AB SEALS PTY. LTD. ABN SEALS YOU CAN RELY ON GRAB KITS O-RINGS BONDED WASHERS, FLANGE SEALS FITTINGS SEALS O-RING TOOLS, LUBRICANTS
|
|
- Vernon Lewis
- 6 years ago
- Views:
Transcription
1 AB SEALS PTY. LTD. ABN Welch St Underwood QLD 4119 Ph Fax sales@abseals.com.au 1/1880 Hume Hwy Campbellfield VIC 3061 Ph Fax vicsales@abseals.com.au SEALS YOU CAN RELY ON GRAB KITS O-RINGS BONDED WASHERS, FLANGE SEALS FITTINGS SEALS O-RING TOOLS, LUBRICANTS EFFECTIVE 1 ST JANUARY 2015 Ver
2 We are proud to announce the release of a new range of Maxi O-Ring kits, possible the most comprehensive kits available in the Australian marketplace. Each consists of 5 compartmented assortment boxes contained in a rugged carry case. These are a must for any service van or as a workshop stock assortment. Ver
3 ORK-MAXI FITTING $ Assorted O-Rings (Nitrile 90 Duro), Flaretites, D-Rings, Bonded Washers, Retainers to suit UNO, SAE & Cat Flanges, BSP, ORFS, JIC fittings UNO O-RINGS NITRILE 90 DURO TO SUIT QTY TO SUIT QTY 0.437" " " " " " " " SAE FLANGE O-RINGS NITRILE 90 DURO 0.500" " " " " " " " " " " " BSP O-RINGS NITRILE 90 DURO 0.125" " " " " " " " " ORFS O-RINGS NITRILE 90 DURO 0.562" " " " " " " " JIC FLARETITE SEALS 0.437" " " " " " " D-RINGS TO SUIT CAT FLANGES 0.750" " " " " " 2 BSP BONDED WASHERS 0.125" " " " " " " " " " BSP RETAINING RINGS 0.125" " " " " " " " Ver
4 ORK-MAXI IMP N7 $ Imperial British Standard Nitrile 70 Duro O-Rings 220 Nitrile 90 Duro O-Rings to suit SAE-J518c Flanges and UNO fittings ORK-MAXI IMP N9 $ Imperial British Standard Nitrile 90 Duro O-Rings 220 Nitrile 90 Duro O-Rings to suit SAE-J518c Flanges and UNO fittings Contents of both ORK-MAXI IMP kits are listed below as arranged in kit. UNO / BOSS O-RINGS SAE FLANGE O-RINGS BS BS222 5 BS BS225 5 BS BS /16" CROSS SECTION BS BS BS BS /32 CROSS SECTION BS BS BS BS BS BS135 5 BS /8" CROSS SECTION BS BS BS BS BS BS BS We will also offer these kits in Viton 75 & 90 Duro, Neoprene 70 Duro, EPDM 75 Duro, Silicone 70 Duro and Nitrile 90 Duro Contoured Backups on request. Empty boxes and Cases are available as a set (ORK-MAXI $ per set. Ver
5 ORK-MAXI MET N7 $ European Standard Metric Nitrile 70 Duro O-Rings sorted by cross section Contents of ORK-MAXI MET listed below as arranged in kit 1.00MM CROSS SECTION ID (MM) QTY ID (MM) QTY ID (MM) QTY MM CROSS SECTION MM CROSS SECTION MM CROSS SECTION MM CROSS SECTION Ver
6 AB SEALS O-RING KITS These kits are assembled in house by AB Seals and are available in 20 compartment clear boxes 355mm x 275mm x 55mm. They can be provided with customized color lid inserts showing you logo and contact details. ORK-ORFS/UNO/SAE $ Can be Supplied Marked with J.I.Case, Caterpillar or John Deere equivalent numbers 20 each Nitrile 90 Duro O-Rings for ORFS -09 to each Nitrile 90 Duro O-Rings for SAE-J518c-12 to -20 Code 61 & 62 Flanges 20 each Nitrile 90 Duro O-Rings for UNO -07 to each Nitrile 90 Duro O-Rings for UNO -26 to -30 ORK-ORFS/UNO/SAE V9 $ Can be Supplied Marked with J.I.Case, Caterpillar or John Deere equivalent numbers 20 each Viton 90 Duro O-Rings for ORFS -09 to each Viton 90 Duro O-Rings for SAE-J518c-12 to -20 Code 61 & 62 Flanges 20 each Viton 90 Duro O-Rings for UNO -07 to each Viton 90 Duro O-Rings for UNO -26 to -30 ORK-BSP FITTING $ each Nitrile 90 Duro O-Rings for BSP-02 to each Bonded Washers for BSP-02 to each metal Retainer Rings (used with O-Rings) for BSP-04 to -16 ORK-BWBSP $ each Bonded Washers for BSP-02 to each Bonded Washers for BSP-20 to -24 ORK-BWM $ each Bonded Washers for M5 to M30 5 each Bonded Washers for M33 to M48 ORK-1/8 N7 $ Total of 300 British Standard Imperial Nitrile 70 Duro O-Rings BS209 to BS228 ORK-1/8 N9 $ Total of 300 British Standard Imperial Nitrile 90 Duro O-Rings BS209 to BS228 Ver
7 ORK-1/8 BU $ Total of 300 British Standard Imperial Nitrile Contoured Backups BS209 to BS228 ORK-1/8 E7 $ Total of 300 British Standard Imperial EPDM 75 Duro O-Rings BS209 to BS228 ORK-1/8 V7 $ Total of 300 British Standard Imperial Viton 75 Duro O-Rings BS209 to BS228 ORK-1/8 S7 $ Total of 300 British Standard Imperial Silicone 70 Duro O-Rings BS209 to BS228 CATERPILLAR EQUIVALENT O-RING KITS O-Ring kits are supplied in sturdy briefcase type boxes, with the smaller sizes contained in sturdy Ziploc bags. D-Ring kits are supplied in compartmented boxes. Caterpillar numbers are listed as a reference only, all parts are aftermarket. ORK-4C4782 $ Nitrile O-Rings in the 32 most popular Caterpillar sizes, covering fittings, valves and pumps ORK-4C8253 $ yellow Silicone O-Rings in 32 popular Caterpillar sizes, all listed by Caterpillar equivalent part number ORK-4C4784 $ each 1P3700 to 1P3707 ( ¾ to 2 1/8 ) D-Rings 5 each 1P3708 to 1P3709 (2 ¼ to 2 ½ ) D-Rings Ver
8 At AB Seals we are happy to design and assemble custom grab kits from our huge range of stock lines. These can be labeled with your own part numbers for each item and supplied with a full color laminated lid inserts. These can also bear your company logos and contact details. Some of our existing customized kits include special material O-Ring kits, washer assortments, complete machinery spare part and service kits. The only limitation is if the parts will fit! Our standard container is 20 compartments and measures 355mm x 275mm x 55mm, but many others are available at short lead times. Any standard Nitrile O-Ring kit can also be converted to the corresponding backup kit or alternative material kit providing all components are available Ver
9 These sets of 5 o-ring kits represent the best value for money. 5 complete grab kits for the same price as one genuine kit. No compromises made on material quality. We buy in bulk to pass the savings onto you. ORK-OK2SETN7 SET OF 5 O-RING GRAB KITS NITRILE 70 DURO CONTAINS THE FOLLOWING KITS: 1/16 CROSS SECTION IMPERIAL $ CODE 2) 3/32 CROSS SECTION IMPERIAL $ CODE 2) GENERAL IMPERIAL ASSORTMENT $ CODE 2) GERMAN STANDARD METRIC $ CODE 2) JAPANESE STANDARD JIS METRIC $ CODE 2) ONLY $ PER SET CODE 4 ORK-OK2SETN9 SET OF 5 O-RING GRAB KITS NITRILE 90 DURO CONTAINS THE FOLLOWING KITS: 1/16 CROSS SECTION IMPERIAL $ CODE 2) 3/32 CROSS SECTION IMPERIAL $ CODE 2) GENERAL IMPERIAL ASSORTMENT $ CODE 2) GERMAN STANDARD METRIC $ CODE 2) JAPANESE STANDARD JIS METRIC $ CODE 2) ONLY $ PER SET CODE 4 THEY RE GREAT VALUE, WHY NOT GRAB A SET TODAY? Ver
10 GENERIC O-RING KITS ORK-IMP N7 $ Total of 382 British Standard Imperial Nitrile 70 Duro O-Rings BS006 to 012 (20 each) BS110 to 116 (13 each) BS210 to 222 (10 each) BS325 to 327 (7 each) ORK-IMP V7 $ Total of 382 British Standard Imperial Viton 75 Duro O-Rings Sizes as per ORK-IMP N7 ORK-IMP C7 $ Total of 382 British Standard Imperial Neoprene 70 Duro O-Rings Sizes as per ORK-IMP N7 ORK-IMP E7 $ Total of 382 British Standard Imperial EPDM 80 Duro O-Rings Sizes as per ORK-IMP N7 ORK-IMP S7 $ Total of 382 British Standard Imperial Silicone 70 Duro O-Rings Sizes as per ORK-IMP N7 ORK-BU $ Total of 364 British Standard Imperial contoured Nitrile Backups BS006 to 012 (10 each) BS110 to 116 (14 each) BS210 to 222 (14 each) ORK-BUT $ Total of 364 British Standard Imperial Solid PTFE Backups Sizes as per ORK-BU ORK-QUAD $ Total of 382 British Standard Imperial Nitrile 70 Duro O-Rings Sizes as per ORK-IMP N7 Ver
11 ORK-JIS $ Total of 444 Japanese Industrial Standard Nitrile 70 Duro O-Rings P003-N7 to P025-N7 G025-N7 to G060-N7 ORK-JIS N9 $ Total of 444 Japanese Industrial Standard Nitrile 90 Duro O-Rings P003-N7 to P025-N7 G025-N7 to G060-N7 ORK-MET N7 $ Total of 428 Metric European standard Nitrile 70 Duro O-Rings 5 x 2 to 13 x 2 (6 sizes) 10 x 2.5 to 22 x 2.5 (9 sizes) 19 x 3 to 38 x 3 (13 sizes) 39 x 4 to 48 x 4 (4 sizes) ORK-9A $ Total of 410 Metric European standard Nitrile 70 Duro O-Rings 3 x 2 to 78 x 2 (60 sizes) ORK-9B $ Total of 228 Metric European standard Nitrile 70 Duro O-Rings 3 x 3 to 78 x 3 (60 sizes) Ver
12 O-RING CORD SPLICING KITS ORK-IMP SPLICING $ Extruded Nitrile 70 Duro O-Ring Cord 1 metre each of 1/16 nom., 3/32 nom., 1/8 nom., 3/16 nom., ¼ nom. 20g adhesive, knife, cutting guide ORK-MET SPLICING $ Extruded Nitrile 70 Duro O-Ring Cord 1 metre each of 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 5mm, 5.7mm, 7mm 20g adhesive, knife, cutting guide A great investment for a mobile operation. Each kit contains lengths of quality Nitrile (NBR) o-ring cord, a knife and a bottle of adhesive bond. Measure the length of o-ring you require, put the cord into the cutting block to make a clean cut and then bond the ends of the cord together. In no time at all you will have a custom made o-ring to fix your job. Not suitable for o-rings in dynamic applications. Ver
13 TOOLS & LUBRICANTS We are also able to offer a range of picks and O-Ring measuring tools CONE-9U5155 $ Just check your section in the notches on the base and then drop the O-Ring over the cone until it rest neatly on a step and read your size number. Covers 184 common Imperial British standard sizes TOOL-ORING CHART A2 $ Set of 3 A2 laminated sheets showing exact Imperial size O-Ring profiles. KC $ Set of 4 Chrome Vanadium tipped picks KC $ Set of 4 picks, Phillip #0, 3mm Blade, T15 & T20 Star drivers in plastic case TOOL-PICKSET-8PCE $ Set of 8 heavy duty picks in a blow molded case Ver
14 AB Seals are proud to offer Point-Of-Sale stands featuring blister packs of the most common fitting O- Rings and seals. We supply the complete stand, with signs, hooks and 2 complete sets of blister packed parts as listed below. All packs are available separately to restock, with an easy to use reorder form. Parts include O-Rings to suit BSP -02, -04, -06, -08, -12, -16, -20, -24, -32 SAE-J518C flanges -08, -12, -16, -20, -24, -32, -40 UNO -07, -09, -12, -14, -17, -21, -26, -30 ORFS -09, -11, -13, -16, -19, -23, -32 Flaretite Seals to suit JIC-07, -09, -12, -14, -17, -21, -26, -30 Bonded Washers to suit BSP -02, -04, -06, -08, -10, -12, -14, -16, -20, -24 Retaining Rings to suit BSP -02, -04, -06, 08, -12, -16, -20, -24 D-Rings to suit Cat flanges ¾, 1, 1 ¼, 1 ½, 1 ¾, 2, 2 ¼, 2 ½ All packs are labeled with the pack part number, the fitting type, dash number and fractional size, and qty contained. Stand can also be supplied with customized blister pack labels showing your address and a contact phone number. Please specify on ordering if you wish to take this option. This entire unit is available for just $ GST (CODE 1) (Part number complete POS-FITTING STAND) Ver
15 AB Seals is also sells individual blister packs from the stand for use at your sales counter. The initial range includes seals and O-Rings for common hydraulic fittings as detailed below. All parts are labeled with the pack part number, fitting type, dash number and fractional size, and quantity contained. The blisterpacks are suitable for use with our mesh stands or any standard mesh slat wall or loop hooks. The initial range consists of 66 products as detailed overleaf, which include O-Rings for BSP, UNO, SAE, ORFS Flaretite seals for JIC Cat D-Rings BSP Retaining rings BSP Bonded washers Plumbing O-Rings and washers Grab n Go Handipaks are a great way to save time and effort on counter sales - simply identify the fitting size and type and direct the customer to the correct Handipak conveniently located in you sales area. Blisterpacks come as standard as shown above but can be supplied with customized labels showing your logo and contact number. Total packs must be ordered in multiples of 30 (ie30, 60, 90 of any combination of packs) to allow for printing of custom labels. Ver
16 PART NUMBER DESCRIPTION LIST PART NUMBER DESCRIPTION LIST PACK-ORBSP02 1/8" BSP O-RING $2.50 PACK-FTJIC30 1 7/8" JIC FLARETITE $41.22 PACK-ORBSP04 1/4" BSP O-RING $5.01 PACK-BWBSP02 1/8" BSP DOWTY $5.62 PACK-ORBSP06 3/8" BSP O-RING $5.01 PACK-BWBSP04 1/4" BSP DOWTY $5.62 PACK-ORBSP08 1/2" BSP O-RING $6.25 PACK-BWBSP06 3/8" BSP DOWTY $6.25 PACK-ORBSP12 3/4" BSP O-RING $7.49 PACK-BWBSP08 1/2" BSP DOWTY $6.88 PACK-ORBSP16 1" BSP O-RING $7.49 PACK-BWBSP10 5/8" BSP DOWTY $8.75 PACK-ORBSP20 1 1/4" BSP O-RING $8.75 PACK-BWBSP12 3/4" BSP DOWTY $9.37 PACK-ORBSP24 1 1/2" BSP O-RING $9.99 PACK-BWBSP14 7/8" BSP DOWTY $6.88 PACK-ORBSP32 2" BSP O-RING $12.50 PACK-BWBSP16 1" BSP DOWTY $7.49 PACK-ORSAE08 1/2" FLANGE O-RING $5.01 PACK-BWBSP20 1 1/4" BSP DOWTY $11.24 PACK-ORSAE12 3/4" FLANGE O-RING $6.25 PACK-BWBSP24 1 1/2" BSP DOWTY $12.50 PACK-ORSAE16 1" FLANGE O-RING $7.49 PACK-RRBSP02 1/8" BSP RETAINER $7.49 PACK-ORSAE20 1 1/4" FLANGE O-RING $5.01 PACK-RRBSP04 1/4" BSP RETAINER $7.49 PACK-ORSAE24 1 1/2" FLANGE O-RING $6.25 PACK-RRBSP06 3/8" BSP RETAINER $7.49 PACK-ORSAE32 2" FLANGE O-RING $7.49 PACK-RRBSP08 1/2" BSP RETAINER $7.49 PACK-ORSAE40 2 1/2" FLANGE O-RING $8.75 PACK-RRBSP12 3/4" BSP RETAINER $9.37 PACK-ORUNO07 7/16" UNO O-RING $3.74 PACK-RRBSP16 1" BSP RETAINER $5.01 PACK-ORUNO09 9/16" UNO O-RING $5.01 PACK-RRBSP20 1 1/4" BSP RETAINER $6.25 PACK-ORUNO12 3/4" UNO O-RING $6.88 PACK-RRBSP24 1 1/2" BSP RETAINER $6.25 PACK-ORUNO14 7/8" UNO O-RING $7.49 PACK-CATD12 3/4 D-RING $11.24 PACK-ORUNO17 1 1/16" UNO O-RING $11.24 PACK-CATD16 1" D-RING $12.50 PACK-ORUNO21 1 5/16" UNO O-RING $7.49 PACK-CATD20 1 1/4 D-RING $6.25 PACK-ORUNO26 1 5/8" UNO O-RING $9.99 PACK-CATD24 1 1/2" D-RING $6.25 PACK-ORUNO30 1 7/8" UNO O-RING $11.87 PACK-CATD28 1 3/4" D-RING $7.49 PACK-ORFS09 9/16" ORFS O-RING $2.50 PACK-CATD32 2" D-RING $7.49 PACK-ORFS11 11/16" ORFS O-RING $2.50 PACK-CATD36 2 1/4 D-RING $8.75 PACK-ORFS13 13/16" ORFS O-RING $3.74 PACK-CATD40 2 1/2" D-RING $8.75 PACK-ORFS16 1" ORFS O-RING $3.74 PACK-OR08 #8 TAP SPINDLE O-RING $2.50 PACK-ORFS19 1 3/16" ORFS O-RING $5.01 PACK-OR08.5 #8.5 TAP SPLINDLE O-RING $2.50 PACK-ORFS23 1 7/16" ORFS O-RING $5.62 PACK-OR09 #9 GARDEN HODE O-RING $2.50 PACK-ORFS /16" ORFS O-RING $6.25 PACK-OR10 #10 LAUNDRY ARM O-RING $2.50 PACK-ORFS32 2" ORFS O-RING $6.25 PACK-OR14 #14 PLUMBERS O-RING $2.50 PACK-FTJIC07 7/16" JIC FLARETITE $9.99 PACK-SPOUT ASST ASSORTED SPOUT O-RINGS $2.50 PACK-FTJIC09 9/16" JIC FLARETITE $9.99 PACK-TAP ASST ASSORTED TAP O-RINGS $2.50 PACK-FTJIC12 3/4" JIC FLARETITE $10.62 PACK-GARDEN TAP NUT NUT & TAIL WASHERS $2.50 PACK-FTJIC14 7/8" JIC FLARETITE $12.50 PACK-H'HOLD TAP WASHER FIBRE BODY WASHER 1/2"TAP $3.12 PACK-FTJIC17 1 1/16" JIC FLARETITE $16.24 PACK-GARDEN TAP WASHER FIBRE BODY WASHER 5/8"TAP $2.50 PACK-FTJIC21 1 5/16" JIC FLARETITE $18.73 PACK-13MM BODY WASHER EZKLEEN BODY WASHER $3.12 PACK-FTJIC26 1 5/8" JIC FLARETITE $22.48 PACK-BODY WASHR ASST ASSORTED FIBRE WASHERS $5.01 GRAB n GO HANDIPAKS ALL PACKS ARE PRICE CODE 2 Ver
17 We recommend the following high performance lubricants. Molytec Silicone Lubricant is a hi-performance, translucent paste, which is non-toxic, and has an operating range of -50 to +200 C. Silicone Lubricant has very good water repellency, is oxidation resistant and has good adherence to dry surfaces. It is resistant to tracking and demonstrates very low volatility. This is an ideal assembly and operating lubricant for all oil resistant seals and O-Rings. Available as 25g tube Moly-M897 $ gst 100g tube Moly-M813 $ gst 500g tub Moly-M814 $ gst 2kg tub Moly-M815 $ gst All prices are Code 4 Magnalube-G Teflon Based Grease is one of the best operating lubricants available in the marketplace. It constantly deposits a Teflon film on the contact surface surfaces which continually lubricates and protects against corrosion and wear. Magnalube-G is water resistant and will not migrate from hot surfaces. It is serviceable under load conditions to 7000 psi and is both mechanically and chemically stable. Operating range is from -40 to +290 C. 4 cc Blister Tube $ gst 21 g Tube $ gst 100 g Jar $ gst 250 g Jar $ gst 450 g Cartridge $ gst 500 g Tin $ gst 1 kg Tin $ gst 4 kg Tin $ gst All prices are Code 4 Ver
Hose & Fitting Products
AB SEALS ABN 14 602 544 632 3 WELCH ST UNDERWOOD QLD 4119 Ph 07 3341 1200 Fax 07 3341 9399 Email sales@abseals.com.au SEALS YOU CAN RELY ON Hose & Fitting Products Effective 1 ST January 2015 Ver 14.12.03
More informationACCESSORIES INDEX REPLACEMENT SEALS. DOWTY SEALS D Page DOWTY SEALS D-M Page O-RING SEAL TO SUIT UNO X Page 17-1
17-1 INDEX DOWTY SEALS D DOWTY SEALS D-M O-RING SEAL TO SUIT UNO X O-RING SEAL TO SUIT SAE FLANGE Y O-RING SEAL TO SUIT ORFS Z D-RING SEAL TO SUIT CAT FLANGE IP HEAVY DUTY O-RING SEAL YU FLARETITE SEAL
More informationSUPERSmall O-Rings. The Seal Man s O-Ring Handbook
SUPERSmall O-Rings SUPERSmall O-Rings are available in sizes as small as.002 ID, which is 0.0 mm and with cross sections of.008 or 0.08mm. SUPERSmall O-Rings are manufactured out of various materials including
More informationAllegheny York Co. O-Ring. Kits. Experience Inventory Manufacturing1
Allegheny York Co. O-Ring Kits Experience Inventory Manufacturing1 EXPERIENCE. INVENTORY. MANUFACTURING. You need it, we ve got it. Our kits make it even easier to stock the perfect fit for any need. And
More informationFITTING IDENTIFICATION AMERICANT THREAD TYPES APPENDIX ALFAGOMMA // APPENDIX. Dash numers. NPTF (National Pipe Tapered Fuel)
// FITTINGS GUIDelines FITTING IDENTIFICATION numers Most fluid piping system sizes are measured by dash numbers. These are universally used abbreviations for the size of component expressed as the numerator
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationSanitizers. Sanitizers. Sanitizers for Pools & Spas
Sanitizers Sanitizers for Pools & Spas 213 213 IntelliChlor Salt Chlorinator Featured Highlights IntelliChlor Salt Chlorinator IntelliChlor Salt Chlorinator uses common table salt to produce all the chlorine
More informationO-Rings and Seals - Order Today, SHIP TODAY at O-Rings and Seals
O-Rings and Seals N O-Ring Face Seal Metric O-Ring ORFS O-Ring N4 Metric Retaining Ring XO O-Ring O-Ring N4 Port Ends SAE, Metric,, JIS, K4 Retaining Ring SAE O-Ring N4 EOlastic Seal Ring ISO 6149 O-Ring
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationSanitizers. Sanitizers. Sanitizers for Pools & Spas
for Pools & Spas 207 IntelliChlor Salt Chlorinator Featured Highlights IntelliChlor Salt Chlorinator IntelliChlor Salt Chlorinator uses common table salt to produce all the chlorine a pool needs, safely,
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationSpare parts list ( ) Spare parts list high-pressure 9/20-4M *
Spare parts list (5.971-969.0) Spare parts list high-pressure 9/20-4M * 05.05.2015 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list high-pressure 9/20-4M * (5.971-969.0)... 6
More informationPO Box 370 Phone: Swansea NSW 2281 Fax: AUSTRALIA Mobile: Web:
EZI-DRY Pty Limited ABN: 98 114 507 443 PO Box 370 Phone: 0249711993 Swansea NSW 2281 Fax: 0249135490 AUSTRALIA Mobile: 0427587900 Web: www.ezi-dry.com.au Email: ezidry@exemail.com.au INSTRUCTION MANUAL
More information// ADapters GUIDelines
// ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall
More informationINSTALLATION & MAINTENANCE INSTRUCTIONS - ORIGINAL VERSION AVK KNIFE GATE VALVES
1. INTRODUCTION The AVK knife gate valve is a unique, patented, bi-directional on-off valve that ensures a bubble-tight shut off. The valve is available with body of ductile iron and seat of nitrile, viton,
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationParts Manual HEAVY DUTY RIGHT HAND ARM
Parts Manual HEAVY DUTY RIGHT HAND ARM Thank you for your purchase of a new Labrie. To ensure maximim reliability, on genuine replacement parts. Labrie Plus replacement parts are designed and manufactured
More informationTechnical Information Ball valves for high pressure applications
Technical Information Ball valves for high pressure applications General Please ensure that the maximum pressure is in complicance with all connexions in the system. Ball valves generally should not be
More informationGeneral Performance Data Hose Ref Minimum Bend. Safety Pressure at 20 C (BAR) Working Pressure at. Flow Rate at 3 bar (lit/min) Working Pressure
The Classic range provides a safe and taint free conveyance of potable water supplies for Domestic and Commercial plumbing applications. The range is designed to achieve robust and flexible solutions with
More informationRectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron
Ring Materials: Temp. Range 15% Glass filled PTFE -268 to 288 40% ronze filled PTFE -268 to 288 40% Glass Reinforced Nylon -240 to 149 15% Graphite Filled PTFE -72 to 232 15% Glass, 5% Moly Filled PTFE
More informationCB 350. Spare parts list. Hydraulic concrete buster. CB 350 s/n DEQ Construction Tools GmbH No
CB 350 Spare parts list Hydraulic concrete buster CB 350 s/n DEQ179000-2018 Construction Tools GmbH No. 3390803501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationSpare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 24.06.2016 www.kaercher.com EN Page 2 / 51 Page 3 / 51 Page 4 / 51 Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0)
More informationBladder Accumulators High pressure
Bladder Accumulators High pressure 1. DESCRIPTION 1.1. FUNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas (nitrogen) is utilised in
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationDAV Series. DAV-MH Air Release & Vacuum Break Valves
DAV-MH Air Release & Vacuum Break Valves ISO 9 AVFI Pty Ltd 4 Enterprise Drive Bundoora Vic 383 p: 3 8467 f: 3 8467 99 e: avfi@avfi.com.au w: www.avfi.com.au General DAV-MH Air Release and Vacuum Break
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationSEries 29 Hydrant valves installation, operation & maintenance manual
Instruction for use Thank you for selecting an AVK product. With correct use, it will give long and reliable service. This manual has been prepared to assist you install, operate and maintain the valve
More informationUltra Concentrate Dispensing System
QC Ultra Concentrate Dispensing System Installation and Operation Manual QC Satellite Mop: QC Central Supply: QC Satellite Spray Bottle: - QC Satellite AG Mop - QC Central Supply AG - QC Satellite AG Spray
More informationInline Swivels Switch Your Swivel!
Inline Swivels Switch Your Swivel! HOW TO ORDER BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SERIES ( ) THREAD SIZE MULTIPLES OF 100 FOR N.P.T.F. MULTIPLES OF 16 FOR J.I.C., O.R.B.
More informationSATURNSERIES INTERCHANGE > ISO (for the couplings)
Saturn Block INTERCHANGE > ISO 16028 (for the couplings) PATENTED ISO 16028 TECHNICAL FEATURES AND OPTIONS Interchange ISO 16028 (for the couplings) Sealing description Nitrile NBR Connection system Push
More informationATS430 turbidity sensor Retractable insertion assembly
A MEASUREMENT & ANALYTICS INSTRUCTION ATS430 turbidity sensor Retractable insertion assembly Measurement made easy 1 Introduction This publication details installation procedures for the retractable insertion
More informationCYL KNIFE GATE VALVES San Sebastian Spain
CYL KNIFE GATE VALVES San Sebastian Spain INSTALATION, OPERATION & MAINTENANCE INSTRUCTIONS (XD HIGH PRESSURE) INTRODUCTION The CYL knife gate valve is a unique, patented, low cost, bi-directional on-off
More informationInstruction Manual Updated 7/26/2011 Ver. 2.2
4-Unit Model MB HTHP Filter Press #171-50-4: 115-Volt #171-51-4: 230-Volt Instruction Manual Updated 7/26/2011 Ver. 2.2 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:
More informationHYQUEST SOLUTIONS PTY LTD INSTRUCTION MANUAL TIPPING BUCKET RAIN GAUGE MODEL TB6
INSTRUCTION MANUAL TIPPING BUCKET RAIN GAUGE MODEL TB6 QUALITY SYSTEM ISO:9001 CERTIFIED HYQUEST SOLUTIONS PTY LTD PO BOX 332, LIVERPOOL B.C NSW 1871, AUSTRALIA Phone:(Int.) 612 9601 2022 Fax: :(Int.)
More informationWS Series WS-BOP Series. canada.dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU WS Series WS-BOP Series Customer Service: 877.963.4966 High Pressure Wingstyle Hydraulic Couplings Applications:
More informationMetric Porcelain Enamel Powder Pump
Instruction Sheet P/N 06 83D Metric Porcelain Enamel Powder Pump. Introduction This instruction sheet covers the Metric Porcelain Enamel Powder Pump. The pump is a highly efficient venturi-type powder
More informationNeed the part number for an impeller, seal, gasket, or motor? It s all here.
Check here for parts questions Flexible Impeller Reference Guide Service Parts & Kits Service & Warranty Information 92 Need the part number for an impeller, seal, gasket, or motor? It s all here. Highlights:
More informationHydraulic comparison test pump Models CPP1000-X, CPP1600-X
Calibration Hydraulic comparison test pump Models CPP1000-X, CPP1600-X WIKA data sheet CT 91.12 for further approvals see page 2 Applications Calibration service companies and service industry Maintenance
More informationPfeiffer. Operating, assembly and maintenance instructions for discontinuous sampling valve Series 27i. 1. Design, operation and dimensions
Operating, assembly and maintenance instructions for discontinuous sampling valve Series 27i This equipment may only be dismounted and disassembled by skilled staff, who are familiar with the assembly,
More informationPneumatic Powered - Plunger Pumps
Models 42/62/82 D Series P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pumps Suggested Installation & Operating Instructions
More informationAging Cell, OFITE Style. Included Items
DRILLING FLUIDS EQUIPMENT For over 30 years OFI Testing Equipment (OFITE) has provided instruments and reagents for testing drilling fluids, well cements, completion fluids, and wastewater. In addition
More informationDiaphragm Accumulators
Diaphragm Accumulators. DESCRIPTION.. FNCTION Fluids are practically incompressible and cannot therefore store pressure energy. The compressibility of a gas is utilised in HYDAC diaphragm accumulators
More informationFraser Bronze Alloy LG2 - BRONZE. Mechanical Properties (Typical) Continuous Cast Centrifugal Cast
Fraser Bronze Alloy LG2 - BRONZE Bronze Bushing Product Information Sheet - LG2 A. W. Fraser Alloy LG2 is a general puspose leaded gunmetal conforming to the requirements of B.S. 1400-1985 Alloy LG2. LG2
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationHydraulic hand spindle pump Models CPP1000-M, CPP1000-L
Calibration Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L WIKA data sheet CT 91.05 for further approvals see page 2 Applications Calibration service companies and service industry Calibrations
More informationRB70 Automatic Diluent Valve Maintenance Manual. Version 1.1 November 2006 Written by Tino de Rijk. Page 1 of 23
RB70 Automatic Diluent Valve Maintenance Manual Version 1.1 November 2006 Written by Tino de Rijk Page 1 of 23 Table of Contents 1. Introduction... 3 2. ADV diagram and parts list (Pre June 2006)... 4
More informationStandard and Low-Flow Metric Powder Feed Pumps
Instruction Sheet P/N 06699E Standard and Low-Flow Metric Powder Feed Pumps Introduction Standard and low-flow metric powder feed pumps are used to deliver organic and metallic powder coatings to powder
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationMODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL
MODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL Index 1. List of components / General arrangement 2. Description 3. Handling 4. Installation 5. Actuators / Operation 6. Maintenance a. Changing
More informationHydraulic Accumulators with Back-Up Nitrogen Bottles
Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the accumulator range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum
More informationSanta Fe Cycles Assembly Guide Introduction
Santa Fe Cycles Assembly Guide Introduction Congratulations on your purchase of your new Santa Fe bicycle. You have purchased a bicycle that has many features and qualities. Please take a few minutes and
More informationBuna-N design resistant to petroleum products. Buna-S design rated for high strength & abrasion resistance.
HOSES Graco offers a wide selection of low and high pressure hoses in every diameter and length to meet your fluid handling needs for chemical compatibility, strength and abrasion resistance. We also provide
More information1. CONDITIONS FOR USE 2. SAFETY
1. CONDITIONS FOR USE This micro abrasive blaster may only be operated: Indoors; Below 6500 ft above sea level altitude; Ambient air temperature between 40-105 F (5-40 C); Maximum relative humidity of
More informationDelVal Flow Controls Private limited
DelVal Flow Controls Private limited (A DIVISION OF DelTech CONTROLS LLC, USA) DelVal Series 50/5, 5A/5B Butterfly Valves INSTALLATION, OPERATION AND MAINTENANCE MANUAL ENGINEERING DATA SHEET E.D.S. NO
More informationHOVAP SERIES 9600 BASICFLOW PROCESS VALVES INSTRUCTION MANUAL
1 CONTENTS 2 Introduction 2 2.1 Valve use 2 2.2 Application area 2 2.3 Incorrect use 2 3 Safety 2 4 Transport and storage 2 5 Installation instructions 2 5.1 Mounting 2 5.2 Installation into pipework 2
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk WIRE ROPE CUTTER RCO40LP PRODUCT CODE No. 980503 INSTRUCTIONS FOR
More informationTribomatic II Powder Pump
Instruction Sheet P/N Tribomatic II Powder Pump WARNING: Allow only qualified personnel to perform the following tasks. Follow the safety instructions in this document and all other related documentation.
More informationUser Instruction Manual
User Instruction Manual 4500 psi Air Compressor Ver 2, 1.18 Contents Parts Included...3 Assembly Instructions...3-5 Operation Instructions...6-7 Oil Change Intervals...8 Air Filter Replacement...9 Setting
More informationT130/T131/T147. Economy Basket Stretcher with Lifting Kit
T130/T131/T147 Economy Basket Stretcher with Lifting Kit User s Manual PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE BASKET STRETCHER! ASPLI SAFETY LTD, 209-211 HUNSLET ROAD, LEEDS, LS10 1PF.
More informationPrimary Terminals & Connectors
Primary & Pure electrolytic copper with electro-tin plating for corrosion resistance Deep internal serrations promote firm wire grip for maximum strength Insulation (where applicable) is color coded to
More informationSpare parts list ( ) Spare parts list HDS 700 B
Spare parts list (5.955-875.0) Spare parts list HDS 700 B 02.09.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HDS 700 B (5.955-875.0)... 6 10 Individual parts... 7 11
More informationPush-Lok 801/804/821/836 Hose and Fittings
Push-Lok 801/804/821/836 Hose and Fittings Parker Push-Lok The Most Complete Line of Premium-Quality, Low-Pressure Hose and Fittings Push-Lok Plus 801 hose provides the quick and easy assembly/ disassembly
More informationProportional Relief Valves
www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More informationSpare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 20.04.2016 www.kaercher.com EN Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0) 10 Housing 20 Pump set 21
More informationCO2 Tank Conversion Kit P.N , P.N , and P.N
Foodservice Group Multiplex Beverage Equipment Installation Instructions for CO2 Tank Conversion Kit P.N. 002247, P.N. 0022505, and P.N. 0025099 Introduction The following instructions cover the installation
More informationInstallation Instructions and User Guide 15mm & 22mm Thermostatic Mixing Valve
Installation Instructions and User Guide 15mm & 22mm Thermostatic Mixing Valve TMV3 / TMV2 Combined Valve C85079 C85081 C85080 C85082 It is important that these guidance notes are read and fully understood
More informationMeter, PD Model T-11 and T-11NF Parts List
Form No. P0565.11 Meter, PD Model T-11 and T-11NF Parts List Issue/Rev. 1.1 (9/11) Bulletin P0565.11 The Most Trusted Name In Measurement Item G Description Calibrator Version Qty. Part Number Item Description
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationOPERATING INSTRUCTIONS MANUAL FOR QACV PNEUMATIC DOSING PUMP
This operating instructions contains safety information that if ignored can endanger life or result in serious injury. They are indicated by this icon. Use of this pump with radioactive chemicals is forbidden!
More informationBLADDER CARE INSTRUCTIONS
BLADDER CARE INSTRUCTIONS BLADDER REPLACEMENT ACCUMULATOR PRECHARGING ACCUMULATOR PRECHARGE MAINTENANCE ACCUMULATOR COMMISSIONING (For 3000, 4000, 5000, 6000 and 6500-psi Accumulators) (Does not apply
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More informationRhinoPro Cartridge Gun Manual
RhinoPro Cartridge Gun Manual RhinoPro Cartridge Gun 1500 with 750ml cartridges Table of Contents Application Instructions......................................... 1 Operating Instructions..........................................
More informationMeter, PD Series H8-S1, S3, S5, S6, & S7 Parts List
Meter, PD Series H8-S1, S3, S5, S6, & S7 Parts List Issue/Rev. 0.0 (1/14) Bulletin PO01010 S1 S3, S5, S6, S7 The Most Trusted Name In Measurement Inner Mechanism Page 2 PO01010 Issue/Rev. 0.0 (1/14) Item
More informationWorld Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
More informationProduct Range. Product Range
Product Range Product Range EXCELLENT SOLUTIONS FOR COMPRESSED AIR With more than 30 years experience in pneumatic field, Aignep is an Italian leading manufacturer of compressed air elements. Aignep is
More informationOverflow valves Type OFV REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3 Features...........................................................................................
More informationSPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2145,
SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2145, 2010-09 ACCESSORIES BC2145, 2010-09 ACCESSORIES BC2145, 2010-09 Ref Part No Description Remark QTY KIT 1 502 21 60-13 ACCESSORY BAG 1 2 501 60 02-03
More informationPressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
More informationRugged Powered Bin Lifter. Operating Manual
Rugged Powered Bin Lifter Operating Manual Rugged Powered Bin Lifter Operating Manual OM0016E/2 This manual contains important safety, installation and operating instructions for this unit. Read this manual
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The (SER.22) model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The completely new
More informationAdapters and Tube Fittings Index
dapters and Tube Fittings Index lphabetical Index PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES dapters 196 Braze and
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More informationOperation Manual Advanced-Conventional Pressure Feed Spraygun
SB-E-2-531 ISS.07 Operation Manual Advanced-Conventional Pressure Feed Spraygun E P 1-12 E Operation Manual Advanced Conventional Pressure Feed Spraygun Important Read and follow all instructions and Safety
More informationThe P-Rod Double by The Airgun Lab Installation Instructions Revision F 08/01/2016 page 1 of 18
Installation Instructions Revision F 08/01/2016 page 1 of 18 Safety Warning, Terms and Conditions: Each P-Rod Double kit has been designed, manufactured, and tested to function with a standard Benjamin
More informationSimple to install connection fails. The Talbot Pushfit fitting is pressure rated PN 16.
Talbot Pushfit Talbot Pushfit - Fittings for Water Pipe Talbot Grippa Universal Service Connector The Talbot Pushfit connection is a tried and tested method of connecting low, The Talbot Grippa is a universal
More informationIndia Mark Handpump. Available Models & OperatingData: Materials of Construction: HANDPUMP. Recommended for water level setting depth (meters)
India Mark Handpump Available Models & OperatingData: Pump Model India Mark II India Mark III India Mark II Extra Deep well Afridev Head 12 to 45 m 12 to 33 m 50 to 85 m 45 m Minimum ID of bore (millimeter)
More informationSae 4 Bolt Flange Port Dimensions
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with sae 4 bolt flange port
More information1. Product Name. 2. Product Code. 3. Colour. 4. Brief Description. 5. Contents. Snoezelen Sensory Corner Kit. Cream Cushioned Platform
1. Product Name Snoezelen Sensory Corner Kit 2. Product Code 22517 3. Colour Cream Cushioned Platform 4. Brief Description Transform a corner of a room into an interactive Snoezelen Multi-Sensory Environment
More informationSuggested Installation & Operating Instructions for Sidewinder Pumps
Model 164 C P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pump Suggested Installation & Operating Instructions for Sidewinder
More informationBinks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
More informationRADIUS ROD BUSHING SET
RADIUS ROD BUSHING SET These are designed to allow your front suspension to operate much more freely than the factory units, with less maintenaance. STICKSION could be a key word here. The front end will
More information7 FORAGE AND HARVESTING
Sickle Assemblies 4560R2 Sickle section, 3" x 3-1/4" underserrated. X-Hvy gauge, Chrome finish. Uses rivet RIV101. 142669H L. FT, SECTION NUMBER 141198, TYPE UND 14260 STEEL HEAT THREADED HEADS. Section
More informationSB 52. Spare parts list. Hydraulic breakers. SB 52 s/n BES Construction Tools PC AB No j
SB 52 Spare parts list Hydraulic breakers SB 52 s/n BES043707 2018 Construction Tools PC AB No. 9800069301j 2018-01 General information This spare parts list applies to the following: Part number 8460030010
More informationPressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
More informationSerie ECO 3F. Flanged back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection
Flanged back flow preventer with controllable reduced pressure zone made in Application fields WATER FIRE FIGHTING DRINKING WATER 64 www.brandoni.it The ECO 3F flanged backflow preventers, which have a
More informationPressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
More informationPropor tional Re lief Valve s
www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves
More information