High Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves

Size: px
Start display at page:

Download "High Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves"

Transcription

1 High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: Fax: FITOK, Inc. North Promenade lvd., Suite, Stafford, Texas, US Tel.: + Fax: + FITOK Incorporated -F, lock, Zone, Yingtailong lndustrial Park, alang Street, ao an istrict, Shenzhen, 9, hina Tel.: + Fax: + 9 FITOK Middle ast Oil quipment Trading LL -9, Makateb Tower, irport Road, P.O.ox, eira, ubai, U Tel.: Fax: info@fitokgroup.com FK-I-HV--N-

2 ontents leed Valves pressures to, psi ( bar) Gauge Valves pressures to, psi ( bar) leed Valves Pressures to, psi ( bar) Features One piece hex construction compact design allows easy installation. asy to assemble and replace O-Ring. Positive locking screw design prevents accidental removal of the stem. Tee handle for easy operation. Fluorocarbon FKM o-rings for operation from F (-. ) to F ( ). /" NPT outlet connection. High Pressure leed Valves, Gauge Valves and lock & leed Valves lock & leed Needle Valves Standard Materials of onstruction pressures to, psi (9 bar) Item omponent Material Grade/STM Specification ouble lock & leed Needle Valves pressures to, psi (9 bar) Handle Screw Handle Locking screw ody Stem SS/9 S/ ouble lock & leed all Valves O-Ring Lubricant Fluorocarbon FKM Molybdenum disulfide/fluorinated-based pressures to, psi ( bar) Special materials available on request. For the materials not shown above, please contact the authorized representative or FITOK Group. Technical ata Room Temperature psig (bar) FH 9 (, ( V FH 9 (, ( FH9 9 (, ( MP 9 (, (9) V MP 9 T 9 ( 9 (, (9), (9) T9 9 (, (9) MP 9 (, ( V MP9 T 9 ( 9 (, (, ( T9 9 (, ( variety of end connections available on request. For connections not shown above,

3 High Pressure leed Valves, Gauge Valves and lock & leed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves imensions Part escription Type Type Type VSS - T9 - FNS ody Material (Inlet) (Outlet) imensions (Type ) VSS-FH-FNS VSS-FH-FNS FH FH FNS FNS VSS-FH9-FNS FH9 FNS imensions (Type ) 9 ( 9 ( 9 (.9 (9.. (9.. () () 9 (.). (.9) () () () (.9) (.9) (.9) (.) (.) (.) V V V SS SS FH FH FH9 MP MP9 T T9 MP MP9 T T9 /" /" 9/" /" 9/" /" 9/" /" 9/" /" 9/" FNS /" NPT (Female) "Part escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. VSS-T-FNS VSS-T9-FNS VSS-T-FNS VSS-T9-FNS T T9 T T9 FNS FNS FNS FNS 9 ( 9 ( 9 ( 9 (. (9).9 (99..9 (99.. () (). (.). (.). (9) () () () () (.9) (.9) (.9) (.9) (.) (.) (.) (.) imensions (Type ) VSS-MP-FNS VSS-MP9-FNS VSS-MP-FNS MP MP9 MP FNS FNS FNS VSS-MP9-FNS MP9 FNS 9 ( 9 ( 9 ( 9 (. (.). (.). (.). (.) (.) (.) (.) (.) () () () () (.9) (.9) (.9) (.9) (.) (.) (.) (.) is the dimension of hex. is the dimension of stem in closed position.. ll dimensions are for reference only and are subject to change. For dimensions not shown above, please contact the authorized representative or FITOK Group.

4 High Pressure leed Valves, Gauge Valves and lock & leed Valves Gauge Valves Pressures to, psi ( bar) Features One inlet, three outlet ports. Metal-to-metal seating achives ideal shutoff, longer stem/seat service lifetime for abrasive flow, excellent corrosion resistance and greater durability for repeated on/off cycles. PTF is the standard packing material, RPTF glass also available. The material of packing gland and upper stem have been selected to achieve reduced handle torque and extended thread cycle life. The location of packing is under the thread of valve stem. The locking device of packing gland is reliable. Flow ata at F ( ) Pressure & Temperature Technical ata GV GV GV Type FH FH FH9 FH FH9 (. (. (. (. (. Room Temperature psig (bar), (, (9), (9), (, ( xtreme Temperatures PTF is the standard packing material for FITOK Needle Valve; RPTF glass also available. Normal Needle Valve with PTF packing can be operated to F ( ). Normal Needle Valve with RPTF glass packing can be operated to F ( ). variety of end connections available on request. For connections not shown above, High Pressure leed Valves, Gauge Valves and lock & leed Valves Rated V Temperature ( ) of turns open Vee Stem Tip 9 Flow oefficient v % Pressure (psig) (-9) (- (9) ( () () efore F( ) - Temperature ( F) ( (9) ( () ( ( ( Pressure (bar) Standard Materials of onstruction Item omponent Material Grade/STM Specification Handle Upper stem Gland Lower Stem Ring washer SS/9 / -PH/ / PTF/RPTF -PH/ ody SS/9 Lubricant Molybdenum disulfide Special materials available on request. For the materials not shown above,

5 High Pressure leed Valves, Gauge Valves and lock & leed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves imensions Part escription F GVSS - FH - TG ody Material G G GV GV GV SS SS FH FH FH9 FH FH9 /" /" 9/" /" 9/" TG PTF RPTF Glass H K "Part escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. L Outlet M Process Instrument Test/ imensions Type F G H K L M GVSS-FH GVSS-FH GVSS-FH9 GVSS-FH GVSS-FH9 FH FH FH9 FH FH9 (. (. (. (. (. ( ( ( ( (. (9. ). (9. ). ( 9. ). (9. ). ( 9. ) ( ( ( 9. 9) ( ( 9. 9) ( ) ( ) (. ( ) (. (. ) (. ) (. 9) (. ) (. 9). (. ). (. ). (. ). (. ). (. ) 9 (. 9 (. 9 (. 9 (. 9 (.. (.9). (.9). (.9). (.9). (.9) (. ( 9. ) ( 9. ) ( 9. ) ( 9. ) (. (. ( 9. ) ( 9. ) ( 9. ) (. ) (. ) (. ) (. ) (. ) M is the panel mounting drill size. H is the dimension of stem in closed position.. ll dimensions are for reference only and are subject to change. For dimensions not shown above,

6 High Pressure leed Valves, Gauge Valves and lock & leed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves 9 lock & leed Needle Valves Pressures to, psi (9 bar) Features ompact design offers advantages over configurations with multiple valves and fittings. Minimal space needed for installation and operation. ost savings from fewer components required. Reduced potential for leakage. Metal-to-metal seating achives ideal shutoff,longer stem/seat service lifetime for abrasive flow,excellent corrosion resistance and greater durability for repeated on/off cycles. The material of packing gland and upper stem have been selected to achieve reduced handle torque and extended thread cycle life. The location of packing is under the thread of valve stem. The locking device of packing gland is reliable. Standard Materials of onstruction Flow ata at F ( ) Pressure & Temperature of turns open Flow oefficient v % Vee Stem Tip 9 Pressure (psig) (-9) (- (9) ( () () Temperature ( ) efore F( ) - Temperature ( F) ( (9) (9) () ( () () Pressure (bar) Item omponent Material Grade/STM Specification Handle Gland Upper stem Lower Stem / SS/9 -PH/ Ring / washer PTF/RPTF -PH/ ody SS/9 Lubricant Molybdenum disulfide Technical ata Special materials available on request. For the materials not shown above, Type Rated V Room Temperature psig (bar) N FNS FNS 9 () 9 (), (, ( N FH FH 9 () 9 (), (9), (9) xtreme Temperatures PTF is the standard packing material for FITOK Needle Valve; RPTF glass also available. Normal Needle Valve with PTF packing can be operated to F ( ). Normal Needle Valve with RPTF glass packing can be operated to F ( ). variety of end connections available on request. For connections not shown above,

7 High Pressure leed Valves, Gauge Valves and lock & leed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves imensions Part escription F NSS - FH - TG G ody Material H N N SS SS FNS FNS /" NPT (Female) /" NPT (Female) TG PTF RPTF Glass FH FH /" /" M N G "Part escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. IN O P Gauge Q Process Outlet imensions NSS-FNS NSS-FNS NSS-FH NSS-FH FNS FNS FH FH 9 ( 9 ( 9 ( 9 ( F G G H M N O P Q. (9.). (9.). (. 9). (9.) (. (. ( ) (. (9. ) ( ) ( ) ( ) ( ) ( ) (.) (.) (.) (.) (. ) (. ) (. ) (. ) (. ) (. ) (. ) (. ) () () () () (. ) (. ) (. ) (. ). ( ). ( ). ( ). ( ) (9. ). (9.) (9. ). (9.) (9.) (9.) (9.) (9.) ( ( ( ( (9.) (9.) (9.) (9.) ( ( ( ( G is the drill dimension of packing gland mounting hole. G is the panel mounting drill size. H is the dimension of stem in closed position.. ll dimensions are for reference only and are subject to change. For dimensions not shown above,

8 High Pressure leed Valves, Gauge Valves and lock & leed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves ouble lock & leed Needle Valves Pressures to, psi (9 bar) Standard Materials of onstruction Features ompact design provides large valve performance in a small package. Reduced potential for leakage. Metal-to-metal seating achives ideal shutoff, longer stem/seat service lifetime for abrasive flow, excellent corrosion resistance and greater durability for repeated on/off cycles. The material of packing gland and upper stem have been selected to achieve reduced handle torque and extended thread cycle life. The location of packing is under the thread of valve stem. The locking device of packing gland is reliable. Wide selection of tube and pipe end fittings available. Flow ata at F ( ) Pressure & Temperature Temperature ( ) (-9) (- (9) ( () () ( (9) (9) of turns open Vee Stem Tip Pressure (psig) efore F( ) () ( () () Pressure (bar) 9 ottom View 9 Flow oefficient v % - Temperature ( F) Item omponent Material Grade/STM Specification Technical ata Handle Upper stem Gland SS/9 / N Type FH FH FH9 FH FH FH 9 () 9 () 9 () Rated v FH9 FH 9 () Room Temperature psig (bar), (9), (9), (9), (9) xtreme Temperatures PTF is the standard packing material for FITOK Needle Valve; RPTF glass also available. Normal Needle Valve with PTF packing can be operated to F ( ). Normal Needle Valve with RPTF glass packing can be operated to F ( ). variety of end connections available on request. For dimensions not shown above, 9 Lower Stem Ring washer ody valve stem valve Ring valve valve washer Lubricant -PH/ / PTF/RPTF -PH/ SS/9 -PH/ / PTF/RPTF -PH/ Molybdenum disulfide Special materials available on request. For the materials not shown above, please contact the authorized representative or FITOK Group.

9 High Pressure leed Valves, Gauge Valves and lock & leed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves imensions Part escription F NSS - FH - FH - TG M G M ody Material H N SS SS FH /" FH /" FH /" FH9 9/" TG PTF RPTF Glass Inlet Plugged FH9 9/" O N Outlet "Part escription" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. X Process Plug Q P Valve V ottom View imensions NSS-FH-FH NSS-FH-FH NSS-FH9-FH NSS-FH9-FH Type FH FH FH9 FH9 9 ( 9 ( 9 ( 9 (. (. (.. (. (.. (9. (.) (9.) () (.) (.) (.) (.) (.) (.) (.) (.) (.). (.) G is the drill dimension of packing gland mounting hole. G is the panel mounting drill size. H is the dimension of stem in closed position.. ll dimensions are for reference only and are subject to change. For dimensions not shown above, F G H M N O P Q V X. (9. (.) (.) (.) (.). (.). (.). (.). (.). (.) () () () (). (.). (.). (. ( 9 (.) 9 (.) 9 (.) 9 (.) () () () () (.) (.) 9 (.) 9 (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) (.) () () (9.) (9.)

10 High Pressure leed Valves, Gauge Valves and lock & leed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves ouble lock & leed all Valves Pressures to, psi ( bar) Standard Materials of onstruction Features One-piece, trunnion mounted style, ideal for severe duty applications. arbon filled PK seats offer excellent resistance to chemicals, heat, and wear/abrasion. Vee-stem vent valve. Full-port flow path minimizes pressure drop. cold worked stainless steel construction. Fluorocarbon FKM o-rings for operation from F (-. ) to F ( ). Wide selection of o-rings available. Wide selection of tube and pipe end fittings available. Quarter turn from open to close with positive stop. 9 9 Pressure & Temperature urve Temperature ( ) (- ( (9) () ( () (9) Item omponent Valve Material Pressure (psig) ( (9) ( Pressure (bar) Handle Set Screw Stopping evice all Stem Gland Stainless Steel Stainless Steel SS/ SS/9 SS/9 Locking Piece Valve ody SS/ SS/9 Temperature ( F) Thrust Washer / NOT: all valves are not recommended for critical gas applications such as Hydrogen, Helium or other small molecular gases. 9 ombination Seal Lock Nut Fluorocarbon FKM SS/ Seat Gland SS/9 otton Gland SS/9 Valve PTF Valve Stem -PH/ Valve Gland / Valve Handle Stainless Steel earing PK Seat Retainer SS/9 9 Seat arbon Filled PK Support SS/9 elleville ackup SS/9 elleville Washers -PH/9 Lubricant Molybdenum isulfide/fluorinated-based

11 High Pressure leed Valves, Gauge Valves and lock & leed Valves High Pressure leed Valves, Gauge Valves and lock & leed Valves 9 imensions Part escription No. Size Rated v atalog No. Pressure/Temperature Rating psig Room Temperature Process M J O N G K LOK THIKNSS F L FH FH FH FH9 FNS FH FH FH FH9 FNS FH FH FH FNS FNS FNS FNS FNS FNS FNS (.) (.) (.9) (.) (.) (.) (.) (.) (.) 9 (.) SS-FH-FNS- SS-FH-FH- SS-FH-FH- SS-FH9-FH- SS-FH9-FNS- SS-FH-FH- SS-FH-FNS- SS-FNS-FNS- SS-FNS-FNS- SS-FNS-FNS-, ( H SS - FH9 - FNS - F G H J K L M N O lock Thickness ody Material Size Size No.. (. (. ( (.) N: connection on back side. 9 (.) (.9) Panel Mounting imensions () (.) () (.).9 ( ( (.) () (. SS SS FH FH FNS NPT(Female) /" /" /" 9 9/" /" " FH FNS NPT(Female) /" /" (iameter) (Typical iameter) See Note Options: O-ring Fluorocarbon FKM is standard. For other materials, add a material code to the valve ordering number. xample: SS-FH9-FNS--N ode N F O-ring Material Fluorocarbon FKM NR FFKM Temperature Range to F (-. to ) - to F (- to ) - to F (- to ) PM - to F (- to ) "Part escription" is used for composition rules of FITOK product model, not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK group or authorized agent. ll dimensions are for reference only and are subject to change. ( (. (.) (.) (.) ody mounting /- thread

Sample Cylinders and Accessories

Sample Cylinders and Accessories Sample Cylinders and Accessories SC and MC Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 115, 6069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 Fax: +49 69 8900 4495 FITOK, Inc.

More information

VCO O-ring Face Se al Fit tings

VCO O-ring Face Se al Fit tings www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................

More information

Go to Table of Contents. Ball and Plug Valves

Go to Table of Contents. Ball and Plug Valves Ball and Plug s July 2014 Series s Parker series manually, pneumatically and electrically actuated two-way and three-way ball valves are designed for 1/4 and 1/2 turn media shutoff or switching applications

More information

Calibration Fittings and Hoses

Calibration Fittings and Hoses Calibration ittings and Hoses QH, QT, HQH and HQT Series ITOK Group ITOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany Tel.: +49 69 8900 4498 ax: +49 69 8900 4495 ITOK, Inc.

More information

Ball Valves Subsea Series

Ball Valves Subsea Series Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand

More information

Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi

Medium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed

More information

VCO O-Ring Face Seal Fittings

VCO O-Ring Face Seal Fittings O-Ring Face Seal Fittings www.swagelok.com O-Ring Face Seal Fittings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 Weld, VR,, Pipe, and Vacuum Fittings ontents Technical

More information

INSTRUMENTATION VALVES

INSTRUMENTATION VALVES INSTRUMENTATION VALVES INSTRUMENTATION BALL VALVES INTEGRAL-BONNET NEEDLE VALVES TOGGLE VALVES (TG Series) CHECK VALVES (CHV Series: For General Industry) RELIEF VALVES (RVL/RVH Series) INSTRUMENTATION

More information

Medium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi

Medium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi Medium Pressure Valves, ittings and Tubing Pressures to 22,00 psi MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality

More information

HIGH-PRESSURE RELIEF VALVES

HIGH-PRESSURE RELIEF VALVES HIGH-PRESSURE RELIEF VALVES H-9HP SERIES FEATURES n St.St. 316 Construction n MAWT up to 6 psi n Set Pressure from 5 psig to 6 psig ( 3.5 to 4 bar) n Identifying colored springs for each pressure range

More information

High Pressure Equipment Taper Seal Valves, Fittings and Tubing

High Pressure Equipment Taper Seal Valves, Fittings and Tubing igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle

More information

Specialty Products. Specialty Products Index

Specialty Products. Specialty Products Index Specialty Products MAXIMATOR has been designing and manufacturing specialty products to serve the high pressure market for over thirty years and has a worldwide reputation for quality and reliability.

More information

Propor tional Re lief Valve s

Propor tional Re lief Valve s www.swagelok.com Propor tional Re lief Valve s R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections Proportional Relief Valves

More information

Tank Blanketing Pressure Regulators RHPS Series

Tank Blanketing Pressure Regulators RHPS Series www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22

More information

Proportional Relief Valves

Proportional Relief Valves www.swagelok.com Proportional Relief Valves R Series Liquid or gas service Set pressures from 10 to 6000 psig (0.68 to 413 bar) 1/4 and 1/2 in. and 6 to 12 mm end connections 2 Proportional Relief Valves

More information

shutoff valves 900 Series psig Manual Shutoff Valves

shutoff valves 900 Series psig Manual Shutoff Valves 0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on

More information

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle

More information

INDUSTRIAL EXCESS ESS FLOW VALVES

INDUSTRIAL EXCESS ESS FLOW VALVES INDUSTRIAL EXCESS ESS FLOW VALVES H-911 SERIES FEATURES n Stainless Steel Construction n MAWP 6000 psi (413 bar) n MAWT 400 F (204 C) n Variable connection sizes (1/8 to 1/2'' & 6 to 12mm) n Cv = 0.5 ;

More information

Avenger Model 33M Installation & Operation Instructions

Avenger Model 33M Installation & Operation Instructions Avenger Model 33M Installation & Operation Instructions Manufacturing Contact Information A+ Corporation, LLC Call for expert product application assistance: 41041 Black Bayou Rd. Gonzales, LA 70737 Phone:

More information

64 Series Pressure Reducing Regulators

64 Series Pressure Reducing Regulators Instruction Manual Form 1245 64 Series March 2006 64 Series Pressure Reducing Regulators W1943 Figure 1. 64 Series Regulator Introduction Scope of Manual This manual provides instructions for the installation,

More information

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing

High Pressure Equipment Medium Pressure Valves, Fittings and Tubing igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle

More information

Full Technical Catalog For Specialty Gas Application

Full Technical Catalog For Specialty Gas Application VENT VAVE CYINDER INET A OUTET VAVE CYINDER RESSURE INET VAVE A A ROTATE OUTET RESSURE REGUATOR KNO TO CHANGE CYINDER IN SERVICE CYINDER RESSURE VENT ROCESS GAS SOURCE A INET VAVE VENT SOURCE VENT VAVE

More information

Variable Area Flow Meters

Variable Area Flow Meters Variable Area Flow Meters Over sixty years of variable area meter expertise Brooks started designing and manufacturing variable area (VA) meters, also referred to as rotameters, in 1946. Now, with more

More information

Precision and Instrument Regulators 1/4" port size

Precision and Instrument Regulators 1/4 port size Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38

More information

HP/UHP Spring-Loaded Regulator

HP/UHP Spring-Loaded Regulator Description HP (High Purity) and UHP (Ultra High Purity) products are for service where the product must be kept free of contamination. The design is kept simple to minimise dead areas where contaminants

More information

Installation, Operation and Maintenance Manual for Back Pressure Regulator

Installation, Operation and Maintenance Manual for Back Pressure Regulator Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN

More information

SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION

SPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note

More information

Description Supply pressure Pressure range Connection Device Page max. bar bar thread

Description Supply pressure Pressure range Connection Device Page max. bar bar thread Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure

More information

Operation Manual Piston Sensed Gas Pressure Regulators

Operation Manual Piston Sensed Gas Pressure Regulators 687 Technology Way Napa, CA 94558 Phone: (707) 259-0102 FAX: (707) 259-0117 www.aptech-online.com Operation Manual Piston Sensed Gas Pressure Regulators (Models KT9, KT10, Welded KT10, KT12) Table of Contents:

More information

PRO-50 Instrument Supply Regulator

PRO-50 Instrument Supply Regulator Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits

More information

High-Purity. Ball Valves

High-Purity. Ball Valves High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free

More information

T208VR Series Tank Blanketing Vacuum Regulator

T208VR Series Tank Blanketing Vacuum Regulator February 2014 T208VR Series Tank Blanketing Vacuum Regulator Figure 1. Typical T208VR Series Vacuum Regulator Introduction The T208VR Series direct-operated vacuum regulators are used where a decrease

More information

Instruction Manual Updated 7/26/2011 Ver. 2.2

Instruction Manual Updated 7/26/2011 Ver. 2.2 4-Unit Model MB HTHP Filter Press #171-50-4: 115-Volt #171-51-4: 230-Volt Instruction Manual Updated 7/26/2011 Ver. 2.2 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:

More information

Standard Operating and Maintenance Instructions for Pumping System Model PS-90

Standard Operating and Maintenance Instructions for Pumping System Model PS-90 Standard Operating and Maintenance Instructions for Pumping System Model PS-90 High Pressure Equipment Company 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note

More information

Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002

Type ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002 Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact

More information

TONS! powerteam.com HEAVY LIFT CYLINDERS

TONS! powerteam.com HEAVY LIFT CYLINDERS NEW DESIGNS TONS! powerteam.com HEAVY LIFT CYLINDERS THE Precise MOST Positioning COMPREHENSIVE & ControlRANGE OF HIGH in a Responsive PRESSURE Package HEAVY LIFT CYLINDERS R_G SINGLE & DOUBLE ACTING,

More information

Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 )

Series variation. Silencer. High damping effect and 2 types of materials. Applicable cylinder bore size (mm) Effective sectional area (mm 2 ) Series variation High damping effect and types of materials Model / appearance Metering valve with silencer Model no. SMW-6 SMW-8 FMS-M SMW- SMW- (R) M M /8 / /8 / / / / 6 8 Effective sectional area (mm

More information

TEK-M ANIFOLD 7500A. Manifolds. Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys ACCESSORIES

TEK-M ANIFOLD 7500A. Manifolds.   Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys ACCESSORIES Technology Solutions TEK-M ANIFOLD 7500A Manifolds ACCESSORIES www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction Tek-Trol s Tek-Manifold 7500A is available

More information

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.

ALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8 and 1/4 PTF Port Sizes. Air line equipment. Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass

More information

61 Series Pilots for Pilot-Operated Pressure Reducing Regulators

61 Series Pilots for Pilot-Operated Pressure Reducing Regulators 61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally

More information

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI

FITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard

More information

627 Series Pressure Reducing Regulators

627 Series Pressure Reducing Regulators 627 Series Pressure Reducing Regulators Introduction The 627 Series direct-operated pressure reducing regulators (Figure 1) are for low and high-pressure systems. These regulators can be used with natural

More information

VEP-PSERIES INTERCHANGE > Stucchi VEP profile

VEP-PSERIES INTERCHANGE > Stucchi VEP profile VPPSRIS INRHAN > Stucchi VP profile HNIAL AURS AN OPIONS Interchange Stucchi VP profile Sealing description Nitrile NR onnection system Screw SUHI SOLUIONS Available sizes Material /treatment Available

More information

Sample C ylinde rs, Acce ssorie s, and O utage Tube s

Sample C ylinde rs, Acce ssorie s, and O utage Tube s www.swagelok.com Sample C ylinde rs, cce ssorie s, and O utage s Features Sizes from 10 to 3785 cm 3 (1 gal) Working pressures up to 5000 psig (344 bar) 304L and 316L stainless steel and alloy 400 2 Sample

More information

INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES

INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS 2-4 REDUCED PORT/ FULL PORT (5700/6700) ANSI CLASS 150/300/600/900/1500/2500 TRUNNION BALL VALVES PBV-USA,Inc. 12735 Dairy Ashford. Stafford, Texas USA 77477 281-340-5400; 800-256-6193 FAX: 281-340-5499 INDUSTRIAL BALL VALVES IM0 69 April 2001 Rev 9 INSTALLATION, MAINTENANCE & OPERATING INSTRUCTIONS

More information

Installation, Operation, and Maintenance Manual

Installation, Operation, and Maintenance Manual Installation, Operation, and Maintenance Manual Welker Probe Instrument Regulator Model The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for

More information

1200 Series Pressure Regulators

1200 Series Pressure Regulators SEE MORE AT SORInc.com Request Quote 1200 Series Pressure SOR pressure regulators are durable, high performing instruments that are designed to provide reliable control of pressure in various stages of

More information

Piloted Non-Return Valves

Piloted Non-Return Valves ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product

More information

gpphighpressure.com (417) BALL VALVES *Dimensions are subject to change and are considered reference.

gpphighpressure.com (417) BALL VALVES *Dimensions are subject to change and are considered reference. LL VLVS 51 *imensions are subject to change and are considered reference. 2 1 TURS & NITS O PP LL VLVS Trunnion style ball valves w/positive shut-off in 10,000-15,000-psi (689-104-179 bar) esigned for

More information

Homestead Series 820 AWWA Butterfly Valves

Homestead Series 820 AWWA Butterfly Valves Homestead Series 820 AWWA Butterfly Valves Dependable Valves for Water & Wastewater Service BODY: The ductile iron body meets or exceeds the design strength requirements of the AWWA C504 standards. Flange

More information

QUICK CONNECT FOR 2.0, 4.0 & 5.0 GASES

QUICK CONNECT FOR 2.0, 4.0 & 5.0 GASES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES BROEN LAB QUICK CONNECT FOR 2.0, 4.0 & 5.0 ES LAB TABLE OF CONTENTS Content Page Table of Content 2 BROEN-LAB

More information

COMMERCIAL. MK Series High Performance Butterfly Valve Specifications. Hot Water, Chilled Water, Condenser Water, Steam

COMMERCIAL. MK Series High Performance Butterfly Valve Specifications. Hot Water, Chilled Water, Condenser Water, Steam OMMRIL MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas

More information

VEP-HDSERIES INTERCHANGE > Stucchi VEP profile

VEP-HDSERIES INTERCHANGE > Stucchi VEP profile V-HSRIS INRHAN > Stucchi V profile HNIAL AURS AN OIONS SUHI SOLUIONS Interchange Stucchi V profile Sealing description Nitrile NR onnection system Screw HL version= lock system Available sizes Material

More information

CALEFFI. Reduced pressure zone backflow preventer. 574 series 01022/18 NA D E C F B D E. Function

CALEFFI. Reduced pressure zone backflow preventer. 574 series 01022/18 NA D E C F B D E. Function Reduced pressure zone backflow preventer series LEFFI 01022/18 N REITE ISO 9001 FM 216 ISO 9001 No. 000 Function The backflow preventer can be used in all plumbing systems where there is danger of the

More information

MEDICAL CYLINDER VALVES

MEDICAL CYLINDER VALVES MEDICAL CYLINDER VALVES 3 1 Medical integrated valve for oxygen air and medical mixture 1.1 ALIONE 1.2 ALPINOX-valve 1.3 ALPINOX-valve compact 2 Cylinder valve with RPV for oxygen and medical gases -

More information

ALF400 to 900, ALT-5/-9

ALF400 to 900, ALT-5/-9 Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential

More information

LRS(H)4 Pressure-Reducing Regulator User Manual

LRS(H)4 Pressure-Reducing Regulator User Manual LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered

More information

North American Simplex Basket Strainers for Gas and Oil

North American Simplex Basket Strainers for Gas and Oil Combustion North American Simplex Basket Strainers for Gas and Oil A mesh lining (304 stainless standard or 316 stainless or monel special), either 20, 40 or 100 mesh, can be provided, depending on the

More information

RegO Adapters, Connector, & Fittings

RegO Adapters, Connector, & Fittings RegO dapters, onnector, & Fittings Extended Type ouplings for Vapor and Liquid Service esigned especially for liquid filling and vapor equalization of LP-Gas and anhydrous ammonia. The limited travel of

More information

299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012

299H Series. Introduction. P.E.D. Categories. Specifications. Installation. Warning. Installation Guide English September 2012 Installation Guide English September 2012 299H Series Introduction This Installation Guide provides instructions for installation, startup, and adjustment of 299H Series regulators. To receive a copy of

More information

LRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator.

LRS(H)4 USER MANUAL. Read the complete manual before installing and using the regulator. LRS(H)4 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to the

More information

Continental Industries STEEL SERVICE TEES or FAX Visit

Continental Industries STEEL SERVICE TEES or FAX Visit Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

World Area Differences Technical Information

World Area Differences Technical Information World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National

More information

JR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE

JR Series. Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE JR Series Gas Pressure Reducing Valve GAS PRESSURE REDUCING VALVE The LowFlow JR Series line of high pressure regulators have the ability to handle very high pressures and very low flows. These valves

More information

Series Way Ball Valve Threaded. SERIES 38 3-Way. Easy to Automate! See automated data sheets for pre-sized assemblies 38-TH-0025-XXX-T

Series Way Ball Valve Threaded. SERIES 38 3-Way. Easy to Automate! See automated data sheets for pre-sized assemblies 38-TH-0025-XXX-T This investment cast 3-way valve can be an economical option for flow patterns that normally require multiple 2-way valves. Available in L or T port configurations, this valve is excellent for diverting

More information

Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators

Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators July 2010 W3716 W3507 Type 1808 Type 1808A Figure 1. Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators

More information

Pressure Dump Valve Service Kit for Series 3000 Units

Pressure Dump Valve Service Kit for Series 3000 Units Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator

More information

Hip Air Operated Valves

Hip Air Operated Valves Hydraulic & Offshore Supplies Hip Air Operated s YOUR GATEWAY TO GLOBAL SUPPLY HOSE ASSEMBLIES PRESSURE TESTING WALFORM EQUIPMENT PACKAGES FLANGES PIPE & TUBE Air Operated s High Pressure Equipment Company

More information

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator.

RS(H)10,15 USER MANUAL. Read the complete manual before installing and using the regulator. RS(H)10,15 USER MANUAL Read the complete manual before installing and using the regulator. WARNING INCORRECT OR IMPROPER USE OF THIS PRODUCT CAN CAUSE SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE. Due to

More information

Type CT88 Backpressure Regulator

Type CT88 Backpressure Regulator Instruction Manual Type CT88 July 2016 Type CT88 Backpressure Regulator Table of Contents Introduction...1 Specifications...2 Principle of Operation...2 Installation...3 Overpressure Protection...4 Startup...4

More information

Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP

Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Model No. 80-651 Rotary Agitator INTRODUCTION Binks SG-2 TM Plus Rotary 2 Qt. Pressure Cup is ideal for component spraying and industrial applications where

More information

RG1200 Service and Repair Manual

RG1200 Service and Repair Manual Dive Rite RG 1200 Regulator Service and Repair Manual Page 1 Text and Photography by Pete Nawrocky Copyright ( ) 1999-2000, Lamartek, Inc., dba Dive Rite RG1200 Service and Repair Manual First Stage.........................................

More information

Bladder Accumulators. General Information. Bladder Accumulators. Introduction. Accumulator Function. Why use a Bladder Accumulator?

Bladder Accumulators. General Information. Bladder Accumulators. Introduction. Accumulator Function. Why use a Bladder Accumulator? General Information Introduction Accumulator unction Bladder accumulators provide a means of regulating the performance of a hydraulic system. The design of the Stauff bladder accumulator makes use of

More information

Storage Systems and Accessories

Storage Systems and Accessories Storage Systems and Accessories High Pressure Air and Inert Gases 4500-6000 PSIG DOT and ASME Cylinders High Pressure Storage Systems If an application requires storage, either in the form of a single

More information

FILTER TYPE PRESSURE SNUBBER

FILTER TYPE PRESSURE SNUBBER FILTER TYPE PRESSURE SNUBBER Pressure oscillations and other sudden pressure changes can affect the delicate mechanisms of a pressure gauge or pressure transmitter. This can result in either complete failure

More information

Clean Regulator/Fluororesin Type

Clean Regulator/Fluororesin Type Clean egulator/fluororesin Type Series Washing/ssembly Procedure Washing parts: ody, Valve diaphragm and Diaphragm Parts Degreasing washing DI water washing lcohol washing ssembly Inspection Wetted part

More information

Installation, Operation, and Maintenance Manual

Installation, Operation, and Maintenance Manual Installation, Operation, and Maintenance Manual Welker The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for the installation, operation, and

More information

Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES. ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified

Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES. ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified TYPE G-4 DESCRIPTION FIG 2042 - Bronze FIG 2043 - Bronze

More information

Products Compliant with the Transportable Pressure Equipment Directive (TPED)

Products Compliant with the Transportable Pressure Equipment Directive (TPED) Swagelok Products Compliant with the Transportable Pressure Equipment Directive () 1 www.swagelok.com Swagelok Products Compliant with the Transportable Pressure Equipment Directive () Products Double-ended

More information

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO

Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Nickel-Plated Brass Right Angle Flow Control Valves NPTF/Inch Series GSCU, GMCU, GSVU, GMVU, GSCO, GMCO Swivel Design : Meter-Out, Meter-In and Needle Orifice Tube Diameter OD: 1/8, 5/2, 1/4, 5/16, /8

More information

!!!! SERVICE MANUAL PRESSURE POT 2 GALLON. Service Manual: LT Washington St 931 Progress Ave., #7

!!!! SERVICE MANUAL PRESSURE POT 2 GALLON. Service Manual: LT Washington St 931 Progress Ave., #7 EXEL North America, Inc. EXEL Industrial Canada, Inc. 1310 Washington St 931 Progress Ave., #7 West Chicago, IL 60185 Scarborough ONT, M1G 3V5 Ph : (800) 573 5554 Ph : (800) 450 0655 Fx : (800) 664 1511

More information

PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.

PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.

More information

Model 4000 Pressure Controller

Model 4000 Pressure Controller FEATURES Multiple Configurations The 4000 series pressure controller can be configured into either proportional only or proportional plus reset mode with a minimum of parts. Rugged Design Die cast aluminum

More information

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection

Type 1367 High-Pressure Instrument Supply System with Overpressure Protection Instruction Manual D100343X012 Type 1367 November 2017 Type 1367 High-Pressure Instrument Supply System with Overpressure Protection TYPE 252 FILTER 2ND-STAGE TYPE 67CF FILTER-STYLE REGULATOR INLET TYPE

More information

1301 Series High-Pressure Regulators

1301 Series High-Pressure Regulators 1301 Series High-Pressure Regulators ulletin 71.1:1301 November 2011 CONTROL SPRING DIAPHRAGM DISK HOLDER E SPARE DISK VALVE DISK P1025 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm

More information

1301 Series High-Pressure Regulators

1301 Series High-Pressure Regulators Instruction Manual Form 1111 Types 1301F and 1301G March 2013 1301 Series High-Pressure Regulators! WARNING Failure to follow these instructions or to properly install and maintain this equipment could

More information

Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator

Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator January 2009 Type 310A-32A Pressure Reducing Regulator and Type 310A-32A-32A Working Monitor Regulator Introduction The Type 310A pilot-operated high-pressure regulator (Figure 1) is used where high capacity

More information

HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT

HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT HIGH PRESSURE TECHNOLOGY HYDRAULICS PNEUMATICS TESTING EQUIPMENT Ultra Valve cross sections Handle Gland with packing of copper aluminium alloy for smooth running Body Non- stem of 17-4 PH prevents scoring

More information

Continental Industries TRANSITION FITTINGS or FAX Visit

Continental Industries TRANSITION FITTINGS or FAX Visit Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

Installation, Operation, and Maintenance Manual

Installation, Operation, and Maintenance Manual Installation, Operation, and Maintenance Manual Welker Instrument Supply Pressure System Model WIC The information in this manual has been carefully checked for accuracy and is intended to be used as a

More information

Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.

Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8 to 1 (6mm to 25mm) O.D. Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied

More information

PRESSURE REGULATORS GAS PRESSURE REDUCING

PRESSURE REGULATORS GAS PRESSURE REDUCING GAS PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY

More information

1305 Series Pressure Reducing Regulators

1305 Series Pressure Reducing Regulators Instruction Manual Form 1095 1305 Series October 2009 1305 Series Pressure Reducing Regulators! Warning Fisher regulators must be installed, operated, and maintained in accordance with federal, state,

More information

PNEUMATIC PRESSURE CONTROLLERS

PNEUMATIC PRESSURE CONTROLLERS PNEUMATIC PRESSURE CONTROLLERS VARIABLE VOLUME PRESSURE CONTROLLER MODELS: V-1 R AND V-2R The 3D Variable Volume Pressure Controller is available for requirements of 0-1,000 psi and 0-6,000 psi in absolute

More information

Hydrogen Valves, Fittings and Tubing

Hydrogen Valves, Fittings and Tubing Hydrogen Valves, Fittings and Tubing utech is a leading brand of high-pressure valves, fittings and tubing designed to meet the critical requirements of today s most severe applications. We prove our commitment

More information