Nugget 120 V14 Series
|
|
- Vivien Barker
- 6 years ago
- Views:
Transcription
1 Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus compatible Flexible single step expansion Technical Data Medium: Compressed air, filtered to 40µm, lubricated or non-lubricated Operation: Spool valve, indirectly actuated. Cylinder ports in valve or base Mounting: On sub-base or manifold Port Size: Operating Pressure: Maximum bar. For details see overleaf Flow Characteristics: Size Function C b A l/min Cv Kv /2 4,92 0,23 17, ,17 1,02 /3 3,22 0,44,7 77 0,79 0,6 Ambient Temperature: -20 C to +0 C Pilot models -20 C to +0 C Solenoid models *Consult our Technical Service for use below +2 C Materials Aluminium alloy body. Glass filled PA (nylon) or glass filled PPS (polyphenylene sulphide) end caps. Glass filled PBT (polybutylene terephthalate) solenoid adapters Aluminium alloy pistons and spool with HNBR (hydrogenated nitrile) seals. Aluminium alloy Sub-bases and Manifolds with NBR (nitrile butadiene) gaskets. Ordering Information To order, quote model number and voltage code from tables overleaf, e.g. VB17A-B3A for a Solenoid Pilot Actuated, Spring Return model fitted with a 24 V d.c. coil and screwdriver operated manual override. /2 /2 Twin Supply /3 All ports blocked mid position /3 Centre open exhaust mid position /3 Centre open pressure mid position For further technical data on Multipole Systems and complete Valve Islands see Section /9 N /UK
2 Nugget 0, V Series General Information /2 Solenoid Actuated Valves, supplied with gaskets as indicated Symbol Model Manual Pilot Supply Operator Return Operating Pilot Weight Spares kit Mounting Override (Gasket Type) Pressure (bar) Pressure (bar) (kg) Option VB17A-B*A VB17A-B31*A Internal (W) Solenoid Spring 1, ,1 V316-K30 All Bases VBA-B*A VBA-B31*A External (X) Solenoid Spring -0,9-1,2-0,1 V316-K30 Sub-bases 1 3 VBF7A-B*A VBF7A-B31*A Internal Twin Supply (Z) Solenoid Spring -0,9-1,2-0,1 V316-K30 Single Sub-base and Manifold VBE7A-B*A VBE7A-B31*A Independent External (Y) Solenoid Spring -0,9-1,2-0,16 V316-K30 Single Sub-base and Manifold VB11A-B*A VB11A-B31*A Internal (W) Solenoid Solenoid 1, , V316-K30 All Bases / VB22A-B*A VB22A-B31*A External (X) Solenoid Solenoid -0,9-1,2-0, V316-K30 Sub-bases 1 3 VBFFA-B*A VBFFA-B31*A Internal Twin Supply (Z) Solenoid Solenoid -0,9-1,2-0, V316-K30 Single Sub-base and Manifold VBEEA-B*A VBEEA-B31*A Independent External (Y) Solenoid Solenoid -0,9-1,2-0,23 V316-K30 Single Sub-base and Manifold /3 Solenoid Actuated Valves, supplied with gaskets as indicated Symbol Model Manual Pilot Supply Operator Mid- Return Operating Pilot Weight Spares kit Mounting Override (Gasket Type) Position Pressure (bar) Pressure (bar) (kg) Option VB611A-B*A VB611A-B31*A Internal (W) Solenoid APB Solenoid 1, ,22 V317-K30 All Bases / VB622A-B*A VB622A-B31*A External (X) Solenoid APB Solenoid -0,9-1,2-0,22 V317-K30 Sub-base 4 2 VB6FFA-B*A VB6FFA-B31*A Internal Twin Supply (Z) Solenoid APB Solenoid -0,9-1,2-0,22 V317-K30 Single Sub-base and Manifold 4 2 VB711A-B*A VB711A-B31*A Internal (W) Solenoid COE Solenoid 1, ,22 V31-K30 All Bases / VB722A-B*A VB722A-B31*A External (X) Solenoid COE Solenoid -0,9-1,2-0,22 V31-K30 Sub-bases VB11A-B*A VB11A-B31*A Internal (W) Solenoid COP Solenoid 1, ,22 V3-K30 All Bases / VB2A-B*A VB2A-B31*A External (X) Solenoid COP Solenoid -0,9-1,2-0,22 V3-K30 Sub-base * Insert Voltage Code from table opposite. Pressure to port must not be less than 1,2 bar. Gasket type supplied with the valve, for details see page Type Y gaskets are supplied with the Fixed Length Manifold and the Single Station Sub-base. APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure. N /UK
3 Nugget 0, V Series Pilot Actuated Valves, supplied with Sub-base gaskets Symbol Model Gasket Operator Mid- Return Operating Pilot Weight Spares kit Mounting Type Position Pressure (bar) Pressure (bar) (kg) Option VBD7A-X0090 X Pilot - Spring -0,9-1,2-0,0 V316-K30 All Bases VBDDA-X0020 X Pilot - Pilot -0,9-1,2-0,0 V316-K30 All Bases VB9DA-X0060 X Pilot Priority - Pilot -0,9-1,2-0,0 V316-K30 All Bases VB6DDA-X0020 X Pilot APB Pilot -0,9-1,2-0,0 V317-K30 All Bases VB7DDA-X0020 X Pilot COE Pilot -0,9-1,2-0,0 V31-K30 All Bases VBDDA-X0020 X Pilot COP Pilot -0,9-1,2-0,0 V3-K30 All Bases Gasket type supplied with the valve, for details see page APB = All Ports Blocked, COE = Centre Open Exhaust, COP = Centre Open Pressure *Voltage Codes Voltage Codes Power Inrush/Hold 6V d.c. 1 1, W V d.c. 2 1,7 W 24V d.c. 3 1,7 W V 0/60Hz 1 4,1/2,9 VA 24V 0/60Hz 4 4,1/2,9 VA 4V 0/60Hz 6 4,1/2,9 VA 1V 0/60Hz 3,/2, VA 240V 0/60Hz 9 3,/2, VA Electrical Details for Solenoid Operators Voltage Tolerances: ±% Rating: 0% E.D. Inlet Orifice: 0, mm Electrical Connection: DIN table C Manual Override: VB--A B*A Push button, spring return with locking facility VB--A B31*A Push button, spring return Protection Class: IP 6 (DIN 40 00) For details of connector plugs and light emitting seals see page Bases and Accessories Single Station Sub-base Single Station Sub-base Sub-base Assemblies - Side Ported Sub-base Assemblies - Bottom Ported Fixed Length Manifold Side Ported Bottom Ported VCAX**-XXXXX Single Pressure VCCX**-XXXXX Single Pressure V02-G** V1-G01 G 1 4 V2-G01 G 1 4 VCAX**-**XXX Dual Pressure VCCX**-**XXX Dual Pressure 01, 02, 04, 06, 0,, Stations Intermediate Supply/ Exhaust Plate Blanking Plate for unused station Pressure Indicator DIN-rail Mounting Kit DIN-rail VB17A-Q240G VB17A-Q00 VB17A-Q200 V3-K30 V009-C00 1 Metre Modular Sub-base End Plate Kit Tie Rod Kit Blanking Gasket Set Blanking Plug VB17R-Q0G Side Ported VB17R-Q00G Side Ported VB17A-Q04** Modular Sub-base V040-K96 Modular Sub-base V320-K01 Manifold G 3 VB17R-Q020G Bottom Ported VB17R-Q01G Bottom Ported V320-K02 Manifold G 1 4 ** = 02 to 16 stations.(01, 02, 04, 06, 0,, stations for Fixed Length Manifold) **-** = 01 to 1 to indicate position of Dual Pressure Blanking Plate. See page 6 7/9 N /UK
4 Nugget 0, V Series VB*7A Models /2 Single Solenoid Valves VB**A Models /2 Double Solenoid Valves 0 17 Manual Override A/F Manual Override 1, 1, 1 9 VBE7A Models /2 Single Solenoid Valves With Independent External Pilot Supply VBEEA Models /2 Double Solenoid Valves With Independent External Pilot Supply Independant External Pilot Supply Independant External Pilot Supply '' '' '' 1 20 Manual Override A/F Manual Override 3, M 39,2 1 1, 7,7 M 41,2 4 63,7 1, VB***A Models /3 Double Solenoid Valves 3 Manual Override 1, N /UK
5 Nugget 0, V Series VBD7A-X0090 /2 Single Pilot Valve VB**A Models /2 Double Pilot Valves '' '' '' 2 2 1, M Pilot 4,2 2 A/F 1, 3 M 4,2 Pilots 2 4, 1, VB*DDA Models /3 Double Pilot Valves Surface Mounting Details 32 '' 117 '' M3 1,2 M Pilots 3 4, 1, 4,2 67 Functional Valve Gaskets For Modular Sub-base mounting, gaskets supplied with the valve must be used. For Single Station Sub-base and Fixed Length Manifold mounting, gaskets supplied with the base must be used except for Twin Supply Valves where gaskets supplied with the valve must be used. For Modular Sub-base V041-C9 - Internal Pilot Supply Gasket Gasket Type: W supplied with all internal pilot supply valves '' '' '' Black For Fixed Length Manifold and Single Station Sub-bases '' '' V23-C01 - Internal Pilot Supply Gasket Gasket Type: Y Supplied with Fixed Length Manifolds and Single Station Sub-bases V041-C96 - External Pilot Supply Gasket Gasket Type: X supplied with all external pilot supply valves and pilot operated valves '' '' '' '' Red '' V239-C01 - Twin Supply Gasket Gasket Type: Z Supplied with Twin Supply Valves '' '' '' '' '' '' '' '' '' '' Grey Yellow 7/9 N /UK.4.1.0
6 Nugget 0, V Series Pressure Options - Fixed Length Manifold Systems Single Pressure Dual Pressure Three Pressure Blanking Plug Blanking Plugs '' '' '' P 3 Pressure Options - Sub-base Systems Single Pressure Dual Pressure Gasket blanking gallery number Three Pressure Gasket blanking galleries 1, 3 and Four Pressure Gasket blanking gallery number 1 Gasket blanking galleries 1, 3 and 3 1 P P 3 Intermediate Supply Plate P 4 Five Pressure 2 x Twin Supply Gaskets blanking galleries 1, 3 and Gasket blanking galleries 3 and P P P P 3 Intermediate Supply Plate P 4 For further pressure configurations contact our Technical Service N /UK
7 Nugget 0, V Series Modular Sub-bases for DIN rail or surface mounting 76, 70, 66,6 Modular Sub-base - Side Ported (A) VB17R-Q0G Single Station Modular Sub-base 0,13 Kg 41 1,4 6 Modular Sub-base - Bottom Ported (B) VB17R-Q020G Single Station Modular Sub-base 0,137 Kg E '' 3,7 End Plate Kit - Side Ported (C) VB17R-Q00G 0, Kg Side ported end caps, 1 left hand and 1right hand. Side Ported Sub-base Modules 11, '/' '/' 1,4 24, 3,7 41,7 1,6 1,6 20, C 13,, End Plate Kit - Bottom Ported (D) VB17R-Q01G 0, Kg Bottom ported end caps, 1 left hand and 1right hand. Tie Rod Kits (E) V1B17A-Q04** Weight: (N x 0,003) + 0,004 Kg For assembly of modular sub-base and end plate kit. 2 required. G 1 /4 A 2 4 F C G ,6 Right Hand Side Left Hand Side 3 20,4 13, 3,4 (N X 20) + 6.6, Blanking Gasket Set V040-K96 0,006 Kg Set of 3 sub-base to sub-base gaskets for blanking port 1, ports 3 & or ports 1,3 &. Intermediate Supply/Exhaust Plate (F) VB17A-Q240G For additional supply and exhaust. DIN-rail Mounting Kit (G) V3-K30 For mounting on DIN-rail ** = Number of stations - 02 to 16. 0,041 Kg 0,00 Kg 29 B Bottom Ported Sub-base Modules D 23,7 '' '/' '/' G 1 /4,2 7 G 3 / 6 Bottom View 41 11,2 N = Number of stations 6,6 70, 7/9 N /UK
8 Nugget 0, V Series Modular Sub-base assemblies for DIN rail or surface mounting '' 76, 70, 66,6 41 1,4 6 Modular Sub-base Assemblies Modular Sub-base assemblies for 2 to 16 valves. VCAX**-XXXXX Weight: (N x 0,13) + 0, Kg Side ported VCCX**-XXXXX Weight: (N x 0,0) + 0, Kg Bottom ported ** = 02 to 16 '/' G 3 / '/' 1,4 24, 3,7 41,7 Dual Pressure Modular Sub-base Assemblies Modular Sub-base assemblies for 2 to 16 valves. Allows the supply of two different inlet pressures simultaneously. VCAX**-**XXX Weight: (N x 0,13) + 0, Kg Side ported G 1 /4 2 2 Right Hand Side 4 4 Side Ported Sub-base Assembly Left Hand Side A 11, 1,6 1,6 20, 44 26,6 13, 3,0,4 3 13,, (N X 20) + 6,6, VCCX**-**XXX Weight: (N x 0,0) + 0, Kg Bottom Ported ** = 01 to 1 to indicate position of Dual Pressure Blanking Plate, e.g VBAX03-07XX indicates a station base divided into groups of 3 and 7. DIN-rail Mounting Kit (A) V3-K30 For mounting on DIN-rail 0,00 Kg 29 Bottom Ported Sub-base Assembly 23,7 '' '/' '/' G 1 /4,2 7 Bottom View G 3 / 41 6,6 70, 6 11,2 N = Number of stations N /UK.4.1.0
9 Nugget 0, V Series Single Station Sub-base - Side Ported , 16 Single Station Sub-base V1-G01 0,23 Kg G 1 /4 side ported with pilot ports Ports 1, 2, 3, 4,, and on side Supplied with Internal Pilot Supply Gasket - V23-C01 For Twin Supply Valves, gasket No. V239-C01 supplied with the valves should be used , 2 6 '' '' 16 2 M 0 Single Station Sub-base - Bottom Ported 67 6, 32 Single Station Sub-base V2-G01 0,23 Kg G 1 4 Bottom ported with pilot ports Ports 1, 2, 3, 4,, and on bottom Supplied with Internal Pilot Supply Gasket - V23-C01 For Twin Supply Valves, gasket No. V239-C01 supplied with the valves should be used '' '' '' M 23 2, 7/9 N /UK
10 Nugget 0, V Series Fixed Length Manifold , 2, 6,6 1,9 A B (2 - Stations) G 1 /4,2 G 3 / 36, Type No. of stations A B Weight (Kg) V02-G ,1 V02-G ,2 V02-G ,39 V02-G ,44 V02-G0 0 0,693 V02-G ,4 V02-G ,997 Supplied with Internal Pilot Supply Gaskets V23-C01. For Twin Supply Valves, gasket No. V239-C01 supplied with the valves should be used. Blanking Plugs For dual pressure supply on Fixed Length Manifold V320-K01 For ports 3 & on Fixed Length Manifold V320-K02 For port 1 on Fixed Length Manifold 0,00 Kg 0,00 Kg Blanking Plate VB17A-Q00 0,0 Kg Blanking Plate for blocking off unwanted station. Supplied with gaskets for Sub-base and Manifold mounting. 1, Intermediate Supply/Exhaust Module VB17-Q240G 0,03 Kg G 1 4. Provides additional porting on Modular Sub-base or Fixed Length Manifold systems. Occupies one valve station. Supplied with gaskets for Sub-base and Manifold mounting.,1.6 '' Can be used to: Improve supply flow Increase exhaust capacity Pneumatically separate valves on Valve Island for fail safe in emergency Supply and exhaust Twin Supply Valves N /UK.4.1.
11 Nugget 0, V Series 1 2,4 A DIN Rail Mounting Kits V3 K30 0,00 Kg Kit for mounting side ported modular sub-bases on DIN 467-3, BS and CENELEC EN mounting rail 43 1 DIN-rail V009-C00 1 Metre 0,3 Kg A B C Blanking Gasket Set V040-K96 0,006 Kg For dual or Multi-pressure Supply on Modular Sub-base. Set of 3 sub-base to sub-base gaskets for blanking port 1, ports 3 & or ports 1,3 &. (A) Gasket for blanking ports 1, 3 and. (B) Gasket for blanking port 1 (C) Gasket for blanking ports 3 and. Pressure Indicator VB17A-Q200 0,003 Kg G 1 4 port plug with integral pressure indicator. Replaces standard port plugs. Minimum 3 bar operating pressure. Accessories For Connecting Plugs and Light Emitting Seals see page Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. 7/9 N /UK
Nugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
More informationSPCH/ Blowing block
> > for linear stretch blow moulding machines > > Compact and safe design > > Best suited for PET bottles up to litres, depending on cycle time Technical features Medium: Compressed air (purity class 3..3
More informationPneumatic spool valve islands
Pneumatic spool valve islands P7.GB.R MEGA SPOOL VALVE ISLANDS MEGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their
More informationPneumatic valve islands
Pneumatic valve islands The MEGA solenoid air operated spool valve JOUCOMATIC offers a concept of solenoid air operated spool valves which can be fitted together to form islands. Due to its new patented
More information4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
More informationSOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
More informationSPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
More informationV83 series Redundant valve manifold systems - Modular with bypass 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
V8 series Redundant valve manifold systems - Modular with bypass oo Safety, oo Availability and oo Safety and Availability > > Modular design - Maxseal valves > > able terminations inside coil housing
More informationValves ISO 5599/1 ISO 1, 5/2-5/3, electrically operated, with CNOMO pilot
ISO 1, - 5/3, electrically operated, with CNOMO pilot Executions 0300 ISO1E50 NOTE: FOR VALVES WITH PILOT IN LINE SEE PAGE.111.1 Technical data 03030 ISO1E51 03037 ISO1E5 03031 ISO1E70 0303 ISO1E71 03043
More informationValves to ISO 5599/1 standards pilot and solenoid actuated size
Series UDS ISO pilot and solenoid actuated size 1 - - 3 DESCRIPTION Valves series "UDS ISO" are produced in the and pneumatic functions according to the interface to ISO 5599/1 standards and they are mounted
More informationR84G - Excelon Plus Modular System Pressure regulators
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Easy to read flush mounted integrated pressure gauge as
More informationVPPC02, VPPC08 3-way proportional pressure control valve, electronic closed loop control
VPPC, VPPC -ay proportional pressure control valve, > > Nominal diameter,, flange version G/ > > Visual function display (optional) > > Compact and lighteight design > > Field bus capable as part of a
More informationSpool compact valves pilot and solenoid actuated G 1/8 - G 1/4
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4 DESCRIPTION Valves series "MEK", in the 5/ and pneumatic functions, have been realized with compact overall dimensions yet assuring high flow.
More informationseriesuds ISO Valves to ISO 5599/1 standard
seriesuds ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and pneumatic functions according to the interface to ISO 5599/1
More informationTECHNICAL CHARACTERSTICS
and solenoid valves spool version GM - GL series Type of valves with dorsal consumption: GM-...series with integrated connections GL-...series without connections TECHNICAL CHARACTERSTICS Ambient temperature:
More information3-Way Safety Block DSV
3-Way Safety Block DSV DSV 10 - M DSV 10 - M - T-ball DSV 10 - EY 1. Description 1.1. GENERAL The 3-way safety block is used to shut off and discharge hydraulic accumulators or consumers. It complies with
More informationSPOOL VALVES. ISO 15407/1 - Sizes Series PA568-GB-R3. All leafl ets available at:
SPOOL VLVS ISO 07/ - Sizes 0-0 Series 8-9 P68-GB-R ll leafl ets available at: www.ascojoucomatic.com FTURS These spool valves which comply with the VDM 6 standard offer the advantage of being smaller than
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8... 3/4 (ISO G/PTF) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationVALVES ISO 5599/1, SERIES IPV-ISV
VALVES ISO 99/1, SERIES IPV-ISV The assembly surface dimensions of ISO1 and ISO2 valves are to ISO99-1. They are available in the -way versions with 2 and 3 positions and with pneumatic or solenoid actuation.
More informationFEPA PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG
PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG TECHNICAL CHARACTERISTICS Number of ways / positions : 3/2, 3/3, 5/2, 5/3, 5/4 Nominal sizes (ND) : 4, 6, 9, 12 Medium : compressed
More informationSolenoid Valves VUVG Overview
Solenoid Valves VUVG Overview Universal valve Combination of basic valve and E-boxes Width 10 mm and 14 mm In-line valves VUVG-L and VUVG-S Sub-base valves VUVG-B Internal or external pilot air supply
More informationBL68 - Olympian Plus, plug-in system Filter/regulators and lubricators
>> Port size: 3/4... /2 (ISO G/ PTF) >> Complete air processing units pre-assembled, ready to install Technical features Medium: Compressed air only Maximum operating pressure: 7 bar (246 psi) Pressure
More informationBooster Regulator/Air Tank
Booster Regulator/Air Tank Increase factory air pressure by up to 4 times! Air-only operation requires no power supply, reduces heat generation, and Boost pressure allows easy installation. NEW Renewed
More informationseries UDS ISO to ISO 5599/1 standard pilot and solenoid actuated sizes DESCRIPTION TECHNICAL DATA MATERIALS SPARE PARTS
series UDS ISO Valves to ISO 5599/1 standard pilot and solenoid actuated sizes 1 - - 3 DESCRIPTION Valves series UDS ISO are produced in the and functions according to the interface to ISO 5599/1 standard
More informationB74G - EXCELON Modular System General purpose filter/regulator
> Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory
More informationISO Sub-bases. Port sizes G 1 /4 - G1 and 1 /4NPT - 1 /2NPT. Sub-bases tovdma specification, for ISO sizes #1, #2, #3 and #4
Port sizes 1 / - 1 and 1 /NPT - 1 /NPT Sub-bases tovd 3 specification, for ISO sizes #1, #, #3 and # Universal bases for ISO sizes #1 and #, side and bottom ported Technical Data edium: See individual
More informationNon-Return Valves T55 Series
T55 Series In-Line, Non-Return Valves M5, 1 8", 1 2" BSPP, BSPT, NPT Permit free flow of air in one direction only Simple, reliable design Light weight Silicone free Low cracking pressure Technical ata
More informationR18 General purpose pressure regulators
> > Port size: / & (ISO G, PTF) > > Can be installed at any point in the compressed air system without regard to accessibility pilot regulator can be installed in the most convenient location > > Accurate
More informationfiltered air without lubricant. If lubricated air is used, it is recommended to use ISOVG32 oil and to never interrupt lubrication.
> Series EN valves and solenoid valves Valves and Solenoid valves Series EN, CC - CO - CP With outlets on the body - For individual or manifold assembly Size 16-19 mm» Mounting on any flat surface» Reduced
More informationPneumatic Function Fittings Metric & Inch
Metric & nch Sensor Fitting Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage Simpler pneumatic systems liminates need for electrical reed switches
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationMULTIPOL - VDMA. PNEUMATIC SPOOL VALVE ISLANDS VDMA ISO 02 - ISO 01 (G1/8 - G1/4) designed for connection to a PLC by multiwire cable
P8.G.R PEUATIC SPOOL VALVE ISLADS VDA - ISO - ISO (G/8 - G/) designed for connection to a PLC by multiwire cable ULTIPOL - VDA IPUT IPUT OUTPUT OUTPUT OUTPUT IPUT IPUT ULTIPOL - VDA Pneumatic spool valve
More informationInverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationProportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
More informationMECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET
CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES ENCLOSURE OPERATING TEMPERATURE 20 C/+60 C COVER Diecast aluminium (anodised) WEIGHT CSN 5 3.5 kg CSN 8 5 kg CSN
More informationPilot Check Valve: Metal Body Type
INFORMATION Pilot Check Valve: Metal Body Type The use of a metal body improves strength and environmental resistance. Temporary intermediate stops are possible. *1 *1 Precise intermediate stops are not
More informationSpecifications. Model VEX Operating style Fluid Proof pressure Max. operating pressure
Power Valve Regulator Valve Series 1 Large Capacity Relief Regulator 3 port large capacity poppet exhausting regulator equipped with a relief port the same size as the connection port. Specifications Model
More informationValves series A1 1/2, 3/2, electrically operated
1/, 3/, electrically operated Executions 3/ NC 0113 A1E430 3/ NO 3 0 A1E431 1 3 3/ 03 A1E43 3/ NC 3/, 0137 A1K430 08 A1K43 Series of spool valves, with static seals, high flow, for panel mounting. Coils
More informationSolenoid valves CDSV, Clean Design
Key features Innovative Versatile Reliable Proven valve technology combined with a highly resistant polymer material. valve position 2 solenoid coils Flow rate 300 650 l/min Valve width 24 mm Connected
More informationHand slide valves W/VBOH
Hand slide valves W/VBOH Hand slide valves W/VBOH Product range overview Version Valve function Version Type Pneumatic connection 1 Pneumatic connection 2 qnn Page/ Internet [l/min] Hand slide valves 3/2-way,
More information1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type
Flow Control Valve Series LVM.. high flow rates (8 l/min) flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports proportional flow-sharing
More informationHand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
More informationProportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
More informationProp. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
More informationInverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
More informationProportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
More informationInverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
More informationElectrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
More informationMATERIALS SPARE PARTS. iting pressure (b. Spool compact valves series MEK
Spool compact valves pilot and solenoid actuated G 1/8 - G 1/4 Valves series "MEK", in trie and pneumatic functions, have been realized with compact overall dimensions yet assuring high flow. The kind
More informationAir preparation units
Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
More informationseriesek Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 DESCRIPTION Spool valves series EK 2.43 MATERIALS TECHNICAL DATA SPARE PARTS
Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, 5/ and pneumatic functions. The piloting solenoid valve can be assembled perpendicular
More informationF68G - Olympian Plus plug-in system General purpose filter
> > Port size: /... / (ISO G/ PTF) > > Olympian Plus plug in system > > Large filter element area provides minimum pressure drop > > Effective liquid removal and positive solid particle filtration Technical
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide range of
More informationSeries 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position
3 Cv =.73-2.00 Series 4 Cv=.73-2.00 Air-Pilot operated valves Series 4: 1/8,, 3-way/2-position; 5-way/2-position; 5-way/3-position 1/2 5-way/2-position The pneumatically operated,3-way/2-position, 5-way/2-position
More informationValves, manually operated
Valves, manually operated Valves, manually operated Key features VHEM-P K/O-3-PK-3 H-3-¼-B KH/O-3-PK3 TH/O-3-PK3 VHEM-L F-3-¼-B Innovative Versatile Reliable Easy to mount Small and compact for a wide
More informationSafety and Shut-off Block SAF/DSV
1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or user units. It complies with the relevant safety standards in accordance with
More informationType 4708 Supply Pressure Regulator
Type 708 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point range 0.5 to bar (8 to 90 psi) The pressure regulator
More informationB84G - Excelon Plus Modular System General purpose filter/regulator
> Port size: 3/8" to 3/4" (PTF/ISO G) > Excelon Plus design allows in-line installation or modular installation with other Excelon Plus products > Push to lock adjusting knob with built in tamper resistant
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationSolenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
More informationPressure reducing valve, pilot operated
Pressure reducing valve, pilot operated RE 26928/09.07 Replaces: 10.97 1/8 Type 3DR Size 16 Component series 5X Maximum operating pressure 250 bar Maximum flow 220 l/min H5844 Table of contents Content
More informationOP11 OVERALL SPECIFICATIONS
The Directional Valve Series provides a compact range of manually operated directional valves for low flow applications. Because of the physical size of valves are ideally suited for mounting on small
More informationQuick Release Couplings 233 Series
Quick Release ouplings 233 Series 4mm - 9mm I/ hose 1 8" - 1 4" SP thread Low pressure drop across coupling High flow rate ompact construction One hand operation Robust construction Various connection
More informationXpress L90LS Directional Control Valve. Catalog HY /UK December, 2001
Xpress L90LS Directional Control Valve Catalog HY17-8525/UK December, 2001 Catalogue HY17-8525/UK Technical Information Xpress - general information Xpress is a valve-customization service that enables
More informationII 2G EEx ia IIC T6. Ignition protection class
ATEX General information According to 94/9/EC, a device that is to be used in an environment at risk of explosion may only be brought into the market if it satisfies the standards specified in the norm.
More informationPiloted Non-Return Valves
ed Non-Return Valves ed non-return valves are designed to protect installations: if the compressed air supply is removed, they lock the air supply to the cylinder, thus maintaining it in position. Product
More informationMULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE
SIT Group SIT -3- SIGMA MULTIFUNCTIONAL CONTROL FOR GAS BURNING APPLIANCE 9.955. Subject to change without notice Application Domestic gas appliances: central heating boilers, combi boilers, instantaneous
More information4 qwer 2/2 3/2 4/2. Intrinsically Safe. Air and Inert Gas Intrinsically Safe Valves Brass, or Stainless Steel Bodies 1/4" to 1" NPT SERIES.
qwer Air and Inert Gas Valves Brass, or Stainless Steel Bodies 1/" to 1" NPT Features Designed solely for installation in intrinsically safe areas, with properly approved and sized current and voltage-limiting
More informationSeries MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
More informationType Operating Instructions. 2/2-way solenoid valve 2/2-Wege Magnetventil Electrovanne 2/2 voies.
2/2-way solenoid valve 2/2-Wege Magnetventil Electrovanne 2/2 voies We reserve the right to make technical changes without notice. Technische Änderungen vorbehalten. Sous réserve de modifications techniques.
More informationPrecision pressure regulators LRP/LRPS
Precision pressure regulators LRP/LRPS q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement
More informationModel range*1) Switching pressure difference
Pneumatic pressure switch electromechanical actuated -...00 bar, G/2 Microswitch with gold plated contacts Intrinsically safe operation Electrical connection: connector acc. to IN EN 7530-803 (form A)
More informationInverse Proportional Pressure-Relief Cartridge, Size 10
Inverse Proportional Pressure-Relief Cartridge, Size 1 Q max = 12 l/min, p max = 3 bar Seated pilot, spool-type main stage, damped design 1 Description inverse-proportional pressure-relief valves are size
More informationPressure reducing valve, pilot operated, Model 3DR
RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features
More informationGM Series Dual-Block Multi-Function Gas Control Valves
Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GM Issue Date 0297 GM Series Dual-Block Multi-Function Gas Control Valves Figure 1: GM Series
More informationSelection of ICF made easy Save even more time with ICF
MAKING MODERN LIVING POSSIBLE Selection of ICF made easy Save even more time with ICF ICF stands for valve trains and for over five years installation and service has never been easier. This quick guide
More informationVS18/26 with PROFINET and EtherNet/IP Interface. ATEX Installation Instructions
VS18/26 with PROFINET and EtherNet/IP Interface ATEX Installation Instructions INDEX 1. INTENDED USAGE 3 2. OPERATING MANUAL ATEX 4 2.1 General conditions 4 2.2 Installation 5 2.3 Operating 5 2.4 Failures
More informationGripping modules Pneumatic 2-finger parallel gripper Long-stroke gripper for small components Gripping force 120 N..
GM Sizes 85.. 205 Mass 0.48 kg.. 2.7 kg 120 N.. 595 N Stroke per finger 16 mm.. 30 mm Workpiece weight, force-fit gripping Up to 2.3 kg Application example 3 5 3 4 2 5 2 1 1 Pneumatic double pick & place
More informationGas powered stop valves, type GPLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Gas powered stop valves, type GPLX 80-150 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Gas powered stop valves, type GPLX 80-150 Contents Page Introduction........................................................................................3
More informationMounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1.1.1 Key to the circuit diagram Circuit diagram The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationEXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
More informationCalibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
More informationType 0404 / /2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation
Type 0404 / 5404 2/2-way solenoid valve 2/2-Wege-Magnetventil Électrovanne 2/2 voies Operating Instructions Bedienungsanleitung Manuel d utilisation 1 OPERATING INSTRUCTIONS The operating instructions
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. Description 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators or consumers. It complies with the relevant safety
More informationPneumatic spool valve islands
neumatic spool valve islands A7.GB.R MGA SOOL VALV ISLANDS MGA pneumatic spool valve islands offer maximum performance along with flexibility, easy installation and simple operation. Due to their design,
More informationPneumatic Gripping Modules. Pneumatic 2-Finger Radial Grippers
Pneumatic Gripping Modules Pneumatic 2-Finger Radial Grippers Pneumatic Gripping Modules Pneumatic 2-Finger Radial Grippers 2-FINGER RADIAL GRIPPERS Series Size Page Universal Grippers GWB 676 GWB 34 680
More informationPressure regulators Manually operated Fine setting valves. Brochure
Pressure regulators Manually operated s Brochure Pressure regulators Manually operated s Qn = 9 l/min Actuating element: Push button Internal thread Poppet valve Qn = 9 l/min Actuating element: Push button
More informationDual position solenoid valve Type ICSH 25-80
Data sheet Dual position solenoid valve Type ICSH 25-80 ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2
More informationALUMINIUM TANK AND COMPENSATOR - SERIES 09
ALUMINIUM TANK AND Series 09 has been extended with the addition of an air/oil compensator. The Ø100 air/oil compensator consists of two aluminium flanges and an anodized jacket with an ISO profile, all
More informationC 0G 00 N/US
G, GP, G, GP In-line flow regulators (block form) Uni-directional Ø /... / inch, Ø 4... mm High flow performance In-line or panel mounting Adjustment can be locked aptive regulator needle will not blow
More informationPneumatic pressure switch 20DD
Sensor system: stainless steel 0,2 to 6 bar Microswitch with gold plated contacts (suitable for intrinsically safe operation) High accuracy (max. scattering < 1,5%) Excellent sealing properties (better
More informationManual Actuated Boiler Blowdown Valves
Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety
More informationAir service units series Y G1/4 to G1
Air service units series Y Series FY Filter, 12.071 Series RY+ RYP Pressure regulator, 12.076 Series FRY Filter/regulator, 12.080 Series OY Lubricator, 12.083 Series FROY Filter, Regulator, Lubricator
More informationSafety and Shut-off Block SAF/DSV
Safety and Shut-off Block SAF/DSV 1. DESCRIPTION 1.1. GENERAL The HYDAC safety and shut-off block is used to shut off and discharge hydraulic accumulators. It complies with the relevant safety standards
More information