRPP 170 Pressure regulating valve by pneumatic control
Last update: 02/11/2011 VRPP 170 Pressure regulating valve by pneumatic control Pressure regulating valve. At gun shut off, the water flow is bypassed at reduced pressure. Technical manual: E 246 DN 25
BS Series Basket Strainer
BS Series Basket Strainer Operating, Installation, & Maintenance Manual Corrosion Resistant Fluid and Air Handling Systems. Dated 04-26-12 PRESSURE DROP SIMTECH strainers are engineered to offer the lowest
Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for the installation, operation, and
CARTRIDGE FILTERS TECHNICAL MANUAL MT 080. Installation, commissioning and maintenance instructions. 08/02 Edition
CARTRIDGE FILTERS TECHNICAL MANUAL MT 080 Installation, commissioning and maintenance instructions 08/02 Edition 1 2 CONTENTS 1.0 PAGE INTRODUCTION 1.1 MAIN FEATURES 1.2 OPERATION 1.3 CLOSING OF HEAD WITH
OPERATION MANUAL NTF-60 Plus
OPERATION MANUAL NTF-60 Plus Nitrogen Tire Filling Valve Stem Caps (Qty=200) Order P/N 436075 RTI Technologies, Inc 10 Innovation Drive York, PA 17402 800-468-2321 www.rtitech.com 035-81264-00 (Rev A)
VRPP 200/280 Pressure regulating valve by pneumatic control
Ultimo aggiornamento: 20/04/18 VRPP 200/280 Pressure regulating valve by pneumatic control Technical manual: E 270 The Valve, fed by compressed air, maintains the pressure steady throughout the circuit
TECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 331a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated
Mixers. Venturi proportional mixers EMM & EMMTR (E2351 rev /07/2017)
Mixers Venturi proportional mixers EMM & EMMTR (E2351 rev. 04-11/07/27) GENERAL WARNINGS: DISPOSAL: ¾ All installation, maintenance, ignition and setting must be performed by qualified staff, respecting
DS05C,D,G Dial Set Pressure Regulating Valves
DS05C,D,G Dial Set Pressure Regulating Valves APPLICATION The Honeywell DS05C,D,G Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure
PARTS, SERVICE & REPAIR BULLETIN
WH4C PARTS, SERVICE & REPAIR BULLETIN 400 SERIES HEAVY DUTY WELDING HANDLE Manual No: 0056-3763 Issue Date: October 07, 03 Revision: AA VictorTechnologies.com Table of Contents SECTION : GENERAL SAFETY
GRUNDFOS alldos product information. Vaccuperm 111 / 113. Vacuum gas dosing systems for chlorine gas, ammonia, sulphur dioxide and carbon dioxide
GRUNDFOS alldos product information Vacuum gas dosing systems for chlorine gas, ammonia, sulphur dioxide and carbon dioxide Construction and function Modular system Vacuum regulator for direct mounting