High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "High Pressure Equipment Medium Pressure Valves, Fittings and Tubing"

Transcription

1 igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle valves, fittings, line filters, check valves, safety heads, rupture discs, anti-vibration gland assemblies, tubing and nipples are engineered to the highest standards of repeatable quality. The reliable performance of these products has made ip one of the world s leading suppliers of elevated pressure components. Medium Pressure components use a compact coned-and-threaded connection which permits the larger bore sizes and increased flow rates common in this pressure class. Medium Pressure valves are available in,, /6,, and O.D. tubing sizes and five patterns to satisfy widely varied requirements. line of fittings is available to facilitate adapting to Taper Seal, igh Pressure or other threaded pipe systems. Index Page Valves* ittings Unions, ulkheads & Caps Line ilters & Check Valves Safety eads & Rupture Discs..... nti-vibration land ssemblies....8 Tubing Coned & Threaded Nipples Connection Details ppendix *Note: 0,000 psi large orifice is offered in and size. R4 2/02.

2 igh Pressure quipment L4 ( ) and L6 ( ) Medium Pressure Valves Medium Pressure (coned & threaded) type connections for,, /6,, and O.D. tubing. Non-rotating tip stems are standard for on-off service and insure long life on valve seats. Regulating tip stems are available for all valves at no additional cost, add - R to part number. lands and collars for tubing are supplied with each valve unless otherwise requested (glands and collars shown on pages.4 and.). Materials include high tensile type 6 stainless steel bodies and hardened -4P stainless steel lower section stems. Packing is Teflon (40 ) standard with optional Viton (0 ), UN-N (200 ) and rafoil (800 ) available at no additional cost. ir operators for remote control operation are available for all valves. (Select required valve and add IPCO. Refer to section.0 for additional data). igh temperatures can be accommodated by using extended stuffing boxes (see page 6.4). L ( /6) Valve eatures Non-rotating stem tips Packing below stem threads Type 6 ss high tensile bodies Positive gland lock device No stem adjustment needed lack T-handles or choice of 4 colors Tube sizes through L2 ( ) and L6 ()* *Note: 0,000 psi large orifice is offered in and size..2 R 8/04

3 Medium Pressure Valves Two Way Straight Valves D L K Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-L4 20,000 L4 4 2 /6 2 /2 O.D. 20-L6 20,000 L6 / /6 2 /2 /6 O.D. 20-L 20,000 L /6 6 2 /2 /2 2 /2 /2 O.D. 20-L2 20,000 L2 /6 /2 /6 O.D. 0-L2 0,000 L2 /64 /2 /6 O.D. 20-L6 20,000 L6 /6 8 2 /64 4 /6 4 2 /2 /6 O.D. 0-L6 0,000 L6 /6 8 2 /64 4 /6 4 2 /2 /6 Two Way ngle Valves D L K Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-2L4 20,000 L4 4 /6 2 _ 2 /6 /2 O.D. 20-2L6 20,000 L6 4 /6 2 _ /64 2 /6 /2 /6 O.D. 6 2 _ /2 20-2L 20,000 L /6 /2 /2 O.D. 20-2L2 20,000 L2 /2 _ /6 2 4 /6 O.D. 0-2L2 0,000 L2 /2 _ / /6 O.D. 20-2L6 20,000 L6 4 _ /6 2 /6 /6 2 /2 /6 O.D. 0-2L6 0,000 L6 4 _ /6 2 /6 /6 2 /2 /6 Three Way Valves / Two Pressure Connections D L D L L D K D L K K K Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-L4 20,000 L4 2 /6 2 /2 O.D. 20-L6 20,000 L6 /64 2 /6 2 /2 /6 O.D. 20-L 20,000 L /6 6 2 /2 /2 /2 O.D. 20-L2 20,000 L2 / /6 O.D. 0-L2 0,000 L2 / /6 O.D. 20-L6 20,000 L6 /6 4 2 /6 2 /2 /6 O.D. 0-L6 0,000 L6 /6 4 2 /6 2 /2 /6 Three Way Valves / One Pressure Connection Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-4L4 20,000 L4 4 /6 2 2 /6 /2 O.D. 20-4L6 20,000 L6 /64 4 /6 2 2 /6 /2 /6 O.D. 20-4L 20,000 L /6 6 2 /2 /2 /2 O.D. 20-4L2 20,000 L2 /6 / /6 O.D. 0-4L2 0,000 L2 /64 / /6 O.D. 20-4L6 20,000 L6 / /6 2 /2 /6 O.D. 0-4L6 0,000 L6 / /6 2 /2 /6 Three Way / Two Stem Connection Valves Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-L4 20,000 L4 2 /6 /6 /2 O.D. 20-L6 20,000 L6 /64 2 /6 /6 /2 /6 O.D. 20-L 20,000 L /6 8 2 /2 2 /6 /2 /2 O.D. 20-L2 20,000 L2 /6 2 6 /2 /6 O.D. 0-L2 0,000 L2 / /2 /6 O.D. 20-L6 20,000 L6 /6 2 / /6 8 2 /2 /6 O.D. 0-L6 0,000 L6 /6 2 / /6 8 2 /2 /6 Replaceable Seat Valves Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-2L4-R 20,000 L4 2 _ 2 /6 /2 O.D. 20-2L6-R 20,000 L6 2 _ /64 2 /6 /2 /6 O.D. 8 2 _ /2 20-2L-R 20,000 L /6 /2 /2 O.D. 20-2L2-R 20,000 L2 8 _ /6 2 4 /6 O.D. 0-2L2-R 0,000 L2 8 _ / /6 O.D. 20-2L6-R 20,000 L6 /6 /6 4 _ /6 2 /6 /6 2 /2 /6 O.D. 0-2L6-R 0,000 L6 /6 /6 4 _ 2 /6 /6 2 /2 /6 igh Pressure quipment Company R 2/00 P.O. ox Linden ve. rie, P 60 U.S.. Phone: (84) ax: (84) Mail:

4 igh Pressure quipment lands/collars/plugs lbows/tees/crosses complete range of elbows, tees, and crosses is available for all of the tubing connection sizes. Material is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Connection Components Tube Catalog No. Size land 20-2LM4 20-2LM6 Tube Catalog No. Size Collar 20-2L4 20-2L6 Tube Catalog No. Size Plug 20-LM4 20-LM6 20-2LM /6 20-2LM2 20-2LM6 20-2L /6 20-2L2 20-2L6 20-LM /6 20-LM2 20-LM6 Medium Pressure lbows Pressure Rating Catalog No. psi Connections - Thickness 20-22L4 20,000 O.D. TU L4 /6 / L6 20,000 O.D. TU L L 20,000 /6 O.D. TU L 20-22L2 20,000 O.D. TU L2 2 2 /2 / L6 20,000 O.D. TU L6 2 /6 2 /6 C Medium Pressure Tees Pressure Rating Catalog No. psi Connections --C Thickness 20-2L4 20,000 O.D. TU L4 /6 20-2L6 20,000 O.D. TU L L 20,000 /6 O.D. TU L 2 /2 20-2L2 20,000 O.D. TU L2 2 /2 /2 20-2L6 20,000 O.D. TU L6 4 2 /6 2 /6 C D Medium Pressure Crosses Pressure Rating Catalog No. psi Connections --C-D Thickness 20-24L4 20,000 O.D. TU L4 / L6 20,000 O.D TU L L 20,000 /6 O.D. TU L 2 /2 2 / L2 20,000 O.D. TU L2 /2 / L6 20,000 O.D. TU L /6 2 /6.4 R2 2/

5 Union Couplings (Slip Type) Union (slip type) couplings are ideal for use in confined space installations. This design allows the entire coupling to be disconnected and slipped back over the tubing to facilitate assembly and disassembly. In installations where tubing is easily assembled, it is preferable (and less expensive) to use standard straight couplings (see section 8.0). Standard material is high tensile 6 stainless steel. Standard tubing collars and glands are provided unless otherwise specified. ulkhead Couplings ulkhead couplings are designed specifically for passing a tubing connection through a panel or steel barricade. These couplings include a locknut as shown. Material is high tensile 6 stainless steel. Standard tubing collars and glands are included unless otherwise specified. Catalog No. Tubing psi Orifice Length ex 20-2L4-U O.D. 20,000 L4 L4 /6 20-2L6-U O.D. 20,000 L6 L6 /2 20-2L-U /6 O.D. 20,000 L L 2 / L2-U O.D. 20,000 L2 L2 /64 2 /2 20-2L6-U O.D. 20,000 L6 L6 /6 /2 Catalog No. Tubing psi Connections Orifice Length ex ole Diameter 20-2L4- O.D. 20,000 L L6- O.D. 20,000 L6 / L- /6 O.D. 20,000 L 2 /64 2 / L2- O.D. 20,000 L2 / L6- O.D. 20,000 L-6 /6 /2 2-2 Locknut Caps Tubing end caps are offered for use in sealing off tubing ends either for temporary use or permanent use such as on small volume reservoirs. Standard material is high tensile 6 stainless steel. Standard tubing collars and glands are provided unless otherwise specified. Catalog No. Tubing psi Length ex 20-2L4-C O.D. 20,000 L4 20-2L6-C O.D. 20,000 L6 20-2L-C /6 O.D. 20,000 L /2 20-2L2-C O.D. 20,000 L2 2 /2 20-2L6-C O.D. 20,000 L6 igh Pressure quipment Company R 2/ P.O. ox Linden ve. rie, P 60 U.S.. Phone: (84) ax: (84) Mail:

6 igh Pressure quipment Line ilters The line filters as shown utilize sintered stainless steel filter discs pc./set. Porosities are available as per the chart to the right. If not otherwise specified, 00 micron filter discs are supplied. (One micron = 0.00 millimeters). Material of body, caps and cover is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. LOW Micron Size ilter vailable Catalog No. Tubing psi Connections Orifice Length Thickness L4 O.D. 20,000 L4 20-L6 O.D. 20,000 L6 /2 20-L /6 O.D. 20,000 L 2 /64 all Check Valves all type check valves insure flow in one direction only. Material for body, caps and cover is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Note: 20-4L6 material -4P Soft Seat Check Valves Soft seat check valves insure flow in one direction only and can be mounted in any position. These are highly reliable for both gas and liquid service. Standard O-ring (soft seat) material for the sealing surface is una-n (nitrile) with other materials including Teflon and Viton available on request. Temperature is limited by the choice of O-ring material. Material of all other parts is high tensile 6 stainless steel. Standard glands and collars are provided unless otherwise specified. Note: 20-4L6 material -4P LOW Catalog No. Tubing psi Connections Orifice Length Thickness 20-4L4 O.D. 20,000 L4 20-4L6 O.D. 20,000 L6 /2 20-4L /6 O.D. 20,000 L 2 /64 4 /2 20-4L2 O.D. 20,000 L2 /6 20-4L6 O.D. 20,000 L6 /6 6 /2 2 /2 LOW Catalog No. Tubing psi Connections Orifice Length Thickness 20-4L4-T O.D. 20,000 L4 20-4L6-T O.D. 20,000 L6 /2 20-4L-T /6 O.D. 20,000 L 2 /64 4 /2 20-4L2-T O.D. 20,000 L2 /6 20-4L6-T O.D. 20,000 L6 /6 6 /2 2 /2.6 R2 2/

7 Safety eads The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels. Outlet connections are pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 0 foot pounds, depending upon pressure and media being used. Material of body and hold down nut is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Note: Rupture discs are not included and must be ordered as a separate item. Catalog No. Tubing psi Connections Orifice Length ex 20-6LM4 O.D. 20,000 LM LM6 O.D. 20,000 LM LM /6 O.D. 20,000 LM LM2 O.D. 20,000 LM LM6 O.D. 20,000 LM /2 Rupture Discs /4 ngled Seat /4 effective area SPCIL DISCS are available on special order for pressure ranges not shown above and in numerous materials and coatings. Consult factory for price and delivery. Standard rupture discs are available from stock in burst pressures as listed in the chart below. ll pressures through are shaded. These discs are 6 stainless steel (except for,000 psi which are inconel) and may be used with any of the safety heads shown. Note that these rupture discs are supplied with a tolerance of plus 6% and minus % of specified burst pressure. Samples of each batch are tested and the actual average burst pressure is stamped on an accompanying metal tag. actors influencing rupture disc life include corrosion, metal fatigue, and cyclic effects. Periodic replacement is recommended to prevent premature failure. Standard urst Pressures (in psi at 2 ),000,00 2,000 2,00,000,00 4,000 4,00,000,00 6,000 6,00,000,00 8,000 8,00,000,00 0,000 0,00,000,00 2,00,000,00 8,000 20,000 22,00 2,000 2,000 0,000,000,00 40,000 4,000 0,000,000 60,000 6,000 igh Pressure quipment Company R /0 P.O. ox Linden ve. rie, P 60 U.S.. Phone: (84) ax: (84) Mail:

8 igh Pressure quipment nti-vibration land ssemblies Tubing systems that are subject to extreme vibration or shock, such as mobile pressure systems or long tubing runs culminating at a compressor, will benefit from the use of igh Pressure quipment Company's nti-vibration land ssemblies. These assemblies utilize the same reliable connection geometries as the standard ip fittings, with the added benefit of essentially unlimited vibrational fatigue life. coned and threaded tube, when subjected to unusual or excessive vibration, may fail prematurely and break at the last thread. The nti-vibration land ssembly acts to move the fulcrum of vibration away from the threaded portion of the tube and onto the strong, solid wall of the tubing. wedge-like collet firmly holds the assembly in place, virtually eliminating premature tubing failure while reliably maintaining a leak-free connection between the tube and the connection seat. Medium Pressure nti-vibration land ssemblies Pressure Rating Catalog No. psi Connections C 20-LM4 20,000 MDIUM PRSSUR /2 /6 20-LM6 20,000 MDIUM PRSSUR 20-LM 20,000 /6 MDIUM PRSSUR 20-LM2 20,000 MDIUM PRSSUR 2 20-LM6 20,000 MDIUM PRSSUR /2 2 /2 C nti-vibration Components Tubing Slotted Collet Collet Size Collet land ody Collar / L4 / 8 / 6 / L L L L6.8

9 Medium Pressure Tubing Tubing is cold drawn, seamless, and is supplied in the /8 hard condition (not annealed). Tensile strength is approximately 40 percent higher than that of annealed tubing. ll tubing is manufactured in strict accordance with igh Pressure quipment Company specifications to insure tolerances and bore quality. Tubing is stocked in lengths of 8 to 22 feet but may be ordered in shorter lengths with no additional cutting charge. / 4 / 8 Working Pressure Type of Catalog Tubing Size psi Connection Used Material Order Number O.D. x 0.0 I.D. 20,000 MDIUM PRSSUR (L4) 6 SS 20-M4-6 O.D. x 0.20 I.D. 20,000 MDIUM PRSSUR (L6) 6 SS 20-M6-6 / 6 / 4 /6 O.D. x 0. I.D. 0,000 6 SS 0-M-6 /6 MDIUM PRSSUR (L) /6 O.D. x 0.2 I.D. 20, SS 20-M-04 6 SS 20-M-6 O.D. x 0.6 I.D. 0,000 0-M2-6 MDIUM PRSSUR (L2) 6 SS O.D. x 0.48 I.D. 20, M2-6 O.D. x I.D. 0,000 0-M6-6 MDIUM PRSSUR (L6) 6 SS O.D. x 0.62 I.D. 20, M6-6 Nipples Nipples are stocked in 6 stainless steel. Nipples in lengths other than those shown are supplied upon request. Nipples are not furnished with collars and glands, unless specified at time of order. Length Coned and Threaded Nipples Tubing Size (O.D. x I.D.) O.D. x /64 I.D. O.D. x /64 I.D. /6 O.D. x /6 I.D. O.D. x /64 I.D. O.D. x /6 I.D. O.D. x /6 I.D. O.D. x /6 I.D. psi LM LM LM LM LM LM6-20-LM LM LM LM LM-4 20-LM-6 20-LM-8 20-LM-0 20-LM-2 0,000 psi 0-LM2-4 0-LM2-6 0-LM2-8 0-LM2-0 0-LM LM LM LM LM2-2 0,000 psi 0-LM6-6 0-LM6-8 0-LM6-0 0-LM LM LM LM LM6-2 igh Pressure quipment Company R4 2/02 P.O. ox Linden ve. rie, P 60 U.S.. Phone: (84) ax: (84) Mail:

10 igh Pressure quipment Medium Pressure Connections (Coned and Threaded) service The Medium Pressure tubing connection is available for,, /6, and O.D. tubing. The tubing may be prepared with the use of tooling (see tooling section.0) or prepared at the factory to specified lengths. dditionally, standard length coned and threaded nipples are available from stock (see page.). This connection has become an industry standard for use at elevated pressures and temperatures in both liquid and gas applications. It may be disassembled and retightened indefinitely. The threads of the gland are right-hand while the threads of the collar and tubing are left-hand to prevent rotation of the collar during assembly. L4 /4 O.D. Tubing emale Opening Detail / /2 L6 /8 O.D. Tubing 60 /6-8 /8 L /6 O.D. Tubing / /4 L2 /4 O.D. Tubing /4-4 NPSM 60 /6 L6 O.D. Tubing - /8-2 T'D 60 - /6 Materials. ll of the components required for make-up of a Medium Pressure connection (glands, collars and plugs) are produced in Type 6 stainless steel. lands and collars are provided with all valves and fittings (except nipples) unless otherwise requested. (See chart on the right for size details and catalog numbers). L4 L6 L L2 L6 land /6 / / NPSM LM4 20-2LM6 20-2LM 20-2LM2 20-2LM6 - Collar -24 L.. /6-8 L.. -6 L.. -4 L L.. Plug /2 /2 /6 /6 20-2L4 20-2L6 20-2L 20-2L2 20-2L6 /2 /2 /6 /6-2 /64 2/2 /6 /2 -/6 /6 -/6 /8 - X /6 / /8 - X /6 - /2 /2 -/6 2- Tubing land Collar 20-LM4 20-LM6 20-LM 20-LM2 20-LM6 Tube nd Prep /2 /64 /2 2/2 /6 /4 /2 /2 /8-28 L.. /8-24 L.. /6-8 L.. /4 LM4 LM6 LM LM2-6 L.. LM6 /6 /6 2/2 2/2 /6 2/2-4 L... ppendix R2 2/

High Pressure Equipment 2 - Medium Pressure Valves, Fittings and Tubing 20,000 psi service

High Pressure Equipment 2 - Medium Pressure Valves, Fittings and Tubing 20,000 psi service Solutions de régulation des fluides High Pressure Equipment 2 - Medium Pressure Valves, Fittings and Tubing 20,000 psi service Petrometalic SA 2, rue de l Ermitage 78000 VERSAILLES www.petrometalic.com

More information

HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT

HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Ultra Valve cross sections Handle Gland with packing of copper aluminium alloy for smooth running Body Non- stem of 17-4 PH prevents scoring

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

Sample C ylinde rs, Acce ssorie s, and O utage Tube s

Sample C ylinde rs, Acce ssorie s, and O utage Tube s www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample

More information

High Pressure Equipment Pressure Vessels and Reactors

High Pressure Equipment Pressure Vessels and Reactors Vessels and Reacrs Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications.we have over 0 standard reacr designs which address varied

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

INSERT FITTINGS INSERT FITTINGS

INSERT FITTINGS INSERT FITTINGS Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4

More information

Medium Pressure Products MPI Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range. Catalog 4234 Revised, September 2003

Medium Pressure Products MPI Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range. Catalog 4234 Revised, September 2003 Medium Pressure Products Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range Catalog 4234 Revised, September 2003 Fittings Medium Pressure Fittings Introduction Parker Hannifin Fittings* have

More information

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Installation, Operation and Maintenance Manual for Back Pressure Regulator Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications

More information

Full Range Pressure Compensating Variable Flow Control

Full Range Pressure Compensating Variable Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12 PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN

More information

Pressure Dump Valve Service Kit for Series 2300 Units

Pressure Dump Valve Service Kit for Series 2300 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

INTERLOCKED METAL HOSE

INTERLOCKED METAL HOSE INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked

More information

RegO Adapters, Connector, & Fittings

RegO Adapters, Connector, & Fittings RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of

More information

Buying more than 11 gauges? Call Lesman for additional discounts.

Buying more than 11 gauges? Call Lesman for additional discounts. Low Cost Liquid Filled Pressure Gauges Size: 1.5", 2", and 2.5" Accuracy: 2.5% of full scale Materials: Case and ring: 304 stainless steel; Window: Polycarbonate; Seals: Buna-N; Pointer: Black-finished

More information

Halsey Taylor Owners Manual 4410 Freeze Resistant Tubular Fountain STOP!

Halsey Taylor Owners Manual 4410 Freeze Resistant Tubular Fountain STOP! Halsey Taylor Owners Manual 4410 Freeze Resistant Tubular Fountain STOP! PLEASE READ THE FOLLOWING INFORMATION. ITALLATION ITRUCTIO FOR THE 4410FR FTN. WITH 97243C SINGLE VALVE CONTROL ASSEMBLY ARE LOCATED

More information

REFRIGERATION SYSTEM COMPONENTS

REFRIGERATION SYSTEM COMPONENTS REFRIGERATION SYSTEM COMPONENTS henrytech.com Conventional Oil Separators The function of an Oil Separator is to remove oil from the discharge gas and return it to the Compressor either directly or through

More information

IFP C175-* REMOTE CONTROL RELIEF VALVE

IFP C175-* REMOTE CONTROL RELIEF VALVE IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)

More information

Continental Industries STEEL SERVICE TEES or FAX Visit

Continental Industries STEEL SERVICE TEES or FAX Visit Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

Crosby style JCE Safety Valve Installation, Maintenance and Adjustment Instructions CROSBY

Crosby style JCE Safety Valve Installation, Maintenance and Adjustment Instructions CROSBY CROSBY Table of contents 1. Installation 1 1.1. Drainage 1 1.2. Discharge pipework 1 1.3. Preparation for installation 1 2. Pressure adjustment 1 3. Maintenance 1 4. Dismantling 1 4.1. All valve types

More information

TEST SPECIFICATION NYT-909-C

TEST SPECIFICATION NYT-909-C 748 Starbuck Ave, Watertown, NY 13601 Phone: +1-315-786-5200 Engineering Fax: +1-315-786-5673 TEST SPECIFICATION NYT-909-C CODE OF TESTS FOR TESTING "AB" TEST RACK P/N 702546 & 702612 ISSUE NO. 5 1.0 THE

More information

RG1200 Service and Repair Manual

RG1200 Service and Repair Manual Dive Rite RG 1200 Regulator Service and Repair Manual Page 1 Text and Photography by Pete Nawrocky Copyright ( ) 1999-2000, Lamartek, Inc., dba Dive Rite RG1200 Service and Repair Manual First Stage.........................................

More information

Pressure Regulators. Aperflux 851

Pressure Regulators. Aperflux 851 Pressure Regulators Aperflux 851 80 1 2 3 4 5 6 7 Aperflux 851 > Pressure regulators Introduction Aperflux 851 is a boot style pilot-controlled pressure regulator for medium and high pressure applications.

More information

TECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1

TECHNICAL DATA MAINTENANCE AIR COMPRESSOR MODEL G-1 Dry 131h 1. DESCRIPTION The Viking Model G-1 Maintenance Air Compressor is an electric motor-driven, aircooled, single-stage, oil-less compressor. The unit is equipped with a check valve and provides a

More information

REGULATORS FOR SPECIFIC APPLICATIONS

REGULATORS FOR SPECIFIC APPLICATIONS SINGLE-STAGE REGULATORS FOR NITROUS OXIDE AND CARBON DIOXIDE (MODELS SG9011, SG9012, SG9014) Nitrous Oxide and Carbon Dioxide frequently cause ordinary regulators to freeze up. Models SG9011, SG9012 and

More information

Types 95L and 95H Pressure Regulators

Types 95L and 95H Pressure Regulators Instruction Manual Form 1151 Types 95L and 95H July 1990 Types 95L and 95H Pressure Regulators W1888 W1888 W5652 Figure 1. NPT Body (Left), NPT Body (Middle), and Flanged Body (Right) Pressure Regulators

More information

Installation Instructions

Installation Instructions Installation Instructions S65-135 (Circular) S65-136 (Semi-Circular) Air Valve Retrofit For Non-Sectional Classic Washfountain Table of Contents.......................2-6 Metering Air Valve Parts List....................6

More information

ACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series

ACME Connectors and Fittings Extended Type Hose Couplings for Vapor and Liquid Service A7571 and A7575 Series M onnectors and Fittings xtended Type Hose ouplings for Vapor and Liquid Service 7571 and 7575 Series esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited

More information

Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options

Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2 ISO G and ISO R Thread Options Section 2 Pneufit Metric Series Push-In Tube Fittings 4 mm to 14 mm Tube Sizes M5 to 1/2" ISO G and ISO R Thread Options Metric Series Product Numbering System...............FIT-2-2 Metric Series Shapes

More information

CYL KNIFE GATE VALVES San Sebastian Spain

CYL KNIFE GATE VALVES San Sebastian Spain CYL KNIFE GATE VALVES San Sebastian Spain INSTALATION, OPERATION & MAINTENANCE INSTRUCTIONS (XD HIGH PRESSURE) INTRODUCTION The CYL knife gate valve is a unique, patented, low cost, bi-directional on-off

More information

Gas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A.

Gas Lines. Technical Manual. Sumitomo (SHI) Cryogenics of America, Inc Vultee Street Allentown, PA U.S.A. Gas Lines Technical Manual Sumitomo (SHI) Cryogenics of America, Inc. 1833 Vultee Street Allentown, PA 18103-4783 U.S.A. Revision F: April 2008 261320A TABLE OF CONTENTS Page DESCRIPTION...1 SPECIFICATIONS...2

More information

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D. 90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds

More information

Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable

Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable GEP-6075 Rev. B 101574 Ref. I.D.: 16973 Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE

More information

Operation Manual Piston Sensed Gas Pressure Regulators

Operation Manual Piston Sensed Gas Pressure Regulators 687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Operation Manual Piston Sensed Gas Pressure Regulators (Models KT9, KT10, Welded KT10, KT12) Table of Contents:

More information

PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT

PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT PILOT OPERATED RELIEF VALVE SAFETY PRODUCTS THAT PROTECT EQUIPMENT, LIVES & THE ENVIRONMENT Model Number Model Description Page # Pilot operated Relief Valves Pilot Operated Relief Valves 3-27 Operation

More information

PRS(TC)4,8 USER MANUAL. Read the complete manual before installing and using the regulator.

PRS(TC)4,8 USER MANUAL. Read the complete manual before installing and using the regulator. PRS(TC)4,8 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to

More information

TECHNICAL DATA ACCELERATOR MODEL E-1

TECHNICAL DATA ACCELERATOR MODEL E-1 Page 1 of 10 1. PRODUCT DESCRIPTION The Viking Model E-1 Accelerator is a quick-opening device. When installed with the required external Anti-flood Device, the assembly is designed to increase the operating

More information

COMBINATION AIR RELEASE DEGASSING (CARD) VALVES INSTALLATION AND MAINTENANCE MANUAL

COMBINATION AIR RELEASE DEGASSING (CARD) VALVES INSTALLATION AND MAINTENANCE MANUAL COMBINATION AIR RELEASE DEGASSING (CARD) VALVES INSTALLATION AND MAINTENANCE MANUAL SPECIFICATIONS: The CARD series air valves are available in 3 pipe sizes, 1, 2 and 4 NPT or socket. Maximum inlet pressure

More information

GIRARD EQUIPMENT, INC. Specialty Valve Manufacturers for Tank Trailers since 1952

GIRARD EQUIPMENT, INC. Specialty Valve Manufacturers for Tank Trailers since 1952 Pressure Testing Girard DOT407 Pressure Relief Vents GIRARD EQUIPMENT, INC. Specialty Valve Manufacturers for Tank Trailers since 1952 908-862-6300 Toll Free 800-526-4330 FAX 908-862-8178 Website: www.girardequip.com

More information

SWIRLFLO Refrigerated fountains with FLEXI-GUARD

SWIRLFLO Refrigerated fountains with FLEXI-GUARD TM INSTALLATION, CARE & USE MANUAL SWIRLFLO Refrigerated fountains with FLEXI-GUARD TM INSTALLER! CAUTION: Review these instructions before beginning installation. Be sure that installation conforms to

More information

Float Operated Level Controllers

Float Operated Level Controllers CONTENTS Float Operated Level Controllers IM0015 Nov. 2014 PAGE Introduction 1 Scope 1 Description 1 Specification 1 Control Installation 2 INTRODUCTION Side Mount Back Mount Prior to installing, the instructions

More information

SABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company

SABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN

More information

Adapters and Tube Fittings Index

Adapters and Tube Fittings Index dapters and Tube Fittings Index lphabetical Index PRESSURE HOSE HIGH PRESSURE HOSE HOSE FITTINGS TUBE FITTINGS DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES DESCRIPTION PGES dapters 196 Braze and

More information

Products Compliant with the Transportable Pressure Equipment Directive (TPED)

Products Compliant with the Transportable Pressure Equipment Directive (TPED) Swagelok Products Compliant with the Transportable Pressure Equipment Directive () 1 www.swagelok.com Swagelok Products Compliant with the Transportable Pressure Equipment Directive () Products Double-ended

More information

Gas Boosters & Systems

Gas Boosters & Systems DRIVEN Gas Boosters & Systems SINGLE ACTING - SINGLE STAGE PRESSURES UP TO 10,875 psi DOUBLE ACTING- SINGLE STAGE PRESSURES UP TO 21,750 psi TWO STAGE PRESSURES UP TO 21,750 psi DOUBLE HEAD - SINGLE AND

More information

Anderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions

Anderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent

More information

Pressure Sensing Valve - Model 4023

Pressure Sensing Valve - Model 4023 Pressure Sensing Valve - Model 4023 Overview AMOT Model 4023 can be used as a 2 or 3-way capacity, pressure sensing valve. This valve is ideal for applications that require compressor suction and discharge

More information

Vertical Bladder Tanks

Vertical Bladder Tanks DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65

Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65 Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode

More information

CFC2. Float Control For Closed Tanks MODEL. Specifications. Dimensions (In Inches) Reservoir Connection 1" NPT (Typ. Both Ends 2 Places)

CFC2. Float Control For Closed Tanks MODEL. Specifications. Dimensions (In Inches) Reservoir Connection 1 NPT (Typ. Both Ends 2 Places) MODEL Float Control For Closed Tanks Accurate Liquid Level Control Fully Hydraulic Operation Simple Design, Easy Maintenance No Lubrication Necessary No Gears, No Mechanical Linkage Between Valve and Control

More information

Pressure regulator for water

Pressure regulator for water Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water

More information

Instructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.

Instructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position. 027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782

More information

3.0 Pressure Transmitter Selection

3.0 Pressure Transmitter Selection 3.0 Pressure Transmitter Selection Each Tronic Line pressure transmitter has different features to meet specific performance, environmental, and price requirements. It is not possible to describe every

More information

BULLETIN FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES.

BULLETIN FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES. BULLETIN 20-7000 ROTAMETERS PURGE FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES. INTRODUCTION McCrometer purge rotameters are precision-made instruments designed to accurately

More information

Service and installation must be performed by a trained/experienced service technician.

Service and installation must be performed by a trained/experienced service technician. CATALOG DRAFT 09.18.2013 Service and installation must be performed by a trained/experienced service technician. All products used with combustible gas must be installed and used strictly in accordance

More information

Chlorinator. MODEL C-731 (Floor Mounted)

Chlorinator. MODEL C-731 (Floor Mounted) Chlorinator MODEL C-731 (Floor Mounted) CHLOROTECH Model C-731 is the advance technology Chlorinator designed to feed chlorine gas at a controlled rate. The flow rate of gas is maintained by constant positive

More information

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.

Discontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves. Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing

More information

Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders

Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders Installation Instructions For Flat Seated Bolted Type RAH Series Disk Holders RA Series Rupture Disks 1. WARNING a) Read the complete instructions before attempting to install the rupture disk and holder

More information

MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.

MUELLER A A Non-Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3. Installation Instructions manual MUELLER table of contents PAGE A-20808 General Information 2 Technical Data 3 Dimensions 4 A-20809 Non-Adjustable Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator

More information

LESER at a glance. The-Safety-Valve.com

LESER at a glance. The-Safety-Valve.com LESER at a glance The-Safety-Valve.com Safety Valves API Series 526 Applications Refineries Chemical industry Petrochemical industry Oil and gas Onshore and Offshore Product features Valve sizes 1" through

More information

Horizontal Bladder Tanks

Horizontal Bladder Tanks DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3.

MUELLER. A A Adjustable. Vertical Indicator Posts. Reliable Connections. General Information 2. Technical Data 3. Installation Instructions manual MUELLER table of contents PAGE A-20806 A-20807 Adjustable General Information 2 Technical Data 3 Dimensions 4 Installation 5-6 Parts 7 Maintenance 8 Vertical Indicator

More information

VCO O-Ring Face Seal Fittings

VCO O-Ring Face Seal Fittings O-Ring Face Seal Fittings www.swagelok.com O-Ring Face Seal Fittings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 Weld, VR,, Pipe, and Vacuum Fittings ontents Technical

More information

Industrial Compression Style Fittings

Industrial Compression Style Fittings Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial

More information

Model MTB-ASME Vertical Bladder Tanks

Model MTB-ASME Vertical Bladder Tanks DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)

More information

Installation, Operation, and Maintenance Manual. Welker Constant Pressure Cylinder With Welker Magnetic Indicator (With Gravity Mixer) Model CP2GM-HP

Installation, Operation, and Maintenance Manual. Welker Constant Pressure Cylinder With Welker Magnetic Indicator (With Gravity Mixer) Model CP2GM-HP Installation, Operation, and Maintenance Manual Welker Constant Pressure Cylinder With Welker Magnetic Indicator (With Gravity Mixer) Model The information in this manual has been carefully checked for

More information

Standard Grout Header. Protected Pressure Gauge. High Pressure Gauge. In-Line Grout Header. Inline Protected Pressure Gauge

Standard Grout Header. Protected Pressure Gauge. High Pressure Gauge. In-Line Grout Header. Inline Protected Pressure Gauge G A U G E S G R O U T H E A D E R S Protected Pressure Gauge In-line mounting accurately measures grout discharge pressure. Gauge is equipped with quick disconnect fittings that easily snaps into grout

More information

Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat 7I Insert, Full Bolted, and Union Type Holders

Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat 7I Insert, Full Bolted, and Union Type Holders GEP-6002 Rev. AA 102335 Ref. I.D.: 5993 Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat 7I Insert, Full Bolted, and Union Type Holders WARNING USER

More information

IBS, INCORPORATED Index Washers W A S H E R S. Washers, Lock Alloy C-8 External Tooth C-10. Internal Tooth C-10

IBS, INCORPORATED Index Washers W A S H E R S. Washers, Lock Alloy C-8 External Tooth C-10. Internal Tooth C-10 IB, INCOPOTD Index ashers ssortments Flat asher Copper C-11 Fender asher C-9 eavy Duty C-5 Lock asher Internal & xternal tar asher C-10 ur-lock Vibration-esistant ashers C-7 Back-Up ashers luminum ound

More information

INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN

INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN INSTALLATION INSTRUCTIONS FOR GRT75-PF-RFS PET FOUNTAIN Important: Read all instructions and refer to local codes prior to installation. l Local soil conditions may require more gravel for drainage. l

More information

M7XT Parts List PARTS LIST. TAL 1504 (L) Rev. 2 MSA 2015 Prnt. Spec (I) Mat Doc

M7XT Parts List PARTS LIST. TAL 1504 (L) Rev. 2 MSA 2015 Prnt. Spec (I) Mat Doc M7XT Parts List PARTS LIST TAL 1504 (L) Rev. 2 MSA 2015 Prnt. Spec. 10000005389(I) Mat. 10146000 Doc. 10146000 M7XT PARTS LIST FireHawk M7XT Carrier and Harness Assembly Replacement Kits...3 Exploded View...4

More information

MODELS 1500, 1520, 1530, 1560

MODELS 1500, 1520, 1530, 1560 Installation, Operation and Maintenance MODELS 1500, 1520, 1530, 1560 IOM1500.0 October, 2002 TABLE OF CONTENTS DESCRIPTION Introduction Pilot Valve Design and Function Safety Warnings Shipping, Inspection

More information

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"

Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3, 4, 6 Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with

More information

POP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS

POP Safety Valve. POP Safety Valve INTRODUCTION DEFINITIONS POP Safety Valve POP Safety Valve INTRODUCTION The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant and personnel. Safety

More information

VOLUMATIC WATER REGULATOR

VOLUMATIC WATER REGULATOR VOLUMATIC WATER REGULATOR For Cage Systems - PDS and Manual Adjustment Part Number 00-, 00-, 00- Introduction The Chore-Time VOLUMATIC Water Regulator is designed to regulate the water pressure for the

More information

SIHI LPH-X - Liquid Ring Compressors

SIHI LPH-X - Liquid Ring Compressors - Liquid Ring Compressors LPH 50523 LPH 60527 Pressure range: Suction volume range: 0.2 to 1.5 bar 260 to 780 m³/h CONSTRUCTION Sterling SIHI liquid ring compressors are displacement compressors with a

More information

DuraSite 500(1) Portable Sample Vessel User's Guide. Version (1) = 90 Duro Wetted O-Rings

DuraSite 500(1) Portable Sample Vessel User's Guide. Version (1) = 90 Duro Wetted O-Rings DuraSite 500(1) Portable Sample Vessel User's Guide Version 11142003 (1) = 90 Duro Wetted O-Rings 2 Table Of Contents 1. Introduction 3 2. About this Manual 3 3. Contacting YZ Systems 3 4. Vessel Components

More information

INSTRUCTION MANUAL Kobelco Eagle Marine Water Lubricated Stern Tube Seals

INSTRUCTION MANUAL Kobelco Eagle Marine Water Lubricated Stern Tube Seals INSTRUCTION MANUAL Kobelco Eagle Marine Water Lubricated Stern Tube Seals A. Description of Seal Assembly B. Installation C. Piping D. Testing for undocking E. Installation check seat F. Operation G. Sealing

More information

Anti-flood device Model B-1

Anti-flood device Model B-1 December 4, 2009 Dry Systems 123a 1. DESCRIPTION The Anti-flood Device is required when Viking accelerators are installed on dry systems according to Viking Model E-1 Accelerator Trim Charts. In the SET

More information

Model VR6 System. Installation, Operation & Maintenance

Model VR6 System. Installation, Operation & Maintenance Model VR6 System Installation, Operation & Maintenance General: All Archer Instruments chlorination systems are carefully designed and tested for years of safe, accurate field service. All Archer Instruments

More information

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod)

Connection Thread M, R(PT), Rc(PT) How to Order. Applicable tube O.D. Thread. 8 ø8. ø10. ø12. ø16. Tube (Rod) One-touch Fittings Applicable etric Size Series K2 ow to Order Connection,, Rc(PT) Symbol 2 Body White Black Color Release button ight gray Blue Accessory Name Nipple K2N Different dia. nipple Adapter

More information

Your safety and the safety of others are very important.

Your safety and the safety of others are very important. NATURAL GAS TO PROPANE CONVERSION KIT ALPKT57- INSTALLATION INSTRUCTIONS PROPANE CONVERSION KIT SAFETY... INSTALLATION REQUIREMENTS... Tools and Parts... LP Gas Requirements... Table of Contents INSTALLATION

More information

CVI Valve Line. Exceeds the industry s highest standards for reliability and performance

CVI Valve Line. Exceeds the industry s highest standards for reliability and performance CVI Valve Line Exceeds the industry s highest standards for reliability and performance Available in the most standard models with the shortest lead times in the industry Exceptional quality every CVI

More information

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection Instruction Manual D100343X012 Type 1367 November 2017 Type 1367 High-Pressure Instrument Supply System with Overpressure Protection TYPE 252 FILTER 2ND-STAGE TYPE 67CF FILTER-STYLE REGULATOR INLET TYPE

More information

ADAPTABILITY & PRECISION

ADAPTABILITY & PRECISION ADAPTABILITY & PRECISION CALIBRATION GAUGES FOR CHEMICAL INJECTION SYSTEMS by KENCO FEATURING NEW AccuRate PRECISION PUMP SETTING GAUGE visit our online business center at: www.kenco-eng.com 2 AccuRate

More information

SECTION BUTTERFLY VALVES

SECTION BUTTERFLY VALVES SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class

More information

1200 Series Pressure Regulators

1200 Series Pressure Regulators SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of

More information

3 GALLON, OILLESS PANCAKE COMPRESSOR INSTRUCTIONS. Item #31289

3 GALLON, OILLESS PANCAKE COMPRESSOR INSTRUCTIONS. Item #31289 3 GALLON, OILLESS PANCAKE COMPRESSOR INSTRUCTIONS Item #31289 The EASTWOOD 3 GALLON, OILLESS PANCAKE COMPRESSOR, with an Integral Air Regulator, efficiently supplies all compressed air requirements for

More information

Mounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25

Mounting and Operating Instructions EB 3007 EN. Self-operated Pressure Regulators. Differential Pressure Regulators (opening) Type Type 42-25 Self-operated Pressure Regulators Differential Pressure Regulators (opening) Type 42-20 Type 42-25 Type 42-20 Differential Pressure Regulator Type 42-25 Differential Pressure Regulator Mounting and Operating

More information

SD 1520C SERIES 2000 DIRECT & REVERSE ACTING TYPE 2050 THREE WAY. DIRECT & REVERSE ACTING DIMENSIONS inches (mm) AND WEIGHTS pounds (kg)

SD 1520C SERIES 2000 DIRECT & REVERSE ACTING TYPE 2050 THREE WAY. DIRECT & REVERSE ACTING DIMENSIONS inches (mm) AND WEIGHTS pounds (kg) SD 520C PRINTED IN U.S.A. SD 520C/06 SERIES 2000 DIRECT & REVERSE ACTING DIRECT & REVERSE ACTING DIMENSIONS inches (mm) AND WEIGHTS pounds (kg) Dimensions Shipping Weight Size Type No. A B C D E F (Approx.)

More information

Specifications, Applications, Service Instructions & Parts EZ-SRV CARTRIDGE PRESSURE-RELIEF VALVES. For Ammonia and Halocarbon Refrigeration Systems

Specifications, Applications, Service Instructions & Parts EZ-SRV CARTRIDGE PRESSURE-RELIEF VALVES. For Ammonia and Halocarbon Refrigeration Systems Cat. Air I n l e t O u t l e t Bulletin SEP 211 Specifications, Applications, Service Instructions & Parts EZ-SRV CARTRIDGE PRESSURE-RELIEF VALVES For Ammonia and Halocarbon Refrigeration Systems EZ-SRV

More information

VARIABLE SLIPPAGE PUMP

VARIABLE SLIPPAGE PUMP VARIABLE SLIPPAGE PUMP Dover Artificial Lift, part of Dover Energy, is a team of industry-leading companies that utilize their collective resources to help oil & gas producers optimize revenues, profitability,

More information

PC3_ and PC4_ Pipeline Connectors

PC3_ and PC4_ Pipeline Connectors 1283050/4 IM-P128-06 ST Issue 4 PC3_ and PC4_ Pipeline Connectors Installation and Maintenance Instructions 1. Safety information 2. Description PC30 shown 3. Installation 4. Welding of pipeline connector

More information

Nitrous Oxide / Oxygen FLOOR MOUNTED OUTLET STATION Installation and Instructions

Nitrous Oxide / Oxygen FLOOR MOUNTED OUTLET STATION Installation and Instructions FM-171 Rev. B 8/00 Nitrous Oxide / Oxygen FLOOR MOUNTED OUTLET STATION Installation and Instructions MODEL 6300-1 PORTER INSTRUMENT COMPANY, INC. 245 TOWNSHIP LINE RD. P.O. BOX 907 HATFIELD, PA 19440-0907

More information

Choosing the right miniature instrument and control valve is a snap

Choosing the right miniature instrument and control valve is a snap Choosing the right miniature instrument and control valve is a snap INVALCO Micro Valve The Micro Valve is a unique miniature valve offering versatility and rugged construction. Since its introduction

More information

VIC offers a variety of Calibrated Gas Leaks

VIC offers a variety of Calibrated Gas Leaks CALIBRATED GAS LEAKS VIC offers a high quality line of calibrated gas leaks traceable to National Institute of Standards Technology (NIST). Calibrated gas leaks are used to provide a controlled delivery

More information

61 Series Pilots for Pilot-Operated Pressure Reducing Regulators

61 Series Pilots for Pilot-Operated Pressure Reducing Regulators Instruction Manual Form 583 Series June 20 Series Pilots for Pilot-Operated Pressure Reducing Regulators Failure to follow these instructions or to properly install and maintain this equipment could result

More information