Pressure relief valve DHV 718
|
|
- Christiana Warner
- 6 years ago
- Views:
Transcription
1 Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless and low vibration control behaviour high reproducibility of the set pressure simple pressure setting possible at any time, also during operation Application chemical plants industrial plants water treatment electroplating plants Intended Use The pressure relief valve which is directly controlled by the medium, is used in technical processing plants for keeping preset working pressures constant on the primary side. The pressure relief valve can also be used as an overflow valve to prevent pressure peaks. In this case, the pressure relief valve is fitted in a bypass line. Pressure relief valves are not safety valves according to the Pressure Equipment Directive. Valve Function When the valve is closed in the position of rest, the diaphragm under the valve seat is only impinged by the low secondary pressure. Any rise in working or primary pressure lifts the diaphragm against the spring force. The valve opens and the pressure decreases. Valve Setting. Remove the protection cap (DN 0 DN 50).. Undo the counter nut on the adjustment screw. 3. Turn the adjustment screw clockwise (pressure increase) until the desired set pressure or opening pressure is reached. Application Media Neutral and aggressive fluids or fluids containing solid particles, provided that the valve components coming into contact with the fluids are resistant at the operating temperature in accordance with the ASVresistance guide. For nitric acid or sulfuric acid please specify the precise operating conditions of the application. Fluid Temperature see pressure/temperature diagram Operating Pressure see pressure/temperature diagram Set Range DN 8 DN 5: 0,5 0 bar DN 0 DN 50: 0,5 8 bar Nominal Pressure (H O, 0 C) PN 0 Working Pressure set pressure plus flow dependent pressure increase (see characteristic curves). Opening Pressure DN 8: 0,5 bar DN 0 50: 0,3 bar Hysteresis Difference between opening and closing pressure approx. 0.3 bar Valve Body DN 8: PVCU, PP or PVDF DN 0 50: PVCU, PP or stainless steel VA Bonnet PP, glass fibre reinforced Diaphragm PTFE ( diaphragm with PTFE coating on the surfaces coming into contact with the medium) Sealing FPM Screws stainless steel (.30) Actuation medium controlled Connection refer comments on the identification numbers Flow Direction always in the direction of the arrow Mounting Position as required Fastening via threaded inserts (metal inserts) in the valve body > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
2 Colour body: PVCU, grey, RAL 70 body: PP, grey, RAL 703 body: PVDF, opaque, yellowishwhite bonnet: orange, RAL 00 valve body: stainless steel, unpainted Attention When the valve is in the position of rest, the counterpressure (secondary pressure) may be approx. times higher than the set pressure pe, the valve remains closed. > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
3 Pressure relief valve DHV 78 Ident code Settingrange and option A = standard ident no. ( digits) B = ident code for settingrange C = ident code for»washed free of silicone«a = ident code»0«not washed free of silicone b = Ident code»«washed free of silicone example c = ident no. / setting = 0,5 bar / not washed free of silicone example d = ident no. / setting =,0 bar / not washed free of silicone example e = ident no. / setting = 0 bar / washed free of silicone > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de 3
4 Pressure relief valve DHV 78 Pressure/temperature diagram Sectional drawing DHV 78, DN 8 A = primary side B = secondary side = adjustment screw 3 = counter nut 5= diaphragm 7 = valve seat A = primary side B = secondary side = protection cap = adjustment screw 3 = counter nut 5= diaphragm 7 = valve seat P = operating pressure T = temperature The pressure/temperature limits are applicable for the stated nominal pressures and a computed operating life factor of 5 years. These are standard values for harmless media (DIN 03), to which the valve material is resistant. For other media please refer to the ASV resistance guide. The durability of wear parts depends on the operating conditions of the application. > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
5 Pressure relief valve DHV 78 Applications A = generation of a constant working pressure B = use at high inlet pressure C = optimal solution for the reduction of pressure surges with overflow valve to protect the system Malfunctions, possible causes, rectification Maintenance note Screw tightening torque (Nm) The specified values apply to lubricated screws. Check the tightening torque of the body screws at certain intervals in case of setting of the diaphragms and/or temperature fluctuations. Operating note Please take into account that the material PTFE is classified as resistant against many media, however, PTFE is not diffusion tight when used as a film, e.g. for the ASV membranes. Please contact us for limit cases (nitric acid or sulfuric acid). > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de 5
6 Pressure relief valve DHV 78, [d] body PVCU size d(mm) pressure range DN(mm) 8 DN(inch) / PN(bar) 0 Connection sealing ident No. PVCU 7030 socket DIN FPM kg body PP size d(mm) pressure range DN(mm) 8 DN(inch) / PN(bar) 0 Connection sealing ident No. PP 70 socket DIN FPM kg body PVDF size d(mm) pressure range DN(mm) 8 DN(inch) / PN(bar) 0 Connection sealing ident No. PVDF 70 socket DIN FPM kg > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
7 Pressure relief valve DHV 78, [d] dimensions d(mm) DN(mm) DN(inch) 8 / dimensions(mm) d H h L L L3 M v M 5 3 > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de 7
8 Pressure relief valve DHV 78, [d d3] body PVCU size d(mm) pressure range DN(mm) DN(inch) 3/8 / 3/ / / PN(bar) Connection sealing ident No. PVCU socket DIN FPM PVCU spigot fix DIN 0. kg kg 0. kg kg PVCU socket ANSI FPM kg 0.5 kg PVCU socket JIS FPM kg 0.5 kg PVCU female thread Rp FPM kg 0.5 kg PVCU female thread NPT FPM kg.97 kg PE spigot DIN FPM kg A female thread Rp FPM GFR flange DIN PP / steel flange ANSI 0.70 kg 0.73 kg kg kg.35 kg 89. kg.3 kg.3 kg.35 kg.38 kg.3 kg.5 kg kg 79.8 kg.0 kg 89. kg.0 kg. kg.0 kg. kg. kg. kg 7. kg kg 3. kg kg 3. kg 3. kg 3. kg 3.5 kg 3.7 kg.0 kg kg kg 3. kg kg 3.8 kg 3.7 kg 3. kg 3.70 kg 3.7 kg.0 kg 7.0 kg kg 3.85 kg kg 3.90 kg 3.89 kg 3.9 kg 3.9 kg.03 kg.8 kg kg kg 8 > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
9 Pressure relief valve DHV 78, [d d3] body PP size d(mm) pressure range DN(mm) DN(inch) 3/8 / 3/ / / PN(bar) Connection sealing ident No. PP socket DIN FPM kg 0.57 kg PP spigot DIN FPM PP spigot fix DIN GFR flange DIN PP / steel flange ANSI kg 0.3 kg kg kg kg PP female thread Rp FPM kg 0. kg.0 kg. kg kg 703. kg kg.0 kg. kg.8 kg 90.0 kg 70.5 kg 70.0 kg. kg 3. kg 3.3 kg kg kg 7.08 kg 3.9 kg 3. kg 3.7 kg 90.9 kg kg 7.8 kg 3. kg 3.0 kg 3.5 kg kg kg kg 3. kg body A.57 size d(mm) pressure range DN(mm) DN(inch) 3/8 / 3/ / / PN(bar) Connection sealing ident No. A.57 female thread Rp A.57 female thread NPT 7.70 kg kg 73.0 kg 77.0 kg kg kg 75.0 kg 77.0 kg 7.70 kg kg 77.0 kg 77.0 kg 78.0 kg kg > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de 9
10 Pressure relief valve DHV 78, [d d3] dimensions d(mm) DN(mm) DN(inch) 0 3/8 0 5 / 5 0 3/ / 50 0 / 3 50 dimensions(mm).57 PP/PVCU.57 PP/PVCU PP PVCU GFR PP / steel GFR PP / steel GFR PP / steel GFR PP / steel d Rp NPT H H h h L L L L L3 L t d d D D K K M b b l N v 3/ M / M / M M 07 0 / M / M M > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
11 Pressure relief valve DHV 78 Item Overview DN 8, PVCU, PP, PVDF DN0DN50, PVCU, PP position quantity designation valve body bonnet pressure plate spring plate pressure spring pressure spring steel ball diaphragm socket head cap screw washer hexagon nut hexagon nut hexagon bolt Oring union end union nut position quantity designation valve body bonnet diaphragm disc pressure plate spring plate pressure spring steel ball steel ball diaphragm hexagon bolt hexagon bolt hexagon nut hexagon nut washer washer hexagon bolt protection cap Oring union end union nut protection cap protection cap > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
12 Pressure relief valve DHV 78 DN0DN50, A (.57) position quantity designation valve body bonnet diaphragm disc pressure plate spring plate pressure spring steel ball steel ball diaphragm hexagon bolt hexagon nut washer hexagon bolt protection cap protection cap > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
13 Pressure relief valve DHV 78 Characteristic curves Pressure loss curve (standard values for HO, 0 C) Operating behaviour ΔP = pressure loss Q = flow Pressure loss and kv The diagram shows the pressure loss in relation to the flow Q. Conversion aid: cv = kv x 0.07; fv = kv x Units: kv [l/min]; cv [gal/min] US; fv [gal/min] GB pe = set Pressure pö = opening pressure ps = closing pressure pö ps = hystersis pe pa = flow dependent pressure reduction Q = flow Configuration example The valve is set tight at 5 bar. A flow of approx. 000 l/h is reached at a pressure increase of bar. According to the curve, this results in the following values: set pressure pe: 5 bar; working pressure pa: bar; opening pressure pö: 5.5 bar; closing pressure ps: 5 bar > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de 3
14 Pressure relief valve DHV 78 DN 8 DN 0 Q = flow DN 0 Q = flow DN 5 Q = flow DN 5 Q = flow DN 3 Q = flow Q = flow (HO, 0 C) > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
15 Pressure relief valve DHV 78 DN 0 Q = flow (HO, 0 C) DN 50 Q = flow (HO, 0 C) > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de 5
16 Pressure relief valve DHV 78 > data sheet no.: // ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D30 Vlotho Tel. +9(0) Fax +9(0) contact@asvstuebbe.de
Pressure relief valve DHV 725 set range: 0,2-10,0 bar
Pressure relief valve DHV 75 set range: 0, - 0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level
More informationPressure relief valve DHV 716 set range: 0,5-10,0 bar
Pressure relief valve DHV 7 set range: 0,5-0,0 bar Advantage pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
More informationPressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
More informationPressure Relief Valve DHV 718
Pressure Relief Valve DHV 718 Nominal size DN 8 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 0.5 to 10 bar diaphragm controlled pressure relief valve simple design,
More informationPressure Reducing Valve DMV 750 set range: bar
Pressure Reducing Valve DMV 750 set range:.0-6.0 bar Advantage pressure setting possible at any time, also during operation hermetically sealed by valve diaphragm high level of operating safety and long
More informationPressure Reducing Valve DMV 755 set range: 1,0-9,0 bar
Pressure Reducing Valve DMV 755 set range:,0-9,0 bar Advantage pressure setting possible at any time, also during operation high reproducibility of the set pressure high level of operating safety and long
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationPressure Relief Valve DHV 718
Advantages frictionless components low maintenance low pressure increase up to fully opened valve constant low vibration controlling hermetically sealed by diaphragm for oscillating pumps for viscous media
More informationBody Material: PVC, PP, PVDF Bonnet Material: Glass Filled PP Size: ½ - 2 Pressure Rating: 150 psi Set Pressure: 4 to 150psi Seals:
Pressure Relief Valve Body Material: PVC, PP, PVDF Bonnet Material: Glass Filled PP Size: ½ - Pressure Rating: 50 psi Set Pressure: to 50psi Seals: EPDM, FPM, PTFE Piston: PVC, PP, PVDF, PTFE Diaphragm:
More informationPressure Reducing Valve DMV 750
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Pressure Reducing Valve DMV 750 Advantages reduction
More informationPressure Reducing Valve
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Advantages high reproducibility of setting pressure
More informationAeration and vent valve BE 891
Aeration and vent valve BE 89 Advantage high level of operating safety and long service life low-maintenance can be easily connected to the pipework by proven technologies - solvent or fusion welding Application
More informationDiaphragm pressure gauge guard MDM 902
Diaphragm pressure gauge guard MDM 90 Nominal size DN 0 5 Pressure PN 10 bar Features Pressure measurement up to 10 bar EPDM diaphragm with PTFE coating on the side in contact with the medium Reliable
More informationPressure relief valve
Pressure relief valve Operating manual Series DHV 712 R Version BA-2016.01.19 EN Print-No. 300 472 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0
More informationPressure relief valve
Pressure relief valve Operating manual Series DHV 718 Version BA-2016.01.11 EN Print-No. 300 524 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0
More informationpressure reducing valves
pressure reducing valves The function of a pressure reducing valve A pressure reducing valve is installed in-line. It is responsible for maintaining the downstream line pressure to the pressure set at
More informationSTAINLESS STEEL OVERFLOW VALVE TYPE 417
MAIN CHARACTERISTICS The 417 valve is intended for the discharge of fluids overflow when an upstream limitation of pressure is looked for, for example downstream to a pump. This valve also works in presence
More informationInstruction presentation Special valves
Instruction presentation Special valves 1 Special Valves 2 Special Valves Index of contents 1. Overview special valves 2. Description Gauge Guard 3. Description Water Jet Pumps 4. Description Venting and
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25
Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating
More informationModular valve block. Operating manual Series MVB 100/200. Version BA EN Print-No TR MA DE Rev001
Modular valve block Operating manual Series MVB 100/200 Version BA-2016.04.20 EN Print-No. 300 627 TR MA DE Rev001 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0
More informationRS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.
RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationSeries 44 Self-operated Pressure Regulators. Type 44-0 B Pressure Reducing Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-0 B Pressure Reducing Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT to 1 NPT as well as NPS ½ and 1 Pressure
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES INC. VALVES, INC HYDRAULIC CONTROL VALVES WORKING PRINCIPALS It is automatic hydraulic control valve designed for make desired modulation processes in main valve network line as
More informationFlowmeter. Original operating manual DFM
Flowmeter Original operating manual Series DFM 165 350 Version BA-2016.08.09 EN Print-No. 300 458 TR MA DE Rev002 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 32602 Vlotho Germany Phone: +49 (0) 5733-799-0
More informationITT RICHTER CHEMIE-TECHNIK
ITT RICHTER CHEMIE-TECHNIK The Answer to Corrosion Series MV/MVP Operating Manual for Diaphragm Valves Contents 1 General 2 Safety 3 Transport and storage 4 Product description 5 Installation 6 Operation
More informationSerie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
More informationRegulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More informationInstruction Manual SB02, SB03, SB04 All metal flow limiter
Instruction Manual SB02, SB03, SB04 All metal flow limiter PKP Prozessmesstechnik GmbH Borsigstraße 24 D-65205 Wiesbaden-Nordenstadt Tel.: ++49-(0)6122-7055-0 Fax: ++49-(0)6122-7055-50 Email: info@pkp.de
More informationOverflow valves Type OFV REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3 Features...........................................................................................
More informationMounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Type Type Differential Pressure Regulators (opening)
Self-operated Pressure Regulators Type 42-20 Type 42-25 Differential Pressure Regulators (opening) Translation of original instructions Type 42-20 Differential Pressure Regulator Type 42-25 Differential
More informationDifferential Pressure Regulator Type Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN
Differential Pressure Regulator Type 45-6 Type 45-6 (0.1 to 1 bar, DN 15) Mounting and Operating Instructions EB 3226 EN Edition March 2008 Contents Contents Page 1 Design and principle of operation...................
More informationPressure independent control valve (PICV) FLOWMATIC
Pressure independent control valve (PICV) FLOWMATIC 145 series FM 21654 003 01262/19 GB replaces dp 01262/17 GB Function The pressure independent control valve is a device composed of an automatic flow
More informationBall valve. Operating instructions for series. Version BA Print-No TR MA DE Rev001
Ball valve Operating instructions for series Version BA-2016.02.05 Print-No. 300 587 TR MA DE Rev001 We reserve the right to make technical changes. Read carefully before use. Save for future use. ASV
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve
Series Self-operated Pressure Regulators Type -6 B Excess Pressure Valve Application Set points from 0.2 to 20 bar with valves G ½, G ¾, and G as well as DN, DN 2, DN 0, and DN 0 Nominal pressure PN 2
More informationNeotecha SAPRO - Aseptic sampling valve SV Installation, operation and maintenance instructions
Before installation these instructions must be fully read and understood 2 Safety Please read these instructions carefully. 2.1 General danger potential Not paying attention to this instruction Incautious
More informationAutomatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN
Data sheet Automatic Balancing Valve Pressure difference controller with integrated flow limiter AB-PM DN 40-100 Description AB-PM is ideal for staged installation and commissioning AB-PM is a combined
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationClean Regulator/Fluororesin Type
Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part
More informationOverflow valves Type OFV Type OFV-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 Type OFV-SS 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
More informationMounting and Operating Instructions EB 3009 EN. Self-operated Regulators. Type RS Check Valve (backflow protection)
Self-operated Regulators Type 42-10 RS Check Valve (backflow protection) Type 42-10 RS Check Valve (backflow protection) Mounting and Operating Instructions EB 3009 EN Edition December 2015 Definition
More informationSeries 44 Self-operated Pressure Regulators. Type 44-1 B Pressure Reducing Valve. Type 44-6 B Excess Pressure Valve. ANSI version
Series 44 Self-operated Pressure Regulators Type 44-1 B Pressure Reducing Valve Type 44-6 B Excess Pressure Valve ANSI version Application Set points from 3 to 290 psi (0.2 to 20 bar) with valves ½ NPT
More informationV5001P. Kombi-Auto Differential Pressure Control Valve. Product specification sheet
V5001P Kombi-Auto Differential Pressure Control Valve Product specification sheet Content Application...1 Special Features...1 Valve Efficiency...1 Technical Data...2 Construction...2 Materials...2 Method
More informationArmatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationTA-FUSION-P. NPT threads / ANSI flanges
TA-FUSION-P NPT threads / ANSI flanges Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P
More informationSTAINLESS STEEL LOW PRESSURE REDUCING VALVE LPRV ELITE
MAIN CHARACTERISTICS The stainless steel LPRV elite low pressure reducer is intended for the pressure reduction of the fluids such as water, air, clear liquids not in charge of and the compatible gases
More informationSelf Control Valves. User s Manual. Pressure Reducing Type (V182,V82) Pressure Relief Type (V185) Pressure Retaining Type (V186)
Serial No. H-V063-E-9 Self Control Valves Pressure Reducing Type (V182,V82) Pressure Relief Type (V185) Pressure Retaining Type (V186) Contents 1. Be sure to read the following warranty clauses of our
More informationDifferential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting
Data sheet Differential pressure and flow controller (PN 16) AVPQ - return mounting, adjustable setting Description AVPQ is a self-acting differential pressure and flow controller primarily for use in
More informationSeries 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) Type Type 42-28
Series 42 Self-operated Regulators Differential Pressure Regulators with Type 2424/Type 2428 Actuator (closing) and balanced Type 2422 Valve Type 42-24 Type 42-28 Application Differential pressure regulators
More informationKTM 50 (DN ) Installation, maintenance and operating instructions
52 762-306 09.2014 KTM 50 (DN 100-200) Installation, maintenance and operating instructions General High-performing and compact, these pressure-independent control valves for variable flow heating and
More informationMounting and Operating Instructions EB EN. Type Supply Pressure Regulator. with increased air capacity
Type 4708-45 Supply Pressure Regulator with increased air capacity Translation of original instructions Mounting and Operating Instructions EB 8546-1 EN Edition March 2016 Note on these mounting and operating
More informationPressure Regulator 133 / 233
Benefits Accurate regulation Exchangeable component technique Easy maintenance Suitable for HTB requirements DVGW-approval (DIN 3380/81, VP 200). Description The 133/233 regulator is a direct-acting, spring
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationRS(H)20, 25 USER MANUAL
RS(H)20, 25 USER MANUAL Read the complete manual before installing and using the regulator. WARNING Before removing a regulator from the system for service, you must depressurize system purge the system
More informationInstruction Manual. Standard Surge Eliminator. Standard X. Flushable X - X
Standard Surge Eliminator Standard 104052 - X Flushable 104053 - X - X Page 2 of 16 Issue: 2.3 Index Section 1.1 General Description 1.2 Operating Principle 1.3 Specification 1.4 Fitting Selection - Standard
More informationSTAD-D. Balancing valves Balancing valve for domestic water systems, DN Balancing valves
STAD-D Balancing valves Balancing valve for domestic water systems, DN 15-50 Balancing valves IMI TA / Balancing valves / STAD-D STAD-D The STAD-D balancing valve delivers accurate hydronic performance
More informationSteam Trap BK 15 (DN40, DN 50) Original Installation Instructions English
Steam Trap BK 15 (DN40, DN 50) EN English Original Installation Instructions 810682-03 1 Contents Page Important Notes Usage for the intended purpose... 4 Safety note... 4 Danger... 4 Attention... 4 Application
More informationPRS(TC)4,8 USER MANUAL. Read the complete manual before installing and using the regulator.
PRS(TC)4,8 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to
More informationRocker valve. Type Operating Instructions. Bedienungsanleitung Manuel d utilisation
Type 0127 Rocker valve 2/2 or 3/2-way solenoid valve 2/2 oder 3/2-Wege Magnetventil Vanne magnétique 2/2 ou 3/2 Operating Instructions Bedienungsanleitung Manuel d utilisation Contents 1 Operating Instructions...2
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Features? Suitable for
More informationOperating Instructions for Flow Restrictors. Model: REG
Operating Instructions for Flow Restrictors Model: REG 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...
More informationsafety shut-off Valve HON 703 / HON 704
safety shut-off Valve HON 703 / HON 704 Product information serving the gas industry worldwide Applications, characteristics, technical data Applications Main safety device in gas pressure regulating systems
More informationPressure reducing valves Index
Index General information page Introduction 506 General introduction 507 for a steam plant 509 Product information BSP thread page Brass 510 ; BSP female thread 511 ; BSP male thread 513 Stainless steel
More informationVALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2
INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2 Pressure Reducing Valve M2 - Operation and Installation - 1 - M2-13E-ENG FEBRUARY 2017 ÍNDICE PÁGINA 1 IDENTIFICATION PLATE LEGEND
More informationPressure regulating valves Types OFV, OFV-SS
Data sheet Pressure regulating valves Types OFV, OFV-SS OFV are angle-way pressure regulating valves, which have ajustable opening pressure and cover the differential pressure range ( P): 2-8 bar (29 116
More informationSSV-Actuator HON 673 (K 1a, K 2a)
SSVActuator HON 673 ( 1a, 2a) 673.20 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS EDITION 01/2017 Serving the Gas Industry orldwide 1. General Our leaflet 720.00 gives full information with technical
More informationHand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS
Data sheet Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations,
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationHand operated regulating valves Types REG-SA and REG-SB
Data sheet Hand operated regulating valves Types REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand operated regulating valves, which act as normal shut-off valves in closed position.
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationR133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder
More informationType Pressure Regulator. for increased air capacity. Fig. 1: Type Pressure Regulator. Mounting and Operating Instructions EB EN
Type 4708-45 Pressure Regulator for increased air capacity Fig. 1: Type 4708-45 Pressure Regulator Mounting and Operating Instructions EB 8546-1 EN Edition March 2010 Definition of the signal words used
More informationSelf-priming makes priming unnecessary Exhausts the air inside the suction pipe to suck up liquid. Air operated type.
Process Pump Series 3/5 Automatically Operated Type (Internal Switching Type)/Air Operated Type (External Switching Type) High abrasion resistance and low particle generation o sliding parts in wetted
More informationSeries V48. 3-Way Pressure Actuated Modulating Valves. Product Bulletin. Features. Pressure balanced design. Free movement of all parts
Series V48 -Way Pressure Actuated Modulating Valves Product Bulletin These Water Valves are especially designed for condensing units cooled either by atmospheric or forced draft cooling towers. They may
More informationType overview. R B2 en-gb subject to changes 1
Technical data sheet R30..-..-..-B2 Characterised control valve, 6-way, Internal thread Two sequences (cooling/heating) with one 90 rotary actuator Switching or modulating control on the water side of
More informationCAST IRON VALVES FLOAT VALVE
CAST IRON VALVES FLOAT VALVE NETAFIM CAST IRON VALVES FLOAT VALVE INLINE 25-400MM ANGLE 50-100MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged 50mm to 600mm & Threaded 19mm
More information2-port seat valves PN25 with externally threaded connections
4 379 2-port seat valves PN25 with externally threaded connections VVG55.. Valve body bronze CC491K (Rg5) DN 15...25 (½...1 ") kvs 0.25...6.3 m3/h Stroke 5.5 mm Sets of ALG.. with threaded and ALS.. with
More informationInstallation and Operating Instructions Bypass Flow Meter DST
Installation and Operating Instructions Bypass Flow Meter DST DST_gb_A4_1.0.doc Version 1.0 1 von 10 Contents 1. Foreword... 3 2. Safety... 3 2.1. Symbol and meaning... 3 2.2. General safety directions
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The EMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Features Suitable for
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationGas powered stop valves, type GPLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Gas powered stop valves, type GPLX 80-150 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Gas powered stop valves, type GPLX 80-150 Contents Page Introduction........................................................................................3
More informationSV5 Safety Valve Installation and Maintenance Instructions
3120036/3 IM-S13-12 CH Issue 3 SV5 Safety Valve Installation and Maintenance Instructions 1. General specification 2. Supply 3. Before fitting the valve 4. Installation 5. Damage prevention 6. Commissioning
More informationMaterials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
More informationSEries 29 Hydrant valves installation, operation & maintenance manual
Instruction for use Thank you for selecting an AVK product. With correct use, it will give long and reliable service. This manual has been prepared to assist you install, operate and maintain the valve
More informationMeasurement of Low GAS & Liquid Flows
Measurement of Low GAS & Liquid Flows The Measurement Measurement with a float in a tapered borosilicate glass tube. Series 2100 with a 100 mm flow tube Series 2150 with a 150 mm flow tube Series 2300
More informationTHE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More informationWATER PRESSURE REDUCER (SBD)
WATER PRESSURE REDUCER (SBD) December 2016 PRODUCTS Product Code Connection Size Range of Products Max. Input Pressure Pressure Setting Range 340308 1/4" SBD 340315 1/2" SBD 340415 1/2" with sleeve coupling
More informationPressure Reducing Valve for Steam Type 2333 A
Pressure Reducing Valve for Steam Type 2333 A Fig. 1 Type 2333 A 1. Design and principle of operation The pressure reducing valve consists of a balanced control valve and a closing actuator equipped with
More informationInstallation, Operating and Maintenance Manual Overflow Regulator Type 94/ 94 E
Installation, Operating and Maintenance Manual Overflow Regulator Type 94/ 94 E Table of content 1. General information on installation, operating and maintenance instructions 1.1 Hazard notices 1.2 Qualified
More informationPressure relief valves
Pressure relief valves Type DV700 Features Direct operated valve High degree of pressure stability Safe operation Precise pressure adjustment Maximum pressure setting with lock nut Applications as cartridge
More informationOPERATING INSTRUCTIONS
0/05 OPERATING INSTRUCTIONS for gas pressure regulators PN0 with integrated slam shut valve (SSV) and integrated limited capacity safety relief valve (RV) MR 25 F0, MR 25 SF0 p e 20 kpa - 0 MPa (0,2-0
More informationTBV-CM. Combined control & balancing valves for small terminal units For modulating control
TBV-CM Combined control & balancing valves for small terminal units For modulating control IMI TA / Control valves / TBV-CM TBV-CM Designed for use in terminal units in heating and cooling systems, the
More informationGas Pressure Regulator HON 300
Product information serving the gas industry worldwide Applications, characteristics, technical data Applications direct acting gas pressure regulator, for systems in accordance with DVGW working instruction
More informationfor Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity)
for Building facilities Industrial facilities etc.,multipurpose Pilot operated type(high capacity This is a Pilot operated pressure reducing valve. It is suitable to install in the steam lines with the
More informationR300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids
HELYON 5 Chemin du Jubin 69570 DARDILLY Tél. +33 (0)4 72 52 16 70 - Fax +33 (0)4 72 52 16 71 R300 Brass high pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet
More informationTECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS THE COMPANY ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
More informationTA-FUSION-P. Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics
TA-FUSION-P Combined control & balancing valves Pressure independent combined balancing and control valves with independent EQM characteristics IMI TA / Control valves / TA-FUSION-P TA-FUSION-P These innovative
More informationTECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution
More information