Tefzel ETFE Conductive Fluoropolymer
|
|
|
- Ariel Gaines
- 6 years ago
- Views:
Transcription
1 This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product Grade/Type : HT 2160, HT 2170 MSDS Number : Product Use : Plastic material for further processing Manufacturer : DuPont 1007 Market Street Wilmington, DE Product Information : (outside the U.S ) Medical Emergency : (outside the U.S ) Transport Emergency : CHEMTREC: (outside the U.S ) SECTION 2. HAZARDS IDENTIFICATION Potential Health Effects Skin Tetrafluoroethyle ne/ethylene copolymer : Dust may cause: Discomfort, itching, redness, or swelling. Eyes Tetrafluoroethyle ne/ethylene copolymer : Dust may cause: tearing, Redness, Discomfort. Carbon black : Particulate matter may cause: mechanical irritation with tearing, pain or visual impairment Inhalation 1 / 9
2 Tetrafluoroethyle ne/ethylene copolymer : Dust may cause: Respiratory tract irritation The thermal decomposition vapours of fluorinated polymers may cause polymer fume fever with flu-like symptoms in humans, especially when smoking contaminated tobacco. Symptoms usually appear after several hours and resolve within 1 to 2 days. Repeated episodes of polymer fume fever may result in persistent lung effects. Polymer may extensively decompose if severely overheated or burned. Inhalation of fluorinated decomposition products may cause lung irritation and pulmonary oedema. Symptoms may be delayed for several hours. Symptoms may be severe or life-threatening. Carbon black : May cause respiratory impairment and lung damage. Target Organs Carbon black : Lungs Carcinogenicity Material IARC NTP OSHA Carbon black 2B SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Component CAS-No. Concentration Tetrafluoroethylene/ethylene copolymer >85% Carbon black <15 % SECTION 4. FIRST AID MEASURES 2 / 9
3 Skin contact Eye contact Inhalation Ingestion General advice : No hazards which require special first aid measures. Wash off with soap and water. Cool skin rapidly with cold water after contact with molten material. Do not peel polymer from the skin. Consult a physician. : Hold eye open and rinse slowly and gently with water for minutes. Get medical attention immediately. : Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. Consult a physician. : Not a probable route of exposure. However, in case of accidental ingestion, call a physician. : Never give anything by mouth to an unconscious person. No hazards which require special first aid measures. SECTION 5. FIRE-FIGHTING MEASURES Flammable Properties Flash point : not applicable Autoignition temperature Ignition temperature : 470 C (878 F) : C ( F) Fire and Explosion Hazard Suitable extinguishing media Firefighting Instructions : Hazardous decomposition products formed under fire conditions. acid fluorides Fluorinated compounds Hydrogen fluoride Carbon monoxide : Carbon dioxide (CO2), Dry powder, Foam, Water : In the event of fire, wear self-contained breathing apparatus. Wear suitable protective equipment. Wear neoprene gloves during cleaning up work after a fire. 3 / 9
4 SECTION 6. ACCIDENTAL RELEASE MEASURES NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with cleanup. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up. Safeguards (Personnel) : Ventilate the area. Refer to protective measures listed in sections 7 and 8. Material can create slippery conditions. Spill Cleanup Accidental Release Measures : Sweep up and shovel into suitable containers for disposal. Clean contaminated floors and objects thoroughly while observing environmental regulations. : No special environmental precautions required. SECTION 7. HANDLING AND STORAGE Handling (Personnel) : For personal protection see section 8. Protect from contamination. When opening containers, avoid breathing vapours that may be emanating. Avoid breathing dust. Avoid contamination of cigarettes or tobacco with dust from this material. Provide appropriate exhaust ventilation at dryers, machinery and at places where dust or volatiles can be generated. In case of insufficient ventilation, wear suitable respiratory equipment. Do not use a torch to clean this material from equipment without local exhaust ventilation and respirator. Wash hands and face before breaks and immediately after handling the product. Do not contaminate tobacco products. Handling (Physical Aspects) Storage : Take necessary action to avoid static electricity discharge (which might cause ignition of organic vapours). : Keep container tightly closed in a dry and well-ventilated place. Protect from contamination. Stable under recommended storage conditions. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering controls : Ensure adequate ventilation, especially in confined areas. Good general 4 / 9
5 ventilation should be provided to keep dust concentrations below the exposure limits. Local exhaust ventilation should be employed to minimize airborne contamination. Personal protective equipment Respiratory protection Eye protection Skin and body protection : When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. : Safety glasses with side-shields : If there is a potential for contact with hot/molten material wear heat resistant clothing and footwear. Regular cleaning of equipment, work area and clothing. Exposure Guidelines Exposure Limit Values Dust (inhalable and respirable fraction) TLV (ACGIH) 10 mg/m3 TWA Inhalable particles. 3 mg/m3 TWA Respirable particles. PEL: (OSHA) 5 mg/m3 TWA Respirable fraction. Remarks All inert or nuisance dusts, whether mineral, inorganic, or organic, not listed specifically by substance name are covered by the Particulates Not Otherwise Regulated (PNOR) limit which is the same as the inert or nuisance dust limit of Table Z mg/m3 TWA Total dust. Carbon black PEL: (OSHA) 3.5 mg/m3 8 hr. TWA TLV (ACGIH) 3.5 mg/m3 TWA AEL * (DUPONT) 0.5 mg/m3 8 & 12 hr. TWA (Polynuclear Hydrocarbon content <0.1%) Includes Channel, Lamp, and Thermal Black. * AEL is DuPont's Acceptable Exposure Limit. Where governmentally imposed occupational exposure limits which are lower than the AEL are in effect, such limits shall take precedence. 5 / 9
6 SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Form : pellets Color : black Odor : none Melting point/range : C ( F) Density : 1.7 g/cm3 Water solubility : insoluble Limiting oxygen index : 30 % ASTM D 2863 SECTION 10. STABILITY AND REACTIVITY Stability : Stable under recommended storage conditions. Conditions to avoid Hazardous decomposition products Hazardous reactions : To avoid thermal decomposition, do not overheat. Abnormally long processing time or high temperatures can produce irritating and toxic fumes. Stable under normal conditions. : Hazardous thermal decomposition products: Hydrogen fluoride, Carbonyl fluoride, acid fluorides : During drying, cleaning and moulding, small amounts of hazardous gases and/or particulate matter may be released. These may irritate eyes, nose and throat. Large molten masses may give off hazardous gases. SECTION 11. TOXICOLOGICAL INFORMATION Tetrafluoroethylene/ethylene copolymer Oral ALD : > 5,000 mg/kg, rat Inhalation 4 h LC50 : 7.3 mg/l, rat Skin irritation : slight irritation, human Skin sensitization : Patch test on human volunteers did not demonstrate sensitization properties., human 6 / 9
7 Further information : The substance is a polymer and is not expected to produce toxic effects. Carbon black Oral ALD : > 25,100 mg/kg, rat Skin irritation : animals (unspecified species) non-irritant Eye irritation : animals (unspecified species) non-irritant Skin sensitization : human There are no reports of human skin sensitization. Repeated dose toxicity : Inhalation Lungs, Inflammation, Fibrosis Carcinogenicity : An increased incidence of tumours was observed in some laboratory animals but not in others. Overall weight of evidence indicates that the substance is not carcinogenic. Mutagenicity : Tests on bacterial or mammalian cell cultures did not show mutagenic effects. Evidence suggests this substance does not cause genetic damage in animals. SECTION 12. ECOLOGICAL INFORMATION Aquatic Toxicity Tetrafluoroethylene/ethylene copolymer : The substance is a polymer and is not expected to produce toxic effects. Carbon black : Aquatic toxicity is unlikely due to low solubility. Additional ecological information : This product has no known eco-toxicological effects. 7 / 9
8 SECTION 13. DISPOSAL CONSIDERATIONS Waste Disposal : Like most thermoplastic plastics the product can be recycled. If recycling is not practicable, dispose of in compliance with local regulations. Incinerate only in incinerators capable of scrubbing out acidic combustion products. Environmental Hazards : Empty containers should be taken to an approved waste handling site for recycling or disposal. SECTION 14. TRANSPORT INFORMATION Not classified as dangerous in the meaning of transport regulations. SECTION 15. REGULATORY INFORMATION TSCA Status : On the inventory, or in compliance with the inventory SARA 313 Regulated Chemical(s) California Prop. 65 PA Right to Know Regulated Chemical(s) NJ Right to Know Regulated Chemical(s) : SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. : WARNING! This product contains a chemical known to the State of California to cause cancer.tetrafluoroethylene, Carbon black : Substances on the Pennsylvania Hazardous Substances List present at a concentration of 1% or more (0.01% for Special Hazardous Substances): Carbon black : Substances on the New Jersey Workplace Hazardous Substance List present at a concentration of 1% or more (0.1% for substances identified as carcinogens, mutagens or teratogens): Carbon black 8 / 9
9 SECTION 16. OTHER INFORMATION NFPA Health : 2 Flammability : 1 Reactivity/Physical hazard : 0 Restrictions for use : Do not use DuPont materials in medical applications involving implantation in the human body or contact with internal body fluids or tissues unless the material has been provided from DuPont under a written contract that is consistent with DuPont policy regarding medical applications and expressly acknowledges the contemplated use. For further information, please contact your DuPont representative. You may also request a copy of the DuPont POLICY Regarding Medical Applications H and DuPont CAUTION Regarding Medical Applications H DuPont Tefzel is a Registered Trademark of E. I. dupont de Nemours and Company. The DuPont Oval Logo is a registered trademark of E.I. du Pont de Nemours and Company. Before use also read the following bulletin(s): Fluoropolymer Safe Handling Guide published by the Society of the Plastics Industry. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Significant change from previous version is denoted with a double bar. 9 / 9
Tefzel ETFE FLUOROPOLYMERS
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE fluoroplastics
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PFA Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PTFE Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Conductive Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
AF Amorphous Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ZODIAQ Quartz Surfaces
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
: Tefzel ETFE fluoropolymers
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
KEVLAR brand engineered elastomer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Tyvek ThermaWrap R5.0
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox GPL 21(X) Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Manufacturer : DuPont Performance Elastomers L.L.C Bellevue Park Corporate Center, 300 Bellevue Parkway Wilmington, Delaware 19809
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of Japan and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of Japan and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
DuPont Sealant for Tyvek Fluid Applied System
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox PFPE Oils
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox PFPE/PTFE Greases (GPL 20(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Neoprene polychloroprene
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox 143 Series Oils
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox 240 Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ZODIAQ Quartz Surfaces
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Ti-Pure Titanium Dioxide Pigment - Paint Coatings - Dry Grades
This SDS adheres to the standards and regulatory requirements of Canada and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product
Krytox RFE PFPE High Performance Lubricant
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont StoneTech Professional Semi Gloss Finishing Sealer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont RelyOn Antiseptic Hand Gel
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Tyvek Fluid Applied WB
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox NRT 8908 Paste
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ELVAMIDE 8061 nylon multipolymer resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
: : Sontara Old Hickory, Inc. 326 Swinging Bridge Rd. Old Hickory, TN 37138
Safety Data Sheet This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory Requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
DuPont StoneTech Professional Enhancer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont StoneTech Professional Enhancer product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "HYTREL" POLYESTER ELASTOMERS ALL IN
Material Safety Data Sheet Nomex
Material Safety Data Sheet Nomex SECTION 1: Identification of the Substance/mixture and of the Company/Undertaking Product Grade/Type: Yarn, Staple, Fabric, Floc, Tow Tradename/Synonym: formerly MSDS#
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Corian Solid Surface Material
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZODIAQ" QUARTZ SURFACES COR009 Revised
DuPont Penetrating Sealers
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tynex A abrasive filaments
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Manufacturer Name: Federal-Mogul Corporation 26555 Northwestern Highway Southfield, Michigan 48034 U.S.A. Intended Use: Industrial
DuPont(TM) Tedlar(R) Oriented PVF Film
This document is for information only, provided voluntarily and not subsequent to regulatory requirement. PRODUCT AND CONTACT INFORMATION Product identifier Product name : Synonyms : TBB15BL3; TCD15BL3;
DuPont Page 1 Material Safety Data Sheet
DuPont Page 1 "CORIAN" PRODUCTS, SILICONE SEALANT ALL COLORS COR005 Revised April 7, 2011 Printed 7-APR-2011 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification Corian is a registered trademark
ELVANOL polyvinyl alcohol
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
: May cause mechanical irritation. The molten product can cause serious burns.
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Nylon 6 General Purpose Homopolymer Resin MSDS Number : 000000011561 Product Use Description : Fibers: Carpet fiber & Mono/Multi Filament Applications;
Ref Product name : Corian Solid Surface Product Use : sheets and shaped articles, For professional users only.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION PARALOID# K-120N Processing Aid Supplier Rohm and Haas Company 100 Independence Mall West Philadelphia, PA 19106-2399 USA Revision date:
Material: Mosites #2902 Version 1.0 Revision Date:
Version 1.0 Revision Date: 1-22-15 Section 1 Product and Company Identification Trade Name Mosites #2902 Product Group Aflas Fluoroelastomer Manufacturer Mosites Rubber Company 2720 Tillar Street Fort
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
Revision date: 01/11/2015 SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance Formula : CaCO 3 Molecular weight : : 100.09 g/mol CAS No. :
Material: Mosites #60412 Version 1.0 Revision Date:
Section 1 Product and Company Identification Trade Name Mosites #60412 Product Group Neoprene polychloroprene Manufacturer Mosites Rubber Company 2720 Tillar Street Fort Worth, Texas 76107 USA Customer
1-Octene, polymer with ethene (cas ) MSDS
Click http://www.guidechem.com/cas-262/26221-73-8.html for suppliers of this product 1-Octene, polymer with ethene (cas 26221-73-8) MSDS The MSDS format adheres to the standards and regulatory requirements
Ref IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
DuPont StoneTech Professional Impregnator Pro Sealer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Safety Data Sheet. Section 2. Hazards Identification
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Fumagillin Product ID F8048 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 Amebacilin;
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).
1. PRODUCT AND COMPANY IDENTIFICATION Product name : IRDye 700 Phosphoramidite Part Number(s) : 830-05368, 4200-33, 4200-34 Brand : LI-COR Identified uses : Laboratory chemicals, Manufacture of substances
: DuPont Tyvek Spunbond Polyethylene
This SDS adheres to the standards and regulatory requirements of India and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
SAFETY DATA SHEET. Trade name: Master Fiber Seal Revised: 5/29/2015. SECTION 1: Identification of the substance/mixture and of the company/undertaking
MMG Mud Masters Group a division of Horizon Mud Company SAFETY DATA SHEET SECTION 1: Identification of the substance/mixture and of the company/undertaking Trade name: Master Fiber Seal Supplied by: Mud
Safety Data Sheet. LKT Laboratories, Inc.
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Melatonin Product ID M1745 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 Regulin;
"KRYTOX" LVP Fluorinated Grease 5806PP Revised 5-NOV-1993 Printed 19-NOV-2002
"KRYTOX" LVP Fluorinated Grease 5806PP Revised 5-NOV-1993 Printed 19-NOV-2002 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification "KRYTOX" is a registered trademark of DuPont. Corporate MSDS
Material Safety Data Sheet Product Name: Product Code:
Version Date: /0/999 Section. Chemical, Product and Company Identification Page of 5 Print Date 6/2/00 4:48:42 PM Synonyms: Responsible Party: Product Use: POLYETHYLENE ETHENE HOMOPOLYMER (formerly Hoechst
Material Safety Data Sheet WURTH THERMOMELT 100 ADHESIVE (BLACK)
Health Reactivity NFPA: Flammability HMIS III: 0 1 0 HEALTH FLAMMABILITY 0 1 Specific Hazard PHYSICAL 0 0 = Insignificant, 1 =Slight, 2 =Moderate, 3 =High, 4 = Extreme SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: 2017 Product Name: Slip Stop Other Means of Identification SDS #: F6523 1. PRODUCT AND COMPANY IDENTIFICATION Recommended
DuPont Express SG EUP
This SDS adheres to the standards and regulatory requirements of Canada and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Tradename/Synonym
SIGMA-ALDRICH. Material Safety Data Sheet Version 4.1 Revision Date 04/05/2011 Print Date 08/31/2011
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 4.1 Revision Date 04/05/2011 Print Date 08/31/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : β-carotene Product Number : C9750
Safety Data Sheet. Section 1. Product and Company Identification. Section 2. Hazards Identification
LKT Laboratories, Inc. Safety Data Sheet Product Name Product ID Chemical Name (Synonyms) Supplier R-(+)-Ofloxacin O2146 Section 1. Product and Company Identification S-(-)-Ofloxacin; Levofloxacin; Tavanic;
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZYTEL" POLYAMIDE RESINS ON SYNONYM
Safety Data Sheet. Section 1. Product and Company Identification. Section 2. Hazards Identification
LKT Laboratories, Inc. Safety Data Sheet Product Name Triclosan Product ID T6931 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 LKT Laboratories, Inc 545 Phalen Blvd. St. Paul, MN 55130
NOMEX Aramid Paper & Pressboard
This SDS adheres to the standards and regulatory requirements of China and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "KRYTOX" GPL-21X Series Fluorinated
ASENSA CL 300, 25 KG, D
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Asensa Ethylene-Vinyl Acetate Copolymers MSDS Number : 000000011596 Product Use Description : Personal care Company : Honeywell International,
Safety Data Sheet. Section 2. Hazards Identification. Not classified. Caution - substance not yet fully tested.
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Baccatin VI Product ID T1024 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 LKT Laboratories,
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Roundit 2000 FR Manufacturer Name: Federal Mogul World Headquarters 26555 Northwestern Highway Southfield, Michigan 48033 Emergency
Material Safety Data Sheet
HD-3007 HD3007 Revised 27-MAY-2008 Printed 27-MAY-2008 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Company Identification MANUFACTURER/DISTRIBUTOR HD MicroSystems(TM) Cheesequake Road Parlin New Jersey USA
Safety Data Sheet. Section 1. Product and Company Identification
LKT Laboratories, Inc. Safety Data Sheet Product Name Product ID Chemical Name (Synonyms) Supplier Palmitoyl-D,L-carnitine P0145 Section 1. Product and Company Identification Palmitoyl-DL-carnitine chloride
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 10/27/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Polypropylene, isotactic, chlorinated
Safety Data Sheet. Section 1. Product and Company Identification. SIRT 1/2 inhibitor IV, SIRT1 Inhibitor II, NSC112546, SIRT2 Inhibitor VI.
LKT Laboratories, Inc. Safety Data Sheet Product Name Cambinol Product ID C0048 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 Section 1. Product and Company Identification SIRT 1/2
Safety Data Sheet. 3-[4-(1H-imidazol-1-ylmethyl)phenyl]-2E-propenoic acid, OKY-046
![Safety Data Sheet. 3-[4-(1H-imidazol-1-ylmethyl)phenyl]-2E-propenoic acid, OKY-046](/thumbs/87/95048307.jpg "Safety Data Sheet. 3-[4-(1H-imidazol-1-ylmethyl)phenyl]-2E-propenoic acid, OKY-046")
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Ozagrel Hydrochloride Product ID O9702 Chemical Name (Synonyms) 3-[4-(1H-imidazol-1-ylmethyl)phenyl]-2E-propenoic
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 05/10/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Poly(vinyl buytral) Molecular Formula:
Healthbond 2300 Ultra Green Plus Carpet Tile Adhesive
SECTION 1. IDENTIFICATION Product name : Product code : Manufacturer or supplier's details Company name of supplier : Bentley Mills Address : 14641 East Don Julian Road City of Industry CA 91746 Telephone
SIGMA-ALDRICH. Material Safety Data Sheet Version 3.3 Revision Date 05/09/2012 Print Date 12/24/2013
SIGMA-ALDRICH sigma-aldrich.com Material Safety Data Sheet Version 3.3 Revision Date 05/09/2012 Print Date 12/24/2013 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Activated charcoal Product Number
CAS-No. EC-No. Index-No. Concentration Cellulose May be harmful if inhaled. May cause respiratory tract irritation.
SIGMA-ALDRICH Material Safety Data Sheet Version 3.0 Revision Date 01/03/2009 Print Date 03/23/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : -Cellulose Product Number : C8002 Brand : Sigma
Safety Data Sheet HIGH TEMP GLUE STICKS (10 PIECES)
SECTION 1. IDENTIFICATION Commercial Product : Name Product number : 0890100050 SDS-Identcode : 10033067 Product Use Description : Hot-melt adhesives Company : Wurth USA Inc. 93 Grant St. 07446 Ramsey,
Engarde 25 SG Herbicide
This SDS adheres to the standards and regulatory requirements of Canada and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : MSDS
Safety Data Sheet. (L-Aspartic Acid) L-Aspartic Acid DATE PREPARED: 3/6/2017. Section 1. Product and Company Identification
Section 1. Product and Company Identification L-Aspartic Acid Product Name CAS Number 56-84-8 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899
Material Safety Data Sheet
Material Safety Data Sheet Version 5.0 Revision Date 6/12/2014 Print Date 6/12/2014 1. PRODUCT AND COMPANY IDENTIFICATION Product Name : Sodium Hyaluronate Brand : SCC Company : Stanford Chemicals Company
SAFETY DATA SHEET PRODUCT IDENTIFICATION. 5.0 oz/yd² g/m². 445 St-Jacques Québec, Canada J3B 2M1 Tel.: (450)
SAFETY DATA SHEET PRODUCT IDENTIFICATION Product Name: Product composition: Weaver: Raw material: TA-05-P 5.0 oz/yd² - 168 g/m² 100% Kevlar Aramid fabric Texonic inc 445 St-Jacques Québec, Canada J3B 2M1
MATERIAL SAFETY DATA SHEET
Page 1 Section 01 - Product and company identification Distributor: Telephone No.: 1 - - 0 Emergency tel. number: +1 800-424-9300(CHEMTREC) Trade name: Oxygen Absorber 504AZ30 6K/CTN Material number: 267849
Safety Data Sheet. Trade Name: RNase A. Revision Date: 12/30/2016 SECTION 1. IDENTIFICATION OF PRODUCT AND COMPANY: RNase A
SECTION 1. IDENTIFICATION OF PRODUCT AND COMPANY: Product Name: RNase A Manufacturer or Supplier Details: Company Name: Address: Norcross, GA 30071 USA Telephone: 1-800-832-8896 Email: Emergency Telephone: