High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

Size: px
Start display at page:

Download "High Pressure Equipment Medium Pressure Valves, Fittings and Tubing"

Transcription

1 igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle valves, fittings, line filters, check valves, safety heads, rupture discs, anti-vibration gland assemblies, tubing and nipples are engineered to the highest standards of repeatable quality. The reliable performance of these products has made ip one of the world s leading suppliers of elevated pressure components. Medium Pressure components use a compact coned-and-threaded connection which permits the larger bore sizes and increased flow rates common in this pressure class. Medium Pressure valves are available in,, /6",, " and /2" O.D. tubing sizes and five patterns to satisfy widely varied requirements. line of fittings is available to facilitate adapting to Taper Seal, igh Pressure or other threaded pipe systems. Index Page Valves* ittings Unions, ulkheads & Caps Line ilters & Check Valves Safety eads & Rupture Discs..... nti-vibration land ssemblies....8 Tubing Coned & Threaded Nipples Connection Details ppendix *Note: 0,000 psi large orifice is offered in and " size. R 4/4.

2 igh Pressure quipment L4 ( ) and L6 ( ) Medium Pressure Valves Medium Pressure (coned & threaded) type connections for,, /6",, " and /2" O.D. tubing. Non-rotating tip stems are standard for on-off service and ensure long life on valve seats. Regulating tip stems are available for all valves at no additional cost, add - R to part number. lands and collars for tubing are supplied with each valve unless otherwise requested (glands and collars shown on pages.4 and.). Materials include high tensile type 6 stainless steel bodies and hardened -4P stainless steel lower section stems. /2" O.D. valves are constructed of 220 duplex. Packing is Teflon (40 ) standard with optional Viton (0 ), UN-N (200 ) and rafoil (800 ) available at no additional cost. ir operators for remote control operation are available for all valves. (Refer to ir Operator section of catalog for additional data). xtreme temperatures can be accommodated by using extended stuffing boxes (See Specialty Valve section of catalog). L ( /6") Valve eatures Non-rotating stem tips Packing below stem threads Positive gland lock device Tube sizes through /2" Type 6 ss high tensile bodies No stem adjustment needed L4, L6 and L lack T-handles or choice of 4 colors L4, L6 and L 6 ss handles L2, L6 and L24 L2 ( ) and L6 (")* L24 ( /2") (Rated to,000 psi) * Note: 0,000 psi large orifice is offered in and " size..2 R /6

3 Medium Pressure Valves D L D L D L D L L D K D L K K K K K Two Way Straight Valves Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-L4 20,000 L4 4 2" /6" 2" /2" O.D. 20-L6 20,000 L6 /64" 4 2" /6" 2" /2" /6" O.D. 20-L 20,000 L /6" 6 2 /2" /2" 2 /2" /2" " O.D. 20-L2 20,000 L2 /6" " " /2" /6" O.D. 0-L2 0,000 L2 /64" " " /2" /6" " O.D. 20-L6 20,000 L6 /6" 8 2 /64" 4 /6" 4 2 /2" /6" " O.D. 0-L6 0,000 L6 /6" 8 2 /64" 4 /6" 4 2 /2" /6" /2" O.D. -L24,000 L24 /6" 4 /64" 2 6 /2" /2" 2 Two Way ngle Valves Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-2L4 20,000 L4 4 /6" 2" _ 2 /6" /2" O.D. 20-2L6 20,000 L6 4 /6" 2" _ /64" 2 /6" /2" /6" O.D. 6 2 _ /2" 20-2L 20,000 L /6" /2" /2" " O.D. 20-2L2 20,000 L2 /2" " _ /6" 2" 4 /6" O.D. 0-2L2 0,000 L2 /2" " _ /64" 2" 4 /6" " O.D. 20-2L6 20,000 L6 4 _ /6" 2 /6" /6" 2 /2" /6" " O.D. 0-2L6 0,000 L6 4 _ /6" 2 /6" /6" 2 /2" /6" /2" O.D. -2L24,000 L24 6 /64" _ /6" " 6 /2" 2 Three Way Valves / Two Pressure Connections Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-L4 20,000 L4 " 2" " /6" 2 /2" O.D. 20-L6 20,000 L6 /64" " 2" " /6" 2 /2" /6" O.D. 20-L 20,000 L /6" 6 2 /2" /2" /2" " O.D. 20-L2 20,000 L2 /6" " /6" O.D. 0-L2 0,000 L2 /64" " /6" " O.D. 20-L6 20,000 L6 /6" 4 2 /6" 2 /2" /6" " O.D. 0-L6 0,000 L6 /6" 4 2 /6" 2 /2" /6" Three Way Valves / One Pressure Connection Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-4L4 20,000 L4 4 /6" 2" 2 /6" /2" O.D. 20-4L6 20,000 L6 /64" 4 /6" 2" 2 /6" /2" /6" O.D. 20-4L 20,000 L /6" 6 2 /2" /2" /2" " O.D. 20-4L2 20,000 L2 /6" /2" " 2" 2" 4 /6" O.D. 0-4L2 0,000 L2 /64" /2" " 2" 2" 4 /6" " O.D. 20-4L6 20,000 L6 /6" /6" 2 /2" /6" " O.D. 0-4L6 0,000 L6 /6" /6" 2 /2" /6" Three Way / Two Stem Connection Valves Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-L4 20,000 L4 2" /6" /6" /2" O.D. 20-L6 20,000 L6 /64" 2" /6" /6" /2" /6" O.D. 20-L 20,000 L /6" 8 2 /2" 2 /6" /2" /2" " O.D. 20-L2 20,000 L2 /6" " 2 6 /2" /6" O.D. 0-L2 0,000 L2 /64" " 2 6 /2" /6" " O.D. 20-L6 20,000 L6 /6" 2 /6" /6" 8 2 /2" /6" " O.D. 0-L6 0,000 L6 /6" 2 /6" /6" 8 2 /2" /6" Replaceable Seat Valves Tubing Catalog No. psi Connection Orifice D K L Thickness O.D. 20-2L4-R 20,000 L4 2" _ 2 /6" /2" O.D. 20-2L6-R 20,000 L6 2" _ /64" 2 /6" /2" /6" O.D. 8" 2 _ /2" 20-2L-R 20,000 L /6" /2" /2" " O.D. 20-2L2-R 20,000 L2 8 " _ /6" 2" 4 /6" O.D. 0-2L2-R 0,000 L2 8 " _ /64" 2" 4 /6" " O.D. 20-2L6-R 20,000 L6 /6" /6" 4 _ /6" 2 /6" /6" 2 /2" /6" " O.D. 0-2L6-R 0,000 L6 /6" /6" 4 _ 2 /6" /6" 2 /2" /6" igh Pressure quipment Company R4 2/6 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website:

4 igh Pressure quipment lands/collars/plugs lbows/tees/crosses complete range of elbows, tees, and crosses is available for all of the tubing connection sizes. Material is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Connection Components Tube Catalog No. Size 20-2LM4 20-2LM6 20-2LM /6" 20-2LM2 20-2LM6 " -2LM24 /2" land Tube Catalog No. Size 20-2L4 20-2L6 20-2L /6" 20-2L2 20-2L6 " -2L24 /2" Collar Tube Catalog No. Size Plug 20-LM4 20-LM6 20-LM /6" 20-LM2 20-LM6 " -LM24 /2" Medium Pressure lbows Pressure Rating Catalog No. psi Connections - Thickness 20-22L4 20,000 O.D. TU L4 /6" " /6" 20-22L6 20,000 O.D. TU L6 " " 20-22L 20,000 /6" O.D. TU L " 20-22L2 20,000 O.D. TU L2 2 2 /2" /2" 20-22L6 20,000 " O.D. TU L6 " " 2 /6" 2 /6" -22L24,000 /2" O.D. TU L24 4" C Medium Pressure Tees Pressure Rating Catalog No. psi Connections --C Thickness 20-2L4 20,000 O.D. TU L4 " /6" 20-2L6 20,000 O.D. TU L6 2" " " 20-2L 20,000 /6" O.D. TU L 2 /2" " 20-2L2 20,000 O.D. TU L2 " 2 /2" /2" 20-2L6 20,000 " O.D. TU L6 4 " 2 /6" 2 /6" -2L24,000 /2" O.D. TU L24 4" C D Medium Pressure Crosses Pressure Rating Catalog No. psi Connections --C-D Thickness 20-24L4 20,000 O.D. TU L4 /6" 20-24L6 20,000 O.D TU L6 2" 2" " " 20-24L 20,000 /6" O.D. TU L 2 /2" 2 /2" " 20-24L2 20,000 O.D. TU L2 " " /2" /2" 20-24L6 20,000 " O.D. TU L /6" 2 /6" -24L24,000 /2" O.D. TU L R 2/4

5 Union Couplings (Slip Type) Union (slip type) couplings are ideal for use in confined space installations. This design allows the entire coupling to be disconnected and slipped back over the tubing to facilitate assembly and disassembly. In installations where tubing is easily assembled, it is preferable (and less expensive) to use standard straight couplings (see section 8.0). Standard material is high tensile 6 stainless steel. Standard tubing collars and glands are provided unless otherwise specified. ulkhead Couplings ulkhead couplings are designed specifically for passing a tubing connection through a panel or steel barricade. These couplings include a locknut as shown. Material is high tensile 6 stainless steel. Standard tubing collars and glands are included unless otherwise specified. Catalog No. Tubing psi Orifice Length ex 20-2L4-U O.D. 20,000 L4 L4 /6" 20-2L6-U O.D. 20,000 L6 L6 /2" 20-2L-U /6" O.D. 20,000 L L 2 /64" 2 " 20-2L2-U O.D. 20,000 L2 L2 /64" 2 /2" 20-2L6-U " O.D. 20,000 L6 L6 /6" /2" -2L24-U /2" O.D.,000 L24 L24 /6" " 2 Locknut Catalog No. Tubing psi Connections Orifice Length ex ole Diameter 20-2L4- O.D. 20,000 L4 " /6" 20-2L6- O.D. 20,000 L6 /2" 2" " /6" 20-2L- /6" O.D. 20,000 L 2 /64" L2- O.D. 20,000 L2 /64" 2 /6" 20-2L6- " O.D. 20,000 L-6 /6" /2" 2 /6" -2L24- /2" O.D.,000 L24 /6" " 2 /2" 2 /6" Caps Tubing end caps are offered for use in sealing off tubing ends either for temporary use or permanent use, such as on small volume reservoirs. Standard material is high tensile 6 stainless steel. Standard tubing collars and glands are provided unless otherwise specified. Catalog No. Tubing psi Length ex 20-2L4-C O.D. 20,000 L4 20-2L6-C O.D. 20,000 L6 20-2L-C /6" O.D. 20,000 L /2" " 20-2L2-C O.D. 20,000 L2 2 /2" 20-2L6-C " O.D. 20,000 L6 " -2L24-C /2" O.D.,000 L24 /2" 2 igh Pressure quipment Company R2 2/4 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website:

6 igh Pressure quipment Line ilters The line filters as shown utilize sintered stainless steel filter discs 4 pc./set. Porosities are available as per the chart to the right. If not otherwise specified, 00 micron filter discs are supplied. (One micron = 0.00 millimeters). Material of body, caps and cover is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. LOW Micron Size ilter vailable Catalog No. Tubing psi Connections Orifice Length Thickness L4 O.D. 20,000 L4 20-L6 O.D. 20,000 L6 /2" 20-L /6" O.D. 20,000 L 2 /64" all Check Valves all type check valves insure flow in one direction only. Material for body, caps and cover is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Note: 20-4L6 material -4P Soft Seat Check Valves Soft seat check valves insure flow in one direction LOW only and can be mounted in any position. These are highly reliable for both gas and liquid service. Standard material for the sealing surface (soft seat) is una-n (nitrile) on, and /6" models, and Teflon on and " models, with other materials (including each of these, as well as Viton) available upon request. Temperature is limited by the choice of O-ring Catalog No. Tubing psi Connections Orifice Length Thickness material. Material of all other parts 20-4L4-T O.D. 20,000 L4 is high tensile 6 stainless steel. " Standard glands and collars are provided unless otherwise specified. 20-4L6-T 20-4L-T O.D. /6" O.D. 20,000 20,000 L6 L /2" 2 /64" 4 /2" " Note: 20-4L6 material -4P LOW Catalog No. Tubing psi Connections Orifice Length Thickness 20-4L4 O.D. 20,000 L4 " 20-4L6 O.D. 20,000 L6 /2" " 20-4L /6" O.D. 20,000 L 2 /64" 4 /2" 20-4L2 O.D. 20,000 L2 /6" 20-4L6 " O.D. 20,000 L6 /6" 6 /2" 2 /2" 20-4L2-T O.D. 20,000 L2 /6" 20-4L6-T " O.D. 20,000 L6 /6" 6 /2" 2 /2".6 R4 2/

7 Safety eads The male inlet design can be inserted directly into the tubing connections of valves and various fittings such as tees and crosses, or located in pressure vessels. Outlet connections are pipe (NPT). This outlet may be connected to a suitable discharge line to vent pressure to a safe location in the event of bursting of the rupture disc. Torque required for sealing rupture discs will range from 40 to 0 foot pounds, depending upon pressure and media being used. Material of body and hold down nut is high tensile 6 stainless steel. Standard tubing glands and collars are provided unless otherwise specified. Note: Rupture discs are not included and must be ordered as a separate item. Catalog No. Tubing psi Connections Orifice Length ex 20-6LM4 O.D. 20,000 LM4 0.2" 2" " 20-6LM6 O.D. 20,000 LM6 0.2" 2" " 20-6LM /6" O.D. 20,000 LM 0.20" 2 " 20-6LM2 O.D. 20,000 LM2 0.20" LM6 " O.D. 20,000 LM6 0.20" /2" Rupture Discs /4 " ngled Seat /4 " effective area SPCIL DISCS are available on special order for pressure ranges not shown above and in numerous materials and coatings. Consult factory for price and delivery. Standard rupture discs are available from stock in burst pressures as listed in the chart below. ll pressures through are shaded. These discs are 6 stainless steel (except for,000 psi which are inconel) and may be used with any of the safety heads shown. Note that these rupture discs are supplied with a tolerance of plus 6% and minus % of specified burst pressure. Samples of each batch are tested and the actual average burst pressure is stamped on an accompanying metal tag. actors influencing rupture disc life include corrosion, metal fatigue, and cyclic effects. Periodic replacement is recommended to prevent premature failure. Standard urst Pressures (in psi at 2 ),000,00 2,000 2,00,000,00 4,000 4,00,000,00 6,000 6,00,000,00 8,000 8,00,000,00 0,000 0,00,000,00 2,00,000,00 8,000 20,000 22,00 2,000 2,000 0,000,000,00 40,000 4,000 0,000,000 60,000 6,000 igh Pressure quipment Company R /0 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website:

8 igh Pressure quipment nti-vibration land ssemblies Tubing systems that are subject to extreme vibration or shock, such as mobile pressure systems or long tubing runs culminating at a compressor, will benefit from the use of igh Pressure quipment Company's nti-vibration land ssemblies. These assemblies utilize the same reliable connection geometries as the standard ip fittings, with the added benefit of essentially unlimited vibrational fatigue life. coned and threaded tube, when subjected to unusual or excessive vibration, may fail prematurely and break at the last thread. The nti-vibration land ssembly acts to move the fulcrum of vibration away from the threaded portion of the tube and onto the strong, solid wall of the tubing. wedge-like collet firmly holds the assembly in place, virtually eliminating premature tubing failure while reliably maintaining a leak-free connection between the tube and the connection seat. Medium Pressure nti-vibration land ssemblies Pressure Rating Catalog No. psi Connections C 20-LM4 20,000 MDIUM PRSSUR /2" /6" 20-LM6 20,000 MDIUM PRSSUR 20-LM 20,000 /6" MDIUM PRSSUR " 20-LM2 20,000 MDIUM PRSSUR 2 20-LM6 20,000 " MDIUM PRSSUR /2" 2 /2" C nti-vibration Components Tubing Slotted Collet Collet Size Collet land ody Collar /4 " L4 /8 " /6 " /4 " " L L L L6.8

9 Medium Pressure Tubing Tubing is cold drawn, seamless, and is supplied in the /8 hard condition (not annealed). Tensile strength is approximately 40 percent higher than that of annealed tubing. ll tubing is manufactured in strict accordance with igh Pressure quipment Company specifications to insure tolerances and bore quality. Tubing is stocked in lengths of 8 to 22 feet but may be ordered in shorter lengths with no additional cutting charge. /4 " /8 " Working Type of Catalog Tubing Size Pressure psi Connection Used Material Order Number O.D. x 0.0" I.D. 20,000 MDIUM PRSSUR (L4) 6 SS 20-M4-6 O.D. x 0.20" I.D. 20,000 MDIUM PRSSUR (L6) 6 SS 20-M6-6 /6 " /4 " /6" O.D. x 0." I.D. 0,000 6 SS 0-M-6 /6" MDIUM PRSSUR (L) /6" O.D. x 0.2" I.D. 20, SS 20-M-04 6 SS 20-M-6 O.D. x 0.6" I.D. 0,000 0-M2-6 MDIUM PRSSUR (L2) 6 SS O.D. x 0.48" I.D. 20, M2-6 " /2 " " O.D. x 0.688" I.D. 0,000 0-M6-6 " MDIUM PRSSUR (L6) 6 SS " O.D. x 0.62" I.D. 20, M6-6 /2" O.D. x 0." I.D.,000 /2" MDIUM PRSSUR (L24) 6 SS -M24-6 Nipples Nipples are stocked in 6 stainless steel. Nipples in lengths other than those shown are supplied upon request. Nipples are not furnished with collars and glands, unless specified at time of order. Coned and Threaded Nipples Tubing Size (O.D. x I.D.) Length O.D. x /64" I.D. O.D. x /64" I.D. /6" O.D. x /6" I.D. O.D. x /64" I.D. O.D. x /6" I.D. " O.D. x /6" I.D. " O.D. x /6" I.D. /2" O.D. x /6" I.D. psi 2 " 4" 6" 8" 0" 2" 20-LM LM LM LM LM LM6-20-LM LM LM LM LM-4 20-LM-6 20-LM-8 20-LM-0 20-LM-2 0,000 psi 0-LM2-4 0-LM2-6 0-LM2-8 0-LM2-0 0-LM LM LM LM LM2-2 0,000 psi 0-LM6-6 0-LM6-8 0-LM6-0 0-LM LM LM LM LM6-2,000 psi -LM24-6 -LM24-8 -LM24-0 -LM24-2 igh Pressure quipment Company R 2/4 2 W. th Street rie, P 60 U.S.. Phone: (84) ax: (84) Website:

10 igh Pressure quipment Medium Pressure Connections (Coned and Threaded) service The Medium Pressure tubing connection is available for,, /6", and " O.D. tubing. The tubing may be prepared with the use of tooling (see tooling section.0) or prepared at the factory to specified lengths. dditionally, standard length coned and threaded nipples are available from stock (see page.). This connection has become an industry standard for use at elevated pressures and temperatures in both liquid and gas applications. It may be disassembled and retightened indefinitely. The threads of the gland are right-hand while the threads of the collar and tubing are left-hand to prevent rotation of the collar during assembly. L4 /4 " O.D. Tubing emale Opening Detail /6" - 20 /2" L6 /8 " O.D. Tubing /6 " - 8 /8 " L /6 " O.D. Tubing /6 " - 6 /4 " L2 /4 " O.D. Tubing /4 " - 4 NPSM /6 " L6 " O.D. Tubing - /8 " - 2 T'D Tubing land Collar Materials. ll of the components required for make-up of a Medium Pressure connection (glands, collars and plugs) are produced in Type 6 stainless steel. lands and collars. ll valves and fittings are provided (except nipples) unless otherwise requested. (See chart on the right for size details and catalog numbers). - /6 " L24 /2 " O.D. Tubing - /8 " 2" Thread - /8 " /6" /2 " 2 /64 " /64 " /6 " /2 " /8 " /6 " - /8 " L4 L6 L L2 L6 /8 " L X X - /8 " ex /2" /6" -/6" - /2" /6" - land /6 " 2 /6" /6" /6" NPSM /8 " 2" Thread 20-2LM4 20-2LM6 20-2LM 20-2LM2 20-2LM6-2LM24-24 L.. /6" -8 L.. -6 L "-4 L.. - /2" 2 L L.. /2" /6" /2" Collar Plug " /2" - 2/2" 20-2L4 20-2L6 20-2L 20-2L2 20-2L6-2L24 /6" -/6" /6" - - -/6" 2-2" /2" 2-/6" Tube nd Prep /2" 2/2" 20-LM4 20-LM6 20-LM 20-LM2 20-LM6 -LM24 2/2" /6" -/6" /2" /6 " /2 " /8 " 2/2 " /6 " /64" /4 " /2 " /6 " /6 " /6 " /8 " - 24 L.. 2/2 /6 " - 8 L.. " -/6" - 28 L.. I.D. /4 " - 6 L.. -/2" LM4 LM6 LM LM2 LM6 " - 4 L.. 2 L.. LM24. ppendix R 4/4

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle

More information

High Pressure Equipment Taper Seal Valves, Fittings and Tubing

High Pressure Equipment Taper Seal Valves, Fittings and Tubing igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle

More information

General Information valve design valve selector guide catalog numbering system warranty terms

General Information valve design valve selector guide catalog numbering system warranty terms CERTIFIED High Equipment Table of Contents 2 eneral Information valve design valve selector guide catalog numbering system warranty terms Low Valves, Fittings and Tubing - 0,000 and 5,000 psi service Taper

More information

Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi

Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed

More information

Medium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi

Medium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi Medium Pressure Valves, ittings and Tubing Pressures to 22,00 psi MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality

More information

Hydrogen Valves, Fittings and Tubing

Hydrogen Valves, Fittings and Tubing Hydrogen Valves, Fittings and Tubing utech is a leading brand of high-pressure valves, fittings and tubing designed to meet the critical requirements of today s most severe applications. We prove our commitment

More information

High Pressure Equipment 1 - Low Pressure Valves, Fittings and Tubing 10,000 and 15,000 psi service

High Pressure Equipment 1 - Low Pressure Valves, Fittings and Tubing 10,000 and 15,000 psi service Solutions de régulation des fluides igh quipment - Low Valves, ittings and Tubing 0,000 and,000 psi service Petrometalic SA 2, rue de l rmitage 8000 VRSAILLS www.petrometalic.com packers@petrometalic.com

More information

High Pressure Equipment Pressure Vessels and Reactors Index

High Pressure Equipment Pressure Vessels and Reactors Index Pressure Vessels and Reacrs High Pressure Equipment Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications. We have over 0 standard

More information

High Pressure Equipment 2 - Medium Pressure Valves, Fittings and Tubing 20,000 psi service

High Pressure Equipment 2 - Medium Pressure Valves, Fittings and Tubing 20,000 psi service Solutions de régulation des fluides High Pressure Equipment 2 - Medium Pressure Valves, Fittings and Tubing 20,000 psi service Petrometalic SA 2, rue de l Ermitage 78000 VERSAILLES www.petrometalic.com

More information

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard

More information

INDEX SHPE SMPSC SMPG SHPT SMPBC SMPCR SHPCR SMPCP SMPP SHPSC SMPN SMPE SHPUC SHPBC SHPP SHPN. High Pressure Fittings. Pg. 9. Pg. 5. Pg. 3. Pg.

INDEX SHPE SMPSC SMPG SHPT SMPBC SMPCR SHPCR SMPCP SMPP SHPSC SMPN SMPE SHPUC SHPBC SHPP SHPN. High Pressure Fittings. Pg. 9. Pg. 5. Pg. 3. Pg. High Fittings Micro Weld Fittings INDEX SMPG Pg. 3 SMPUC Union Coupling (Slip Type) Pg. 5 SHPE Elbow Pg. 9 Gland SMPCR Pg. 4 SMPBC Bulkhead coupling Pg. 5 SHPT Tee Pg. 10 Collar SHPC Pg. 10 SMPP Pg. 4

More information

Hip Air Operated Valves

Hip Air Operated Valves Hydraulic & Offshore Supplies Hip Air Operated s YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Air Operated s High Pressure Equipment Company

More information

HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT

HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Ultra Valve cross sections Handle Gland with packing of copper aluminium alloy for smooth running Body Non- stem of 17-4 PH prevents scoring

More information

Standard Operating and Maintenance Instructions for Pumping System Model PS-90

Standard Operating and Maintenance Instructions for Pumping System Model PS-90 Standard Operating and Maintenance Instructions for Pumping System Model PS-90 High Pressure Equipment Company 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075

More information

Specialty Products. Specialty Products Index

Specialty Products. Specialty Products Index Specialty Products MAXIMATOR has been designing and manufacturing specialty products to serve the high pressure market for over thirty years and has a worldwide reputation for quality and reliability.

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

High Pressure Equipment Pressure Vessels and Reactors

High Pressure Equipment Pressure Vessels and Reactors Vessels and Reacrs Company designs and manufactures a broad range of pressure vessels and reacrs for both bench-scale and pilot plant applications.we have over 0 standard reacr designs which address varied

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS HIGH PRESSURE PUMP To minimize vibration, it is best to build brackets on the motor itself, similar to alternator brackets. Use cardboard to construct a pattern first before making

More information

Index 7.1. Page R2 12/99

Index 7.1. Page R2 12/99 High Equipment Air Operated s High Equipment Company offers five lines of air operators to accommodate remote operation of pressure valves up to 00,000 psi. Various models of diaphragm and piston operated

More information

Index 7.1. Page R2 12/99

Index 7.1. Page R2 12/99 High Equipment Air Operated s High Equipment Company offers five lines of air operators to accommodate remote operation of pressure valves up to 00,000 psi. Various models of diaphragm and piston operated

More information

Sample C ylinde rs, Acce ssorie s, and O utage Tube s

Sample C ylinde rs, Acce ssorie s, and O utage Tube s www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample

More information

Continental Industries TRANSITION FITTINGS or FAX Visit

Continental Industries TRANSITION FITTINGS or FAX Visit Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an

More information

Standard Operating and Maintenance Instructions for Pumping System Model PS-150

Standard Operating and Maintenance Instructions for Pumping System Model PS-150 Standard Operating and Maintenance Instructions for Pumping System Model PS-150 High Pressure Equipment Company, LLC 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075

More information

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Installation, Operation and Maintenance Manual for Back Pressure Regulator Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN

More information

Fittings, Materials and Tubing Guide. Instrumentation Products

Fittings, Materials and Tubing Guide. Instrumentation Products Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products MPI Medium Fittings Introduction Hannifin Fittings are engineered and manufactured to provide secure,

More information

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,

More information

Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.

Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8 to 1 (6mm to 25mm) O.D. Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications

More information

Go to Table of Contents. Ball and Plug Valves

Go to Table of Contents. Ball and Plug Valves Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications

More information

COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC

COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK

More information

Full Range Pressure Compensating Variable Flow Control

Full Range Pressure Compensating Variable Flow Control Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever

More information

Medium Pressure Products MPI Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range. Catalog 4234 Revised, September 2003

Medium Pressure Products MPI Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range. Catalog 4234 Revised, September 2003 Medium Pressure Products Fittings, Valves, Regulators and Hoses 6,000-20,000 PSI Range Catalog 4234 Revised, September 2003 Fittings Medium Pressure Fittings Introduction Parker Hannifin Fittings* have

More information

SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION

SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

INSERT FITTINGS INSERT FITTINGS

INSERT FITTINGS INSERT FITTINGS Insert Tee Insert x Female Tee Insert Elbow Insert x Male Elbow Insert Coupling Insert x Male Adapter Insert x Female Adapter Insert Plug POLY and NYLON FITTINGS For use with Poly Tubing Fitting 1/2 3/4

More information

Tools & Installation. Tools & Installation Index

Tools & Installation. Tools & Installation Index L Radius +0 59-2 32 60 +2 A B -0 32 C E F.09" ia. Weep Hole Tools & Installation MAXIMATOR offers manual Coning and Threading tools that are designed to prepare accurate tubing ends to accept the medium,

More information

40K TLX Nozzles 40K TLX

40K TLX Nozzles 40K TLX 40K TLX Nozzles 40K TLX Application/Features: These nozzles are designed specifically for use with Flex or Rigid Lances having male Autoclave-type High Pressure threads. The TLX Nozzle features a special

More information

2003 WJTA American Waterjet Conference August 17-19, 2003 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT?

2003 WJTA American Waterjet Conference August 17-19, 2003 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT? 23 WJTA American Waterjet Conference August 17-19, 23 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT? D. Wright, J. Wolgamott, G. Zink StoneAge, Inc. Durango, Colorado, U.S.A. ABSTRACT At present

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

Operating Procedures for GripTight 15.5 SDR & IPS Test Plugs

Operating Procedures for GripTight 15.5 SDR & IPS Test Plugs EST Group DC2518 08/01 REV 3 12/12 Page 1 of 6 Operating Procedures for GripTight SDR & IPS Test Plugs WARNING For proper operation, GripTight plugs must be assembled as shown in Figure 1. Pressure testing

More information

V-24 OXYGEN LANCE VALVE

V-24 OXYGEN LANCE VALVE INSTRUCTIONS for F-4737-U May, 2009 V-24 OXYGEN LANCE VALVE w/ C -Size Inlet w/ B -Size Inlet V-24 Oxygen Lance with 1/8" Pipe Holder... 9728D65... 2218939 V-24 Oxygen Lance with 1/4" Pipe Holder... 9728A65...

More information

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12

PN LINE. Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 8_9 10_12 PN LINE PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN 27 PN 28 PN 29 PN 37 PN 38 PN 39 PN 40 PN 43 PN 10 Technical remarks PN 11 PN 13 PN 14 PN 15 PN 17 PN 18 PN 20 PN 23 PN 25 PN 26 PN

More information

INTERLOCKED METAL HOSE

INTERLOCKED METAL HOSE INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked

More information

Ball Valves Subsea Series

Ball Valves Subsea Series Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand

More information

TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS

TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS O-Ring Face Seal Hose TRADITIONAL HIGH VIBRATION HOSE SYSTEM THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS O-Ring Face Seal METAL FORMING SOLUTIONS THE STANDARD FOR MANY AUTOMOTIVE APPLICATIONS Table of

More information

PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660

PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660 PILOT OPERATED PRESSURE VACUUM RELIEF VALVE MODEL 1660 Patent Protected Premium Seat Tightness to Set Pressure Snap or Modulating Valve Action Provides Ability to Meet Clean Air Act Requirements 600 TYPICAL

More information

On-Off Connector Skirt

On-Off Connector Skirt On-Off Connector Skirt Retrievable Packers & Accessories The On-Off Connector Skirt is compact, reliable, fully sealing, J-type tubing disconnect device that automatically engages and releases with a small

More information

High Pressure Check Valves

High Pressure Check Valves High Pressure heck Valves Pressures to 60,000 psi (4137 bar) O-Ring heck Valves Minimum operating temperature for standard o-ring check valves 0 F (-17.8 ). For low temperature option to -423 F (-252 )

More information

PRO-50 Instrument Supply Regulator

PRO-50 Instrument Supply Regulator Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits

More information

1305 Series Pressure Reducing Regulators

1305 Series Pressure Reducing Regulators Instruction Manual Form 1095 1305 Series October 2009 1305 Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,

More information

High Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves

High Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +9 9 9 9 Fax: +9 9 9 9 FITOK, Inc. North Promenade

More information

Pressure Dump Valve Service Kit for Series 2300 Units

Pressure Dump Valve Service Kit for Series 2300 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit

More information

PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION

PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16

More information

MV-Series High-Pressure Valves USER GUIDE

MV-Series High-Pressure Valves USER GUIDE MV-Series High-Pressure Valves USER GUIDE 369 Syringa Ridge Sandpoint, ID 83864 281.782.8312 www.vindum.com support@vindum.com V:1.0 (6-27-17) This page is intentionally blank. Copyright 2017 Vindum Engineering,

More information

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator. RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to

More information

// ADapters GUIDelines

// ADapters GUIDelines // ADapters GUIDelines ADAPTER SELECTION Selection of an appropriate ALFAGOMMA adapter for a given application depends on the fluid system operating parameters listed below and the tube material and wall

More information

Continental Industries STEEL SERVICE TEES or FAX Visit

Continental Industries STEEL SERVICE TEES or FAX Visit Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

VCO O-ring Face Se al Fit tings

VCO O-ring Face Se al Fit tings www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................

More information

Sanitizer Parts. Sanitizer Parts. Replacement Parts for Sanitizers

Sanitizer Parts. Sanitizer Parts. Replacement Parts for Sanitizers Sanitizer Parts for Sanitizers 513 Automatic Feeder Model 300, 302, 300-19, 300-29 Order No.: R171016 R171026 Model No.: 300 302 Description: AUTOMATIC FEEDER SPA HOT TUB FEEDER 1 1 R172008W 3 in. threaded

More information

FILTER TYPE PRESSURE SNUBBER

FILTER TYPE PRESSURE SNUBBER FILTER TYPE PRESSURE SNUBBER Pressure oscillations and other sudden pressure changes can affect the delicate mechanisms of a pressure gauge or pressure transmitter. This can result in either complete failure

More information

SIMPLAIR PIPING TOOL. JXT Company

SIMPLAIR PIPING TOOL. JXT Company SIMPLAIR PIPING INGERSOLL-RAND SIMPLAIR PIPING With push-in fittings and lightweight anodized aluminum pipe, a SimplAir system provides ideal connection throughout your entire air distribution system.

More information

HEAVY DUTY PNEUMATIC

HEAVY DUTY PNEUMATIC HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11

More information

THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401

THE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401 THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special

More information

1800C and 1800C-HC Service Regulators

1800C and 1800C-HC Service Regulators SB 855.9 800C and 800C-HC Service Regulators Maximum Pressure 5 Table of Contents 800C Regulator Information...................... 800C-HC Regulator Information.................. 800C and 8C Service Regulators...............

More information

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8 and 1/4 PTF Port Sizes. Air line equipment. Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass

More information

MUELLER GAS. No-Blo Operations Using D-5. Drilling Machine. Reliable Connections. General Information 2

MUELLER GAS. No-Blo Operations Using D-5. Drilling Machine. Reliable Connections. General Information 2 operating Instructions manual MUELLER GAS TAble of contents PAGE No-Blo Operations Using D-5 General Information 2 Installing No-Blo Service Tees, Service Stop Tees and Curb Stop Tees 3-8 Reconditioning

More information

Schroeder Check Test Point System

Schroeder Check Test Point System Perforated polyamide / kevlar hose, 2 mm ID, 5 mm OD, plastic dust cap. L in (mm) P (max) psi (bar) 6 (150) 10,000 (680) 12 (300) 10,000 (680) 24 (610) 10,000 (680) 36 (915) 10,000 (680) 48 (1220) 10,000

More information

Model 1800 PFM Series Regulator. Technical Bulletin

Model 1800 PFM Series Regulator. Technical Bulletin Model 0 PFM Series Regulator Technical Bulletin Model 0 PFM Series Regulator 0 Elster American Meter The 0 PFM Series regulators are designed to control natural gas, air, nitrogen, carbon dioxide, propane

More information

MEDICAL CYLINDER VALVES

MEDICAL CYLINDER VALVES MEDICAL CYLINDER VALVES 3 1 Medical integrated valve for oxygen air and medical mixture 1.1 ALIONE 1.2 ALPINOX-valve 1.3 ALPINOX-valve compact 2 Cylinder valve with RPV for oxygen and medical gases -

More information

1805 Series Relief Valves

1805 Series Relief Valves Instruction Manual Form 1211 1805 Series October 2011 1805 Series Relief Valves! WARNING Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion

More information

1800CPB2 Service Regulators

1800CPB2 Service Regulators SB 8520.5 1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG Table of Contents 1800CPB2 Regulator Information................ 2-3 1800CPB2 Capacity Performance................ 4-6 1-1/4" Models,

More information

Halsey Taylor Owners Manual

Halsey Taylor Owners Manual Halsey Taylor Owners Manual Wall Mount Steel Refrigerated Fountains INSTALLER These series fountains are among the easiest to install Fountains on the market today. To assure you install these models easily

More information

Description Advanced Features Typical Applications

Description Advanced Features Typical Applications Series single stage, brass barstock line regulator Description Advanced Features Typical Applications The Series regulators are intended for secondary pressure control of noncorrosive, high purity or liquefied

More information

Pressure Dump Valve Service Kit for Series 3000 Units

Pressure Dump Valve Service Kit for Series 3000 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator

More information

Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction

Product Manual. Description. Specifications. CVS Type 1301F and CVS Type 1301G Regulator. Introduction Product Manual CVS Type 1301F and CVS Type 1301G Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS

More information

Buying more than 11 gauges? Call Lesman for additional discounts.

Buying more than 11 gauges? Call Lesman for additional discounts. Low Cost Liquid Filled Pressure Gauges Size: 1.5", 2", and 2.5" Accuracy: 2.5% of full scale Materials: Case and ring: 304 stainless steel; Window: Polycarbonate; Seals: Buna-N; Pointer: Black-finished

More information

BSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL

BSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical

More information

LRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.

LRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator. LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the

More information

(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R)

(1) Type (2) Thread size (T) (3) Wrench size specification : inch spec. (NPT, UNF) : mm spec. (M, R) This exhaust needle valve, which comes with silencer, controls the exhaust flow rate. The valve can be attached directly to a solenoid valve where a cylinder or like mechanism has no sufficient space around

More information

EASTERN ENERGY SERVICES PTE LTD. 60 Kaki Bukit Place #02-19 Eunos Tech Park Singapore, SG Singapore Telephone: Fax:

EASTERN ENERGY SERVICES PTE LTD. 60 Kaki Bukit Place #02-19 Eunos Tech Park Singapore, SG Singapore Telephone: Fax: 2 Table Of Contents 1. Introduction 3 2. About this Manual 3 3. Contacting YZ Systems 3 4. Vessel Components 4 5. Specifications 5 6. Application 6 7. Theory of Operation 7 8. DuraSite Installation & Use

More information

1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG

1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG A C E D SB-8520.2 1800CPB2 Service Regulators Maximum Inlet 125 PSIG AMC Quality System QMI is Accredited by: C R E D I T ISO 9001 Certified Certificate #006697 R E ANSI RAB G I S T R A R Dutch Council

More information

627 Series Pressure Reducing Regulators

627 Series Pressure Reducing Regulators 627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural

More information

4400 TwinHybrid Gas Seal

4400 TwinHybrid Gas Seal 4400 TwinHybrid Gas Seal EQUIPMENT PREPARATION MECHANICAL SEAL INSTALLATION INSTRUCTIONS 1 2 200.005" 0,13 mm 125 µ" 3,2 µm R a 3 4 32 µ" 0,8 µm R a 1000 ±.002" 0,05mm CAUTIONS These instructions are general

More information

Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable

Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable GEP-6075 Rev. B 101574 Ref. I.D.: 16973 Preparation and Installation of the Sanitary BDI-FLX Sensor and Connection to the BDI-FLX Interface Cable WARNING USER SHOULD READ AND THOROUGHLY UNDERSTAND THESE

More information

64 Series Pressure Reducing Regulators

64 Series Pressure Reducing Regulators Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,

More information

Installation Instructions

Installation Instructions 48011HW NATURAL GAS TO PROPANE CONVERSION KIT 58HDX, 359AAV, PG9YAB, PG9YAA Installation Instructions SAFETY REQUIREMENTS Installing and servicing heating equipment can be hazardous due to gas and electrical

More information

HIGH PRESSURE NOZZLES 2010 Catalog

HIGH PRESSURE NOZZLES 2010 Catalog HIGH PRESSURE NOZZLES 2010 Catalog 10,000-40,000 PSI 690-2758 Bar Gardner Denver Water Jetting Systems, Inc. publishes various guides for the safe use of Water Blasting Equipment and also recommends that

More information

Plant, components and devices for very high and high pressures (7000 bar and over)

Plant, components and devices for very high and high pressures (7000 bar and over) Plant, components and devices for very high and high pressures (7000 bar and over) HIGH PRESSURE GAS BOOSTER INTRODUCTION Multi-coupling system gas booster operate on the simple but efficient principle

More information

Hoses and Lances 20,000 PSI

Hoses and Lances 20,000 PSI Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large

More information

1200B2 Series Service Regulators. Instruction Manual

1200B2 Series Service Regulators. Instruction Manual 00B Series Service Regulators Instruction Manual 00B Series Service Regulators 0 Elster American Meter 00B Series Service Regulators General Information The 00B Series Service Regulators are available

More information

TEST SPECIFICATION NYT-909-C

TEST SPECIFICATION NYT-909-C 748 Starbuck Ave, Watertown, NY 13601 Phone: +1-315-786-5200 Engineering Fax: +1-315-786-5673 TEST SPECIFICATION NYT-909-C CODE OF TESTS FOR TESTING "AB" TEST RACK P/N 702546 & 702612 ISSUE NO. 5 1.0 THE

More information

Aquor House Hydrant V2

Aquor House Hydrant V2 Aquor House Hydrant V2 IN-WALL OUTDOOR FAUCET SYSTEM FLUSH-MOUNT QUICK-CONNECT SELF-DRAINING ANTI-SIPHON NON-FREEZE VBH-SERIES AQUOR HOUSE HYDRANT V2: WALL HYDRANT / FREEZELESS SILLCOCK Freezeless sillcock

More information

REGULATORS FOR SPECIFIC APPLICATIONS

REGULATORS FOR SPECIFIC APPLICATIONS SINGLE-STAGE REGULATORS FOR NITROUS OXIDE AND CARBON DIOXIDE (MODELS SG9011, SG9012, SG9014) Nitrous Oxide and Carbon Dioxide frequently cause ordinary regulators to freeze up. Models SG9011, SG9012 and

More information

Pressure Regulators. Aperflux 851

Pressure Regulators. Aperflux 851 Pressure Regulators Aperflux 851 80 1 2 3 4 5 6 7 Aperflux 851 > Pressure regulators Introduction Aperflux 851 is a boot style pilot-controlled pressure regulator for medium and high pressure applications.

More information

precision pipe fittings

precision pipe fittings Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com Sales-hoke@circor.com

More information

Push-In Fitting Type Pressure Gauge

Push-In Fitting Type Pressure Gauge http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Push-In Fitting Type 526 Compact Design. Pressure Indication by Tube Insertion into Push-In Fitting. Check Valve Silencer Controller

More information

Recommended applicable tubing. Specifications. Operating vacuum pressure. 20 C to 80 C Threads. Principal parts material

Recommended applicable tubing. Specifications. Operating vacuum pressure. 20 C to 80 C Threads. Principal parts material Series K Clean one-touch fittings For blowing Recommended applicable olyolefin: Series T Tubing material Soft polyolefin: Series TS Tubing O.D. ø, ø, ø, ø, ø olyurethane Series TU, Nylon Series T, and

More information

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D. 90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds

More information