Operating and Maintenance Manual. Flowmeter

Transcription

1 Operating and Maintenance Manual Flowmeter w w w. a m i c o. c o m

2 Models FMX-XXY-XX(YY)* Gas O = Oxygen A = Medical Air ** Some restrictions apply LPM 02 = 200 CC 01 = 1 LPM 03 = 3.5 LPM 08 = 8 LPM 15 = 15 LPM 70 = 70 LPM Color Coding U = USA I = ISO Connection Type F2 = 1/8" FNPT DH = DISS Handtight DN = DISS Nut OM = Ohmeda Male CM = Chemetron Male PB = Puritan Bennett MS = Medstar OX = Oxequip BM = British Male GM = German Male (DIN) FM = French Male DO = DISS Outlet * Options PT = Power Takeoff -D = Dial -M = MRI Compatible** -S = Swivels CAUTION: United States federal law restricts this device to sale by or on the order of a physician. Read All Instructions Before Using This manual instructs a professional to install and operate the Flowmeter. This is provided for your safety and to prevent damage to the Flowmeter. If you do not understand this manual, DO NOT USE the Flowmeter and contact your provider. Safety Information - Warnings and Cautions WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. CAUTION: Used without the safety alert symbol ( avoided, may result in property damage. ) indicates a potentially hazardous situation, which, if not CONSULT ACCOMPANYING DOCUMENTS Symbol for USE NO OIL 1 Amico Patient Care Corporation

3 Receiving Inspection Remove the Amico Patient Care Corporation Flowmeter from the packaging and inspect for damage. If there is any damage, DO NOT USE and contact your provider. WARNING: To minimize the risk of explosion or fire: DO NOT use or store oils, greases, organic lubricants or any combustible materials on or near this Flowmeter DO NOT use near any type of flame or flammable/explosive substances, vapors or atmosphere DO NOT smoke in an area where oxygen is being administered Intended Use WARNING: Use Flowmeters only for their Intended Use as described in this manual. Specifications The Flowmeter is intended for use by physicians, respiratory therapists and other authorized hospital personnel to administer selected doses of medical gases to a patient. Flow Range Increments Accuracy Flood CC 25 CCM (Starts at 25 CCM) ± 20 CCM 500 CCM MAX 0-1 LPM 0.1 LPM (Starts at 0.1 LPM) ± 0.1 LPM 2.5 LPM MAX LPM (From to 1 LPM) LPM 0-8 LPM 0-15 LPM 0-70 LPM 0.25 LPM (From 1 to 3.5 LPM) 0.5 LPM (Starts at 0.5 LPM) 0.5 LPM (From 1 to 5 LPM) 1 LPM (From 6 to 15 LPM) 5 LPM (Starts at 10 LPM) Flood is the output of the Flowmeter when the flow indicator is beyond the highest calibrated graduation. The Flood range is as indicated on the Flowmeter labeling. Transport / Storage Requirements: -40 F to 140 F (-40 C to 60 C) ± LPM or ± 10% of Reading (whichever is greater) ± 0.5 LPM, or ± 10% of Reading (whichever is greater) ± 0.5 LPM, or ± 10% of Reading (whichever is greater) ± 0.5 LPM, or ± 10% of Reading (whichever is greater) The gas and inlet pressures are indicated on the Flow Tube or Flowmeter body. Note: Storage or transport outside the specified range may cause damage to the Flowmeter. 45 LPM MAX 50 LPM MIN 50 LPM MIN ± 10% of Reading 75 LPM MIN The above Flowmeter models are calibrated at a specified inlet pressure of 70 F (21 C) standard atmospheric pressure. International models are calibrated per specifications marked on Flow Tube or Flowmeter body. MRI WARNING: This product contains a magnetic, ferrous material that may affect the result of an MRI. 2

4 Operating Instructions WARNING: Read this User Manual before installing or operating the Flowmeter. CAUTION: Flowmeters must be operated with the Flow Tube in a vertical, upright position. CAUTION: Only personnel instructed and trained in its use should operate this Flowmeter. CAUTION: The Pediatric Models including CC and LPM contains a glass Flow Tube which is fragile. Special care should be observed to avoid breaking the Flow Tube. CAUTION: Inspect the Flowmeter for visual damage before use, DO NOT USE if damaged. 1. Turn Flowmeter off by turning knob fully clockwise. CAUTION: Overtightening the knob when turning the Flowmeter off will cause damage. WARNING: The Flow Tube specifies the gas and pressure required. The accuracy will be affected if a different pressure, other than the one specified, is used. 2. Connect the Flowmeter to the appropriate gas source. The appropriate gas and pressure are specified on the Flow Tube or Flowmeter body. CAUTION: Ensure all connections are tight and leak free. CAUTION: Only use an oxygen-safe leak detector. CAUTION: Attaching accessories to the outlet (which may increase resistance to outlet flow) may change indicated flow but will not affect the accuracy of the flow. 3. Verify that the Float Ball is at the very bottom of the Flow Tube. NOTE: If the Float Ball is not at the bottom of the Flow Tube, the Flowmeter could be leaking. Please contact Amico Patient Care Corporation. 4. Adjust Flow: To increase - Turn Knob counterclockwise To decrease - Turn Knob clockwise 5. Set flow by aligning center of Float Ball with indicator lines on the Flow Tube. WARNING: ALWAYS confirm prescribed flow before administering to a patient and monitor the flow on a frequent basis. 6. Adjusting the flow beyond the last calibrated indicator line will result in an undetermined flow. 7. To obtain maximum flush flow, turn knob fully counterclockwise. NOTE: Any flow beyond the highest calibrated line on the Flow Tube with unrestricted flow is Flood/Flush flow. 3 Amico Patient Care Corporation

5 Cleaning Instructions CAUTION: DO NOT autoclave DO NOT gas sterilize with EtO (Ethylene Oxide) DO NOT immerse Flowmeter in any kind of liquid 1. Disconnect all connections before cleaning. 2. Clean exterior surfaces of the Flowmeter with a cloth dampened with a mild detergent and water. 3. Wipe dry with a clean cloth. Maintenance and Prevention Before and after each use, inspect the flowmeter for damage. WARNING: When changing connectors on the Flowmeter for service or replacement, NEVER attach connectors of a different gas. Doing so may result in patient injury or damage to the equipment. CAUTION: Disconnect Flowmeter from gas supply before servicing. 4

6 Flowmeter Assembly Drawing - 1 LPM Oxygen FMX-HOOD Hood FMX-GTB-TOP Flow Tube Top Bumper Item FMO-01-TUBE # Part # Flow Description Tube & Ball Set (1 LPM) 2 FMX-GTB-BSE FMX-GTB-TOP Flow Flow Tube Tube Bottom Top Bumper FMX-ORG-015MV Hood Bottom O Ring 3 FMO-LBL-01U FMO-01-TUBE Label Flow (1 Tube LPM Oxygen & Ball Set USA) (1 LPM) 4 FMO-LBL-01I Label (1 LPM Oxygen ISO) 5 FMO-LBL-01F FMX-GTB-BSE Label Flow (1 Tube LPM French Bottom Oxygen Bumper ISO) 6 FMX-BDY-STB FMX-ORG-015MV Flow Hood Meter Bottom Body O Ring 7 FMX-FLTR FMO-LBL-01U Hydrophobic Label (1 LPM Filter Oxygen USA) FMX-NPT-M2F2 NPT Fitting 1/8 MNPT to 1/8 FNPT FMX-ORG-011V FMO-LBL-01I Needle Label Valve (1 LPM Adapter Oxygen O Ring ISO) FMX-ORF-PED-NEO FMO-LBL-01F Orifice Label (Pediatric (1 LPM French & Neonatal) Oxygen ISO) 8 OR-006-VIT FMX-BDY-STB 006 Flowmeter Viton O Ring Body 9 FMX-NDL-PED-NEO FMX-FLTR Needle Hydrophobic Valve (Pediatric Filter & Neonatal) FMX-VLV-ADB-PED-NEO Needle Valve Adapter (Pediatric & Neonatal) 10 FMX-NPT-M2F2 NPT Fitting 1/8" MNPT to 1/8" FNPT FMO-KNB-GRN Knob (Oxygen USA/Green) 11 FMO-KNB-WHT FMX-ORG-011V Knob Needle (Oxygen Valve ISO/White) Adapter O Ring 12 FMX-ORF-RST-PED FMX-ORF-PED-NEO 1 LPM Orifice Orifice (Pediatric Restrictor & Neonatal) 13 FMO-LBL-01MF OR-006-VIT Label 006 (1 Viton LPM O Max Ring Flood) FMO-LBL-PED Label (Stork) 14 FMX-NDL-PED-NEO Needle Valve (Pediatric & Neonatal) 15 FMX-VLV-ADB-PED-NEO Needle Valve Adapter (Pediatric & Neonatal) 16 FMO-KNB-GRN Knob (Oxygen USA/Green) FMO-KNB-WHT Knob (Oxygen ISO/White) 17 FMX-ORF-RST-PED 1 LPM Orifice Restrictor 18 FMO-LBL-01MF Label (1 LPM Max Flood) 19 FMO-LBL-PED Label (Stork) Amico Patient Care Corporation

7 Flowmeter Assembly Drawing LPM Oxygen Item # Item Part # # Part # Description Description 1 1 FMX-HOOD FMX-HOOD Hood Hood 2 2 FMX-ORG-104V FMX-ORG-104V Flow Tube Flow Tube Top O Top Ring O Ring 3 FMX-03-BLS Delrin Ball (3.5 LPM) 3 FMX-03-BLS Delrin Ball (3.5 LPM) 4 FMO-03-TUBE Flow Tube Oxygen (3.5 LPM) 4 5 FMO-03-TUBE FMX-ORG-010V Flow Tube Flow Tube Oxygen Bottom (3.5 LPM) O Ring 5 6 FMX-ORG-010V FMX-ORG-015MV Flow Tube Hood Bottom O Ring 6 7 FMX-ORG-015MV FMO-LBL-03U Hood Label Bottom (3.5 O LPM RingOxygen USA) FMO-LBL-03I Label (3.5 LPM Oxygen ISO) 7 FMO-LBL-03U Label (3.5 LPM Oxygen USA) FMO-LBL-03F Label (3.5 LPM French Oxygen ISO) 8 FMO-LBL-03I FMX-BDY-STB Label Flow (3.5 LPM Meter Oxygen Body ISO) 9 FMO-LBL-03F FMX-FLTR Label Hydrophobic (3.5 LPM French Filter Oxygen ISO) 8 10 FMX-BDY-STB FMX-NPT-M2F2 Flowmeter NPT Fitting Body 1/8 MNPT to 1/8 FNPT 11 FMX-ORG-011V Needle Valve Adapter O Ring 9 12 FMX-FLTR FMX-ORF-LRG Hydrophobic Orifice (Large) Filter FMX-NPT-M2F2 OR-006-VIT NPT Fitting 006 Viton 1/8" O MNPT Ring to 1/8" FNPT FMX-ORG-011V FMX-NDL-LRG Needle Needle Valve Valve Adapter (Large) O Ring 12 FMX-ORF-LRG Orifice (Large) 16 FMO-KNB-GRN Knob (Oxygen USA/Green) 13 OR-006-VIT FMO-KNB-WHT 006 Viton Knob O (Oxygen Ring ISO/White) FMX-NDL-LRG FMO-ORF-RST-03 Needle 3.5 Valve LPM (Large) Orifice Restrictor 16 FMO-KNB-GRN Knob (Oxygen USA/Green) FMO-KNB-WHT Knob (Oxygen ISO/White) 17 FMO-ORF-RST LPM Orifice Restrictor

8 Flowmeter Assembly Drawing - 8 LPM Oxygen Item # Item Part # # Part # Description Description 2 FMX-ORG-104V Flow Tube Top O Ring 2 3 FMX-ORG-104V FM-BALL-08 Flow Silicon Tube Top Nitride O Ring Ball (8 LPM) 3 4 FM-BALL-08 FMO-08-TUBE Silicon Flow Nitride Tube Ball Oxygen (8 LPM) (8 LPM) 4 5 FMO-08-TUBE FMX-ORG-010V Flow Flow Tube Tube Oxygen Bottom (8 LPM) O Ring 6 FMX-ORG-015MV Hood Bottom Ring 5 FMX-ORG-010V Flow Tube Bottom O Ring 7 FMO-LBL-08U Label (8 LPM Medical Air USA) 6 FMX-ORG-015MV FMO-LBL-08I Hood Label Bottom (8 LPM O Ring Medical Air ISO) 7 FMO-LBL-08U FMO-LBL-08F Label Label (8 LPM (8 Medical LPM French Air USA) Medical Air ISO) 8 FMO-LBL-08I FMX-BDY-STB Label Flow (8 LPM Meter Medical Body Air ISO) 9 FMX-FLTR Hydrophobic Filter FMO-LBL-08F Label (8 LPM French Medical Air ISO) 10 FMX-NPT-M2F2 NPT Fitting 1/8 MNPT to 1/8 FNPT 8 11 FMX-BDY-STB FMX-ORG-011V Flowmeter Needle Body Valve Adapter O Ring 9 12 FMX-FLTR FMX-ORF-LRG Hydrophobic Orifice (Large) Filter FMX-NPT-M2F2 OR-006-VIT NPT Fitting 006 Viton 1/8" O MNPT Ring to 1/8" FNPT 14 FMX-NDL-LRG Needle Valve (Large) 11 FMX-ORG-011V Needle Valve Adapter O Ring FMX-ORF-LRG FMO-KNB-GRN Orifice Knob (Large) (Oxygen USA/Green) 13 OR-006-VIT FMO-KNB-WHT 006 Viton Knob O (Oxygen Ring ISO/White) 14 FMX-NDL-LRG Needle Valve (Large) 16 FMO-KNB-GRN Knob (Oxygen USA/Green) FMO-KNB-WHT Knob (Oxygen ISO/White) Amico Patient Care Corporation

9 Flowmeter Assembly Drawing - 15 LPM Oxygen Item # Item Part # # Part # Description Description 2 FMX-ORG-104V Flow Tube Top O Ring 2 3 FMX-ORG-104V FMX-15L-BLS Flow Stainless Tube Top Steel O Ring Ball (15 LPM) 3 4 FMX-15L-BLS FMO-15-TUBE Stainless Flow Steel Tube Ball Oxygen (15 LPM) (15 LPM) 4 5 FMO-15-TUBE FMX-ORG-010V Flow Flow Tube Tube Oxygen Bottom (15 LPM) O Ring 6 FMX-ORG-015MV Hood Bottom Ring 5 FMX-ORG-010V Flow Tube Bottom O Ring 7 FMO-LBL-15U Label (15 LPM Oxygen USA) 6 FMX-ORG-015MV FMO-LBL-15I Hood Label Bottom (15 O LPM Ring Oxygen ISO) 7 FMO-LBL-15U FMO-LBL-15F Label Label (15 LPM (15 Oxygen LPM French USA) Oxygen ISO) 8 FMO-LBL-15I FMX-BDY-STB Label Flow (15 LPM Meter Oxygen Body ISO) 9 FMX-FLTR Hydrophobic Filter FMO-LBL-15F Label (15 LPM French Oxygen ISO) 10 FMX-NPT-M2F2 NPT Fitting 1/8 MNPT to 1/8 FNPT 8 11 FMX-BDY-STB FMX-ORG-011V Flowmeter Needle Body Valve Adapter O Ring 9 12 FMX-FLTR FMX-ORF-LRG Hydrophobic Orifice (Large) Filter FMX-NPT-M2F2 OR-006-VIT NPT Fitting 006 Viton 1/8" O MNPT Ring to 1/8" FNPT 14 FMX-NDL-LRG Needle Valve (Large) 11 FMX-ORG-011V Needle Valve Adapter O Ring FMX-ORF-LRG FMO-KNB-GRN Orifice Knob (Large) (Oxygen USA/Green) 13 OR-006-VIT FMO-KNB-WHT 006 Viton Knob O (Oxygen Ring ISO/White) 14 FMX-NDL-LRG Needle Valve (Large) 16 FMO-KNB-GRN Knob (Oxygen USA/Green) FMO-KNB-WHT Knob (Oxygen ISO/White)

10 Flowmeter Assembly Drawing - 15 LPM Medical Air Item # Item Part # # Part # Description Description 2 FMX-ORG-104V Flow Tube Top O Ring 2 3 FMX-ORG-104V FMX-15L-BLS Flow Stainless Tube Top Steel O Ring Ball (15 LPM) 3 4 FMX-15L-BLS FMA-15-TUBE Stainless Flow Steel Tube Ball Medical (15 LPM) Air (15 LPM) 4 5 FMA-15-TUBE FMX-ORG-010V Flow Flow Tube Tube Medical Bottom Air (15 O Ring LPM) 6 FMX-ORG-015MV Hood Bottom O Ring 5 FMX-ORG-010V Flow Tube Bottom Ring 7 FMA-LBL-15U Label (15 LPM Medical Air USA) 6 FMX-ORG-015MV FMA-LBL-15I Hood Label Bottom (15 O LPM Ring Medical Air ISO) 7 FMA-LBL-15U FMA-LBL-15F Label Label (15 LPM (15 Medical LPM French Air USA) Medical Air ISO) 8 FMA-LBL-15I FMX-BDY-STB Label Flow (15 LPM Meter Medical Body Air ISO) 9 FMX-FLTR Hydrophobic Filter FMA-LBL-15F Label (15 LPM French Medical Air ISO) 10 FMX-NPT-M2F2 NPT Fitting 1/8 MNPT to 1/8 FNPT 8 11 FMX-BDY-STB FMX-ORG-011V Flowmeter Needle Body Valve Adapter O Ring 9 12 FMX-FLTR FMX-ORF-LRG Hydrophobic Orifice (Large) Filter FMX-NPT-M2F2 OR-006-VIT NPT Fitting 006 Viton 1/8" O MNPT Ring to 1/8" FNPT 14 FMX-NDL-LRG Needle Valve (Large) 11 FMX-ORG-011V Needle Valve Adapter O Ring FMX-ORF-LRG FMA-KNB-YLW Orifice Knob (Large) (Medical Air USA/Yellow) 13 OR-006-VIT FMA-KNB-BLK 006 Viton Knob O (Medical Ring Air ISO/Black) 14 FMX-NDL-LRG Needle Valve (Large) 16 FMA-KNB-YLW Knob (Medical Air USA/Yellow) FMA-KNB-BLK Knob (Medical Air ISO/Black) Amico Patient Care Corporation

11 Warranty Policy - Flowmeters This Product is sold by Amico Patient Care Corporation, a Richmond Hill Corporation (the Company ) under the express terms of the warranty set forth below. For a period of three (3) years (or for a period of five [5] years in North America only) from the date the Company ships this Product to the customer, this Product is warranted to be free from functional defects in materials and workmanship and to conform in all material respects to the description of the Product contained in the operation manual, so long as this Product is properly operated under conditions of normal use, regular periodic maintenance and service is performed and repairs are made in accordance with the operation manual. Within this period, Amico Patient Care Corporation will repair or replace any part which is proven to be defective at the Company s costs. All shipping and installation costs will be borne by the Customer after the first twenty four (24) months after receipt of the Product. This warranty shall not apply if the Product has been repaired or altered by anyone other than the Company or an authorized dealer, or if the Product has been subjected to abuse, misuse, negligence or accidental damage. Should the parts be repaired or replaced by an authorized technician in accordance to the Company s operation manual, the warranty will continue to be applied. This warranty is extended only to the initial customer with respect to the purchase of this Product directly from the Company or from an authorized dealer as new merchandise. Dealers are not authorized to alter or amend the warranty of any Product described in this agreement unless previously authorized in writing by the Company. This warranty is expressly in lieu of any other warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose. The Company shall not be liable for incidental, collateral, consequential or special damages including, but not limited to: lost profits or loss of use. The Company s liability, in the aggregate, shall not exceed the purchase price of the product. As determined at the sole discretion of the Company, Products which qualify under the warranty will be repaired or replaced, at the Company s option, and returned to the Customer via ground delivery. The Company reserves the right to stop manufacturing any product or change materials, designs or specifications without notice. All claims for warranty must first be approved by Amico Patient Care Corporation s Customer Service Department at: SOT-CSR@amico.com or Upon approval, the Customer Service Department will issue a Return Goods Authorization (RGA) number. An RGA must be obtained prior to commencement of any warranty claim. 10

12 Amico Patient Care Corporation 122 East Beaver Creek Road, Richmond Hill, ON L4B 1G6, Canada Toll Free Tel: Tel: Fax: SOT-IM-FLOWMETER