TANKS 4.0.9d Emissions Report - Detail Format Tank Indentification and Physical Characteristics
|
|
|
- Magnus Daniel
- 6 years ago
- Views:
Transcription
1 Page 1 of 5 Tank Indentification and Physical Characteristics Identification User Identification: City: State: Company: Type of Tank: Description: SRX-T-101 San Francisco AP California Mobius Vertical Fixed Roof Tank NMP Tank Tank Dimensions Shell Height (ft): 5.00 Diameter (ft): 3.17 Liquid Height (ft) : 4.00 Avg. Liquid Height (ft): 3.50 Volume (gallons): Turnovers: Net Throughput(gal/yr): 11, Is Tank Heated (y/n): N Paint Characteristics Shell Color/Shade: Shell Condition Roof Color/Shade: Roof Condition: White/White Good White/White Good Roof Characteristics Type: Dome Height (ft) 0.00 Radius (ft) (Dome Roof) 3.17 Breather Vent Settings Vacuum Settings (psig): Pressure Settings (psig) 0.03 Meterological Data used in Emissions Calculations: (Avg Atmospheric Pressure = psia)
2 Page 2 of 5 Liquid Contents of Storage Tank Daily Liquid Surf. Temperature (deg F) Liquid Bulk Temp Vapor Pressure (psia) Vapor Mol. Liquid Mass Vapor Mass Mixture/Component Month Avg. Min. Max. (deg F) Avg. Min. Max. Weight. Fract. Fract. W N-methyl-2-pyrro All
3 Page 3 of 5 Detail Calculations (AP-42) Annual Emission Calcaulations Standing Losses (lb): Vapor Space Volume (cu ft): Vapor Density (lb/cu ft): Vapor Space Expansion Factor: Vented Vapor Saturation Factor: Tank Vapor Space Volume: Vapor Space Volume (cu ft): Tank Diameter (ft): Vapor Space Outage (ft): Tank Shell Height (ft): Average Liquid Height (ft): Roof Outage (ft): Roof Outage (Dome Roof) Roof Outage (ft): Dome Radius (ft): Shell Radius (ft): Vapor Density Vapor Density (lb/cu ft): Vapor Molecular Weight (lb/lb-mole): Daily Avg. Liquid Surface Temp. (deg. R): Daily Average Ambient Temp. (deg. F): Ideal Gas Constant R (psia cuft / (lb-mol-deg R)): Liquid Bulk Temperature (deg. R): Tank Paint Solar Absorptance (Shell): Tank Paint Solar Absorptance (Roof): Daily Total Solar Insulation Factor (Btu/sqft day): 1, Vapor Space Expansion Factor Vapor Space Expansion Factor: Daily Vapor Temperature Range (deg. R): Daily Vapor Pressure Range (psia): Breather Vent Press. Setting Range(psia): Vapor Pressure at Daily Minimum Liquid Vapor Pressure at Daily Maximum Liquid Daily Avg. Liquid Surface Temp. (deg R): Daily Min. Liquid Surface Temp. (deg R): Daily Max. Liquid Surface Temp. (deg R): Daily Ambient Temp. Range (deg. R): Vented Vapor Saturation Factor Vented Vapor Saturation Factor: : Vapor Space Outage (ft): Working Losses (lb): Vapor Molecular Weight (lb/lb-mole): Annual Net Throughput (gal/yr.): 11, Annual Turnovers: Turnover Factor: Maximum Liquid Volume (gal): Maximum Liquid Height (ft): Tank Diameter (ft): Working Loss Product Factor: Total Losses (lb):
4 Page 4 of 5 Individual Tank Emission Totals Emissions Report for: Annual Losses(lbs) Components Working Loss Breathing Loss Total Emissions N-methyl-2-pyrro
5 Page 5 of 5
KNOWN: Mass, pressure, temperature, and specific volume of water vapor.
.0 The specific volume of 5 kg of water vapor at.5 MPa, 440 o C is 0.60 m /kg. Determine (a) the volume, in m, occupied by the water vapor, (b) the amount of water vapor present, in gram moles, and (c)
Questions/Reminders HW2 Question #3
3. You determined that your workplace has fugitive o-cresol emissions with maximum annual o-cresol concentrations of 75 μg/m 3 (in air), and you would like to assess worker exposure to o-cresol. a) Calculate
PETROLEUM ENGINEERING 310 FIRST EXAM. September 22, 2000
Session: Name: PETROLEUM ENGINEERING 310 FIRST EXAM September 22, 2000 Do all your work on the test paper and the space provided for the answer, do no write on the back. Grading will be based on approach
Combined Pressure / Vacuum Relief Valve KITO VD/o
KITO VD/o DN D H kg* vacuum setting (mbar) pressure DIN ANSI DIN ANSI min max min max** 50 PN 16 2 220 332 351 11 3 50 10 75 80 PN 16 3 260 367 387 145 3 50 10 70 100 PN 16 4 260 368 393 178 3 50 10 80
Reservoir Fluid Fundamentals COPYRIGHT. Dry Gas Fluid Basic Workflow Exercise Review
Pseudo-Critical Properties Reservoir Fluid Fundamentals Dry Gas Fluid Basic Workflow Exercise Review B C D E F 3 Separator Gas Specific Gravity 0.6300 [1/air] 0.6300 [1/air] 4 Separator Pressure 100.0
94270 Vapor Guard Tank Blanketing Valve Vapor Guard Tank Blanketing Valve What is Tank Blanketing? Features How does it work?
94270 What is Tank Blanketing? blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents. A tank
Chapter 4, Problem 30.
Chapter 4, Problem 30. A well-insulated rigid tank contains 5 kg of a saturated liquid vapor mixture of water at l00 kpa. Initially, three-quarters of the mass is in the liquid phase. An electric resistor
The Shand & Jurs Model Vapor Guard Tank Blanketing Valve
Lower maintenance due to fewer parts Occupies less space, less stress to tank Teflon is inert to most chemicals; extends service life Simplifies and lowers maintenance cost Optimizes flow of blanketing
Chapter 13 Gases, Vapors, Liquids, and Solids
Chapter 13 Gases, Vapors, Liquids, and Solids Property is meaning any measurable characteristic of a substance, such as pressure, volume, or temperature, or a characteristic that can be calculated or deduced,
The most common terms rating air flow capacity are ICFM, FAD, ANR, SCFM or nl/min
Rating of Air Compressors and Air Equipment The most common terms rating air flow capacity are ICFM, FAD, ANR, SCFM or nl/min There is no universal standard for rating air compressors, air equipment and
QUALIFICATION ENVIRONMENTS FOR AMP PROGRAM PROPELLANT TANK ALLIANT TECHSYSTEMS, P/N 80520
QUALIFICATION ENVIRONMENTS FOR AMP PROGRAM PROPELLANT TANK ALLIANT TECHSYSTEMS, P/N 80520 ATK P/N 80520 Table 1: P/N 80520 Propellant Tank Specifications Parameters Requirements Operating Pressure Proof
Physics 7b Midterm Exam #1 Fall Name: Disc. Section SID
Physics 7b Midterm Exam #1 Fall 2004 Name: Disc. Section SID #1 #2 #3 #4 #5 Total M w of O 2 = 32 g/mol, k b =1.38x10-23 J/K, N A =6x10 23 The weight of a 1kg mass on the Earth s surface is 2.2pounds.
FLAME ARRESTOR MODEL L76C-UF
FLAME ARRESTOR MODEL L76C-UF Model L76C-UF The L76C-UF model is designed to inhibit flame propagation in gas piping systems and to protect low pressure tanks containing flammable liquids. Arrestors protect
IRC 2011 All Rights Reserved
1 2 3 The enthalpy of saturated vapor and the enthalpy of saturated liquid is evaluated at the fully accumulated relief device set pressure (P=P set * 1.1 + 14.7). Set Pressure (psig) h fg (Btu/lbm) 150
Your Bonus. Steps for doing the Homework. Make sure you convert to the correct units of measure:
Your Bonus Steps for doing the Homework 1. Read the entire question. 2. Read it again: understand what it is asking. 3. Apply the appropriate formula (from page 5 of the Handout Packet). 4. Write the formula
Honors Chemistry Unit 7 Gas Laws Notes
Honors Chemistry Unit 7 Gas Laws Notes Kinetic Molecular Theory 1. List the five assumptions: Assumption Description Extra Info 1 Basically means: the particles themselves have compared to the space between
Question McGraw-Hill Ryerson Limited
Question 1 Which of the following cannot be explained by considering the empty space between the particles of a gas? A) Gases are more compressible than liquids. B) Gases have lower viscosities than liquids.
Example: Calculate the density of methane at 50 psig and 32 ⁰F. H.W. In previous example calculate the density of methane in gm/m 3.
Gas density Because the density of a substance is defined as mass per unit volume, the density of gas (ρ g ), at given temperature and pressure can be derived as follows: If P in psia, T in ⁰R and R =
Old-Exam.Questions-Ch-14 T072 T071
Old-Exam.Questions-Ch-14 T072 Q23. Water is pumped out of a swimming pool at a speed of 5.0 m/s through a uniform hose of radius 1.0 cm. Find the mass of water pumped out of the pool in one minute. (Density
PETROLEUM ENGINEERING 310 SECOND EXAM. October 23, 2002
PETROLEUM ENGINEERING 310 SECOND EXM October 23, 2002 Ground Rules Do all your work on the test paper and the space provided for the answer, do no write on the back. Grading will be based on approach and
Figure Vapor-liquid equilibrium for a binary mixture. The dashed lines show the equilibrium compositions.
Another way to view this problem is to say that the final volume contains V m 3 of alcohol at 5.93 kpa and 20 C V m 3 of air at 94.07 kpa and 20 C V m 3 of air plus alcohol at 100 kpa and 20 C Thus, the
Permitted MSS Emissions Tracking, Recordkeeping, and Reporting. Presented by ACES April 24, 2008
Permitted MSS Emissions Tracking, Recordkeeping, and Reporting Presented by ACES April 24, 2008 1 Agenda Introductions Overview of Current MSS Permitting Program Status Discussion of Model MSS Permit Requirements
The capacity of the cargo tank venting system (46 CFR );
INDUSTRY GUIDELINES FOR DETERMINING THE MAXIMUM LIQUID TRANSFER RATE FOR A TANK VESSEL TRANSFERRING A FLAMMABLE OR COMBUSTIBLE CARGO USING A VAPOR CONTROL SYSTEM This document provides guidance from the
TOPIC: KNOWLEDGE: K1.01 [2.5/2.7] An atmospheric pressure of 15.0 psia is equivalent to... A psig. B psig. C psig.
![TOPIC: KNOWLEDGE: K1.01 [2.5/2.7] An atmospheric pressure of 15.0 psia is equivalent to... A psig. B psig. C psig.](/thumbs/89/99436374.jpg "TOPIC: KNOWLEDGE: K1.01 [2.5/2.7] An atmospheric pressure of 15.0 psia is equivalent to... A psig. B psig. C psig.")
P73 An atmospheric pressure of 15.0 psia is equivalent to... A. 30.0 psig. B. 29.4 psig. C. 14.7 psig. D. 0.0 psig. ANSWER: D. P273 A pressure gauge on a condenser reads 27.0 inches Hg vacuum. What is
Base engine for use in U.S., the U.S. Territories, and Canada
210G / 210G LC 12 13 Engine 210G / 210G LC Base engine for use in U.S., the U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the
ACFM vs. SCFM vs. ICFM Series of Technical White Papers from Squire-Cogswell
ACFM vs. SCFM vs. ICFM Series of Technical White Papers from Squire-Cogswell Squire Cogswell / Aeros Instruments, Inc. 1111 Lakeside Drive Gurnee, IL 60031 Phone: (800) 448-0770 Fax: (847) 855-6304 info@squire-cogswell.com
S.A. Klein and G.F. Nellis Cambridge University Press, 2011
16-1 A flow nozzle is to be used to determine the mass flow rate of air through a 1.5 inch internal diameter pipe. The air in the line upstream of the meters is at 70 F and 95 psig. The barometric pressure
FDE 211 Material & Energy Balances. Instructor: Dr. Ilgin Paker Yikici Fall 2015
FDE 211 Material & Energy Balances Instructor: Dr. Ilgin Paker Yikici Fall 2015 Material& Energy Balances first step in understanding a process leads to a better understanding of a process forces the engineer
and its weight (in newtons) when located on a planet with an acceleration of gravity equal to 4.0 ft/s 2.
1.26. A certain object weighs 300 N at the earth's surface. Determine the mass of the object (in kilograms) and its weight (in newtons) when located on a planet with an acceleration of gravity equal to
Detailed Thermal Inbreathing Analysis for API 12-F Tanks
Detailed Thermal Inbreathing Analysis for API 12-F Tanks July 11, 2016 Background Venting of atmospheric and low pressure storage tanks is an important aspect of the tanks overall design in order to prevent
Technical Committee on LP-Gas at Utility Gas Plants
Technical Committee on LP-Gas at Utility Gas Plants Addendum to the Agenda Sheraton Denver Downtown 1550 Court Place Denver, CO 80202 August 7-8, 2013 The following items relate to item 5.B of the Agenda:
Gases NO CALCULATORS MAY BE USED FOR THESE QUESTIONS
NO CALCULATORS MAY BE USED FOR THESE QUESTIONS Questions 1-3 refer to the following gases at 0 C and 1 atm. (A) Ar (B) NO 2 (C) Xe (D) H 2 (E) N 2 1. Has an average atomic or molecular speed closest to
The Hoffman Specialty Series 2000 consists of main
Pressure and/or Temperature Pilot Operated Steam Series 2000 The Hoffman Specialty Series 2000 consists of main valves, pilot valves, wells and hardware kits. They are designed to meet a wide range of
Problems of Chapter 3
Problems of Chapter 3 Section 3.1 Molecular Model of an Ideal Gas 3. A sealed cubical container 20 cm on a side contains three times Avogadro s number of molecules at a temperature of 20 C. Find the force
Single & Headered Relief Vent Piping Analysis
Single & Headered Relief Vent Piping Analysis Todd Jekel, Ph.D., P.E. Industrial Refrigeration Consortium 2005 Research & Technology Forum January 21, 2005 Madison, WI 1 Purpose Vent piping requirements
Best Practices for Installation of Gaseous Sample Pumps
Best Practices for Installation of Gaseous Sample Pumps Goal of the Gas Sample Pump Transport a clean, reliable, sample of the process gas to the analyzer, in the safest and easiest way possible, to ensure
My Website:
PH202 Recitation Week 06 Problem Set Winter 2015 Ryan Scheirer Email: scheirer@onid.orst.edu My Website: http://people.oregonstate.edu/~scheirer/ph202_rec.html Problem 01 If you double the speed of molecules
CHM 111 Unit 5 Sample Questions
Name: Class: Date: As you work these problems, consider and explain: A. What type of question is it? B. How do you know what type of question it is? C. What information are you looking for? D. What information
Properly Purge and Inert Storage Vessels
Properly Purge and Inert torage Vessels George R. Kinsley, Jr., Environmental Resources Management, Inc. Inert gases are used to prevent fires and explosions in the vapor spaces of equipment. Correct selection
5.0 Neutral Buoyancy Test
5.0 Neutral Buoyancy Test Montgolfier balloons use solar energy to heat the air inside the balloon. The balloon used for this project is made out of a lightweight, black material that absorbs the solar
Unit 2 Kinetic Theory, Heat, and Thermodynamics: 2.A.1 Problems Temperature and Heat Sections of your book.
Unit 2 Kinetic Theory, Heat, and Thermodynamics: 2.A.1 Problems Temperature and Heat Sections 10.1 10.2 of your book. Convert the following to Celsius and Kelvin temperatures: 1. 80.0 o F Early E. C.:
Gas Turbine Performance Analysis
Gas Turbine Performance Analysis Gas turbines may seem too complicated or overwhelming at first glance, but for regular field monitoring on a relative basis, it is not all that difficult. A regular check
OVERVIEW. Flow Coefficient C v. Operating Conditions. Specific Gravity
VERVIEW This valve sizing software program is based on the use of nomenclature and sizing equations from ISA Standard S75.01 and IEC Standard 534-2. The sizing equations are based on equations for predicting
17. CARGO MEASUREMENT AND CALCULATION
Page 1 17. CARGO MEASUREMENT AND CALCULATION 17.1 GENERAL Liquefied gas cargoes are measured and calculated in a similar manner to that of other bulk liquid cargoes such as crude oils and petroleum products.
Natural Gas Gathering
Natural Gas Gathering Course No: R04-002 Credit: 4 PDH Jim Piter, P.E. Continuing Education and Development, Inc. 9 Greyridge Farm Court Stony Point, NY 10980 P: (877) 322-5800 F: (877) 322-4774 info@cedengineering.com
Ratio Regulator Zero Governor. FRG/6 Series
Ratio Regulator Zero Governor FRG/6 Series CSA Certified ANSI Z21.18 / CSA 6.3 CSA Requirement # 5.01 Zero Governor and Gas/Air Regulator File # 157406 US and Canadian Models FRG 705/6 FRG 707/6 FRG 710/6
Practical Guide. By Steven T. Taylor, P.E., Member ASHRAE
ractical Guide The following article was published in ASHRAE Journal, March 2003. Copyright 2003 American Society of Heating, Refrigerating and Air- Conditioning Engineers, Inc. It is presented for educational
DATA BOOK. for Cryogenic Gases and Equipment
DATA BOOK for Cryogenic Gases and Equipment Common Equivalents & Conversions WARNING Don t become a casualty! Beware of confined spaces where there is insufficient oxygen to support life. Types of confined
Focus on VOC Emissions Reduction Using an Oxygen Based Inerting Control System For Inert Gas Blanketing of Chemical Process Vessels
Inerting Control Systems by NTRON PROCESS ANALYZER DIVISION of NEUTRONICS INC. EXTON. PA. 19341 RJN Rev. A June 2001 Focus on VOC Emissions Reduction Using an Oxygen Based Inerting Control System For Inert
PHYS 101 Previous Exam Problems
PHYS 101 Previous Exam Problems CHAPTER 14 Fluids Fluids at rest pressure vs. depth Pascal s principle Archimedes s principle Buoynat forces Fluids in motion: Continuity & Bernoulli equations 1. How deep
ANDERSON GREENWOOD TANK BLANKETING REGULATORS
Part of a complete system that incorporates a pilot operated, dome-loaded diaphragm type regulator capable of reducing blanketing gas in a single step, providing bubble-tight shut-off and low maintenance.
EZI-DRY Pty Limited ABN:
EZI-DRY Pty Limited ABN: 98 114 507 443 PO Box 370 Phone: 02 49711993 Swansea NSW 2281 Fax: 02 49716320 Mobile: 0427587900 Email: ezidry@exemail.com.au 1. Breather operation Why EZI-DRY Breathers? Most
ASSIGNMENT 2 CHE 3473
DUE: May 23 ASSIGNMENT 2 CHE 3473 #Problem 1: 3.3 #Problem 2: 3.4 #Problem 3: 3.5 #Problem 4: 3.6 #Problem 5: 3.7 #Problem 6: 3.8 #Problem 7: 3.11 #Problem 8: 3.15 #Problem 9: 3.22 #Problem 10: 3.32 #Problem
ASSIGNMENT 2 CHE 3473
DUE: May 21 ASSIGNMENT 2 CHE 3473 #Problem 1 Read Chapter 3. ALL OF IT. Time yourself and report the time. #Problem 2: 3.2 #Problem 3: 3.3 #Problem 4: 3.5 #Problem 5: 3.6 #Problem 6: 3.7 #Problem 7: 3.8
POP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS
POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety
StocExpo Conference 2013, Antwerp. Dipl.-Ing. Axel Sommer Braunschweiger Flammenfilter GmbH (PROTEGO)
StocExpo Conference 2013, Antwerp Dipl.-Ing. Axel Sommer Braunschweiger Flammenfilter GmbH (PROTEGO) Where Do My Storage Tank Losses Come From? Storage Tanks Have to Breath Why Overpressure Protection?
EXERCISES Gas Laws. Chooise the correct answer
Alícia Rosa EXERCISES Gas Laws Chooise the correct answer 1 Atmospheric pressure at an altitude of 10 km is 2.1x10 2 mm. What is the pressure in atmospheres at 10 km? 1.6x10 5 atm 3.6 atm 0.28 atm 2 Atmospheric
Diagnosing EVAP systems By: Bernie Thompson
Diagnosing EVAP systems By: Bernie Thompson Perhaps one of the toughest jobs in the automotive field is diagnosing small leaks, especially A/C and Fuel Vapor (EVAP) leaks. Finding these leaks can be time
EXAMPLES OF COMPLIANCE METHODS FOR MONITORING AND RECORDKEEPING RCRA SUBPARTS BB AND CC. Tennessee Operations Eastman Chemical Company
EXAMPLES OF COMPLIANCE METHODS FOR MONITORING AND RECORDKEEPING RCRA SUBPARTS BB AND CC Tennessee Operations Eastman Chemical Company 1 Tennessee Operations of Eastman Chemical Company Large Manufacturing
GAS CONDENSATE RESERVOIRS. Dr. Helmy Sayyouh Petroleum Engineering Cairo University
GAS CONDENSATE RESERVOIRS Dr. Helmy Sayyouh Petroleum Engineering Cairo University Introduction and Definitions Gas condensate production may be thought of as a type intermediate between oil and gas. The
APPENDIX A: SENSITIVITY TESTS INPUTS AND SETUP TABLES
APPENDIX A: SENSITIVITY TESTS INPUTS AND SETUP TABLES This appendix contains two tables for each case and model; the first outlines the assumptions and inputs that were kept constant for each case, and
Auto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
Expansion Tank Design (Chilled Water)
Expansion Tank Design (Chilled Water) Table of Contents 1.0 Introduction... 2 1.1 Units... 2 2.0 Disclaimer... 2 3.0 Expansion Tank Types... 2 3.1 Open Tank... 2 3.2 Closed Tank with No Bladder... 3 3.3
LPS Product Guide. LPS Series Nitrogen Generators. N2-GEN LPS TM - Layup Protection System Copyrighted All Rights Reserved
LPS Product Guide N2-GEN LPSTM LPS Series Nitrogen Generators N2-GEN LPS TM - Layup Protection System Copyrighted All Rights Reserved - 2014 p 888 526 6284 e info@southteksystems.com w www.southteksystems.com
Gas Law Worksheets - WS: Boyle s and Charles Law
Gas Law Worksheets - WS: Boyle s and Charles Law Boyle s Law states that the volume of a gas varies inversely with its pressure if temperature is held constant. (If one goes up the, other goes down.) We
Application Worksheet
Application Worksheet All dimensions are nominal. Dimensions in [ ] are in millimeters. Service Conditions Medium Through Valve: Required C v : Temperature Maximum: Minimum: Normal: Flow Maximum: Minimum:
Name Chemistry Pre-AP
Name Chemistry Pre-AP Notes: Gas Laws and Gas Stoichiometry Period Part 1: The Nature of Gases and The Gas Laws I. Nature of Gases A. Kinetic-Molecular Theory The - theory was developed to account for
Chemistry 51 Chapter 7 PROPERTIES OF GASES. Gases are the least dense and most mobile of the three phases of matter.
ROERIES OF GASES Gases are the least dense and most mobile of the three phases of matter. articles of matter in the gas phase are spaced far apart from one another and move rapidly and collide with each
pumping gases JET PUMP TECHNICAL DATA
Section 1000 Bulletin 100 Issued 9/87 Replaces 7/84 JET PUMP TECHNICAL DATA pumping gases This technical bulletin includes general information about Penberthy Jet Pumps plus specific details for selecting
COPYRIGHT. Reservoir Fluid Core. Single Phase, Single Component Systems. By the end of this lesson, you will be able to:
Single Phase, Single Component Systems Learning Objectives Reservoir Fluid Core Single Phase, Single Component Systems By the end of this lesson, you will be able to: Define terms used to describe the
Gianluca Gemme LN2 DISTRIBUTION PLANT
Gianluca Gemme LN2 DISTRIBUTION PLANT Design parameters Cryogen Liquid Nitrogen Volume 200 l (one trap) Heat load 300 W (one trap) Trap cold mass 500 Kg Number of traps 4 Liquid nitrogen input 7.10 l/h
Compressed Gas ER Fundamentals
Compressed Gas ER Fundamentals Jan 2015 Compressed Gases Represent over 66% of RMP Chemicals PHMSA's 2012 Emergency Response Guidebook provides first responders with a go-to manual to help deal with hazmat
Pressure Control. where: p is the pressure F is the normal component of the force A is the area
Pressure Control First of all, what is pressure, the property we want to control? From Wikipedia, the free encyclopedia. Pressure is the application of force to a surface, and the concentration of that
PURE SUBSTANCE. Nitrogen and gaseous air are pure substances.
CLASS Third Units PURE SUBSTANCE Pure substance: A substance that has a fixed chemical composition throughout. Air is a mixture of several gases, but it is considered to be a pure substance. Nitrogen and
Quiz #1 Thermodynamics Spring, 2018 Closed Book, Open Appendices, Closed Notes, CLOSED CALCULATORS
Quiz #1 Closed Book, Open Appendices, Closed Notes, CLOSED CALCULATORS An astronaut has a mass of 161 lbm on the surface of the earth. Calculate his weight (in lbf) on planet Rigel 4 where g = 20.0 ft/s
Comments on Homework. Class 4 - Pressure. Atmospheric Pressure. Gauge vs. Absolute Pressure. 2. Gauge vs. Absolute Pressure. 1.
Class 4 - Pressure 1. Definitions 2. Gauge Pressure 3. Pressure and Height of Liquid Column (Head) 4. Pressure Measurement and Manometers Please don t forget the special problem for the next HW assignment
Chapter 14 Practice Problems
Chapter 14 Practice Problems In problems that require the atomic masses (atomic weights) of atomic hydrogen, oxygen, nitrogen, and carbon, we will use the rounded values, 1, 16, 14, and 12, respectively.
Venting Atmospheric and Low-pressure Storage Tanks API STANDARD 2000 SEVENTH EDITION, MARCH 2014
Venting Atmospheric and Low-pressure Storage Tanks API STANDARD 2000 SEVENTH EDITION, MARCH 2014 Special Notes API publications necessarily address problems of a general nature. With respect to particular
SIZING THE EXTROL DIAPHRAGM-TYPE HYDRO-PNEUMATIC TANK
SIZING THE EXTROL DIAPHRAGM-TYPE HYDRO-PNEUMATIC TANK 1400 Division Road, West Warwick, RI 02893 T: 401.884.6300 F: 401.885.2567 www.amtrol.com Sizing the ExTrol Diaphragm-Type Hydro-Pneumatic Tank For
The Hydrological Cycle
Introduction to Climatology GEOGRAPHY 300 The Hydrological Cycle Tom Giambelluca University of Hawai i at Mānoa Atmospheric Moisture Changes of Phase of Water Changes of Phase of Water 1 Changes of Phase
Gases. Edward Wen, PhD
Gases Edward Wen, PhD Properties of Gases expand to completely fill their container take the shape of their container low density much less than solid or liquid state compressible when pressure is changed.
In the name of Allah
In the name of Allah Physical chemistry- 2 nd state semester 1 Petroleum and petrochemical engineering. Lecture No. 1 General Introduction In Physical Chemistry 16-10-2016 Assistance prof. Dr. Luma Majeed
Unit 8: Gases and States of Matter
Unit 8: Gases and States of Matter Gases Particles that have no definite shape or volume. They adapt to the shape and volume of their container. Ideal gases are imaginary gases that comply with all the
Constant-Volume Process
Constant-Volume Process A constant-volume process is called an isochoric process. Consider the gas in a closed, rigid container. Warming the gas with a flame will raise its pressure without changing its
DISTILLATION POINTS TO REMEMBER
DISTILLATION POINTS TO REMEMBER 1. Distillation columns carry out physical separation of liquid chemical components from a mixture by a. A combination of transfer of heat energy (to vaporize lighter components)
PROPERTIES OF R-134A (1,1,1,2-TETRAFLUOROETHANE)
PROPERTIES OF R-134A (1,1,1,2-TETRAFLUOROETHANE) Industrial Refrigeration Consortium University of Wisconsin Madison, WI USA Who we Are The IRC is a collaborative effort between the University of Wisconsin-Madison
The Kinetic-Molecular Theory of Gases based on the idea that particles are always in motion
The Kinetic-Molecular Theory of Gases based on the idea that particles are always in motion Five assumptions: 1. Most of the volume occupied dby a gas is empty space 2. Collisions between gas particles
BULK SPECIFIC GRAVITY AND UNIT WEIGHT OF COMPACTED HOT MIX ASPHALT (HMA) (Kansas Test Method KT-15)
5.9.15 BULK SPECIFIC GRAVITY AND UNIT WEIGHT OF COMPACTED HOT MIX ASPHALT (HMA) (Kansas Test Method ) 1. SCOPE This method of test covers the procedure for determining the bulk specific gravity of specimens
CRYOGENICS LIQUID NITROGEN AS A NON- POLLUTING FUEL
CRYOGENICS LIQUID NITROGEN AS A NON- POLLUTING FUEL 1 INTRODUCTION: In 1997, the University of North Texas (UNT) and University of Washington (UW) independently developed liquid nitrogen powered vehicles
PRODUCT SELECTION GUIDE
PRODUCT SELECTION GUIDE Pressure/Vacuum Relief Valves Pressure Relief Valves Represented by: Vacuum Relief Valves Pilot Operated Relief Valves Emergency Relief Valves 1185 Tower Road Schaumburg, IL 60173
Tank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
States of Matter Review
States of Matter Review May 13 8:16 PM Physical States of Matter (Phases) Solid Liquid Melting Gas Condensation Freezing Evaporation Deposition Sublimation Sep 13 6:04 PM 1 May 13 8:11 PM Gases Chapter
FIREX200 CLEAN AGENT FIRE SUPPRESSION SYSTEM
CYLINDERS Agent Tank The agent storage tank consists of a high pressure steel tank fitted with a valve and internal siphon tube, factory filled with FIREX200 gas (HFC-227 ea), and super-pressurized with
Model TB 3-16 TECHNICAL BULLETIN. Secure-Gard Pilot Operated Vent Valve (POVV) BENEFITS TYPICAL APPLICATIONS FEATURES
TECHNICAL BULLETIN 1049 - TB 3-16 Model 1049 Secure-Gard Pilot Operated Vent Valve (POVV) ISO Registered Company The Model 1049 is a pilot operated vent valve specifically designed for low-pressure storage
TECHNICAL BULLETIN CRYOGENIC APPLICATION SERVICES. website:
TECHNICAL BULLETIN SERVICES website: email: www.pipingtech.com info@pipingtech.com copyright 2009 Piping Technology & Products, Inc. SERVICES Objective TECHNICAL BULLETIN To determine the amount of ice
Balston Nitrogen Generation Systems
Lower cost...eliminates the need for costly gas cylinders Complete package with prefilters, final filters, and receiving tank Compact - frees up valuable floor space Eliminates unexpected shutdowns due
PENBERTHY SERIES LM, ELL, FL, GL, GH, U, L AND 2NC FOR PUMPING GASES
Practical, simple and cost-effective alternatives for process industries to purge gases from chambers, exhaust, evacuate or prime using liquid, steam or air operating media FEATURES Simple design with
Chapter 13 Gases and Pressure. Pressure and Force. Pressure is the force per unit area on a surface. Force Area. Pressure =
Chapter 13 Gas Laws Chapter 13 Gases and Pressure Pressure and Force Pressure is the force per unit area on a surface. Pressure = Force Area Chapter 13 Gases and Pressure Gases in the Atmosphere The atmosphere
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITIES THIS REPORT WAS PREPARED BY THE ORGANIZATION(S) NAMED BELOW. NEITHRE THE ORGANIZATION(S) BELOW, NOR ANY PERSON ACTING ON BEHALF OF THEM: (A) MAKES
2 Available: 1390/08/02 Date of returning: 1390/08/17 1. A suction cup is used to support a plate of weight as shown in below Figure. For the conditio
1. A suction cup is used to support a plate of weight as shown in below Figure. For the conditions shown, determine. 2. A tanker truck carries water, and the cross section of the truck s tank is shown