NATIONAL CERTIFICATE (VOCATIONAL) WORKSHOP PRACTICE NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010
|
|
- Jeremy Hodge
- 6 years ago
- Views:
Transcription
1 NATIONAL CERTIFICATE (VOCATIONAL) WORKSHOP PRACTICE NQF LEVEL 2 SUPPLEMENTARY EXAMINATION 2010 ( ) 17 March (X-Paper) 09:00 12:00 This question paper consists of 6 pages.
2 ( ) -2- NC2150(E)(M17)V TIME: 3 HOURS MARKS: 100 INSTRUCTIONS AND INFORMATION Answer ALL the questions. Read ALL the questions carefully. Number the answers according to the numbering system used in this question paper. Write neatly and legibly.
3 ( ) -3- NC2150(E)(M17)V QUESTION 1: SAFETY AND REGULATIONS Define housekeeping. Explain why housekeeping is so important and desirable in the workplace. 1.2 Study the sketch in FIGURE 1 and answer the questions that follow: FIGURE Does the sketch represent an unsafe act or an unsafe condition? Give the reasons for your answer. Explain how this unsafe situation can be avoided. 1.3 State any FIVE objectives of the Mine, Health and Safety Act (MHSA) 29.
4 ( ) -4- NC2150(E)(M17)V QUESTION 2: FIRST AID 2.1 As a firstaider you will always come into contact with sick people or casualties. This means running the risk of picking up infections that can be transmitted from one person to another. State THREE precautious which you would observe to minimise the risk of any infectious transmissions. (3) 2.2 A Safety, Health and Environment (SHE) consultant has to advise a client on first aid facilities in the workplace. Explain, using the number of employees as a reference, the first aid facilities which must be provided in the workplace. (3) 2.3 Choose a description/word from COLUMN B that matches a symptom in COLUMN A. Write only the letter (A F) next to the question ( ) in the ANSWER BOOK. COLUMN A SYMPTOMS COLUMN B CAUSES Pulse is weak or absent A fractures Frightened or afraid B second degree burns Blisters develop C electric shock Blood escapes from the body through a surface wound D E internal bleeding external bleeding Inability to use the injured limb or body part F shock Blood escapes from tissues inside the body (6) 2.4 Filling in an accident report form is a legal requirement. The form is divided into different sections. State FOUR details that should be included in each of the following: The casualty section The incident/accident section (4) (4)
5 ( ) -5- NC2150(E)(M17)V QUESTION 3: TOOLS AND EQUIPMENT USE 3.1 Identify the different parts of the hacksaw in FIGURE 2 below. Write only the answer next to the letter (A G) in the ANSWER BOOK. C B A G F E D FIGURE 2 (7) 3.2 While cutting a power cable to a specific length for a task, the hacksaw blade broke. Explain how this blade can be replaced. (6) 3.3 State the function(s) of the following parts of a bench grinder: Wheel safety cover Spark shield Motor Tool rest Identification plate QUESTION 4: WORKSITE PROCEDURES, LIFTING TECHNIQUES AND TRAINING REGULATIONS List the FIVE different categories of signs. Name TWO types of shackles.
6 ( ) -6- NC2150(E)(M17)V 4.3 Disregarding a company s rules and procedures can lead to disciplinary action taken against a worker. Give SIX examples of company rules and procedures that could lead to disciplinary action. (6) A fire in an electrical panel was caused by a short circuit. Name the class of fire and the type of fire extinguisher that can be used to extinguish the fire. Monthly inspections of fire extinguishers are necessary to maintain the proper operation of fire extinguishers. State FIVE checks that should be carried out on ALL types of fire extinguishers during the monthly inspection. QUESTION 5: SOLDERING AND GAS WELDING 5.1 Indicate whether the following statements are TRUE or FALSE. Choose the answer and write only 'true' or 'false' next to the question number ( ) in the ANSWER BOOK. Correct the statement if it is FALSE Solder will adhere to dirty surfaces. Temperature changes will affect the solder alloy. Cleaning solvents are highly flammable. Tinning is the process of lightly coating the materials to be soldered with solder. IC is the abbreviation for Internal Circuit. (8) 5.2 Explain what the difference is between the following: A proper soldered joint and a cold soldered joint. Soft and hard solders in terms of composition. 5.3 Explain the term flashback arrestor. 5.4 You have to braze two metal plates to form the base plate for a centrifugal pump. Describe how you would complete the task safely and effectively. (6) TOTAL: 100
WORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
More informationUGRacing Formula Student Garage Risk Assessment
UGRacing Formula Student Garage Risk Assessment University of Glasgow School of Engineering Location: Formula Student Workshop Building: Rankine Building, Oakfield Avenue Glasgow G12 8LT Summary of activities
More informationA Checklist for a Health and Safety Risk Assessment
A Checklist for a Health and Safety Risk Assessment Business Information Factsheet BIF376 July 2016 Introduction All employers, and certain self-employed workers and contractors, are required to assess
More informationSession: Possible Hazards and Accidents
Session: Learning Objective Explain what type of first aid should be provided to patients under different circumstances Evaluation Criteria Interactive Questioning Duration 20 Minutes Resources PowerPoint
More informationSafety Training Topic HOT WORK
Safety Training Topic HOT WORK Purpose of Meeting To remind workers that perming hotwork can result in a serious injury. To reince hotwork safety rules. To consider ways to protect yourself from hotwork
More informationHand Safety. 1 Copyright 2014 by PEC Safety Management, Inc. PPT-SM-HNDSFTY 2014
Hand Safety 1 Copyright by PEC Safety Management, Inc. Hand Safety One-third of all oil and gas industry accidents are hand injuries Companies should use engineering and work practice controls to protect
More informationHAZARD IDENTIFICATION AND RISK ANALYSIS RECORD
HAZARD IDENTIFICATION AND RISK ANALYSIS RECORD Location: Company Wide Date of Assessment: 04 April 2017 Revision No.: 0 Description of planned work or activity: HIRA Register Attendees: see attached tool-box
More informationBHC-P-07.2 Health Hazards in Construction
BHC-P-07.2 Health Hazards in Construction Contents 1.0 Purpose 2.0 Scope 3.0 Definitions 4.0 Main requirements 5.0 Guidance documents and references 6.0 Appendices Revision Register Date Version Description
More informationRisk assessment. Assessment details. Task. Introduction. Please complete the form as fully and accurately as you can. Assessors job title
Risk assessment Introduction Please complete the form as fully and accurately as you can. Assessment details Name of organisation Assessor's name Assessors job title Any Company John Smith Manager Date
More informationSOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS
SOLAR CONSTRUCTION SAFETY REVIEW QUESTIONS Review Quiz: General jobsite safety The following questions and true or false statements help ensure that you understand the material presented in this module.
More informationUETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE
UETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE TABLE OF CONTENTS Review Log... 4 Module Basis... 4 1.1 Introduction... 5 1.2 Identify And Control Risks And Hazards... 6 1.2.1 Risk Management...
More informationIndustry Code: Alberta Small Employer OHS Legislated Requirements
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Services in this industry can
More informationOFFICE OF STATE HUMAN RESOURCES
OFFICE OF STATE HUMAN RESOURCES NUMBER: PPE-1 TOTAL PAGES: 8 SUBJECT: Personal Protective Equipment Program Effective Date: Revision Date: Revision #: RELATED LEGISLATION: The purpose of this program is
More informationPersonal Protective Equipment. OSHA Office of Training and Education 1
Personal Protective Equipment OSHA Office of Training and Education 1 Protecting Employees from Workplace Hazards Employers must protect employees from hazards such as falling objects, harmful substances,
More informationNew Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety.
New Hire Safety Orientation Welcome to Flexicrew, our number one priority is you and your safety. 1 New Employee Responsibilities As a contract worker with Flexicrew Staffing, I understand by signing this
More informationBOILER MECHANIC//SR. BOILER MECHANIC
WORKING IN STEAM MANHOLES Activity Hazard Identification Required Precautions 1. Driving to and from work site. 1. Motor vehicle accident; striking pedestrians, bicyclists, or individuals using rollerblades.
More information2.This section will move into the Airway Management, Rescue Breaths & Cardiopulmonary Resuscitation (CPR).
Wilderness First Aid Fundamentals The period between the World Wars saw an increased awareness in personal first aid training. To cover all eventualities, from accidents at work to travel in foreign lands.
More informationPotential hazards People at risk and how? Actions already in place Further action required Action by
Risk Assessment Flat Roof Repair Prepared by Oracle Managed Services For: BAM FM On: 24/02/2017 Review date: N/A Potential hazards People at risk and how? Actions already in place Further action required
More informationHLTAID003 Provide first aid Summary question booklet
HLTAID003 Provide first aid Summary question booklet First aider responsibilities 1. Work Health and Safety legislation covers: (a) Only hazardous workplaces (b) Only workplaces that are isolated from
More informationPersonal Protective Equipment
Industrial Safety Series Personal Protective Equipment Dr. Ir. Yulianto S Nugroho, MSc. Department of Mechanical Engineering University of Indonesia Protecting Employees from Workplace Hazards Employers
More informationPersonal Protective Equipment. OSHA Office of Training and Education 1
Personal Protective Equipment OSHA Office of Training and Education 1 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances,
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More information'First Aid' Results For JOE BLOGGS. First Aid. Summary
'First Aid' Results For JOE BLOGGS First Aid Summary Name First Aid Test Language English Started - Finished 08th Apr 2016 13:52:48-08th Apr 2016 13:54:32 Time Available00:15:00 ( time taken 00:01:30 )
More informationPersonal Protective Equipment. OSHA Standard 29 CFR
Personal Protective Equipment 1 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances, and dangerous work procedures
More informationHot Work Permits. Why are we here? Every year fires occur, which could have been prevented had employees used appropriate fire prevention measures.
1 Why are we here? Every year fires occur, which could have been prevented had employees used appropriate fire prevention measures. This company requires the use of the Hot Work Permit system as a primary
More informationRIIERR205A Apply Initial Response First Aid
RIIERR205A Apply Initial Response First Aid Site: Student Name: Student Signature: In signing this document as the assessor you confirm the assessment was conducted according to criteria specified in this
More informationWARNING WARNING BATTLEFIELD CASUALTY DRILLS AIDE MEMOIRE FIFTH EDITION JANUARY Crown Copyright ALL RIGHTS RESERVED
BATTLEFIELD CASUALTY DRILLS WARNING Disposable gloves to be worn where possible to prevent cross infection of blood borne diseases WARNING AIDE MEMOIRE ARMY CODE 71638 FIFTH EDITION JANUARY 2007 Crown
More informationWORK HEALTH SAFETY MANAGEMENT SYSTEM First Aid Policy & Procedure WHS2200
Issued by: WHS Effective Date: 1 Oct 13 Rev: A Page 1 of 7 1. Purpose Hockey NSW is committed to preventing work -elated injuries and illness from occurring, however, if an accident or injury occurs, Hockey
More informationPersonal Protective Equipment. OSHA Office of Training and Education
Personal Protective Equipment OSHA Office of Training and Education 1 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances,
More informationFirst Aid Courses TELEPHONE ORDERS & ENQUIRIES ER 24 Pty Ltd Suite of Courses as a Registered Training Organisation Co-Provider
First Aid Courses TELEPHONE ORDERS & ENQUIRIES 1300 611 696 ER 24 Pty Ltd Suite of Courses as a Registered Training Organisation Co-Provider Table of Contents Provide Basic Emergency Life Support 3 Apply
More informationHealth and Safety Program Inspections
POLICY: It is CPP s policy to maintain a program of safety inspections. The objective of this program is to control and mitigate hazards in the workplace and worksite. All CPP s facilities and worksites
More informationTimber Times. Safety Flyer SPECIAL POINTS OF INTEREST. Partners for Healthy Forests
Timber Times Partners for Healthy Forests SPECIAL POINTS OF INTEREST Protecting Your Eyes at Work Potential Eye Hazards How to Protect Eyes from Injury Contact Lenses? What to do During an Eye Emergency
More informationSafety Manual: Hazardous Energy. January, 2017
Safety Manual: Hazardous Energy January, 2017 9.0 Hazardous Energy Introduction Energized equipment in the workplace pose a significant risk of injury and death. If the unexpected energization or start-up
More informationChapter 16 - Protective Equipment
Chapter 16 Protective Equipment Chapter 16 - Protective Equipment Introduction Hayward Electric will provide suitable equipment to protect employees from hazards in the workplace. The Responsible Safety
More informationHIGH-IMPACT. Leader s Guide
Videos for Safety Meetings 9401 HIGH-IMPACT EYE SAFETY Leader s Guide MCMXCIV, ERI PRODUCTIONS HIGH-IMPACT EYE SAFETY This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation.
More informationA guide to Part 10 of the
OCCUPATIONAL HEALTH AND SAFETY DIVISION Welding, Cutting, Burning and Soldering A guide to Part 10 of the Occupational Safety General Regulations October 2007 A GUIDE TO PART 10 WELDING, CUTTING, BURNING
More informationOHSISA TRAINING COURSE FOR WHO? DETAILS & INFORMATION
The OHS Institute of South Africa offers a full range of consulting services pertaining to Safety, Health, Environment, Risk, and Quality (SHERQ) for all sectors of industry. This includes a full range
More informationFIRST AID. Study Topics. At a minimum, the following topics are to be studied for the first aid exam.
FIRST AID Study Topics At a minimum, the following topics are to be studied for the first aid exam. TOPIC Avoid getting air in stomach during rescue breathing Burns Kinds of Burns & Care Calling for Help
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationHealth & Safety Plan `
Rolleston Men s Shed Charitable Trust Health & Safety Plan ` 54 Dynes Rd Rolleston Ph. (03) 347-3173 Cell: 027 430-3076 E-mail: rollyshed@xtra.co.nz Version 3 15/12/2016 Page 1 of 20 TABLE OF CONTENTS
More informationHOT WORK SAFETY 29 CFR WELDING & CUTTING SAFETY (HOT WORK)
Title: Hot Work/Welding Effective Date: 2/6/2013 Control Number: THG_0011 Revision Number: 1 Date: 10/10/2015 Annual Review Completed: 5/13/2015 CONTENTS HOT WORK SAFETY 29 CFR 1910.252 WELDING & CUTTING
More informationPERSONAL PROTECTIVE EQUIPMENT. 60 Minutes
PERSONAL PROTECTIVE EQUIPMENT 60 Minutes AGENDA Assess the workplace for hazards Use engineering and work practice controls Determine and provide PPE for employees Require employees to use necessary PPE
More informationCONSTRUCTION HEALTH AND SAFETY MANAGEMENT SYSTEM BASELINE HIRA
RECOMMENDED ADDITIONAL CONTROLS TASK / ACTIVITY/ EQUIPMENT/ FACILITY HAZARDS UNWANTED EVENT MINIMUM CONTROLS REQUIRED RISK NO. LIKELI-HOOD CONSE-QUENCE RISK VALUE Project Risk Assessment Page 1 of 16 All
More informationWelcome to good housekeeping training. This session is designed for all employees. To many people, good housekeeping in the workplace just means
Welcome to good housekeeping training. This session is designed for all employees. To many people, good housekeeping in the workplace just means sweeping up at the end of the shift. But good housekeeping
More information5.0 Store. safely IN THIS SECTION: 5.1 Decanting or transferring
5.0 Store hazardous substances safely IN THIS SECTION: 5.1 Decanting or transferring hazardous substances 5.2 Incompatibles 5.3 Store only what you need, store it safely 5.4 Gas cylinders 5.5 Oxy-acetylene
More informationPaediatric First Aid Instructor s Pack
Paediatric First Aid Instructor s Pack Unit One Paediatric emergency First Aid Unit 1.0 Unit 1.1 Unit 1.2 Unit 1.3 Unit 1.4 Unit 1.5 Unit 1.6 Unit 1.7 Introduction and welcome Role of the Paediatric First
More informationCONTENT OUTLINE FOR ADVANCED WILDERNESS AND REMOTE FIRST AID
CONTENT OUTLINE FOR ADVANCED WILDERNESS AND REMOTE FIRST AID The following tables outline the topics and sub topics that will be addressed in each of the modules. Please note that each module is outlined
More informationSoft Tissue Injuries
KNOWLEDGE OBJECTIVES Soft Tissue Injuries 1. List two signs of closed wounds. 2. List four purposes of bandaging. 3. Describe the best initial defence against infection of an open wound. 4. Describe how
More informationInstalling, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering and Thermal Cutting in the Workplace L/505/0144
Unit Title Ofqual unit reference number (code) Organisation Reference QCF 665 Unit Level Unit Sub Level Installing, Repairing or Modifying Construction Resources by Heating, Welding, Brazing, Soldering
More informationMARCH CORE REFRESHER HSE TOOL BOX
MARCH CORE REFRESHER HSE TOOL BOX PPE & HAND SAFETY SELECTION OF PERSONAL PROTECTION EQUIPMENT Once it has been determined that personal protection equipment is to be used; select the protective equipment
More informationONFORCE PRO SAFETY GUIDE. I. Introduction
ONFORCE PRO SAFETY GUIDE I. Introduction By partnering with OnForce, service buyers can connect with thousands of highly skilled service professionals to fulfill on-site work throughout the US. One of
More informationPermit-To-Work Guidance and Templates
Managing Contractors Policy - Appendix E Permit-To-Work Guidance and Templates This document has been constructed to provide guidance in how to use a permit to work correctly. The first part explains the
More informationEffective Date: 24-April-2017 Version: 6 Page: 1 of 8 TITLE: SAF-370, PERSONAL PROTECTIVE EQUIPMENT GUIDELINES. Table of Contents
24-April-2017 Version: 6 Page: 1 of 8 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 3 Environmental Health and Safety Office (EHSO),
More informationEquipment and Shop Safety. Safety Unit
Equipment and Shop Safety Safety Unit 2 General Safety Rules 1. Listen to or read instructions carefully before attempting to doanything. 2. Wear safety goggles to protect your eyes from chemicals, heated
More informationUniversal Precautions Policy
, Limited will adhere to the following policies when delivering care to all patients. By adhering to the following precautionary measures, the risk of transmission of disease is decreased when the infection
More informationOSU - COLLEGE OF FOOD, AGRICULTURAL AND ENVIRONMENTAL SCIENCES OSHA COMPLIANCE SELF-INSPECTION CHECKLIST
OSU - COLLEGE OF FOOD, AGRICULTURAL AND ENVIRONMENTAL SCIENCES OSHA COMPLIANCE SELF-INSPECTION CHECKLIST INSPECTED BY: BUILDING: ROOM: DATE: YES NA NO COMMENTS Recordkeeping / Safety Training Are all occupational
More informationPALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
1. De-energize circuit serving the outlet following LOTO procedure (see pages 3 5). PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All
More informationAppalachian National Scenic Trail
Appalachian National Scenic Trail 1. WORK PROJECT/ACTIVITY Portable Electric Tools 2. LOCATION Trail Wide Includes work performed on lands of National Park Service, and various states park and lands JOB
More informationTactical Emergency Casualty Care (TECC) First Care Provider Guidelines
Adopted from The Committee for TECC: Current as of June 2016 DIRECT THREAT CARE (DTC) / HOT ZONE GUIDELINES 1. In the presence of a direct threat to life, take definitive action towards mitigating that
More informationRockhampton Office Brisbane Office Tarong Site. Barron Gorge Hydro PS Kareeya Hydro PS Mica Creek PS
Business Procedure Hot Work Document Number OHS-PROC-128 This document applies to the following sites: All Sites Rockhampton Office Brisbane Office Tarong Site Barron Gorge Hydro PS Kareeya Hydro PS Mica
More informationUnderstanding health and safety in gas utilisation
Level: 3 Credit value: 11 URN: M/502/8461 Unit aim This unit aims to provide learners with the knowledge and understanding of the general health and safety requirements for working in the gas industry.
More informationFaculty/School: Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More information9 th Grade Physical Education Final Exam Review Packet. Ms. GUSTAFSON
9 th Grade Physical Education Final Exam Review Packet Ms. GUSTAFSON 90 questions: Multiple-choice True/False Matching Sport Units: Softball Lacrosse Volleyball Soccer Basketball Bowling Fitness Health
More informationDon t let a fall shatter your life!
Safety Training Courses 2014-2015 Don t let a fall shatter your life! Browns Ladders & Ceilings Ltd In House Safe Use & Pre-Use Inspection of Ladders & Steps What tests will I undertake? Lecture, theory
More informationPortable Electric Tools
A Health and Safety Guideline for Your Workplace Types Portable electric tools commonly used in industry are: drills, saws, sanders, buffers, grinders, impact wrenches, planers. Hazards The hazards associated
More informationTactical Emergency Casualty Care (TECC)
Tactical Emergency Casualty Care (TECC) Guidelines For First Care Providers Current as of June 2016 DIRECT THREAT CARE (DTC) / HOT ZONE GUIDELINES 1) In the presence of a direct threat to life, take definitive
More information2.25 Work Equipment Policy and Procedure Table of Contents
Table of Contents Section 1 - Policy... 3 1.1 Purpose... 3 1.2 Scope... 3 1.3 Requirements... 3 1.4 Responsibilities... 3 Section 2 - Procedure... 4 Section 3 - References... 5 3.1 Statutory Documents...
More informationArab Fertilizers Association Knowledge Sharing Template
In ammonia plant for abuqir 2 plant, during rising one of the workers to the top of absorption tower to check the trays of the absorption tower by crane suspended man basket. The crane shacked causing
More informationPersonal commitments you can live and work by:
Personal commitments you can live and work by: I anticipate possible dangers in any given operation and make every effort to analyze and avoid them before starting work, including immediately communicating
More informationSafety is a priority at Vault Pipelines.
Safety is a priority at Vault Pipelines. At Vault Pipelines we believe that every incident is preventable and that every task can be completed safely and efficiently. We will achieve this through our cultural
More informationJames J Arendas Ph.D.
James J Arendas Ph.D. Safety Program Elements Management Commitment Hazard Identification Hazard Correction Training Hazard Identification Qualified and Competent Persons Identify Hazards in the Workplace
More informationHazard Recognition and Identification
Hazard Recognition and Identification Safety Meeting Hazard A hazard is any source of potential damage, harm or adverse effects on something or someone under certain conditions. Hazard Examples of hazards
More informationWritten Programs Listing
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
More informationSAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number K-3.0 Welding Safety Procedures
Number K-3.0 Issued: 1/2009 Revised: 3/2016 Page 1 of 3 1.0 PURPOSE: To standardize procedures associated with production and maintenance welding and to minimize the potential risk of accident or injury
More informationGUIDELINES FOR HEALTH AND SAFETY
GUIDELINES FOR HEALTH AND SAFETY 1. Summary 2. Introduction 3. Health & safety guidelines a. Masts erecting and dismantling b. Avoiding danger from overhead power lines c. Generators d. Installing radio
More informationPERFORMANCE CRITERIA
FPICOR2006A Unit Descriptor Pre-requisite Unit(s) Application of the Unit Competency Field Sector Apply basic first aid This unit specifies the outcomes required to deal with the provision of essential
More informationPALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT
PALM BEACH STATE COLLEGE PERSONAL PROTECTIVE EQUIPMENT (PPE) JOB HAZARD ASSESSMENT Department: Facilities Campus: All Task: Replace a Light Ballast Job Title(s) Performing Task: Electrician, Maintenance
More informationExposure to noise in our work environment causes a number of physiological and psychological responses. Noise can have the following effects:
Noise Excessive noise is unwanted sound which may damage a person's hearing. Noise at the workplace is a major cause of hearing loss in Queensland. It contributes to social isolation and reduced quality
More informationHazard Identification and Risk Assessment Form. Risk Assessment
Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed
More informationFirst aid training course information guide
Save a life...learn first aid First aid training course information guide National RTO #88041 St John Ambulance (Qld) total first aid solutions 2 Provide Cardiopulmonary Resuscitation This course provides
More informationLevel 3 Award in First Aid
Level 3 Award in First Aid Level 3 Award in First Aid The CIEH Level 3 Award in First Aid at Work is a twounit, three-day course that will enable successful candidates to act as a first aider in their
More informationFIRST-AID LEAFLET SITUATIONS PROCEDURES
Page 1 FIRST-AID LEAFLET SITUATIONS PROCEDURES CONTENTS: FIRST AID ARTIFICIAL RESPIRATION CONTROL OF BLEEDING FRACTURES BURNS SHOCK WOUNDS EYE INJURIES ABDOMINAL WOUNDS BACKBONE FRACTURE HEAT STROKE BLEEDING
More informationPaediatric HANDBOOK ADDENDUM. Paediatric First Aid - ADDENDUM (reflecting the new Level 3, 2 Unit Qualification)
Paediatric first aid HANDBOOK A reference for Level 3 Paediatric First-Aid Qualifications ADDENDUM Paediatric First Aid - ADDENDUM (reflecting the new Level 3, 2 Unit Qualification) This addendum reflects
More informationSafety data sheet pursuant to ordinance (EC) No. 453/2010 (EC) No. 1907/2006 (REACH)
Print date: 02/03/2016 Page 1 1. DESIGNATION OF THE MATERIAL OR MIXTURE AND COMPANY NAME 1.1 Product identifier Product name Trade name CAS No. EC No. Lead-free electronic solder Art. No. 150152/150154/150156/150158/150162/150164
More informationPRESCOTT SCHOOL DISTRICT NO South A Street Prescott, WA The Control of Hazardous Energy (Lockout/Tagout)
PRESCOTT SCHOOL DISTRICT NO. 402-37 207 South A Street Prescott, WA 99348 509-849-2217 The Control of Hazardous Energy (Lockout/Tagout) I. Purpose The Control of Hazardous Energy (Lockout/Tagout) This
More informationOverview IMIARBBP21. Carry Out Motor Vehicle Body Metal Inert Gas (MIG) Brazing Operations
Overview This standard is about joining materials correctly and effectively using Metal Inert Gas (MIG) Brazing techniques and procedures. 1 Performance criteria You must be able to: 1. use the appropriate
More informationCHAPTER 13: FIRST AID MEDICAL PROCEDURES
CHAPTER 13: FIRST AID MEDICAL PROCEDURES General Overview First aid cases include one-time treatment and subsequent observation of minor scratches, cuts, burns, splinters, and so forth, which do not ordinarily
More informationAssessment Requirements for HLTAID003 Provide first aid
Assessment Requirements for HLTAID003 Provide first aid Release: 4 Assessment Requirements for HLTAID003 Provide first aid Modification History Release Release 1.1 Comments Minor corrections to formatting
More informationSafety Rules for the Science Lab
Science 10 Safety in the Science Lab Name: Date: Block: Safety Rules for the Science Lab DRESS CODE 1. To protect your eyes from possible injury, wear safety goggles whenever you are working with chemicals,
More informationModule: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
More informationCOMMUNITY RESPONSE TO MEDICAL EMERGENCIES:
COMMUNITY RESPONSE TO MEDICAL EMERGENCIES: For any on-campus emergency, dial x456 from an on campus phone or From a cell phone dial 508-494-9010. A medical emergency can occur anywhere on campus. The reaction
More informationExercise 7-2: Perform the Control Bleeding, Prevent or Control Shock, and Treat Burns Task
Exercise 7-2: Perform the Control Bleeding, Prevent or Control Shock, and Treat Burns Task Directions: 1. Print out this exercise. 2. Find two fellow recruits, either through the buddies available online
More informationDoc #: 1000-AD Revision: - PERSONAL PROTECTIVE EQUIPMENT (PPE) SOP. Author(s): T. Lavoie/ M. Saucedo/ J. Dunlop/ Mtn.
Doc #: 1000-AD-015-0008 Revision: - PERSONAL PROTECTIVE EQUIPMENT (PPE) SOP Author(s): T. Lavoie/ M. Saucedo/ J. Dunlop/ Mtn. Supervisor TABLE OF CONTENTS REVISION HISTORY... 3 1.0 INTRODUCTION... 4 2.0
More informationSAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
More informationRisk Management Resources
Risk Management Resources Machine Guarding Name: Notes: Electrical Systems: Fire Prevention Are circuit breakers accessible to personnel, protected from physical damage, and located away from ignitable
More informationQUALIFICATION SPECIFICATION
QUALIFICATION SPECIFICATION FAA LEVEL 3 AWARD IN ACTIVITY FIRST AID (RQF) AWARD IN ACTIVITY FIRST AID AT SCQF LEVEL 6 The qualification is designed to provide the knowledge and competence required for
More informationWEBELOS READYMAN. PLACES TO GO fire station Red Cross center trauma center
SUGGESTED DEN MEETING ACTIVITIES Discuss first aid. Practice the treatment for hurry cases. Put together a first aid kit for your den. Practice mouth to mouth resuscitation on a mannequin. Talk about where
More informationChapter 2. Welding Safety Delmar, Cengage Learning
Chapter 2 Welding Safety Objectives After completing this chapter, you will be able to: Explain how to work safely Identify each degree of burn and describe how to provide first aid List the types of protective
More informationBasic First Aid for Medical Emergencies. Session Objectives. Prequiz: True or False? 10/18/2013
Basic First Aid for Medical Emergencies Session Objectives Recognize the benefits of obtaining first-aid and CPR certification Identify proper procedures for a variety of medical emergencies Assist in
More informationHazard Identification and Risk Assessment Form. Risk Assessment
Identification and Assessment Form Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. instructed
More information